T60 - thinkpad ultranav driver is not detected
Hello,
From the following link I downloaded and installed the "UltraNav Utility for Windows 7 (32-bit, 64-bit), Vista (32-bit, 64-bit), XP (32-bit, 64-bit) - ThinkPad "
http://support.lenovo.com/us/en/products/laptops-and-netbooks/thinkpad-t-series-laptops/thinkpad-t60...
My O.S is Windows XP-32
Upon installation completion I was asked to restart the Laptop.
But upon windows boot, the mouse pad is not working. Only the red mouse is working .
I tried <Fn+F8>. It did not make a difference .
From this link I also installed: UltraNav Wizard for Windows 2000/XP".
When I ran the wizard I got the message:
thinkpad ultranav driver is not detected
In the device manager, under "Mice and other pointing devices", there is only PS/2 mouse.
Can you help ?
Thank you in advance,
Z.V
@jeet2113
Thank you for using HP Support Forum. I have brought your issue to the appropriate team within HP. They will likely request information from you in order to look up your case details or product serial number. Please look for a private message from an identified HP contact. Additionally, keep in mind not to publicly post ( serial numbers and case details).
If you are unfamiliar with the Forum's private messaging please click here to learn more.
Thank you,
Omar
I Work for HP
Similar Messages
-
Connected usb driver is not detected in window 8.1
hey .....
HP 250 G3 notebook
connected usb driver is not detected in window 8.1 after update BIOS software ....my current BIOS software version F.22 .... so plsss...fix this problem......@jeet2113
Thank you for using HP Support Forum. I have brought your issue to the appropriate team within HP. They will likely request information from you in order to look up your case details or product serial number. Please look for a private message from an identified HP contact. Additionally, keep in mind not to publicly post ( serial numbers and case details).
If you are unfamiliar with the Forum's private messaging please click here to learn more.
Thank you,
Omar
I Work for HP -
My hp v210(4gb) pen drive is not detected in my pc but it show its properties in my pc
my hp pen drive was not detected in my pc . my os window 7 64 bit but it show properties of the pendrive
Hello commandcomitra,
Take a look at the support Getting Help Guide manual which provides details on support for this product.
Good luck!
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓ -
Problem with creating Connection pool and JNDI, driver is not detected
Hi,
I have an issue with creating Connection Pool and JNDI.
I'm using:
- JDK 1.6
- OS: Linux(ubuntu 8.10)
- Netbeans IDE 6.5.1
- Java EE 5.0
- Apache Tomcat 6.0.18 Its lib directory contains all necessary jar files for Oracle database driver
- Oracle 11g Enterprise
My problem is that the Oracle database driver is not detected when I want to create a pool (it works pretty well and is detected without any problem when I create ordinary connection by DriverManager)
Therefore after running:
InitialContext ic = new InitialContext();
Context context = (Context)ic.lookup("java:comp/env");
DataSource dataSource = (DataSource)context.lookup("jdbc/oracle11g");
Connection connection = dataSource.getConnection();and right after dataSource.getConnection() I have the following exception:
org.apache.tomcat.dbcp.dbcp.SQLNestedException: Cannot load JDBC driver class 'oracle.jdbc.OracleDriver'
at org.apache.tomcat.dbcp.dbcp.BasicDataSource.createDataSource(BasicDataSource.java:1136)
at org.apache.tomcat.dbcp.dbcp.BasicDataSource.getConnection(BasicDataSource.java:880)
at servlets.Servlet1.doPost(Servlet1.java:47)
at servlets.Servlet1.doGet(Servlet1.java:29)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:617)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:717)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:290)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:206)
at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:233)
at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:191)
at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:128)
at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:102)
at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:109)
at org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.java:286)
at org.apache.coyote.http11.Http11Processor.process(Http11Processor.java:845)
at org.apache.coyote.http11.Http11Protocol$Http11ConnectionHandler.process(Http11Protocol.java:583)
at org.apache.tomcat.util.net.JIoEndpoint$Worker.run(JIoEndpoint.java:447)
at java.lang.Thread.run(Thread.java:619)
Caused by: java.lang.ClassNotFoundException: oracle.jdbc.OracleDriver
at java.net.URLClassLoader$1.run(URLClassLoader.java:200)
at java.security.AccessController.doPrivileged(Native Method)
at java.net.URLClassLoader.findClass(URLClassLoader.java:188)
at sun.misc.Launcher$ExtClassLoader.findClass(Launcher.java:229)
at java.lang.ClassLoader.loadClass(ClassLoader.java:307)
at java.lang.ClassLoader.loadClass(ClassLoader.java:252)
at java.lang.ClassLoader.loadClassInternal(ClassLoader.java:320)
at java.lang.Class.forName0(Native Method)
at java.lang.Class.forName(Class.java:169)
at org.apache.tomcat.dbcp.dbcp.BasicDataSource.createDataSource(BasicDataSource.java:1130)
... 17 more
My application context file (context.xml) is:
<?xml version="1.0" encoding="UTF-8"?>
<Context path="/WebApplication3">
<Resource auth="Container"
driverClassName="oracle.jdbc.OracleDriver"
maxActive="8"
maxIdle="4"
name="jdbc/oracle11g"
username="scott"
password="tiger"
type="javax.sql.DataSource"
url="jdbc:oracle:thin:@localhost:1521:database01" />
</Context>and my web.xml is:
<resource-ref>
<description>Oracle Datasource example</description>
<res-ref-name>jdbc/oracle11g</res-ref-name>
<res-type>javax.sql.DataSource</res-type>
<res-auth>Container</res-auth>
</resource-ref>
...I found similar threads in different forums including sun, such as
http://forums.sun.com/thread.jspa?threadID=567630&start=0&tstart=0
http://forums.sun.com/thread.jspa?threadID=639243&tstart=0
http://forums.sun.com/thread.jspa?threadID=5312178&tstart=0
, but no solution.
As many suggest, I also tried to put context directly in the server.xml (instead of my application context) and referencing it by <ResourceLink /> inside my application context but it didn't work and instead it gave me the following message:
org.apache.tomcat.dbcp.dbcp.SQLNestedException: Cannot create JDBC driver of class ' ' for connect URL 'null'
Has anyone succeeded in creating a connection pool with JNDI by using Tomcat 6 or higher ? If yes, could kindly explain about the applied method.
Regards,Hello again,
Finally I managed to run my application also with Tomcat 6.0.18. There was only two lines that had to be modified
in the context.xml file (the context of my application project and not server's)
Instead of writing
<Context antiJARLocking="true" path="/WebApplication2">
type="javax.sql.DataSource"
factory="org.apache.tomcat.dbcp.dbcp.BasicDataSourceFactory"
</Context>we had to write:
<Context antiJARLocking="true" path="/WebApplication2">
type="oracle.jdbc.pool.OracleDataSource"
factory="oracle.jdbc.pool.OracleDataSourceFactory"
</Context>- No modification was needed to be done at server level (niether server.xml nor server context.xml)
- I just added the ojdbc6.jar in $CATALINA_HOME/lib (I didn't even need to add it in WEB-INF/lib of my project)
- The servlet used to do the test was the same that I presented in my precedent post.
For those who have encountered my problem and are interested in the format of the web.xml and context.xml
with Tomcat 6.0, you can find them below:
Oracle server: Oracle 11g Enterprise
Tomcat server version: 6.0.18
Oracle driver: ojdbc.jar
IDE: Netbeans 6.5.1
The context.xml file of the web application
<?xml version="1.0" encoding="UTF-8"?>
<Context antiJARLocking="true" path="/WebApplication2">
<Resource name="jdbc/oracle11g"
type="oracle.jdbc.pool.OracleDataSource"
factory="oracle.jdbc.pool.OracleDataSourceFactory"
url="jdbc:oracle:thin:@localhost:1521:database01"
driverClassName="oracle.jdbc.OracleDriver"
userName="scott"
password="tiger"
auth="Container"
maxActive="100"
maxIdle="30"
maxWait="10000"
logAbandoned="true"
removeAbandoned="true"
removeAbandonedTimeout="60" />
</Context>The web.xml of my web application
<?xml version="1.0" encoding="UTF-8"?>
<web-app version="2.5" xmlns="http://java.sun.com/xml/ns/javaee" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://java.sun.com/xml/ns/javaee http://java.sun.com/xml/ns/javaee/web-app_2_5.xsd">
<resource-ref>
<description>Oracle Database 11g DataSource</description>
<res-type>oracle.jdbc.pool.OracleDataSource</res-type>
<res-auth>Container</res-auth>
<res-ref-name>jdbc/oracle11g</res-ref-name>
</resource-ref>
<servlet>
<servlet-name>Servlet1</servlet-name>
<servlet-class>servlets.Servlet1</servlet-class>
</servlet>
<servlet-mapping>
<servlet-name>Servlet1</servlet-name>
<url-pattern>/Servlet1</url-pattern>
</servlet-mapping>
<session-config>
<session-timeout>
30
</session-timeout>
</session-config>
<welcome-file-list>
<welcome-file>index.jsp</welcome-file>
</welcome-file-list>
</web-app>Ok, now I'm happy as the original problem is completely solved
Regards -
What should i do if my external hard drive is not detected by my mac
what should i do if my external hard drive is not detected by my mac?
need to have the files saved on it and be able to backup via time machineHi:
Here are some of the options I've read about on here that may or may not work:
1. Reset the NVRAM as it may need to be reset to recognize the drive. See below:
http://support.apple.com/kb/ht1379
2. If the drive is a USB drive, put a USB hub between the drive and the unit. As ridiculous as that may sound in some cases it works.
3. If you have some types of hardware problems and want to test them this works:
http://scsc-online.com/Scannerz.html
That's a test tool only. It isn't going to fix anything just diagnose a bunch of possible hardware problems and it costs money, too.
What format is the drive in? Is it a Mac native format like HFS or is it some other format, like NTFS or FAT? -
My flash drive is not detecting in boot menu of hp j110tx
when i m trying install windows 8.1 from usb ,my usb drive is not detecting in my laptop envy j110tx boot menu .
But the same pendrive is detecting in my another pc and it contains bootable file and it is lodable too
I searched everywhere but i got nothing ,so please help me
This question was solved.
View Solution.Hi:
Have you created Windows 8 or 8.1 Installation USB Flash Drive with UEFI?
http://www.eightforums.com/tutorials/2328-uefi-unified-extensible-firmware-interface-install-windows...
http://www.eightforums.com/tutorials/15458-uefi-bootable-usb-flash-drive-create-windows.html
Regards
Visruth
++Please click KUDOS / White thumb to say thanks
++Please click ACCEPT AS SOLUTION to help others, find this solution faster
**I'm a Volunteer, I do not work for HP** -
HP pen drive v165w not detected in windows 7
HP pen drive v165w not detected in windows 7 after using for 4 months. plsee help
How old is the desktop? Versions of Windows XP before SP2 did not recognize usb mass storage devices such as the pen drive. Also, do the usb ports generally work? Have you tried all the usb ports on the desktop?
-
HP x720w 64GB Pen Driver Does not detect on Windows 7 Laptop
HP x720w 64GB Pen Driver Does not detect on Windows 7 Laptop. While it detects on my PC. Same OS. Pls advise.
I will have to wait until a Moderator inspects your image and makes it viewable.
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer -
HP pen drive v165w not detected in windows XP
HP pen drive v165w not detected in windows XP, please help
How old is the desktop? Versions of Windows XP before SP2 did not recognize usb mass storage devices such as the pen drive. Also, do the usb ports generally work? Have you tried all the usb ports on the desktop?
-
Synaptics ThinkPad UltraNav Driver
Hi!Since I updated last week my Synaptics ThinkPad UltraNav, my trackpad sometimes hangup.The driver installed was: http://support.lenovo.com/us/en/products/laptops-and-netbooks/thinkpad-t-series-laptops/thinkpad-t440s/downloads/DS034647 I have the PC for more than 1 year and never notice this behavior. It works OK for sometime but other times the trackpad doesn't work at all and the only that is working is the red button.I notived this behavior in 3 differnt systems in my company recently uptaded to this driver: - T440s with Win7_x64 (20ARA.....)- T440s with Win8.1_x64 (20ARA.....)- X1 Carbon with Win8.1_x64 (344.....) Can you pls investigate and release a new version asap. BR,Tomaz.
Yep, there is definitely a bug with the 18.0.7.103 version of the driver on a T440s. I had to rollback to 18.0.7.57 in order to fix it.
The issue (hang up) happens when my laptop wakes up from sleep. I have to restart in order to bring back the trackpad.
It's a shame that more than 3 months later this driver is still being offered to T440s users via System Update app and has not being fixed. -
My external hard drive is not detected through my Thunderbolt port. How can I fix this?
I just purchard a Seagate GoFlex Portable Adapter for Thunderbolt. I have an internal drive from an old computer that I wanted to access information on. My hard disk is not detected on the disk utility nor can i hear the hard drive turn on and "hum" eventhough the adapter is connected.
Thanks for any help provided.
Items:
Seagate GoFlex Mac Portable Adapter for Thunderbolt and Thunderbolt Cable
http://www.seagate.com/external-hard-drives/portable-hard-drives/performance/gof lex-for-mac-thunderbolt/
Seagate 200GB Internal Hard driveHere you go
Intel-based Macs: Resetting the System Management Controller (SMC) -
PowerBook G4 12" Hard Drive upgrade not detected
Hi,
The original 80GB drive in my 12" PowerBook just died. I had been planning to upgrade anyway so I went out and bought a 320GB WD Scorpio Blue PATA drive. I followed the instructions on iFixIt to change the drive and reassembled the PowerBook. I checked all connectors and I can hear the drive spin up when I turn on the laptop. However, the Leopard install DVD does not detect the new drive. It doesn't show in System Profiler or in Disk Utility. I have verified that the drive works by connecting it via a USB enclosure to my iMac. Am I missing something? Is the 320GB drive compatible with my PB?
ThanksGiven that the HD works fine in an external enclosure but isn't detected at all when mounted internally, I surmise that either (a) you failed to get its flex cable firmly reconnected to the logic board, or to the drive itself, when reassembling it, or (b) you damaged the flex cable itself. Press the connectors very firmly into place, especially the logic board connector, then test again. If that doesn't help, you may want to order a replacement cable and see whether that solves the problem.
-
How to manually install driver? Not detecting sound c
Hi,
My problem is when installing off the cd and off the downloaded driver it will not detect a creative product. I have li've! 5. with windows SP2. All I want to do is install the driver, doing it the windows search way does not work.
I want do MANUALLY do it, where are the sound card drivers located in windows so I can extract the files to there?
KX project makes my front speakers sound like rear so that is not a fix.How to manually install drivers. Explore your installation CD or also the extracted creative downloaded web drivers (Use winrar to extract the exe file to your hard dri've)?Location of the "Creative Driver Update Utility"?X:\Audio\Drivers\?Double-click the file "Setup.exe"
Make sure "Driver Installation" box is checked and also check the box "Overwrite existing shared Creative audio driver files"?Click "OK"?This will take sometime to install the drivers. You'll be?asked to reboot?your computer. Thats it!
?Message Edited by freesky on 08-25-200705:20 AM -
New 27" iMac ejecting external hard drive and not detecting it consistently
I purchased my iMac from Best Buy two days ago and am wondering if I have a lemon. During the process of transferring files via an external hard drive I have noticed a number of issues. My old 2007 iMac had no problem reading the drive but my new iMac keeps ejecting the disk every couple of minutes. I will get a message in the corner of my computer stating that it was not ejected properly.
At one point, the new iMac would not read the drive at all. I plugged in my iPhone and it detected it at first but eventually ejected it and would not detect it again either, not even to charge it. I restarted the computer and it started detecting the iPhone and the external the drive, but now I am back to getting the same error message. I have tried to repair the disk using disk utility and it does not detect any problems. I also tried using every single usb port.
I would appreciate any suggestions and will be taking it back if it keeps having issues.
New 27" iMac
3.2 GHz Intel Core i5
8 gb 1600 MHz DDR3
Mavericks 10.9.4You have 90 days of free AppleCare telephone support, call them today and report the issue. You can find the number in your country by clicking:
Contact Apple for support and service -
USB FLASH DRIVE v155w Not detecting in any computer.
I purchased HP USB FLASH DRIVE from UNITED COMPUTERS, SECUNDERABAD, AP. on 11/dec/2009, i was a working great till i have inserted it in one of my office computer on 4/mar/2010, i dont know wat happened, since then it is not been detected by any other computer.
1. can i know wat could be the problem.
2. if it is gone how do i replace it.
3. can i know the address of HP service centre in Hyderabad, Andhra Pradesh.
Please do the needfull.Sir
My Hp 4 GB V155W Pen drive have not recogenised in my all computers.. it has been very costly for me. my all costly data is in... what can i do plz say me.....
Maybe you are looking for
-
Friends, I'm having some audio-midi setup problems on my G4/1.25/10.5.1 machine. I'm thinking that a routine OS upgrade might help. However, this machine is not connected to the internet. Are there any alternate methods for upgrading system softwa
-
Error page while running sample page in OAF
Hi i'm using new R12 instance, i started to create OAF page , at first i started with sample page. When i was compiled , no errors came. But in run time i got the following error: "Error Page You have encountered an unexpected error. Please contact t
-
safari version 2.0.3 (417.9.2) File Download limited to 4 files at a time... the rest are pending... - it did not used to be this way - - is there a way to up the limit to more than 4 things at a time - if so how?
-
Cross-references between jarred helpsets
Hello, I have a Help system that uses several merged HelpSets. I am wondering if it is possible to create cross-references between files that are in different jarred helpsets. If it is possible, what would the syntax look like. Thanks Tim
-
Multicast Error When Starting Managed Servers
Environment: HP-UX 11i, Weblogic 8.1 SP1. We're getting the following error when we start managed servers in our clustered environment: <Feb 24, 2004 6:33:12 PM CST> <Error> <Cluster> <BEA-000116> <Failed to join cluster PDICluste