T6060 volume problem

A friend of mine recently bought a set of T6060 5.1 speakers. Unfortunately, when using them he was unable to use something else on his pc bcause the speakers used the line-in socket. We did a trade (I had some 2.1 speakers) and he warned me that the remote volume control was very sensetive. Biggest understatement of all time. When I turn them on, I get no sound at all untill just after the number 2 on the dial. This is with computer volume on full. By about 2 /4 the sound is there, but not exactly loud. The music I listen to sounds best at a fairly loud volume so this is annoying. By 2 /3, just one little notch on the slider/dial thing, the volume is at full. For experimental purposes and so as to not make myself deaf, I turned the computer volume down quite low. Moving the dial between 2 /3 and max (or the equivalent of 10) make no difference at all. It is impossible to get the voulme at a suitable level for both listening to music and playing games. My friend suggested that I simply alter the volume in windows if it gets too loud, but if I have to minimise a game eery time I want to do this it will get very annoying, espeically when the remote should do the job.
Is there any way to fix this? Do I have to order a new remote (and where from?) or should I get the receipt (he still has it) and get the whole system replaced?
The soundcard I am using is a Sound Blaster Audigy ZX.
thanks.

I also have a set of T6060 5.1 speakers and they work perfectly! But your friend's right when he advised you to handle the remote control with caution, because they are a bit sensitive! I'm not sure as to whether the problem lies on your remote or your computer but if he has got the receipt, make sure you ask him to bring it for you in case of problems with your speakers! Now, what I advise you to do is to contact your customer support, because they are always quick when it comes to answering your e-mails! Also, contact them by phone to make sure that everyone knows your situation. Now, I have owned a lot of Creative speakers, but none of them had errors within the remote, so I think the problem relies on your computer, so check your sound settings and make sure that you have connected your speakers correctly and follow the guide that you recieved with your box. Another thing that you should note is, that you should not turn up the bass volume too much. Use it with caution, because you might break it if you play too wiht too loud bass! I have experienced that once with my P580 5.1 speaker system. I had to contact the support and they sended me a brand new one.
Good Luck! If you encounter any more problems, I will be happy to help you on my e-mail adress ([email protected]) or on this forum!

Similar Messages

Anyone know when Apple will bring out a patch to fix the volume problem you get on mac mini after downloading OS 10.8.5

Anyone know when Apple will bring out a patch to fix the volume problem you get on mac mini after downloading OS 10.8.5?

Only Apple knows the answer to whether or not there is a verified problem and if so when will a fix be released. As is their custom, Apple does not talk about these things and the rules of these communities prohibit speculation about future udates or upgrades. It is probably safe to say if a fix is deemed necessary it will be called OS X 10.8.6.

Trying to backup despite Volume problems

I appear to have some volume problems with my internal HDD.
When I try to diagnose and fix it with Disk Utility the error is:
"Incorrect number of thread records" & "Invalid volume directory count"
Though the volume needs repairing, disk utility can't do it (nor can TechTool Pro http://www.micromat.com/index.php?option=com_simpleboard&Itemid=42&func=view&id= 525&catid=6)
Since I can't fix it I think I understand that it would be best to back things up, reformat the drive.
My question is esssentially academic. Would backing things up copy the volume problem I'm experiencing? or would it even allow me to copy things correctly? And how does one know what file was damaged or corrupted?

Good questions. Repairing the HD problem is something Disk Warrior could possibly correct. It's the best app. for resolving directory problems.
Did Disk Utility specifically tell you that it couldn't fix the drive, or did it simply report the error. If it's the latter, I would rerun Disk Utility as many times as necessary to get a clean run (no problems). This may not be possible given what was reported in your Micromat referenced link, however, it's worth a try.
Given the current state of the directory, you would not be able to create a clean clone backup of the drive. I suspect you would see an error during the copying. You could though drag/drop specific folders/files to the drive to the extent your HD cooperates. IMO, a "must" for any maintenance strategy.
Do you have a current cloned backup of your system. If you do, you could always copy it over the existing drive. If it is "somewhat current", you could drag/drop important data files on your computer's HD to either external media or another parition on the external, then recopy the clone to the HD. Afterward, move the data files back to their original locations.

Audio volume problem in Premiere elements 12

How can I reduce or increase volume in the soundtrack???

Sorry for my English but I hope you understandthe following.
I have for the moment no time to go through your comments and ideas, but I certainly will do the coming days.
For good order I’ll explain my problem more in detail: (working with Window’s 7)
When I use Tools>smartmix, I change Audio 1 in “forground”, Comments in “foreground”, Soundtrack in “Background”, Audio 2 and 3 in “Background”. So far so good!.
Next step is: edit>preferences>audio>smartmixer, and the only thing I can change is “milliseconds (i.e. 10)”, “mix pause (i.e. 5 sec)”, and “reduce background in % (i.e. 90%)”. So far so good again!
The volume sound of the audio track is indeed reduced when there is a conversation in the clip, but not enough, so still too loud, certainly when the conversation stops, the volume sound is far too loud.
What do I want:
a) Remain the original volume from the conversations etc. in the clip, so don’t change anything in here.
b) Reduce the volume to the level I like!
I realise, this looks an easy and simple question, but I can’t fide out hou too lower only the volume in a soudtrack!
Waiting your reply and many thanks in advance
Regards
P.Gans
Van: A.T. Romano [email protected]
Verzonden: vrijdag 10 januari 2014 4:05
Aan: Maauwtje22
Onderwerp: Audio volume problem in Premiere elements 12
Re: Audio volume problem in Premiere elements 12
created by A.T. Romano <http://forums.adobe.com/people/A.T.+Romano> in Premiere Elements - View the full discussion <http://forums.adobe.com/message/5999094#5999094

Volume problem in IOS x Yosemite

Hi ,
I have problem in the volume when I download x Yosemite , the volume icon in keyboard not appear instead it take a way the window that Im open up .
( this happen when I click decrease volume , but when I click mute or increase volume nothing happened ) in all it doesn't appear in display icon sound .
My laptop is Mac book pro retina 13 inch mid 2014 :
The processor is 2.6 GHZ Intel core i5
Memory : 8 GB 1600 Hmz
version of Yosemite os 10.10.2
When I was download it to took me a lot of time .
What suggestions that could help the volume problem ??

Below are several links which you may like to try the various solutions as listed
os X yosemite keyboard volume not working
http://www.iphonetopics.com/no-sound-after-upgrading-to-os-x-yosemite/
http://apple.stackexchange.com/questions/151045/why-is-the-audio-is-not-working- after-upgrading-to-yosemite
http://apple.stackexchange.com/questions/152649/sound-not-working-when-running-o s-10-yosemite

IPod Shuffle 3rd Gen - Volume problems

I have an iPod Shuffle 3rd gen.
This week it started to develop a problem that I am not able to turn the volume uo or down.
I tested with another earphone and a brand new earpod (that are working properly in an iPhone 4S).
I also tried to restore the iPod. And this have note hekped me.
What should I do to fix this volume issue?
Thanks

Hey paralelopipak,
Thanks for the question. After reviewing your post, it sounds like the headphones have a volume problem only on this iPod. I would recommend that you read this article, it may be able to help you resolve or isolate the issue.
Resetting iPod shuffle
Thanks for using Apple Support Communities.
Have a nice day,
Mario

Iphone 3gs Speaker Low Volume Problem.

I Have Iphone 3gs. When I Updated It To 6.1.3 The Speaker Low Volume Problem Starts. When Anybody Call us It Rings But When We Accept The Call The Low Voiume Problem Starts. So Please Help Me To Fix This Problem.

Nope. Can't say that it does. I think I have about 100 charge cycles on it and it still performs like near new. How long have you had your 3GS?

Continuing Speakerphone Volume Problem

After anxiously waiting three months for a firmware/software update that would fix the speakerphone volume problem I updated my two iPhones to v. 1.1.1. Unfortunately, neither of my iphones showed any increase in speakerphone volume.
We spoke to an Apple employee at our nearest Apple store (also the biggest and busiest Apple store in our area), and found out that if we wanted a speakerphone that we could use we should bring the phones in and have the Genius verify the low volume and give us a "part substitution" (which meant an opened iphone).
Instead (for various reasons) we decided to buy another IPhone, figuring "what are the chances that we would get three iPhones with very low speakerphones?" Also figuring that this very busy Apple store would have the latest IPhones available, with the speakerphone volume fixed. Apparently three is not the charm. Our new iPhone's speakerphone volume was just as low as our other two iPhones.
And our newest iPhone had the 1.1.1 update on it from the start. So I guess we will now try option (1).
For those of you who have had problems with the speakerphone volume and brought the IPhone back to the Apple store, were you able to find one with good speakerphone volume? I sure hope so!
Thanks!
Ashley

When people started complaining initially about the speakerphone issue. I brought my phone to my local Apple Store and the guy at the Genius Bar and I compared the speakerphone volume with the display phones. We did notice that mine was quieter than the rest. Because my phone was past the 14 day return period, my phone was sent out.
In all honesty, if there was an improvement, I would say it's very minimal. Long story short, I was able to swap out my phone for a brand new one and the speaker volume is relatively the same. Did the firmware 1.1.1 make it any louder? Not really. What I do notice is that the alert volumes have improved and that volume went up. But the speakerphone volume remained unchanged.
Personally this phone wasn't built for speakerphone use and you'll do better buying a bluetooth headset or a speakerphone instead. It's acceptable in a quiet environment but trying to use the speakerphone in public is out of the question.

T6060 Volume control problem

Hi,
I currently have T6060 speaker system. The volume contron in that system has some loose contact. Because of that one of the satellite speaker is not producing sound. If i touch the volume control it's producing. I'm still under warranty. But can i get a new volume control. Firvin

Try inserting and removing your headphones 7 or 8 times. Also try cleaning out the jack in case any debris or fluff has built up in there.

T6060 possible problem/error of production...Central speaker is weaker and faded than the others

I just noticed on my recently bought t6060 that the center speaker sounds weaker and faded compared to the other satellites. what might be the problem? i know that the center speaker is intended for voice reproduction in 5.1 streams. On dvd playback i hear the voices, but not as clearly as other sounds that are reproduced by the satellites. When testing the speakers, when naming each channel, the center speaker is softer, faded and weaker than the others. Is it normal to be this way or do I have to return the product to service? Please tell me what to do...if there is anymore testing to be done, or if this is the normal way it should sound.
I tried to connect one of the other 8 watt satellites to the center connector, and it sounds perfectly clear, so there should be good audio output on the center channel, but when i connected the central speaker, which is 8 watts of power in the place of the speaker that i had unplugged earlier before, the central speaker sounded as soft, weak and fade as before. What is the problem? Do I have a defective central speaker? Please guide me what to do. I am kinda disapointed by all this. I have a Creative Live! 7.1 24 bit which works fine and also a Creative MuVo V200 512 MB, and i am very pleased with both of them. That's why I chose Creative for my 5.1 speaker system. Help, please. Thank you very much for your earliest attention.

there was a real faulty center speaker, they've aknowledged the problem and they changed the whole system with a brand new one, which works pretty good. SOme things i have noticed comparing the two packages. I am afraid that the first set that i got was some sort of an RMA product that had been fixed, because although the seals were intact, and the inner boxes seemed new, but the small plastic bags that contained the speakers were somehow damaged and the speakers were not that well packed as this new set that i got a few days ago. The thing that i noticed, unfortunately is that i have now the same problem as SMSMASTERS reported, the fluctuation of the volume. It is perceptible, but after a little bit of fine listening. It's definitely there... I frankly am dissapointed in Creative for not being able to make a good solid product. And how could they market a product that, as you can see on this forum, has so many problems and bugs that need to be fixed? I would advise all those who want to buy new products and recently marketed products from creative to wait a little bit more and not haste into it...i think the best speaker set that will be marketed under the name of t6060 would be somewhere in spring or summer of this year, probably the revision B or C series, cause this one really sucks. The speakers are alright, and they sound pretty clear and accurate, and it's probably a problem with the remote, as other people reported on the forum, but it's simply rude and disconsiderate to buyers and especially to Creative fans to release a product with so many bugs that need to be fixed. It's a shame really, and a huge dissapointment. I wonder how you all feel, all of you who posted on this forum about bugs related to your hardware...

IPod Touch 2nd gen 4.2 update volume problems

I just updated my 2nd gen ipod touch and the volume no longer works. The volume buttons dont work, when I play music or a video theres no volume bar underneath the play/pause control. The volume will only work when I have headphones plugged into the ipod but when I unplug the headphones the volume bar disappears. Any solutions???

I have 4.2 also. I was having sort of the same problem. My problem was the volume bar appeared but in some apps it was useless. Visit settings sounds you should see the volume slider. Under that it will say change with buttons. Make sure it says on. Hope this helps.
Caleb

Itunes 11.1.2 Volume problem

Music volume output from itunes to usb Soundsticks rig is less than half the level before update and probably distorted if I coul heat it
Sound from Safari sounds fine

As a matter of fact: I, as usually when prompted, installed the update. MacPro went very slow and eventually froze. Couldn't start other programs. Installation bar didn't proceed even after many minutes. No internet connection problems. Had to shut down and reboot computer. Same procedure since. Tried new install (no update) from APPLE.COM/ITUNES/DOWNLOAD but same thing. Computer slows down but now at least doesn't freeze. A message appaers after many minutes "Failure, contact software supllier". Starting ITunes reults in message: "File dammaged". However I can;t remove the 'old' ITunes.
I'd be glad with any help.

Iphone 4s bluetooth volume problems through Alpine HU

Having trawled through numerous reports of bluetooth problems with the 4S I have not found one which replicates my issue although I could have missed it.
Essentially I think my query boils down to " Does the 3GS output music, via bluetooth at a higher level than the 4S, assuming both using IOS5.0.1" .Because my new iphone 4S is much much quieter than my old 3gs and I want to establish whether this is a software problem or a faulty unit.
For the last couple of years I have been using a 3GS which paired perfectly with my Alpine CDA-9887/Bt400 stereo in the car, handled calls well and when playing music via the bluetooth input ( which it did exceptionally well) it was at the same sound level as the other inputs for a given vol setting, i.e. I could switch from radio, to disc to bluetooth withouth changing the volume.
Having just changed to an iphone 4S I have found that although the unit pairs ok and seems to handle calls well enough (although rather mushy sounding compared to 3GS) it is very quiet when using the ipod function via bluetooth.
Volume and sound quality are very subjective I realise but to give an indication of the problem, the Alpine head unit has a volume scale from 0-39. On all inputs (except with the 4S) a volume of 5 is fine for spoken voice, 12 good for music on the move 21 is very very loud pushing the cars speakers to the limit. These levels are approx the same when playing music through an iphone 3GS and an ipod touch via bluetooth.
By contrast the iphone 4S is inaudible at vol 5, needs 20 to be listenable to on the move and even at vol 39 sounds thin and about as load as a 3GS at vol18 so ful vol not possible from my iphone 4S
The main problem with this is that if you are listening to music from the iphone 4S then switch to the radio without remembering to drastically reduce volume it is likely to result in damage to the speakers and/or your eardrums. The problem is compounded as I use the TomTom app regularly and this exibits the same problem, the volume needs to be very high for instructions and then if I change input to listen to the news....ouch.
I have tried 2 iphone 3GS's and an ipod touch on this Alpine unit and they all work perfectly, being able to maintain the same output for a given HU vol level as the radio etc. I have tried increasing the bluetooth volume on the 4S handset, have tried clean restore to see if there is some obscure problem with my backup all to no avail.
Has anyone upgraded from a 3GS to a 4S and found the music level in a car via bluetooth much quieter, the same or louder and does this sound like a hardware problem.
thanks.

Funny Apple told me to eat **** and call my car place.
HELP !!!
It’s not like we are working with Samsun here. They should have thought it out fixed all the bugs then went ahead. I am...... ******! My 3 week old Volkswagen Tiguan no longer plays my MUSIC nor my Audible. Its so not ok. This is a breach of contract. I am told by apple you don’t have to update but my carrier said just the opposite our phones will not work without the updates...
Apple get you crap together, I had such respect you. You have let a lot of apple fans down.
A very ****** ex Apple Fan

Strange volume problem on Logic pro 8.0.2

Hey, I've been having this weird problem for a while and I'm not sure how to get rid of it. Basically, I start a new project lay down some audio tracks as well as software tracks and everything works fine. Then randomly, when I open a new audio track the volume is all screwed up.
I'll explain, when I play into it normally it comes out at normal volume, however when I record it plays back at a volume so low it's barely audible. Other things I've noticed is that the volume on the mixing desk no longer has any affect on the volume of my sound on that track, also soloing the track makes it play at the volume that it comes out when recorded (i.e almost silent). -(this problem then occurs on every audio track I open afterwards)
1.I've also got a list of things I know it's not. I know it's not my sound card because I've used two different ones and the problem re occurs.
2.I know it's not my computer because it happens on both my lap top and my desk top.
3.I know it's nothing to do with the speakers, or FX pedals I'm using.
Theres no difference between the way I'm opening the new track and the way I have opened previous ones (that worked fine) in the project. Oh yeah, and the most weird thing is I after the problem occurs it happens on every new track I open.
So at the moment audio tracks 1, 2 and 3 all work fine. But I've tried opening more and more tracks and all of them have this problem.
Someone please help, it's bloody infuriating when I'm half way through a song. Thank you very much.
Alex

There are separate volume settings for a track when it's record-enabled and when not (the same fader).
This is so that you can have different relative volumes during recording to help you play the part, without affecting the mix you've already set up for playback.
Could it be that this is tripping you up?

Volume problem with Music Player on N95

Hi all,
I am puzzled with a problem I'm having with my N95. The problem appeared after I performed an upgrade on the phone.
The thing is that the right side Volume keys do not work when using the Music player. I know the keys work since the zoom is working on the camera (the same keys). But what is really weird is that if I use the File Manager and open a music file, hence opening the Music player then the Volume keys work fine.
The problem is when I access the Music player either by the Media button on the handset or via the Menu > Music > Music Player.
This is driving me nuts I have tried to update the firmware with the same load without success, I just updated the firmware to the latest version V 30.0.018 hoping that it would be fixed but it didn't
Anyone have the same problem??
Thanks,

Hi pavelosk,
I solved the problems on mine. It wasn't easy and is not a straightforward solution. After several attempts everything is ok now. I had to restore the phone to original settings. But also you need to remove all media in the phone. Somehow when the files or links to files are corrupted (often by downloading music via PC suite) this in turns gets the phone in this weird status. It is best to download music files to the phone via a data transfer.
Anyways you need to make sure all music files are deleted and that from within the music player library you cannot see any music file. It must state 0 Music files.
Once you have got rid of this, then I had to load the firmware several times until it worked. I am not sure but it happened to me that there was a new firmware available, but it didn't fix it on it's own. I had to remove the files and re-flash it like 4 times before the issue dissappeared. I know it isn't a step by step guide. But no one else knows what the problem is exactly. I am happy I managed to fix mine (after more than 4 month of trying!!!)
Good luck.

T6060 volume problem

Similar Messages

Maybe you are looking for