T60p - touchpad not in function

The touchpaad on my t60p is no longer function ( was ok one week ago).when using fn-f8 to enable it - i get the massage saying "ultranav driver not installed" have tried to install the driver (ultranav) downloaded fra Lenovo support but get a message saying that the driver is not for the hardware installed . when trying to remove and re-add hardware i cant find tuochpad anywhere .

are you sure you downloaded the correct version of the driver for your t60p?
T400s - 2815RW1 + Win7 Ultimate
Don't pm me for help! That's what the forum is for. Also, Google's nicer than me. Ask him.

Similar Messages

HP Pavilion g6-1c39ca touchpad not working

Hi, so i turned on my laptop today to find my touchpad not working, I did not change any of the settings. I am unable to enable the touchpad by tapping the cirlcle in the corner of the touchpad as it is broken. I tried to go to control panel-mouse-hardware and sound-mouse but there is no tab for device settings. After reading a couple of questions in the support forum I then downloaded the synaptic touchpad driver from hp support, but it could not be intalled correctly on my computer. Can someone please help me with this issue.

Hi @thomasand ,
Welcome to the HP Forums!
It is a superb place to find answers and information!
For you to have the best experience in the HP forum I would like to direct your attention to the HP Forums Guide Learn How to Post and More
I grasp that your TouchPad/ClickPad has stopped working. The round button in the upper left corner of the TouchPad is non functional. You went to the control panel-mouse-hardware and sound-mouse but there is no tab for device settings.
You tried downloading the software and drivers but were unable to install them.
Here is a link to HP Notebook PCs - Using and Configuring the TouchPad (Windows 7 and Vista) that may help.
If you still have this difficulty please contact HP support for assistance.
Please call our technical support at 800 474 6836. If you live outside the US/Canada Region, please click the link below to get a support number for your region.
World Wide Phone Support
Best of Luck!
Sparkles1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

[svn] 3045: Fix FB-13900: Expression Evaluator: 'is' and 'as' expressions return 'Target player does not support function calls'

Revision: 3045
Author: [email protected]
Date: 2008-08-29 10:59:25 -0700 (Fri, 29 Aug 2008)
Log Message:
Fix FB-13900: Expression Evaluator: 'is' and 'as' expressions return 'Target player does not support function calls'
Ticket Links:
http://bugs.adobe.com/jira/browse/FB-13900
Modified Paths:
flex/sdk/trunk/modules/debugger/src/java/flash/tools/debugger/concrete/BinaryOp.java
flex/sdk/trunk/modules/debugger/src/java/flash/tools/debugger/concrete/PlayerSession.java

Revision: 3045
Author: [email protected]
Date: 2008-08-29 10:59:25 -0700 (Fri, 29 Aug 2008)
Log Message:
Fix FB-13900: Expression Evaluator: 'is' and 'as' expressions return 'Target player does not support function calls'
Ticket Links:
http://bugs.adobe.com/jira/browse/FB-13900
Modified Paths:
flex/sdk/trunk/modules/debugger/src/java/flash/tools/debugger/concrete/BinaryOp.java
flex/sdk/trunk/modules/debugger/src/java/flash/tools/debugger/concrete/PlayerSession.java

"Bookmarks and history system will not be functional" with corrupt files found by Avast and websites loading slow ONLY in Firefox

Firefox is the only browser that lets me connect with my microphone. I need to use this feature for an online class. Earlier this evening, the message prompting me to allow or deny the class website permission to use the microphone stopped appearing, and without it the recording won't pick up any sound and I can't record anything.
I tried exiting and restarting Firefox. I had some extensions in use at the time, in particular Session Manager. The allow/deny message still wouldn't appear, so I restarted my computer.
Now when I open Firefox I see the "The bookmarks and history system will not be functional" error message. In addition, the browser loads websites extremely slowly; it takes several minutes to load each page or for me to be able to click on anything (the URL bar, the menus, etc) My other browsers (Internet Explorer and Chrome) are running normally and load websites at a normal speed. I tried downloading the latest version of Firefox but it didn't fix anything. I also tried restarting the computer again but that didn't help either.
I ran my Avast software system check and it turned up that the following files under "C:\Users\(me)\AppData\Roaming\Mozilla\Firefox\Profiles\Irozixj7.default" are "corrupted and unreadable":
-cookies.sqlite-shm
-cookies.sqlite-wal
-localstore.rdf
-places.sqlite-shm
There was one more problem on the scan, but it probably isn't relevant: for the file "C:\ProgramData\Microsoft\Windows Defender\Definition Updates\{9A2C6FA7-E04E-4819-B86A-8363A9D1E42A}\mpengine.dll" it says "The system cannot find the path specified." When I attempted to follow the path indicated, one of the folders (I can't remember which) said something along the lines of "You can't access this folder, do you want to permanently allow access to this folder?" I said yes and was able to access the folder.
I have tried to add the Places Maintenance extension but the speed is too sluggish to download anything. Trying to access any of the menus results in the browser freezing for several minutes then unfreezing but with the menu still unopened. Therefore none of the solutions found here (https://support.mozilla.org/en-US/kb/fix-bookmarks-and-history-will-not-be-functional?esab=a&as=aaq) seem to work.
My questions are as follows:
-Is it possible to figure out what caused the problem in the first place?
-Is there a way for me to fix it without losing my bookmarks and history?
-How can I avoid this happening again in the future?

First, I recommend backing up your Firefox settings in case something goes wrong. See [[Backing up your information]]. You can copy your entire Firefox profile folder somewhere outside of the Mozilla folder. To quickly access this folder:
Help > Troubleshooting Information > "Show Folder" button
Next, keep this folder open, exit Firefox, and try moving the "corrupted and unreadable" files to a different folder. With the exception of localstore.rdf, which stores window positions, toolbar customizations, and other nonessential data, the other files appear to be session-specific files that hopefully are not critical. If you restart Firefox, does it behave more normally?
If not, try creating a fresh Firefox profile. It will have the Flash plugin, which is the control sites usually use to connects your camera and/or microphone, and other plugins, but otherwise will be a new setup. This article has the steps for starting up in the Profile Manager: [[Use the Profile Manager to create and remove Firefox profiles]].
If sites work normally in the new profile, you can import your bookmarks from your old profile, as well as copying over other files that don't seem to be causing the problem. Some trial and error might be required to determine that. This article has some tips: [[Recovering important data from an old profile]].
If the new profile is no better, you can exit Firefox and use the Profile Manager to switch back to your original profile.
Any improvement?

MSI GS70 20D Touchpad not working after login when I upgraded to 8.1

Short situation: I upgraded my laptop to windows 8.1, and the touchpad stopped working on the start/desktop screens. I could move it before I logged in, and after it would work for a few seconds, but then it would just stop. An external mouse works just fine, but I still don't want my touchpad not working.
I looked on the MSI USA technical support page, and it said to delete the old drivers for the touchpad and download new ones. I deleted the drives, but every time I try to download the new ones, I get a window that says my touchpad isn't plugged in, and that the drive isn't compatible with my touchpad, which doesn't make sense to me because I looked up my product specifically and tried all three touchpad drivers. None of them worked.
Now I can't use the touchpad at all because I deleted the drivers, so it would seem that the computer doesn't know it has a touchpad because it won't register the touchpad in my devices tab.
Does anyone know what I can do to solve this? Or to at least get the touchpad to register again? I just got this computer for Christmas, I've treated it very well so it hasn't banged up against anything or been dropped or mistreated, so I cannot understand why this is happening. It worked before the 8.1 update, so I'm pretty sure the issue has something to do with that.

UPDATE: So I managed to fix the touch pad by deleting the driver and rebooting, which is weird because I removed the driver completely and never reinstalled it, so the computer shouldn't really know it has a touch pad. But every time I reboot the computer after fixing it, the touch pad goes back to it's old problem and I need to redelete and reboot all over again.
Also, My computer has begun to randomly freeze and not respond to anything, with one such event leading to a blue screen with a WHEA_UNCORRECTABLE_ERROR message. The computer has frozen a total of 6 times, at different moments; when I'm typing on microsoft word, at the login screen, even right when it starts up and the msi loading screen is up. 5 of these times have required a forced shut down, the first time the computer shut off on it's own because it ran out of battery power.
Finally, my computer has begun to periodically for long stretches of time stopped detecting wireless networks and is asking to be plugged into an ethernet cable to connect to the internet. This has never happened to me before, and I know I haven't turned off my network sharing center.
I'm not sure why this is all suddenly happening. It's not like I'm banging my laptop against walls. I'm very careful when I move and use my GS70, so these problems are greatly concerning to me because I just got this computer at Christmas.

Bug Report : Upgraded to Firefox v10. Holding CTRL+ [F4] too long after all tabs are closed causes error. "Exc in ev handl: TypeError: this.oPlg.onTabClosed is not a function"

Bug Report :
Upgraded to Firefox v10. Holding CTRL+ [F4] too long after all tabs are closed causes error.
"Exc in ev handl: TypeError: this.oPlg.onTabClosed is not a function"

What extensions do you have? (Go to Firefox > Customize > Add-ons to see or Help > Troubleshooting info for a copy-pasteable list)

I have the "Bookmarks and history system will not be functional" problem and not FireFox will not open at all and my whole computer freezes if I try.

For a few weeks now, I've been getting the "Bookmarks and history system will not be functional..." message. When I clicked for more information, FireFox would freeze.
I found a solution about a new places database, but for the past few days I can't get FireFox to open at all. Then my whole system is frozen and I have to turn it off to get it going again, thus losing a lot of unsaved data.
How can I get FireFox back?

A possible cause is a problem with the file places.sqlite that stores the bookmarks and the history.
*http://kb.mozillazine.org/Bookmarks_history_and_toolbar_buttons_not_working_-_Firefox
*https://support.mozilla.com/kb/The+bookmarks+and+history+system+will+not+be+functional

How can I restore previous session while fixing Bookmarks and History will not be functional...error?

I was working with two windows and 8-10 tabs in each window when my Firefox became unresponsive, and I received a string of JavaScript error prompts when I attempted any activity in the browser (such as scrolling). After about an hour of being unable to interact with Firefox at all, I Force Quit (on a Mac) the application.
When I opened Firefox again, it was taking a very long time to boot, and the process was locking up my computer, but eventually, I did receive a Restore Previous Session option. I tried restoring, but one tab in each window would stick and fail to load, causing the browser to freeze up yet again (one of the tabs was a Google search result page, which is completely benign). I had to Force Quit *again* and then a couple more times as I kept encountering the same issue.
Finally, I decided to restart my computer. I ran into the same problem. Then, I restarted again. Once more, the same problem. I actually tried restoring my session maybe 20 times before I ended up with the error: https://support.mozilla.org/en-US/kb/fix-bookmarks-and-history-will-not-be-functional?esab=a&as=aaq
I've followed step 1, which didn't work. I haven't proceeded to step 2, because I know I will definitely lose my previous session along with all recent history. I *need* to bookmark at least two of the tabs as they are of critical importance--one of which is a special URL that I cannot recover by any means.
Before I continue to step 2, is there any way that I can grab the URLs that were in my previous session and stash them somewhere to manually restore after fixing the error?
By the way, the crashing started when I tried to visit mail.google.com--typing that address in a new tab started the JavaScript errors when things had been running smoothly. I actually closed out several tabs when attempting to reopen my session, just trying to get things up and running again (and Save All Tabs) before I ran into the database error. I never got the opportunity to save my tabs.
I'm running Mac OS X Lion. Help?

Follow-up: I'm worried about performing any actions without input, because I don't want to back myself into a corner.
Will resetting Firefox fix the problem (instead of creating a new places database)? https://support.mozilla.org/en-US/kb/reset-firefox-easily-fix-most-problems
According to this article, a reset will keep browsing history, which should allow me to access my lost tabs IF it will also fix my database problem.

'setProgress is not a function' error while setting the progress of a progress bar manually

I want to set value of a progress bar in an accordian but I am encountering 'setProgress is not a function' error. Any idea what's wrong with following code.
Observation:
If I move the progress bar out of the Accordian then the error goes away and the progress bar appears fine.
I want to set the progress bar eventually to {repMonitor.currentItem.threatLevel} but for now I am just testing with hypothetical threat value i.e 60
    <mx:Accordion id="monAccordian" includeIn="Monitoring" x="10" y="10" width="554" height="242" change="monAccordianChange()" >
       <mx:Repeater id="repMonitor" dataProvider="{monitoringArray}">
          <mx:Canvas width="100%" height="100%" label="{repMonitor.currentItem.firstName+' '+ repMonitor.currentItem.lastName}" >
            <mx:Image x="10" y="10" source="{repMonitor.currentItem.imageName}" width="175" height="118"/>
              <s:Label x="200" y="14" text="Threat Level:"/>
              <mx:ProgressBar x="200" y="30" mode="manual" label="" id="bar" width="200" creationComplete="bar.setProgress(60,100);" />
          </mx:Canvas>
       </mx:Repeater>
    </mx:Accordion>

Okay.. Thanks.
On another forum I ve been told that I need to use getRepeaterItem. How can I use it to set my progress bar such the value of progress may be taken from repMonitor.currentItem.threatLevel?

Need help in finding the root cause the error 'Could not find function:'

Hi fokls,
In my workflow notification , when I click on the notification to process it , it says ' 'Could not find function:' error.
I found the this message is coming out from the Fnd_new_messages table from the message_name 'FND_FUNCTION_NOT_FOUND'.
Here are my questions ...
1. FND_FUNCTION_NOT_FOUND - Is it a oracle Seeded message ?
2. If so the error I am getting is a oracle product Bug ?
And In between , I am getting this error for few transaction only. ( out of 100 , i am getting this error at the rate of 5 per 100 ... or less)
3 .If its a oracle product bug then , how is 95 out of 100 transaction are succssfully wokring ?
4. If is a custom bug , how it os not though for some other 95 transaction ?
5. Can I expect it as Data issue ? If so what kind of data issue.
Folks , any kind of info will be really , realy helpful for me ... please let me know your inputs for me.
Thansk to all in advance
Raghu

In the error message 'Could not find function:' after colon what function name it is giving.
'FND_FUNCTION_NOT_FOUND' is a seeded message only.
As you are saying the error was throwing only for 5% or less notifications, is the error throwing for same kind of notifications? I mean the item type and message are same for these erroneous notifications?
It can be that some function in particular type of workflow is error-ed out does not exists, when responding to those kind of notifications it might be throwing error.
Please check that.
Edited by: sarojak on Nov 12, 2010 6:16 AM

CS3, MFC70.dll is missing JS Error - AQW.js, TypeError:AdvancedQueryWizard.preload is not a function

Hi guys,
BE SURE TO READ THE UPDATE BELOW....
I have searched both Google and the Forums, but cannot find anything on this one. Here is the history and both errors:
Recently upgraded to new machines with an upgrade to Windows 7 from XP prof. I personally installed the CS3 (web premium, upgraded from previous version) and all went well. The only change was that I did not install all of the previous versions of Dreamweaver, like I had on my old PC. I opened DW, pulled in all of my websites from the backup (work as a web developer/graphics designer) and all worked fine.
I left for Christmas vacation, remoted in a few times, so I know my laptop was fine, never lost power, etc., but never did have to open DW during that time.
Got back this week, had to make a change to a page that contains the XMLFlashSlideshow (v3). Opened Dreamweaver and got the first of two errors: "MFC70.DLL is Missing" The message indicated a reinstall would take care of the problem. I clicked ok, and then I got this error message:
While executing onLoad in AQWLoad.htm, the following JavaScript error(s) occured:
At line 60 of file "C:/Program Files (x86)\Adobe\Adobe Dreamweaver CS3\Configuration\Startup\..\Shared\AQW\AQW.js": TypeError:AdvancedQueryWizard.preload is not a function
When I clicked OK, the message appeared again immediately. I clicked ok again, and Dreamweaver began to open.
I figured I could make the change and troubleshoot after, but when I went in, I could not longer see the box I normally see to click on to edit for the slideshow. These error messages occur every time I open Dreamweaver, even after a reinstall. I did not have this page, nor even this site as the default when first opening DW when the errors first occurred.
UPDATE: These errors do not seem to occur the first time Dreamweaver is run, be do occur each time afterwards.
I have also noticed that I cannot print from Word 2007 to the Adobe printer driver as I always have. Not sure if that is related or not.
Any ideas, anyone else run into this?
Thanks for anything help you can send my way.
Thanks,
Suzanne

For the JS error: http://kb2.adobe.com/cps/405/kb405604.html
If mfc70.dll is really missing, that is a core Windows file. If you need to fix that you need to have your Windows 7 disc ready and run "sfc /scannow" in the command prompt. You may need your Windows 7 if the file cannot be repaired and has to be restored. This can affect all aspects of your system and not just Dreamweaver if there is really a problem there.
The Word -> Adobe Printer is another issue. You may want to post that in the Acrobat forums along with the version of Acrobat Professional you are using.

No longer able to add bookmarks on Yahoo Toolbar, Error message: "Exc in ev handl: TypeError: this.oRoot.enable is not a function" started when I updated to Firefox 6.0

Since updating to Firefox 6.0 I am no longer able to add bookmarks on Yahoo Toolbarl. I receive the following Java Error message: "Exc in ev handl: TypeError: this.oRoot.enable is not a function." When I hit the OK button in the error message it opens up "Add a Bookmark" and when I attempt to add the bookmark there I get this error message: "A problem occured while trying to save the bookmark. Please try again later."
Is this a comparability issue that you are not aware of? Below are the versions of Firefox and Yahoo Toolbar that I currently have installed:
Firefox: 6.0.02
Yahoo Toolbar: 2.4.0.20110815110908
Windows XP, Service Pack 3
I am having this issue on my laptop and desktop. Since I use both computers the Yahoo toolbar has been great for having my bookmarks available on both computers at the same time but no I don't have that feature. I'm told that Google's toolbar also doesn't work either.
Do you guys do any testing or Quality Assurance testing before releasing these versions?

Add-ons are the responsibility of their authors. McAfee does not even put their extension on http://addons.mozilla.org you had to install it from their site.
Disable "McAfee Site Advisor" extension which was just updated to 3.4.0, which probably took it out of the addons block list.
* "Ctrl+Shift+A" > find McAfee Site Advisor and use "Disable", and then restart Firefox.
* Do a Google Search no problem
* It seems that if you re-enable Site Advisor again, and restart Firefox you are okay. At least you know where to look if you get the error again or Google searches slow down.

When the apple review team review our app,they point out that our app uses a background mode but does not include functionality that requires that mode to run persistently.but in fact,when the app in background ,the app need data update to make the

when the apple review team review our app，they point out that our app uses a background mode but does not include functionality that requires that mode to run persistently。but in fact，when the app in background ，the app need data update to make the function of trajectory replay come ture。in fact， we have added function when the app is in background mode。we have point out the point to them by email。but they still have question on the background mode，we are confused，does anyone can help me，i still don't know why do review team can't find the data update when the app is in background and how do i modify the app，or what is the really problem they refered，do i misunderstand them？
the blow is the content of the review team email：
We found that your app uses a background mode but does not include functionality that requires that mode to run persistently. This behavior is not in compliance with the App Store Review Guidelines.
We noticed your app declares support for location in the UIBackgroundModes key in your Info.plist but does not include features that require persistent location.
It would be appropriate to add features that require persistent use of real-time location updates while the app is in the background or remove the "location" setting from the UIBackgroundModes key. If your application does not require persistent, real-time location updates, we recommend using the significant-change location service or the region monitoring location service.
For more information on these options, please see the "Starting the Significant-Change Location Service" and "Monitoring Shape-Based Regions" sections in the Location Awareness Programming Guide.
If you choose to add features that use the Location Background Mode, please include the following battery use disclaimer in your Application Description:
"Continued use of GPS running in the background can dramatically decrease battery life."
Additionally, at your earliest opportunity, please review the following question/s and provide as detailed information as you can in response. The more information you can provide upfront, the sooner we can complete your review.
We are unable to access the app in use in "http://www.wayding.com/waydingweb/article/12/139". Please provide us a valid demo video to show your app in use.
For discrete code-level questions, you may wish to consult with Apple Developer Technical Support. When the DTS engineer follows up with you, please be ready to provide:
- complete details of your rejection issue(s)
- screenshots
- steps to reproduce the issue(s)
- symbolicated crash logs - if your issue results in a crash log
If you have difficulty reproducing a reported issue, please try testing the workflow as described in <https://developer.apple.com/library/ios/qa/qa1764/>Technical Q&A QA1764: How to reproduce a crash or bug that only App Review or users are seeing.

Unfortunately, these forums here are all user to user; you might try the developer forums or get in touch with the team that you are working with.

T60p does not boot from new primary hard disk (Single-boot Linux/Fedora 14)

Hi,
I have just upgraded the primary disk in my T60p laptop (model 8742-C4G.) The BIOS recognised the disk fine, I partitioned it, marked the first partition as bootable, and then copied the OS (Fedora 14) and all my data back onto it. Then I installed the GRUB bootloader using the following commands:
grub> root (hd0,0)
grub> find /grub/stage1
grub> setup (hd0)
grub> quit
I've also tried installing GRUB with "setup (hd0,0)" instead of "setup (hd0)", without success.
This ran fine, exactly like with all the other PCs I've successfully performed this procedure on in the past. However, this laptop is refusing to boot from the new disk. There's no sign of any activity, either - just a flashing cursor in the top-left corner of the otherwise blank LCD panel. So I'm guessing that either the bootloader is failing immediately, or the laptop isn't executing the bootloader at all.
The laptop is running the very latest v1.18 BIOS, and there are no beeps, POST errors or anything like that. My previous disk booted into Fedora 14 without any difficulty at all, of course.
Can anyone suggest why the T60p is not booting, please? And also how to fix it? Is there any extra initialisation that I need to do in the BIOS, for example? (I haven't seen any...) The disk *does* appear in the BIOS's list of bootable media. Or maybe there's some special code that needs to be written into the MBR that GRUB doesn't know about?
The disk is a 320 GB 7200rpm Western Digital drive, and the Lenovo/IBM salesperson assured me that it was fully compatible with a T60p laptop without the need for any extra firmware.
Thanks in advance for any ideas, because I'm completely stumped at this point.
Cheers,
Chris
N.B. This is a Linux laptop, and so Windows-centric suggestions aren't going to help me.

You said you can't get into Windows safe mode, have you installed Windows on the hard drive? Are you able to get into the BIOS for the controller?
If you aren't able to access the BIOS for the controller, it may be due to bad RAM. If you are comfortable installing RAM and you have some extra laptop RAM of the same type (I think it's DDR3 for your controller) laying around, you can try swapping out the RAM.
Was your hard drive damaged through some event, or did it just stop working?
AC - LV Solver

TypeError: s.text(...).addClass is not a function on a Select list item jquery mobile theme

Hi.
i got a page with jquery mobile template, i got an select list item based on customers , when i touch the field, it display correcty all my customers, but when i try to pick some records i just get the error (i am using firefox firebug to see the error):
TypeError: s.text(...).addClass is not a function
...ollapsiblebound",!0).bind("expand collapse",function(t){var n=t.type==="collapse...
here is my query :
select
nombre_cliente || ' ' || apellidos_cliente a, codigo_cliente b
from sti_cliente
where
codigo_compania in (select distinct codigo_compania from STI_COMPANIA_SUCURSAL_USUARIO where upper(codigo_usuario) = upper(:APP_USER))
and estado_cliente = 'A'
and (MANEJA_INVENTARIO_CONSIGNACION = 'S'
and (codigo_compania, codigo_vendedor) in (select codigo_compania, codigo_vendedor from VTA_MAESTRO_VENDEDORES where codigo_usuario = upper(:APP_USER)) or cliente_contado = 'S')
order by nombre_cliente, apellidos_cliente
i have supress a dynamic action based on the field, but seems the problem is something within the query.
i am running on :
Application Express 4.2.4.00.08
Application Express Listener version : 2.0.5.287.04.27
Application Express Listener server info: Grizzly/1.9.49
thanks for any tip.

PLEASE DO NOT post to long since expired threads. The poster is probably NOT following this thread and your response doesn't really help them with their issue...
Elephants wear tu-tus so they can hide in pine trees. Did you ever see an elephant in a pine tree? No? Well then, you know it works.
Thank you,
Tony Miller
LuvMuffin Software
Ruckersville, VA

T60p - touchpad not in function

Similar Messages

Maybe you are looking for