T60 - Hard Disk (other than lenovo and IBM)

Hi,
I want a buy 160 GB hard disk for T60 - 1952 - CTO model.
Will T60 support 250 and 320 GB HDD ?
Are there any other compatible hard drives available in the market apart from buying it from Lenovo or IBM.  The HDD of IBM/Lenovo are quite expensive.
What is the risk that I run if I purchase a hard drive from Seagate or any other manufacturer.
Thanks,
Rahul.

Any SATA drive would do.  You remove the hard drive cover, pull out the hard drive, then you will see the original drive.  Remove the four screws holding the caddy to the drive, put the new drive in the caddy, re-screw, re-cover then reload your Ubuntu OS :smiley: operating system.

Similar Messages

  • Issues with Catalogs in Organiser when photos on hard disk other than C:

    Hello Folks;
    I face the following issue with PSE7 :
    the Catalog function does not work when I try to import pictures located on any other hard disk different from C: disk.
    In other words, the following happens :
    1) in the Organiser, I create a new Catalog (on C: disk or on F: disk)
    2) I import pictures located in a directory on disk F:
    3) when I try to review the "cataloged" images one by one  , PSE7 gives the message that he has lost the connection to the images and a window opens asking to RECONNECT the files;
    4) I then browse to the right directory , find the files and try to reconnect  back to the original image (that was not moved to another place nor renamed !) the system does not reconnect te picture with the catalog
    5) in short : PSE7 is unusable when pictures are not located on C: disk
    I contacted the support (since I ahve a legal version , yes !) but they seem to consider this normal ; catalog and pictures must be on the same disk drive they told me . Unbelievable !
    This surprises me because : with PSE4 (my former version) , this worked withiout any problem !
    I consider this as a ral software bug, isn't it ?
    I am still in touch with Adobe's support but it takes time .. and still no solution ..
    Did someone face the same issue ? Suffering in group is less painfull as anyone knows .. ;-)
    Any solution at sight ?  ;-)
    Thanks a lot for any help on this, I am totally stuck here ... !
    Claude

    THANKS a lot dj-paige   ... !!!
    Thanks to the psedbtool (thanks  john rellis too  !) .. I could diagnose the problem : my two disk drives C: and F: had the same serial number .
    And even better :  I could SOLVE the problem .
    I changed the volumeid of disk F:  asexplained in john rellis's documentation .. and now PSE7's Catalog works fine !!
    (I am still waiting for a decent answer from Adobe's suuport .. it's a shame that they do not do !).
    THANKS again dj-paige  for the support received ... !!!
    I wish all problems in life could be solved as easily as this one !!!
    Greetings from Brussels , Belgium
    CLAUDE

  • Can I move MobileSync to a hard disk other than startup volume?

    I have been told many times by others 'in the know' that you have to keep certain files on the start-up volume. However, I have 2 internal HDs on my iMac, and the SSD (start up volume) is quite small - only 250GB. The other drive is 1 TB and I have about 15 TB of externals available via Lightning connection. The problem is that the internal SSD is continually filling up, and since I have several mobile devices I am synching with iTunes, they are gobbling up tons of disk space on the startup volume. Is it possible to move MOBILE SYNC to a different drive? There is nothing in 'preferences' for mobile sync that can specify the volume where these files should be stored. They are taking up almost 85GB of disk space. My temptation right now is to clone the 1TB internal over to an external drive, then clone the SSD internal over to the 1TB internal, and make that 1TB internal drive the new startup volume, but it would require reformatting and reinstalling operating system software, since there isn't any on that drive.
    I am sort of 'stuck' because when I setup a replacement iPhone on Monday from a backup of the previous phone (that had a defective antenna), about 100 recordings in the RECORDER APP were not restored to the new iPhone, and I need to dig through some iPhone backups to try to find one that might have them on it. I hate to lose some of those very valuable recordings from a one-week intensive graduate seminar.  Any suggestions for pruning the startup volume?
    Disk Inventory X is showing only 7.2GB of open space and 225.8GB full on the SSD startup volume.  Here are the big space 'hogs:'
    Users -  168.5 GB  (library 151.3GB; movies 15GB, which is odd, since all of the movies are stored externally.) In 'application support, MobileSync is taking up 82.5GB and Mail is taking up 47.9GB. (some of this mail goes way back, and needs to be archived, but I am not sure if that possibility exists in current OS)
    Applications - 16.5 GB
    Library  - 11.5GB
    iMac  - intel (3 yrs old)
    OSX 10.9.5
    iPadAir
    'the new iPad'
    iPhone 5S
    various other mac devices...

    Well iTunes itself takes up virtually no space. I believe what you are suggesting is a move of your music files. Now these files can be moved to another drive and iTunes will act just like normal. The catch is that your music files pretty much have to be in one place. If you already have all your music stored in the My Music/iTunes/iTunes Music folder than you should be good. If you do not its a little trickier. In your preferences menu of iTunes under the advanced tab there are the options to "Keep iTunes music folder organized" and to "Copy files to iTunes music folder when adding to library". You will want both of these checked. Then under the advanced tab (The one not in the preferences menu) There is an option to consolidate library. This will copy all the music in your library not in the iTunes folder to the iTunes folder. Thus you will want to delete duplicated when the process is over. (If your drive is too slim on space for this opperation... then I don't know what to tell you.) With all your music in the iTunes folder just drag and drop said folder onto the new drive. Then under the advanced tab in preferences the first option is to change the location of your iTunes music library. Simply change it to where you have stored your library on the new drive and you will be set to go.

  • What's Happening?? Some days after installing latest security up date for 10.5.8 on G4, both inernal CD/DVD drives failed to mount disks other than a cleaning disk which mounted and was imported into iTunes.No other CD or DVD disk will mount.

    What's Happening?? Some days after installing latest security update for 10.5.8 on G4, both inernal CD/DVD drives failed to mount disks other than a cleaning disk which mounted and was imported into iTunes. No other CD or DVD disk will mount.Is this a unique experience?

    Hello Robert,
    First, Safe Boot , (holding Shift key down at bootup), use Disk Utility from there to Repair Permissions, test if things work OK in Safe Mode.
    Then move these files to the Desktop...
    /Users/YourUserName/Library/Preferences/com.apple.finder.plist
    /Users/YourUserName/Library/Preferences/com.apple.systempreferences.plist
    /Users/YourUserName/Library/Preferences/com.apple.desktop.plist
    /Users/YourUserName/Library/Preferences/com.apple.recentitems.plist
    Reboot & test.
    PS. Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.

  • Can CC apps be downloaded to, and run from, a hard drive other than the OS drive?

    Can CC apps be downloaded to, and run from, a hard drive other than the OS drive?

    Yes. You can define alternate locations in teh application manager. just be aware that some components will always end up on your system root drive no matter what.
    Mylenium

  • Upgrading Hard Disk Drive of Lenovo THINKPAD T500 2055 ?

    Hi there,
    My personal laptop is Lenovo THINKPAD T500 2055, and its main specifications as follows:
    - Intel Core 2 Duo processor T9400 (2.53GHz 1066MHz 6MBL2).
    - 8 GB DDR3 SDRAM Memory Module 4 GB (2 x 4 GB) 1066MHz DDR31066/PC38500 DDR3 SDRAM SoDIMM Kingston
    - ATI Mobility Radeon 3650 with 256MB.
    - 160 GB Hard Disk Drive, 7200rpm.
    I really need to upgrade the Hard Disk Drive to a bigger size (500 GB, 7200 rpm). and, my major questions are as follows:
    * Could you please advise me on which Hard Disk Drive (500 GB, 7200 rpm) should I buy for my T500 laptop?
    For example, I found (http://www.amazon.com/gp/product/B003NSBF32) But I have no idea what T500 supports and what it doesn't... Therefore, I need your help to guide me about this matter. In other words, How do you know if ABC-Hard Disk Drive fits with T500 and XYZ-Hard Disk Drive doesnt fit? What is the clue in knowing what T500 accepts?
    My another question is:
    * How easy is it to remove/replace Hard Disk Drive in Lenovo ThinkPad T500 ???
    I already watched CRU Removals/Replacements on (http://www.lenovoservicetraining.com/ion/R61_T61/index.html), But the clip is for ThinkPad R61 and T61. So, Could you please help me how to handle it with T500 ?
    I would greatly appreciate your inputs.
    Thanks for your consideration of my request, and I very much look forward to hearing from you soon !
    Solved!
    Go to Solution.

    Hi and welcome to the forum!
    Any SATA drive that is 2.5'' wide and 9.5mm high will work in your T500. The drive you linked to meets the requirement and thus will work.
    For removal and installation instructions, have a look here:- http://www-307.ibm.com/pc/support/site.wss/migr-71568.html
    Hope this helps.
    Maliha (I don't work for lenovo)
    ThinkPads:- T400[Win 7], T60[Win 7], IBM 240[Win XP]
    IdeaPad: U350
    Apple:- Macbook Air [Snow Leopard]
    Did someone help you today? Compliment them with a Kudos!
    Was your question answered today? Mark it as an Accepted Solution! 
      Lenovo Deutsche Community     Lenovo Comunidad en Español 
    Visit my YouTube Channel

  • In itunes, can i save my music on another hard drive other than C?

    i have the program installed on my computer, i would like the music to be saved on another hard drive other than C, is there a way to do that within itunes?

    You can have multiple libraries, and switch between them using the shift-start-iTunes method. Normally a single library is all that is required. Each library connects to a single designated media folder, however you can import content from other locations if you choose. See Make a split library portable for reasons why this may not be the best approach. If you want to access the "same" library on more than one machine then you need to clone the library files as well as media.
    tt2

  • Is there any way that I can get back my iPhoto?  After having hard disk replaced (no backup) and the operating system has been updated to Lion (no disc) I am wondering if iPhoto can be reinstalled with my Leopard discs?

    Is there any way that I can get back my iPhoto?  After having hard disk replaced (no backup) and the operating system has been updated to Lion (no disc) I am wondering if iPhoto can be reinstalled with my Leopard discs?

    As Niel pointed out, yes.  The disk probably will look like the MBP disk (4) in this screenshot;
    OT

  • I have just use my laptop for only three months and my hard disk cable have break and i need a replacement

    i have just use my laptop for only three months and my hard disk cable have break and i need a replacement

    Talk to AppleCare about getting a replacement.
    Allan

  • Finder Preferences, hard disks cd's dvds, and ipods

    hello,
    I am a little confused at this. In finder preferences under the general tab tere is a menu "show these items on the desktop" and selection is
    -hard disks
    -cd,s dvds, and ipods
    -connected servers
    i have selected Hard disks, why isn't my external drive showing up? It actually will show up if I have selected cds dvds and ipods....just a little weird
    i was wondering if anyone had any solutions. thanks.

    The labelling for the second item isn't correct; what it actually does is to show or hide removable disks, which include external hard drives. Changing this setting alters the value of the ShowRemovableMediaOnDesktop key in the Finder's preferences.
    (12563)

  • How to change the  UDT's Status other than Open and Close ?

    Hello Friends,
                          I have created an table of document type and I want to set the document Status other than open and close for eg.R- Released .
    Thanks in advance.

    I think if you're using a UDF to set this Status for Marketing documents
    First you need to set what item corresponds to each Status level you're tryinf to deploy
    After that you can use SDK to set this new property or Formatted searches to change the Status you re creating, and save the document as a draft during your process and your status.
    But if you're trying to change the fiel Status used on every Marketing document (i mena the system one), you should know that it is impossible 'cause this is an only read system field.
    Hope it helps
    Gabriela

  • PO message should get failed for P.grp other than AB1 and AB2

    Hello SAP Gurus,
    I have a requirement like PO message should get failed for P.grp other than AB1 and AB2.
    Detail explanation:
    I have a P.grp AB1,AB2,AB3,AB4 etc.... The current process is once PO created and saved the message will be triggered and IDOC is transmitted to the vendor, irrespective of what ever the P.grp.
    My requirement is like the PO message should get failed if P.grp is other than AB1 and AB2, and reason should be shown any where in IDOC or in messages.
    Pls advice.
    Thanks.

    Hi Jurgen,
    Thanks for the reply...
    There are only 5 vendors which is relevant for EDI and P.grp AB1 and AB2 denotes EDI PO, same P.grp mapping has been done in PI also via data ID. The user sometimes selects the P.grp AB3, AB4 etc incorrectly and it goes to the vendor which in-turn again the customer has to amend the PO.
    Now I'm planning to include a piece of logic while saving the PO, check if the vendor is EDI vendor then P.grp should be AB1 or AB2, if it is a different P.grp  then the system will not allow to save the PO,so that the user will select the relevant P.grp for EDI vendors. Pls let me know your thought and inputs.
    Thanks.

  • I have a huge amount of my memory used by 'other' than photos and music - to my knowledge, there is nothing there apart from a few songs and photos and 5 podcasts. What could it be? How could I get rid of this 'other' stuff and get the memory back?

    I have a huge amount of my memory used by 'other' than photos and music - to my knowledge, there is nothing there apart from a few songs and photos and 5 podcasts. What could it be? How could I get rid of this 'other' stuff and get the memory back?

    See -> What is "Other" and what can I do about it? by Kappy.
    Clinton

  • IWeb protocol support for anything OTHER than http and https

    I am extremely disappointed in iWeb. It doesn't even seem to be able to do very simple things.
    All I want to do is to create HTML links to external pages with protocols other than "http" and "https" and it always prepends "http" to the beginning of the URL. This is really really really annoying.
    Apple I hope you are paying attention. iWeb is poorly designed. You are trying to anticipate what end users want...this is a development practice right from the Microsoft Windows Developer book. I sure how the next update to iWeb works properly. I'm so upset about all this...I can't publish podcasts to the web because of all the foolishness with how you handle that, and the confusing directory name issues.
    My podcast URL looks like this:
    http://itpc://www.mysite.com/podcast/News/rss.xml
    I tried (unsuccesfully) to manually create the podcast since the automated version created this:
    itpc://www.bradyconsult.com/podcast/podcast/News/rss.xml
    I'm sure I could fiddle with iWEb and get this to work, but why should I? I've already fiddled with it and simple changes to my site structure totally screw this up. Not to mention, that when it did work, it didn' t even post all my podcasts!!! It skipped the first one and the last one.
    And, for those wondering, i'm not technically clueless. I have a podcast working just fine on two other sites. The appeal to iLife with iWeb and the new podcast feature of GarageBand was to bring all this together in one easy to use, nice package. But it's not nice. Garageband's update is awesome! But iWeb and it's attempts to work with the other iApps is gruesome.
    I expect this garbage from Microsoft...not Apple.
    Can anyone recommend a workaround (and yes, I understand I can manually edit HTML...but I was hoping for a workaround within iWeb) to create html links with support for protocols (aside from http and https) ??
    It's bad enough I have to publish to a folder and then FTP to my site since apple makes that exceedingly difficult to do (I'm sure to increase .mac sales) but all this other foolishness is just bunk. I feel ripped off on my iLife '06 purchase.
    Grrrrrrr......
    G5 Dual 2.3 GHz   Mac OS X (10.4.5)  

    I don't know if this helps you any, but in my humble
    opinion Drake is absolutely correct. iWeb really
    wasn't designed for the pro site builder; it's just
    an entry level site builder. Moreover, it isn't
    really geared for the professional world of internet
    marketing; I think it is really more for the home
    and family group who have at least one thing in
    common: Macs.
    I don't think it was even designed for them. I mean, you can't create an ftp: link, you can't manage multiple site files, there's no way to add "aim:" or "yahoo:" links, etc. It's not mac's they're supporting. It's .mac in particular, maybe, if that.
    The art is kinda nice, but really, the grief in trying to do simple things like a basic href is just absurd. I can do these things easily in Pages. iWeb should certainly be no more difficult.
    Btw, I'm here because I have the same problem - overly restrictive URL's on hyperlinks. I'll probably solve my with a trivial sed script. But even that's tough because they mangle the url. It's not easy to find an encoding suitable for automatic post processing.
    Automator anyone?

  • Email providers other than gmail and yahoo?

    We are moving and will be loosing our Comcast.net account. Are there any other internet providers other than gmail and yahoo that are nation wide that I can use firefox and thunderbird with?
    Thanks in advance for your help!

    Microsoft operates Outlook.com, formerly Hotmail. It offers IMAP connectivity so you can mirror your mail into any number of mail programs: http://blogs.office.com/2013/09/12/outlook-com-now-has-imap/
    There are, of course, dozens of companies around the globe that you could use as your free email service, but Google, Microsoft, and Yahoo probably are the "big 3" in this field.

Maybe you are looking for

  • Send an e-mail to Outlook when a PO is released

    Hello colleagues, We need to send an e-mail to some responsible outlook address when a PO is full released, just for information. We don´t want to use workflow for approval. Please, could you tell me how can i customize it? thank you in advance. Best

  • Official queries vs customized ones quick check.

    Hi SAP Gurus, In our SAP BW system, there are huge number of queries, some of them are official ones (created by the IT team),but other are customized by clients from a copy of an official one or completaly crated by them. We wonder if there is a too

  • BlackBerry Media Sync Crashes

    I've been having many problems with BB Media Sync (the most recent version from the BB website).  After the program loaded, I would connect my BB and it would immediately crash and give me an error message.  Two weeks ago, I reinstalled Windows 7 and

  • Blackberry desktop software 6.0 icon issue

    I had successfully installed the Blackberry desktop software 6.0 on my work computer. It was working beautifully, until suddenly a few weeks ago it just stopped working. I uninstalled and reinstalled the desktop software. Yet when I click on the shor

  • Is there an alternate (newer) way to select value 9 from table containing values 1-10 instead of usign MAX?

    I have a table with one column (rowID) and ten rows. The values are the numbers 1 thru 10. I want to select 9. I used the MAX function as follows: create table #tmp1(rowID int) insert into #tmp1 values(1),(2),(3),(4),(5),(6),(7),(8),(9),(10) select M