T60 Max Display Resolution only 1024 X768?

I just got this T60 Model 2008-GG8 with an ATI Mobility Radeon X1300 Video Card.
Can this T60 display a greater resolution than 1024 X 768? I would like to get more desktop real estate, but this seems to be the maximum setting. Does it need a different driver or something? Thanks!

you have the xga screen resolution, so that is the maximum your internal lcd will display, if you get a sxga+ LCD, then it would be more. If you want more resolution try to connect to an external monitor, or swap out the internal LCD (will avoid any remaining warranty on your laptop).
Regards,
Jin Li
May this year, be the year of 'DO'!
I am a volunteer, and not a paid staff of Lenovo or Microsoft

Similar Messages

Any idea for high display resolution in application sharing server ?

Hi.
I installed EP6 SP 13 with KMC and configure collaboration feature.
I tested application sharing and It works.
Then, I found problem.
Problem is that application sharing server doesn't support 1400x1050 display resolution. (only works till 1280x1024)
Is there any idea for solving this issue ?
Regards, Arnold.

Hi Arnold,
I'm afraid this screen resolution is not yet supported. The official supported screen resolution is 1024x768 ! but as you stated it <b>can</b> work wit 1280x1024. You could open an OSS ticket and ask the KM Development for plans on supporting higher resolutions in application sharing and let us also know.
Hope this helps,
Robert

Satellite Pro A30 - 1024 X 768 screen resolution only

My Satellite Pro A30 will only run at a screen resolution of 1024 X 768 can I increase this ? I did not see any options in the display settings or the BIOS

Hi Carl,
I believe that 1024 X 768 is the maximum availavle screen size for your A30. You can, of course reduce this to a smaller value if you wish but you will not be able to increase it.
The value is set in the deisplay properties available from the control panel, or by right clicking on the desktop area and selecting 'properties'. The value is set by the slider in the lower left hand corner of the window.
HTH

24" Imac only showing 2 display resolution options

Within the past week something changed after running a Mac software update that resulted in only having 2 display resolution options. The display choices now are limited to 1900 X 1200 and 960 X 600. I think this happened after having a Mac software update. I don't know what the updates were other then they were suggested as part of the automatic software updates check.
Running OS X Lion version 10.7.4.
Graphics = NVIDIA GeForce 7300 GT 128 MB.
I have rebooted and checked for additional updates put still only seeing 2 choices.
Is anyone else having this problem or ideas why all the other resolution options disappeared?
Thanks

Thanks for quick response. I looked as suggested but those listed are older issues and not recent new events. I guess I will sit back and see if there is a new update coming that fixes issue. Really madding not being able to re-set resolution to one that I have been using for years.
If anyone else knows background/input on why resolution options would go from at least if not more then 10 to now only having 2 would be great.
Thanks again.

Leopard "Forgets" External Display Resolution

I have a 17" MacBook Pro C2D (Oct 2006 revision) that I use at work with an external display (Dell E197FP) that is connected to the laptop via the DVI-to-VGA adaptor. The Dell has a native display resolution of 1280*1024 @60Hz and this is set via the System Preference's Display panel. The problem is that quite often when I connect the display in the morning OS X (10.5.6, at present) "forgets" the resolution that has been set and reverts back to its default for the display, which is 1152*864 @75Hz. It is baffling to me that it keeps forgetting the selected resolution for the display, despite recognising it, and that it selects such an odd resolution as a default. This happens about once per week at the moment.
Does anyone have an idea what is causing this and how I can stop OS X from being so forgetful?

Are you getting one to extend your desktop? I don't, I use my MacBook with the screen off using my external only with a keyboard and mouse plugged in. I run my Late 2008 2.1GHz MacBook with a GMA X3100 using a 23" Samsung wide ratio no problem in 1680x1050. It is high resolution. Make sure you click "mirror" in Display Prefs. Be certain that you don't simply boot to both because the external will appear grainy and only be putting out the native 1280 X 800 13" MacBook resolution on the new big LCD. There are many different ways to achieve this. With the LCD on and hooked to the MacBook, turn the MacBook on then quickly close lid after the chime. Give it some time. After it boots to the external, I open the lid to provide proper airflow, some may argue it's not needed.

Highest dual display resolution for mac mini mid 2011

I am currently running a mac mini mid 2011. As I've understood (according to the below statement). Am I only able to use 2 secreen with 1920x1200 or could I use one screen with 2560x1600 and one with 1920x1200. I do NOT want mirroring, only dual displays.
I am going to connect the screens in the following way:
1x mini-dvi - HDMI to one screen.
1x HDMI - HDMI to the other screen.
Display Support:
Dual Displays
Resolution Support:
1920x1200*
Details:
*This model simultaneously supports 1920x1200 on an HDMI display or a DVI display using the included HDMI-to-DVI adapterand 2560x1600 on a Thunderbolt or Mini DisplayPort display or even a VGA display (with an optional Mini DisplayPort-to-VGA adapter, which is compatible with the Thunderbolt port).
2nd Display Support:
Dual/Mirroring*
2nd Max. Resolution:
2560x1600*
Details:
*This model simultaneously supports 1920x1200 on an HDMI or a DVI display (using the included HDMI-to-DVI adapter) and2560x1600 on a Thunderbolt or Mini DisplayPort display or even a VGA display (with an optional Mini DisplayPort-to-VGA adapter, which is compatible with the Thunderbolt port).
Thanks in advance
Rich

According to the copy&paste from wikipedia, HDMI should support higher resolution than 1920x1200. So the question is, does it aupport that on the mid 2011 mac mini. It says in the specifications
"Mac mini is designed to work with HDMI devices that comply with versions 1.0, 1.1, 1.2, 1.2a, 1.3, 1.3a, and 1.4 of the HDMI specification."
That should mean it should be able to support it, but I don't know : <
HDMI version
1.0
1.1
1.2
1.3
1.4
2.0
Date initially released
December 9, 2002
May 20, 2004
August 8, 2005
June 22, 2006
May 28, 2009
September 12, 2013
Maximum clock rate (MHz)
165
165
165
340
340[109]
600
Maximum TMDS throughput per channel (Gbit/s) including 8b/10b overhead
1.65
1.65
1.65
3.40
3.40
6
Maximum total TMDS throughput (Gbit/s) including 8b/10b overhead
4.95
4.95
4.95
10.2
10.2
18
Maximum throughput (Gbit/s) with 8b/10b overhead removed
3.96
3.96
3.96
8.16
8.16
14.4
Maximum audio throughput (Mbit/s)
36.86
36.86
36.86
36.86
36.86
Maximum color depth (bit/px)
24
24
24
48[a]
48
Maximum resolution over single link at 24-bit/px[b]
1920×1200p60
1920×1200p60
1920×1200p60
2560×1600p75
4096×2160p24
4096×2160p60
Maximum resolution over single link at 30-bit/px[c]
N/A
N/A
N/A
2560×1600p60
4096×2160p24
Maximum resolution over single link at 36-bit/px[d]
N/A
N/A
N/A
1920×1200p75
4096×2160p24
Maximum resolution over single link at 48-bit/px[e]
N/A
N/A
N/A
1920×1200p60
1920×1200p60
Maximum 3D resolution (using a full resolution 3D format) over single link at 24-bit/px
N/A
N/A
N/A
N/A
1920×1200p60

Display resolution changes during sleep

This does not look quite like anything I've seen here already. Mid-2010 Mac Mini, OS X 10.9.2, Acer V173 monitor with 1280 x 1024 maximum resolution, connected via Apple Mini DisplayPort to VGA adapter (because the monitor has only a VGA input). Resolution is set at 1280 x 1024. I have Display Menu installed and the icon sits at the top in the menu bar.
Display goes to sleep when there is no user activity for a few minutes (because although the display doesn't use much power it's still against my nature to waste any). I wake it up by hitting a non-printing key such as control, option, command, or all three together. Often as not, the display wakes up in a lower resolution. I can usually restore it to 1280 x 1024 by using Display Menu, but then I also have to resize some of the windows that have been shrunk by the lower resolution.
I don't want the display resolution to change. I tried resetting NVRAM and repairing file permissions, no help.
Why does the display resolution change without my knowledge and consent? More to the point, how can I keep it from doing that?

Another helpful hint, again I forget where on this discussion board I saw it, is that holding down the Option key while hitting the Scaled button in Display Preferences gives a wider choice of resolutions. Ordinarily the only resolution option is 1280x1024, but the Option key brings up others, including 1280x960.
On the theory that Apple doesn't like the 5:4 aspect ratio of the native 1280x1024 resolution of the monitor, I set the monitor resolution to 1280x960 yesterday (June 23). There's a little distortion from using a 4:3 aspect ratio on a physically 5:4 monitor, but if two weeks go by (July 7) without the resolution going bad, I will try a new (or used) monitor.
The next question is, would Apple dislike a wide screen aspect ratio? If it likes 16:9, would it dislike 16:10? With my hardware and OS, and a 1080p HDTV/monitor connected with an HDMI cable, would the resolution stay put?

Internal vs. External Display Resolution

Hi,
I just purchased a KVM switch by IO Gear Model GCS1782. Hooked up my Mac Book Pro 15 inch 2.16 Ghz with DVI Dual Link and Mac Mini Power PC with DVI single link.
The KVM is working perfectly. The Mac Mini Display resolution is 1680x1050 as normal. The MBP Color LCD is 1440x900 as normal.
Question: Why does the display on the internal display of the MBP look crisper than the Cinema Display? The CD looks like a lo res VGA monitor.

Okay everybody...something funny happened this morning.
Last night I put my MBP to sleep by using "Insomnia" and woke it up this morning and to my surprise, the resolution is matched. No more fuzziness. I have the display icon on the title bar which shows the only one display, only the ACD at 1680x1050. Yesterday it showed two displays because I was mirroring.
Yesterday morning I hooked up a new KVM (I/O Gear Model GCS1782) and discovered video display problems (not from the KVM). From 10:30 AM to 2:45 PM I called IO Gear support, Apple Sale Support (x2), Apple Technical Support (x2), and continuously scoured these forum reading and posting.
Yesterday:
1. Could not close lid of MBP because ACD would go black. (Solution: Insomnia)
2. Could not get MBP LCD display be crisp on the external ACD (Solution: Insomnia)
3. Mirrored the MBP causing the ACD to use a lower resolution (Solution: Insomnia)
Today, all is well.
I think it had to do with the MBP sleep mode or ????. I am not positive on what exactly happened to get the max resolution. I am just a wee bit concerned that it will happen again because I have to disconnect the MBP tomorrow and reconnect without the confidence I can get it to work. One thing for sure, I won't mirror any longer.
Lessons Learned:
1. No one person is proficient with using external displays on MBP. The pieces of information that I needed were either scattered and fragmented or just not available.
2. The people at Apple is nice, helpful, and well meaning. But this particular situation revealed a lack of technical cohesion in its communication.
I want to thank all the good people who help me along this journey.

Max screen resolution LCD Satellite pro M10

hi, sorry for my poor english, my question is:
The max internal LCD resolution for the satellite pro M10 notebook is 1024x768? excluse te superior resolution with scrolling?
I Have read in the tecnical specific of my notebook that the internal max resolution is 1280x1024 is not really?
thanks

Hi
As far as I know the display resolution depends on a display controller
I found this information in the user manual. The following models are available:
-14.1 XGA with 1024 x 768
-15.0 XGA with 1024 x 768
-15.0 SXGA+ with 1400 x 1050
-15.0 UXGA with 1600 x 1200
I think in this case your unit has a 14.1 or a 15.0 XGA display controller. Well, in my opinion its all right with your notebook. Enjoy it :)
Bye

Display resolution on netbook not compatible with BB Desktop manager requirement

BB Bold 9700
Device updated today 1/31 Should be a warning that this process takes a l o n g time
BB Desktop Software Rev 5.01
Upgraded from Bold 9000 and backed up device using BB Desktop Software
Can't restore photos from old BB to new BB using media manager because the netbook I use has a max resolution of 1024 x 600 and the media manager SW requires 1024x768 resolution. (Why does it care?)
Any suggestions on how to make it work?

lateralus wrote:
stingray wrote:
Misfit138 wrote:IIRC, the SiS driver is quite limited, and only offers 2d.
Thats what I expected to hear...
Are you 100% sure? I just run glxinfo and it says:
direct rendering: Yes
And I'm confused. Are there any chances of getting compositing to work on SiS card in this case?
I'm not the expert here, but compiz can work with indirect rendering, so I don't think that's the qualifier for if it works for your system.

Impossible to set display resolution on video projector - nvidia 6600

Hi,
I have an Infocus LitePro730 projector. Under Tiger, when I connected it to the secondary video port of my G5 (nvidia GeForce 6600), it would get somewhat correctly detected (the Monitor pref pane would give me a vast choice of screen resolutions from which I could pick the max one (1024x768) that my projector can handle.
Since I upgraded to Leopard, this no longer works. When I plug in the projector, the only resolution choice I get is a lame 640x480. I tried pretty much everything (plug on the other port, re-detect monitors, cold boot with the projector plugged in, reset the PRAM, etc), none would do.
Then I tried to plug the projector on my PBook G4 (ATI Radeon Mobility 9700) which is also running Leopard, and there I got what I expected: a huge list of screen resolutions from which I could pick the right one.
I'm using a DVI-VGA converter to plug the projector as it only does VGA (no DVI input). Is this a known bug with nvidia drivers in Leopard? Is there anything I can do to override what Leopard thinks is the max supported resolution on this "display" so that I can properly use my projector again?

I have the same problem with a pair of LG LCD displays. It does not appear to be limited to your projector.

Macbook mini-dvi to vga display resolution issue

Hi,
I'm connecting my 13in first generation macbook to an external LCD display. It's an ACER AL2216W. I'm running latest Snow Leopard.
I could always just click 'detect displays' and it would figure out what kind of monitor I had and I would be off and running at the native 1600x1050.
Now for some reason when I click detect displays, it only shows the laptop native resolutions. There is no 1600x1050 in the resolution list and instead of saying "ACER AL2216W" at the top of the display preferences, it just says "Display"
I've tried rebooting, plugging in and and out my monitor cable to the macbook and a variety of other things but to no avail. I'm forced to use 1024x768 right as it is the only resolution that displays correctly on my monitor.   Any ideas on how to get back the detect display working and have 1600x1050 resolution again?

I have a 40 lcd tv and have my macbook hookuped to it using the mini display port to vga and it looks really good, but i only use it for watching movies. Dedicated monitors are still better for reading text or playing games

How to change external display resolution WITHOUT clicking "CONFIRM"?

I have a somewhat unusual situation. My MacBook laptop is actually now a ModBook (a pen-tablet computer), and as such I no longer have a trackpad attached to it. All of my inputs are via the stylus, tapping directly on the built-in display.
This works perfectly fine, except when I need to give presentations on an LCD projector (which is quite often lately). I like to use the projector as an external monitor, so that I can run the Keynote presentation on it while using my laptop screen as the presenter's display, with the upcoming slide, etc. If the projector doesn't give me an ideal native display option (sometimes, the aspect ratio for the 3 or 4 resolutions available in the Displays drop-down in the menubar turn out to be stretched or squeezed), then I, naturally, have to open the Display System Preferences and try out different resolutions.
The problem is, since my stylus only interacts by clicking directly on the built-in-display, I have no way of moving the cursor over to the external display when the dialog box with the "Click here to confirm change/You have 15 seconds..." message appears. So I can never click it ... so I can never confirm the new settings.
The workarounds I've used so far are:
- Mirror displays (not ideal, as I need the presenter preview of the next slide)
- borrow a mouse from someone (usually from a Windows desktop, frankly) and plug that in to briefly mouse over and click the confirm button
I'd love to find a software workaround that allows me to NOT mirror displays and also doesn't require me to carry around a mouse all the time (my laptop bag is already overstuffed...).
Thanks.

Fateh wrote:
I hope that my question is clear ... Nope.
How to change the display resolution of APEX ??APEX doesn't have a display resolution. "Display resolution" is an attribute of the device and user agent software used to view the APEX page.
What do you mean by "the display resolution of APEX"?
In other word, if an end user sees large elements on a pageWhat "large elements"?
then he/she zooms it outHow?
"Zooms" what—the entire page or a single "large element"?
How can I set a proper ZOOM for my app by default ...Meaning what?
And as usual, we're missing:
<li>Full APEX version
<li>Full DB/version/edition/host OS
<li>Web server architecture (EPG, OHS or APEX listener/host OS)
<li>Browser(s) and version(s) used
<li>Theme
<li>Template(s)
<li>Region/item type(s)
You've been posting here for years. You know this basic information is necessary to understand and reproduce problems.
If you're looking for help it doesn't seem unreasonable that you make the effort to provide a full, clear but concise description of the problem or requirement.

Thinkpad Yoga - Insufficient external display resolution over the Onelink

My local Lenovo Partner just confirmed the data in "User Guide" of the TPYoga, that the external screen resolution will only be 1920x1200.
"User Guide" Page 10, http://www.lenovo.com/shop/americas/content/user_guides/tpyoga_ug_en.pdf
"Display resolution:
– LCD: 1366-by-768 or 1920-by-1080, depending on the model
– External monitor: up to 1920-by-1200, depending on the monitor model"
I mean what do I want the OneLink Dock / OneLink PRO Dock for??
Of cause to connect a large screen and this not with a worse ppi than the intern display. So I need at least 2560x1600
(we don’t even talk about all the disadvantages of a 16:9 screen, cause that’s off topic).
Idealy I expect of cause a 4k resolution possibility together with the OneLink Pro Dock and multi stream (daisy chain) possibility at the display port.
But 1920x1200 external graphic output can’t be meant serious for a 2000US$ device??

Ok, let’s accept that the new Thinkpad YOGA Manual includes misinformation.
Actually I’m sitting in front of my 2048x1152 Display which is connected to my 8 years old Asus Notebook via DVI. Does this old jalopy perform a higher resolution via DVI than the Thinkpad Yoga via “OneLink PRO Dock-DVI” does?
http://download.lenovo.com/ibmdl/pub/pc/pccbbs/options/tp_onelink_pro_dock_ug_en.pdf
Page 13
(I’m guessing in the first line (behind "One monitor") it’s supposed to mean DVI instead of DP”
(1) Lenovo, are these technical details of the NEW OneLink Pro Dock also wrong like the Manual of the Yoga regarding the maximum resolution?
Would be very helpful for me to plan with correct information..
(2) And is it definitely true that I can't connect two displays at the OneLink PRO Dock with a higher resolution than 1920x1200??
That would mean I send the Thinkpad Yoga back and better stay with my 8 years old ASUS jalopy.. smileyfrustrated:

External display resolution

I have Dell up2414q monitor which is capable of displaying up to 3840 x 2160. But when I connect my 11-inch Macbook Air (the latest 2014 model), which is capable of 2560 x 1600, shows only 1920 x 1080. This is the highest resolution listed in display setting.
I'm using Display Port cable and enabled Display Port 1.2 setting on the monitor. I went to Apple Store and asked, but they had no idea what was wrong. My OS is 10.9.3.

Hi there gen2014,
You may find the information in the article below helpful.
OS X Mavericks: Adjust your display resolution
http://support.apple.com/kb/PH14388
You can connect a second display and adjust its resolution. Once it’s connected, click Scaled, then select a resolution. Press the Option key while you click Scaled to see additional resolutions for the second display.
If you continue to experience issues, take a look at the troubleshooting steps in the article below.
Apple computers: Troubleshooting issues with video on internal or external displays
http://support.apple.com/kb/ht1573
-Griff W.

T60 Max Display Resolution only 1024 X768?

Similar Messages

Maybe you are looking for