T60 power gauge problem

Dear all,
I use a T60 and there's a problem from last morning.
The battery status in taskbar turned to white icon and with a short thin line in it when I powered on the laptop yesterday. When I move mouse cursor onto the icon the message "battries not installed" prompted. I've tried installing all power management related updates via System Update in Thinkadvantage but the problem still exists. Could you please give some advice on how to deal with the situation? Thank you in advance!

Count me in on this issue, exactly the same symptoms!
my configuration is 2767-1RG, T400 w/ 4Cell Bat, Vista x64 Ultimate, 4GB DDR3.
Power Manager Version is 2.36
We NEED this fixed. I can't have my laptop run down to 3% Battery with the Battery indicator showing 36% !
--EDIT--
ok, I'm beginning to think this forum software either hates me or has an issue with Opera. Mod: please merge this with thread http://forums.lenovo.com/lnv/board/message?board.id=T_Series_Thinkpads&thread.id=19023 where it should have gone in the first place. Sorry for the inconvenience...
Message Edited by alexb2283 on 11-29-2008 02:35 AM

Similar Messages

New Power Gauge Problem

Hello,
I have a T61p and Vista x64. I've had this setup ever since I purchased the unit back in October of last year.
When I recently updated to the new Power Management software the power gauge sticks on its certain percentage and doesn't update. Even when I disable it and re-enable it the gauge remains inaccurate. When I start the Power Management software it does report the current percentage remaining. The Vista taskbar icon is also reporting the correct read-out.
This problem seems to occur when I put the computer into sleep and wake it up.
Since this hasn't happened until I updated the software I suspect it's a software problem.
Has anyone else ran into this?

Count me in on this issue, exactly the same symptoms!
my configuration is 2767-1RG, T400 w/ 4Cell Bat, Vista x64 Ultimate, 4GB DDR3.
Power Manager Version is 2.36
We NEED this fixed. I can't have my laptop run down to 3% Battery with the Battery indicator showing 36% !
--EDIT--
ok, I'm beginning to think this forum software either hates me or has an issue with Opera. Mod: please merge this with thread http://forums.lenovo.com/lnv/board/message?board.id=T_Series_Thinkpads&thread.id=19023 where it should have gone in the first place. Sorry for the inconvenience...
Message Edited by alexb2283 on 11-29-2008 02:35 AM

Icon tray issue, maybe related to power gauge

Dear Community,
I have a 1 month old ThinkPad L540 with Windows 7 Pro SP 1 with Power Manager 6.64.4.
My icon tray is not shown correct, it seems that a part of the tray is shown twice, see the image below:
I tried disabling the power gauge (which i actually do not want), which did not solve the problem. Then it copied the first part of the standard icon tray. It does seem that it is related to power manager, however. But I am not sure about that. The copied part of the icon tray is unresponsive.
If i for some reason unlock the taskbar and tries to resize the icon tray area, it only gets worse. If I make it bigger, it just copies the icon tray again and again.
Any ideas? fixes? It's only aesthetic, but it annoys me like crazy!

Hi Vkgundersen,
Welcome to Lenovo Community!
We understood that your query is about battery charging indication on ThinkPad L540.
Regarding this issue right click on taskbar and go to Toolbars and un-tick Power Manager, and proceed the same step to tick it, check if the issue still persist.
Please check the below snapshot to perform it.
Spoiler (Highlight to read)
Hope this helps.
Best regards,
Hemanth Kumar
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Power management problems

A couple of weeks ago I installed quite a few of the patches in the recommended list.
Since then, I get the following message repeated continually in the console window:
DPMSSet: Invalid argument
Power management problems
I'm runnig solaris 8 on a ultra 5. I looked in the power.config file and in the startup scripts, but couldn't find any reference to "DPMSSet." Any ideas on the cause and solution of the message?
I never use the powerd daemon, so killing the process seems to eliminate the messages.
Thanks,
Gerhard Kuhn
[email protected]

Hi,
Check whether all the supported patches are installed.
Regards,
Dharani
SlashSupport
A couple of weeks ago I installed quite a few of the
patches in the recommended list.
Since then, I get the following message repeated
continually in the console window:
DPMSSet: Invalid argument
Power management problems
I'm runnig solaris 8 on a ultra 5. I looked in the
power.config file and in the startup scripts, but
couldn't find any reference to "DPMSSet." Any ideas on
the cause and solution of the message?
I never use the powerd daemon, so killing the process
seems to eliminate the messages.
Thanks,
Gerhard Kuhn
[email protected]

Hi, I'm having a macbook pro here and it spoiled after a year of using, i though it was the power adapter problem because when i try to charge my mac battery that is depleted it shows a very dim light and my mac won't start up

Hi, I'm a macbook pro user but recently my macbook just spoiled, i though was my power adapter problem because when i charge my mac battery that is depleted, it shows a very dim light and my mac just won't start up, even i bought a brand new 80 euro power adapter it still give out the same result.

when I switch it on, the little led light it up and u can hear the fun running and after 5 to 10 seconds switched off again / ive got all my recordings in there
Try Resetting your Mac's PRAM and NVRAM
If that doesn't help, try Resetting the System Management Controller (SMC)
in really disappointed with apple,
Serge... you are aware that you are responsible for backing up your importanta data correct ?

Power supply problem a little better after unplugging imac for 24 hours

Hello,
I'm currently having power supply problems (at least I hope it's the power supply and not the mother board), similar to many others I've seen on these boards. What I've noticed is that if I unplug my iMac for about 24 hours I can get it to run again for a little while. Unplugging it for a few minutes (or even 8 hours) doesn't seem to help. My iMac won't get much further than the starting chime before it loses power. But it seems to me that unplugging it for 24 hours has gotten me between 5 days to 5 hours of use before I unexpectedly lose power.
Is there anything to account for this or am I just imagining things? Ultimately, I don't think the answer will help me much, but I am curious to know. I'm taking my iMac to a Mac Genius tomorrow to see if they can help diagnose the problem. I saw a little hit in my video today, which was a first, so I suspect the problem may be getting worse. I'll probably be buying a new power supply soon.

I'm having the same problem. They say to restart you have to unplug the power, wait 10 seconds and then plug it back in but apparently it's not enough. I have to unplug for about 30 seconds, plug back in, and wait anywhere from 30 minutes to several hours before it'll start up again properly. The last time I had this issue was in october '06- when I had a new logic board and power supply put in. Now I'm worried because my applecare is expired by about 3 months. I bought the computer in feb. '05. I hope a new board doesn't cost more than what the computer itself is worth but I'm afraid that'll be the case...

I have power ic problem in my iphone 4s. please tel me the solution

i have power ic problem in my iphone 4s. please tel me the solution. thank you

The chargers for the 3GS and 4S are the same. That's not your problem, unless they are both defective.
Plug it in to mains power for at least 15 minutes. If it doesn't automatically come on, try a Reset... press the home and sleep/lock buttons until you see the Apple logo, ignoring the slider. Takes about 5-15 secs of button holding and you won't lose any data or settings.

Power up problems on my HP 7520 all in one printer

My HP 7520 e powered down whilst in the process of printing. when the power pack is disconnected from the printer and powered back up from the mains supply a green light shows on the actual power pack. when the power pack is connected to the printer the power fails immediately.

Hi , Welcome to the HP Forums! I noticed that you are having power up problems on your HP 7520 all in one printer. I am happy to look into this for you! Please try the steps within this guide, The HP Printer Does Not Turn On or Respond When the Power Button is Pressed. As it deals with power related issues. (Even though the guide title may not match your issue, I believe the solutions will help.) Hope this helps! “Please click the Thumbs up icon below to thank me for responding.”

G750 power button problem

Hi guys,
So the problem with my laptop is that when I press the power button, the power button itself and the two leftmost lights below the touchpad- power and battery- they light up for a second or two. But the laptop doesn't start up and the lights go off. If I long press the power button, the laptop starts, though.
Now this is not a severe problem as of now, I know. But I'm pretty sure this will escalate into something else. Does anyone know what the problem actually is and what I can do to solve it?
P.S.: Unlike people with power button problems, I didn't do anything with the hardware or software.

Hi Sanjana,
Welcome to Lenovo Community!
I’m sorry to hear that the Power button is not working as expected in your G750 Laptop. I would suggest you to perform the Flee-Power, below are the steps to perform the same:
Remove the battery and any other peripheral device connected to the computer.
Hold the power button for 10-15 seconds and then connect only the AC Adapter and try to turn ON the computer.
If the issue persists even after performing Flee-Power, I would suggest you to contact our Technical Support for further Assistance to get the details of the nearest Authorized Service Center to get the issue analyzed.
Click here to open a link where you can select the country and get the exact contact support number. I’m sure they will be a great help.
Do post us back for further queries.
Best Regards
Shiva Kumar
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Power Button Problem NO MORE HP!!!

Tried everything to fix my power button, but no way,NO MORE HP.
Today, one of my friends also had power button problem, even his laptop was one of the newest model.

Model?

10.4.10 power update problems

A friend of mine experienced some computer problems after downloading the latest 10.4.10 power update, mostly USB failures. When I recieved the update message I didn't download because I wanted to check to see if other people had any problems. To my surprise I discovered from going to the iMAC disccussion forum that many people were having all sorts of terrible problems. Some people had no negative experiences but many did and they weren't just USB glitches.
Has anyone here had problems after downloading the update or heard of this situation? Google "10.4.10 power update problems MAC".

Hi, Mike.
You might want to search or post on the "Microsoft Messenger for Mac" group you can find on the Microsoft Mac Support - Newsgroups page. These are Google Groups with active participation from MS Microsoft Messenger for Mac users, including a variety of expert users.
I don't mean to send you somewhere else, but I've found numerous answers there for folks with questions related to MS products. Accordingly, it has often proved to be the first, best place to look for answers to questions such as you are asking.
Good luck!
Dr. Smoke
Author: Troubleshooting Mac® OS X

KT4 Ultra APCI power management problems

After I boot I must go into Win98 power management propertys and apply to get any power management functions to work. And then all I can get is monitor blank and hardrive power down. Unit will not go into suspend.
If I use the suspend feature in power down the unit will go into suspend (Susp to ram) but all the fans keep running. When I come out of suspend, the system becomes unstable and quirky.
Can anyone help me get this running the way it should.
Joel Gunn
Kt4 Ultra V 1.0 Bios V 1.4 - AMD 2100 XP
Win98 Se
Nanya 256M - 333 Ram X2
Ati Radeon 7500 AIW
Enemax EG 365P -VE
Two Maxtor 80Gig Ata 133, 7200 on a Promise TX2 Ultra 133 controller.
Aopen Modem
CD rom and CDR/RW

Hi,
Check whether all the supported patches are installed.
Regards,
Dharani
SlashSupport
A couple of weeks ago I installed quite a few of the
patches in the recommended list.
Since then, I get the following message repeated
continually in the console window:
DPMSSet: Invalid argument
Power management problems
I'm runnig solaris 8 on a ultra 5. I looked in the
power.config file and in the startup scripts, but
couldn't find any reference to "DPMSSet." Any ideas on
the cause and solution of the message?
I never use the powerd daemon, so killing the process
seems to eliminate the messages.
Thanks,
Gerhard Kuhn
[email protected]

MOVED: K7N2 Delta Upgrade Power Off Problems

This topic has been moved to AMD SocketA based board.
K7N2 Delta Upgrade Power Off Problems

Thanks for the various suggestions. I can confirm:
- 4 pin cpu power plug connected
- front bus frequency changed to 200MHz, processor now recognised correctly as Athlon xp3200+
- I have been assured the cpu has not been overclocked
However power off problem persists. System shuts down after approx 1 minute whether i am in BIOS or start initiaiting xp repair from CD. As the system shuts down after such a short time the xp repair will not complete. The system wil not power on again until at least 15mins has elapsed then promptly powers off again.
I have fitted the D-bracker diagnostic tool and this shows 'operating system booting', ie four green lights.
I note from the motherboard maunal that a cpu thermal protection system is installed for the Athlon cpu platform. If the mechanism senses an abnormal temperature rise it automatically shuts down the system. As noted in my original post the system is powering off with the cpu temp at <40 deg C. The cpu warning temp in the BIOS PC health check stsus facility is set at 60 deg C so do not think this is the issue?
System details:
MSI K7 N2 delta (MS-6570)
Athlon xp 3200+ (AXDA3200DKV-4E)
Corsair twinX 1024-3200C2 DDR-DIM 1024 MB
Seagate ST340016A 40MB HDD
Pioneer DVD Rom
Generic CRD - BP1500P CD
1.4MB mitsumi FDD
Thermal take TR2 470W psu
Coolermaster xdreamII socket A cpu fan
Gigabyte geforce 6600GT turbo video
soundblaster live 5.1
Anyone any further thoughts?

IMac 600 SE - strange power/video problems - need motherboard?

Hello all,
Got this "project" iMac, have no knowledge of its history. Here's what's going on:
When I first got it, it would take 3 or 4 tries for it to fully boot up, on the first try it would shut off after a second or two, the next try it would get a little further along before shutting down and finally on the 3rd or 4th try, it would boot up completely.
Initially, it had a dim display and a bunch of wavy horizontal lines, like a TV with bad reception using a "rabbit ears" antenna. The person I got it from said from what he had learned, he thought it was a power supply problem.
So I replaced the down converter/power supply with a spare one I had leftover from a previous motherboard replacement, which made no difference at all, same problems.
So I then checked the firmware, which was the latest version (4.1.9). Then I did a PRAM reset, which helped, followed by a PMU reset. I did the PRAM reset several times when problems cropped again, and have done the PMU reset twice, resetting the clock both times.
The shutdowns on boot up have disappeared, but it will occasionally shut down out of the blue after being on for awhile now. The horizontal lines have disappeared, but it now has a strange video problem:
The geometry of the screen is off-kilter by default, so when I go into System Properties to reset the geometry there, and I use the "Rotate" command to correct the overall incline in the display from right to left, the display gets dimmer, and sometimes the horizontal lines reappear, usually on the right side of the screen. When I click on "Factory Defaults", the display gradually brightens again, and if horizontal lines are present, they disappear. This phenomenon doesn't appear to occur when I adjust the display height and position, only with the "Rotate" command, rotating it counter-clockwise. I believe the iMac even shut down once when I was doing this.
I have also noticed an occasional higher-pitched "whine" on boot up, which usually results in an eventual shut down.
So, are these problems symptomatic of a bad motherboard or a bad video board/card? Since I have the latest firmware and have tried both PRAM and PMU resets, and the occasional random shut down still occurs, it makes me think it's a hardware problem.
I just need some feedback here before I purchase a replacement motherboard.
Also, can the video board/card be replaced separately?
Thanks for any ideas/suggestions/help!
iMac 600 SE Mac OS X (10.4.3) 600MHz, 384MB RAM, 40G HD
iMac 600 SE Mac OS X (10.4.3) 600MHz PowerPC, 384MB RAM, 40G HD

flaash...
In your situation I believe 2 components need checked first. PAV board and the CRT. Or essentially anything shared by the 2 items, such as the CRT yoke/gun board.
As far as the logic board goes, the video chip-set is part of it (soldered in) and not repairable. Those parts rarely "weaken" (normally just die) so I would be less likely to suspect them.
...Ron

[PT880-Neo LSR]Power supply problem

Hello,
We've installed the new motherboard today, it model is PT880 Neo LSR. Well we've got everything plugged in, but when we try to turn on our computer it doesn't turn on.
There is a case switch, but when turn on, the fans work for like 1 second then it stop.
I've tried the Troubleshooting guide on the website, and studying the Manual, but I could not find a way to fix this.
Can anyone help us fix this power supply problem please?
Thanks

Quote
Originally posted by DarkDuelist
yea, it comes with the 4-pin atx1 connector and 20-pin atx2 connector.
But i just exchanged another mainboard, and still not work. the first time i test it, i only plug the 4-pin and 20-pin connector into the mainboard and it worked. i thought the problem was solved. so i put everything else in (cpu, hdd, cd-rom, dvd-rom...) then test it again. I only heard a sound psssst, and nothing run. I tested it many time and it still not work. Then I UNPLUG the 4-pin connector from the power supply to the mainboard, and test again, this time, only all the fan RUN except the the fan in the power supply DID NOT run. Is it because that the power supply got problem? I used another power supply 420w to test but nothing run either.
MATSONIC motherboard MS9087C
DDR 400
Intel celeron 2gh 400 fsb
Macron 350w power supply
The psssst sound----sounds like something shorted out. Pull everything out and put it back in with a different PSU.
Don't put a hard drive or floppy in-----just CPU, RAM mobo, vid card, fans, PSU-----see if it will post.

T60 power gauge problem

Similar Messages

Maybe you are looking for