T60 freezes when moving trackpoint right after boot

Hello,
I have been experiencing this issue for quite a long time. Initially I thought it was due to an update for Windows XP, but I couldn't find any message on the logs when the laptop hangs. I re-installed XP several times to discard any software-related incompatibility, but even with a fresh install it was happening.
I recently realized after several tests that the problem occurred more frequently when moving the mouse (trackpoint or touchpad) right after system boot (either cold boot or boot from hibernation). What I found out is that it will no longer happen if I suspend the laptop after the system has started, not touching the mouse.
The symptoms are that Windows freezes. No HD activity at all, system doesn't respond to any mouse/keyboard input. If I close the laptop cover the system doesn't hibernate. The only way to resume normal operation is pressing the power off button for a few seconds, so the system turns off, then turn on normally.
All drivers are up to date.
Has anyone experience this issue?
Thanks
Solved!
Go to Solution.

Try to remove your battery... If battery is dead it might give you this problem...

Similar Messages

T60 Freeze when moved.

Hello.
I have problem with my laptop.
When i move my t60 laptop it freeze and nothing happend while i make hard reboot.
Thу OS is Win XP.
The situation happen from time to time. It is not happen when i boot it and shake it. But if i didn't swich it too sleep mode ang go somwhere it stop working. The display freeze. No mouse no keyboard. After reboot it start work again.
Thank You.

Hello wjli2. Thank you for the answer. But this solution didn't help me. My Active protection system was set to lower level of sensetivity.
BR Evgeny.

Camera app freezes when moving iPhone 4s after upgrading to iOS 8

Hi,
After upgrading my 4s to iOS 8.0.2 (I updated directly to 8.0.2 from iOS 7), after launching the camera app and moving the phone the camera freezes for a few seconds and then it works again.
I have restarted the phone and I don't know what else to do.
My camera was working fine when i was still on iOS 7.
Anybody else facing similar problems, if so, have you found a solution yet. thanks

I have the EXACT same issue on my wife's 64GB iphone 4S. I took it to the Apple Store in Roosevelt Field, NY and the genius said there is nothing they can do. They said it was my fault for downloading iOS 8 and that the software brought to life a hardware problem that is not covered under warranty. He said that I was not required to upgrade to iOS8 and wanted me to pay $199 for a replacement.
So Apple wants me to pay to resolve an issue THEY caused. I hate Apple now. The iphone 4S worked perfectly under iOS 7.
Thanks Apple for the worst customer service experience ever. You've proven that when you have a product that everyone wants you can afford to treat your customers like ****.

Follow up on: Topic : iBook G4 800 MHz freezes when moved or bumped lightly

Last year I posted the following message, which has been fixed. Summary of repair at bottom of post:
Original message posted Aug 4, 2007:
"For the past several months my iBook G4 has been freezing when moved or bumped lightly. It has also occasionally done some strange things at startup. It sometimes will show just a grey screen and sit there. Sometimes the screen will do some sort of fade transition across the screen, going bright in a wave accros the screen and then to black and then nothing. Sometimes there will be vertical lines in the middle of the right side of the screen of various colors. And the last significant occurance is the occassional static in the display. These video symptoms always occur at startup. If the computer starts up to the desktop it will only freeze if moved or bumped lightly. The cursor sometimes can still be moved after the computer freezes.
I have done the following:
Clean install of OS (Tiger 10.4) with all updates and tested before updating. If have done this before and after wiping the drive clean.
I have removed the extra RAM, reseated the RAM, removed the Airport Extreme card, reseated the Airport Extreme card. I have chaged out the hard drive. I have also disassembled most of the computer to check for any other loose components. The only discrepency I have found was a crimped microphone wire, that is slightly damaged. The screen was replaced a few months after purchase when it had a close encounter with a hot wheel car of my son's. The computer is currently a little over three and a half years old.
I work on computers for a living, specialize in Macs, and have been using Macs since 1986. I am stumped. Can someone please shed some light on this issue by providing a different point of view than my own. Sometimes we need an outside perspective to solve some problems.
Thanks in advance for any help you can provide."
Solution provided by Apple:
I took the laptop to the Apple Store and sent it in for the flat rate repair, which was a little over $300. They had to replace the motherboard and some of the cable. The bad motherboard was causing video issues, freezing and startup difficulties. The bad cables were causing the freezing when the unit was moved. The laptop has performed exceptionally well since the repair and is still in use. Hope this helps other people out there.

As a guess it suggests to me that the leads on U28 need to be reflowed.
Mad Dog

Can't connect to the internet right after boot up

Hey guys, I have an interesting problem in which if I try to use internet right after boot up (via scripts) I can't resolve host names. However, if I try to use the internet right after boot up manually I can resolve host names. I had this problem with a script but I've since rewrote it to work around the problem; however I now seem to have this problem with openVPN and I need this to work. I'll use openVPN as my primary example but the situation was the same for my script.
Basically, openVPN starts up via systemd and it can't resolve my server's host name. Even 18 hours later. I have 'resolv-retry infinite' in my conf file which as I understand says 'if you can't resolve the host name keep trying to resolve it indefinitely'. I left my computer on overnight and openVPN still could not connect to my server, despite me being able to ping it, have MySQL get data dumps and replicate from it and other software being able to resolve the server's host name. If I restart openVPN, then it works! I rebooted the computer and let it try for a few minutes to connect and it couldn't. I restarted openVPN manually and it resolved the server's host name, 5 minutes after the computer booted up even though it couldn't connect on it's own the previous night.
Here's openVPN's status as of this post:
[email protected] - OpenVPN connection to client
Loaded: loaded (/usr/lib/systemd/system/[email protected]; enabled)
Active: active (running) since Thu 2013-05-02 14:10:02 MDT; 58min ago
Process: 248 ExecStart=/usr/sbin/openvpn --cd /etc/openvpn --config /etc/openvpn/%i.conf --daemon openvpn@%i (code=exited, status=0/SUCCESS)
Main PID: 254 (openvpn)
CGroup: name=systemd:/system/[email protected]/client
ââ254 /usr/sbin/openvpn --cd /etc/openvpn --config /etc/openvpn/client.conf --daemon openvpn@client
May 02 15:07:52 CCH001 openvpn@client[254]: RESOLVE: Cannot resolve host address: my.server.com: Name or service not known
May 02 15:07:57 CCH001 openvpn@client[254]: RESOLVE: Cannot resolve host address: my.server.com: Name or service not known
May 02 15:08:02 CCH001 openvpn@client[254]: RESOLVE: Cannot resolve host address: my.server.com: Name or service not known
May 02 15:08:07 CCH001 openvpn@client[254]: RESOLVE: Cannot resolve host address: my.server.com: Name or service not known
May 02 15:08:12 CCH001 openvpn@client[254]: RESOLVE: Cannot resolve host address: my.server.com: Name or service not known
May 02 15:08:17 CCH001 openvpn@client[254]: RESOLVE: Cannot resolve host address: my.server.com: Name or service not known
May 02 15:08:22 CCH001 openvpn@client[254]: RESOLVE: Cannot resolve host address: my.server.com: Name or service not known
May 02 15:08:27 CCH001 openvpn@client[254]: RESOLVE: Cannot resolve host address: my.server.com: Name or service not known
May 02 15:08:32 CCH001 openvpn@client[254]: RESOLVE: Cannot resolve host address: my.server.com: Name or service not known
May 02 15:08:37 CCH001 openvpn@client[254]: RESOLVE: Cannot resolve host address: my.server.com: Name or service not known
Here is my conf file:
# Sample client-side OpenVPN 2.0 config file #
# for connecting to multi-client server. #
# This configuration can be used by multiple #
# clients, however each client should have #
# its own cert and key files. #
# On Windows, you might want to rename this #
# file so it has a .ovpn extension #
# Specify that we are a client and that we
# will be pulling certain config file directives
# from the server.
client
# Use the same setting as you are using on
# the server.
# On most systems, the VPN will not function
# unless you partially or fully disable
# the firewall for the TUN/TAP interface.
;dev tap
dev tun
# Windows needs the TAP-Win32 adapter name
# from the Network Connections panel
# if you have more than one. On XP SP2,
# you may need to disable the firewall
# for the TAP adapter.
;dev-node MyTap
# Are we connecting to a TCP or
# UDP server? Use the same setting as
# on the server.
;proto tcp
proto udp
# The hostname/IP and port of the server.
# You can have multiple remote entries
# to load balance between the servers.
remote my.server.com 1194
;remote my-server-2 1194
# Choose a random host from the remote
# list for load-balancing. Otherwise
# try hosts in the order specified.
;remote-random
# Keep trying indefinitely to resolve the
# host name of the OpenVPN server. Very useful
# on machines which are not permanently connected
# to the internet such as laptops.
resolv-retry infinite
# Most clients don't need to bind to
# a specific local port number.
nobind
# Downgrade privileges after initialization (non-Windows only)
user nobody
group nobody
# Try to preserve some state across restarts.
persist-key
persist-tun
# If you are connecting through an
# HTTP proxy to reach the actual OpenVPN
# server, put the proxy server/IP and
# port number here. See the man page
# if your proxy server requires
# authentication.
;http-proxy-retry # retry on connection failures
;http-proxy [proxy server] [proxy port #]
# Wireless networks often produce a lot
# of duplicate packets. Set this flag
# to silence duplicate packet warnings.
;mute-replay-warnings
# SSL/TLS parms.
# See the server config file for more
# description. It's best to use
# a separate .crt/.key file pair
# for each client. A single ca
# file can be used for all clients.
ca ca.crt
cert host.crt
key host.key
# Verify server certificate by checking
# that the certicate has the nsCertType
# field set to "server". This is an
# important precaution to protect against
# a potential attack discussed here:
# http://openvpn.net/howto.html#mitm
# To use this feature, you will need to generate
# your server certificates with the nsCertType
# field set to "server". The build-key-server
# script in the easy-rsa folder will do this.
ns-cert-type server
# If a tls-auth key is used on the server
# then every client must also have the key.
tls-auth ta.key 1
# Select a cryptographic cipher.
# If the cipher option is used on the server
# then you must also specify it here.
;cipher x
# Enable compression on the VPN link.
# Don't enable this unless it is also
# enabled in the server config file.
comp-lzo
# Set log file verbosity.
verb 3
# Silence repeating messages
;mute 20
Anyone have any idea what could be going on? It seems to me that when a program starts up it takes a snap shot of the current network status and it then uses it, even if it's 10 minutes later and the network has been fully loaded/configured, the program uses that snap shot and can't connect to the DNS.
Last edited by anEveryDayGuy (2013-05-02 21:20:47)

'Requires=network.target' wasn't in it so I added it but nothing's changed. I've left it in because openVPN does require network.
As I said, I had this problem with a script so I don't think it's anything specific to openVPN. I had a weird occurrence this morning however. When I started the computer up this morning openVPN worked just fine. However when the computer rebooted openVPN couldn't resolve the host address again.

MBP 8,1 (10.9.5) freezes approx. 20 minutes after booting.

If I remove one of the two RAM-modules and the MBP runs with only 2GB of RAM, it seems to work, although all processes are much slower. TC backup is not working and when trying to download Mavericks again, the computer freezes again. The freeze-problem does not occur under 10.6, here the MBP works fine. Any suggestions? Am I facing a RAM-module or HDD-problem here? Or something completely different?

Just to clarify the problem: the system only freezes when both 2GB-RAM-modules are installed. If I run the MBP on only 2GBs (no matter, which one), the system does not freeze.
Here is the report from etrecheck:
Problem description:
MBP 8,1 (10.9.5) freezes approx. 20 minutes after booting.
EtreCheck version: 2.1.8 (121)
Report generated 16. Februar 2015 14:23:00 MEZ
Download EtreCheck from http://etresoft.com/etrecheck
Click the [Click for support] links for help with non-Apple products.
Click the [Click for details] links for more information about that line.
Hardware Information: ℹ️
 MacBook Pro (13-inch, Early 2011) (Technical Specifications)
 MacBook Pro - model: MacBookPro8,1
 1 2.3 GHz Intel Core i5 CPU: 2-core
 2 GB RAM Upgradeable
 BANK 0/DIMM0
 2 GB DDR3 1333 MHz ok
 BANK 1/DIMM0
 Empty
 Bluetooth: Old - Handoff/Airdrop2 not supported
 Wireless: en1: 802.11 a/b/g/n
 Battery Health: Normal - Cycle count 338
System Software: ℹ️
 OS X 10.9.5 (13F34) - Time since boot: 0:24:30
Disk Information: ℹ️
 WDC WD5000BEVT-00A0RT0 disk0 : (500,11 GB)
 EFI (disk0s1) <not mounted> : 210 MB
 MBP HDD (disk0s2) / [Startup]: 478.21 GB (12.97 GB free) (Low!)
 Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
 10.6 - Snow Leopard (disk0s4) /Volumes/10.6 - Snow Leopard : 16.26 GB (4.03 GB free)
 MATSHITADVD-R UJ-8A8
USB Information: ℹ️
 Apple Computer, Inc. IR Receiver
 hp deskjet 5600
 Logitech USB Optical Mouse
 Canon CanoScan
 LaCie LaCie d2 DVDRW FW/USB
 Brother HL-2030 series
 Apple Inc. FaceTime HD Camera (Built-in)
 PI-410 External USB HDD 1 TB
 EFI (disk1s1) <not mounted> : 210 MB
 TimeMachine1 (disk1s2) /Volumes/TimeMachine1 : 999.86 GB (585.34 GB free)
 Apple Inc. Apple Internal Keyboard / Trackpad
 Apple Inc. BRCM2070 Hub
 Apple Inc. Bluetooth USB Host Controller
Thunderbolt Information: ℹ️
 Apple Inc. thunderbolt_bus
Gatekeeper: ℹ️
 Mac App Store and identified developers
Kernel Extensions: ℹ️
 /System/Library/Extensions
 [not loaded] com.devguru.driver.SamsungComposite (1.2.53 - SDK 10.6) [Click for support]
 [not loaded] com.elgato.driver.DontMatchAfaTech (1.1) [Click for support]
 [not loaded] com.elgato.driver.DontMatchCinergy450 (1.1) [Click for support]
 [not loaded] com.elgato.driver.DontMatchCinergyXS (1.1) [Click for support]
 [not loaded] com.elgato.driver.DontMatchEmpia (1.1) [Click for support]
 [loaded] com.iospirit.driver.rbiokithelper (1.21 - SDK 10.6) [Click for support]
 [not loaded] com.keyspan.iokit.DMRantiClassic (1.4) [Click for support]
 [not loaded] com.olympus.CamBlockCommandsDeviceUP (3.1.0 - SDK 10.6) [Click for support]
 /System/Library/Extensions/RBIOKitHelper.kext/Contents/PlugIns
 [not loaded] com.iospirit.driver.RBTSRPlugin (1.18 - SDK 10.6) [Click for support]
 /System/Library/Extensions/ssuddrv.kext/Contents/PlugIns
 [not loaded] com.devguru.driver.SamsungACMControl (1.2.53 - SDK 10.6) [Click for support]
 [not loaded] com.devguru.driver.SamsungACMData (1.2.53 - SDK 10.6) [Click for support]
 [not loaded] com.devguru.driver.SamsungMTP (1.2.53 - SDK 10.5) [Click for support]
 [not loaded] com.devguru.driver.SamsungSerial (1.2.53 - SDK 10.6) [Click for support]
Launch Agents: ℹ️
 [loaded] com.cisco.anyconnect.gui.plist [Click for support]
 [loaded] com.citrix.AuthManager_Mac.plist [Click for support]
 [running] com.citrix.ServiceRecords.plist [Click for support]
 [running] com.synology.SynoSIMBL.plist [Click for support]
 [loaded] com.synology.SynoSIMBL_RefreshFinder.plist [Click for support]
Launch Daemons: ℹ️
 [loaded] com.adobe.fpsaud.plist [Click for support]
 [running] com.cisco.anyconnect.vpnagentd.plist [Click for support]
 [failed] com.cleverfiles.cfbackd.plist [Click for support] [Click for details]
 [loaded] com.iospirit.candelair.daemon.plist [Click for support]
 [loaded] com.iospirit.candelair.sync.plist [Click for support]
 [loaded] com.macpaw.CleanMyMac2.Agent.plist [Click for support]
 [loaded] com.microsoft.office.licensing.helper.plist [Click for support]
 [loaded] com.oracle.java.JavaUpdateHelper.plist [Click for support]
 [loaded] com.regularrateandrhythm.rowmotehelperaide.plist [Click for support]
 [running] com.tobit.rfx-server.plist [Click for support]
User Launch Agents: ℹ️
 [loaded] com.adobe.ARM.[...].plist [Click for support]
 [failed] com.apple.CSConfigDotMacCert-[...]@me.com-SharedServices.Agent.plist [Click for details]
 [loaded] com.facebook.videochat.[redacted].plist [Click for support]
 [loaded] com.google.keystone.agent.plist [Click for support]
 [running] com.spotify.webhelper.plist [Click for support]
 [running] com.vemedio.Snowtape.RadioAgent.plist [Click for support]
 [running] net.presenterapp.PresenterServer.plist [Click for support]
User Login Items: ℹ️
 iTunesHelper Programm (/Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)
 Citations Programm (/Applications/Papers.app/Contents/SharedSupport/Citations.app)
 Dropbox Programm (/Applications/Dropbox.app)
 CNQL1213_ButtonManager Programm Hidden (/Library/CFMSupport/CNQL1213_ButtonManager.app)
Internet Plug-ins: ℹ️
 DirectorShockwave: Version: 11.6.0r626 [Click for support]
 Google Earth Web Plug-in: Version: 6.1 [Click for support]
 Default Browser: Version: 537 - SDK 10.9
 Flip4Mac WMV Plugin: Version: 2.4.4.2 [Click for support]
 OVSHelper: Version: 1.1 [Click for support]
 AdobePDFViewerNPAPI: Version: 10.1.13 [Click for support]
 FlashPlayer-10.6: Version: 16.0.0.305 - SDK 10.6 [Click for support]
 DivXBrowserPlugin: Version: 2.1 [Click for support]
 Silverlight: Version: 5.1.30514.0 - SDK 10.6 [Click for support]
 Flash Player: Version: 16.0.0.305 - SDK 10.6 [Click for support]
 iPhotoPhotocast: Version: 7.0 - SDK 10.8
 CitrixICAClientPlugIn: Version: 1.0 - SDK 10.6 [Click for support]
 QuickTime Plugin: Version: 7.7.3
 AdobePDFViewer: Version: 10.1.13 [Click for support]
 SharePointBrowserPlugin: Version: 14.2.0 - SDK 10.6 [Click for support]
 JavaAppletPlugin: Version: Java 8 Update 25 Check version
User internet Plug-ins: ℹ️
 RealPlayer Plugin: Version: Unknown
 Google Earth Web Plug-in: Version: Unknown
Safari Extensions: ℹ️
 Open in Papers
 TinEye
 Add To Amazon Wish List
 Pin It Button
 Evernote Web Clipper
 DivX Plus Web Player HTML5 <video>
 Clip to DEVONthink
 My eBay Manager
Audio Plug-ins: ℹ️
 EcammAudioLoader: Version: 1.0.2 - SDK 10.8 [Click for support]
 CallRecorder: Version: v2.5.8 - SDK 10.8 [Click for support]
3rd Party Preference Panes: ℹ️
 Citrix ShareFile Sync [Click for support]
 DivX [Click for support]
 Flash Player [Click for support]
 Flip4Mac WMV [Click for support]
 iPhonePresenter [Click for support]
Time Machine: ℹ️
 Skip System Files: NO
 Mobile backups: ON
 Auto backup: YES
 Volumes being backed up:
 MBP HDD: Disk size: 478.21 GB Disk used: 465.24 GB
 Destinations:
 TimeMachine1 [Local]
 Total size: 0 B
 Total number of backups: 5
 Oldest backup: 2014-04-17 22:08:55 +0000
 Last backup: 2014-06-11 14:38:01 +0000
 Size of backup disk: Too small
 Backup size 0 B < (Disk used 465.24 GB X 3)
Top Processes by CPU: ℹ️
 14% WindowServer
 11% storeagent
 2% Finder
 1% Dock
 1% Safari
Top Processes by Memory: ℹ️
 176 MB Safari
 50 MB com.apple.WebKit.WebContent
 30 MB storeagent
 26 MB Finder
 24 MB WindowServer
Virtual Memory Information: ℹ️
 14 MB Free RAM
 554 MB Active RAM
 552 MB Inactive RAM
 745 MB Wired RAM
 1.01 GB Page-ins
 398 MB Page-outs
Diagnostics Information: ℹ️
 Feb 16, 2015, 01:58:49 PM /Users/[redacted]/Library/Logs/DiagnosticReports/PresenterServer_2015-02-16-135 849_[redacted].crash
 Feb 16, 2015, 01:32:59 PM Self test - passed
 Feb 16, 2015, 10:14:52 AM /Library/Logs/DiagnosticReports/Safari_2015-02-16-101452_[redacted].hang
 Feb 16, 2015, 07:50:33 AM /Library/Logs/DiagnosticReports/Safari_2015-02-16-075033_[redacted].hang
 Feb 16, 2015, 07:50:32 AM /Library/Logs/DiagnosticReports/Mail_2015-02-16-075032_[redacted].hang
 Feb 15, 2015, 10:34:48 PM /Users/[redacted]/Library/Logs/DiagnosticReports/PresenterServer_2015-02-15-223 448_[redacted].crash
 Feb 15, 2015, 07:49:22 PM /Library/Logs/DiagnosticReports/Safari_2015-02-15-194922_[redacted].hang
 Feb 14, 2015, 10:46:59 PM /Library/Logs/DiagnosticReports/Safari_2015-02-14-224659_[redacted].hang
 Feb 16, 2015, 07:50:32 AM /Library/Logs/DiagnosticReports/Safari_2015-02-16-075032_[redacted].hang
 Feb 15, 2015, 03:33:15 PM /Library/Logs/DiagnosticReports/Preview_2015-02-15-153315_[redacted].hang

Freeze when connecting to wifi after waking from sleep

This problem was isolated to my Powerbook when I wanted to connect to a public hotspot (it started with the latest updates). Now, however, after updating my iMac G5 with all the latest updates, it's happening to it at home on my own wireless network.
When I wake my computer, it freezes when trying to reconnect to the wireless network. The only way to get access is to hold the power button down long enough for it to shut down and then upon restart I have a workable computer that can connect to the internet fine.
I've repaired permissions and repaired my disk from the install CD. I've waited up to fifteen minutes to see if the freeze would terminate with some process timing out, but no luck.
The beachball appears when I rollover the airport status in the menu bar (and the volume and clock) but doesn't appear when I rollover other items in the menu bar (quicksilver and norton). However, if I click on anything everything freezes and the beachball "just won't quit."
Anyone have a clue what's going on? All help is very much appreciated.
thanks,
bryan

Hi bryan. Welcome to the Discussions.
1. You wrote: "When I wake my computer, it freezes when trying to reconnect to the wireless network. "
1.1. How do you know that the problem is specifically related to trying to reconnect to your home WiFi network, as opposed to some other potential cause of a wake-from-sleep freeze?
1.2. Are you using an AirPort base station or third-party base station? If third-party, what specific make and model?2. You wrote: "I've repaired permissions and repaired my disk from the install CD."DId Repair Disk find any errors, even those it may have corrected? If so, did you write them down?
3. You wrote: "The beachball appears when I rollover the airport status in the menu bar (and the volume and clock) but doesn't appear when I rollover other items in the menu bar (quicksilver and norton). However, if I click on anything everything freezes and the beachball "just won't quit.""Could be one of the other menu extras you have installed, i.e. the icons on the right side of the menu bar other than the Spotlight icon. Often menu extras are launched as Startup or Login items. My "Troubleshooting Startup and Login Items" FAQ can help you pin that down if such an item is causing the problem. Note that your AirPort connection won't work in Safe Mode, but it gives you a way of testing if the wake-from-sleep or menu extra freeze is related to a menu extra, especially a third-party menu extra launched as a Startup or Login item.
4. See if your computer's serial number is in the range specified in the "iMac G5 Repair Extension Program for Video and Power Issues" document.
5. As far as general iMac G5 troubleshooting goes:5.1. Rule out potential hardware problems. Run the Apple Hardware Test that came with the computer. Instructions for doing so will be found in the hardcopy manual that accompanied your computer. For additional details, see my "Apple Hardware Test" FAQ.
5.2. Check the diagnostic LEDs, a feature of your iMac G5. See "About the iMac G5 diagnostic LEDs."
5.3. If your iMac G5 will not turn on, see "iMac G5: Troubleshooting when your computer won't turn on."
5.4. See also the iMac Service & Support site.
5.5. Check the iMac G5 Discussions for similar reports from other users.
5.6. As a general check, run the procedure specified in my "Resolving Disk, Permission, and Cache Corruption" FAQ. Perform the steps therein in the order specified. While you've done some of these steps already, it won't hurt to double-check this.
5.7. If the computer is either under warranty or covered by an AppleCare Protection Plan, don't hesitate to take advantage of your warranty and contact AppleCare.Good luck!
Dr. Smoke
Author: Troubleshooting Mac® OS X
Note: The information provided in the link(s) above is freely available. However, because I own The X Lab™, a commercial Web site to which some of these links point, the Apple Discussions Terms of Use require I include the following disclosure statement with this post:
I may receive some form of compensation, financial or otherwise, from my recommendation or link.

Computer freezes when moving files from USB, or to another partitioned HD

Hello, i've been moving files from two USB's to my Macintosh HD, and when I do that, the computer kinda freezes up, i can move the cursor, but not kinda click anywhere, and then a minute after or something, it gets normal again, but the transfer is going horribly slow. this happens when i move from Macintosh HD, to Macintosh HD 2 (a partitioned one). the files are 2 gb each USB. which means im transferring 4 gb at the time.

Neurot wrote:
I have 6 folders on my hard drive. These folders were created by downloading a bunch of rar files, then extracting them each to their own folder. I have not touched the permissions, so they should be the default of me having read/write and everyone else having read (correct me if i'm wrong).
Using two Finder windows, I drag and drop the six folders from one hard drive to another, and hold down the Apple key so that it moves instead of copies. I let go and it starts copying the files (since there is no "move", but rather a "copy and then delete").
I would recommend you don't use this method to move a lot of files between drives. it's much safer first to copy and if the copy is successful to delete the original afterward. there was a data loss bug in OS X a while back that wold sometimes lead to total loss on both the source and the target when doing this.
this bug is supposed to be long fixed but still...
How is the hard drive you are moving the files to formatted? what yo describe sometimes happens when moving a lot of stuff to or from FAT formatted drives. also, repair both drives in disk utility. repair disk, not permissions.
Message was edited by: V.K.

Mountain Lion freezes (SBBOD) exactly one hour after boot

Like many others, I experience the SBBOD on my MBP early 2011 with (GB of RAM and plenty of HD space. I upgraded in Sep/Oct, and everything has been running smoothly up until two weeks ago when I first experienced a crash. Now my MBP freezes EXACTLY one hour after boot or reboot.
I have tried resetting NVRAM/PRAM, ran the HW Test (no errors), repaired permissions, reinstalled OS, cleaned out outdated SW, plugins and prefs, reset the SMC, cleared caches, deleted the Finder prefs, Time Machine prefs and God only knows what else I've tried of tips & tricks I've found after googling this for a week. I'm running Console constantly, but this doesn't make me much wiser. Sometimes it doesn't record the last minutes before a crash, but the only messages that seem to show up fairly consistently lately are these:
07.02.13 13:39:29,541 apsd[72]: Unable to bootstrap_lookup connection port for 'com.apple.ubd.system-push': Unknown service name
07.02.13 13:39:46,169 com.apple.quicklook.satellite[200]: bootstrap_look_up2 failed with 0x44c
I also saw this a little earlier today:
07.02.13 09:38:56,000 kernel[0]: Got boot device = IOService:/AppleACPIPlatformExpert/PCI0@0/AppleACPIPCI/SATA@1F,2/AppleIntelPchS eriesAHCI/PRT0@0/IOAHCIDevice@0/AppleAHCIDiskDriver/IOAHCIBlockStorageDevice/IOB lockStorageDriver/M4-CT512M4SSD2 Media/IOGUIDPartitionScheme/uten navn@2
which puzzles me a bit, because I have no volume called "uten navn" (translates to "no name") hooked up to my MBP.
I'm running Adobe CS5, updated web browsers, Office 2011, Apple Mail/Contacts/Calendar/Messages - but the SBBOD happens in any SW, and also if no SW is opened at all (except Finder). It even happens if I start my Mac in safe mode.
this is seriously frustrating - so if anyone has any idea what's going on, it would be much appreciated.

UPDATE:
Forget it, I found the solution in a dodgy corner of the discussions: a firmware upgrade as described at the bottom of this thread.

Computer locks up right after boot due to driver confl

When I have to shut down my compter or do a restart it locks up right after it boots up. The only way I can get it going is to go into safe mode, disable the Audigy 2 sound card, restart then after the boot up re-enable the sound card. Everything works fine then until I have to do another restart. I don't know which other program the conflict is with. I am running Windows xp home edition. Anybody got any ideas. How can I find out what the sound card is conflicting with?

You can try the following:
- uninstall the Audigy 2 and use Driver Cleaner or Driversweeper (you can find them at [url="http://www.guru3d.com/">Guru3D[/url]) in Windows Safe mode to get rid of older drivers/Windows registers that get stuck in the Window System which can cause problems for your pc;
- reinstall the driver for the Audigy 2;
- if you have onboard sound, disable the onboard sound via the bios of your motherboard;
Good luck!?

Late 2007 MB Freezes when waking from Sleep after Lion Upgrade

I have a Late 2007 MacBook that I recently upgraded from Snow Leopard to Lion. Since the upgrade, the computer occassionally freezes when waking up from Sleep (putting it to sleep by shutting the screen). Sometimes, I will see about 1-2 seconds of activity (i.e. AIrPort icon searching for network), but then the screen will turn black and the computer will restart. Other times, I actually get a kernel panic.
I never had this issue with Snow Leopard, and it seems to happen more often if I try to use the computer (i.e. move the mouse or press a key on the keyboard) immediately after I open the screen and while it's still waking up. By being patient and giving the computer 5-10 seconds to wake up, it seems to only freeze about 1 out of every 7 times when waking up, but it's stil frustrating to not know whether or not I'm going to lose my work anytime I put the computer to sleep.
From other issues that I've researched, I've disabled Bluetooth completely (which reportedly fixed some similar issues), but I still had periodic freezes even with it disabled.
The only thing I can think of that might be contributing to a weird hardware issue is that the AirPort card died on me a few years ago, and I had to replace it with an AirPort Extreme from a Late 2007 15" MacBook Pro (I'm pretty sure the model of the card I put in is AR5BXB72, although I could open my computer back up to verify if that would be helpful). Snow Leopard seemed to be perfectly fine with that card, and Lion is ok for the most part (WiFi works perfectly fine), but I'm wondering if I need to update/change any Kexts for that piece of hardware.
Here is one of the kernel panic reports from about 2 weeks ago:
Sat Jan 19 20:56:41 2013
Machine-check capabilities (cpu 1) 0x0000000000000806:
family: 6 model: 15 stepping: 10 microcode: 146
Intel(R) Core(TM)2 Duo CPU     T7300 @ 2.00GHz
6 error-reporting banks
threshold-based error status present
Machine-check status 0x0000000000000004:
machine-check in progress
MCA error-reporting registers:
IA32_MC0_STATUS(0x401): 0xf200004000000800 valid
MCA error code:            0x0800
Model specific error code: 0x0000
Other information:         0x00000040
Threshold-based status:    Undefined
Status bits:
   Processor context corrupt
   Error enabled
   Uncorrected error
   Error overflow
IA32_MC1_STATUS(0x405): 0x0000000000000000 invalid
IA32_MC2_STATUS(0x409): 0x0000000000000000 invalid
IA32_MC3_STATUS(0x40d): 0x0020000000000000 invalid
IA32_MC4_STATUS(0x411): 0x0000000000000011 invalid
IA32_MC5_STATUS(0x415): 0xf200241010040400 valid
MCA error code:            0x0400
Model specific error code: 0x1004
Other information:         0x00002410
Threshold-based status:    Undefined
Status bits:
   Processor context corrupt
   Error enabled
   Uncorrected error
   Error overflow
panic(cpu 0 caller 0x2cf3cc): "Machine Check at 0x00dfa4c8, trapno:0x12, err:0x0," "registers:\n" "CR0: 0x8001003b, CR2: 0x55cfe000, CR3: 0x2b84c000, CR4: 0x00000660\n" "EAX: 0x559edc20, EBX: 0x072db000, ECX: 0x00e0c428, EDX: 0x00000000\n" "ESP: 0x0010be00, EBP: 0x0010be68, ESI: 0x072d9000, EDI: 0x072d1280\n" "EFL: 0x00010006, EIP: 0x00dfa4c8\n"@/SourceCache/xnu/xnu-1699.32.7/osfmk/i386/trap_native.c:258
Backtrace (CPU 0), Frame : Return Address (4 potential args on stack)
0x818d98 : 0x2203de (0x6b08cc 0x818db8 0x229fb0 0x0)
0x818dc8 : 0x2cf3cc (0x6bde94 0x6bdfc8 0xdfa4c8 0x12)
0x818f38 : 0x2cf409 (0x818f70 0xde 0x6bdfc8 0x1)
0x818f58 : 0x2e6182 (0x818f70 0x0 0x0 0x0)
0x10be68 : 0xdfa9a2 (0x72d9000 0x0 0x10bea8 0x22fb7f)
0x10be88 : 0x666bb6 (0x72d9000 0x72d1280 0x75b2904 0x663d5e)
0x10beb8 : 0x67cb5f (0x72d1280 0x0 0x7295080 0x0)
0x10bef8 : 0x1ae3691 (0x72d1200 0x0 0x72d1200 0x0)
0x10bf28 : 0x1b03351 (0x7277500 0x0 0x0 0x55)
0x10bf48 : 0x1b0e7a3 (0x55 0x2d0d29 0x0 0x1313d70)
0x10bf78 : 0x69ca2d (0x71c8680 0x0 0x71e3180 0x55)
0x10bf98 : 0x2ceba4 (0x55 0x10eb710 0x4 0x0)
0x10bfd8 : 0x2e570e (0x10eb710 0x2c5db0 0x0 0x2c5e0b)
0x10eb808 : 0x527e2f (0x6c42c8 0x19 0x80cc82e 0x10eb868)
0x10eb878 : 0x5286a9 (0x7513aa0 0x10eb8f0 0x743a004 0x0)
0x10eb8d8 : 0x32b069 (0x10eb8f0 0x0 0x0 0x0)
0x10eb918 : 0x322e68 (0x74fabc0 0x6c42c8 0x0 0x10eb978)
0x10eb948 : 0x32920c (0x74fabc0 0x6c42c8 0x0 0x10eb978)
0x10eb988 : 0x32c81b (0x804bf3c 0x10ebae0 0x804bf3c 0x10ebb28)
0x10eb9b8 : 0x308afb (0x74fabc0 0x10ebae0 0x804bf3c 0x0)
0x10ebc28 : 0x54d235 (0x72803e0 0x0 0x880 0x804bf3c)
0x10ebc58 : 0x307d0e (0x73dbb04 0x72803e0 0x880 0x804bf3c)
0x10ebc88 : 0x321fb2 (0x74fabc0 0x0 0x880 0x804bf3c)
0x10ebca8 : 0x316802 (0x74fabc0 0x10ebd60 0x0 0x1)
0x10ebdd8 : 0x317478 (0x5f607c0 0x1 0x0 0x0)
0x10ebf78 : 0x5f3c2a (0x7564828 0x10846394 0x804be80 0x7f81cd0)
0x10ebfc8 : 0x2e60a7 (0x10846390 0x0 0x2c7d1b 0x10846390)
      Kernel Extensions in backtrace:
         com.apple.driver.AppleACPIPlatform(1.5)[C5484D26-28D3-4DA8-B2C0-7A3EB8F38BD5]@0 x1b01000->0x1b56fff
            dependency: com.apple.iokit.IOACPIFamily(1.4)[5EC48FA0-6225-414F-ABAB-A898F91B7E15]@0xa8700 0
            dependency: com.apple.iokit.IOPCIFamily(2.7)[8087C029-833E-4B62-A8C3-2B074B4C55F7]@0xb3c000
         com.apple.driver.AppleAPIC(1.6)[5BEB4F30-F328-4086-9502-DE97ED5448F2]@0x1ae2000 ->0x1ae5fff
         com.apple.driver.AppleUSBEHCI(5.1)[607ED327-88BE-4ABF-A666-AD1D02B3D03E]@0xdf60 00->0xe15fff
            dependency: com.apple.iokit.IOUSBFamily(5.1.0)[ACF52DAA-24ED-4520-A3A1-4B4C3C53C8A5]@0xcae0 00
            dependency: com.apple.iokit.IOPCIFamily(2.7)[8087C029-833E-4B62-A8C3-2B074B4C55F7]@0xb3c000
BSD process name corresponding to current thread: mds
Mac OS version:
11G63
Kernel version:
Darwin Kernel Version 11.4.2: Thu Aug 23 16:26:45 PDT 2012; root:xnu-1699.32.7~1/RELEASE_I386
Kernel UUID: 859B45FB-14BB-35ED-B823-08393C63E13B
System model name: MacBook3,1 (Mac-F22788C8)
System uptime in nanoseconds: 32336204274368
last loaded kext at 206807220187: com.apple.filesystems.smbfs    1.7.2 (addr 0xaa8000, size 249856)
last unloaded kext at 211045878088: com.apple.driver.USBCameraFirmwareLoader    1.1.0 (addr 0xdaf000, size 24576)
loaded kexts:
com.logmein.driver.LogMeInSoundDriver    1.0.0
com.apple.filesystems.smbfs    1.7.2
com.apple.driver.AudioAUUC    1.59
com.apple.filesystems.autofs    3.0
com.apple.driver.AppleHWSensor    1.9.5d0
com.apple.driver.AppleHDA    2.2.5a5
com.apple.driver.AppleSMCPDRC    5.0.0d8
com.apple.driver.AppleUpstreamUserClient    3.5.9
com.apple.driver.AppleIntelGMAX3100    7.0.4
com.apple.driver.AppleIntelGMAX3100FB    7.0.4
com.apple.driver.SMCMotionSensor    3.0.2d6
com.apple.iokit.IOUserEthernet    1.0.0d1
com.apple.iokit.IOBluetoothSerialManager    4.0.8f17
com.apple.Dont_Steal_Mac_OS_X    7.0.0
com.apple.driver.AudioIPCDriver    1.2.3
com.apple.driver.ApplePolicyControl    3.1.33
com.apple.driver.AirPort.Atheros21    431.14.10
com.apple.driver.AppleLPC    1.6.0
com.apple.driver.ACPI_SMC_PlatformPlugin    5.0.0d8
com.apple.driver.AppleBacklight    170.2.2
com.apple.driver.AppleMCCSControl    1.0.33
com.apple.driver.CSRUSBBluetoothHCIController    4.0.8f17
com.apple.driver.AppleUSBTrackpad    227.6
com.apple.driver.AppleUSBTCKeyEventDriver    227.6
com.apple.driver.AppleUSBTCKeyboard    227.6
com.apple.driver.AppleIRController    312
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless    1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib    1.0.0d1
com.apple.BootCache    33
com.apple.iokit.SCSITaskUserClient    3.2.1
com.apple.driver.XsanFilter    404
com.apple.iokit.IOAHCIBlockStorage    2.1.0
com.apple.driver.AppleUSBHub    5.1.0
com.apple.driver.AppleEFINVRAM    1.6.1
com.apple.driver.AppleFWOHCI    4.9.0
com.apple.driver.AppleHPET    1.7
com.apple.driver.AppleAHCIPort    2.3.1
com.apple.driver.AppleIntelPIIXATA    2.5.1
com.apple.driver.AppleUSBEHCI    5.1.0
com.apple.iokit.AppleYukon2    3.2.2b1
com.apple.driver.AppleUSBUHCI    5.1.0
com.apple.driver.AppleRTC    1.5
com.apple.driver.AppleSmartBatteryManager    161.0.0
com.apple.driver.AppleACPIButtons    1.5
com.apple.driver.AppleSMBIOS    1.9
com.apple.driver.AppleACPIEC    1.5
com.apple.driver.AppleAPIC    1.6
com.apple.driver.AppleIntelCPUPowerManagementClient    195.0.0
com.apple.nke.applicationfirewall    3.2.30
com.apple.security.quarantine    1.4
com.apple.security.TMSafetyNet    8
com.apple.driver.AppleIntelCPUPowerManagement    195.0.0
com.apple.kext.triggers    1.0
com.apple.driver.DspFuncLib    2.2.5a5
com.apple.iokit.IOSurface    80.0.2
com.apple.iokit.IOSerialFamily    10.0.5
com.apple.iokit.IOAudioFamily    1.8.6fc18
com.apple.kext.OSvKernDSPLib    1.3
com.apple.iokit.IOFireWireIP    2.2.5
com.apple.iokit.IO80211Family    420.3
com.apple.driver.AppleHDAController    2.2.5a5
com.apple.iokit.IOHDAFamily    2.2.5a5
com.apple.driver.AppleGraphicsControl    3.1.33
com.apple.driver.AppleSMC    3.1.3d10
com.apple.driver.IOPlatformPluginLegacy    5.0.0d8
com.apple.driver.IOPlatformPluginFamily    5.1.1d6
com.apple.driver.AppleBacklightExpert    1.0.4
com.apple.driver.AppleSMBusController    1.0.10d0
com.apple.iokit.IONDRVSupport    2.3.4
com.apple.iokit.IOGraphicsFamily    2.3.4
com.apple.driver.AppleUSBBluetoothHCIController    4.0.8f17
com.apple.iokit.IOBluetoothFamily    4.0.8f17
com.apple.driver.AppleUSBMergeNub    5.1.0
com.apple.iokit.IOUSBHIDDriver    5.0.0
com.apple.driver.AppleUSBComposite    5.0.0
com.apple.iokit.IOSCSIMultimediaCommandsDevice    3.2.1
com.apple.iokit.IOBDStorageFamily    1.7
com.apple.iokit.IODVDStorageFamily    1.7.1
com.apple.iokit.IOCDStorageFamily    1.7.1
com.apple.iokit.IOATAPIProtocolTransport    3.0.0
com.apple.iokit.IOSCSIArchitectureModelFamily    3.2.1
com.apple.iokit.IOUSBUserClient    5.0.0
com.apple.iokit.IOFireWireFamily    4.4.8
com.apple.iokit.IOAHCIFamily    2.0.8
com.apple.iokit.IOATAFamily    2.5.1
com.apple.iokit.IONetworkingFamily    2.1
com.apple.iokit.IOUSBFamily    5.1.0
com.apple.driver.AppleEFIRuntime    1.6.1
com.apple.iokit.IOHIDFamily    1.7.1
com.apple.iokit.IOSMBusFamily    1.1
com.apple.security.sandbox    177.8
com.apple.kext.AppleMatch    1.0.0d1
com.apple.driver.DiskImages    331.7
com.apple.iokit.IOStorageFamily    1.7.2
com.apple.driver.AppleKeyStore    28.18
com.apple.driver.AppleACPIPlatform    1.5
com.apple.iokit.IOPCIFamily    2.7
com.apple.iokit.IOACPIFamily    1.4
And here is an odd one from just the other day (this is the entire panic report when viewing it in Console):
Thu Jan 31 18:37:05 2013
Machine-check capabilities (cpu 1) 0x0000000000000806:
family: 6 mPdaei: c(CPU10):5 snepresing: sive1pr0c smsori(rotodhie C:U did n14 a6know edge Intenrupts)tTLeB slate(0x1R
Any thoughts??

....anyone have any ideas?

Dump when executing DTP right after infopackage in BI 7.0 SP 7

Hello.
whenever I try to execute DTP right after run infopackage (eg.master loading), exception error occurs like below.
"A RAISE statement in the program "SAPLRSSTATMAN" raised the exception"
can't find any notes related to this problem in SAP notes.
that is okay when i try this job with intervals though.(10sec or so.)
Is there any solution about this?
Thanks in advance.

This sounds like you need to create a customer message. You haven't sent the dump but from the process I would guess that some data is still stuck on the database. Anyway a RAISE where you don't find a note is always worth a customer message if you can reproduce it.
Best regards
Dirk

MacBook Pro mid 2010 goes to sleep right after booting

Hello and thank you in advance to anyone that can help me. I have a MacBook Pro mid 2010 and I recently spill tea on the computer. I took everything and dried out everything hoping and praying that it will start again. I put everything back together and it started but right after starting (like 15 seconds after) the monitor goes to sleep right away. But here is the weird thing; I have Windows 8 installed on bootcamp, so if I start on bootcamp, it starts with no problem. I am actually writing this from my macbook but on bootcamp. Any ideas why it goes to sleep on Mac but in Windows seems to be working just fine?

Power or other problems related to unexpected system sleep, shutdown, lights or fans call for an SMC reset. Read all the steps.
Before Resetting the SMC
Try each of the following steps in this order before you reset the SMC. Test the issue after completing each troubleshooting step to determine if the issue still occurs.
Press Command + Option + Escape to force quit any application that is not responding.
Put your Mac to sleep by choosing the Apple () menu from the upper-left menu bar and then choosing Sleep. Wake the computer after it has gone to sleep.
Restart your Mac by choosing the Apple () menu from the upper-left menu bar and then choosing Restart.
Shut down your Mac by choosing the Apple () menu from the upper-left menu bar and then choosing Shut Down.
Resetting the SMC on portables with a battery you should not remove on your own
Shut down the computer.
Plug in the MagSafe power adapter to a power source, connecting it to the Mac if it's not already connected.
On the built-in keyboard, press the (left side) Shift-Control-Option keys and the power button at the same time. The power adapter indicator light will cycle off / on once.
Release all the keys and the power button at the same time.
Press the power button to turn on the computer.

Syncing to iPhone 3GS - Freezes when Photos are synced, after 1st sync

Using iTunes 9.1.1.12 and iPhone 3GS 3.1.3.
When syncing, the sync freezes when Photos are included to be synced. It just hangs at the end of the sync process, and never completes.
If I don't include the Photos to be synced, it syncs fine.
If I then choose to re-sync the Photos and delete the folder: "iPod Photo Cache"... It re-syncs fine again (and places all photos on iPhone). But if I immediately sync again, without un-checking Photos to be synced, it hangs again at the end.
Please help.

They are scaled down.

Macbook pro freezes when moved / wifi problem

Hi guys,
This is driving me nuts. I've read some other post on the internet with the same problem but still no clue how to fix this.
Okay so this is what happens. Eather my wifi works but my macbook freezes when I move it. Or the wifi doesnt work (no hardware detected) and the laptop doesnt freeze.
Ive been to the genius bar here in Amsterdam, replaced the wifi but his didnt help, still freezing with wifi, or no wifi at all.
Other actions taken:
PRAM reset
SMC reset
replaced ram, to test
Reinstalled the whole laptop.
Does anybody have a clue what to do?
Thanks,
Timon

I have tried all suggestions I found on Internet
Then take your MPB to your local AS or an AASP. Diagnostic testing is FREE!
Contact the router manufacturer.
If you are still under warranty and/or have AppleCare, call them. Let them deal w/it.

T60 freezes when moving trackpoint right after boot

Similar Messages

Maybe you are looking for