T60p, T60 wireless card shuts down by itself

Hello, Any help will be greatly appreciated. I have a T60p and T60 that have the exact same issue. When connected wireless after about 20 - 30 minutes the wireless card shuts off by itself. I loaded the updated drivers. I am not using Access Connections, Windows XP is managing the wireless profiles. I made sure that the computer is not shutting down the wireless card to save power. I am not using power manager but i did install the power manager driver. The card will shut down and the wireless light will go out but windows will still say that i am connected through wireless. I hit FN F5 and status of card is off but i dont have the ability to change it to on. It wont allow me to do anything. Also, when i close the lid it will not go in to stand by mode. I have to do a full restart to get the wireless back up and running. Any help please, this is really annoying. Both laptops are using the Intel Pro/Wireless 3945ABG card.
Thanks!!
Solved!
Go to Solution.

In your setting also change the roaming aggressiveness to low and output power to max.
Regards,
Jin Li
May this year, be the year of 'DO'!
I am a volunteer, and not a paid staff of Lenovo or Microsoft

Similar Messages

  • My macbook shut down from itself

    hi
    after i upgrade to mountain lion my macbook pro shut down from itself when i'm searching or doing somethin (weird proplem)!
    idk what's the proplem is it because i opened more than 2 apps (which i think it's a silly proplem if it's in the mountain lion)
    or because i connected my iphone 5 wirelessly with my my macbook!
    apple needs to fix this proplem, it happens everyday to me!
    what do you suggest?

    Hi,
    Try a hard reset of your iPod:  Press/hold the *home* and *sleep/wake* buttons until the Apple logo appears. 
    Hope this helps! 

  • Windows installation interrupted as Equium A300D shuts down by itself

    Dear all,
    I have had my Toshiba Equium A300D for 2 years now. During this time, it works normally, occasionally shuts down by itself maye because it was too hot.
    Recently, it tried to install updates from Windows but never successful. I left the computer to update for the whole night and it was still 2 out of 12 updates ... all the time so I always had to shut the computer down by pressing the power key.
    I was unable to change the setting to update Windows automatically because everytime I tried to do that it froze. Most other commands became nonresponsive even viewing pictures.
    It was until my computer was unable to connect to a certain wireless network while other devices can that I decided to reinstall Windows completely. It was installing normally but it got too hot and the computer shuts itself again!!!
    I tried to install again and it shut itself down again, but I got into the final stage of set up so when I turned it on again, it was still "finihing the installation may take several mins. lease do not interrupt or shut down the computer". I left it on for several hours but it didnt move to any different stage. Before the computer shuts itself down I think I got to the stage after this.
    I tried to press F8 to begin a new installation but it only got into this screen.
    What can I do?
    Please help me! Thank you a lot in advance!
    I am in Germany at the moment but I live and bought this computer from the UK.
    ttd500

    I accidentally threw away my Toshiba box without checking what was inside when I moved out last year and I wasnt sure if there was any disk so I dont have the Toshiba Recovery disk.
    I was installing using Toshiba Recovery inside the laptop, not with an external Windows disk.
    Can I download it somewhere on the Toshiba website?
    Message was edited by: ttd500

  • After 2 weeks my Iphone 4s shuts down by itself and I cannot  turn it on. What can I do. Itunes is telling me to restore the phone but the phone is saying the software isn't available

    My Iphone 4s  shut down by itself after a phone call and I cannot turn it on. I took it to istore and they said it was unrespinsive and there is nothing they can do? Anyone has a clue what can be done? When I connect the phone to itunes it indicates that the phone should be restored, however when i try to restore it, it says the "software for this iphone is not currently available" Is there anything I can do other than put this brand new iphone in the grabage?

    On computer, at the top of this page is a Tab for iTunes, click it, make sure iTunes is up to date. Also make sure computer Fire Wall and Anti Virus do not interfere with iTunes, turn them OFF to be certain.

  • Install 1102w--prints wireless, I shut down computer, drivers disappear from computer. Why?

    I install HP 1102W drivers successfully on my Windows 7 64bit. Prints wireless. Shut down computer and lose printers drivers, Check System Restore, and nt indications drivers were loaded. What happened to the print drivers on my computer?

    Download and install this: http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?cc=us&lc=en&softwareitem=mp-89191-1
    Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
    I am employed by HP

  • SAPCCM4X agents are shutting down by itself

    Hello Gurus
    A few SAPCCM4X agents are shutting down by itself and this is happening
    for systems which have a version 4.6c and 4.5B in our landscape like PCX.. Analyzing the log of one of this agents the
    message below is informed:
    Mon May 9 04:41:10 2011
    CCMCTRL: ERROR: csm_show_file: no permission to
    read /usr/sap/PCX/SYS/profile/PCX_G34_zonepcx
    CCMCTRL: ERROR: csm_show_file: Please check sapccmsr.ini
    I tried to find the profile mentioned in the warning but with no
    succes. The cause of the shutdown of the agent is that because the
    correct profile is PCX_DVEBMGS34_zonepcx instead of PCX_G34_zonepcx but
    why it is looking for the wrong one when everything is configured with
    the profile PCX_DVEBMGS34_zonepcx . I also checked sapccmsr.ini but
    found nothing.
    I  can start the agent normally choosing the correct parameter
    (PCX_DVEBMGS34_zonepcx) but sometimes the agent shutdown by itself
    after 3-4 days with the error message above.
    Why the agent search for the wrong profile and where can I change it to
    the right profile ?
    Or is there any other way to resolve it.
    Thanks and Regards
    Ashwini

    Thank you Mani, I will make this test in only one appl server and monitor.
    I will let you know the resul of my tests.
    Regards

  • How do I get my iPad to stop shutting down by itself?

    How do I get my iPad to stop shutting down by itself?

    What do you mean by "shutting down"?
    Have your Reset it? Restored it from your backup? Restored it as a new device?

  • Why my 2009 desktop with OS Maverick keep shutting down by itself

    Why my 2009 desktop using OS Maverick keep shutting down by itself?

    When it shuts down, the screen blanks (more like turns grey, like the color of the background when on the log in screen). It reboots immediately, so at first the problem was presumed to be restarting, not shutting down and powering back on. The computer is usually very warm, and definitely gets hot easily. A test was run determine when the fan would turn on to start cooling the computer by running digits of Pi, and the tester concluded it was too close within the safe temperatures before it would permanently affect the computer. (I believe this was within 5ºF, but I am not 100% sure.) The times when it will turn off and reboot do not seem coorelated with much if anything. It has done this at multiple times, among running varying amounts of programs and for different lengths of time: right after logging into the user, within a minute of after it has turned off and rebooted, within 5 minutes, 10, 30, even 60 minutes of turning off and rebooting, when only running one program such as Firefox, when running various programs such as Firefox, iTunes, Microsoft Word, Sticky Notes....
    Basically, it makes no sense.

  • Internet wireless connection shuts down when iPhone in USB port

    Hi. I bought a new iPhone 3G 2 days ago. Whenever I plug it into my PC USB port to sync, my internet wireless connection shuts down (a dongle is plugged into another USB port). Have you heard of this happening before? Is it likely to be the iPhone, the new version of iTunes or the PC causing the problem? Many thanks for your assistance.

    Your welcome.
    A USB memory pen does not draw any power - as does the iPhone.
    Apple recommends connecting the iPhone direct to a USB 2.0 port on your computer - not to a USB hub if there is one available.
    Do you know if this computer has USB 1.1 or 2.0 ports? If the former, USB 1.1 is not supported.
    My PowerBook is approaching 4 years old and still going strong - running Apple's current operating system, but Snow Leopard will be comptible with Intel Macs only, so I'm reaching the end of the line OS version wise with my 4 year old Mac. I don't know many 4 year old PCs running Vista. My Mac has USB 2.0, and I regularly charge other USB devices while my iPhone is connected and while syncing - no problem.

  • I have a 2007 macbook that is stuck on the loading page and after a while it shuts down by itself. I don't know what to do anymore please help!!!

    I have a 2007 macbook that is stuck on the loading page and after a while it shuts down by itself. I don't know what to do anymore please help!!!

    Hello Sebas4224
    Start with the article below to troubleshoot issues with your MacBook starting up and staying on. Let me know how it goes in case it does not help and I or others can assist you further.
    Mac OS X: Gray screen appears during startup
    http://support.apple.com/kb/TS2570
    Regards,
    -Norm G.

  • Emctl shutting down by itself after a while

    I just got 10.1.0.3 installed and a 9i database converted. I can get the Database Control started (emctl start dbconsole) and use it, however, after a while emctl shuts down by itself. Below is what occurs in emagent.trc just before emctl shuts itself down - apparantly gracefully. All help appreciated
    Kirk
    2005-02-11 16:18:05 Thread-1827 ERROR http: 11: snmehl_read: error on read: A connection with a remote socket was reset by that socket. (error = 73)
    2005-02-11 16:18:05 Thread-1827 ERROR upload: FxferSend: HTTP Error=-1 reading request response from: http://serverxxx.university.edu:5500/em/upload/
    2005-02-11 16:18:05 Thread-1827 ERROR upload: Failed to upload file B0000197.xml, ret = -2
    2005-02-11 16:18:05 Thread-1702 ERROR http: 15: snmehl_read: error on read: A connection with a remote socket was reset by that socket. (error = 73)
    2005-02-11 16:18:05 Thread-1702 ERROR pingManager: nmepm_pingReposURL: Error in request response. code = 400. text =
    2005-02-11 16:18:05 Thread-1827 WARN http: snmehl_connect: connect failed to (serverxxx.university.edu:5500): A remote host refused an attempted connect operation. (error = 79)
    2005-02-11 16:18:05 Thread-1827 ERROR upload: FxferSend: Cannot connect to: http://serverxxx.university.edu:5500/em/upload/. retStatus=-32
    2005-02-11 16:18:05 Thread-1827 ERROR upload: Failed to upload file B0000197.xml, ret = -2
    2005-02-11 16:18:05 Thread-1702 WARN http: snmehl_connect: connect failed to (serverxxx.university.edu:5500): A remote host refused an attempted connect operation. (error = 79)
    2005-02-11 16:18:05 Thread-1702 ERROR pingManager: nmepm_pingReposURL: Cannot connect to http://serverxxx.university.edu:5500/em/upload/: retStatus=-32
    2005-02-11 16:18:05 Thread-1827 WARN http: snmehl_connect: connect failed to (serverxxx.university.edu:5500): A remote host refused an attempted connect operation. (error = 79)
    2005-02-11 16:18:05 Thread-1827 ERROR upload: FxferSend: Cannot connect to: http://serverxxx.university.edu:5500/em/upload/. retStatus=-32
    2005-02-11 16:18:05 Thread-1827 ERROR upload: Failed to upload file B0000197.xml, ret = -2
    2005-02-11 16:18:05 Thread-1827 ERROR upload: 3 Failures in a row for B0000197.xml, we give up
    2005-02-11 16:18:05 Thread-1827 ERROR upload: Error in uploadXMLFiles. Trying again in 123.00 seconds.
    2005-02-11 16:18:05 Thread-1717 WARN http: snmehl_connect: connect failed to (serverxxx.university.edu:5500): A remote host refused an attempted connect operation. (error = 79)
    2005-02-11 16:18:05 Thread-1717 ERROR upload: FxferSend: Cannot connect to: http://serverxxx.university.edu:5500/em/upload/. retStatus=-32
    2005-02-11 16:18:05 Thread-1717 ERROR upload: Failed to upload file B0000197.xml, ret = -2
    2005-02-11 16:18:05 Thread-1717 WARN http: snmehl_connect: connect failed to (serverxxx.university.edu:5500): A remote host refused an attempted connect operation. (error = 79)
    2005-02-11 16:18:05 Thread-1717 ERROR upload: FxferSend: Cannot connect to: http://serverxxx.university.edu:5500/em/upload/. retStatus=-32
    2005-02-11 16:18:05 Thread-1717 ERROR upload: Failed to upload file B0000197.xml, ret = -2
    2005-02-11 16:18:05 Thread-1717 WARN http: snmehl_connect: connect failed to (serverxxx.university.edu:5500): A remote host refused an attempted connect operation. (error = 79)
    2005-02-11 16:18:05 Thread-1717 ERROR upload: FxferSend: Cannot connect to: http://serverxxx.university.edu:5500/em/upload/. retStatus=-32
    2005-02-11 16:18:05 Thread-1717 ERROR upload: Failed to upload file B0000197.xml, ret = -2
    2005-02-11 16:18:05 Thread-1717 ERROR upload: 3 Failures in a row for B0000197.xml, we give up
    2005-02-11 16:18:05 Thread-1717 ERROR upload: Error in uploadXMLFiles. Trying again in 147.00 seconds.
    2005-02-11 16:18:05 Thread-1974 WARN http: snmehl_connect: connect failed to (serverxxx.university.edu:5500): A remote host refused an attempted connect operation. (error = 79)
    2005-02-11 16:18:05 Thread-1974 ERROR upload: FxferSend: Cannot connect to: http://serverxxx.university.edu:5500/em/upload/. retStatus=-32
    2005-02-11 16:18:05 Thread-1974 ERROR upload: Failed to upload file B0000197.xml, ret = -2
    2005-02-11 16:18:05 Thread-1974 WARN http: snmehl_connect: connect failed to (serverxxx.university.edu:5500): A remote host refused an attempted connect operation. (error = 79)
    2005-02-11 16:18:05 Thread-1974 ERROR upload: FxferSend: Cannot connect to: http://serverxxx.university.edu:5500/em/upload/. retStatus=-32
    2005-02-11 16:18:05 Thread-1974 ERROR upload: Failed to upload file B0000197.xml, ret = -2
    2005-02-11 16:18:05 Thread-1974 WARN http: snmehl_connect: connect failed to (serverxxx.university.edu:5500): A remote host refused an attempted connect operation. (error = 79)
    2005-02-11 16:18:05 Thread-1974 ERROR upload: FxferSend: Cannot connect to: http://serverxxx.university.edu:5500/em/upload/. retStatus=-32
    2005-02-11 16:18:05 Thread-1974 ERROR upload: Failed to upload file B0000197.xml, ret = -2
    2005-02-11 16:18:05 Thread-1974 ERROR upload: 3 Failures in a row for B0000197.xml, we give up
    2005-02-11 16:18:05 Thread-1974 ERROR upload: Error in uploadXMLFiles. Trying again in 176.00 seconds.
    2005-02-11 16:18:07 Thread-515 WARN http: 6,-1: nmehl_httpListener: signaled to exit from emctl

    Sathanga wrote:
    Hi,
    I have a Java application that runs on a Time clock (Hand held device). This app. has to be up and run all the times 24/7. After few days the app goes to hung stage, where we need to restart it manually. Is there a way, I can code within the app. itself, that restarts every night or so ....
    I searched through this forum earlier and did not get an answer. Appreciate your helps.
    Thanks
    SathThere is but a more important question is why does it quit every few days. Solve that problem and you'll be more ahead than with the solution you asked or originally.
    You can put the program on a timer and have ti launch every so often; you'll have to have it check to see if it's in memory when you do and if it is, then close the launcher and just let the previous running instance continue.

  • My apps shut down by itself

    My apps shut down by itself,this is very annoying when playing games etc.
    I have the 4G ipod touch

    Hi,
    Try a hard reset of your iPod:  Press/hold the *home* and *sleep/wake* buttons until the Apple logo appears. 
    Hope this helps! 

  • My iPhone 4 shuts down by itself

    I'm one of the few who are still using iPhone 4 , but anyway, I had this problem happened twice already today. The phone shuts down by itself. The screen becomes dead and black. I have to press and hold the wake/sleep button with the Home key at the same time for it to start. It works for a while, but then it happens again. Can anyone help? Appreciate it much.

    Hello there gilcelis99.
    The following Knowledge Base article offers up some great steps for troubleshooting the issue you're describing:
    iPhone: Hardware troubleshooting
    http://support.apple.com/kb/ts2802
    Particularly:
    Will not turn on, will not turn on unless connected to power, or unexpected power off
    Verify that the Sleep/Wake button functions. If it does not function, inspect it for signs of damage. If the button is damaged or is not functioning when pressed, seek service.
    Check if a Liquid Contact Indicator (LCI) is activated or there are signs of corrosion. Learn about LCIsand corrosion.
    Connect the iPhone to the iPhone's USB power adapter and let it charge for at least ten minutes.
    After at least 30 minutes, if:
    The home screen appears: The iPhone should be working. Update to the latest version of iOS if necessary. Continue charging it until it is completely charged and you see this battery icon in the upper-right corner of the screen . Then unplug the phone from power. If it immediately turns off, seek service.
    The low-battery image appears, even after the phone has charged for at least 20 minutes: See "iPhone displays the low-battery image and is unresponsive" symptom in this article.
    Something other than the Home screen or Low Battery image appears, continue with this article for further troubleshooting steps.
    If the iPhone did not turn on, reset it while connected to the iPhone USB power adapter.
    If the display turns on, go to step 4.
    If the display remains black, go to next step.
    Connect the iPhone to a computer and open iTunes. If iTunes recognizes the iPhone and indicates that it is in recovery mode, attempt to restore the iPhone. If the iPhone doesn't appear in iTunes or if you have difficulties in restoring the iPhone, see this article for further assistance.
    If restoring the iPhone resolved the issue, go to step 4. If restoring the iPhone did not solve the issue, seek service.
    Thanks for reaching out to Apple Support Communities.
    Cheers,
    Pedro.

  • MAC PRO shutting down by itself

    My mac pro keeps shutting down by itself, I can be doing anything and it just shuts down, now I tryed turning it back on it doesn't it keeps going on and off on and off so I unplugged it from the power supply, any ideas as of what it could be? Anyone?

    Unfortunately, I have no information on any ethical explanation as to why this is occurring, if you can provide any more information including everything you've done until the problem has occurred will be helpful to the resolution of your problem.. Once again, sorry about my inability to answer your question...

  • Airport Express shutting down by itself

    My AirPort Express is still shutting down by itself after using it for a while! I get a connection from my MacBook Pro for a while (green light), afterwards the LED is yellow and my Mac can not find the AirPort station anymore. So I restart the AirPort Express every time by switching it off. After this procedure it works for a while. Also restarts with the restart button do not help. The firmware is the new one; also the Mac has the latest version of OS.
    Please help - Thanks!

    So, the restart takes about 40 to 60 secounds. After restarting, the green lamp appears for few minutes and then restarting again (yellow lamp) and so on and so on. When I take the station off from electricity for a while the green period takes longer.
    Generally, the same problem appeared a couple of month ago, after playing around (I can't remember what) the station worked again, until I changed the place two days ago with disconnecting from power.
    So, maybe it's a software problem?

Maybe you are looking for

  • MailAPI SMTP sending error: 'Could not convert socket to TLS'

    I'm stucked with smtp authentication in a project. The process works on port 25 with no STARTTLS, but unfortunately our company server uses port 587 and STARTTLS. It seems that only the half of the authentication process could be successful, as the s

  • [PLEASE HELP!] Converting Flash (fla) to Animated Gif (gif) becomes pixelated!!!!

    Hey guys, Wondering if anyone can urgently help me please. I've got a FLA file making an animated banner. When I export it as an animated GIF, the background (which originally is a solid color) has either dots or crosses making up the color. I've tri

  • Problem in reading the modified text from text editor

    Hi all, Im using text editor for saving the long text entered in the text editor as standard text in So10 tcode. Here im facing an issue in reading the text from text editor. That is, when the text is entered by the user for first time, then the belo

  • Resource Bundles

    I am working on an internationalization project and I have a properties file that I am using right now to generate text in different languages. I would like to replace this with either a database or a java class. the problem is using the tag <f:loadb

  • APEX_PUBLIC_USER password expired and now APEX denies access to /pls/apex/f

    Hi. I have a problem with expired passwords. We are using APEX 2.2.0 with Oracle 10g. This morning the APEX_PUBLIC_USER and HTMLDB_PUBLIC_USER accounts passwords expired. We have a really weird setup. Our DBA team owns these accounts and our web serv