T60 win7 x1400 external monitor crashes...

hi, i am running a t60 with x1400 and a postville ssd. at the moment my computer crashes regualry after a while when i connect an external monitor. doesn't matter if direct or via docking station. nor it makes a difference if i have to external monitors connected. short before the computer crashes the cursor will trasnform from a pointer to the thing you can see on the attached image. cursor will be still functional. up to 60 seco nds later the computer crashes showing a disturbed view on the monitor. you can't see the original content of the monitor anymore.  not shure if it helps preventing from crashing moving the mouse from left to right monitor and clicking right mouse button. sometimes the cursor recovers..
http://wahllokal.es/cursor.jpg

I have the same problem on my T60P!  I am not having heat issues; I believe that the issue is that Lenovo has not released a Win7 x64 driver for the video card.  I have an ATI Mobility FireGL V5250, and the latest driver that windows can find is from 12/1/2008.  Lenovo has no driver for Win7 in their matrix, and the Vista driver will not work.  I have all other updates installed from Lenovo, and am running BIOS ver. 2.25
Lenovo, PLEASE request an updated driver from ATI for these computers!
ATI has the drivers written, it is just up to Lenovo to request the driver be compiled for our computers!  I run an external monitor via DVI-D at 1900x1200 resolution, and this causes the computer to crash at least 4-5 times per day.  Sometimes I get a BSOD, sometimes it locks up, sometimes it just goes black.  If I don't have an external display connected, I never have any issues.
Lenovo, please support us!

Similar Messages

  • Enabling external monitor crashes Compiz

    I'm having a problem extending my desktop to an external monitor from my laptop. I'm using Compiz-fusion icon to replace Xfwm4 in Xfce. I activate the external monitor using
    xrandr --output VGA1 --mode 1440x900
    It turns on no problem and resizes my desktop to 1440x900. My laptop screen now shows the top left corner of the desktop (it's 1024x600).
    So now I try to extend the desktop so each screen can be used separately with this
    xrandr --output VGA1 --right-of LVDS1
    This works, for the most part. The only problem is that compiz crashes. I've tried re-enabling it afterwards but it just crashes again. I used fusion-icon to swap to xfwm4 and everything works fine. Does anyone know (how to check) why this is happening?

    some hardware doesnt support textures higher than 2048, so if the added display real estate is bigger than that, you cannot use compiz that way.
    try setting the second display below the first one (thats what i did), and see if it works that way (remember, neither height nor width can be bigger than 2048)

  • MBP & Lion with external monitor crashes!

    I have a macbook pro 13'' (2011) and OS X Lion. But the mac crashes every time I try to boot while I use an external monitor.
    I only get 2 white screens (on the monitor and on the mac), the fan gets very loud and nothing happens anymore.
    The only way to boot is to boot the mac without an external monitor.
    It's plugged in via HDMI and an HDMI to mini displayport adapter.
    The Monitor is a Samsung Syncmaster XL2370HD.
    I hope anyone has a solution for me.

    I have the same problem.  I have MBP 13" and it used to able to hooked up to 23" PHillips Monitor via displayport to VGI.  But after installing Lion and after everything connected, my external monitor does not work everytime I close my MBP.  Before with S leopard, when I close my MBP and wake the comp using bluetooth keyboard (apple), i was able to wake the MBP and the external monitor displays.  But now (Lion) when I close MBP, external monitor shows this error message "Cannot display this video mode, change computer display input to 1280 x 760 @ 60 Hz". Then I opened MBP and I changed the display to 1280 x 760 but when I close MBP, the external monitor shows the same error message. 
    MBP 13" 2.26Ghz Intel Core 2 Duo with 2 gig of ram. 

  • External Monitor crashing FCP 7 when rendering

    Mid 2012 15inch MBP
    Processor 2.6 GHz Intel Core i7
    Memory 8 GB 1600 MHz DDR3
    Graphics NVIDIA GeForce GT 650M 1024 MB
    Software OS X 10.9.5
    FCP 7.0.3
    Thunderbolt to HDMI adapter to a 30 something inch tv.
    I have a 2 minute music video all pretty much done. Sequence minimized down to one track with Look Suite filters on it, with a film grain overlay. Rendering crashes Final Cut with the second monitor plugged in. I sometimes get the OUT OF MEMORY error as well. Works fine when unplugged.
    How can I make this work with a second monitor setup?
    I need help troubleshooting this or finding the right searches to find other posts with the same problem. I just spent an hour trying various google searches and have just found that a second monitor can slow down FCP. I don't see why that would be an issue for my MBP though.

    Connecting the way your are merely lets you use the HDTV as a second desktop.  If you want to use the HDTV as an external TV monitor (using the proper TV color space) , you'll need something like the Matrox MXO2 Mini: http://www.matrox.com/video/en/products/mac/mxo2_family/mxo2_mini/
    -DH

  • Libreoffice crashes after plug in external monitor

    Hi
    I have XFCE. When i plug in external monitor i get a crash from libreoffice. The message says that libreoffice has crashed and that documents will be saved. Has anybody got simillar issues?
    LibreOffice error message:
    Due to an unexpected errot, LibreOffice vrashed. All the files you were working on will be saved now. The next time LibreOffice is launched, your files will be recovered automatically.
    dmesg:
    [ 0.000000] Initializing cgroup subsys cpuset
    [ 0.000000] Initializing cgroup subsys cpu
    [ 0.000000] Linux version 3.0-ARCH (thomas@evey) (gcc version 4.6.1 (GCC) ) #1 SMP PREEMPT Sat Aug 6 16:49:00 CEST 2011
    [ 0.000000] BIOS-provided physical RAM map:
    [ 0.000000] BIOS-e820: 0000000000000000 - 0000000000097c00 (usable)
    [ 0.000000] BIOS-e820: 0000000000097c00 - 00000000000a0000 (reserved)
    [ 0.000000] BIOS-e820: 00000000000e1000 - 0000000000100000 (reserved)
    [ 0.000000] BIOS-e820: 0000000000100000 - 000000007dd80000 (usable)
    [ 0.000000] BIOS-e820: 000000007dd80000 - 000000007dd8f000 (ACPI data)
    [ 0.000000] BIOS-e820: 000000007dd8f000 - 000000007dde0000 (ACPI NVS)
    [ 0.000000] BIOS-e820: 000000007dde0000 - 000000007de00000 (reserved)
    [ 0.000000] BIOS-e820: 00000000fed20000 - 00000000fed40000 (reserved)
    [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
    [ 0.000000] BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved)
    [ 0.000000] Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel!
    [ 0.000000] DMI 2.5 present.
    [ 0.000000] DMI: ASUSTeK Computer Inc. K50IJ /K50IJ , BIOS 209 07/10/2009
    [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
    [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
    [ 0.000000] last_pfn = 0x7dd80 max_arch_pfn = 0x100000
    [ 0.000000] MTRR default type: uncachable
    [ 0.000000] MTRR fixed ranges enabled:
    [ 0.000000] 00000-9FFFF write-back
    [ 0.000000] A0000-BFFFF uncachable
    [ 0.000000] C0000-CFFFF write-protect
    [ 0.000000] D0000-DFFFF uncachable
    [ 0.000000] E0000-EFFFF write-through
    [ 0.000000] F0000-FFFFF write-protect
    [ 0.000000] MTRR variable ranges enabled:
    [ 0.000000] 0 base 000000000 mask F80000000 write-back
    [ 0.000000] 1 base 07DE00000 mask FFFE00000 uncachable
    [ 0.000000] 2 base 07E000000 mask FFE000000 uncachable
    [ 0.000000] 3 disabled
    [ 0.000000] 4 disabled
    [ 0.000000] 5 disabled
    [ 0.000000] 6 disabled
    [ 0.000000] 7 disabled
    [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
    [ 0.000000] found SMP MP-table at [c00ff780] ff780
    [ 0.000000] initial memory mapped : 0 - 00c00000
    [ 0.000000] Base memory trampoline at [c0093000] 93000 size 16384
    [ 0.000000] init_memory_mapping: 0000000000000000-00000000377fe000
    [ 0.000000] 0000000000 - 0000400000 page 4k
    [ 0.000000] 0000400000 - 0037400000 page 2M
    [ 0.000000] 0037400000 - 00377fe000 page 4k
    [ 0.000000] kernel direct mapping tables up to 377fe000 @ bfb000-c00000
    [ 0.000000] RAMDISK: 7db5b000 - 7dd70000
    [ 0.000000] Allocated new RAMDISK: 375e9000 - 377fd327
    [ 0.000000] Move RAMDISK from 000000007db5b000 - 000000007dd6f326 to 375e9000 - 377fd326
    [ 0.000000] ACPI: RSDP 000f93d0 00024 (v02 ACPIAM)
    [ 0.000000] ACPI: XSDT 7dd80100 00084 (v01 071009 XSDT1636 20090710 MSFT 00000097)
    [ 0.000000] ACPI: FACP 7dd80290 000F4 (v03 071009 FACP1636 20090710 MSFT 00000097)
    [ 0.000000] ACPI: DSDT 7dd80680 0CD1D (v01 K50IJ K50IJ209 00000209 INTL 20051117)
    [ 0.000000] ACPI: FACS 7dd8f000 00040
    [ 0.000000] ACPI: APIC 7dd80390 0005C (v01 071009 APIC1636 20090710 MSFT 00000097)
    [ 0.000000] ACPI: MCFG 7dd80430 0003C (v01 071009 OEMMCFG 20090710 MSFT 00000097)
    [ 0.000000] ACPI: OEMX 7dd80470 00176 (v01 071009 OEMX1636 20090710 MSFT 00000097)
    [ 0.000000] ACPI: ECDT 7dd80620 00054 (v01 071009 OEMECDT 20090710 MSFT 00000097)
    [ 0.000000] ACPI: DBGP 7dd803f0 00034 (v01 071009 DBGP1636 20090710 MSFT 00000097)
    [ 0.000000] ACPI: BOOT 7dd805f0 00028 (v01 071009 BOOT1636 20090710 MSFT 00000097)
    [ 0.000000] ACPI: OEMB 7dd8f040 00071 (v01 071009 OEMB1636 20090710 MSFT 00000097)
    [ 0.000000] ACPI: HPET 7dd8d3a0 00038 (v01 071009 OEMHPET 20090710 MSFT 00000097)
    [ 0.000000] ACPI: GSCI 7dd8f0c0 02024 (v01 071009 GMCHSCI 20090710 MSFT 00000097)
    [ 0.000000] ACPI: ATKG 7dd912f0 08024 (v01 022008 OEMATKG 20080220 MSFT 00000097)
    [ 0.000000] ACPI: SSDT 7dd99b20 004F0 (v01 PmRef CpuPm 00003000 INTL 20051117)
    [ 0.000000] ACPI: DMI detected: ASUS K50IJ
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] 1125MB HIGHMEM available.
    [ 0.000000] 887MB LOWMEM available.
    [ 0.000000] mapped low ram: 0 - 377fe000
    [ 0.000000] low ram: 0 - 377fe000
    [ 0.000000] Zone PFN ranges:
    [ 0.000000] DMA 0x00000010 -> 0x00001000
    [ 0.000000] Normal 0x00001000 -> 0x000377fe
    [ 0.000000] HighMem 0x000377fe -> 0x0007dd80
    [ 0.000000] Movable zone start PFN for each node
    [ 0.000000] early_node_map[2] active PFN ranges
    [ 0.000000] 0: 0x00000010 -> 0x00000097
    [ 0.000000] 0: 0x00000100 -> 0x0007dd80
    [ 0.000000] On node 0 totalpages: 515335
    [ 0.000000] free_area_init_node: node 0, pgdat c05add00, node_mem_map f6628200
    [ 0.000000] DMA zone: 32 pages used for memmap
    [ 0.000000] DMA zone: 0 pages reserved
    [ 0.000000] DMA zone: 3943 pages, LIFO batch:0
    [ 0.000000] Normal zone: 1744 pages used for memmap
    [ 0.000000] Normal zone: 221486 pages, LIFO batch:31
    [ 0.000000] HighMem zone: 2252 pages used for memmap
    [ 0.000000] HighMem zone: 285878 pages, LIFO batch:31
    [ 0.000000] Using APIC driver default
    [ 0.000000] ACPI: PM-Timer IO Port: 0x808
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
    [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
    [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
    [ 0.000000] ACPI: IRQ0 used by override.
    [ 0.000000] ACPI: IRQ2 used by override.
    [ 0.000000] ACPI: IRQ9 used by override.
    [ 0.000000] Using ACPI (MADT) for SMP configuration information
    [ 0.000000] ACPI: HPET id: 0x8086a301 base: 0xfed00000
    [ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
    [ 0.000000] nr_irqs_gsi: 40
    [ 0.000000] PM: Registered nosave memory: 0000000000097000 - 0000000000098000
    [ 0.000000] PM: Registered nosave memory: 0000000000098000 - 00000000000a0000
    [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e1000
    [ 0.000000] PM: Registered nosave memory: 00000000000e1000 - 0000000000100000
    [ 0.000000] Allocating PCI resources starting at 7de00000 (gap: 7de00000:80f20000)
    [ 0.000000] Booting paravirtualized kernel on bare hardware
    [ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1
    [ 0.000000] PERCPU: Embedded 12 pages/cpu @f6000000 s25472 r0 d23680 u2097152
    [ 0.000000] pcpu-alloc: s25472 r0 d23680 u2097152 alloc=1*4194304
    [ 0.000000] pcpu-alloc: [0] 0 1
    [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 511307
    [ 0.000000] Kernel command line: root=/dev/sda1 ro quiet
    [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
    [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
    [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
    [ 0.000000] Initializing CPU#0
    [ 0.000000] xsave/xrstor: enabled xstate_bv 0x3, cntxt size 0x240
    [ 0.000000] allocated 8247040 bytes of page_cgroup
    [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
    [ 0.000000] Initializing HighMem for node 0 (000377fe:0007dd80)
    [ 0.000000] Memory: 2027804k/2061824k available (3414k kernel code, 33536k reserved, 1408k data, 500k init, 1152520k highmem)
    [ 0.000000] virtual kernel memory layout:
    [ 0.000000] fixmap : 0xfff16000 - 0xfffff000 ( 932 kB)
    [ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
    [ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
    [ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
    [ 0.000000] .init : 0xc05b6000 - 0xc0633000 ( 500 kB)
    [ 0.000000] .data : 0xc04559d5 - 0xc05b5a00 (1408 kB)
    [ 0.000000] .text : 0xc0100000 - 0xc04559d5 (3414 kB)
    [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
    [ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
    [ 0.000000] Preemptible hierarchical RCU implementation.
    [ 0.000000] Verbose stalled-CPUs detection is disabled.
    [ 0.000000] NR_IRQS:512
    [ 0.000000] CPU 0 irqstacks, hard=f540c000 soft=f540e000
    [ 0.000000] Extended CMOS year: 2000
    [ 0.000000] Console: colour VGA+ 80x25
    [ 0.000000] console [tty0] enabled
    [ 0.000000] hpet clockevent registered
    [ 0.000000] Fast TSC calibration using PIT
    [ 0.000000] Detected 1795.332 MHz processor.
    [ 0.003337] Calibrating delay loop (skipped), value calculated using timer frequency.. 3592.27 BogoMIPS (lpj=5984440)
    [ 0.003343] pid_max: default: 32768 minimum: 301
    [ 0.003394] Security Framework initialized
    [ 0.003400] AppArmor: AppArmor disabled by boot time parameter
    [ 0.003424] Mount-cache hash table entries: 512
    [ 0.003645] Initializing cgroup subsys cpuacct
    [ 0.003661] Initializing cgroup subsys memory
    [ 0.003672] Initializing cgroup subsys devices
    [ 0.003674] Initializing cgroup subsys freezer
    [ 0.003677] Initializing cgroup subsys net_cls
    [ 0.003679] Initializing cgroup subsys blkio
    [ 0.003723] CPU: Physical Processor ID: 0
    [ 0.003725] CPU: Processor Core ID: 0
    [ 0.003728] mce: CPU supports 6 MCE banks
    [ 0.003736] CPU0: Thermal monitoring handled by SMI
    [ 0.003740] using mwait in idle threads.
    [ 0.006852] ACPI: Core revision 20110413
    [ 0.016682] ftrace: allocating 15362 entries in 31 pages
    [ 0.020055] Enabling APIC mode: Flat. Using 1 I/O APICs
    [ 0.020414] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
    [ 0.054743] CPU0: Intel Celeron(R) Dual-Core CPU T3000 @ 1.80GHz stepping 0a
    [ 0.056663] Performance Events: PEBS fmt0+, Core2 events, Intel PMU driver.
    [ 0.056663] ... version: 2
    [ 0.056663] ... bit width: 40
    [ 0.056663] ... generic registers: 2
    [ 0.056663] ... value mask: 000000ffffffffff
    [ 0.056663] ... max period: 000000007fffffff
    [ 0.056663] ... fixed-purpose events: 3
    [ 0.056663] ... event mask: 0000000700000003
    [ 0.073448] NMI watchdog enabled, takes one hw-pmu counter.
    [ 0.100011] CPU 1 irqstacks, hard=f54e8000 soft=f54ea000
    [ 0.100014] Booting Node 0, Processors #1 Ok.
    [ 0.100017] smpboot cpu 1: start_ip = 93000
    [ 0.006666] Initializing CPU#1
    [ 0.006666] CPU1: Thermal monitoring handled by SMI
    [ 0.196686] NMI watchdog enabled, takes one hw-pmu counter.
    [ 0.203325] Brought up 2 CPUs
    [ 0.203328] Total of 2 processors activated (7184.88 BogoMIPS).
    [ 0.204206] devtmpfs: initialized
    [ 0.204206] PM: Registering ACPI NVS region at 7dd8f000 (331776 bytes)
    [ 0.204614] print_constraints: dummy:
    [ 0.204682] NET: Registered protocol family 16
    [ 0.204804] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
    [ 0.204807] ACPI: bus type pci registered
    [ 0.204906] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
    [ 0.204910] PCI: not using MMCONFIG
    [ 0.205140] PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=4
    [ 0.205142] PCI: Using configuration type 1 for base access
    [ 0.206964] bio: create slab <bio-0> at 0
    [ 0.206964] ACPI: Deleted _OSI(Windows 2009)
    [ 0.209160] ACPI: EC: EC description table is found, configuring boot EC
    [ 0.209166] ACPI: EC: Look up EC in DSDT
    [ 0.218122] ACPI: Executed 1 blocks of module-level executable AML code
    [ 0.221024] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
    [ 0.230152] ACPI Warning: Incorrect checksum in table [ATKG] - 0x84, should be 0xE5 (20110413/tbutils-314)
    [ 0.230496] ACPI: SSDT 7dd993b0 00765 (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
    [ 0.231045] ACPI: Dynamic OEM Table Load:
    [ 0.231049] ACPI: SSDT (null) 00765 (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
    [ 0.231346] ACPI: SSDT 7dd99320 00085 (v01 PmRef Cpu1Cst 00003000 INTL 20051117)
    [ 0.231894] ACPI: Dynamic OEM Table Load:
    [ 0.231897] ACPI: SSDT (null) 00085 (v01 PmRef Cpu1Cst 00003000 INTL 20051117)
    [ 0.232248] ACPI: Interpreter enabled
    [ 0.232260] ACPI: (supports S0 S3 S4 S5)
    [ 0.232287] ACPI: Using IOAPIC for interrupt routing
    [ 0.232319] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
    [ 0.234032] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
    [ 0.234035] PCI: Using MMCONFIG for extended config space
    [ 0.243183] ACPI: EC: GPE = 0x1b, I/O: command/status = 0x66, data = 0x62
    [ 0.243546] ACPI: No dock devices found.
    [ 0.243548] HEST: Table not found.
    [ 0.243553] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
    [ 0.243848] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
    [ 0.244065] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
    [ 0.244068] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
    [ 0.244072] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
    [ 0.244075] pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000dffff]
    [ 0.244078] pci_root PNP0A08:00: host bridge window [mem 0x7de00000-0xffffffff]
    [ 0.244094] pci 0000:00:00.0: [8086:2a40] type 0 class 0x000600
    [ 0.244121] DMAR: Forcing write-buffer flush capability
    [ 0.244147] pci 0000:00:02.0: [8086:2a42] type 0 class 0x000300
    [ 0.244164] pci 0000:00:02.0: reg 10: [mem 0xfe400000-0xfe7fffff 64bit]
    [ 0.244174] pci 0000:00:02.0: reg 18: [mem 0xd0000000-0xdfffffff 64bit pref]
    [ 0.244181] pci 0000:00:02.0: reg 20: [io 0xdc00-0xdc07]
    [ 0.244219] pci 0000:00:02.1: [8086:2a43] type 0 class 0x000380
    [ 0.244232] pci 0000:00:02.1: reg 10: [mem 0xfe800000-0xfe8fffff 64bit]
    [ 0.244330] pci 0000:00:1a.0: [8086:2937] type 0 class 0x000c03
    [ 0.244399] pci 0000:00:1a.0: reg 20: [io 0xd880-0xd89f]
    [ 0.244468] pci 0000:00:1a.1: [8086:2938] type 0 class 0x000c03
    [ 0.244535] pci 0000:00:1a.1: reg 20: [io 0xd800-0xd81f]
    [ 0.244604] pci 0000:00:1a.2: [8086:2939] type 0 class 0x000c03
    [ 0.244672] pci 0000:00:1a.2: reg 20: [io 0xd480-0xd49f]
    [ 0.244753] pci 0000:00:1a.7: [8086:293c] type 0 class 0x000c03
    [ 0.244784] pci 0000:00:1a.7: reg 10: [mem 0xfe9fbc00-0xfe9fbfff]
    [ 0.244890] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
    [ 0.244896] pci 0000:00:1a.7: PME# disabled
    [ 0.244932] pci 0000:00:1b.0: [8086:293e] type 0 class 0x000403
    [ 0.244957] pci 0000:00:1b.0: reg 10: [mem 0xfe9f4000-0xfe9f7fff 64bit]
    [ 0.245049] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
    [ 0.245054] pci 0000:00:1b.0: PME# disabled
    [ 0.245086] pci 0000:00:1c.0: [8086:2940] type 1 class 0x000604
    [ 0.245179] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
    [ 0.245185] pci 0000:00:1c.0: PME# disabled
    [ 0.245218] pci 0000:00:1c.1: [8086:2942] type 1 class 0x000604
    [ 0.245311] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
    [ 0.245317] pci 0000:00:1c.1: PME# disabled
    [ 0.245356] pci 0000:00:1c.5: [8086:294a] type 1 class 0x000604
    [ 0.245451] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
    [ 0.245457] pci 0000:00:1c.5: PME# disabled
    [ 0.245494] pci 0000:00:1d.0: [8086:2934] type 0 class 0x000c03
    [ 0.245563] pci 0000:00:1d.0: reg 20: [io 0xd400-0xd41f]
    [ 0.245634] pci 0000:00:1d.1: [8086:2935] type 0 class 0x000c03
    [ 0.245702] pci 0000:00:1d.1: reg 20: [io 0xd080-0xd09f]
    [ 0.245771] pci 0000:00:1d.2: [8086:2936] type 0 class 0x000c03
    [ 0.245839] pci 0000:00:1d.2: reg 20: [io 0xd000-0xd01f]
    [ 0.245920] pci 0000:00:1d.7: [8086:293a] type 0 class 0x000c03
    [ 0.245951] pci 0000:00:1d.7: reg 10: [mem 0xfe9fb800-0xfe9fbbff]
    [ 0.246056] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
    [ 0.246062] pci 0000:00:1d.7: PME# disabled
    [ 0.246091] pci 0000:00:1e.0: [8086:2448] type 1 class 0x000604
    [ 0.246183] pci 0000:00:1f.0: [8086:2919] type 0 class 0x000601
    [ 0.246345] pci 0000:00:1f.2: [8086:2929] type 0 class 0x000106
    [ 0.246377] pci 0000:00:1f.2: reg 10: [io 0xcc00-0xcc07]
    [ 0.246390] pci 0000:00:1f.2: reg 14: [io 0xc880-0xc883]
    [ 0.246404] pci 0000:00:1f.2: reg 18: [io 0xc800-0xc807]
    [ 0.246417] pci 0000:00:1f.2: reg 1c: [io 0xc480-0xc483]
    [ 0.246430] pci 0000:00:1f.2: reg 20: [io 0xc400-0xc41f]
    [ 0.246443] pci 0000:00:1f.2: reg 24: [mem 0xfe9fb000-0xfe9fb7ff]
    [ 0.246501] pci 0000:00:1f.2: PME# supported from D3hot
    [ 0.246506] pci 0000:00:1f.2: PME# disabled
    [ 0.246598] pci 0000:00:1c.0: PCI bridge to [bus 01-01]
    [ 0.246604] pci 0000:00:1c.0: bridge window [io 0xf000-0x0000] (disabled)
    [ 0.246610] pci 0000:00:1c.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
    [ 0.246619] pci 0000:00:1c.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
    [ 0.246718] pci 0000:02:00.0: [168c:002b] type 0 class 0x000280
    [ 0.246751] pci 0000:02:00.0: reg 10: [mem 0xfeaf0000-0xfeafffff 64bit]
    [ 0.246873] pci 0000:02:00.0: supports D1
    [ 0.246876] pci 0000:02:00.0: PME# supported from D0 D1 D3hot D3cold
    [ 0.246883] pci 0000:02:00.0: PME# disabled
    [ 0.246929] pci 0000:00:1c.1: PCI bridge to [bus 02-02]
    [ 0.246935] pci 0000:00:1c.1: bridge window [io 0xf000-0x0000] (disabled)
    [ 0.246941] pci 0000:00:1c.1: bridge window [mem 0xfea00000-0xfeafffff]
    [ 0.246950] pci 0000:00:1c.1: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
    [ 0.247043] pci 0000:03:00.0: [1969:1026] type 0 class 0x000200
    [ 0.247076] pci 0000:03:00.0: reg 10: [mem 0xfebc0000-0xfebfffff 64bit]
    [ 0.247094] pci 0000:03:00.0: reg 18: [io 0xec00-0xec7f]
    [ 0.247203] pci 0000:03:00.0: PME# supported from D3hot D3cold
    [ 0.247210] pci 0000:03:00.0: PME# disabled
    [ 0.247248] pci 0000:00:1c.5: PCI bridge to [bus 03-03]
    [ 0.247254] pci 0000:00:1c.5: bridge window [io 0xe000-0xefff]
    [ 0.247259] pci 0000:00:1c.5: bridge window [mem 0xfeb00000-0xfebfffff]
    [ 0.247268] pci 0000:00:1c.5: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
    [ 0.247370] pci 0000:00:1e.0: PCI bridge to [bus 04-04] (subtractive decode)
    [ 0.247376] pci 0000:00:1e.0: bridge window [io 0xf000-0x0000] (disabled)
    [ 0.247382] pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
    [ 0.247391] pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
    [ 0.247394] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
    [ 0.247397] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
    [ 0.247400] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
    [ 0.247403] pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000dffff] (subtractive decode)
    [ 0.247407] pci 0000:00:1e.0: bridge window [mem 0x7de00000-0xffffffff] (subtractive decode)
    [ 0.247437] pci_bus 0000:00: on NUMA node 0
    [ 0.247441] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
    [ 0.247651] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT]
    [ 0.247695] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P7._PRT]
    [ 0.247885] pci0000:00: Requesting ACPI _OSC control (0x1d)
    [ 0.248174] pci0000:00: ACPI _OSC control (0x1d) granted
    [ 0.259190] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 12)
    [ 0.259248] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 10 12)
    [ 0.259304] ACPI: PCI Interrupt Link [LNKC] (IRQs *6)
    [ 0.259356] ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 7 10 12)
    [ 0.259410] ACPI: PCI Interrupt Link [LNKE] (IRQs 6) *0, disabled.
    [ 0.259462] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 *7 10 12)
    [ 0.259517] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 *4 5 6 7 10 12)
    [ 0.259572] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *10 12)
    [ 0.259683] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
    [ 0.259697] vgaarb: loaded
    [ 0.259699] vgaarb: bridge control possible 0000:00:02.0
    [ 0.259809] PCI: Using ACPI for IRQ routing
    [ 0.259812] PCI: pci_cache_line_size set to 64 bytes
    [ 0.259912] reserve RAM buffer: 0000000000097c00 - 000000000009ffff
    [ 0.259915] reserve RAM buffer: 000000007dd80000 - 000000007fffffff
    [ 0.260058] NetLabel: Initializing
    [ 0.260060] NetLabel: domain hash size = 128
    [ 0.260062] NetLabel: protocols = UNLABELED CIPSOv4
    [ 0.260077] NetLabel: unlabeled traffic allowed by default
    [ 0.260094] HPET: 4 timers in total, 0 timers will be used for per-cpu timer
    [ 0.260103] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
    [ 0.260108] hpet0: 4 comparators, 64-bit 14.318180 MHz counter
    [ 0.270003] Switching to clocksource hpet
    [ 0.273239] Switched to NOHz mode on CPU #0
    [ 0.273288] Switched to NOHz mode on CPU #1
    [ 0.277882] pnp: PnP ACPI init
    [ 0.277905] ACPI: bus type pnp registered
    [ 0.278057] pnp 00:00: [bus 00-ff]
    [ 0.278061] pnp 00:00: [io 0x0cf8-0x0cff]
    [ 0.278064] pnp 00:00: [io 0x0000-0x0cf7 window]
    [ 0.278069] pnp 00:00: [io 0x0d00-0xffff window]
    [ 0.278072] pnp 00:00: [mem 0x000a0000-0x000bffff window]
    [ 0.278075] pnp 00:00: [mem 0x000d0000-0x000dffff window]
    [ 0.278078] pnp 00:00: [mem 0x7de00000-0xffffffff window]
    [ 0.278081] pnp 00:00: [mem 0x00000000-0xffffffff window]
    [ 0.278186] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
    [ 0.278198] pnp 00:01: [mem 0xfed10000-0xfed19fff]
    [ 0.278259] system 00:01: [mem 0xfed10000-0xfed19fff] has been reserved
    [ 0.278264] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.278299] pnp 00:02: [dma 4]
    [ 0.278301] pnp 00:02: [io 0x0000-0x000f]
    [ 0.278304] pnp 00:02: [io 0x0081-0x0083]
    [ 0.278306] pnp 00:02: [io 0x0087]
    [ 0.278309] pnp 00:02: [io 0x0089-0x008b]
    [ 0.278311] pnp 00:02: [io 0x008f]
    [ 0.278313] pnp 00:02: [io 0x00c0-0x00df]
    [ 0.278345] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
    [ 0.278357] pnp 00:03: [io 0x0070-0x0071]
    [ 0.278371] pnp 00:03: [irq 8]
    [ 0.278402] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
    [ 0.278441] pnp 00:04: [io 0x0060]
    [ 0.278443] pnp 00:04: [io 0x0064]
    [ 0.278449] pnp 00:04: [irq 1]
    [ 0.278483] pnp 00:04: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
    [ 0.278536] pnp 00:05: [irq 12]
    [ 0.278575] pnp 00:05: Plug and Play ACPI device, IDs ETD0001 PNP0f0e PNP0f0b PNP0f03 PNP0f13 PNP0f12 (active)
    [ 0.278586] pnp 00:06: [io 0x0061]
    [ 0.278618] pnp 00:06: Plug and Play ACPI device, IDs PNP0800 (active)
    [ 0.278628] pnp 00:07: [io 0x00f0-0x00ff]
    [ 0.278634] pnp 00:07: [irq 13]
    [ 0.278667] pnp 00:07: Plug and Play ACPI device, IDs PNP0c04 (active)
    [ 0.278826] pnp 00:08: [io 0x0010-0x001f]
    [ 0.278829] pnp 00:08: [io 0x0022-0x003f]
    [ 0.278831] pnp 00:08: [io 0x0044-0x005f]
    [ 0.278833] pnp 00:08: [io 0x0063]
    [ 0.278836] pnp 00:08: [io 0x0065]
    [ 0.278838] pnp 00:08: [io 0x0067-0x006f]
    [ 0.278840] pnp 00:08: [io 0x0072-0x007f]
    [ 0.278842] pnp 00:08: [io 0x0080]
    [ 0.278845] pnp 00:08: [io 0x0084-0x0086]
    [ 0.278847] pnp 00:08: [io 0x0088]
    [ 0.278849] pnp 00:08: [io 0x008c-0x008e]
    [ 0.278852] pnp 00:08: [io 0x0090-0x009f]
    [ 0.278854] pnp 00:08: [io 0x00a2-0x00bf]
    [ 0.278856] pnp 00:08: [io 0x00e0-0x00ef]
    [ 0.278859] pnp 00:08: [io 0x04d0-0x04d1]
    [ 0.278861] pnp 00:08: [io 0x0800-0x087f]
    [ 0.278863] pnp 00:08: [io 0x0400-0x041f]
    [ 0.278866] pnp 00:08: [io 0x0500-0x057f]
    [ 0.278869] pnp 00:08: [mem 0xfe9fac00-0xfe9facff window]
    [ 0.278871] pnp 00:08: [mem 0xfed1c000-0xfed1ffff]
    [ 0.278874] pnp 00:08: [mem 0xfed20000-0xfed3ffff]
    [ 0.278876] pnp 00:08: [mem 0xfed45000-0xfed89fff]
    [ 0.278879] pnp 00:08: [mem 0xfed90000-0xfed90fff]
    [ 0.278881] pnp 00:08: [mem 0xfed91000-0xfed91fff]
    [ 0.278884] pnp 00:08: [mem 0xfed92000-0xfed92fff]
    [ 0.278886] pnp 00:08: [mem 0xfed93000-0xfed93fff]
    [ 0.278888] pnp 00:08: [mem 0xffb00000-0xffbfffff]
    [ 0.278891] pnp 00:08: [mem 0xfff00000-0xffffffff]
    [ 0.278969] system 00:08: [io 0x04d0-0x04d1] has been reserved
    [ 0.278973] system 00:08: [io 0x0800-0x087f] has been reserved
    [ 0.278976] system 00:08: [io 0x0400-0x041f] has been reserved
    [ 0.278979] system 00:08: [io 0x0500-0x057f] has been reserved
    [ 0.278982] system 00:08: [mem 0xfe9fac00-0xfe9facff window] has been reserved
    [ 0.278986] system 00:08: [mem 0xfed1c000-0xfed1ffff] has been reserved
    [ 0.278989] system 00:08: [mem 0xfed20000-0xfed3ffff] has been reserved
    [ 0.278993] system 00:08: [mem 0xfed45000-0xfed89fff] has been reserved
    [ 0.278996] system 00:08: [mem 0xfed90000-0xfed90fff] has been reserved
    [ 0.278999] system 00:08: [mem 0xfed91000-0xfed91fff] has been reserved
    [ 0.279002] system 00:08: [mem 0xfed92000-0xfed92fff] has been reserved
    [ 0.279006] system 00:08: [mem 0xfed93000-0xfed93fff] has been reserved
    [ 0.279009] system 00:08: [mem 0xffb00000-0xffbfffff] has been reserved
    [ 0.279012] system 00:08: [mem 0xfff00000-0xffffffff] has been reserved
    [ 0.279016] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.279083] pnp 00:09: [mem 0xfed00000-0xfed003ff]
    [ 0.279119] pnp 00:09: Plug and Play ACPI device, IDs PNP0103 (active)
    [ 0.279178] pnp 00:0a: [mem 0xffa00000-0xffbfffff]
    [ 0.279181] pnp 00:0a: [mem 0xffe00000-0xffffffff]
    [ 0.279236] system 00:0a: [mem 0xffa00000-0xffbfffff] could not be reserved
    [ 0.279239] system 00:0a: [mem 0xffe00000-0xffffffff] could not be reserved
    [ 0.279243] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.279292] pnp 00:0b: [mem 0xffc00000-0xffdfffff]
    [ 0.279347] system 00:0b: [mem 0xffc00000-0xffdfffff] has been reserved
    [ 0.279351] system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.279412] pnp 00:0c: [mem 0xfec00000-0xfec00fff]
    [ 0.279415] pnp 00:0c: [mem 0xfee00000-0xfee00fff]
    [ 0.279417] pnp 00:0c: [mem 0xfec10000-0xfec17fff]
    [ 0.279419] pnp 00:0c: [mem 0xfec18000-0xfec1ffff]
    [ 0.279422] pnp 00:0c: [mem 0xfec38000-0xfec3ffff]
    [ 0.279424] pnp 00:0c: [io 0x0250-0x0253]
    [ 0.279427] pnp 00:0c: [io 0x0256-0x025f]
    [ 0.279484] system 00:0c: [io 0x0250-0x0253] has been reserved
    [ 0.279487] system 00:0c: [io 0x0256-0x025f] has been reserved
    [ 0.279491] system 00:0c: [mem 0xfec00000-0xfec00fff] could not be reserved
    [ 0.279494] system 00:0c: [mem 0xfee00000-0xfee00fff] has been reserved
    [ 0.279497] system 00:0c: [mem 0xfec10000-0xfec17fff] has been reserved
    [ 0.279501] system 00:0c: [mem 0xfec18000-0xfec1ffff] has been reserved
    [ 0.279504] system 00:0c: [mem 0xfec38000-0xfec3ffff] has been reserved
    [ 0.279508] system 00:0c: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.279585] pnp 00:0d: [mem 0xe0000000-0xefffffff]
    [ 0.279641] system 00:0d: [mem 0xe0000000-0xefffffff] has been reserved
    [ 0.279645] system 00:0d: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.279954] pnp 00:0e: [mem 0x00000000-0x0009ffff]
    [ 0.279957] pnp 00:0e: [mem 0x000c0000-0x000cffff]
    [ 0.279965] pnp 00:0e: [mem 0x000e0000-0x000fffff]
    [ 0.279967] pnp 00:0e: [mem 0x00100000-0x7ddfffff]
    [ 0.279970] pnp 00:0e: [mem 0x00000000-0xffffffff disabled]
    [ 0.280081] system 00:0e: [mem 0x00000000-0x0009ffff] could not be reserved
    [ 0.280085] system 00:0e: [mem 0x000c0000-0x000cffff] could not be reserved
    [ 0.280088] system 00:0e: [mem 0x000e0000-0x000fffff] could not be reserved
    [ 0.280092] system 00:0e: [mem 0x00100000-0x7ddfffff] could not be reserved
    [ 0.280095] system 00:0e: Plug and Play ACPI device, IDs PNP0c01 (active)
    [ 0.280257] pnp: PnP ACPI: found 15 devices
    [ 0.280259] ACPI: ACPI bus type pnp unregistered
    [ 0.316954] PCI: max bus depth: 1 pci_try_num: 2
    [ 0.317008] pci 0000:00:1c.5: BAR 15: assigned [mem 0x7de00000-0x7dffffff 64bit pref]
    [ 0.317012] pci 0000:00:1c.0: PCI bridge to [bus 01-01]
    [ 0.317014] pci 0000:00:1c.0: bridge window [io disabled]
    [ 0.317021] pci 0000:00:1c.0: bridge window [mem disabled]
    [ 0.317026] pci 0000:00:1c.0: bridge window [mem pref disabled]
    [ 0.317035] pci 0000:00:1c.1: PCI bridge to [bus 02-02]
    [ 0.317037] pci 0000:00:1c.1: bridge window [io disabled]
    [ 0.317045] pci 0000:00:1c.1: bridge window [mem 0xfea00000-0xfeafffff]
    [ 0.317050] pci 0000:00:1c.1: bridge window [mem pref disabled]
    [ 0.317059] pci 0000:00:1c.5: PCI bridge to [bus 03-03]
    [ 0.317063] pci 0000:00:1c.5: bridge window [io 0xe000-0xefff]
    [ 0.317070] pci 0000:00:1c.5: bridge window [mem 0xfeb00000-0xfebfffff]
    [ 0.317077] pci 0000:00:1c.5: bridge window [mem 0x7de00000-0x7dffffff 64bit pref]
    [ 0.317086] pci 0000:00:1e.0: PCI bridge to [bus 04-04]
    [ 0.317088] pci 0000:00:1e.0: bridge window [io disabled]
    [ 0.317094] pci 0000:00:1e.0: bridge window [mem disabled]
    [ 0.317100] pci 0000:00:1e.0: bridge window [mem pref disabled]
    [ 0.317124] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    [ 0.317130] pci 0000:00:1c.0: setting latency timer to 64
    [ 0.317141] pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
    [ 0.317147] pci 0000:00:1c.1: setting latency timer to 64
    [ 0.317156] pci 0000:00:1c.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17
    [ 0.317162] pci 0000:00:1c.5: setting latency timer to 64
    [ 0.317171] pci 0000:00:1e.0: setting latency timer to 64
    [ 0.317176] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
    [ 0.317179] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
    [ 0.317181] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
    [ 0.317184] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff]
    [ 0.317187] pci_bus 0000:00: resource 8 [mem 0x7de00000-0xffffffff]
    [ 0.317191] pci_bus 0000:02: resource 1 [mem 0xfea00000-0xfeafffff]
    [ 0.317194] pci_bus 0000:03: resource 0 [io 0xe000-0xefff]
    [ 0.317197] pci_bus 0000:03: resource 1 [mem 0xfeb00000-0xfebfffff]
    [ 0.317200] pci_bus 0000:03: resource 2 [mem 0x7de00000-0x7dffffff 64bit pref]
    [ 0.317203] pci_bus 0000:04: resource 4 [io 0x0000-0x0cf7]
    [ 0.317206] pci_bus 0000:04: resource 5 [io 0x0d00-0xffff]
    [ 0.317209] pci_bus 0000:04: resource 6 [mem 0x000a0000-0x000bffff]
    [ 0.317211] pci_bus 0000:04: resource 7 [mem 0x000d0000-0x000dffff]
    [ 0.317214] pci_bus 0000:04: resource 8 [mem 0x7de00000-0xffffffff]
    [ 0.317261] NET: Registered protocol family 2
    [ 0.317339] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
    [ 0.317587] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
    [ 0.318048] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
    [ 0.318337] TCP: Hash tables configured (established 131072 bind 65536)
    [ 0.318341] TCP reno registered
    [ 0.318344] UDP hash table entries: 512 (order: 2, 16384 bytes)
    [ 0.318357] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
    [ 0.318534] NET: Registered protocol family 1
    [ 0.318557] pci 0000:00:02.0: Boot video device
    [ 0.318744] PCI: CLS 32 bytes, default 64
    [ 0.318812] Unpacking initramfs...
    [ 0.362878] Freeing initrd memory: 2132k freed
    [ 0.363915] Simple Boot Flag at 0x51 set to 0x1
    [ 0.364233] apm: BIOS not found.
    [ 0.364425] audit: initializing netlink socket (disabled)
    [ 0.364441] type=2000 audit(1312909012.363:1): initialized
    [ 0.368688] highmem bounce pool size: 64 pages
    [ 0.368694] HugeTLB registered 4 MB page size, pre-allocated 0 pages
    [ 0.378607] VFS: Disk quotas dquot_6.5.2
    [ 0.378705] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
    [ 0.378834] msgmni has been set to 1713
    [ 0.379068] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
    [ 0.379105] io scheduler noop registered
    [ 0.379108] io scheduler deadline registered
    [ 0.379123] io scheduler cfq registered (default)
    [ 0.379271] pcieport 0000:00:1c.0: setting latency timer to 64
    [ 0.379334] pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X
    [ 0.379455] pcieport 0000:00:1c.1: setting latency timer to 64
    [ 0.379513] pcieport 0000:00:1c.1: irq 41 for MSI/MSI-X
    [ 0.379630] pcieport 0000:00:1c.5: setting latency timer to 64
    [ 0.379688] pcieport 0000:00:1c.5: irq 42 for MSI/MSI-X
    [ 0.379845] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
    [ 0.379852] pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
    [ 0.379878] pcieport 0000:00:1c.1: Signaling PME through PCIe PME interrupt
    [ 0.379881] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
    [ 0.379887] pcie_pme 0000:00:1c.1:pcie01: service driver pcie_pme loaded
    [ 0.379912] pcieport 0000:00:1c.5: Signaling PME through PCIe PME interrupt
    [ 0.379915] pci 0000:03:00.0: Signaling PME through PCIe PME interrupt
    [ 0.379921] pcie_pme 0000:00:1c.5:pcie01: service driver pcie_pme loaded
    [ 0.380079] intel_idle: MWAIT substates: 0x2220
    [ 0.380081] intel_idle: does not run on family 6 model 23
    [ 0.380087] ERST: Table is not found!
    [ 0.380103] isapnp: Scanning for PnP cards...
    [ 0.737174] isapnp: No Plug & Play device found
    [ 0.737249] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
    [ 0.927374] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
    [ 0.930998] i8042: Detected active multiplexing controller, rev 1.1
    [ 0.934050] serio: i8042 KBD port at 0x60,0x64 irq 1
    [ 0.934091] serio: i8042 AUX0 port at 0x60,0x64 irq 12
    [ 0.934122] serio: i8042 AUX1 port at 0x60,0x64 irq 12
    [ 0.934155] serio: i8042 AUX2 port at 0x60,0x64 irq 12
    [ 0.934186] serio: i8042 AUX3 port at 0x60,0x64 irq 12
    [ 0.934296] mousedev: PS/2 mouse device common for all mice
    [ 0.934388] rtc_cmos 00:03: RTC can wake from S4
    [ 0.934524] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
    [ 0.934557] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
    [ 0.934588] cpuidle: using governor ladder
    [ 0.934590] cpuidle: using governor menu
    [ 0.934876] TCP cubic registered
    [ 0.934879] NET: Registered protocol family 17
    [ 0.934888] Registering the dns_resolver key type
    [ 0.934915] Using IPI No-Shortcut mode
    [ 0.935017] PM: Hibernation image not present or could not be loaded.
    [ 0.935024] registered taskstats version 1
    [ 0.939311] rtc_cmos 00:03: setting system clock to 2011-08-09 16:56:53 UTC (1312909013)
    [ 0.939352] Initializing network drop monitor service
    [ 0.939447] Freeing unused kernel memory: 500k freed
    [ 0.939681] Write protecting the kernel text: 3416k
    [ 0.939709] Write protecting the kernel read-only data: 1036k
    [ 0.953922] udevd[54]: starting version 173
    [ 0.977498] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
    [ 1.019140] usbcore: registered new interface driver usbfs
    [ 1.019176] usbcore: registered new interface driver hub
    [ 1.049312] usbcore: registered new device driver usb
    [ 1.050500] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    [ 1.050540] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
    [ 1.050563] ehci_hcd 0000:00:1a.7: setting latency timer to 64
    [ 1.050567] ehci_hcd 0000:00:1a.7: EHCI Host Controller
    [ 1.050604] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
    [ 1.050644] ehci_hcd 0000:00:1a.7: debug port 1
    [ 1.068233] SCSI subsystem initialized
    [ 1.068335] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
    [ 1.068361] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xfe9fbc00
    [ 1.079182] libata version 3.00 loaded.
    [ 1.080102] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
    [ 1.080303] hub 1-0:1.0: USB hub found
    [ 1.080309] hub 1-0:1.0: 6 ports detected
    [ 1.080423] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
    [ 1.080445] ehci_hcd 0000:00:1d.7: setting latency timer to 64
    [ 1.080450] ehci_hcd 0000:00:1d.7: EHCI Host Controller
    [ 1.080461] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
    [ 1.080495] ehci_hcd 0000:00:1d.7: debug port 1
    [ 1.084638] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
    [ 1.084665] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfe9fb800
    [ 1.096705] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
    [ 1.097358] hub 2-0:1.0: USB hub found
    [ 1.097365] hub 2-0:1.0: 6 ports detected
    [ 1.097486] ahci 0000:00:1f.2: version 3.0
    [ 1.097508] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
    [ 1.097565] ahci 0000:00:1f.2: irq 43 for MSI/MSI-X
    [ 1.097619] ahci: SSS flag set, parallel bus scan disabled
    [ 1.097653] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 4 ports 3 Gbps 0x3 impl SATA mode
    [ 1.097657] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ccc ems sxs
    [ 1.097664] ahci 0000:00:1f.2: setting latency timer to 64
    [ 1.103903] scsi0 : ahci
    [ 1.104030] scsi1 : ahci
    [ 1.104126] scsi2 : ahci
    [ 1.104218] scsi3 : ahci
    [ 1.104495] ata1: SATA max UDMA/133 abar m2048@0xfe9fb000 port 0xfe9fb100 irq 43
    [ 1.104500] ata2: SATA max UDMA/133 abar m2048@0xfe9fb000 port 0xfe9fb180 irq 43
    [ 1.104502] ata3: DUMMY
    [ 1.104504] ata4: DUMMY
    [ 1.163917] uhci_hcd: USB Universal Host Controller Interface driver
    [ 1.163984] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    [ 1.163997] uhci_hcd 0000:00:1a.0: setting latency timer to 64
    [ 1.164113] uhci_hcd 0000:00:1a.0: UHCI Host Controller
    [ 1.164129] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
    [ 1.164178] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000d880
    [ 1.164368] hub 3-0:1.0: USB hub found
    [ 1.164373] hub 3-0:1.0: 2 ports detected
    [ 1.164477] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
    [ 1.164486] uhci_hcd 0000:00:1a.1: setting latency timer to 64
    [ 1.164490] uhci_hcd 0000:00:1a.1: UHCI Host Controller
    [ 1.164500] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
    [ 1.164539] uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000d800
    [ 1.164699] hub 4-0:1.0: USB hub found
    [ 1.164704] hub 4-0:1.0: 2 ports detected
    [ 1.164787] uhci_hcd 0000:00:1a.2: PCI INT D -> GSI 19 (level, low) -> IRQ 19
    [ 1.164795] uhci_hcd 0000:00:1a.2: setting latency timer to 64
    [ 1.164799] uhci_hcd 0000:00:1a.2: UHCI Host Controller
    [ 1.164808] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
    [ 1.164848] uhci_hcd 0000:00:1a.2: irq 19, io base 0x0000d480
    [ 1.165008] hub 5-0:1.0: USB hub found
    [ 1.165012] hub 5-0:1.0: 2 ports detected
    [ 1.165099] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
    [ 1.165107] uhci_hcd 0000:00:1d.0: setting latency timer to 64
    [ 1.165111] uhci_hcd 0000:00:1d.0: UHCI Host Controller
    [ 1.165122] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
    [ 1.165154] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000d400
    [ 1.165311] hub 6-0:1.0: USB hub found
    [ 1.165316] hub 6-0:1.0: 2 ports detected
    [ 1.165398] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
    [ 1.165408] uhci_hcd 0000:00:1d.1: setting latency timer to 64
    [ 1.165412] uhci_hcd 0000:00:1d.1: UHCI Host Controller
    [ 1.165421] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
    [ 1.165450] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000d080
    [ 1.165607] hub 7-0:1.0: USB hub found
    [ 1.165611] hub 7-0:1.0: 2 ports detected
    [ 1.165696] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
    [ 1.165704] uhci_hcd 0000:00:1d.2: setting latency timer to 64
    [ 1.165708] uhci_hcd 0000:00:1d.2: UHCI Host Controller
    [ 1.165717] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
    [ 1.165747] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000d000
    [ 1.165914] hub 8-0:1.0: USB hub found
    [ 1.165919] hub 8-0:1.0: 2 ports detected
    [ 1.366705] Refined TSC clocksource calibration: 1795.499 MHz.
    [ 1.366711] Switching to clocksource tsc
    [ 1.386680] usb 1-3: new high speed USB device number 2 using ehci_hcd
    [ 1.423359] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
    [ 1.425060] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
    [ 1.425379] ata1.00: ACPI cmd ef/10:06:00:00:00:a0 (SET FEATURES) succeeded
    [ 1.425384] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
    [ 1.427244] ata1.00: ATA-8: ST9320325AS, 0002SDM1, max UDMA/133
    [ 1.427247] ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32)
    [ 1.429377] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
    [ 1.429687] ata1.00: ACPI cmd ef/10:06:00:00:00:a0 (SET FEATURES) succeeded
    [ 1.429691] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
    [ 1.431520] ata1.00: configured for UDMA/133
    [ 1.431677] scsi 0:0:0:0: Direct-Access ATA ST9320325AS 0002 PQ: 0 ANSI: 5
    [ 1.750027] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
    [ 1.765044] ata2.00: ACPI cmd ef/10:06:00:00:00:a0 (SET FEATURES) succeeded
    [ 1.765049] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
    [ 1.778146] ata2.00: ATAPI: Optiarc DVD RW AD-7580S, FX20, max UDMA/100
    [ 1.794186] ata2.00: ACPI cmd ef/10:06:00:00:00:a0 (SET FEATURES) succeeded
    [ 1.794191] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
    [ 1.807014] ata2.00: configured for UDMA/100
    [ 1.810609] scsi 1:0:0:0: CD-ROM Optiarc DVD RW AD-7580S FX20 PQ: 0 ANSI: 5
    [ 1.817797] sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
    [ 1.817854] sd 0:0:0:0: [sda] Write Protect is off
    [ 1.817857] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
    [ 1.817881] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [ 1.822707] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
    [ 1.822711] cdrom: Uniform CD-ROM driver Revision: 3.20
    [ 1.823032] sr 1:0:0:0: Attached scsi CD-ROM sr0
    [ 1.836683] usb 6-2: new low speed USB device number 2 using uhci_hcd
    [ 1.859083] sda: sda1 sda2 sda3 sda4 < sda5 >
    [ 1.859555] sd 0:0:0:0: [sda] Attached SCSI disk
    [ 2.023721] input: MosArt Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb6/6-2/6-2:1.0/input/input1
    [ 2.023829] generic-usb 0003:13EE:0003.0001: input,hidraw0: USB HID v1.10 Mouse [MosArt Optical Mouse] on usb-0000:00:1d.0-2/input0
    [ 2.023850] usbcore: registered new interface driver usbhid
    [ 2.023852] usbhid: USB HID core driver
    [ 2.650851] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
    [ 4.258021] udevd[287]: starting version 173
    [ 4.739711] asus_acpi: Asus Laptop ACPI Extras version 0.30
    [ 4.739876] asus_acpi: unsupported model K50IJ, trying default values
    [ 4.739878] asus_acpi: send /proc/acpi/dsdt to the developers
    [ 4.816300] iTCO_vendor_support: vendor-support=0
    [ 4.824448] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.06
    [ 4.824569] iTCO_wdt: Found a ICH9M TCO device (Version=2, TCOBASE=0x0860)
    [ 4.824660] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
    [ 4.827238] ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
    [ 4.827382] ACPI: AC Adapter [AC0] (on-line)
    [ 4.828155] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2
    [ 4.828165] ACPI: Sleep Button [SLPB]
    [ 4.828230] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input3
    [ 4.831492] ACPI: Lid Switch [LID]
    [ 4.831614] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
    [ 4.831621] ACPI: Power Button [PWRF]
    [ 4.865124] Linux agpgart interface v0.103
    [ 4.921369] cfg80211: Calling CRDA to update world regulatory domain
    [ 4.936814] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
    [ 4.936824] ACPI: Battery Slot [BAT0] (battery present)
    [ 4.941752] ATL1E 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
    [ 4.941770] ATL1E 0000:03:00.0: setting latency timer to 64
    [ 4.945788] thermal LNXTHERM:00: registered as thermal_zone0
    [ 4.945792] ACPI: Thermal Zone [THRM] (44 C)
    [ 4.970466] ACPI: acpi_idle registered with cpuidle
    [ 4.974411] Monitor-Mwait will be used to enter C-1 state
    [ 4.974445] Monitor-Mwait will be used to enter C-2 state
    [ 4.974469] Monitor-Mwait will be used to enter C-3 state
    [ 4.974477] Marking TSC unstable due to TSC halts in idle
    [ 4.975874] Switching to clocksource hpet
    [ 5.032723] agpgart-intel 0000:00:00.0: Intel GM45 Chipset
    [ 5.032822] agpgart-intel 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable
    [ 5.033439] agpgart-intel 0000:00:00.0: detected 32768K stolen memory
    [ 5.033728] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
    [ 5.105663] [drm] Initialized drm 1.1.0 20060810
    [ 5.107962] ath9k 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
    [ 5.107977] ath9k 0000:02:00.0: setting latency timer to 64
    [ 5.142586] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    [ 5.142593] i915 0000:00:02.0: setting latency timer to 64
    [ 5.159185] ath: EEPROM regdomain: 0x60
    [ 5.159188] ath: EEPROM indicates we should expect a direct regpair map
    [ 5.159191] ath: Country alpha2 being used: 00
    [ 5.159193] ath: Regpair used: 0x60
    [ 5.168070] i915 0000:00:02.0: irq 44 for MSI/MSI-X
    [ 5.168078] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
    [ 5.168080] [drm] Driver supports precise vblank timestamp query.
    [ 5.168129] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
    [ 5.191736] ieee80211 phy0: Selected rate control algorithm 'ath9k_rate_control'
    [ 5.192424] Registered led device: ath9k-phy0
    [ 5.192433] ieee80211 phy0: Atheros AR9285 Rev:2 mem=0xf81a0000, irq=17
    [ 5.288322] asus_laptop: Asus Laptop Support version 0.42
    [ 5.288486] asus_laptop: K50IJ model detected
    [ 5.288978] asus_laptop: Backlight controlled by ACPI video driver
    [ 5.289084] input: Asus Laptop extra buttons as /devices/platform/asus_laptop/input/input5
    [ 5.393429] sd 0:0:0:0: Attached scsi generic sg0 type 0
    [ 5.393627] sr 1:0:0:0: Attached scsi generic sg1 type 5
    [ 5.597755] psmouse serio4: ID: 10 00 64
    [ 5.702553] elantech: assuming hardware version 2, firmware version 4.1.1
    [ 5.738839] elantech: Synaptics capabilities query result 0x7e, 0x13, 0x0d.
    [ 5.780864] fbcon: inteldrmfb (fb0) is primary device
    [ 5.825826] Console: switching to colour frame buffer device 170x48
    [ 5.831063] fb0: inteldrmfb frame buffer device
    [ 5.831065] drm: registered panic notifier
    [ 5.833323] ACPI Warning: _BQC returned an invalid level (20110413/video-473)
    [ 5.834567] acpi device:38: registered as cooling_device2
    [ 5.834817] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input6
    [ 5.834975] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
    [ 5.835272] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
    [ 5.835329] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
    [ 5.835420] HDA Intel 0000:00:1b.0: irq 45 for MSI/MSI-X
    [ 5.835458] HDA Intel 0000:00:1b.0: setting latency timer to 64
    [ 5.840235] input: ETPS/2 Elantech Touchpad as /devices/platform/i8042/serio4/input/input7
    [ 6.069285] Linux media interface: v0.10
    [ 6.088833] Linux video capture interface: v2.00
    [ 6.097205] uvcvideo: Found UVC 1.00 device CNF7129 (04f2:b071)
    [ 6.120085] input: CNF7129 as /devices/pci0000:00/0000:00:1a.7/usb1/1-3/1-3:1.0/input/input8
    [ 6.120179] usbcore: registered new interface driver uvcvideo
    [ 6.120181] USB Video Class driver (v1.1.0)
    [ 7.622339] EXT4-fs (sda1): re-mounted. Opts: (null)
    [ 7.907480] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
    [ 7.987363] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
    [ 8.044201] Adding 4213756k swap on /dev/sda5. Priority:-1 extents:1 across:4213756k
    Xorg.0.log:
    [ 25.092]
    This is a pre-release version of the X server from The X.Org Foundation.
    It is not supported in any way.
    Bugs may be filed in the bugzilla at http://bugs.freedesktop.org/.
    Select the "xorg" product for bugs you find in this release.
    Before reporting bugs in pre-release versions please check the
    latest version in the X.Org Foundation git repository.
    See http://wiki.x.org/wiki/GitPage for git access instructions.
    [ 25.092]
    X.Org X Server 1.10.3.901 (1.10.4 RC 1)
    Release Date: 2011-07-29
    [ 25.092] X Protocol Version 11, Revision 0
    [ 25.092] Build Operating System: Linux 3.0.0-ARCH i686
    [ 25.092] Current Operating System: Linux saso-laptop 3.0-ARCH #1 SMP PREEMPT Sat Aug 6 16:49:00 CEST 2011 i686
    [ 25.093] Kernel command line: root=/dev/sda1 ro quiet
    [ 25.093] Build Date: 08 August 2011 08:28:07AM
    [ 25.093]
    [ 25.093] Current version of pixman: 0.22.2
    [ 25.093] Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
    [ 25.093] Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    [ 25.093] (==) Log file: "/var/log/Xorg.0.log", Time: Tue Aug 9 18:57:17 2011
    [ 25.215] (==) Using config directory: "/etc/X11/xorg.conf.d"
    [ 25.248] (==) No Layout section. Using the first Screen section.
    [ 25.248] (==) No screen section available. Using defaults.
    [ 25.248] (**) |-->Screen "Default Screen Section" (0)
    [ 25.248] (**) | |-->Monitor "<default monitor>"
    [ 25.248] (==) No monitor specified for screen "Default Screen Section".
    Using a default monitor configuration.
    [ 25.248] (==) Automatically adding devices
    [ 25.248] (==) Automatically enabling devices
    [ 25.303] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
    [ 25.303] Entry deleted from font path.
    [ 25.339] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
    [ 25.339] Entry deleted from font path.
    [ 25.339] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
    [ 25.340] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
    [ 25.340] Entry deleted from font path.
    [ 25.340] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
    [ 25.340] (==) FontPath set to:
    /usr/share/fonts/misc/,
    /usr/share/fonts/TTF/,
    /usr/share/fonts/Type1/
    [ 25.340] (==) ModulePath set to "/usr/lib/xorg/modules"
    [ 25.340] (II) The server relies on udev to provide the list of input devices.
    If no devices become available, reconfigure udev or disable AutoAddDevices.
    [ 25.340] (II) Loader magic: 0x822e4e0
    [ 25.340] (II) Module ABI versions:
    [ 25.340] X.Org ANSI C Emulation: 0.4
    [ 25.340] X.Org Video Driver: 10.0
    [ 25.340] X.Org XInput driver : 12.2
    [ 25.340] X.Org Server Extension : 5.0
    [ 25.341] (--) PCI:*(0:0:2:0) 8086:2a42:1043:1862 rev 9, Mem @ 0xfe400000/4194304, 0xd0000000/268435456, I/O @ 0x0000dc00/8
    [ 25.341] (--) PCI: (0:0:2:1) 8086:2a43:1043:1862 rev 9, Mem @ 0xfe800000/1048576
    [ 25.341] (II) Open ACPI successful (/var/run/acpid.socket)
    [ 25.341] (II) LoadModule: "extmod"
    [ 25.358] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
    [ 25.373] (II) Module extmod: vendor="X.Org Foundation"
    [ 25.373] compiled for 1.10.3.901, module version = 1.0.0
    [ 25.373] Module class: X.Org Server Extension
    [ 25.373] ABI class: X.Org Server Extension, version 5.0
    [ 25.373] (II) Loading extension MIT-SCREEN-SAVER
    [ 25.373] (II) Loading extension XFree86-VidModeExtension
    [ 25.373] (II) Loading extension XFree86-DGA
    [ 25.374] (II) Loading extension DPMS
    [ 25.374] (II) Loading extension XVideo
    [ 25.374] (II) Loading extension XVideo-MotionCompensation
    [ 25.374] (II) Loading extension X-Resource
    [ 25.374] (II) LoadModule: "dbe"
    [ 25.374] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
    [ 25.387] (II) Module dbe: vendor="X.Org Foundation"
    [ 25.387] compiled for 1.10.3.901, module version = 1.0.0
    [ 25.387] Module class: X.Org Server Extension
    [ 25.387] ABI class: X.Org Server Extension, version 5.0
    [ 25.387] (II) Loading extension DOUBLE-BUFFER
    [ 25.387] (II) LoadModule: "glx"
    [ 25.387] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
    [ 25.411] (II) Module glx: vendor="X.Org Foundation"
    [ 25.411] compiled for 1.10.3.901, module version = 1.0.0
    [ 25.411] ABI class: X.Org Server Extension, version 5.0
    [ 25.411] (==) AIGLX enabled
    [ 25.411] (II) Loading extension GLX
    [ 25.411] (II) LoadModule: "record"
    [ 25.411] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
    [ 25.412] (II) Module record: vendor="X.Org Foundation"
    [ 25.412] compiled for 1.10.3.901, module version = 1.13.0
    [ 25.412] Module class: X.Org Server Extension
    [ 25.412] ABI class: X.Org Server Extension, version 5.0
    [ 25.412] (II) Loading extension RECORD
    [ 25.412] (II) LoadModule: "dri"
    [ 25.412] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
    [ 25.420] (II) Module dri: vendor="X.Org Foundation"
    [ 25.420] compiled for 1.10.3.901, module version = 1.0.0
    [ 25.420] ABI class: X.Org Server Extension, version 5.0
    [ 25.420] (II) Loading extension XFree86-DRI
    [ 25.420] (II) LoadModule: "dri2"
    [ 25.420] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
    [ 25.428] (II) Module dri2: vendor="X.Org Foundation"
    [ 25.428] compiled for 1.10.3.901, module version = 1.2.0
    [ 25.428] ABI class: X.Org Server Extension, version 5.0
    [ 25.429] (II) Loading extension DRI2
    [ 25.429] (==) Matched intel as autoconfigured driver 0
    [ 25.429] (==) Matched vesa as autoconfigured driver 1
    [ 25.429] (==) Matched fbdev as autoconfigured driver 2
    [ 25.429] (==) Assigned the driver to the xf86ConfigLayout
    [ 25.429] (II) LoadModule: "intel"
    [ 25.429] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
    [ 25.448] (II) Module intel: vendor="X.Org Foundation"
    [ 25.448] compiled for 1.10.2, module version = 2.15.0
    [ 25.448] Module class: X.Org Video Driver
    [ 25.448] ABI class: X.Org Video Driver, version 10.0
    [ 25.448] (II) LoadModule: "vesa"
    [ 25.449] (WW) Warning, couldn't open module vesa
    [ 25.449] (II) UnloadModule: "vesa"
    [ 25.449] (II) Unloading vesa
    [ 25.449] (EE) Failed to load module "vesa" (module does not exist, 0)
    [ 25.451] (II) LoadModule: "fbdev"
    [ 25.451] (WW) Warning, couldn't open module fbdev
    [ 25.451] (II) UnloadModule: "fbdev"
    [ 25.451] (II) Unloading fbdev
    [ 25.451] (EE) Failed to load module "fbdev" (module does not exist, 0)
    [ 25.453] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
    i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G,
    E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
    965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
    4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale,
    Sandybridge Desktop (GT1), Sandybridge Desktop (GT2),
    Sandybridge Desktop (GT2+), Sandybridge Mobile (GT1),
    Sandybridge Mobile (GT2), Sandybridge Mobile (GT2+),
    Sandybridge Server, Ivybridge Mobile (GT1), Ivybridge Mobile (GT2),
    Ivybridge Desktop (GT1), Ivybridge Desktop (GT2), Ivybridge Server
    [ 25.454] (--) using VT number 7
    [ 25.461] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
    [ 25.461] drmOpenDevice: node name is /dev/dri/card0
    [ 25.461] drmOpenDevice: open result is 9, (OK)
    [ 25.462] drmOpenByBusid: Searching for BusID pci:0000:00:02.0
    [ 25.462] drmOpenDevice: node name is /dev/dri/card0
    [ 25.462] drmOpenDevice: open result is 9, (OK)
    [ 25.462] drmOpenByBusid: drmOpenMinor returns 9
    [ 25.462] drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
    [ 25.462] (II) intel(0): Creating default Display subsection in Screen section
    "Default Screen Section" for depth/fbbpp 24/32
    [ 25.462] (==) intel(0): Depth 24, (--) framebuffer bpp 32
    [ 25.462] (==) intel(0): RGB weight 888
    [ 25.462] (==) intel(0): Default visual is TrueColor
    [ 25.462] (II) intel(0): Integrated Graphics Chipset: Intel(R) GM45
    [ 25.462] (--) intel(0): Chipset: "GM45"
    [ 25.462] (**) intel(0): Relaxed fencing enabled
    [ 25.462] (**) intel(0): Framebuffer tiled
    [ 25.462] (**) intel(0): Pixmaps tiled
    [ 25.462] (**) intel(0): 3D buffers tiled
    [ 25.462] (**) intel(0): SwapBuffers wait enabled
    [ 25.462] (==) intel(0): video overlay key set to 0x101fe
    [ 25.462] (II) intel(0): Output LVDS1 has no monitor section
    [ 25.462] (II) intel(0): found backlight control interface /sys/class/backlight/acpi_video0
    [ 25.480] (II) intel(0): Output VGA1 has no monitor section
    [ 26.013] (II) intel(0): Output HDMI1 has no monitor section
    [ 26.014] (II) intel(0): Output DP1 has no monitor section
    [ 26.015] (II) intel(0): Output DP2 has no monitor section
    [ 26.015] (II) intel(0): EDID for output LVDS1
    [ 26.015] (II) intel(0): Manufacturer: LGD Model: 1e8 Serial#: 0
    [ 26.015] (II) intel(0): Year: 2008 Week: 0
    [ 26.015] (II) intel(0): EDID Version: 1.3
    [ 26.015] (II) intel(0): Digital Display Input
    [ 26.015] (II) intel(0): Max Image Size [cm]: horiz.: 34 vert.: 19
    [ 26.015] (II) intel(0): Gamma: 2.20
    [ 26.015] (II) intel(0): No DPMS capabilities specified
    [ 26.015] (II) intel(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
    [ 26.015] (II) intel(0): First detailed timing is preferred mode
    [ 26.015] (II) intel(0): redX: 0.618 redY: 0.355 greenX: 0.335 greenY: 0.584
    [ 26.015] (II) intel(0): blueX: 0.150 blueY: 0.102 whiteX: 0.313 whiteY: 0.329
    [ 26.015] (II) intel(0): Manufacturer's mask: 0
    [ 26.015] (II) intel(0): Supported detailed timing:
    [ 26.015] (II) intel(0): clock: 72.3 MHz Image Size: 344 x 194 mm
    [ 26.015] (II) intel(0): h_active: 1366 h_sync: 1414 h_sync_end 1446 h_blank_end 1526 h_border: 0
    [ 26.015] (II) intel(0): v_active: 768 v_sync: 771 v_sync_end 776 v_blanking: 790 v_border: 0
    [ 26.015] (II) intel(0): LG Display
    [ 26.015] (II) intel(0): LP156WH2-TLA1
    [ 26.015] (II) intel(0): EDID (in hex):
    [ 26.015] (II) intel(0): 00ffffffffffff0030e4e80100000000
    [ 26.015] (II) intel(0): 00120103802213780a4e859e5b559526
    [ 26.015] (II) intel(0): 1a505400000001010101010101010101
    [ 26.015] (II) intel(0): 0101010101013e1c56a0500016303020
    [ 26.015] (II) intel(0): 350058c2100000190000000000000000
    [ 26.015] (II) intel(0): 00000000000000000000000000fe004c
    [ 26.015] (II) intel(0): 4720446973706c61790a2020000000fe
    [ 26.016] (II) intel(0): 004c503135365748322d544c4131004d
    [ 26.016] (II) intel(0): EDID vendor "LGD", prod id 488
    [ 26.016] (II) intel(0): Printing DDC gathered Modelines:
    [ 26.016] (II) intel(0): Modeline "1366x768"x0.0 72.30 1366 1414 1446 1526 768 771 776 790 -hsync -vsync (47.4 kHz)
    [ 26.016] (II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
    [ 26.016] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
    [ 26.016] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
    [ 26.016] (II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
    [ 26.016] (II) intel(0): Not using default mode "640x480" (doublescan mode not supported)
    [ 26.016] (II) intel(0): Not using default mode "640x512" (doublescan mode not supported)
    [ 26.016] (II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
    [ 26.016] (II) intel(0): Not using default mode "896x672" (doublescan mode not supported)
    [ 26.016] (II) intel(0): Not using default mode "928x696" (doublescan mode not supported)
    [ 26.016] (II) intel(0): Not using default mode "960x720" (doublescan mode not supported)
    [ 26.016] (II) intel(0): Not using default mode "700x525" (doublescan mode not supported)
    [ 26.016] (II) intel(0): Not using default mode "1024x768" (doublescan mode not supported)
    [ 26.016] (II) intel(0): Printing probed modes for output LVDS1
    [ 26.016] (II) intel(0): Modeline "1366x768"x60.0 72.30 1366 1414 1446 1526 768 771 776 790 -hsync -vsync (47.4 kHz)
    [ 26.016] (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
    [ 26.016] (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
    [ 26.016] (II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
    [ 26.016] (II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
    [ 26.033] (II) intel(0): EDID for output VGA1
    [ 26.566] (II) intel(0): EDID for output HDMI1
    [ 26.567] (II) intel(0): EDID for output DP1
    [ 26.568] (II) intel(0): EDID for output DP2
    [ 26.568] (II) intel(0): Output LVDS1 connected
    [ 26.568] (II) intel(0): Output VGA1 disconnected
    [ 26.568] (II) intel(0): Output HDMI1 disconnected
    [ 26.568] (II) intel(0): Output DP1 disconnected
    [ 26.568] (II) intel(0): Output DP2 disconnected
    [ 26.568] (II) intel(0): Using exact sizes for initial modes
    [ 26.568] (II) intel(0): Output LVDS1 using initial mode 1366x768
    [ 26.568] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
    [ 26.568] (II) intel(0): Kernel page flipping support detected, enabling
    [ 26.568] (**) intel(0): Display dimensions: (340, 190) mm
    [ 26.568] (**) intel(0): DPI set to (102, 102)
    [ 26.568] (II) Loading sub module "fb"
    [ 26.569] (II) LoadModule: "fb"
    [ 26.569] (II) Loading /usr/lib/xorg/modules/libfb.so
    [ 26.584] (II) Module fb: vendor="X.Org Foundation"
    [ 26.584] compiled for 1.10.3.901, module version = 1.0.0
    [ 26.584] ABI class: X.Org ANSI C Emulation, version 0.4
    [ 26.584] (II) Loading sub module "dri2"
    [ 26.585] (II) LoadModule: "dri2"
    [ 26.585] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
    [ 26.585] (II) Module dri2: vendor="X.Org Foundation"
    [ 26.585] compiled for 1.10.3.901, module version = 1.2.0
    [ 26.585] ABI class: X.Org Server Extension, version 5.0
    [ 26.585] (==) Depth 24 pixmap format is 32 bpp
    [ 26.585] (II) intel(0): [DRI2] Setup complete
    [ 26.585] (II) intel(0): [DRI2] DRI driver: i965
    [ 26.585] (II) intel(0): Allocated new frame buffer 1408x768 stride 5632, tiled
    [ 26.600] (II) UXA(0): Driver registered support for the following operations:
    [ 26.600] (II) solid
    [ 26.600] (II) copy
    [ 26.600] (II) composite (RENDER acceleration)
    [ 26.600] (II) put_image
    [ 26.600] (II) get_image
    [ 26.600] (==) intel(0): Backing store disabled
    [ 26.600] (==) intel(0): Silken mouse enabled
    [ 26.601] (II) intel(0): Initializing HW Cursor
    [ 26.613] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
    [ 26.614] (==) intel(0): DPMS enabled
    [ 26.614] (==) intel(0): Intel XvMC decoder enabled
    [ 26.614] (II) intel(0): Set up textured video
    [ 26.614] (II) intel(0): [XvMC] xvmc_vld driver initialized.
    [ 26.614] (II) intel(0): direct rendering: DRI2 Enabled
    [ 26.614] (==) intel(0): hotplug detection: "enabled"
    [ 26.614] (--) RandR disabled
    [ 26.614] (II) Initializing built-in extension Generic Event Extension
    [ 26.614] (II) Initializing built-in extension SHAPE
    [ 26.614] (II) Initializing built-in extension MIT-SHM
    [ 26.614] (II) Initializing built-in extension XInputExtension
    [ 26.614] (II) Initializing built-in extension XTEST
    [ 26.614] (II) Initializing built-in extension BIG-REQUESTS
    [ 26.614] (II) Initializing built-in extension SY

    Sorry for that. I had some issues with reproducing the problem. It seems that i can reproduce it only on fresh restart.
    Last edited by Shark (2011-08-09 18:27:10)

  • Apps crash when MacBook not connected to external monitor

    I have been using my macbook connected to a Samsung T240M 24 inch monitor/tv for several months now with no problems at all until 2 days ago. Everything functions perfectly when the computer is connected to the external monitor, however, when I disconnect it and go mobile with my computer, almost every application I try to use crashes with the single exception that I've found so far being Firefox.
    Does anybody have any clue what could be causing this bizarre behaviour? I've tried different display settings when not connected to the external monitor to no avail. PLEASE HELP!!!!

    dude...that question is barely worthy of a response!!! Of course I have! I also shut it right down before disconnected the monitor.
    I'm thinking this will be the thing that finally makes me get off my lazy butt and upgrade to Leopard (hoping that will fix the problem)! It's such a strange thing to just start happening after months of no problems at all.

  • Rotate external Monitor on T60

    Is is possible to rotate an external monitor on a T60 running XP?
    Thanks in advance for any help.
    David
    Moderator Note; please update your profile with your correct country location as per the forum rules. Products, options and services vary from market to market. Knowing your location helps us help you
    Message Edited by andyP on 11-06-2008 11:26 PM

    I would suggest looking at the monitors manufacturer's web site for possible drivers or software.
    I read an article from a very old OS "how to" that if you held down the option key while opening System Preferences and continued to hold the option key while you selected Displays, you might get an an option to rotate. I can't test it since I don't have an external monitor.

  • Betreff: T440s - Only 1024x768 on external monitor (DVI, Ultra Dock, Win8.1/Win7)

    EDIT NOTE: This message was moved to the top of the thread in order to assist us with an escalation. For all future post and commments please continue posting in this thread.
    One more victim here.  T440s (fully patched, UltraDock, lid closed, external TrackPoint keyboard), Win8.1 (fully patched), HDMI, Acer T232HL touchscreen monitor.
     Volcomtx85's posting (over 50% failure rate in a corporate setting) should warrant some attention.
    Since there is a mix of Win7, Win8 and Win8.1 in the thread (presumably with different drivers), and different modes of monitor connectivity, the two points of commonality in the reports would seem to be BIOS and motherboard hardware.  If so, let's hope it's the BIOS.
    Solved!
    Go to Solution.

    Hello,
    I have a T440s sitting in the Ultra Dock and a Samsung 2343bw hooked up by DVI.
    On both Windows 8.1 and Windows 7 I can only set the resolution of the external screen to 1024x768. When I select  a higher resolution, both internal and external monitor go black for a couple of seconds and when the desktop comes back it's still 1024x768 on the external monitor. I tried the following three drivers:
    1) Deinstall display driver manually and let Win 8.1 pick a driver automatically, version 10.18.10.3318 (03-Oct-2013) gets installed. With this driver, both displays can be set to their native resolution. Unfortunately, the external display goes black once in a while and switches back on after 3 sec. The monitor itself is unlikely to be faulty, since it works well on my T400(+Dock). 
    2) Install driver from Lenovo driver matrix, you'll get 10.18.10.3282. With this driver, the external monitor only displays 1024x768 as described above. 
    3) Get the driver for HD 4400 from Intel website. It doesn't install voluntarily, but there is a workaround: http://www.intel.com/support/graphic...hd+4400+driver
    I tried it and only get 1024x768 on the external display, just as with driver (2). If I connect the monitor by VGA, I get the blinking-error described in (1).
    Hence, the external monitor is not usable, what is highly unsatisfying.
    Can anyone confirm the Issue/problem? Is there a solution?
    thanks,
    niclas
    PS:
    - Bios of T440s is updated
    - I installed the monitor driver from Samsung
    - (1) is not an option in Win 7, only on Win8.1, since Win 7 doesn't find any driver for this card
    - I am happy to provide further information when needed
    - Edit: The screen works finde (DVI&VGA) on my T400 with dock.
    - Edit: If I connect the screen via VGA, no

  • T60 - external monitor

    I just installed a new 19 inch external monitor for my notebook T60.  I would like to use the new monitor exclusively and close my notebook, while I am working.  when I close my notebook, the new monitor goes into standby mode.
    what settings do I need to change?  thanks.
    Solved!
    Go to Solution.

    billryan37, welcome to the forum,
    you need to change the settings in power management, windows and Lenovo to be doubley safe, so that when closing the lid it does nothing rather than go into standby or something else.
    Hope this helps 
    Andy  ______________________________________
    Please remember to come back and mark the post that you feel solved your question as the solution, it earns the member + points
    Did you find a post helpfull? You can thank the member by clicking on the star to the left awarding them Kudos Please add your type, model number and OS to your signature, it helps to help you. Forum Search Option T430 2347-G7U W8 x64, Yoga 10 HD+, Tablet 1838-2BG, T61p 6460-67G W7 x64, T43p 2668-G2G XP, T23 2647-9LG XP, plus a few more. FYI Unsolicited Personal Messages will be ignored.
      Deutsche Community     Comunidad en Español    English Community Русскоязычное Сообщество
    PepperonI blog 

  • 17" crash when using external monitor.

    Since I bought this powerbook back in mid January I have been having problems with the computer crashing whenever it is connected to an external monitor. Usually the problem happens in either safari or terminal and ALWAYS happens when I use my scroll mouse.
    According to my system.log this is the error I receive once the computer crashes:
    Feb 9 18:09:34 Aluminum kernel[0]: ATIRadeon9700::waitfor_rbspace: Overflowed block waiting for FIFO space. Have 2, need 8. RBBM_STATUS 0x8401c100
    According to google this problem has been occurring since Panther.
    http://www.google.com/search?client=safari&rls=en&q=waitfor_rbspace&ie=UTF-8&oe=UTF-8
    I have done all the defacto mac troubleshooting (pram, permissions, sudo rm -rf /mach
    So far my problem has still remained unresolved. I am wondering if anyone else is having this problem. If so what monitor are you using? Does this happen regardless of having an external monitor attached? Do any ADC members know if 10.4.5 is going to have any ATI updates? Please help.

    Since I bought this powerbook back in mid January I have been having problems with the computer crashing whenever it is connected to an external monitor. Usually the problem happens in either safari or terminal and ALWAYS happens when I use my scroll mouse.
    According to my system.log this is the error I receive once the computer crashes:
    Feb 9 18:09:34 Aluminum kernel[0]: ATIRadeon9700::waitfor_rbspace: Overflowed block waiting for FIFO space. Have 2, need 8. RBBM_STATUS 0x8401c100
    According to google this problem has been occurring since Panther.
    http://www.google.com/search?client=safari&rls=en&q=waitfor_rbspace&ie=UTF-8&oe=UTF-8
    I have done all the defacto mac troubleshooting (pram, permissions, sudo rm -rf /mach
    So far my problem has still remained unresolved. I am wondering if anyone else is having this problem. If so what monitor are you using? Does this happen regardless of having an external monitor attached? Do any ADC members know if 10.4.5 is going to have any ATI updates? Please help.

  • GS70 Stealth Pro Crashes when using external monitor..

    Hi Guys,
    I just bought a GS70 ghost pro a few weeks ago and have been loving it, no problems, running Battlefield 3 and watchdogs..
    However I just bought an external monitor, Asus VG248QE, when i connected it via display port and tried to play Battlefield 3 on the external monitor the laptop crashed - both screens blank- fan on- power button went orange- had to hold down the power button to reset.
    Tried it again, opened Bf3 in window mode, put it on external monitor, went to full screen - it played ok for a few minutes then the laptop crashed again..
    I had played bf3 no problems on the laptop screen previously.
    Anyone got any ideas what might be going on? I'm new to gaming on pc so I'm a bit lost, any suggestions would be welcome.
    Thanks,
    Dan

    Which nvidia driver are you using? (latest one from nvidia GeFormce Experience or MSI website)
    Try to use the one from MSI website and update the latest VBIOS(80.04.F7.00.0C).
    http://www.msi.com/support/nb/GS70_2PE_Stealth_Pro.html#down-firmware&Win8.1 64
    step by step guide:http://www.msi.com/files/pdf/VBIOS_Update_under_DOS_mode_EN.pdf
    Can you check the CPU and GPU temperature under two situation? (1. when running without external monitor 2. using external monitor)

  • All opened applications crash when external monitor is attached in to MacBook Air 2013

    I experience crashes (automatical restarts) of all the applications when I attach external monitor. I have MacBook Air 13-inch mid 2013 and OS X 10.8.4 in spanish. The crashes are regular but not every time I attach monitor.
    Does anyone experience the same?
    Thanks,
    Jura

    The warranty entitles you to complimentary phone support for the first 90 days of ownership.
    If you bought the product in the U.S. directly from Apple (not from a reseller), you also have 14 days from the date of delivery in which to exchange or return it for a refund. In other countries, the return policy may be different. If you bought from a reseller, its return policy applies.

  • Shockwave Flash crashes when hooked up to an external monitor

    Hi,
    I believe I have finally pinpointed a problem with my Adobe Schockwave Flash plug-in. When I am hooked up to my external monitor and use my flash player, I receive a message saying:
    "The following plug-in has crashed: Adobe Shockwave Flash"
    I have no idea why this is; I have thoroughly searched for a solution to no avail.
    My computer:
    Alienware M11x R3
    Windows 7 Standard 64-bit
    Flash Version: WIN 11,0,1,152
    NVIDIA GeForce GT 540M
    Google Chrome 14.0.835.202m
    My Monitor:
    Alienware 2210
    --The driver software for this is up to date.
    The stranger thing is, it only crashes on Google Chrome. It doesn't crash on Internet Explorer, I do not know what kind of an issue. Does anyone know how to solve this issue? I can give any additional information if needed.
    Thanks,
    -Chris

    Have the same problem. It happens only with the new plugin in Chrome :
    Google Chrome
    14.0.835.202 (m)
    Betriebssystem
    Windows 7 SP1 64 bit
    Flash plugin
    11,0,1,152 C:\windows\SysWOW64\Macromed\Flash\NPSWF32.dll
    Stefan

  • IMac 27 working as external monitor on Win7 but are there drivers?

    Hi everybody,
    A short explaination what I am doing and what i want to do.
    I have a PC (only for gaming) connected to the iMac with an DisplayPort - MiniDisplayPort cable.
    Everything works great. I have the full resolution everything fine.
    My only question is, is there any driver out for the monitor of the iMac?
    The reason why I ask is, because in Win7 the iMac Monitor is set to 59Hz instead of 60Hz. It is also not possible to switch it to 60Hz cause it won't be accepted. It is listed as PNP-Monitor (Plug and Play).
    Is the driver included in the bootcamp drivers for win7? The display might be same to use as an cinema display in my opinion.
    Maybe someone can give me some usful tips.
    greetings,
    Tom

    Hello mchanna,
    I am currently using a normal mini displayport cable.
    Here is a link how it looks like:
    http://www.ditech.at/artikel/KDIPM02/Mini_DisplayPort_Kabel_2m_weiss.html
    In your case I think this should do it:
    http://store.apple.com/at/product/HA826ZM/A/belkin-mini-displayport-auf-hdmi-kab el-(4%C2%A0m)
    After attaching the cable to the iMac, normally it should autmatically switch to externel display mode.
    You can easily switch between iMac and external display with this command:
    CMD + F2
    You also need no drivers for the display. If you have windwos 7 or above, the iMac will be recognized as Apple Cinema Display or so.
    I using this setug over 2 years now.
    Works perfectly.
    I hope I could help you .
    If you have more questions, don't hesitate to ask .
    Greetings,
    Tom

  • Crashes when disconnecting external monitors

    I switched from a Windows laptop to a MacBook Pro for improved stability and superior sleep behavior, and it is better, except for one glaring exception: frequently when disconnecting an external monitor (using a DVI cable), it crashes by either locking up and requiring a manual restart or by immediately and abruptly rebooting. Has anyone else encountered similar problems and know of the solution?
    Here the 2 scenarious:
    1. MBP is on & closed & using an external DVI display which I then disconnect -> sometimes MBP crashes & powers-off or automatically restarts
    2. MBP is on & open & using both internal & external display & I unplug the external display -> sometimes MBP crashes & powers-off or automatically restarts
    The external monitors are Dell LCDs with DVI connectors.
    A workaround is to turn off the computer before disconnecting the external display but that is not much of a workaround because that defeats the objective of sleeping the computer.

    What are the symptoms when yours crashes/freezes?
    I have had my MBP lock up a few times, where the mouse cursor still moves around, but absolutely nothing responds. On the rare occasions when I've had another machine on the network I've been able to log in remotely, so it seems to be only the display locking up, not the entire machine.
    I'm not 100% sure, but this seems to happen usually only after I have connected the machine to an external display, so it could be related. It doesn't however happen immediately like it sounds like yours does, usually some hours later.
    As an aside, I hooked by old Titanium Powerbook up to an external display several times a week for about 2 years. I never put it asleep to do this, and never had a single problem doing this at all.
    TiBook 800, MacBook Pro 2GHz   Mac OS X (10.4.5)  

Maybe you are looking for

  • The first upload takes ages! even after connected

    Hi all, I have noticed a little issue I have when uploading a single file to the remote server via SFTP, The first upload will take ages about 30 secs before completing. The activity icon will stop on one quarter for this time and then complete when

  • Processing SGML file in XI / PI possible?

    Hello all, we want to process an SGML file through XI / PI. The problem is that the SGML has tags in that are not closed like this: <aaa attribute="..."...> ... </aaa> <bbb attribute="..."> <ccc attribute="..."...> ... </ccc> my first idea was to rea

  • Wait for commit to finish

    Hello, I am calling a standard function that update some tables and at the end execute a commit work without the wait clause, but right after the execution of the standard function I need to perform some operations that needs all the tables to be upd

  • Timed Function Help Needed

    Hi everyone. I trying to work out how to run a function after 5 seconds. All i'm trying to do is make some text dropdown after a set time. Here's my code so far: Code: import fl.transitions.easing.*; import fl.transitions.Tween; var myText:TextField

  • Keyboard not reponding

    Hello I wanted to have my hotkeys working, so I followed this guide: http://linux.oneandoneis2.org/keys.htm But about 3 minutes after I finnished, my keyboard wouldnt respond. I had already used that guide on puppy linux, so there wasnt anything new,