T60 shutdown when connect to the docking
Hello,
I have several T60 in my company,
3 of the T60 (one is T61) shutdown when connecting to the mini docking.
This is new.
I have the most BIOS and driver updated.
Also I know this http://www-307.ibm.com/pc/support/site.wss/document.do?sitestyle=lenovo&lndocid=MIGR-67382
and I already have that
Hi,
Can you please check your RDS configuration from Windows->Preferences->RDS Configuration?
Please send a snapshot of your RDS configuration and attach your web.xml for us to investigate
Thanks,
Balaji
Similar Messages
-
ipod shuffle 4 connecting problem
When you say "dock," is that the USB cable it came with? I'm asking, because it just has a headphones plug connector, not a "dock" (like the 2nd gen shuffle).
As a test, shut down (power off) your computer and disconnect all USB devices including hub, except for standard keyboard and mouse, if normally used. Do this to reset the shuffle
http://support.apple.com/kb/HT1655
If your computer is a laptop, connect it to its power adapter (so that it's not running on battery power). Start it up, run iTunes, and connect the shuffle using its original USB cable to a direct USB port on the computer. -
IPod only charges when connect to the Mac
My iPod will only charge when connected to the Mac. It will not charge on any other cable or docking station. And, yes, I have tested the various cables and docking stations with other devices and the issue is clearly only with this one device. I am note sure what generation the device is, but it is old enough that it cannot run iOS 7. It is on iOS 6.1.5.
ThanksThen it seems that the other sources do not work satisfactorily. Do the other charging sources charge other devices?
-
How many hours needed to charge the new iPad when connected to the wall outlet.
How many hours needed to charge the new iPad wifi 16 gb?
Yesterday it was my first time to charge and it takes around 8 hours (it was not on wifi& not on working any application)
when connected to the wall power outlet using the supplied charger,dock and the USB wire.
I,ll be waiting for urs reply.The quickest way (and really the only way) to charge your iPad is with the included 10W USB Power Adapter. iPad will also charge, although more slowly, when attached to a computer with a high-power USB port (many recent Mac computers) or with an iPhone Power Adapter (5W). When attached to a computer via a standard USB port (most PCs or older Mac computers) iPad will charge very slowly (but iPad indicates not charging). Make sure your computer is on while charging iPad via USB. If iPad is connected to a computer that’s turned off or is in sleep or standby mode, the iPad battery will continue to drain.
Apple recommends that once a month you let the iPad fully discharge & then recharge to 100%.
At this link http://www.tomshardware.com/reviews/galaxy-tab-android-tablet,3014-11.html , tests show that the iPad 2 battery (25 watt-hours) will charge to 90% in 3 hours 1 minute. It will charge to 100% in 4 hours 2 minutes. The new iPad has a larger capacity battery (42 watt-hours), so using the 10W charger will obviously take longer. If you are using your iPad while charging, it will take even longer. It's best to turn your new iPad OFF and charge over night. Also look at The iPad's charging challenge explained http://www.macworld.com/article/1150356/ipadcharging.html
Also, if you have a 3rd generation iPad, look at
Apple: iPad Battery Nothing to Get Charged Up About
http://allthingsd.com/20120327/apple-ipad-battery-nothing-to-get-charged-up-abou t/
Apple Explains New iPad's Continued Charging Beyond 100% Battery Level
http://www.macrumors.com/2012/03/27/apple-explains-new-ipads-continued-charging- beyond-100-battery-level/
New iPad Takes Much Longer to Charge Than iPad 2
http://www.iphonehacks.com/2012/03/new-ipad-takes-much-longer-to-charge-than-ipa d-2.html
Cheers, Tom -
Hi all, I'm trying to connect my macbook pro to Sony Bravia tv using Kanex Mini DisplayPort to HDMI Cable with Audio Support , when connected to the HDMI on tv I get a picture of the mac screen saver ( the starburst ) no video/audio,any ideas? thanks, Derek
Dave I'm glad to say that it works perfectly but I'm embarrassed to say that my 12 year old nephew hooked it up in about 10 minutes.
If you have the Kanex Mini DisplayPort cable it will work, what confused me was changing the display settings in System Preferences,
and dragging the mac screen from the mac onto the tv. Sorry I cant be more helpful but you have the right cable now you need a 12 year old nephew.
Good luck Derek -
My iTunes and Laptop doesnt detect my iPhone, But it is charging when connected to the Laptop?
Try troubleshooting steps mentioned here: http://support.apple.com/kb/TS1538
-
ITunes crashing when connecting to the store on Windows 8.1
Hello,
I had iTunes crashing when connecting to the iTunes Store with an Apple ID. I tried unsucessfully all the solutions posted on the many threads of people having the same issue. So I decided to reinstall Windows. A clean Windows 8.1 install from the Microsoft DVD. And guess what, it is still crashing! How can this even be possible?
The problem:
- iTunes crashes when connecting to the store with an Apple ID. It connects, briefly freezes, then crashes.
- I can access the store without an Apple ID without crashes. But it crashes as soon as I connect with an Apple ID.
The system:
- A clean, fully updated, Windows 8.1 Pro w/ WMC install from the Microsoft DVD.
- Applications I installed, along with iTunes: Adobe Reader, Google Chrome, Skype, Office 2013. Nothing else. No crapware. No nothing. These are fairly common applications that shouldn't conflict with iTunes.
- Antivirus is the built-in Windows Defender.
- Firewall is the built-in Windows Firewall.
- Intel HD Graphics 3000 on an Acer V3-571-6486
- I have not moved Apple's folder from Romaing and Local AppData of the old systems... So it's a clean iTunes profile.
- I can sucessfully sign-in to the iTunes Store with this account on another computer
- I have tried with multiple accounts on this computer, all crashing
There are tons of threads about this. I tried all the solutions posted, including:
- Adding "C:\Program Files (x86)\Common Files\Apple\Apple Application Support" to the PATH environment variable
- Copying QTMovieWin.dll from "C:\Program Files (x86)\Common Files\Apple\Apple Application Support" to "C:\Program Files (x86)\iTunes"
- Moving QTMovieWin.dll from "C:\Program Files (x86)\Common Files\Apple\Apple Application Support" to "C:\Program Files (x86)\iTunes"
- Updating the graphics card to the latest available driver from Intel's website (9.17.10.3517, 2014-10-04)
- Downgrade the graphics driver (9.17.10.3347, 2014-01-29)
- Use the graphic's driver from Acer's website.
- Use Microsoft's Basic VGA Driver
- Disable the Graphic's Adapter entirely
- Have tried to monitor the process with ProcMon, looking for a hint like a missing file or registry entry, but have not found anything helpful.
These solutions seem to have worked for almost everyone, but not me. The crash details in the Windows Application log are useless. Faulty module name is 'unknown'.
I am out of solutions. Is there anything left to do? Can anyone out Apple debug the dump file or something? Is there any way to contact Apple about this issue?
Many thanks.Hey zoyashahab,
Ok, so it sounds like there are two issues here we want to address, the first being the iTunes Store connection issue and the second being iTunes not recognizing your iOS devices.
First, I'd start with troubleshooting the recognition by following the steps in here:
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
If after getting that running again, you still can't connect to the iTunes Store, then I'd go through the troubleshooting steps in here:
Can't connect to the iTunes Store
http://support.apple.com/kb/TS1368
Welcome to Apple Support Communities!
Best,
Delgadoh -
After upgrade IPHONE 4 to IOS 7 , it work 2days, and now it is off, not recognized on the pc and no battery logo when connecting to the sector
I'm happy to say that I solved the problem, and for the community (for the "next generation" that will search a solution for this problem) - I will publish the solution for this problem : I defined as new iphone, and then the restore showed up!
All wishes everyone... -
My ipod 4g has been working fine for the last 2 years until now, it wont charge or connect to itunes what so ever. it will connect to the dock and play music but just wont charge on any charger, computer,cord,anything. its making me so frustrated i think it has somthing to do with the battery but im not sure because it still turns on. Im for sure that its the ipod and not the cord or outlet and charger. somone please help!!!!!! I tried everything besides opening it up.
I dont know what to do???????Not Charge
- See:
iPod touch: Hardware troubleshooting
iPhone and iPod touch: Charging the battery
- Try another cable.
- Try another charging source
- Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar -
my iphone 4 will not turn on but when connected to the pc in itunes it says my device is in recovery mode and when i do SHIFT restore and select my ipsw it extracts then this 3914 error message appears. i normal restore then it this error message appears 1601. and my iphone is in RECOVERY mode. and holding the power button and the home button doesnt do anything my latops just makes a ding sound after 6seconds. My iphone screen is just blank and will not come on and i really need help
Has the iPod been wetted?
Try DFU mode and then restore
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
Try on another computer.
Also see:
https://discussions.apple.com/message/12690674#12690674
https://discussions.apple.com/message/13032101#13032101
Last, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar -
I just bought the new MacBook Air a few days ago and my Internet connection is so slow. My iPhone's connection works fine when connected to the wifi but the MacBook connects for a few seconds then drops completely. What do I do? I tried connecting it to my phone's hotspot and it works perfectly. I'm a new Mac user so I have no idea what to do. I have Comcast xfinity cable and Internet. Thanks for the help.
Your warranty includes 90 days of phone support. Contact Apple.
-
when connecting to the itunes store i get a mess: (itunes has stopped working) all i can do is close the peogram. i was on the phoine with apple today over 2 hrs still cant fix it. unistalled it 3x and in the proper order. reset all internet connection to default setting, turned off virus programs ect. Even the tech at apple by remote access couldnt fix it. use microsoft fix it also no good....\
I am having the same problem now also. It happened after I updated my version. I have NEVER had this problem before as a windows user and have had iTunes for 5 years. So, I would have to say it is an Apple problem. I have not changed anything on my computer. I still have Internet Explorer and I have not even updated windows. The only thing I updated was iTunes. Now, I am not getting any response from Apple and if you call you have to pay for support. What a joke. An iPod costs $400 you would think that after paying that much you would at least get some type of help. This will now be the last time I ever by anything apple.
-
My iPhone 5 is freezing when connected to the charger. This is not happinning if it is connected to the computer USB. How to solve this problem?
Possibly faulty charger. The supplied Apple Charger is covered by the iPhone Warranty. Make Genius reservation or set up service and take or send iPhone and Charger to Apple for resolution.
-
My apple tv, when connected to the television, will only show an itunes icon with a usb cord
My apple tv, when connected to the television, will only show an itunes icon with a usb cord. I don't know whay to do?
Don Sullivan wrote
"Same thing just happened to me. There was a software update available, it installed the update and then died with that visual on the screen. Reset doesn't work and it won't even show up in iTunes to try and do anything with it. I think they just bricked it on me."
Same thing just happened to me too...
I did an update a couple of days ago: and it seemed to be working fine. Just did another update today: got a flashing light, sometimes a blank screen, and sometimes the itunes logo / USB symbol... -
My web pages aren't loading when connected to the internet through Ethernet cable?
Yesterday my web pages stopped loading on Safari. I tried loading them on google chrome and had the same problem. I then deleted all saved web site data and reset Safari but this still didn't solve the problem. Finally I restarted with safe mode, where the web pages loaded, but slowly, however when I restarted normally the web pages still weren't loading or partially loading. To test whether this was my computer or the ethernet cable I was connected to, I connected to the wifi at my university, where the web pages loaded perfectly. Plus, when connected to the ethernet cable I could Skype, use Spotify etc., it is just the web pages that are causing a problem. Any suggestions how I can fix this? Thank you!
1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. All it does is to collect information about the state of the computer. That information goes nowhere unless you choose to share it. However, you should be cautious about running any kind of program (not just a shell script) at the request of a stranger on a public message board. If you have doubts, search this site for other discussions in which this procedure has been followed without any report of ill effects. If you can't satisfy yourself that the instructions are safe, don't follow them. Ask for other options.
Here's a summary of what you need to do, if you choose to proceed: Copy a line of text from this web page into the window of another application. Wait for the script to run. It usually takes a few minutes. Then paste the results, which will have been copied automatically, back into a reply on this page. The sequence is: copy, paste, wait, paste again. Details follow.
4. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
5. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
6. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin; clear; Fb='%s\n\t(%s)\n'; Fm='\n%s\n\n%s\n'; Fr='\nRAM details\n%s\n'; Fs='\n%s: %s\n'; Fu='user %s%%, system %s%%'; AC="com.autodesk.AutoCAD com.google.GoogleDrive"; H='^[[:space:]]*((127\.0\.0\.1|::1|fe80::1%lo0)[[:space:]]+local|(255\.){3}255[[:space:]]*broadcast)host[[:space:]]*$'; NS=networksetup; PB="/usr/libexec/PlistBuddy -c Print"; A () { [[ a -eq 0 ]]; }; M () { find -L "$d" -type f | while read f; do file -b "$f" | egrep -lq XML\|exec && echo $f; done; }; AT () { o=`file -b "$1" | egrep -v '^(A.{16}t$|cann)'`; Ps "${1##*/} format"; }; Pc () { o=`grep -v '^ *#' "$2"`; l=`wc -l <<< "$o"`; [[ l -gt 25 ]] && o=`head -n25 <<< "$o"`$'\n'"[$((l-25)) more line(s)]"; Pm "$1"; AT "$1"; }; Pm () { [[ "$o" ]] && o=`sed -E '/^ *$/d; s/^ */ /; s/[-0-9A-Fa-f]{22,}/UUID/g' <<< "$o"` && printf "$Fm" "$1" "$o"; }; Pp () { o=`$PB "$2" | awk -F'= ' \/$3'/{print $2}'`; Pm "$1"; }; Ps () { o=`echo $o`; [[ ! "$o" =~ ^0?$ ]] && printf "$Fs" "$1" "$o"; }; R () { o=; [[ r -eq 0 ]]; }; SP () { system_profiler SP${1}DataType; }; id -G | grep -qw 80; a=$?; A && sudo true; r=$?; t=`date +%s`; clear; { A || echo $'No admin access\n'; A && ! R && echo $'No root access\n'; SP Software | sed '8!d;s/^ *//'; h=(`SP Hardware | awk '/ Id/{print $3}; /Mem/{print $2}'`); o=$h; Ps "Model"; o=$((h[1]<4?h[1]:0)); Ps "Total RAM (GB)"; o=`SP Memory | sed '1,5d;/[my].*:/d'`; [[ "$o" =~ s:\ [^O]|x([^08]|0[^2]|8[^0]) ]] && printf "$Fr" "$o"; o=`SP Diagnostics | sed '5,6!d'`; [[ "$o" =~ Pass ]] || Pm "POST"; p=`SP Power`; o=`awk '/Cy/{print $NF}' <<< "$p"`; o=$((o>=300?o:0)); Ps "Battery cycles"; o=`sed -n '/Cond.*: [^N]/{s/^.*://p;}' <<< "$p"`; Ps "Battery condition"; for b in Thunderbolt USB; do o=`SP $b | sed -En '1d;/:$/{s/ *:$//;x;s/\n//p;};/^ *V.* [0N].* /{s/ 0x.... //;s/[()]//g;s/(.*: )(.*)/ \(\2\)/;H;};/Apple|Genesy|Intel|SMSC/{s/.//g;h;}'`; Pm $b; done; o=`pmset -g therm | sed 's/^.*C/C/'`; [[ "$o" =~ No\ th|pms ]] && o=; Pm "Thermal conditions"; o=`pmset -g sysload | grep -v :`; [[ "$o" =~ =\ [^GO] ]] || o=; Pm "System load advisory"; o=`nvram boot-args | awk '{$1=""; print}'`; Ps "boot-args"; a=(/ ""); A=(System User); for i in 0 1; do o=`cd ${a[$i]}L*/Lo*/Diag* || continue; for f in *.{cr,h,pa,s}*; do [[ -f "$f" ]] || continue; d=$(stat -f%Sc -t%F "$f"); [[ "$f" =~ h$ ]] && grep -lq "^Thread c" "$f" && f="$f *"; echo "$d ${f%%_2*} ${f##*.}"; done | sort | tail`; Pm "${A[$i]} diagnostics"; done; grep -lq '*$' <<< "$o" && printf $'\n* Code injection\n'; o=`syslog -F bsd -k Sender kernel -k Message CReq 'caught bu|GPU |hfs: Ru|I/O e|last value [1-9]|n Cause: -|NVDA\(|pagin|proc: t|Roamed|SATA W|ssert|Thrott|timed? ?o' | tail -n25 | awk '/:/{$4=""; $5=""};1'`; Pm "Kernel messages"; o=`df -m / | awk 'NR==2 {print $4}'`; o=$((o<5120?o:0)); Ps "Free space (MiB)"; o=$(($(vm_stat | awk '/eo/{sub("\\.",""); print $2}')/256)); o=$((o>=1024?o:0)); Ps "Pageouts (MiB)"; s=( `sar -u 1 10 | sed '$!d'` ); [[ s[4] -lt 85 ]] && o=`printf "$Fu" ${s[1]} ${s[3]}` || o=; Ps "Total CPU usage" && { s=(`ps acrx -o comm,ruid,%cpu | sed '2!d'`); n=$((${#s[*]}-1)); c="${s[*]}"; o=${s[$n]}%; Ps "CPU usage by process \"${c% ${s[$((n-1))]}*}\" with UID ${s[$((n-1))]}"; }; s=(`top -R -l1 -n1 -o prt -stats command,uid,prt | sed '$!d'`); n=$((${#s[*]}-1)); s[$n]=${s[$n]%[+-]}; c="${s[*]}"; o=$((s[$n]>=25000?s[$n]:0)); Ps "Mach ports used by process \"${c% ${s[$((n-1))]}*}\" with UID ${s[$((n-1))]}"; o=`kextstat -kl | grep -v com\\.apple | cut -c53- | cut -d\< -f1`; Pm "Loaded extrinsic kernel extensions"; R && o=`sudo launchctl list | awk 'NR>1 && !/0x|com\.(apple|openssh|vix\.cron)|org\.(amav|apac|calendarse|cups|dove|isc|ntp|openld|post[fg]|x)/{print $3}'`; Pm "Extrinsic daemons"; o=`launchctl list | awk 'NR>1 && !/0x|com\.apple|org\.(x|openbsd)|\.[0-9]+$/{print $3}'`; Pm "Extrinsic agents"; o=`for d in {/,}L*/Lau*; do M; done | egrep -v 'com\.apple\.(CSConfig|server)' | while read f; do ID=$($PB\ :Label "$f") || ID="No job label"; printf "$Fb" "$f" "$ID"; done`; Pm "launchd items"; o=`for d in /{S*/,}L*/StartupItems; do M; done`; Pm "Startup items"; sys=`pkgutil --regexp --only-files --files com.apple.pkg.* | sort | uniq | sed 's:^:/:'`; b=`sed -E '/^.+Lib.+\/Contents\/Info.plist$/!d;s/\/Info.plist$//;/Contents\/./d' <<< "$sys"`; l=`egrep '^/usr/lib/.+dylib$' <<< "$sys"`; [[ "$b" && "$l" ]] && { o=`find -L /S*/L*/{C*/Sec*A,E}* {/,}L*/{A*d,Compon,Ex,In,iTu,Keyb,Mail/B,P*P,Qu*T,Scripti,Sec,Servi,Spo}* -type d -name Contents -prune | grep -Fv "$b" | while read d; do test -f "$d/Info.plist" || continue; ID=$($PB\ :CFBundleIdentifier "$_") || ID="No bundle ID"; printf "$Fb" "${d%/Contents}" "$ID"; done`; Pm "Extrinsic loadable bundles"; o=`find /usr/lib -type f -name *.dylib | grep -Fv "$l"`; Pm "Extrinsic shared libraries"; :; } || echo $'\nReceipts missing'; o=`for e in INSERT_LIBRARIES LIBRARY_PATH; do launchctl getenv DYLD_$e; done`; Pm "Environment"; o=`find -L {,/u*/lo*}/e*/periodic -type f -mtime -10d`; Pm "Modified periodic scripts"; o=`scutil --proxy | grep Prox`; Pm "Proxies"; o=`scutil --dns | awk '/r\[0\] /{if ($NF !~ /^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./) print $NF; exit}'`; i=`route -n get default | awk '/e:/{print $2}'`; I=`$NS -listnetworkserviceorder | sed -En '/ '$i'\)$/{x;s/^\(.+\) //p;q;};x'`; n=`$NS -getdnsservers "$I" | awk '!/^T/{print "not "}'`; Ps "DNS (${n}from DHCP)"; o=`$NS -getinfo "$I" | awk '/k:/{if ($3 !~ "(255\.){3}0") print $3}'`; Ps "Netmask"; R && o=`sudo profiles -P | grep : | wc -l`; Ps "Profiles"; f=auto_master; [[ `md5 -q /etc/$f` =~ ^b166 ]] || Pc $f /etc/$f; for f in fstab sysctl.conf crontab launchd.conf; do Pc $f /etc/$f; done; f=/etc/hosts; Pc "hosts" <(egrep -v "$H" $f ); AT $f; Pc "User launchd" ~/.launchd*; R && Pc "Root crontab" <(sudo crontab -l); Pc "User crontab" <(crontab -l | sed -E 's:/Users/[^/]+/:/Users/USER/:g'); R && o=`sudo defaults read com.apple.loginwindow LoginHook`; Pm "Login hook"; LD="$(`find /S*/*/F* -type f -name lsregister | head -n1` -dump)"; o=`for ID in $AC; do [[ "$LD" =~ $ID ]] && echo $ID; done`; Pm "Application check"; Pp "Global login items" /L*/P*/loginw* Path; Pp "User login items" L*/P*/*loginit* Name; Pp "Safari extensions" L*/Saf*/*/E*.plist Bundle | sed -E 's/(\..*$|-[1-9])//g'; o=`find ~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 \) | wc -l`; Ps "Restricted user files"; cd; o=`SP Fonts | egrep 'id: N|te: Y' | wc -l`; Ps "Font problems"; o=`find L*/{Con,Pref}* -type f ! -size 0 -name *.plist | while read f; do plutil -s "$f" >&- || echo $f; done`; Pm "Bad plists"; d=(Desktop L*/Keyc*); n=(20 7); for i in 0 1; do o=`find "${d[$i]}" -type f -maxdepth 1 | wc -l`; o=$((o<=n[$i]?0:o)); Ps "${d[$i]##*/} file count"; done; o=; [[ UID -eq 0 ]] && o=root; Ps "UID"; o=$((`date +%s`-t)); Ps "Elapsed time (s)"; } 2>/dev/null | pbcopy; exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
7. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Click anywhere in the Terminal window and paste (command-V). The text you pasted should vanish immediately. If it doesn't, press the return key.
8. If you see an error message in the Terminal window such as "syntax error," enter
exec bash
and press return. Then paste the script again.
9. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
10. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
[Process completed]
to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report the results. No harm will be done.
11. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
12. When you post the results, you might see the message, "You have included content in your post that is not permitted." It means that the forum software has misidentified something in the post as a violation of the rules. If that happens, please post the test results on Pastebin, then post a link here to the page you created.
Note: This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Terms of Use of the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.
Maybe you are looking for
-
Iphone and at&t - the truth about at&t service for the iphone
i love my iphone. the only problem has been using at&t in southern california. in los angeles there are major holes in the service, and multiple hour delays on delivery of voicemails and emails. so ive been on the phone with technical and customer su
-
No warning when deleting a Master image that is linked to Virtual Copies?!
Scenario: I am trying to clear out old images to free up storage space, so I go back though thousands of images looking for weak . unrequired shots. Problem; when dealing with "mass deletions" it is near impossible to detect which images are "Master
-
Had to restore my iPad because of stopping an update - will it be okay?
It was updating to the new OS while connected to my computer, but I had to leave in a rush while it was still updating. So I closed my laptop while it was updating. I didn't unplug the iPad itself, but the laptop went into stand-by mode. When I came
-
Usage of Activity types under Cost Centre.
Hi I would like to know the usage of activity types under cost centre. How to do direct and indirect activity type allocation. Please explain indetail from scratch to finish with necessary t.codes at the earliest. Appreciate your cooperation at the
-
How can i reduce the session length ?
Hi, I am using weblogic 5.10 . The session length is too long , i think it defaults to (52 bytes). Is there anyway the length can be reduced to 8 bytes. There is a property "weblogic.httpd.session.sessionIDLeng