T60P Fingerprint No Longer Showing up in Vista

I was getting an error after I logged in to Vista involving the fingerprint software, so I uninstalled it and reinstalled it. I no longer get the error, but I also do not get the option to use fingerprints when I log in or when coming back from having the screen locked. The icon is not on the screen. I have reenrolled my fingerprints and that did not help.

OK, I fixed it. I simply inserted the Mac OSX install DVD while in the windows side and clicked "repair" bootcamp.
Mac Hard Drive is back and browseable.

Similar Messages

Mac HD no longer shows up in Vista

I installed the bootcamp update that is recommended before upgrading to Windows 7. However, my Windows 7 upgrade was unsuccessful due to my existing version of Windows (evidently Vista Ultimate cannot be upgraded to Windows 7 Home edition).
Anyway, I resorted to a Vista Service Pack 1 instead. Everything works fine EXCEPT I can no longer browse to the Mac HD when I'm on the Windows side. I suspect it has something to due with the bootcamp update that was intended to ready the computer for Windows 7.
The bootcamp update clearly says "This utility safely unmounts the read-only Macintosh volume on Microsoft Vista"
My question is... how do I get it back?

OK, I fixed it. I simply inserted the Mac OSX install DVD while in the windows side and clicked "repair" bootcamp.
Mac Hard Drive is back and browseable.

CCTV DVR No Longer Showing Images On IE9

Hi there,
I hope someone may have an idea as to what may be causing the below issue.
Our business has a CCTV DVR that we have been using via Internet Explorer successfully for over 12 months now.
However, since updating to IE9 on a few of our Windows 7 machines the images will no longer show, we can log into the DVR and all of the interface shows correctly it is just the camera images that will not show.
We have had success on only one PC using IE9, the difference being is that this PC uses Vista business and has an ATI graphic card (all the others that will not work have Nvidia cards including one Vista Ultimate machine)
As a test I formatted one of the Windows 7 machines and reinstalled Windows 7, then drivers etc before installing IE8.
I then logged into our DVR successfully and all the camera images streamed ok, after this I updated to IE9. When logging into the DVR now with IE9, again no images stream. The Activex is installed correctly and running or I would assume so as all the interface
loads and comms commands work (retreiving settings, copying footage from the HDD etc).
When we first got this DVR we did have this same problem and after speaking to technical support they got me to run dxdiag which shown that Direct Draw was not available, they advised me to update the display drivers on the PC which cured the issue (direct
draw then shown enabled and images streamed).
Although I would have thought display drivers would not be the issue as IE8 works ok updating them was one of the first things I did after the issue first appeared on IE9.
I have been in contact with manufacturer and they have said they will look into it but I just thought I would ask here incase any of you knowledgable folk may know what could cause this.
I realise this may not even be something to ask here also, it may be better answered on the Nvidia forums I just dont know.
The manufacturer has an online demo of the same DVR on their website so if any of you would like to see exactly what I am talking about you can visit this link: http://www.symphony-dvr.com/sections/demo/instruct.php
Just to recap and give you a bit more info on each PC here are the operating systems and graphic cards installed, all drivers have been updated:
Windows 7 Ultimate 32-bit - Nvidia Gefore 6200
Windows Vista Ultimate 32-bit Nvidia Gefore 6200
Windows 7 Ultimate 64-bit - Nvidia Geforce 8800GTS 512MB
Windows 7 Ultimate 64-bit - Nvidia Gefore 8800GTS 320MB
Windows Vista Business - ATI Radeon 4600 (Only Working Computer)
Thanks for any help and if there is any more info needed just ask

Hi,
Thanks for the post!
In certain cases with some graphics card, Internet Explorer 9 may have performance or fidelity problems when drawing webpage content. You can try the following method to check if it works.
Open the Internet Explorer 9, press Alt, click Tools - Internet Options.
Click Advanced Tab, check the box "Use software rendering instead of GPU rendering".
Meanhwile, please also ask this question in
NVIDIA Forum since you mentioned update the driver fix part of the issue.
Regards,
Miya
Note: Since the website is not hosted by Microsoft, the link may change without notice. Microsoft does not guarantee the accuracy of this information.
This posting is provided "AS IS" with no warranties, and confers no rights. | Please remember to click "Mark as Answer" on the post that helps you, and to click "Unmark as Answer" if a marked post does not actually answer
your question. This can be beneficial to other community members reading the thread.

Beats audio no longer shows a display when i turn volume up and down pavilion dv7 win7

my pavilion dv7 used to show a display when i changed volume. it no longer shows up. volume works fine. i can open beats audio just fine.

Hi,
Try using Recovery Manager to reinstall HP Quick Launch Buttons - the procedure for using recovery manager to reinstall Software and Drivers is detailed in the relevant document on the link below.
Recovery Manager - Windows 7
Recovery Manager - Windows Vista
After the reinstallation has completed, restart the notebook.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

IPhone no longer showing up in (My) Computer and photos no longer synching

I recently switched from a desktop to a laptop, both of which run Vista Ultimate. The desktop synched fine but the laptop will not sync pictures. I noticed that the desktop shows the iPhone in Computer as a camera but the laptop does not.
I have:
1. Uninstalled iTunes and reinstalled iTunes in numerous ways
2. Manually deleted all references to Apple, Apple Computer, Quicktime and iTunes from the registry and all folders off of the hard drive
3. I have done a soft and hard reset of the iPhone
4. I have restored the iPhone to factory from within iTunes
I know it has something to do with it not showing up in Computer. And if I delete the iTunes driver from Device Manager and tell it to delete the driver from the hard drive, the PC then detects the iPhone as a camera and it shows up in Computer but it no longer shows up in iTunes and I cannot manually copy any files to it
Any suggestions would be apprectiated!!

I fixed it!
You have to go into your Pictures folder and delete the iPhone Photo Cache folder....then it will recreate it and successfully sync!!
It still does not show up in My Computer but I think if I reconnect my iPOD and enable Disk-Access, that that may resolve that small problem as well

Lenovo T60P BlueTooth No Longer Working

Bluetooth no longer shows up in device manager and when I hit Fn-F5 does not show up in list (used to show up).
I know this computer has bluetooth HW but device manager cannot find it.
I tried installing Enhanced BlueTooth latest SW but it indicates that it cannot find the HW.
Also, Vista does not show any Bluetooth in Control Panel.
I had to wipe the machine and install clean Vista a while back since then I cannot find BlueTooth.
How do I enable the HW? How do I detect if the HW is defective? Where do I get the BlueTooth drivers?

Could someone please respond to this post. I am having a similar problem with my bluetooth after installing the bluetooth software here:
http://www-307.ibm.com/pc/support/site.wss/document.do?lndocid=MIGR-62928#bluetooth
I reformatted, and haven't been able to use bluetooth since.
Thanks guys!

My iPod touch(4th gen.) no longer shows up in the iTunes sidebar, any ideas?

Does anyone know why an iPod no longer shows in the iTunes sidebar?

Assuming a PC
Try
iOS: Device not recognized in iTunes for Windows
I would start with
Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
or
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
Before you reinstall the Apple software, also remove iCloud vi Control Panel Remove programs. The reinstall the Apple programs
New cable and different USB port?
Runs this and see if the results help with determine the cause
iTunes for Windows: Device Sync Tests
Try on another computer to help determine if computer or iPod problem

XP no longer shows up as a startup disk

After upgrading to leopard today, my XP partition no longer shows up as a startup disk.
I had/have my windows partition on it's own drive that was NOT created with bootcamp. I pulled my osx disk from the my mac pro and installed windows on the disk i had in bay 2 using 100% of the disk (ntfs). after installing the bootcamp windows drivers, i reinserted the osx disk and all has been well for the last 4 months,... until the upgrade today that is.
Now, when i go to the 'Startup Disk' preference Windows is no longer an option. the disk still shows up in Finder and I can navigate around the file system.
Anyone have any ideas on how I can get it to show up again? I'd really rather not have to reinstall if i can avoid it.
thx.

I have exactly the same problem (well, maybe).
I have installed MacFUSE and ntfs-3g. I don't know if this is of any relevance, because I don't know if it was working directly before I installed them.
I have my OS X and NTFS volumes on the same physical disk. I also had to install Windows twice because I buggered it up the first time (formatted the partition as FAT32 and ran into a bunch of disk errors).
I also notice that in WinClone I have 2 Untitled Volumes at /dev/disk0s3 and /dev/disk1s1. /dev/disk0s3 seems to be the legit Windows NTFS partition, but I have no idea what /dev/disk1s1 is about. I don't know if it's been there all along or not but perhaps it is confusing matters and stopping the legit Windows volume/installation from being detected...? Should that second volume exist at all? It doesn't exist according to the Disk util.
edit: I used fdisk just to have a look at the two untitled partitions.
Jacbook:dev jacteh$ sudo fdisk /dev/disk0s3
Disk: /dev/disk0s3 geometry: 10651/255/63 [171117408 sectors]
Signature: 0xAA55
Starting Ending
#: id cyl hd sec - cyl hd sec [ start - size]
1: 72 368 111 45 - 371 101 51 [ 218129509 - 1701990410] <Unknown ID>
2: 74 67 115 32 - 299 114 44 [ 729050177 - 543974724] <Unknown ID>
3: 65 114 111 32 - 353 115 52 [ 168653938 - 0] Netware 3.xx
4: 00 0 0 0 - 0 0 0 [ 0 - 0] unused
Jacbook:dev jacteh$ sudo fdisk /dev/disk1s1
Disk: /dev/disk1s1 geometry: 0/4/63 [63 sectors]
Signature: 0x0
Starting Ending
#: id cyl hd sec - cyl hd sec [ start - size]
1: 00 0 0 0 - 0 0 0 [ 0 - 0] unused
2: 00 0 0 0 - 0 0 0 [ 0 - 0] unused
3: 00 0 0 0 - 0 0 0 [ 0 - 0] unused
4: 00 0 0 0 - 0 0 0 [ 0 - 0] unused
I can hold the option key upon startup and manually enter Windows like that, but I'd prefer to be able to restart and boot Windows without having to hold a key.
Apart from not seeing the Windows boot volume in the system prefs pane, Boot Camp (and the rest of Leopard) has been excellent. I am impressed at the level of apple hardware support for windows. It seems to be much better than most native PC hardware.
I am dying for an answer. It's a fairly minor problem in the grand scheme of things, but **** it's frustrating.
Message was edited by: jacteh

Windows Partition No Longer Shows Up After Accidental Premature Closing of Camptune

Mac OS X 10.7.5
I was running Paragon Camptune to expand my Windows 7 partition. The progress bar reached the end and stayed there for about 30 minutes. The Camptune window was then accidentally closed and Camptune quit itself. I restarted the computer but the Windows partition no longer shows up when I try to boot it, only Mac OSX and Recovery Disk. The Bootcamp drive is no longer accessable from System Preferences, and the Bootcamp partition folder is no longer accessable in the Devices area of Finder. Camptune no loner recognizes that there was a partition. Thus, I am no longer able to access the partition's contents or delete it and make a new one.
It would be preferable if I could fix the partition and have it accessable again, however I have no problem with deleting it and making a new partition. Any advice? Thanks for your time.
Here is the information from the Partition Inspector:
*** Report for internal hard disk ***
Current GPT partition table:
#      Start LBA      End LBA Type
1             40       409639 EFI System (FAT)
2         409640   1151635239 Mac OS X HFS+
3     1151635456   1152904991 Mac OS X Boot
Current MBR partition table:
# A    Start LBA      End LBA Type
1              1       409639 ee EFI Protective
2         409640   1151635239 af Mac OS X HFS+
3     1151635456   1152904991 ab Mac OS X Boot
MBR contents:
Boot Code: Unknown, but bootable
Partition at LBA 40:
Boot Code: None (Non-system disk message)
File System: FAT32
Listed in GPT as partition 1, type EFI System (FAT)
Partition at LBA 409640:
Boot Code: None
File System: HFS Extended (HFS+)
Listed in GPT as partition 2, type Mac OS X HFS+
Listed in MBR as partition 2, type af Mac OS X HFS+
Partition at LBA 1151635456:
Boot Code: None
File System: HFS Extended (HFS+)
Listed in GPT as partition 3, type Mac OS X Boot
Listed in MBR as partition 3, type ab Mac OS X Boot

Hi Eric,
Bootcamp does show up in the disk utility but it is grey instead of black like the Macintosh HD.
The following information is available:
Mount Point: Not mounted
Format: Windows NT File System (NTFS)
Owners Enabled: -
Number of Folders: -
Capacity: 274.55 GB
Available: -
Used: -
Number of Files: -
What might be the best way to continue to repair it. I do not have the option to click on "verify disk permissions" or "Repair Disk Permissions".
Should I clone the hard drive in the target disk mode??
I'm not the best at this stuff so any more advice would be greatly appreciated!
Thanks!

IPod Touch no longer showing up under My Computer

My iPod Touch is no longer showing in the device list under My Computer and as such can't access it to get my photos off it.
It works in iTunes just fine, syncs fine, etc.
If I go to Devices and Printers, it used to be listed under the Devices category as iPod, but now shows under the Unspecified category as Apple Mobile Device USB Driver, so basically a generic device.
I have no devices with exclamation points or any other trouble signs under Device Manager.
Help?

Well, I am not entirely sure what exactly happened but after trying numerous times to reinstall the drivers and getting all sorts of error messages, I finally got Windows 7 to cooperate. The iPod Touch now shows up and is being detected as a digital camera under Devices, and under Computer it is showing up under Portable Devices. If I double-click on it I can view my pictures, transfer them, delete them, etc.

Status page in X3000 no longer showing any data.

Using the latest 1.0.05 firmware on X3000
Status page perpetually shows "Connecting" even though I'm connected.
It no longer shows data such as the Internet IP address, Gateway etc.
Only DNS IP addresses are shown.

Hi,
Try to turn off your X3000 for around 60secs then check again. If it's doing the same issue after doing a powercycle, you may have to perform a hard reset then reconfigure your router.
If everyone needs to believe in something, I believe I'll have another beer..

Ipad app store no longer shows updates

ipad app store no longer shows updates. was working fine until a couple days ago - whwt can I do?

If you are getting the blank app update screen, many people are having this problem over the last couple of days.
According to Fly150 in another discussion, this will work.
If you want to update the Apps while waiting for Apple to fix Updates:
1. Go to App Store
2. Select Purchased
3. Select All
4. Scroll down to find the Apps showing update
5. Select update on the Apps
This should update the Apps and get rid of the update count in App Store. Apple needs to fix this. It is a workaround only until then.

My MacBook Pro no longer shows up on my devices how do I add it back

Hi,
My MacBookPro no longer shows up on my devices that is associated with my AppleId. Any suggestions? I did go to ITunes and follow the instructions on how to add and delete but it is not giving me the option to add. Just had new hard drive installed and restored from time capsule without any other issues.
Operating system is 10.9.4., Processor 2.7 Ghz Intel Core 17, Memory 16 GB, 1333 MHz DDR3, Storage 526.65 Free out of 999.35 GB. and I did not update to OS X Yosemite. (Because I've heard negative things about IPhoto and I'm working on several photobooks right now.
Not sure if any of the information about my laptop is needed or useful, but thought it may be so am trying to be helpful.
Thanks - ANY feedback is much appreciated.
Frustrated mommy

Hi there,
When you say associated devices - are you referring to authorized devices within iTunes (i.e. devices that are able to access your iTunes account)? Or do you mean your registered devices when you log into your Apple ID on Apple's website?

My WD external hard drive will no longer show up on my Macbook pro.

My WD external hard drive will not longer show up on my macbook pro. The light turns on and you can hear it running but it won't show up either in finder or in the disk utility. This happened a while ago but I really want to get all my photos off the hard drive. Is there anything I can do to get my computer to read it again or get my data off of it?
I don't have access to another Mac to test it.
Thank you

dead sata bridge card. very common problem.
see all about it here:
Your dead external hard drive is likely fine! Great hope for your 'faulty' external HD
verify HD on another Mac however, if same, dead SATA card most likely

My settings icon is no longer showing. How do get back on my screen?

My settings icon is no longer showing on my iPad screen. I can found it when I search for it. But I how do I get the icon on my screen? Thanks in advance foray help you provide.

Have you checked all your homescreens and app folders for it, also how many screens of apps have you got on the iPad (there is a maximum of 11) ?
You could try a reset and see if you can find it after the iPad has restarted : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.
Of you could try resetting your homescreens via Settings > General > Reset > Reset Home Screen Layout and see if you can then find it.

T60P Fingerprint No Longer Showing up in Vista

Similar Messages

Maybe you are looking for