T60p & Windows 7 Pro and Bluethoot problem with Access Connections.

Hi,
I reinstalled Windows 7 Pro (64bit) at my T60p laptop.
I use Access Connections (v. 5.97) manage my wi-fi, lan connections.
(installed with all features lan, wi-fi, modem etc.)
So here is problem.
When I start Access Connection. Bluethoot goes ON ...
Trying disable Bluetooth via Access connectios (Power Off), but it's still going "ON" and stays "ON"...
Any good solution to keep bluethoot off without disable it at bios?
Earlier version of Access Connections keeps bluetooth OFF...
/P

If you are not using the Bluetooth and you want to disable it, the easiest way is to disable the device in the Device Manager.
Go into the Device Manager by searching for Device Manager in the start menu, Open the Device Manager and select hardware, choose the Bluetooth device, right click, and finally choose 'disable'. If you want to use the Bluetooth device in the future you will have to return to the Device manager, right click and 'enable' the device.
I hope this information has been helpful, please let me know if you have any further questions.
Thank you for being a part of the Lenovo Family,
Catie
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Donate KUDOS and Click "Accepted Solution"

Similar Messages

I have problem with Access Connections on L412 after that utilyty upgrade

I have problem with Access Connections on L412 after that utilyty upgrade in early August. Windows 7 Ultimate/x64.
It stops connecting to WPA2 Enterprise (AES-CCMP), Microsoft PEAP, no server cert, with any credentials I try to use. The same account(s) works with native Intel manager on other notebooks and on mobile devices. I lost the wireless connectivity to enterprise WiFi network.
And, after deinstallation of Access Connections, the inability to connect keeped intact with native Win7 WiFi management.
I think, something was broken in Access Connections 5.83 Build 83C753WW and some registry settings/ dll modules were altered but not returned to normal after deinstall.

Access Connections is definitely broken for WPA encryption. Both versions 5.02 and 5.84 fail for me. If I use the Windows XP wireless configuration instead of Access Connections, everything works.
Does anyone know how to report this to Lenovo? I chased links around the web site but couldn't find a place.

Trying to install Itunes on windows 7 and having problems with windows installer

Trying to upgrade itunes 9 to 10 and updates through itunes have been unsuccessful. I have downloaded itunes 10 from Apple but when trying to install it on my computer I get the error message: " The windows installer service could not be accessed. This can occur if you are running windows in safe mode, or if the windows installer is not correctly installed. Contact your support personnel for assistance."
I also cannot uninstall itunes 9 as I get the same message.
Any ideas? I got an ipod touch for my birthday and I want to use it!!!!

Hi, I'm new here...from Malaysia. I also hav this problems last night...b4 that my iTunes working is ok...but last night i would like to connect my iPad to iTunes...there was an error Apple Application Support error2...
i had use the way teach bu b nior...but there was another erro when the installation of "AppleMobileDeviceSupport64.msi"
the error is "Service'Apple Mobile Device'(Apple Mobile Device) failed to start, Verify that you sufficient privileges to start system services."
what should i do now?

Problem with Access Connection

Hi there At the moment I am using Lenovo T61 with Vista Business & SP1. In addition I have got the Access Connection v 5.12 and Intel Wireless card number 4965agn.I saw that, when Wireless network is open my T61 can established connection with more than 130Mb transfer both by access connection and Vista systems settings. Unfortunately when I set WPA/WPA2 security my T61 by vista settings can establish connection more than 130Mb but by access connection is established only 54Mb. I also saw that Access connection establish 802.11g standard (when the WPA is set) instead 802.11n. (When Wireless network is open then established 802.11n standard).Is possible to get any hotfix to Access Connection to solve this problem? RegardsPawel

any idea?

Problem with Access Connections peer to peer comunity feature

I am working on a project at work and would really like to use the P2P Community feature in Access Connections. In testing, I discovered that when using the P2P Community feature the software configures the wireless adapter to a static IP address and static DNS server. When the laptop disconnects from the P2P community and reconnect to a Wifi network, it can't because the IP/DNS defaults don't revert back to automatic.
I could override the defaults by changing the settings in the location profile. But I work in a compay with 2000 laptops each has multiple connection profiles, not including the staff that have setup their own profiles. It would be unmanageable to update all the profiles.
Is there a solution to this issue?
thanks in advance

Do your AC profiles have the Override TCP/IP and DNS Defaults box "ticked" on the Additional Settings tab on the profile?
Also, are your current network settings on "Obtain an IP address automatically" and "Obtain DNS sevrer address automatically"?
Cheers,
Bill
I don't work for Lenovo

Select Max and ResultSet Problem With Access

The following code is producing a 'null pointer excepetion' error and I know why it is occurring I just do not know how to fix the problem.
Basically I want to automitically generate a unique ID that is one number higher than the max ID (data is stored within an Access database). The ID field is made up of first and last initial taken from parsing previous login info ('JS-01', 'JS-02', ect.). If there are no IDs in the database that match your login info I want to set the new ID equal to 'JS-01' if your login is 'James Smith' for example.
The problem is explained within the code below.
<%
//define resultset and statement
ResultSet rss=null;
ResultSet rs=null;
Statement stmt=null;
//HERE IS WHERE YOU PARSE THE LOGIN INFO
String finitial = (String)session.getAttribute("vfirst");//vfirst=JIM
String linitial = (String)session.getAttribute("vlast");//vlast=SMITH
char f = finitial.charAt(0);
char n = linitial.charAt(0);
String sID = f+""+n;//NOW sID CONTAINS 'JS'
try {
//Using the current database connection create a statement
stmt=con.createStatement();
//QUERY TO SELECT MAX ID
//NOTE: CURRENTLY THERE ARE NO IDs LIKE 'JS' IN THE DATABASE !!!!!!
String sql="SELECT Max(ID) As MaxID FROM tblError Where ID LIKE '%"+sID+"%'" ;
rs = stmt.executeQuery(sql);
String newID;
//HERE THE RESULT SET SHOULD BE NULL BUT IT IS NOT. I KNOW THIS BECAUSE WHEN I REPLACE String iID WITH A LITERAL LIKE 'JS-03' THE LOGIC WILL EXECUTE CORRECTLY AND GIVE ME 'JS-04'. IF I LEAVE THE CODE LIKE IT IS THEN I GET THE NULL POINTER VALUE ERROR BECAUSE YOU CANNOT RESOLVE "MaxID" WHEN THE RESULT SET IS NULL. IF THE RESULT SET IS NULL IT SHOULD NOT EVEN EXECUTE ANY OF THIS CODE WITHIN THE 'if' STATEMENT, BUT IT IS. SO BASICALLY JSP IS LEAVING ME WITH A MAJOR OXYMORON AND I WOULD APPRECIATE ANY ADVICE THAT WOULD HELP ME SOLVE THIS PROBLEM.
if(rs.next()){
String iID = rs.getString("MaxID");
String letters = iID.substring(0,3);
int numbers = Integer.parseInt(iID.substring(3,5));
numbers = numbers + 1;
if(numbers < 10){
newID = letters + "0" + numbers;}
else{
newID = letters + numbers;
else{//IF THERE IS NO RESULT SET THAN THE ID SHOULD BE 'JS-01'
newID = sID + "-01";
%>
Because this an Access database I cannot use any null exception functions such as NVL or COALESCE which are specific to Oracle and SQL Server I beleive.

The max() will return a result set, even if the max value is null.
You should check to see if iID is null.
if(rs.next())
   String iID = rs.getString("MaxID");
   if (iID == null)
       newID = sID + "-01";
   else
      String letters = iID.substring(0,3);
      ... etc ...
}

Problem with Access Connections

V100 with intel Wireless.
The wireless is working perfect but when I press Fn F5 I get this error message:
"No supported wireless adapter (802.11, WAN or Bluetooth) are installed in this system.
And I cannot switch off the BT at all.

Hi,
this is not directly and error, but a message, that is present usually also when you establish a correct internet connection.
This is the information, that the IP address is worng, or was till now not received and thus the system should refresh the IP address.
In this case I would advice to se the power mode to high performance of this one Wifi profile, that you are using, if this will make any change.
Cheers

Canon pixma pro 9500 having problems with my print out. colors are glazed and missing colors

canon pixma pro 9500 having problems with my print out. colors are glazed and missing colors
i have prfiled the mac and printer wiht colormunki and uplodated the profile sucessfully
i set the printer to correct icc profile
print out comes out same with glazed colors and missing tones/colors
however when i use the same printer on windows and with light room, following same icc profile, colormunki calibrated profile, the print our are excellent.
i have also tried using printer manage profile using the Mac and Aperture and get same poor prints
can you please assist and thanks

I've a Pro9000 and also use Colormunki successfully.
When I use Colormunki, I calibrate both of my monitors and the printer/paper combination. Colormunki saves the generated profiles to the correct places -- I don't load or change any profiles after that as that would mess-up what the Colormunki had just done for me, and this would likely mess-up the prints.
Though I double-check the settings in the print dialogue, the choice for the printer handling things is already grayed-out. Colorsync handles it all just fine.

Can i use a thunderbolt display for my macbook pro and hp laptop with windows 7 and what adapters will i need

Can i use a thunderbolt display for my macbook pro and hp laptop with windows 7 and what adapters will i need

Hi jayhrab,
Currently, the system requirements listed for an Apple Thunderbolt Display are:
Thunderbolt-enabled Mac computer, including MacBook Air, MacBook Pro, Mac mini, and iMac
OS X v10.6.8 or later
Apple - Thunderbolt Display - Read the tech specs.
Regards,
- Brenden

I have bought Adobe Photoshop Elements 10 last August 2013 and having problems with installing it on Windows 8.1?

I have bought Adobe Photoshop Elements 10 last August 2013 and having problems with installing it on Windows 8.1. Why am I having this problem?

You can check you Adobe account online to see if the serial number is registered under your account. If not then your only option will likely be to contact Adobe Support directly thru chat to see if they can provide you with a/the serial number. For them to do so will require you being able to prove ownership.
Serial number and activation chat support (non-CC)
http://helpx.adobe.com/x-productkb/global/service1.html ( http://adobe.ly/1aYjbSC )

Both xp and windows 7 have video problems with my VGA connection using TV

both xp and windows 7 have video problems with my VGA connection using TV as my monitor when it gets to starting up windows no matter what version it will not I have let my mac on all night and still says starting windows or the windows 7 logo and nothing else will happen also when I use a 3rd patty software like peraills or other it works like a charm how to fix it?

To map the drive on your computer click on Start - RUN - type "\\192.168.1.1" and click ok... When prompted for Username and Password type "admin" and click ok... Now you will be able to see the folder which you have shared on your router, right click on it and select "Map network drive" and click on finish.
Now it will map the drive on your computer and you should be able to transfer the file from your computer to the USB drive.

Lion 10.7.2 On both mac book pro and iMac, both with Lion 10.7.2, obtain repeated iCal event notifications from calendar or address book. Cannot turn these off. They repeat several times per session and every time computer is used. How to diagnose this

Lion 10.7.2 On both mac book pro and iMac, both with Lion 10.7.2, obtain repeated iCal event notifications from calendar or address book. Cannot turn these off. They repeat several times per session and every time computer is used. How to diagnose this?

First, uninstall "SuperTV" (whatever that is) according to the developer's instructions. It isn't working and it's filling the log with noise.
If you have more than one user account, these instructions must be carried out as an administrator.
Launch the Console application.
Step 1
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left.
Enter "BOOT_TIME" (without the quotes) in the search box. Note the timestamps of those log messages, which refer to the times when the system was booted. Now clear the search box and scroll back in the log to the last boot time when you had the problem. Post the messages logged before the boot, while the system was unresponsive or was failing to shut down. Please include the BOOT_TIME message at the end of the log extract.
Post the log text, please, not a screenshot. If there are runs of repeated messages, post only one example of each. Don’t post many repetitions of the same message. When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
PLEASE DO NOT INDISCRIMINATELY DUMP THOUSANDS OF LINES FROM THE LOG INTO A MESSAGE. If you do that, I will not respond.
Important: Some private information, such as your name, may appear in the log. Edit it out by search-and-replace in a text editor before posting.
Step 2
Still in Console, look under System Diagnostic Reports for crash or panic logs, and post the most recent one, if any. In the interest of privacy, I suggest you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if present (it may not be.) Please don’t post shutdownStall, spin, or hang logs — they're very long and not helpful.

Mail and iPhoto Problems with sending photos.

Mail and iPhoto Problems with sending photos.
I have this problem that started a while ago and seems to be getting worse.
Here are the different scenarios.
-If I try to share a photo to email within iPhoto, it will insert the image file name in the mail message, but no image icon or opened image. In iPhoto Preferences under General I have chosen to use Email Photos using Mail.
-If I choose to use iPhoto to send the photo, it will compose the message and the photo is viewable. If I send the message i can view the photo within the email I sent to myself. Nothing happens when I double click on the photo in the Mail message. Nothing happens when i control click on the photo in the mail message. Nothing happens when I try to drag the photo to the desktop from the mail message. When I try to save attachments from the email and choose a place to save it, the save button is grayed out and it cannot be saved. When I check the mail message it says there is an attachemnt but there is no file size listed.
-If I use the stationary within Mail app I cannot drag a photo into the placeholder, I get a circle with a line through it symbol when I try. It happens if I try to drag a photo from the desktop or from the media browser within Mail app.
-If I drag the photo to the desktop from iPhoto, I can double click it on the desktop and it will open in Preview.
-If I then control click on the same photo on the desktop and scroll to share/email, the generic photo icon will be inserted in the mail message. If i double click the photo icon in the mail message I get a message it can't be opened because it is empty.
-If I drag that same image to the mail message body the same thing happens.
-If I send that email to someone they cannot open the image file.
What I can do:
- I can drag that same image file on the desktop to my dropbox folder and it will upload. From there I can go on my iPad and download the photo and send it through email just fine.
-I can open the same image file on my desktop in Preview, I can copy and paste it into a mail message and the image will be viewable in the mail message by me and by the recipient.
-I can drag that same image on the desktop to my safari browser window and it will be viewable in the page. i can then copy and paste that image into a mail message and it is viewable in the message. I can then send that email message to myself and i can control click on the image and get all my options. It also shows as an attachment with the size of the image file in the mail message.
I can send that message to someone and they can see the photo and open it fine.
-If I send that same email to me I can see the photo within the mail. If I then drag that photo to the desktop I cannot use it again to put in an email as the same problem happens again.
I have tried all scenarios in my user account, another users account and in a guest account. The same happens in all. I am guessing because of this it is not a corrupt preference file, unless all of the preference files are corrupt. The guest user account I added a new email account so it was brand new and still had the problem.
I am stumped, all and any help is appreciated.

Another problem that may be related….
I have Snapz Pro. I used to be able to save the snaps to my desktop or a folder. Now when I take a screenshot and try to save the file to my desktop or a folder on my desktop I get this message "Files cannot be created in the selected location. You do not have permission to write to the selected location. Please choose a different location." I have found that i can only save the file to the clipboard. I have repaired permissions many times and still I have this problem.

Can Play iTunes Library from PC on MacBook Air but cannot import, problem with access rights?

I can play Itunes library from Windows Vista PC on my MacBook Air using homeshare but cannot import the library . Error message is problem with access rights. Latest OS and Itunes installed. Both computers registered with Apple on same Apple ID. Wifi Router turned on and off. Still does not allow importing. Any suggestions please?

Might be an alternative for you here > iTunes: How to move your music to a new computer

Just wondering if anyone has a problem with accessing iTunes store. have iTunes installed but can't bring up the store home page?

Just wondering if anyone has a problem with accessing iTunes store. have iTunes installed but can't bring up the store home page?

i have the same problem! Safari won't work either. Can anyone help please? I have completely restored my computer trying to fix this and it still won't work! I have a 2 month old alienware laptop running windows 7

T60p & Windows 7 Pro and Bluethoot problem with Access Connections.

Similar Messages

Maybe you are looking for