T60p that doesn't recognize battery? PLEASE HELP!
I have a T60p that I started having problems with the battery. It would not run on baterry, and the indicater light always flashed orange and dead. Well, I bought a new genuine battery and still the same problem! I know the battery is charged, as it works in other T60p's just fine. But my laptop acts as if its not even on the machine. When I unplug, it will not recognize or attempt to run on battery. Any idea's would be a great help as I don't really want to send it in to IBM support, and be out a laptop for who knows how long!
you probably have to send it in, something is is wrong with the MB hardware.
Similar Messages
-
Itunes doesn't recognize Ipod -- Please Help!
Greetings,
As the subject says, I cannot get my itunes to recognize my ipod. My ipod shows up fine under "my computer," and works normally everywhere else. I am running itunes 7.0.2, and Windows XP. I am constantly getting the error message about the ipod service module needs to close down. I've tried everything at the Apple support page, including, but not necessarily limited to --
1. Uninstalling/reinstalling itunes and Quicktime.
2. Resetting my ipod
3. Using msconfig to manually restart the ipod service module. This doesn't work because as soon as itunes opens, the service module shuts down.
4. Changing the USB connection I use to connect the ipod to my PC.
5. Restarting the PC with everything but itunes turned off.
Short of reinstalling Windows, something I really don't want to do, I am out of ideas. If I weren't already going bald, I'd be pulling my hair out.
Any ideas? Please?
Thanks,
JasonAnything here of help?
http://docs.info.apple.com/article.html?artnum=302420 -
My iPod 2G doesn't turn on. It is out of battery, but when I connect it to my charger it just continues to show the apple logo. It did that for 3hours straight. Please HELP!
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
I cannot open the new email icon for 10.6.8 including the latest security update. My old "Stamp" icon email won't let me in either indicating that the new OS version doesn't work. Please help. I have spend over 4 hours installing and reinstalling updates, etc. and I don't know where to go from here.....
Mac OS X v10.6: Mail.app won’t open, or "You can't use this version of Mail…" alert after installing Security Update 2012-004:
http://support.apple.com/kb/TS4424?viewlocale=en_US&locale=en_US
Fellow user Grant Bennet-Alder offers this solution:
Some users have reported this problem if the Mail Application has been moved out of the top-level /Applications folder, or duplicated in another location.
When the Security Update is done, the old version of Mail is disabled.
The solution has been to:
1) make certain Mail is in the /Applications folder
2) There is no other copy anywhere else.
3) Once steps 1 and 2 have been done, Manually download and re-apply the Security Update (2012-004) by hand.
Security Update 2012-004 (Snow Leopard)
If the Mail.app has been LOST, it can be re-installed by applying the 10.6.8 version 1.1 combo update. But this update is quite large and it is usually not necessary:
Mac OS X 10.6.8 Update Combo v1.1 -
I updated my ipad mini to ios7 and after that the restrictions have been turned on automatically. It was off before the update and I din do after either. I tried 1234 but it doesn't work. Please help me.
1. It is never a good idea to include personal info like your email address or Apple ID in a post on an open forum.
2. The email you received DOES NOT say your Apple ID cannot be used to unlock this iPad. The email informs you that your Apple ID was used to unlock an iPad. Fortunately the iPad is yours. The message confirms that. If your Apple ID was used to unlock an iPad that was not yours your would then know to change your password. Since the iPad is yours you do not need to change your password.
Is your iPad working? -
my ipad is on an infinite loop. I used ios7 for a few days and then did updates on some of my apps. that's when the infinite loop started. I have tried pressing the power and home button at the same time, but it doesn't work. Please help!
I even tried some hints posted for ios6 (turn off Ipad, holding home button and plugging in power cord at the same time and then releasing the home button)
I did manage to get a different screen that shows the itunes icon and a power cord, but nothing happens.You were on the right track. You got the connect to iTunes screen and you ended to use iTujes to restore your iPad. Try recovery mode again.
Recovery Mode Instructions
Disconnect the USB cable from the iPad, but leave the other end of the cable connected to your computer's USB port.
Turn off iPad: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for iPad to turn off.
If you cannot turn off iPad using the slider, press and hold the Sleep/Wake and Home buttons at the same time. When the iPad turns off, release the Sleep/Wake and Home buttons.
While pressing and holding the Home button, reconnect the USB cable to iPad. When you reconnect the USB cable, iPad should power on.
Continue holding the Home button until you see the "Connect to iTunes" screen. When this screen appears you can release the Home button.
If necessary, open iTunes. You should see the recovery mode alert that iTunes has detected an iPad in recovery mode.
Use iTunes to restore iPad. -
my iphone automatically locked and it does not open again,but if u call the sim that was inserted you will hear that it was active,so please help me how to open my iphone 4,no display appeared if you touch the switch button,
Hello arlyn-cavite,
If the screen is not showing anyting when you press any of the buttons you may want to try these steps.
From article iPhone: Hardware troubleshooting http://support.apple.com/kb/ts2802
Will not turn on, will not turn on unless connected to power, or unexpected power off
Verify that the Sleep/Wake button functions. If it does not function, inspect it for signs of damage. If the button is damaged or is not functioning when pressed, seek service.
Check if a Liquid Contact Indicator (LCI) is activated or there are signs of corrosion. Learn about LCIs and corrosion.
Connect the iPhone to the iPhone's USB power adapter and let it charge for at least ten minutes.
After at least 15 minutes, if:
The home screen appears: The iPhone should be working. Update to the latest version of iOS if necessary. Continue charging it until it is completely charged and you see this battery icon in the upper-right corner of the screen . Then unplug the phone from power. If it immediately turns off, seek service.
The low-battery image appears, even after the phone has charged for at least 20 minutes: See "iPhone displays the low-battery image and is unresponsive" symptom in this article.
Something other than the Home screen or Low Battery image appears, continue with this article for further troubleshooting steps.
If the iPhone did not turn on, reset it while connected to the iPhone USB power adapter.
If the display turns on, go to step 4.
If the display remains black, go to next step.
Connect the iPhone to a computer and open iTunes. If iTunes recognizes the iPhone and indicates that it is in recovery mode, attempt to restore the iPhone. If the iPhone doesn't appear in iTunes or if you have difficulties in restoring the iPhone, see this article for further assistance.
If restoring the iPhone resolved the issue, go to step 4. If restoring the iPhone did not solve the issue, seek service.
Take care,
Sterling -
[Acrobat X Standard] The tool box doesn't work. Please help!
[Acrobat X Standard] The tool box doesn't work. Please help!
I have a Acrobat X Standard.
When I open the documents, I can't click the tool box. but when I don't open the documents, I can use the tool box.
To solve the problem,
1. reinstall the menu.
2. reboot the computer.
But, It still didn't work.
Plz help!!Was it AA X Std that you had these options in (sorry, I only have Pro)? If it was the trial (that is Pro), it may be that Std does not have to feature. Under XI at the Adobe site, there is a comparison of features between Std and Pro that might give you a hint.
There is also an option to turn on or hide many tools. For me there is a small icon just above the tools...comment titles. If you select that it give a list of tools you can display. Often, several are not displayed by default. How you lost them is another things, but it is getting them that is the basic question. -
Hello, Please Help!
When I bring the mastered audio from Soundtrack pro back to final cut pro 7, the audio plays well at the beginning 3 mins later it doesn't sync.
Please Help!!!
EdgilMake sure your easy setup has the correct frame rate for your sequence. Seems crazy but somehow or other fcp assigns a frame rate to audio files. I've found this can sometimes be tricky to get right. Here's what I've done to force the issue. Make sure the easy setup frame rate reflects that of the target sequence in fcp. Create a new project. import the audio in the new project. And then copy the clip from the new project to your main project.
Good luck -
Hi, I just started a new movie and the program is running very slow. Is there a way to clean up my iMovie program so that it goes faster? Please help.
There is nothing you can do with iMovie program itself. Slow response in usually due to a shortage of system resources (CPU, RAM and disk space).
How much free disk space do you have on your boot drive and what is the capacity of the drive?
You can check memory utilization while running iMovie using Activity Monitor (in Applications/Utilities). What does the Memory tab show for Swap used?
Are you running many other processor-intensive applications a the same time?
If you have a lot of events and projects, it will help a bit to hide the ones you are not using by moving them from your iMovie Projects and iMovie Events folders into an enclosing folder so iMovie doesn't load them.
Geoff. -
In my icloud account on my iphone I have three ios devices. How do I manage the backup of my old phone ? I dont want to detete that backup completetly, just manage that phone back up ? Please help!
It will be backed up on your computer and can later be restored to an iOS device using iTunes, if desired. Of course, if your hard drive crashes you'll lose it if it isn't backed up somewhere else. If you want to included it in your computer backup, it will be located at one of the following locations:
Mac OS X: ~/Library/Application Support/MobileSync/Backup
Windows XP: %AppData%\Apple Computer\MobileSync\Backup
Windows Vista: %AppData%\Roaming\Apple Computer\MobileSync\Backup
Windows 7: %AppData%\Roaming\Apple Computer\MobileSync\Backup -
How do I pay for my storage plan when I don't have a credit card? Last year I used an iTunes voucher but can't find that option this year. Please help!
Create an iTunes credit by redeeming a gift card and it will be charged to your credit. From http://support.apple.com/kb/ht4874:
"payment methods accepted include iTunes store credit, credit cards, and debit cards" -
I restored my ipod and now the Nike app is crashing on me. I've tried turning it off and on again, but it still doesn't work. Please help.
Hi,
Have you tried a Reset...
Press and Hold the Sleep/Wake Button and the Home Button at the Same Time...
The Apple logo will Appear and then Disappear...
Usually takes about 15 - 20 Seconds...
Release the Buttons... -
hi, I was trying to update my iPhone 3gS but when I turn it on again iTunes send me a message that says error 3194 occurs, please help me!!
If the screen shows a plug going to itunes, then you have no choice, It's in recovery mode. You'll be given the chance to restore from a backup either from itunes or icloud.
I assume when you got the message to update (was this for the ios or update some apps?), that was before the device when dead. At any rate, doing a restore does not change the ios. -
My computer(A toshiba) crashed and when I bought a new computer(a Mac), my previous apple ID does not word and I was only able to get songs that I bought in 2004. I am unable to authorize my account to get to songs that I purchased recently. Please help.
Steve Taylor1 wrote:
If you have exceeded your allowance of 5 machines then Apple will not allow you to authorise additional Computers. If you still have access to your old toshiba fire it up de-authorise it and then try again with the new computer.
While this won't help if you are having password problems, I did want to point out that you do not need to access old machines to de-authorize them. Once you are signed in at the iTunes store, access "my account" by clicking on your username in the top navigation bar. Then "manage devices". You can remove any old machines that way.
Maybe you are looking for
-
How do i auto load "dhcpcd eth1"?
i have network card in my pc, but i use usb modem for internet. i add eth1="dhcp" in rc.conf, every time i need to type in terminal "dhcpcd eth1" then i can get work my internet. is that edit anything can skip that step?
-
Mass updates to move lots of positions to one org unit
Hi All, Can anybody tell me in SAP whether there is a transaction or way to perform mass updates to move lots of positions to one org unit ? Our users have to perform Re-org changes so they would like to know whether there is a way to move positions
-
Ipod touch shows picture to connect to itunes but,
The ipod touch won't turn on, it just shows a picture to connect to itunes. But when I try to connect to itunes it won't connect because it says the ipod is locked with a passcode. What do I do??
-
Restart Admin Login Credentials in Apex 4.0 & Oracle 11gr2
Hi all, We face a major issue. We are unable to connect our admin account for some unknown reason. We keep receiving the following message "Invalid Login Credentials". We tried to change the admin credentials with sqlplus. We tried the usual procedur
-
stuck in login page while i entered the correct or incorrect password or username. how can i leave this page? tried reset it but login again, same problem occurs. stuck on the login page. please help. thanks.