T60p and T61 LAN adapter connection issues

Hi all,
Strange issue concerning LAN adapter on both T60p and T61. Either thinkadvantage laptop is at a different remote location connected to headquarters via a ptp link(fibre). This remote link has been updated recently. DHCP is assigned from main officeto all user locally and at the two remote sites.
For some very strange reaso, these both laptops are the only systems at the remote site that cannot get assigend ip settings via DHCP. Also if I manually assign them static ip settings, (the limited or no connectivity icon disappears) which i presumed but there is still no connectivity to these two laptops via ping cmds etc.
Even more strange is when these laptops are brought to back to headquarters and are plugged into the network here, they get assigned ip settings like they should and everything works like it should.
Also all the other systems at the remote sites get their ip settings dynamically like they should.
The LAN adapters are intel
I have reinstalled drivers, used winsock repair tools and also plugged the laptops directly into the fibre swtich on the dedicated vlan port that connects to the local swtich at the sites. Still same syptom
I am very confused at the moment and would appreciate any advice or solution. At the moment I believe its how the network card communicates with the protocol on link maybe there is an issue. I am not sure. Appreciate any input guys/gals

Hi,
Do you enable ESB email notification in ESB Control for your ESB system and mail still not received?
Some errors cannot be caught by ESB email notification (for example, you use polling DB-adapter and provide a incorrect login password and so on, you can use rejection handlers for this type of errors. I not implemented this yet in our system but think it should work).
Errors raised when you ESB-process already started - may be caught.
You will receive email with flow_id, initial payload and error message (if didn't use asynchronous calls: bug 7616012 - error message is empty when error raised after asynchronous service invocation in 10.1.3.3 (can be not visible..)).
Best Regards,
Mikhail.

Similar Messages

Macbook air Mini DisplayPort to VGA Adapter connectivity issues

Hi pple,
Would like to ask if anyone is facing connectivity issues with Mini DisplayPort to VGA?
I am currently using the 2nd Gen Macbook Air with Intel HD Graphics 3000 384 MB. Sometimes when I connect to a montior (Viewsonic VA1918wm) it works fine, sometimes it just does not work and the laptop just shows me a blue screen.
I tried with out with my friend's Mini DisplayPort to VGA adapter, it has the same problem. Does this means that my macbook air mini disoaly port got a problem?
Thanks
Bryan

I am experiencing the same kind of problem... only with projectors. Some projectors will display the screen and then others wont even register with the MacBook Air.
Using an Apple Min Displayport to VGA adapter. It's hit or miss if it works. Firmware has been updated on the adapter but this did not help.
Anyone help with this?
Thanks,
Nathan.

WRT160n and Xbox 360 Internet connection issues

I just got this router and it is working fine in getting connection but me and my roommates are having issues with the NAT type when playing xbox. As far as i know, two are hooked into the LAN via ethernet cable and the other is using wireless. When playing we all experience different levels of NAT type, Strict, Moderate, and Open. Is there a way to set up the router so that the NAT will stay open for all of us at the same time. The only way to get that now is to unplug the router just as we want to get on and play.
War Eagle.
Frattleship

Who is your ISP...?
How many X-Box do you have...?
Have you open the ports on the router...?
Also check this link.

My iPad2(Wifi-16Gb) unable to connect to home wifi network after upgraded to iOS6. The said network is a remembered network and never face this connection issue before iOS6.

Forget and reconnect the netwrok doean't solve the problem.
Even Network Reset recommended in others iPad user in the forum can't help as well.
Please advice. Thanks.

Some things to try first:
1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
4. Go into your router security settings and change from WEP to WPA with AES.
5. Renew IP Address: (especially if you are droping internet connection)
    •    Launch Settings app
    •    Tap on Wi-Fi
    •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
    •    In the window that opens, tap on the Renew Lease button
~~~~~~~~~~~~~~~~~~~~~~~~~
iOS 6 Wifi Problems/Fixes
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

JDBC Adapter Connection Issue

Hi Experts,
The scenario is file to JDBC, the messages are getting failed in XI MDT with the following error "JDBC Message processing failed ,reason when attempting to get processing resources: com.sap.aii.af.service.utill.concurrent.ResourcePoolException: Unable to create new pooled resource: DriverManagerException: Cannot establish connection to URL<JDBC Connection details maintained in CC>: SQLException: Io exception: The Network Adapter could not establish the connection".
We got this error after changing the IP addreass of the Oralce system. we did maintained in all the communication channels with new IP Address, previously the data is updating to the Oralce table with old IP addreass.
IP address is also maintained in XI Host file. We are able to ping the Oralce from XI with new IP.
Can any body suggest how to rectify the issue.
Thanks in Advance
Bhaskar

Hi,
have you checked cache status. It is possbile that the change hasn't been applied yet. That would explain, why the database can't be reached.
Stop/Start of communication channel might also help. Sometimes it si necessary to restart the whole JDBC Adapter.
If all this fails, you should get yourself a free copy of DBVisualizer, use the same database driver as is installed on PI, provide credentials and try to reach database. Might also be a driver issue.
Regards
Sven

Oracle 10G on XP : Network Adapter Connection Issue

Hi,
I am trying to install an enterprise software which uses Oracle 10g database.
I have installed the database, but installation of the enterprise software fails with the following error message.
THROWABLE EVENT {Description=[Failed to create connection],
Throwable=[java.sql.SQLException: Io exception: The Network Adapter could not establish the connection
oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:125)
oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:162)
oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:274)
oracle.jdbc.driver.T4CConnection.logon(T4CConnection.java:319)
oracle.jdbc.driver.PhysicalConnection.<init>(PhysicalConnection.java:344)
oracle.jdbc.driver.T4CConnection.<init>(T4CConnection.java:148)
oracle.jdbc.driver.T4CDriverExtension.getConnection(T4CDriverExtension.java:32)
oracle.jdbc.driver.OracleDriver.connect(OracleDriver.java:545)
The listener name is "LISTENER" and Listner service name is OracleServiceBMCPDS.
The listener is running.
LSNRCTL> status
Connecting to (ADDRESS=(PROTOCOL=TCP)(HOST=hostname)(PORT=1521))
STATUS of the LISTENER
Alias                     LISTENER
Version                   TNSLSNR for 32-bit Windows: Version 10.2.0.2.0 - Production
Start Date                10-JUL-2009 16:54:48
Uptime                    0 days 0 hr. 38 min. 11 sec
Trace Level               off
Security                  ON: Local OS Authentication
SNMP                      OFF
Listener Parameter File   C:\abc...\network\admin\listener.ora
Listener Log File         C:\abc...\network\log\listener.log
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=hostname)(PORT=1521)))
Services Summary...
Service "BMCPDS" has 1 instance(s).
Instance "BMCPDS", status UNKNOWN, has 1 handler(s) for this service...
Service "BMCPDS.corp.capgemini.com" has 1 instance(s).
Instance "bmcpds", status READY, has 1 handler(s) for this service...
Service "BMCPDS_XPT.corp.capgemini.com" has 1 instance(s).
Instance "bmcpds", status READY, has 1 handler(s) for this service...
The command completed successfully
I am not a DBA hence finding it hard to resolve the issue. Your help is highly appreciated.
Edited by: user3533384 on Jul 10, 2009 6:12 AM

Are you talking about the Enterprise Manager Console provided by the oracle or some other enterprise software? If it is enterprise software then you need to the do the proper setting for network connection to database. Probably you will have to configure tnsname.ora and sqlnet.ora. Can you connect through SQL*Plus utility? Go to Run-->SQLPLUSW type in the username password and tnsnames entry for the database. See if you can connect. If not post us the error message.
Regards.

DB Adapter connectivity issue

Hi,
I am trying to create a BPEL process which connect to a Custom oracle database using DB adapter. This process is supposed to read data from custom table and populate elsewhere. In BPEL designer I am able to create the connection, view the tables and create mapping. Then I deployed the process. Now when I try to test the process by inserting data to the table, it is throwing following error message in the log and no process is getting initiated in the console. Any thoughts on what could be the problem? Is there anything that I am missing after creating and deploying the process?
<2006-02-21 17:42:16,023> <WARN> <default.collaxa.cube.activation> <Database Adapter::Inbound> <oracle.tip.adapter.db.InboundWork runOnce> Exception during polling of the database ORABPEL-11624
DBActivationSpec Polling Exception.
Query name: [DatabaseAdapter], Descriptor name: [CDHTestPrj1.CustomerMaster]. Polling the database for events failed on this iteration.
If the cause is something like a database being down successful polling will resume once conditions change. Caused by Local Exception Stack:Exception [TOPLINK-4002] (OracleAS TopLink - 10g (9.0.4.5) (Build 040930)): oracle.toplink.exceptions.DatabaseException
Exception Description: java.sql.SQLException: ORA-00904: "COMPLETE": invalid identifier

Hi,
I am trying to create a BPEL process which connect to a Custom oracle database using DB adapter. This process is supposed to read data from custom table and populate elsewhere. In BPEL designer I am able to create the connection, view the tables and create mapping. Then I deployed the process. Now when I try to test the process by inserting data to the table, it is throwing following error message in the log and no process is getting initiated in the console. Any thoughts on what could be the problem? Is there anything that I am missing after creating and deploying the process?
<2006-02-21 17:42:16,023> <WARN> <default.collaxa.cube.activation> <Database Adapter::Inbound> <oracle.tip.adapter.db.InboundWork runOnce> Exception during polling of the database ORABPEL-11624
DBActivationSpec Polling Exception.
Query name: [DatabaseAdapter], Descriptor name: [CDHTestPrj1.CustomerMaster]. Polling the database for events failed on this iteration.
If the cause is something like a database being down successful polling will resume once conditions change. Caused by Local Exception Stack:Exception [TOPLINK-4002] (OracleAS TopLink - 10g (9.0.4.5) (Build 040930)): oracle.toplink.exceptions.DatabaseException
Exception Description: java.sql.SQLException: ORA-00904: "COMPLETE": invalid identifier

3750 switch and HP switch fiber connectivity issue

I have connected 2 Cisco 3750 switches "WS-C3750-48TS-S" with the LC to LC Duplex Single Mode fiber cable. Both the switches are communicating with each other.
As i have checked in the cisco document that GLC-SX-MM support only Multimode fiber cable. So i am surprised how does it support single mode fiber optic cable.
Can anyone tell me the reason for supporting single mode fiber optic cable?
But when i connect HP 4208 switch with the same Cisco 3750 the interface is showing up but the input packets are 0 and output packets are increasing on both ends.
I have checked the SFP's and fiber cable are compatible with HP.
Can anybody suggest me what can be the possible cause of this?
Regards,
Mukesh Kumar
Network Engineer
Spooster IT Services

I tried to troubleshoot this issue by using some show commands.
As i have checked that there are some specific commands to check SFP transreceiver as given below:
show hw-module subslot slot/subslottransceiver port idprom.
show interfaces {{[int_name] transceiver {[detail]} | {transceiver [module mod] | detail [module mod]}}
But these commands support only those transreceivers which support DOM. GLC-SX-MM doesn't support DOM.
Can anyone tell me that are there some troubleshoting commands to solve out the issue?
Regards,
Mukesh Kumar
Network Engineer
Spooster IT Services

You View and Sony Bravia HDMI connection issues

For what it is worth I though I would post a solution that has worked which solved compatability issues between some Sony Bravia TV's and YouView boxes.
I have used a YouView box with no problem via a SCART on an old TV
I invested in a Sony Bravia - installed today by John Lewis
The YouView was only recognised by the Bravia if it was switched on by the power switch - once on it bringing it out of standby via the remote and selecting the input on the Bravia would only lead to a Blank Screen on the Sony (it would also not swiitch automatically to the input the YouView was on).
Long discussion with Sony followed and Sony said "most" of their TV's would recognise YouView via HDMI - but some had "unexplained" compatability issues - when asked what I should do the Sony man said if this was important I should ask John Lewis to change the set.......
Helpful discussion with John Lewis support - I did not want to change the set and JL suggeted connecting the YouView to the Sony HDMI via an HDMI "switch" box - only connecting the YouView to the switch box. (It seems that the Sony will recognise the switch - but not the YouView directly....)
Bought a Switch from Maplin (HSW0501BN) - connected YouView to the switch and the switch to Sony Bravia TV via HDMI - and it works brilliantly.....
Turning the YouView on/off via the remote from standby changes the input source to the YouView on the Sony - and it has always been recognise by the Sony - no more blank screens.
A pain in the neck for a new TV - clearly a problem with some Sony Bravia TV's and YouView - it would be nice if both YouView (Humax) and Sony could talk together to fix it....
But for now it seems the intermediate switch gets over the issue.
I thought this was worth sharing in case anyone else has the same issue - I cannot say it will work for every-one - but it worked for me - thanks to John Lewis support.............
Solved!
Go to Solution.

Hi
It's a SONY KD-55X-8505BBU -- It's the "lo-spec" 4K model and works brilliantly.
The SONY man said "most" of their TV's work with YouView HDMI - but they have had some instances of incompatability and could do nothing about it.............
The YouView worked with the SONY - but it needed to be switched on and off for the HDMI to recognise it - I temporarily ran it through the SCART - which worked OK (to which the SONY man asked why I was concerned if it worked with a SCART!!!)
The advice from John Lewis was great - just connected the YouView HDMI to a HDMI switch box - and connected the swirch box to the SONY - it all works fine now.
It just seems that SONY are not aware (or are not prepared to tell you) the solution - and only higher level John Lewis staff are aware of this (the John Lewis installer was stumped).
Not sure anyone else will have the problem (although I have seen several reports of this on the web) - and I am happy with the solution - just wish the (paid for) installers knew - and that SONY knew/or were prepared to tell you (guess they did not want to be asked for the price of the HDMI to cure the "incompatability" problem).
I was so amazed at the poor response from SONY and I asked them to confirm that the call was recorded and took the recording number - needless to say John Lewis was not impressed with Sony telling me that the only solution was to send the set back to John Lewis -- Sony have suffered a big drop in my estimation - although the TV is brilliant......

FCE and FCE HD Firewire Connection Issues

Hello, I just recently cleaned out my hard drive and reinstalled Tiger 10.4.11. I reinstalled all my previous applications with out any problems, but I had an issue with both versions of FCE. For some reason it won't recognize my firewire port. I don't know if there was something else I had to do to get it to recognize. The cable is fine and the camera, because I got it to work with my Power Mac G4 last night, but it doesn't work for my laptop. Any ideas? Thanks, Matt

All HDV is MPEG-2 based. It's an HDV tape camera. The problem is QT7.4 and the older version of FCE. Some people have got this to work. I don't know how, but many others have had problems using that and older versions of FCE and newer versions of QuickTime, 7.3 and probably 7.4 as well.

T420 internet connection issues

I'm probably over complicating this situation, since I know little about computers, but here it is.
My T420's hard drive became a victim of the "Click of death," and I had to buy a replacement. I installed Windows 7 and I now experience connection issues. I cannot connect Wirelessly or Ethernet cable. With troubleshooting I receive a "Windows did not detect a properly installed network adapter" message.
I'm assuming I have to install drivers, and I'm clueless there.

GrumpyFish wrote:
I'm probably over complicating this situation, since I know little about computers, but here it is.
My T420's hard drive became a victim of the "Click of death," and I had to buy a replacement. I installed Windows 7 with an and I now experience connection issues. I cannot connect Wirelessly or Ethernet cable. With troubleshooting I receive a "Windows did not detect a properly installed network adapter" message.
I'm assuming I have to install drivers, and I'm clueless there.
welcome to the community.
sorry you're having issues.
if you post your machine type (from sticker on bottom; don't post s/n), we can probably get you pointed in the right direction.
a question to clarify... how did you install windows and which version?
edited to add: follow-up... i believe the link below is for the wired nic in your machine. pick the 32 or 64 bit version as appropriate. once you can get on-line, you may be able to run thinkvantage system update (if it's installed) to get any other needed drivers.
http://support.lenovo.com/en_US/downloads/detail.page?DocID=DS019204
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество
Community Resources: Participation Rules • Images in posts • Search (Advanced) • Private Messaging
PM requests for individual support are not answered. If a post solves your issue, please mark it so.
X1C3 Helix X220 X301 X200T T61p T60p Y3P • T520 T420 T510 T400 R400 T61 Y2P Y13
I am not a Lenovo employee.

Connectivity issues after 8.1.1 update please help! :(

Hi all. Here's the situation.
I got my Iphone 6 on release day.
Not had one single problem with it.
On Monday however I do a general software update to IOS 8.1.1
Now ever since then I cannot keep a steady connection to both WIFI AND my roaming internet.
BOTH show as connected however load EXTREMELY slowly or not at all. No matter where I am.
I have done a soft reset.
Switching on and off.
And resetting Network Settings.
Done all these 3 or 4 times and they are not helping.
It is too coincidental to not be because of the software update.
Can someone please help me?

Still no help for you? I updated my iPhone 6 to 8.1.1 this past weekend and now have huge connectivity issues too. My home WiFi signal is 5 bars but runs very slow for example Facebook, the phone cannot update messages or photos. Try to connect for online banking, forget it. I have turned off WIFI and try using my Verizon signal which is 3 out if 5 bars, same problem. Don't understand why Apple cannot fix this apparent bug. Will call Apple Care in a few minutes and let you know what they say.

BLUTOOTH CONNECTIVITY ISSUES ON 6 PLUS

I have an iphone 6 plus and am having blutooth connectivity issues to my Mercedes. About 50% of the time there is no connectivity. To 'fix' this I often have to turn off my phone, and turn it on again. Does anyone have another workaround/fix?
Thanks!

*** IF YOU HAVEN'T REPORTED YOUR BLUETOOTH ISSUE TO APPLE SUPPORT http://www.apple.com/support/ OR APPLE FEEDBACK http://www.apple.com/feedback/, PLEASE DO SO! ***
The Apple specialist that I spoke with said the more people who report their issues, the higher probability the issue will get fixed (sooner). Don't just assume other people already reported it to Apple (or that the decision-makers at Apple read these forums). "The squeaky wheel gets the grease!"
3/29/2015
DEVICES:
4 x iPhone 6 Plus
1 x iPhone 6
4 x iPad Air 2
1 x iPad Mini 2
3 x iPad 4
VERSION:
iOS 8.1.3 >> iOS 8.2 (all devices)
VEHICLES:
2 x 2009 Mercedes-Benz E350
1 x 2012 Mercedes-Benz GL450
(will test 2008 Lexus LS600hL & 2015 LX570 later this week)
After weeks of reading about iOS 8.2 issues and how iOS 8.2 is supposed to contain a certain vague BT fix, I thought it was finally safe to risk another iOS update to fix my long-standing car Bluetooth issue with iOS 8.1.3. I WAS WRONG!
Upon updating to iOS 8.2, we noticed that our existing Bluetooth issue (started since iOS 8.0.x) was still present. Ever since iOS 8.0.x, we have had the very annoying Bluetooth issue of call audio cutting in & out when connected. After further research and testing, we determined that the cause may be that the iPhone (iOS 8.0.x and above) actually randomly disconnects and reconnect with the car's BT every 10-120 seconds, thus interrupting the audio through Bluetooth… however this behavior is difficult to detect without active Bluetooth call/audio going through the speakers.
Unfortunately, we also noticed that IOS 8.2 ADDED NEW BLUETOOTH PROBLEMS to the mix! With iOS 8.1.3, we could stream audio (I.e. Pandora, iTunes Radio, Rhapsody) at higher quality perfectly. Right after the iOS 8.2 update, everyone suddenly noticed that the audio from Pandora or other streaming music apps would briefly pause or skip & stutter every few seconds. We lowered the audio quality to "Good" instead of "Better" or "Best" but that did not make a difference ("Good" is around 64 kbps). At the same time, we did a speed test and found the 4g connection at that time was 6.8Mbps down… more than enough to stream a 64kbps signal without constant stuttering/buffering. Tests with devices still on iOS 8.1.3 show this is an isolated iOS 8.2 problem (the device streamed Bluetooth audio perfectly… was updated to iOS 8.2… Bluetooth audio was tested again and now exhibited the stuttering problem).
I hope Apple is going to fix this issue in iOS 8.3 or sooner... more and more people seem to have this (or variations) issue, and many others also are affected, probably haven't noticed (yet).
UPDATE 3/30/2015: After today’s preliminary testing with the vehicles above, this is what I found:
OUTGOING CALLS: In iOS 8.1.3, after much research and testing I have determined that the iPhone’s Bluetooth drops connection with the vehicle periodically, then immediately reconnects again, resulting in several seconds of audio silence on both ends of the call (same behavior as if you’re going through a cellular “dead zone”… but you’re not). With iOS 8.2, Bluetooth still exhibits the same issue, but now with an increased frequency. (NOTE: Unpairing & repairing Bluetooth connections as well as Resetting All Network Settings did NOT solve this problem… as other Internet posters, forums, and articles can tell you.)
INCOMING CALLS: In iOS 8.1.3, incoming calls suffered the same issues as outgoing calls (see above), but didn’t exhibit any other Bluetooth problems with my vehicles. With iOS 8.2, Bluetooth issues for incoming calls are now significantly WORSE! Approximately 75% of all incoming calls will ring twice, then drop (i.e. “Call Failed”). 90% of the time, the incoming call ring won’t transfer to Bluetooth audio (instead only ringing on your handset). (NOTE: Unpairing & repairing Bluetooth connections as well as Resetting All Network Settings did NOT solve this problem… as other Internet posters, forums, and articles can tell you.)
STREAMING AUDIO/MUSIC: In iOS 8.1.3, Bluetooth audio/music streamed fine from my iPhone to my vehicle, even with 3+ Bluetooth devices connected simultaneously. My vehicle’s Bluetooth does not support Bluetooth audio, so I have installed a Kinvo BTC450 Hands-Free Car Kit (aptX) to play streaming audio through my vehicle’s speakers. The only issue I had was that the iPhone does NOT allow manual selection of assigning specific Bluetooth devices specific functions unlike Android 4.0.4 and above (for example, with Android I could assign incoming/outgoing call functions & audio to my car Bluetooth, and streaming media audio to my Kinvo BTC450… with iPhone iOS 8.2 and prior you cannot do that so the phone Bluetooth fights to assign incoming/outgoing call functions & audio to one of the two devices… usually the one that boots up the fastest). With iOS 8.2, not only is this problem still here, but now if you have 3 or more Bluetooth devices connected (not only paired) simultaneously, then it is as if the iPhone has to buffer streaming audio every few seconds, which will pause or stutter the audio feed to the Kinvo BTC450 (or whatever Bluetooth device you use). This happens with ALL streaming audio feeds, whether it’s Pandora, iTunes Radio, Rhapsody (although it occurs less frequently with some apps than others). After unpairing and re-pairing my iPhone to the device, suddenly ALL AUDIO DID NOT WORK! After doing this several times, I resumed driving in silence… then after about 15 minutes all of a sudden the streaming audio (Pandora which I didn’t pause) started streaming through my car speakers again (although the stuttering/pausing audio issue was still present). Resetting All Network Settings did not have an effect on this problem either. (NOTE: Unpairing & repairing Bluetooth connections as well as Resetting All Network Settings did NOT solve this problem. This problem is only solved by connecting only 1-2 devices simultaneously and preventing any more devices from connecting as other Internet posters, forums, and articles can tell you.)
MY RECOMMENDATION: If you use multiple Bluetooth devices simultaneously with your iPhone/iPad (especially 3 or more)… then AVOID iOS 8.2 AT ALL COSTS! If you already upgraded (as I have), then from what I understand it’s too late to downgrade to iOS 8.1.3 since Apple doesn’t “sign” that firmware anymore… so your choices are either to live with iOS 8.2 or jailbreak... or switch to another phone manufacturer. If you don’t use Bluetooth or connect to multiple devices simultaneously (i.e. smartwatch, car Bluetooth, 3rd party car kit, radar detector, portable speaker, headphones, portable keyboard, etc) then iOS 8.2 may work OK for you. Hopefully iOS 8.3 will solve these Bluetooth issues… but based on Apple’s track record I wouldn’t hold my breath.
UPDATE 4/2/15: Tonight I tried to stream Bluetooth audio from Pandora and Rhapsody through my UE Boom. I had my Pebble Steel, Panasonic 6.0 DECT Link-to-Cell Cordless Phone System, and UE Boom connected via Bluetooth at the time. Bluetooth audio skipped 1-2 times per second. This issue is getting very frustrating... to the point where I want to throw my iPhone in the trash.

Unexpected shutdowns and loss of internet connectivity on brand new 420t

Hi,
I was experiencing unexpected shutdowns (would see safe mode choices when turned PC back on) and also intermittent internet connectivity issues.
To Fix:
In device manager, I turned off the option in the Realtek Network Controller Power management tab to allow the computer to turn off this device to save power.
It's been working like a charm so far (2 days). I'm not so sure HP should be building PCs with this option set. There are no updates that I haven't installed either. PC still sleeps (can see nic lights go off) and wakes up just fine.
Other that that we really like this PC...Beats Audio wasn't impressive with only the internal speakers, then I tried a good set of external tweeters and a subwoofer and then it was realized.
Hope this helps someone.

Troy,
Thanks for the suggestion. It sounds like you've heard that others have had this problem. Is that right?
And are you suggesting that the kernel panics and the loss of Internet connection are related? They often happen independently of one another.
Claire

TSeries LAN connection issues across fibre link

I have some LAN connection issues when getting dhcp or even assigning static ip to T61 laptop. Doesn't get dhcp ip settings dynamic and if given staitc, can't ping any system on network nor can systems ping it. DHCP is at main site and this laptop is at remote site. Link between sites is fibre. All other systems at remote site where is laptop get their DHCP settings as normal. If I bring laptop from remote site to main site and plug in cable it gets DHCP normal but not at remote site, it doesnt get it, so i know the LAN adapter is good. What is wrong?, what across WAN link it preventing it? seeing that all other systems at remote site get their settings well. Thanks in advance.
Message Edited by ansa on 06-01-2009 03:36 PM
Message Edited by ansa on 06-01-2009 04:14 PM

I was able to resolve the problem. "The following CLI commands have been added to allow devices that do not understand the controller's proxy Address Resolution Protocol (ARP) response without a minimum packet size of 60 bytes to communicate with the controller: show advanced dot11-padding, config advanced dot11-padding enable"

T60p and T61 LAN adapter connection issues

Similar Messages

Maybe you are looking for