T60 2007-63G 4.00GB RAM memory in windows 7 prof 64

I installed windows 7 64bit and the system will continue to see:
Installed 4.00 GB (3.00 GB available)
why ??

Currently I have installed Windows 7 Professional 32 bit. But I went with the T2500 processor on the T7200 that is on a 64 bit processor. I would therefore like to make the most of my computer so I think the re-installation on 64 bit.
I give the exact parameters of my computer:
- Processor: Intel T7200
- RAM 2 x 2GB 667MHz
- Seagate 500GB 7200rpm 32MB cache, 4GB SSD
- Graphics ATI Mobility Radeon X1400
Mainly I use the computer to the Internet, office work, emails and video player with DivX and MKV connected to a TV 46 "(1080p resolution - 1920x1080).
For example, the film AVATAR 1080p (20GB capacity file) when scrolling the slider a little cut, it can move to 64 bit will run faster. Are there codecs k-lite codeck pack, 64-bit?

Similar Messages

Firefox 4 using very much ram memory in windows 7

I have Windows 7, 32 bit. My laptop has '''2''' GB RAM and an Core 2 Duo processor.
I was getting on fine with the last version of Firefox, but after upgrading to Firefox 4 today, my laptop's fan comes on just about every time I load a new page or open a new tab. Memory usage seems very high compared to what it was before, it's at around 250 MB right now with just two tabs open. I am thinking of going back to an older version, I'm just not happy about this.

Hi!
Firefox 4 has introduced new technologies for rendering web pages, also by using your computer's graphics card. Please uncheck the hardware acceleration from the options menu and try again to launch firefox.

Can Thinkpad T60 be upgraded to 8GB RAM ?

Hi Team, I am owning a Thinkpad T60 [7660A42] with 4GB hosting a 64-bit Windows 7 Home Premium. Can this laptop be upgraded to 8GB RAM? If yes what other dependancies are to be considered and which RAM model should I consider to buy? Vaidu.

Hello vvaidu,I'm sorry to say that the ThinkPad T61 has the same 4GB maximum. MemoryPC2-5300 Non-Parity (NP) Double Data Rate Two (DDR2) TechnologyThe use of 667 MHz SO DIMM memory is recommended for this system.256MB, 512MB, 1GB, 2GB standard memorySupports maximum memory up to 4GBNotebooks with a Windows Vista 32-bit or previous Windows 32-bit operating system can support up to 3 GB of addressable memory.Notebooks with a Windows Vista 64-bit operating system can support up to 4 GB of addressable memory.Recommended for memory expansion are 512 MB, 1 GB, and 2 GB PC2-5300 DDR2 SDRAM 667 MHz SO DIMM

Increase Ram memory

Hello, Please advise that its possible to Increase my laptops RAM and How do I select the exact memory card if the RAM can be increased or provide the exact Memory card I can replace or increase the RAM with. RAM
Memory slots
Total memory slots 2
Used memory slots 1
Free memory slots 1
Memory
Type DDR3
Size 4096 MBytes
Channels # Single
DRAM Frequency 665.1 MHz
CAS# Latency (CL) 9 clocks
RAS# to CAS# Delay (tRCD) 9 clocks
RAS# Precharge (tRP) 9 clocks
Cycle Time (tRAS) 24 clocks
Command Rate (CR) 1T
Physical Memory
Memory Usage 45 %
Total Physical 3.95 GB
Available Physical 2.17 GB
Total Virtual 9.81 GB
Available Virtual 7.34 GB
SPD
Number Of SPD Modules 1
Slot #1 Motherboard
Manufacturer Hewlett-Packard
Model 17FD (CPU1)
Version 0593110000204610000620100
Chipset Vendor Intel
Chipset Model Sandy Bridge
Chipset Revision 09
Southbridge Vendor Intel
Southbridge Model HM65
Southbridge Revision 05
BIOS
Brand Hewlett-Packard
Version F.1C
Date 1/23/2013
PCI Data
Slot PCI-E x16
Slot Type PCI-E x16
Slot Usage In Use
Data lanes x16
Slot Designation J5C1
Characteristics 3.3V, Shared, PME, Hot Plug
Slot Number 0
Slot PCI-E x4
Slot Type PCI-E x4
Slot Usage In Use
Data lanes x4
Slot Designation J6C1
Characteristics 3.3V, Shared, PME, Hot Plug
Slot Number 1
Slot PCI-E x1
Slot Type PCI-E x1
Slot Usage In Use
Data lanes x1
Slot Designation J6C2
Characteristics 3.3V, Shared, PME, Hot Plug
Slot Number 2
Slot PCI-E x1
Slot Type PCI-E x1
Slot Usage In Use
Data lanes x1
Slot Designation J6D2
Characteristics 3.3V, Shared, PME, Hot Plug
Slot Number 3
Slot PCI-E x1
Slot Type PCI-E x1
Slot Usage In Use
Data lanes x1
Slot Designation J7C1
Characteristics 3.3V, Shared, PME, Hot Plug
Slot Number 4
Slot PCI-E x1
Slot Type PCI-E x1
Slot Usage In Use
Data lanes x1
Slot Designation J7D2
Characteristics 3.3V, Shared, PME, Hot Plug
Slot Number 5
Slot PCI-E x16
Slot Type PCI-E x16
Slot Usage In Use
Data lanes x16
Slot Designation J8C2
Characteristics 3.3V, Shared, PME, Hot Plug
Slot Number 6 Operating System
Windows 7 Home Premium 64-bit SP1
CPU
Intel Core i3 2330M @ 2.20GHz 53 °C
Sandy Bridge 32nm Technology
RAM
4.00GB Single-Channel DDR3 @ 665MHz (9-9-9-24)
Motherboard
Hewlett-Packard 17FD (CPU1) 54 °C
Graphics
Generic PnP Monitor (1680x1050@60Hz)
P224W (1680x1050@60Hz)
Intel HD Graphics Family (HP)
1024MB ATI Radeon HD 6490M (HP)
Storage
698GB Western Digital WDC WD7500BPVT-60HXZT3 (SATA) 38 °C
3GB USB Device (USB)
Optical Drives
hp CDDVDW TS-L633R
Audio
IDT High Definition Audio CODEC

Hi, All information you need: RAM
Memory slots
Total memory slots 2
Used memory slots 1
Free memory slots 1
Memory
Type DDR3
Size 4096 MBytes
Channels # Single
DRAM Frequency 665.1 MHz
CAS# Latency (CL) 9 clocks
RAS# to CAS# Delay (tRCD) 9 clocks
RAS# Precharge (tRP) 9 clocks
Cycle Time (tRAS) 24 clocks
Command Rate (CR) 1T It currently has 4GB in one slot. You can simply buy 1 more 4GB stick using information in bold and install on slot #2 Regards.

What is my maximum ram memory capacity on Lenovo G575?

I have bought a lenovo laptop -g575(model: 20081? and it has only 2 GB of ram memory, and if anyone could tell me what is my maximum ram capacity? I currently own 2GB ram, SO-DIMM DDR3, 1333MHz.. I was thinking to get 8gb but im not sure if my laptop will reject it. Please help. Thank you!
Solved!
Go to Solution.

hi StefanThePribic,
Welcome to Lenovo Community Forums!
If you system model has two overlaying slots
It should work with 8 GB two 4GB cards
You can also take a look at this
http://www.crucial.com/upgrade/Lenovo-memory/Essential+%2F+Value+Line/Lenovo+G575-upgrades.html
Regards
Solid Cruver
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

How to change Virtual Memory in Windows 7 with SSD and 16GB RAM

I have SSD Samsung 850Pro with OS Windows 7 and have installed physical RAM 16GB.
In Adobe Help/Optimize performance/Photoshop written :
" To change Virtual Memory in Windows 7 and Vista, quit all applications and then do the following:
Choose Start > Control Panel, and double-click System.
Choose Advanced System Settings in the Tasks list.
Select the Advanced tab and click Settings in the Performance section.
Select the Advanced tab and click Change.
Deselect Automatically Manage Paging File Size For All Drives.
Click each hard disk letter to show the available space on that drive. Select a hard drive that has three times the amount of your computer’s installed RAM and doesn’t contain a scratch disk.
Select Custom Size, and type the amount of your physical RAM plus 300 MB in the Initial Size box. Type three times the amount of your computer’s installed RAM into the Maximum Size box.
Click Set, and then click OK. Continue to click OK to exit all dialog boxes.
Restart the computer: If you have applications open, select Restart Later, close your applications, then restart Windows. Otherwise, click Restart Now. "
Select Custom Size, and type the amount of your physical RAM plus 300 MB in the Initial Size box. Type three times the amount of your computer’s installed RAM into the Maximum Size box.
I have 16GB RAM
in the Initial Size box : 16384+300=16684MB
in the Maximum Size box:16684x3=50052MB
but in the description of SSD written :
" In order to address any potential lack of memory capacity, the Windows operating system automatically generates a block of virtual memory (pagefile.sys) on the C: drive. For example, a Windows® 7 64-bit system with 4 GB of physical memory would generate 4 GB of virtual memory at boot time.
In the past, before PC Memory (DRAM Modules) were available in high volume, PCs needed to utilize some HDD space to address any memory shortcomings. Today, with PCs featuring 4 GB of memory or more, it is possible to reduce or even eliminate the use of virtual memory. Additionally, using expanded physical memory, rather than creating virtual memory on the SSD, has performance and reliability advantages for the entire system. Some applications may require the use of virtual memory. In this case, please consider your specific application requirements before disabling this feature!!! ”..."SET virtual memory in the Initial Size Box :200MB and in the Maximum Size box: 2048MB"
what is the right choice ???
Please Help

Windows set to default virtual memory : 16348 MB =16GB !
But SSD program Samsung Magician wants virtual memory between in the Initial Size Box :200MB and in the Maximum Size box: 2048MB or 4096MB. If more than 8GB suggests that SSD will work slowly.
Perhaps the description in Adobe execution Help / Optimize / Photoshop is not correct or ?

How to Copy a value of a String to the RAM memory?

Hi there,
I was wondering how to copy a String into the ram memory (consider you're doing right click on THIS word and choose 'Copy'; the String's Value will be to the ram memory for a later Paste).
In my application, a user has a table and he right click on it and choose Copy. I get the value of the item (Obj) but face dificulties to add it to RAM.
my code looks like this:
 if (obj!=null) //inside I have the value (say: 12345 --< Obj.toString)
 Action copyAction = TransferHandler.getCopyAction();
 int id = ActionEvent.ACTION_PERFORMED;
 String name = (String) copyAction.getValue(Action.NAME);
 long l = EventQueue.getMostRecentEventTime();
 copyAction.actionPerformed(new ActionEvent(XXXXXXX, id, name, l ,0));
 ///what comes in the XXXXXXX
 }I tried, instead of the XXXXXXX, to put Obj or Obj.toString but...nothing.
Anyone?

Thanks,
should implement ClipboardOwner
and do this:
 StringSelection stringSelection = new StringSelection( obj.toString() );
 Clipboard clipboard = Toolkit.getDefaultToolkit().getSystemClipboard();
 clipboard.setContents( stringSelection, this );
@Override
 public void lostOwnership(Clipboard clipboard, Transferable contents)
 //do nothing!
 }

HI, I HAVE A MacBook Pro 2.3GHz dual-core Intel i5 AND I WAN'T TO UPGRADE THE HARD DRIVE UP TO 750GB AND ALSO THE RAM MEMORY TO 8GB. WHAT SPECIFIC MODEL OF HARD DRIVE AND RAM MEMORY SHOULD I BUY??? THANKS

HI, I HAVE A MacBook Pro 2.3GHz dual-core Intel i5 AND I WAN'T TO UPGRADE THE HARD DRIVE UP TO 750GB AND ALSO THE RAM MEMORY TO 8GB. WHAT SPECIFIC MODEL OF HARD DRIVE AND RAM MEMORY SHOULD I BUY??? THANKS

No need to type in all caps - we HEAR you!
I would take a look at the internal drives offered by both Crucial (click the link "Internal Hard Drives Now Available") and OWC. I would stay away from Western Digital drives as they seem to have problems on a number of Mac models.
You can also shop for RAM at Crucial and OWC - just select the System Scanner tab at the Crucial website to find out which memory is right for your machine.
Good luck,
Clinton

PDA RAM memory usage

Hi all,
We have created a PDA application running on SAP Mobile Infrastructure 2.5 Service Pack 18 Patch 1 on Windows Mobile 5 and Windows Mobile 2003 SE.
Problem description:
The problem is the RAM memory size. For WM 2003 there is no problem because there are enough PDA's with 128 mb RAM size, but the problem is there is no normal PDA running on WM 5 with 128 mb RAM size. There are only devices with 64 mb RAM.
So we are having some problems with the RAM size, and I want to watch what is in the RAM and I want to see the usage of the RAM easily when I use my application. I can switch to the Settings --> Memory and see the values, but this is not reliable and I only see the usage and not what's in the RAM.
Questions:
- Is there a tool to watch the memory and what's in the memory?
- Can someone give me some information how we can store less in RAM and more in ROM without getting a slower application?
Thanks in advance,
Bart Elshout

hi bart,
had you tried profiling you application? profiling will help you in looking which
portion of the code was consuming a lot of RAM and time.
some common ways to counter heavy application
1) lazy loading
this is very effective in a sense that only the classes required for certain
functionalities are loaded and instantiated. this can be realized by using reflection
and customized class loaders.
2) avoid caching smartsync data
when using smartsync, i don't recommend caching of your syncbo data. the lower
layer already have a cache (esp fileIO).
3) avoid rewrapping if possible
wrapping a syncbo or row into another class will make your class instance bigger.
and caching the fields in it, again will also consume some RAM.
that's only for the part of the data. now you have to consider your UI also. are you
using any UI framework?
regards
jo

N8 - Ram memory

Ive got a problem with the Ram Memory on my Nokia N8.
When i switch the phone on i have 115mb free and 131 used, this is fine and the phone works quite quickly.
However over the next few days i lose about 20 to 25mb a day resulting in less than 50mb free after only a few days which makes the phone very slow and not responsive.
I use the phone for the same things every day, calls, texts, emails, playing videos / music, taking photos and a bit of internet surfing. After closing an app the free memory goes back up but obviously something is happening to use the memory and not give it back!!!!
Id like to know what is using this memory and is there anything i can do to stop it other than switching the phone off and back on every day??
I have no such problems with my 808 so im well confused as to what is happening!

Perhaps it is Anna. It is always recommended that one updates to the latest version of firmware, as it brings reliability, performance and functional improvements. Belle and Belle Refresh greatly increase the performance and stability of the phone and make it much prettier. I'm sure that if you update, the RAM problem will go away.
But the downside to firmware updates, as you have also stated,is that some of your old apps may not work, as compatibility is not guaranteed. In these cases, you will need to contact the app developer themselves to ascertain the status of the app and its compatibility.
In conclusion, the choice is up to you. I have Belle Refresh on my N8, and i'd take that any day over losing compatibility with some apps.

8.00 GB of installed RAM/MEMORY but only 3.99 GB "usable"

Here is my system:
OS: Windows 7 Home Premium 64-Bit
CPU: Intel i5 750 @ 2.67Ghz
Motherboard: MSI P55 GD65
Ram: G.Skill 4x 2gb 240-Pin DDR3 1333 (PC3 10666) dual channel memory (8gb total)
BIOS shows 8gb of installed RAM, Task Manager shows 8gb installed RAM, Resource Manager shows 8gb installed RAM. Right-clicking My Computer > Properties shows "Installed Memory (RAM): 8.00 GB (3.99 GB usable)"
With all the research and other forums posts I found, I have:
- Tested all 4 ram sticks individually (before the G.Skill I had the same problem with 2 Kingston sticks)
- Unchecked maximum memory in msconfig.exe > BOOT > ADVANCED
- Updated BIOS to latest version (1.11 a.k.a 1.B0)
- Loaded BIOS optimized defaults
- Cleared CMOS and loaded optimized defaults again
- Tested memory with Windows Memory Diagnostics tool with no errors
- Removed CPU to check socket for bent pins...no bent pins...reseated CPU
I have not:
Enabled "Memory Remapping" in BIOS because I do not have that option available in BIOS
I did read this post about G.Skill ram: https://forum-en.msi.com/index.php?topic=178019.0 and checked by ram settings and they are automatically already at the 9-9-9-24 timings, 1T command rate.
Yikes! What else is a man to do?

Quote from: RemusM on 17-March-14, 15:34:37
OK.
Perform the following tests with 2 memory modules (4GB RAM):
1)
1.a) use the slots 1 & 2 (those close to the CPU).
Check out the usable system memory
1.b) use the slots 1 & 3
Check out the usable system memory
2) msconfig.exe / Boot / Advanced
2.a) set the max memory to 4096MB and reboot
Check out the usable system memory
2.b) unset (uncheck) the max memory setting and reboot.
Check out the usable system memory
3) use the same 2 memory modules (4GB), access the BIOS and make them run at 1066MHz (7-7-7-20 at 1.50...1.55V)
If all the above don't fix the issue, post a screenshot of the memory mapping (System Information / Hardware Resources / Memory)
Good luck.
Alright, RemusM...got some new developments here. Thanks for sticking with me....
1)
1.a) Slots 1 & 2 (single channel mode): 4gb installed, 4 gb read and usable by OS
1.b) Slots 1 & 3 (dual channel mode): 4 gb installed, 4gb read but only 1.99 usable by OS
I stopped there and did some more slot tests...and I stand corrected from my earlier comments (I had written down that each stick worked in each slot, individually, but these notes are from 5 years ago...so...however):
With only 1 stick installed (2gb), starting closest to CPU:
- Slot 2 (blue plastic slot): PC will not start, motherboard beeps 3 long beeps (ram error, from what I Googled)
- Slot 1 (black plastic slot): PC starts, 2gb read and usable by BIOS and OS
- Slot 4 (blue plastic slot): PC will not start, motherboard beeps 3 long beeps (ram error, from what I Googled)
- Slot 3 (black plastic slot): PC attempts to start (3 times, fans and lights start and then stop) and then it hangs (with fans and lights on but does not start)
Would I be right to assume my Slot 3 has been the problem all along? Or is the motherboard supposed to only start with 1 stick of ram in slot #1?
Also of note: since I first built this computer it has always took 3 attempted starts (fans and lights go and stop) to finally fire up (I know, I should have realized this red flag sooner and probably mentioned it).
Also of note: with 3 sticks installed - in slot 2,1,3 - the system reads all 6gb but only 3.99 usable by the OS again. Indicating, I would think, that only slot 2 and 1 are being used.

Is MacBook Pro 2012's RAM Memory extendable more than 8GB?

I have extended my MacBook Pro's RAM Memory upto 10 GB and its working and showing In its activity normal is MacBook extendable to 10 GB ?

MacBook Pro: How to remove or install memory - Apple Support
Here is the links for the RAM Upgrade Spec requirements needed for your specific model. It has a full comparison and spec guideline on each model and year dated

848P Neo-LS RAM-memory ?

Hi someone who ones where i can find witch ram memory i should have for my 848P neo-LS ??
I have Kingston 512 Pc3200 CL3 is that ok ?
thanks
Henke L

http://www.msi.com.tw/program/products/mainboard/mbd/pro_mbd_trp_detail.php?UID=493
The Memory Modules link on that page will give you the modules the board has been tested with. Others may work as well, but just haven't been tested.
I didn't check to see if the Kingston are in the tests, but they do work with other boards using the ICH5 chipset.

SQL query returns few rows, but holds on with several Gbs of RAM memory used

If I perform the following query:
SELECT d.DocumentGUID, d.DocumentID
FROM ImportDataBase.dbo.Document d
LEFT OUTER JOIN ContentDataBase.dbo.Document d2 ON (d.DocumentGUID = d2.DocumentGUID)
WHERE ( d2.DocumentGUID IS NULL ) -- new document in the ImportDB
OR ( d2.DocumentGUID IS NOT NULL AND d.QueryContent <> d2.QueryContent ) -- modified document in the ImportDB
It returns around 1000 rows and takes about 3 minutes to complete
It also raises up the RAM memory used from 2GB to 9GBs.
This memory used will remain used untill I restart the server. I have no need to make use of that memory, I already copied the returned rows of that query into a note pad for example. And any other reason of SQL has to to keep that memory stored by
that query, I dont want it.
Is there a way to release that memory I really dont need my SQL server to keep, without having to restart the SQL server?
and without topping the max memory the sql server uses, since I need my SQL server to use as much as it needs in other tasks(I dont think it needs to hold on to the above query memory used)
Thank You very much.

Is there a way to release that memory I really dont need my SQL server to keep, without having to restart the SQL server?
and without topping the max memory the sql server uses, since I need my SQL server to use as much
A query can be resource intensive even if it returns a single row. Generally it is a good idea to set SQL Server MAX memory.
BOL: "Optimizing Server Performance Using Memory Configuration Options
The memory manager component of Microsoft SQL Server eliminates the need for manual management of the memory available to SQL Server. When SQL Server starts, it dynamically determines how much memory to allocate based on how much memory the operating system
and other applications are currently using. As the load on the computer and SQL Server changes, so does the memory allocated. For more information, see Memory Architecture.
The following server configuration options can be used to configure memory usage and affect server performance:
•min server memory
•max server memory
•max worker threads
•index create memory
•min memory per query
The min server memory server configuration option can be used to ensure that SQL Server does not release memory below the configured minimum server memory once that threshold is reached. This configuration option can be set to a specific value based on the
size and activity of your SQL Server. If you choose to set this value, set it to some reasonable value to ensure that the operating system does not request too much memory from SQL Server, which can affect SQL Server performance.
The max server memory server configuration option can be used to specify the maximum amount of memory SQL Server can allocate when it starts and while it runs. This configuration option can be set to a specific value if you know there are multiple applications
running at the same time as SQL Server and you want to guarantee that these applications have sufficient memory to run. If these other applications, such as Web or e-mail servers, request memory only as needed, then do not set the max server memory server
configuration option, because SQL Server releases memory to them as needed. However, applications often use whatever memory is available when they start and do not request more if needed. If an application that behaves in this manner runs on the same computer
at the same time as SQL Server, set the max server memory server configuration option to a value that guarantees that the memory required by the application is not allocated by SQL Server."
LINK:
http://technet.microsoft.com/en-us/library/ms177455(v=sql.105).aspx
Memory configuration:
http://www.sqlusa.com/bestpractices/memory-configuration/
Kalman Toth Database & OLAP Architect
SQL Server 2014 Database Design
New Book / Kindle: Beginner Database Design & SQL Programming Using Microsoft SQL Server 2014

Installed 512mb RAM Memory and reads Empty!!!

Please help i just installed a 512mb Ram Memory chip into DIMM1 and it is reading under system profiler MEMORY as Empty and if you click DIAGNOSTICS under system profiler it says "Power On Self-Test: Last Run:2/2/07 7:52 AM
Result: Failed
Failure Type: Memory
Memory Slot: DIMM1/J31
Please help for it was not doing this yesterday with the 256mb chip inside it was reading it perfect. I went for an upgrade and lol now i lost RAM. Please Help!!!!

You might try taking the 512meg stick out and reseating it. Make sure it's all the way in.
lenn

T60 2007-63G 4.00GB RAM memory in windows 7 prof 64

Similar Messages

Maybe you are looking for