T60: Abort with Blue Screen (After Lenova Update)-- 79ETE0WW (2.20)

All
I need Urgent help. I run Lenova updates and it downloaded BIOS update 2.2 79ETE0WW. Plus other Driver Updates. After that I started gettin BLUE Screen Errors.
I have updated ATI Driver also.
STOP 0x0000007F (0x00000000, 0x00000000, 0x00000000, 0x00000000)
Any Hint how should start solving this.
I have XP SP 2
PG
Message Edited by i080927 on 02-15-2008 07:22 AM

007India,
You are wise to do research in advance of any major purchase.   Regardless of manufacturer , be it Lenovo, Acer, Dell, or HP, people tend to post their problems to the internet rather than their successes. How many people take time to post everyday saying "everything is going great!" ?
Yes, there has been a lot of discussion about blue screen issues. Some caused by turbo memory drivers, and if you check the forum there are updates and fixes for that. Some could be OS related, and some may relate to specific drivers.
Some of your broad assertions, like being forced to use only a single Dimm, are perhaps a bit over generalized. The issue you are referencing is related only to the T61P model, and there is no limitation to only using one memory module. Some customers have discussed lockups while gaming in 3D games with dual dimms, but service has been able to resolve these when noted. We are finalizing our investigation on this issue and resulting resolution. There are no similar issues with rest of the T series, or any X or R series systems.
The choice of whether to apply updates is certainly up to the individual.
Yes, there are stories posted about customer service, but I would suggest that you count them, and consider them against the hundreds of thousands of customers WW.   Again, people tend to post about the exceptions or the problems rather than saying everything is just fine. We do work to resolve issues when they arise.
Once again, I think you are wise to thoroughly evaluate products you are interested in, and the companies that produce them ahead of making your purchase.   I hope you are pleased with whichever system you purchase.
Best regards
ThinkPads: S30, T43, X60t, X1, W700ds, IdeaPad Y710, IdeaCentre: A300, IdeaPad K1
Mark Hopkins
Program Manager, Lenovo Social Media (Services)
twitter @lenovoforums
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество

Similar Messages

TS3274 My iPad mini retina is still having random reboots with blue screen after updating to iOS 8.0.2.i also did reset my iPad.But the problem still persis

My iPad mini retina is still having random reboots with blue screen after updating to iOS 8.0.2.i also did reset my iPad.But the problem still persists

Could you add your problem here: https://discussions.apple.com/thread/6569052? This makes sure the discussion and in one place and we can attract more attention from Apple.

Flashes from apple screen to blue screen after latest update.

After I updated last night my phone would never reboot. Goes from screen with apple on it for several minutes then flashes to a blue screen for a second then back to apple screen. I tried hooking up to computer but its like nothing is hooked up. Help!

Hi marston44,
It sounds as if you have experienced an issue with updating the operating system on your iPhone. Let's see if we can get you up and running.
I would suggest that you troubleshoot using the steps in this article -
If you can't update or restore your iPhone, iPad, or iPod touch
Thanks for using Apple Support Communities.
Best,
Brett L

Satellite L455D-S5976 - blue screen after BIOS update

fan wasnt operating properly causing overheat so updated bios,
see here
[http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=67086&tstart=0]
and now i am blue screening (it flashes extremely quickly) just as the windows xp screen on booting appears. keeps doing over and over, please help.
*edit,*
incidentally as the bios started updating the fan immediately picked up speed. strange.
Message was edited by: toshibauser_2

So you are not able to access BIOS???
Press F2 immediately (press it many times in the row) after notebook has been power on
But if you are not able to access the BIOS, I assume that there is a serious problem with BIOS/hardware possibly something went wrong during the updatebut usually this should not happen and its sounds strange
However, I think in such case just an ASP technician would help you.

Blue screen after bios update

Processor: i5-4570
Mainboard: Msi H87M-G43
Graphics Card: GIGABYTE Radeon R9 280X Overclock Edition
Memory: Kingston 8gb(2x4gb) 1600MHZ
Display: Dell S2340L
Storage: WD Blue 1TB
Casing: Corsair Carbide Air 540
PSU: Superflower Golden Green 600w
OS: Window 7 Home Premium OEM 64bit
Bios version: 1.0
I didnt set anything. I just click the update button for the verison 1.4 from live update 5. After the bios finish updating the system auto reboot then the blue screen appear.
I still can go in the bios.
The blue screen appear means the update has damaged my motherboard?

try a CMOS clear with power cord removed >>Clear CMOS Guide<<
once you have reset the CMOS make sure the boot order and drive modes are correct and retry for a boot!
<<<Do not use MSI Live Update to do BIOS flashes as it has a awful reputation for bricking BIOS chips>>>
if doing the CMOS clear doesn't get you back up and running then you may need to attempt a manual update using either M-Flash or by >>Use the MSI HQ Forum USB flasher<< and make a bootable USB stick with the BIOS files on it!

MBP flashing blue screen after software updates

This morning, my 2011 MBP 17" 2.2GHz i7 (running 10.6.8 with all updates) suddenly started flashing between whatever I was doing, and a light blue screen every few seconds. (The same light blue screen that you get briefly when switching users and starting up). If I restarted, after a random period of a few minutes, the problem would return.
Things kept going during the blue periods (ie keystrokes worked, downloads continued etc)
I tried repairing the disc and permissions. I kept getting certain incorrect permissions coming up, which were related to coreimage IIRC. They were reported as being fixed, but as soon as I ran it again, the same errors came up.
Tried numerous restarts and repairs to no avail. Zapped the PRAM. Ended up reinstalling OSX from the original install discs (10.6.6), and the problem went away. I then did the first software update that came up, which was the 10.6.8 combo and a few other bits and pieces. Used the machine for a few hours with no problems.
I then ran software update again, which was:
Thunderbolt update 1.0;
Safari update 5.1.2;
Security Update 2011-006;
Java 10.6 update 6
The problem reappeared almost immediately, so I'm putting it down to one of those four updates. I'm leaning towards Safari, because on each occasion I got the blinking blue screen, safari was open (although in the background at least once). I'm also pretty sure that I updated Safari (alone) the night before the problems started.
Anyone else having this issue?
EDIT: I should add that my MacPro isn't having this issue, and it has all the same updates installed except for Safari (still running 5.1.1).

I turned graphic card switching back on and ran the latest Safari off and on using youtube etc. with no problems. It used the HD 3000 card all the time for me. I have all the latest updates for 10.6.8 installed on my Early 2011 15" Macbook Pro. I've updated all my applications to eliminate the need for Rosetta. If the problem returns, do a safe mode startup (shift key and power key) and then a re-start to re-built your startup cache. You may have a startup item that's giving you a problem or one of your applications may be running in the back ground even after you quit it. Also, the permission errors never seem to go away no matter how often you run the repair permissions. This doesn't seem to mean anything. These "blue screen" problems probably have to do with with the Apple updates required to transition to Lion. Lion doesn't use Rosetta and you can't run power PC apllications. We had something that worked and Apple screwed it up.

Power up stops at blue screen after software update

I have a rather old Power Book G4, but was working fine until I tried a software update. It had 5 updates. It required a restart so I restarted it, and the update began. At 22% complete it stopped and said to restart. It wouldn't complete the upgrade. So I restarted it. It now stops at the blue screen. It gets past the gray screen with the Apple logo, but stops. Any ideas before I take it in? Thanks.

Some general advice on updating:
It is worth noting that it is an extreme rarity for updates to cause upsets to your system, as they have all been extensively beta-tested, but they may well reveal pre-existing ones, particularly those of which you may have been unaware. If you are actually aware of any glitches, make sure they are fixed before proceeding further.
So before you do anything else:
If you can, make a full backup first to an external hard disk. Ideally you should always have a bootable clone of your system that enables you to revert to the previous pre-update state.
Turn off sleep mode for both screen and hard disk.
Disconnect all peripherals except your keyboard and mouse.
1. Repair Permissions (in Disk Utility)
2. Verify the state of your hard disk using Disk Utility. If any faults are reported, restart from your install disk (holding down the C key), go to Disk Utility, and repair your startup disk. Restart again to get back to your startup disk.
At least you can now be reasonably certain that your system does not contain any obvious faults that might cause an update/upgrade to fail.
3. Download the correct version of the COMBO update from the Apple download site.
The Combo updater of Leopard 10.5.8 can be found here:
http://support.apple.com/downloads/MacOS_X_10_5_8_ComboUpdate
If you prefer to download updates via Software Update in the Apple menu (which would ensure that the correct version for your Mac was being downloaded), it is not recommended to allow SU to install major (or even minor) updates automatically. Set Software Update to just download the updater without immediately installing it. There is always the possibility that the combined download and install (which can be a lengthy process) might be interrupted by a power outage or your cat walking across the keyboard, and an interrupted install will almost certainly cause havoc. Once it is downloaded, you can install at a time that suits you. You should make a backup copy of the updater on a CD in case you ever need a reinstall.
Full details about the 10.5.8 update here: http://support.apple.com/kb/HT3606
More information on using Software Updater here:
http://support.apple.com/kb/TA24901?viewlocale=en_US
Using the Combo updater ensures that all system files changed since the original 10.5.0 are included, and any that may have been missed out or subsequently damaged will be repaired. The Delta updater, although a temptingly smaller download, only takes you from the previous version to the new one, i.e. for example from 10.5.7 to 10.5.8. Software Update will generally download the Delta updater only. The preferable Combo updater needs to be downloaded from Apple's download site.
Now proceed as follows:
4. Close all applications and turn off energy saving and screensaver.
5. Unplug all peripherals except your keyboard and mouse.
6. Install the update/upgrade. Do not under any circumstances interrupt this procedure. Do not do anything else on your computer while it is installing. Be patient.
7. When it ask for a restart to complete the installation, click restart. This can take longer than normal, there are probably thousands of files to overwrite and place in the correct location. Do nothing while this is going on.
8. Once your Mac is awake, repair permissions again, and you should be good to go!
If your Mac seems slightly sluggish or ‘different’, perform a second restart. It can’t hurt and is sometimes efficacious!
9. Open a few of your most used applications and check that all is OK. In this connection please remember that not all manufacturers of third party applications and plug-ins, add-ons, haxies etc, will have had time to do any necessary rewrites to their software to make them compliant with the latest version of your operating system. Give them a weeks or two while you regularly check their websites for updates. This applies particularly to plug-ins for Safari 4.
N.B. Do not attempt to install two different updates at the same time as each may have different routines and requirements. Follow the above recommendations for each update in turn.
Lastly, Apple's own article on the subject of Software Update may also be useful reading:
http://docs.info.apple.com/article.html?artnum=106695
If you are updating Safari (or just have):
Input Managers from third parties can do as much harm as good. They use a security loophole to reach right into your applications' code and change that code as the application starts up. If you have installed an OS update and Safari is crashing, the very first thing to do is clear out your InputManagers folders (both in your own Library and in the top-level /Library), log out and log back in, and try again.
So, disable all third party add-ons before updating Safari, as they may not have been updated yet for the new version. Add them back one by one. If something goes awry, remove it again and check on the software manufacturer's website for news of an update to match your version of Safari.
Most errors reported here after an update are due to an unrepaired or undetected inherent fault in the system, and/or a third party add-on.
Additional tips on software installation here:
http://docs.info.apple.com/article.html?artnum=106692
To reiterate, Input Managers reach right into an application and alter its code. This puts the behavior of the affected application outside the control and responsibility of its developers: a recipe for problems. That's not to say that issues absolutely will ensue as a result of Input Managers, but you, as a user, must decide. If the functionality of a specific Input Manager or set thereof is really important to you, you may well choose to assume the associated risk.
Again, the advice is to remove all Input Managers from the following directories:
• /Library/InputManagers
• ~/Library/InputManagers
especially prior to system updates (they can always be added back one-by-one later).

Mac Freezes on Blue Screen After Installing Updates! Help!

hi
Have just done the updates that were available for my wifes mac mini. All went well and it said restart to complete. I did this but when it restarted it would not get past the blue screen, the mouse cursor is there and moving but thats all.
Now my problm is i haven't got a clue about mac's, the wife is away and don't want to tell her that i've managed to trash her Mac as she has got quite a bit on there. If it was windows it would be fine as am happy with that but it isn't and i am stuck!!!!!(read dead if i can't sort it out before she gets back!!)
Now what i want to know is how can i basically get it back to where it was before installing the updtaes or can i get back to a state of working without deleting anything progs installed etc? With windows you can use there system restore after booting in safe mode. Is there a way i can do it with the mac or something along those lines.
i know this is probably a pain post but i am stuck
Cheers in advance for any help
Mac Mini 1.66GHZ INTEL Dual Core Mac OS X (10.0.x)

The only way to get back to a state before the updates is if a backup was made.
As for booting in safe mode, you can try holding the shift key.
If that works, it says that some attached peripheral needs an updated driver. Remove all third party peripherals, and see if it boots.
If It doesn't boot, it is likely the directory is damaged, or the hard drive is very full, or the hard drive might be dying. You can also try zapping the PRAM:
http://docs.info.apple.com/article.html?artnum=2238
Unfortunately there is no way to tell the difference between the above possibilities, and if you use a directory repair utility on a dying hard drive, it may speed its death. How valuable is her data to her, and is it backed up anywhere?

Blue Screen after Security Update

Hello,
I just got my first Mac, a Macbook, and was having no problems until I installed the most recent security update (along with updates to Quicktime, Safari, iTunes, etc.). The next time I turned the computer on I got the blue screen of death. Since I'm new to Macs, I'm not familiar with PC tricks like "Control-Alt-Delete," so I just held the power button until it turned off. Now when I turn it back on it seems slow to boot, though it appears to be working OK otherwise.
I've done some research here and on other sites, and I gather that the blue screen was a problem for some people upgrading to Leopard, as a result of something called the Application Enhancer. But I haven't seen anything about people whose computers already had Leopard and then installed the security update. Is my problem also due to the Application Enhancer? Will it be solved if I remove the Enhancer somehow? Would I be best served by reinstalling the OS and starting from scratch?
Thanks for helping out a new Mac user. I would appreciate any responses.

polarbear79 wrote:
I don't know if you can boot with an "install disk" using the D key, or if that would even be any help at all...
*Hi polarbear, Welcome* to Apple's Users Help Users Forums.
Using the d key will run the AHT = Apple Hardware Test. Boot w the c key.
Good Luck, JP

Can't see desktop with blue screen after login

Hi
we have a server 2008 ent SP2 that sometimes when use remote desktop or via vmware console to access this server, after login we got blue screen and can't see desktop. after force reboot it recovery.
From application log, we find some error:
Description (Event ID: 1000):
Faulting application Explorer.EXE, version 6.0.6002.18005, time stamp 0x49e01da5, faulting module msshsq.dll, version 7.0.6002.18255, time stamp 0x4be071d5, exception code 0xc0000005, fault offset
0x000063fd, process id 0x1300, application start time 0x01cf9a43236d46dd.
Description(Event ID: 9009):
The Desktop Window Manager has exited with code (0x40010004)
Description(Event ID: 1530):
Windows detected your registry file is still in use by other applications or services. The file will be unloaded now. The applications or services that hold your registry file may not function properly afterwards.
DETAIL -
1 user registry handles leaked from \Registry\User\S-1-5-21-249263827-1212357926-315576832-391740:
Process 3812 (\Device\HarddiskVolume1\Windows\System32\winlogon.exe) has opened key \REGISTRY\USER\S-1-5-21-249263827-1212357926-315576832-391740

Hi,
In general, event ID 1530 means there are some data in the user profile are still be accessed when the user log
off from the Terminal Server. Please check if any of the data is still remained in the user profile supposed to be deleted. You can use Process Monitor or Process Explorer in order to find the software which is using the data and find the solution. If there
is no such data remained, the Windows have possibly stopped the process and deleted the data when log off. In such a case, you can ignore the Event 1530.
In addition, I recommend running SFC /Scannow from an elevated command prompt and check a dump file for Windows
Explorer under C:\Localdumps.
Besides, you can also download
Autoruns to troubleshooting Explorer issues. Please run Autoruns as Administrator, go to Options menu, Filter, select Hide Microsoft Entries and Ok. After that, open the Explorer tab,
and you will see all DLL that are running inside File Explorer, so start disabling and testing if Explorer crashed.
Furthermore, the KB below may be helpful:
http://support.microsoft.com/kb/961038/en-us
Best regards,
Susie

Getting Blue Screen after OS Update.

Dear All...
Iam Having 10.5.1 MAc X. I started a OS update to 10.5.8 and it provided me as a file. I started installing the File. After installing the File, it prompted me to make a restart. On restart, iam getting a Blue screen and the process is running... and no login screen is appearing..
Not sure is that installing in the background or any other problem.
Please assist.

http://discussions.apple.com/ann.jspa?annID=495

Ipad air rebbot with blue screen after ios8 installed

After I have installed ios8 on my iPad Air 64 GB Wi-Fi I get the problem the device reboot suddenly after get a blue screen. The problem happens with any application I am using. How could fix it?

Hi, HPucci.
Thank you for visiting Apple Support Communities.
Here are some troubleshooting steps that I would recommend going through when experiencing this issue.
iOS: Not responding or does not turn on
http://support.apple.com/kb/ts3281
Cheers,
Jason H.

Mac OSX 10.6.7 boot very slow with blue screen after clean reinstall ...

... with the following log:
6/12/11 6:10:18 PM          com.apple.launchd[1]          *** launchd[1] has started up. ***
6/12/11 6:12:07 PM          com.apple.launchd[1]          (com.apple.xprotectupdater[14]) Exited with exit code: 255
6/12/11 6:14:00 PM          com.apple.launchd.peruser.501[105]          (com.apple.ReportCrash) Falling back to default Mach exception handler. Could not find: com.apple.ReportCrash.Self
6/12/11 6:14:26 PM          com.apple.launchd.peruser.501[105]          (com.apple.Kerberos.renew.plist[122]) Exited with exit code: 1
6/12/11 6:14:38 PM          com.apple.WindowServer[88]          Sun Jun 12 18:14:38 idas-MacBook-Pro.local WindowServer[88] <Error>: kCGErrorFailure: Set a breakpoint @ CGErrorBreakpoint() to catch errors as they are logged.
Can anyone help to solve this problem?

If you see a blue screen at startup
http://docs.info.apple.com/article.html?path=Mac/10.6/en/8963.html

I now get the blue screen after apple update

Hi,
After spending the last 2 hours searching im still no better off!
OK so today my system update thing pops up and says i should download and install itunes 7.1.1 and and apple update which i belive was 10.4.9 but i could be mistaken on that.
Anyway after install all i get is the blue loading screen with the apple logo and the spinning bar. Ive tried holding c to boot from tiger install disk...nothing happens. Ive tried holding shift key for safe mode...nothing happens!
Im really getting p'eed off now. When apple give me an update i would expect to improve things not ruin them!
Anyway if anyone has any ideas please please let me know.
Thanks
Wayne

Hi, we all understand the frustrations..OK, 1st I would TURN OFF your mac.
Then unlug ALL peripherals except K/B & M. Then I would Restart. If it restarts OK I would Repair Permissions & reboot again. Then if ALL was well I would d/load OnyX (free) and do a FULL maintenance etc...After that I would go for doing the updates One at a Time & Repairing Permission before & after rebooting...L

Ipod Touch 4g turned to blue screen after IOS6 Update?

So my ipod said I could update to IOS6, but I had to plug it in first. I did and updated then set it out of the way to be on my laptop. When I checked on it all it showed was a bright blue, almost turqoise screen and won't respond to any buttons I press. It won't show up on my itunes anymore. I've tried plugging it in and then replugging it, but that hasn't changed anything. I don't know what else to do. I have a 8gb 4th generation ipod touch if that helps.

Not uncommon problem. Try:
- iOS: Not responding or does not turn on
- If not successful and you can't fully turn the iPod fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.

T60: Abort with Blue Screen (After Lenova Update)-- 79ETE0WW (2.20)

Similar Messages

Maybe you are looking for