T61 7661-HM5 New - Can not dectect wireless card ???

I have a new laptop T61 7661-HM5 with Product Infomation:
Based on 7661-CTO: T7300(2GHz), 2GB RAM, 60GB 5400rpm HD, 14.1in 1280x800 LCD, Intel X3100,
CDRW/DVDRW, Intel 802.11agn wireless(disabled),
Modem, 1Gb Ethernet, UltraNav, Secure chip, Fingerprint reader, 6c Li-Ion, WinVista Business 32
Currently I installed driver wireless card at:
http://www-307.ibm.com/pc/support/site.wss/document.do?sitestyle=lenovo&lndocid=MIGR-67256
I turned on button SWITCH ON on laptop and enable Wireless Radio ON in BIOS but It can't dectect
wireless card.
How can enable Wireless internal card on this laptop ???
Please help me !

Remove the driver and install this:
Intel Wireless LAN (bg, abg, abgn) for Windows 7 (32-bit, 64-bit), Vista (32-bit, 64-bit), XP - Thin...
Did you install the Vista Service Packs? Some Drivers and tools require service packs.
Also have a look to the requirements
My home-forum: http://www.thinkpad-forum.de
Wiki: Deutsches ThinkPad-Wiki English ThinkWiki
My ThinkPad-Collection

Similar Messages

Can not detect wireless card

WRE54G / Win XP SR2
My laptop and PDA can connect to the network wirelessly with no problems.
Trying to connect my WRE54G to my network. On every attempt at AutoConfigure nothing happens. Have disabled router security and 'SPI Firewall' (whatever that is). Still nothing. Have disabled router security and 'SPI Firewall' (whatever that is), and McAfee Firewall. Still nothing. I have moved the WRE54G to within ~4 feet of the router and tried everything again. Still nothing.
I have tried Setup but when I hit 'Next' I get the popup "Can not detect wireless card."
Have tried a reset and have unplugged/replugged the WRE54G. FWIW, the WRE54G 'Link' light blinks blue once for about a second and turns a constant red. The 'Activity' light blinks blue twice quickly about every 5 seconds. Nothing on my PC shows any response.
What is the wireless card that can't be found? The WRE54G?
How do I resolve this?
33#44

this worked for me too. Although I was never able to use the cisco install wizard successfully. I am using WEP security on my access point. I took the following steps.
1. From laptop, connect to network wirelessly with WEP security settings in place
2. From laptop, open browser, go to: 192.168.1.1, select wireless security, disable wireless security
3. From Range Extender, hold auto-configure button. It took me multiple attempts (~5) and it connected so the 'Link' light changed from red to a consistent blue.
4. From laptop, disable security for the access point (via control panel, wireless network connection settings)
5. From laptop, connect to wireless access point (via control panel, wireless network connection settings). test internet connection. Internet should work.
6. From laptop, access range extender web utility. open browser, got to 192.168.1.240, enable security, input desired WEP security settings/passphrase.
7. From laptop, enable wireless security for the access point. from browser, go to 192.168.1.1, select wireless security and enable it. use the same settings from step 6 (from the range extender).
8. From laptop, update wireless adapter settings to connect using the same security settings (eg. passphrase) from step 6/7.
range extender, access point and wireless adapter/laptop should all be connected.

HT6012 In this new version Ability than original version of Export., In a lot of older Eprot several types of Vdo. But the new can not just mp4.

In this new version Ability than original version of Export., In a lot of older Eprot several types of Vdo. But the new can not just mp4.

Yes, the old album art view is gone, bu you can see the album art for a song that's playing by clicking on the art image and it will open a bigger view.
Everything else in your post is a waste. I'm not going to spend time reading it. If - and I repeat if, you have a question on how to get the best out of the new look iTunes, post it. But don't spend your time in long rambling negative rants.

TS1292 can not redeem itunes card , have tried to get help like 6 times nothing suggested via trouble shooting page has helped and can not get a person to help

I can not get itunes card to work says inactive. have followed all trouble shooting and can not get through to support via email or phone

If the card hasn't been activated properly then have you tried taking it back to the store that you bought it from and asking them to activate it properly ?
How have you tried to contact iTunes Support ? You should be able to do so via this page (you will probably need to give them images of the front and back of the card, and possibly its receipt) : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then iTunes Cards And Codes. If that page doesn't load then have you tried clearing your browser's cache/history and/or tried a different browser ?

Help me. I can not add credit card in the AppStore iPhone 4

Hi
I use the Iphone 4 , iOS 4.3.1, but recently I can not use my credit card with the iPhone appstore. itunes store with online payment and credit card is used as normal, but I can not use credit cards to buy the game directly in my iPhone. please help me find the cause of it ..
Thanks

What happens when you try to buy them, does the 'buy' button not work, do you get any error messages ... ?
If you are getting a message to contact iTunes Support then you can do so via this link and ask them for help (we are fellow users on these forums, we won't know why the message is appearing) : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption
If it's a different problem ... ?

Suddenly slowed to move the icons began speech, press twice the emails etc while I can not unlock the card why do not I arithmologio

suddenly slowed to move the icons began speech, press twice the emails etc while I can not unlock the card why do not I arithmologio

I'm afraid the language translation program you used has let you down. Can you rephrase your question (assuming you can understand me).

HT1918 I can not purchase credit card. In the game Clash Of Calns please help

I can not purchase credit card. In the game Clash Of Calns please help

What happens when you try to buy them, does the 'buy' button not work, do you get any error messages ... ?
If you are getting a message to contact iTunes Support then you can do so via this link and ask them for help (we are fellow users on these forums, we won't know why the message is appearing) : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption
If it's a different problem ... ?

Can not find sim card

I already insert Sim card but iPad can not find Sim card and show non Sim card

Restart the Ipad. I have done that when I first put it in and that solved it. I held the home and power button at the same time to restart though. Also make sure the sim is in the right way.

HT1918 hello i have moved countries from uk to australia i can not change credit card and address information nas it says 1 incomplete pass? i dont know how to delete that so i can move forward on this subject please can you assist me? thanx jason buckha

hello i have moved countries from uk to australia i can not change credit card and address information nas it says 1 incomplete pass? i dont know how to delete that so i can move forward on this subject please can you assist me? thanx jason buckham [email protected]

You'll need to contact support to have your account checked
https://expresslane.apple.com/GetproductgroupList.action

V570 can not see wireless n connection

Hello, I just bought a V570 5 days ago and noticed that the wireless adapter does not find my 802.11n signal but only the 802.11g signal. While the 2.4 GHz connection is ok, I expected to be able to connect to the faster network. I've tried to set up the connection manually it still does not show in the available list of connections. I've tried putting my new laptop within 2 feet of the router - no luck.
This is not a problem with my router - my work laptop (2 year old Lenovo ThinkPad) connects to my "n" network without a problem, as does my cell phone. I've checked the adapter settings and have the defaults set - 802.11n Channel Width for Band 2.4 set to 20 MHz and and 802.11n Mode enabled.
What I find interesting is that when I look at the adapter settings on my work laptop, it shows a setting that my new one does NOT have - 802.11n Channel Width for Band 5.2. Why do I not see this setting on my new laptop. Is this a problem? While I like the laptop, this is bugging me enough to return it if I don't find a solution soon.
Thanks for any help.
Solved!
Go to Solution.

Yeah, I know it's a bummer.
I was "burned" by this issue, when I bought my Y470. I just "assumed" that a brand new laptop, would include a wireless card that supported both channels. What I found out, after I received my new system, was that almost ALL laptops coming from Lenovo, only have B/G/N 2.4 Ghz cards. If you want a card with 5Ghz "A" support, you must upgrade the card in your original configuration order. The real kicker is, if you use the Lenovo outlet web pages to buy your system, you can not upgrade most of Idea Pads wireless cards. Those type of upgrades, seem to be only "offered" on Think Pad systems.
However, you can still buy, and install, and upgraded wireless card. I'm just not sure where you can buy it, and still be under warranty. See this thread:
http://forum.lenovo.com/t5/IdeaPad-Y-U-V-and-Z-series/Upgrading-wireless-card-in-Y470/m-p/476833#M39...
You would think that Lenovo would have a "parts" outlet web site, that I could go to and order an upgraded wireless card. But it's like pulling teeth, to get any kind of "after purchase" upgrade information out of them. I guess they're too busy selling their systems, instead of making sure they get "brand loyalty" such as IBM once did.
Still, I'm very happy with my Y470. And as I've said, I get a 144 Mbs connection using the OEM wireless card. I had to fiddle with my connection settings on the card, and also on my E3200 router, to achieve the 144, but I've gotten good range on the 802.11N, 2.4 Ghz connection. After all, isn't that what it's all about, anyway?
DragonRider
I'm DO'ing IT
Lenovo Y470 085525U 2nd generation Intel® Core™ i7-2630QM processor ( 2.00GHz 1333MHz 6MB )
IdeaCentre A520 Intel® Core™ i5-3230M processor ( 2.60GHz 2600MHz 3MB )
YOGA Tablet 2 Pro-1380F
X1 Carbon 2nd Gen (20A8) ThinkPad + T420

W7 PCs on router LAN port can not find Wireless connected OJ Pro 8500A Plus following router upgrade

My Broadband Supplier has replaced my internet router with a new one with dual N band Wireless and GigE LAN ports. The 8500A printer has been successfully WPA wirelessly connected and works fine with a wireless connected Sony windows 7 laptop and Apple devices. However neither of the Dell LAN connected windows 7 desktop PCs or the same Sony laptop when connected to a LAN port on the router can find the printer. I have tried reinstalling the printer software with the latest version from the HP site OJ8500_A910_1315 and the installation fails as network environment checker can not find the printer. I have run the HP network diagnostics with both firewalls in the PC and router disabled with no success. The LAN itself seems to be working OK as the PCs can see each other, exchange files and and can access the internet. The router has been checked by the broadband supplier technical uupport. The printer is visible as a network connected device in Windows explorer so you would expect the HP software to see it. Is the only option to fix the printers IP address and use that in the installion procedure or are there other settings I can alter to get the HP network environment checker to work properly? Thoughts would be appreciated.
This question was solved.
View Solution.

In the router settings look for "wireless isolation", "AP isolation" or the like and make sure it is DISABLED. This setting disables communication between the wired and wireless clients.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

Can not see wireless TM in disk utility or desktop.

Am I running a TM Airport (router) it runs great, I love everything about it and the backups have no issues.
But I wanted to partition my 500mb drive on my TM yet for some reason I can not see the drive either on my desktop or in disk utility. Is there some setting I need to change somewhere else to be able to view this wireless drive and configure it? I looked via Airport Utility and the only option there is to archive or erase it, at least that can see it.
When the backup starts I do see a mounted drive show up.
Any ideas?

It does not show up because when I am not backing up, it gets disconnected...

Can not see wireless access point

I've wired both my laptop (windows7) and my wireless access point (wap54g) to my functional Neatgear switch. When I run the Linksys setup cd (from my laptop) I get the following message ...Can not locate a wap on this network. What am I doing wrong? Everything is powered up and all 3 lights on the wap are on.
Please help...

Have you tired to configure the WAP54G manually? If not you may try to connect your laptop directly to the access point's ethernet port and please make sure that the laptop has the same network IP as of the access point (192.168.1.***) then try to access the WAP54G set-up page via browser for you to configure it.

Can not find wireless signal on laptop?

I've had an ACER laptop for some time now, and I've been using Linksys wireless routers. They've never been stable with my laptop. I thought I could solve it by buying a new router the Linsys WRT150N, and I got a Linksys wireless card for the laptop, all installed successfully. Till my laptop will not find the wireless signal and I find quite often I'm connected to my neighbours wireless from across the street!!

Well in this case if you connect the modem directly to the laptop are you online?? if no...contact your ISP to get the internet connection.If yes, then connect modem>>>>router>>>>laptop with an ethernet cable & reset the router for 30 secs in such a way that power light is blinking on the router.Also, do the complete network power cycle i.e., unplug the power cables from the modem & from the router...now plug in the power cable to the modem first once all the lights are solid green plug in the power cable to the router...& you will be ONLINE!!!

Pavilion s-1217 can not find wireless Canon printer

I have an HP printer but I can not afford to feed it, due to the tri-color cartilages.
I bought a Canon wireless printer and my 2 other HP computers can see it and use it. My Pavilion s-1217 can not see it.
My printer has been checked by Canon and my Router has been checked and upgraded by Belkin. Both are working fine.
I have called HP several times about this computer. The last time, the tech downloaded the HP Print and Scan Doctor but it also can not see this printer.
Canon suggested that this computer may not be able to use IPv4.
This question was solved.
View Solution.

I did get help that solved my problem but @
http://www.extremetechsupport.com
A free forum where computer geeks help those who aren’t. Here is the exchange:
I bought a Canon wireless printer and my 2 other HP computers can see it and use it. My Pavilion s-1217 can not see it.
My printer has been checked by Canon and my Router has been checked and upgraded by Belkin. Both are working fine.
I have called HP several times about this computer. The last time, your tech downloaded the HP Print and Scan Doctor software but it can not see this printer.
Canon suggested that the computer may not be able to use IPv4.
AWS: “I think maybe the tech meant it can't use IPV6 as IPV4 is the standard. If your computer couldn't use IPV4 then you wouldn't be able to use the internet at all “
No, the Canon tech stated that this printer uses IPv4. The IPv4 address, according to the print out of the printer's Network Configuration Page is 192.168.2.4. No IPv6 address is listed. The Belkin tech stated that IPv4 is "almost obsolete" and the firmware upgrade he installed had an update to the IPv6 capabilities but no change in IPv4. All three devices are under warrantee and the both the Canon tech and several HP techs have taken remote control of this computer and installed the latest Canon drivers from the Canon website. HP says it is a software problem and that there is nothing wrong with the computer so they will not allow it to be returned. Belkin (one HP tech blamed the Belkin N750 router) and Canon techs say their equipment is working properly and, indeed it does from the two other HP computers we have.
Cindy E: To reset IPv4 “Select Control Panel > Select Network and Sharing Center > Change Adapter Settings.
“Right-click on the Ethernet connection you want to modify > Select Properties > Double click on Internet Protocol Version 4 (TCP/IPv4) > These are your IP address settings. When you are finished, select OK and in the last window click OK again.”
That did it the printer is working fine now

T61 7661-HM5 New - Can not dectect wireless card ???

Similar Messages

Maybe you are looking for