T60 Fn key not working right

T60/XPPRO... does not go directly to sleep mode with Fn-F4 combination. Calls up Standby/Restart/turn off window instead. I think it used to work right.

I too had the misfortune of losing my Function key capabilites after having done a series of updates (which may or may not have included BIOS updates).
I was beginning to think that it was indeed a hardware problem - that the key itself was kaput.
I tried to upgrade, downgrade or reapply the latest BIOS, or an earlier BIOS, but the Windows BIOS update would end in error, and the CD-ROM (ISO) BIOS updater would not allow me to downgrade (nor would it allow an update without a working battery).
I read somewhere that perhaps I could revert back to the shipped BIOS if I pull the CMOS battery and leave the unit dead for a few hours. I had nothing to lose.
Much to my surprise, this approach worked! After reattaching the CMOS battery, putting the HW back together and powering up, the unit took an extended amount of time to get past POST, but it did eventually boot Windows, and I got use of my Function key back, including brightness control, reading lamp, sleep and trackpad control!
My best guess is that the battery detach-reattach reset some deep-seated settings in the embedded controller interface of/and/or the BIOS, bringing life back to the code allowing the Function key to work.
YMMV. But I am happy.

Similar Messages

Command key not working right in several applications

All of a sudden, some functions are not working right, i.e., in PhotoShop when I select the Zoom key I get a minus rather than the usual plus. In Date and Time, I started getting a 24 hour clock. If I go there in System Prefs and change to 24 hour clock, then the readout on my menu bar is for 12 hour clock. Sometimes when I use Command-Q the machine asks me if I want to close all programs rather than just the one I'm attempting to leave. What is wrong?

Hi n,
I have no idea if this might work, but I'd reset the PRAM and SMC.

Right arrow & ALT key not working right after clean install of XP Pro

My 3000 N100 stopped booting so I had to reinstall. Had a full license for XP Pro that I wasn't using yet, so decided to do a clean install.
Am still working on getting various things working (e.g., audio), but at the moment the biggest irritations are the following:
1) My right arrow is disabled completely.
2) The ALT+TAB combo doesn't work properly. When I do it in Firefox, for example, it does some sort of scrolling down-screen.
Anyway, to isolate the problem, I tried plugging in a USB keyboard. With that keyboard, everything appeared to work fine.
Now, before you tell me that it's just something under the keyboard (which was replaced shortly before the crash, so I doubt that's the problem) keep in mind that the ALT+TAB *does* do something (and not the simply TAB alone), which leads me to suspect the problem lies in how the ALT key and the right arrow key are mapped.
Any ideas?
Could this be related to a driver that I still need to install? (My device mgr still has a bunch of things with question marks.)
Thank in advance.

exscentric wrote:
Did you look in the list of campatibility problems windows 8 generated to see if the touchscreen is included.
You did not say whether it came with win 8 and it whether it worked before.
I have a b320 and the touch is not compatible with win 8 and it works for general stuff but won't bring the charm list in from the side nor work in the left corners, nor some of the swipe features.
No drivers for the b320 yet. Windows set it up with something that kind of functions.
It did come with Windows 8 installed. It also came with CD containing Win8 Driver Pack v1.0. I installed all of the drivers from this CD.
Where would I find this list of compatibility problems that you refer to?
Thanks!

Keys not working right

I put my powerbook to sleep and after i turn it back on the Caps Lock and the Num Lock were turned on.
However, they work in reverse.
I have have to have Caps lock on in order to type in small letters and when it is off it types caps.
When Num Lock is off it types only the numbers.
so basically, my Cap key and Num lock keys are working in reverse, and not the way they should be working normally. Is there a way to fix this?
Thanks

Have you shut down your computer lately? Maybe restarting it will help.

Wired keyboard-number pad&right arrow keys not working-serial # help!

Hello to whomever reads/replies -
I have a wired keyboard for my iMac(it's not the aluminum imac, but the version before it with the keyboard and mouse that came with it). I got this keyboard June 2007 after the original keyboard sent to me had problems with it with some keys not working properly. And now about a week ago my right arrow key and the zero, decimal point, one, two, three and enter button on the keypad stopped working out of the blue. One night they worked and the next they didn't with nothing being done different, nor was the keyboard stored differently.
I've cleaned the keyboard inside and out twice and tried pushing the little squishy thing under the keys when you pop them off and there's no response with those being pushed either so something's got to be wrong with the keyboard itself.
Also, when I go online to look up the warrenty on this keyboard, #1 i can't find where it tells me where the serial number on the **** WIRED keyboard is, just gives me where i can find it on the WIRELESS keyboards. Ugh. So I looked under my keyboard and punched in the numbers and letters that i found on a little silver plate just below where the wire and USB ports are in the top of the keyboard and I get an 'invalid serial number' error message.
So.. could anyone help me with these problems? I'd really rather not call tech support since it took me over two hours to explain to the man that I spoke with last year about my other keyboard and I just don't have the time! Thanks in advance!
Sharon

Hello sharon:
Welcome to Apple discussions.
Run, don't walk to the phone. Call Applecare and indicate you have a warranty problem. The KB is (or will be shortly) out of warranty. It may take you some time, but it may save you some money in the long run.
Incidentally, it appears to me that your KB is, indeed, broken.
Barry

T42 keyboard not working right, HELP PLEASE

My keyboard is not working right. If I push the key it wont work,but if I hold the key for a couple seconds then it works was told to replace the keyboard and I did with a new one. But it is still doing it. Can anyone tell me what the problem is. Model # R4U machine type 2378, OS XP-PRO , COA SP2 , S/N L3xxxxx.
Message Edited by scottzilla on 12-15-2008 10:05 PM
Moderator Note; s/n edited for members own protection
Message Edited by andyP on 12-16-2008 07:57 AM

It's the Quick Selection Tool in Photoshop Elements 9 and I'm trying to get the background and make it another layer so I can even out the color of the background then bring down the transparency. Not sure if that makes sense. I'm new to this.... Sometimes the area it will grab can go ...not fast.. but not slow. Sometimes it's like it's just messed up and literally takes 30 seconds to process each move. I rebooted my computer and re opened it and it helped a little. It's not clear what causes it when it messes up and when it doesn't. Just frustrating. It's probably user error because I'm so new at Photoshop. Thanks for your input. I really appreciate it.

Some keybaord keys not working after suspect virus on Tecra A

Apostrophe, delete, semicolon and end keys not working after a suspected virus attack. I found record of the same problem on the net but apparently this guy fixed his problem after he found scroll lock or num lock on.
This is not the case here but there is something going on with numlock - register shows 2 and not 0. change to 0 but when reboot back to 2 again.
Suspect changed back by bios. I thought i couldnt get to bios because DEL key not working but found ESC works.
Tried to reset default values for bios but then cannot save and exit as this required the END key to work.
I was running XP at the time of the (suspected) attack and could not rectify the problem so put the computer back to the OEM status which i hoped would help - it did not, same problem so rather than install all the software on the computer again with XP i upgraded to Windows7 - fresh install.
Still keys do not work - it was a real pain to start with as my computer was set up to ctl+alt+del to log in and i had to do this with on screen keyboard - XP - this also showed that numlock was on before and after windows boot.
The reason i suspect a virus - my wife was watching one of her tv shows on line from home country (another toshiba laptop) and i needed to use that laptop for something else so i asked her to use mine - later on we turned the laptops off and in the morning turned tham back on again, the other laptop with AVG virus protection flagged several hits and this one with (FAMOUS and completely up to date) Norton flagged nothing - once i got into it using on screen keyboard.
Problems with this computer was found after scanning with a different antivirus.
Anyway - i am left with 4 keys that do not work on my keyboard (actually they did work after i logged into the computer for the first time but i had to hold them in for a long time - and then next time i rebooted, not work at all and havent ever since)
Any assistance here would be greatly appreciated, i have been working on this all weekend with no joy at all.
Thanks in advance.

Thanks Xardas,
I have essentially done both - tried Toshiba OEM status found on a small partition of the toshi hard drive - no good - then did a fresh install of Windows 7 - still no good
You know - as cunning as it sounds - i cannot reload the default settings in BIOS as it requires the END key to work so i can Save & Exit - all i can do is Exit Without Save - i sort of feel snookered at the moment.
Toshiba got back to me today and said that i have tried everything they would have (yeah for sure) and to take my machine into a service centre for a hardware check - yeah right on boys!
Check out this guys post below found on Kioskea.net - getting close to a year ago...
ms ml - Nov 10, 2009 12:52am GMT
Hi there, I was hoping that you might be able to help me with the problem that I seem to be having with my Toshiba Satellite Laptop Keyboard too. For a few days now I havent been able to use a few of the keys on my keyboard, including (1) delete (the backspace key is still working though), (2) colon/semicolon, (3) apostrophe/quotation marks and (4) end (the home and PgUp and PgDn keys are still working though). Any suggestions?
Identical to my problem....obviously this guy had the same problem as well...see below - same thread.
yab - Feb 9, 2010 4:47am GMT
hi did you ever figure this out? i have the same exact problem...
However, i was not able to solve my problem the way this guy did - my scroll lock is not activated - it seems to work ok (on and off) i tested it using Excel to move around the cells.
yab ms ml - Feb 9, 2010 7:57am GMT
Nevermind. For me it was scroll lock. My apostrophe, semicolon, and delete keys are alive and working again. I hope you have the same easy fix.
Incidently - never hear from the first guy again - probably ended up being his scroll lock.
all sugestions welcome - sorry my smily face has no eyes -) guess why!

Command, option, ctrl, fn keys not working

thanks to a visiting dog who got tangled up the power adapter my laptop ended up on the floor, wide open with the keyboard popped out. I have inspected the connector cable and it looks OK to the naked eye. I disconnected the keyboard cable and re-connected.
When using an external USB keyboard all keys function normally. When using the built-in keyboard the only keys not working are the command, option, ctrl and fn keys. I have restored modifier keys to default (I had never changed them) but this did not help. I also toggled the "use F1-F12 to control..." option in the keyboard preferences to no avail and have restored keyboard shortcuts to no avail.
Is my keyboard shot? Is the a pref file I might delete?

Hi, Mel. If the external keyboard works properly, I'm afraid you have to figure your built-in KB has been dogged to death. I hope the pet owner will do the right thing by you. I also hope the KB is all that was damaged. How are your adapter cord, plug, and DC-In port? Does your battery still charge OK?
Whenever anything visits my house that's active, inattentive, and built low to the ground, my Powerbook runs on battery power only. I haven't seen one yet, but the new magnetically-connected, easily- and harmlessly-detached MacBook Pro AC adapters sound like a superb idea to me. Too bad our PBs can't use 'em.

Keyboard: some keys not working

Some keys not working. Need help/suggestions. Not great with computers so PLEASE give details/steps re: how to do what you suggest - thanks!
Details: intel based iMac running snow leopard 10.6.8. Apple wireless/bluetooth keyboard (came with the iMac).
Some keys suddenly stopped working: space, tab, capLock, option key to the right of space bar (one on the left works), down arrow
The problem happens in various programs (safari, pages, etc)
The keyboard is fine on another iMac
A different keyboard is fine on this/the involved iMac
(nutshell: keyboard works fine - computer works fine, unless they're together)
Here's what's been tried/checked:
-checked the settings for universal access ("mouse keys" are off) and checked for any bluetooth keyboard shortcuts.
-in system preferences "speech" is not set for "speak selected text when the key is pressed" - this is not checked/selected
-tried creating a new user but had the same issue so it's computer-wide rather than just a user account
-removed the keyboard and reconnected (using the +/- signs and "disconnect" and putting in a new code of numbers to pair keyboard)
-language/text is set for english
-did the keyboard viewer and the keys in question did NOT highlight when pressed (but don't forget the entire keyboard is fine on a different computer so thekeys aren't the issue)
-"slow keys" is turned off re: keyboard in system preferences.
Any help is welcomed. It's frustrating knowing the keyboard works, just not with this computer. Please help. Many thanks!

yes - not sure how this works...if you can see my original post there are a lot of details in there. If you can't...
nutshell: the keyboard works on a different iMac
             a different keyboard works on this/the involved iMac
             I tried to create a different user and the keyboard still does not work so it is computer-wide
             I also removed the keyboard from the computer (using the +/- symbols and disconnecting and then repairing it. The problem remained
Thanks for any help. It's crazy that the keyboard is fine and the computer is fine but together, there's the problem.
Thank you!!!

Sound key not working

volume key not working ofter last update

Hello Amandodsouza,
It sounds like you are experiencing some unexpected behaviour with the on screen keyboard after updating to iOS 7.1.1. I would start by closing all the running apps on the phone:
iOS: Force an app to close
http://support.apple.com/kb/ht5137
Double-click the Home button.
Swipe left or right until you have located the app you wish to close.
Swipe the app up to close it.
When you have done that and restart the phone and test the issue again:
iOS: Turning off and on (restarting) and resetting
http://support.apple.com/kb/ht1430
Thank you for using Apple Support Communities.
All the best,
Sterling

E545 and Function key not working

Any help here is apprecited. My function (Fn) key is refusing to work at all. None of the special features are able to be used. I've checked all my drivers, and followed the instructions in the User Guide, but some of the options described in the guide are even showing on my computer.
I'd love for some help on this issue, as the computer is pretty worthless right now.

Hi Jamesbjenkins,
Welcome to Lenovo Community!
As per the query we understood that you are facing issue with keyboard function keys not working on your ThinkPad E545.
Is the system updated with all the latest drivers and application? To confirm with I request you to run ThinkVantage system update tool. This will search for all the required drivers and application for your system and will update.
Hope this helps.
Best regards,
Hemanth Kumar
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Return & shift keys not working

My keyboard is unresponsive. problms started w/ "L" and "9" and "Enter/Return" keys. Did a s/w update and reboot but still no success. Now only "Shift" and "Enter/Return" keys are unresponsive.

I tried the troubleshooting steps listed in the article linked above but ran into the following problems:
a) the View menu doesn't have a "Speech" item listed (I'm running 10.9.2)
b) My MacBook Air doesn't have a disk drive; impossible to start up from an Install disk as recommended in step 10.
None of the other steps helped (sticky keys off, slow keys off, mouse keys off, etc)
Looking at the forums, looks like several other people have the issue of just the right-side shift and return keys not working, like me. Could we please have some advice that is specific to that particular issue?
In the meantime I'm using only the left-side shift and have downloaded and installed KeyRemap4MacBook and remapped my backslash key so it issues the "return" command. A clunky work around but it seems to do the trick, at least.

Safari 5.1.2 Not working right after install

Hi, after installing the update for Snow Leopard safari is not working right. Some pages don't load, and other don't load correctly.
I have to keep hitting refresh two or three times. Also thunbnails are not displaying. Even the apple page comes up looking buggy.
Please help!

Please read this whole message before doing anything.
This procedure is a diagnostic test. It won’t solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of this exercise is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login. First, disconnect all wired peripherals except keyboard, mouse, monitor, and Ethernet, if applicable. Boot in safe mode and log in as yourself. The instructions provided by Apple are as follows:
Be sure your Mac is shut down.
Press the power button.
Immediately after you hear the startup tone, hold the Shift key. The Shift key should be held as soon as possible after the startup tone, but not before the tone.
Release the Shift key when you see the gray Apple icon and the progress indicator (looks like a spinning gear).
During startup, you will see "Safe Boot" on the login screen, which appears even if you normally log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Safe mode is slower than normal, and some things won’t work at all, perhaps including wireless networking on certain Macs. If you usually connect to the Internet via WiFi, and it doesn’t work in safe mode, connect using an Ethernet cable. If you can’t do that, reboot as usual (i.e., not in safe mode) and perform a safe login, as follows: Enter your credentials at the login screen, then hold down the shift key and click the “Log in” button. Keep holding the key until the menu bar appears. In this mode, your login items, among other things, won’t load.
In safe mode, test again. Same problem(s) now?
After testing, reboot (if you booted in safe mode) or log out/log in (if you performed a safe login) as usual.

X240 F8 Wifi function (fn) key not working

Hi guys,
Just wondering if you guys have the same problem with the F8 wifi switch function key not working?
The F8 function key only works if I have the "Network" page opened on the right hand side (by clicking on the network logo on the task bar). It doesn't do anything if I just press it without that network page out.
Is it suppose to do that?

Hi Tomlaulau,
Welcome to Lenovo Community!
I’m sorry to hear that you are facing the issue with Wifi on ThinkPad X240.
This kind of issue occurs when there is error in the Power Management application. Hence we request you to check with updating the Power Management application from the drivers page.
If your system is installed with Windows 7 OS, then you have to install both Power Management and Power Manager Application.
Below is the link to enter the downloads page and install exact Power Management application accordingly, please click on "Select Product" then in "QUICK PATH" enter the MTM no. select the exact model.
http://support.lenovo.com/en_US/downloads/default.page#
Hope this helps. Do post back if issue persists!
Best regards,
Hemanth Kumar
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Windows key inoperative dv7-4285 windows 7 - 64 bit. only key not working

Windows key inoperative dv7-4285 Windows 7 - 64 bit. The Windows key is the only key not working.

Thanks for the information,
I have a couple of suggestions that may help with this issue. My first suggestion would be to uninstall and reinstall the drivers for the keyboard.
Follow these steps to do that:
Click the "Start Menu"
Type "Device" in the search box under all programs
Select "Device Manager"
Click "Keyboards"
Remove all devices under keyboards by right clicking and selecting" uninstall" on each device
Restart the computer
How long has the button not been working?
Are there any other keys not working or producing the wrong character?
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

T60 Fn key not working right

Similar Messages

Maybe you are looking for