T61 [7663-V5M] XP ENG SP3 AND CONNECTION VIA NOKIA PC SUITE WITH NOKIA 6230i

Hi everyone,
I've got T61 and Nokia 6230i. I'm not able to establish connection between T61 and Nokia 6230i via Nokia Pc Suite. When I try to connect those two devices via Nokia Ps Suite. I've got error message that connection can't be established. BT is in both devices enabled.
-> IBM T61 - XP PROF ENG SP3 BIOS NEWEST VERSION
-> NOKIA 6230i - OS VER. 3.89
The funniest thing is this that I can connect T61 and Nokia 6230i without Nokia Pc Suite.
What could be wrong? Why I'm not able to connect via Nokia Pc Suite? How can I solve this problem?
This is not a simlar problem as in post http://forums.lenovo.com/lnv/board/message?board.id=T_Series_Thinkpads&thread.id=24380; ! ! !
Message Edited by cubus1981 on 12-07-2008 12:04 PM
Message Edited by cubus1981 on 12-07-2008 12:05 PM
Message Edited by cubus1981 on 12-07-2008 12:14 PM
Message Edited by cubus1981 on 12-07-2008 12:15 PM
Tak rób, jakbyś miał wiecznie żyć, a żyj tak, jakbyś miał jutro umrzeć

Hey...sorry if you are expecting for an answer but I would like to inquire to you my problem, hoping that you have through this also or someone asked you of the same problem
This is my problem...when I used NokiaSoftwareUpdater, my memory card then have a password which I never remember putting...I have gone through the discussions and I have found out that many too have the same problem... What am gonna do..plss help...

Similar Messages

Why can I not access My iPhone on my Air - they have the same cloud account - same iTunes - logged onto the same wifi network... and connected via USB - difficult much?!its killing me ahhh my screen smashed and i want access to my iPhone on my macbook

Why can I not access My iPhone on my Air - they have the same cloud account - same iTunes - logged onto the same wifi network... and connected via USB - difficult much?!its killing me ahhh my screen smashed and i want access to my iPhone on my macbook..
why is it sooo hard still --- can anyone inform me on this miracle app please
thank you
sincerely
Theigalaxy

find my iphone is something one needs to activate on the phone itself using the same appelID is nowhere near enough
if it is then one can track, play a sound and remote whipe it from
www.icloud.com
if your screen is smashed and you think you can use find my iphone to get any data from your phone you are sadly mistaken

How can i use my iPhone 4 and connect via bluetooth with my macpro

how can i use my iPhone 4 and connect via bluetooth with my macpro

The only way that you can connect your iPhone to the mac is to use it for a "Wi-fi hotspot" meaning that you can use the celluar connectivity of your phone to connect your computer to the interent.
Do you mean a MacBook Pro of the desktop MacPro?

Extend network AND connect via ethernet?

How do I configure Airport Express to extend my network wirelessly and connect a computer via Ethernet?
I have 2 buildings at my church I am in charge of getting this to work in. The office building has a wireless network, the sanctuary has no ethernet or wireless at all. I can get a good signal to an Airport Express I just purchased inside the sanctuary and I am using that to feed internet to the PowerMac G4 that doesnt seem to see the network from the Office area. I was told that this could also extend my wireless network to the other computers in the sanctuary. I have not been able to get this to happen.
I succesfully have it in "Join a Network" mode and it grabs the signal and gets internet to the G4. As soon as I change the mode to "Extend my network", I lose all connectivity with the network. In addition, no matter what mode I am in, I can't see this Airport from any devices wirelessly either in the utility or in the Airport browser.
So...how do I allow other machines/tablets/etc to use this airport to hook in to our network AND use the Ethernet line to feed the G4?
Thanks,
Joey

I am going from an Airport Extreme 4th gen (dual band) to an Airport Express 2nd gen (just replaced thanks to the Genius Bar, it used to be a 1st gen. single band) and then picking it up with another Express 2nd gen.
That.....is the problem.
I had understood from your initial post that you had an AirPort Extreme and wanted to extend to several AirPort Express devices.
Apple's "extend" setup works like the hub and spokes of a wheel. The AirPort Extreme would be the "hub" and the AirPort Expresses would reside at the end of the "spokes".
You can have multiple AirPort Express devices located at the ends of the spokes, but in order to "extend", each one of the them must connect directly to the "hub".....not to another extending device at the end of another spoke.
What you are trying to set up is a "hub", "relay" and "remote". Unfortunately, Apple's "extend" setup does not work this way.
The distant remote can pick up a signal from an Express at the end of a spoke acting as an extender, but the distant remote cannot "extend" the signal from an Express at the end of a spoke using wireless.
The distant remote is actually joining the network....that is why the Ethernet port is active....but unfortunately, there will be no wireless signal from this device.
Somewhere, an Express will need to connect back to the Extreme using a wired Ethernet connection. Then that Express can "extend" to another Express using wireless.

C6 - Windows 7, Ovi Suite and connection via Bluet...

Hello
I have a problem with connection my Nokia C6 with computer (system Windows 7) via Bluetooth.
Ovi found the device, move on to the next step. Displays the message "Your computer may be required to install the Bluetooth modem", then a long, long time nothing. And then an error "Can not connect to the device. " What could be wrong?

I have the same trouble with my E71 and Lenovo TP w510 (Windows-7-64).
I've made clean install recently (disc crash) and I have now everything up2date - system, drivers, BT (Microsoft stack) and latest OVI suite. But I can't connect with BT (same messages and then error). However, I can browse my phone directly (windows BT connect) easilly.
Before disc crash I've had Office 2007 and OVi Suite 2.xx together with PC Suite (ver. 7) and everything worked ok. Now with clean install of all latest system, drivers and sw it doesnt work. This is what make me furious with Nokia and their SW - it is worthless. By my opinion the step from PC Suite to OVI Suite is is like step from ugly good horse to fancy dressed **bleep**. You have no control of syncing things not even a proper logs etc. This is simple stupid. And OVI messed thing many times. For example - lately it write me some events (serise) all over many days in my caledar. And gues what - it looks it is immpossible to clean whole calendar with one simple move on the phone.
I am seriously looking for a new phone and it looks like this is my last Nokia.

Can't connect via Finder but works with everything else

The Time Capsule is working fine with Time Machine and Airport. However when I try to connect via Finder, it just says 'Connecting...' and never changes. When I hit 'Connect As...', nothing happens. I have rebooted the TC and deleted all passwords from the keychain but that didnt help. Latest OSX updates and firmware update installed.

I powered down and was relieved to hear the fan jolt and the drive spin so that looks good.
Wireless is currently the only method I've been using to connect to the TC with my macbook because as of right now I dont have a USB->ethernet adapter but I will pick one up later today to see if that changes anything. The cable modem is connected via ethernet though and that seems to be working fine.
The LED is solid green when the modem is plugged in and flashing orange when it is not.
Here is the log after a power cycle, at first I did not have the cable modem plugged in and attempted to access via Finder with no luck. Then shortly after, I plugged in the cable modem and tried Finder again. Its interesting that attempting to access the drive via Finder does not create any activity in the log.
I will try to cool down overnight and hope I can get at the data. At this point, my main goal is to retrieve the files. And then get a new local backup solution asap. I am currently doing a full online backup to Crashplan but with 500GBs, its going to be weeks before it finishes uploading.
Jul 13 05:47:42
Severity:5
Initialized (firmware 7.5.2).
Jul 13 05:47:54
Severity:5
Deauthenticating with station ff:ff:ff:ff:ff:ff (reserved 3).
Jul 13 05:47:54
Severity:5
Deauthenticating with station ff:ff:ff:ff:ff:ff (reserved 2).
Jul 13 05:47:54
Severity:5
Rotated CCMP group key.
Jul 13 05:48:12
Severity:5
Associated with station 14:10:9f:d5:8e:bb
Jul 13 05:48:12
Severity:5
Installed unicast CCMP key for supplicant 14:10:9f:d5:8e:bb
Jul 13 05:48:13
Severity:5
Binding added for udp, 0.0.0.0:32769 to 10.0.1.3:5353 with lifetime 7200
Jul 13 05:48:23
Severity:5
Connection accepted from [fe80::1610:9fff:fed5:8ebb%bridge0]:50904.
Jul 13 05:48:26
Severity:5
Connection accepted from [fe80::1610:9fff:fed5:8ebb%bridge0]:50905.
Jul 13 05:48:42
Severity:5
Connection accepted from [fe80::1610:9fff:fed5:8ebb%bridge0]:50906.
Jul 13 05:48:44
Severity:5
Connection accepted from [fe80::1610:9fff:fed5:8ebb%bridge0]:50907.
Jul 13 05:48:44
Severity:5
Connection accepted from [fe80::1610:9fff:fed5:8ebb%bridge0]:50908.
Jul 13 05:49:36
Severity:5
(WAN) link state is Up.
Jul 13 05:49:36
Severity:5
Internet configuration leased [IPv4] -- host <69.204.228.249/255.255.254.0> gateway <69.204.228.1> dns <209.18.47.61 209.18.47.62> wins <> lease <43200> domain <nyc.rr.com>
Jul 13 05:49:36
Severity:5
Binding added for udp, 69.204.228.249:32769 to 10.0.1.3:5353 with lifetime 7200
Jul 13 05:49:38
Severity:5
Internet configuration leased [IPv6] -- host <2604:2000:ffc0:27:5c41:d64:1455:8715> dns <> delegated <>
Jul 13 05:49:38
Severity:5
Internet configuration leased [IPv6] -- host <> dns <> delegated <2604:2000:1009:c07c::/64>
Jul 13 05:49:38
Severity:5
IPv6 route advertised [flags=ADDRESS DNS=NONE]
Jul 13 05:49:39
Severity:5
Clock synchronized to network time server time.apple.com (adjusted +6 seconds).
Jul 13 05:49:42
Severity:5
Binding added for udp, 69.204.228.249:32769 to 10.0.1.3:5353 with lifetime 7200
Jul 13 05:49:51
Severity:5
Internet configuration leased [IPv4] -- host <69.204.228.249/255.255.254.0> gateway <69.204.228.1> dns <209.18.47.61 209.18.47.62> wins <> lease <43186> domain <nyc.rr.com>
Jul 13 05:49:51
Severity:5
Binding added for udp, 69.204.228.249:32769 to 10.0.1.3:5353 with lifetime 7200

Not able to connect to PC Suite with Nokia-5130 Ex...

Hi,
Can any one support me how to connect to PC Suite from Lap Top to Nokia-5130 Express Music model. I treid with User guide of the same model but couldn't help me out..
I am getting message "PC suite is connected in non-compatiable mode,please change it from Phone UI" even though i selected PC suite option in the settings-->Connectivity-->USB Data cable-->PC Suite
Thanks in advance..
Warm Regards,
Ramana.Y

Hi, Thanks alot for the reply..
     But even i tried that also..
     Please find the details steps:
     1.connect USB cable to Lap top by connecting cable with Nokia-5130 Express Music in other end.
     2.Now in the phone it shows some message like 'transfering data' after that i used to get message 'Host is not found'
    3.Now change the settings to settings-->connectivity-->USB Data cable-->PC Suite then, pc suite is not enabled in lap top.
   4. Change settings to settings-->connectivity-->USB Data cable-->Datastorage, then pc suite is enabled. but it shows message 'pc suite is connected in non-compatiable mode,please change it from phone UI'.
i am not getting where exactly the problem located..
And one point is, i installed pc suite which i got it with N-72 model. Is there any problem in compatiability of pc suite.. previously i used to use Nokia-N72. that time i did't get any problem.
i have one doubt, when i bought nokia-5130 express music, i didn't get CD seperately.Usually CD will be given or not?

Nokia PC Suite VS Nokia PC Connectivity

This may be a noob question, so please forgive my ignorance.
Can someone please give me a concise rundown of what Nokia PC Suite & Nokia PC Connectivity Solution are?
I've been searching Google & all over & can't really get a distinction between the two. I'm largely unfamiliar with these applications, but because of some of the work I'm doing for my job I need to find this information out.
Thank you all.
*Hopes & prays to not get flamed or trolled upon* (^_^)
Solved!
Go to Solution.

There used to be separate versions of PC Suite for each and every phone model
At some point it evolved into a single, "unified" PC Suite version supporting all phone models (relatively current at the time and afterwards, ignoring support for many older models).
A few yeara later Nokia branched off parts (the core PC connectivity bits/components) from PC Suite to create a new application (user interface) called Ovi Suite (PC Suite was being kept updated alongside) based on Qt.
A couple of years later (last fall) Ovi Suite was renamed to Nokia Suite (as Nokia is gradually moving away from the "Ovi" brand it introduced in 2007).
Latest Ovi/Nokia Suite here:
http://www.comms.ovi.com/m/p/ovi/suite/English
Latest PC Suite here:
http://europe.nokia.com/support/product-support/nokia-pc-suite
If things haven't changed lately, you can even install both on the same PC, if you wish.
For N9 (MeeGo) Nokia also has the Nokia Link:
http://europe.nokia.com/support/product-support/nokia-link
And for Mac users Nokia has had stuff, too:
http://europe.nokia.com/support/product-support/mac-support
(Note: For Windows application developers Nokia has also released two different SDKs, Software Development Kits. For the phones prior to the "unified" PC Suite times, there is/was something called the "Nokia PC Connectivity SDK", and for the newer PC Suite supported phones there's the "PC Suite API", also known as "Nokia PC Suite Connectivity API".)

Mini-DVI cable and connecting via s-video to scart cable

Hey I bought a mini-dvi adapter a while back and have just purchased a s-video to scart cable to connect it to my television but there is no picture showing just a blue screen. Any help would be gratefully received.
Cheers
Jon

which adapter did you buy exactly?
there is 3 for this series of macbook - DVI, VGA, & analog RCA - S-Video.
if you bought the analog RCA - S-video, I belive the one for the UK has a different part #. you may have bought one for the States that may not support your standard.
http://store.apple.com/uk/product/M9319G/A?fnode=MTY1NDA3Ng&mco=MzQ3MDM2OQ
Message was edited by: kmac1036

Does anyone have an applet that runs on Windows CE and connects via jdbc to lite DB

I am trying to get an applet to connect to the Oracle lite DB
I use
     if (conn == null)
     // Load the JDBC driver
Class.forName("oracle.lite.poljdbc.POLJDBCDriver");
     conn = DriverManager.getConnection ("jdbc:polite:polite", "SYSTEM", "MANAGER");
     output.appendText ("Connected\n");
but CE just echos oracle.lite.poljdbc.POLJDBCDriver and does not connect.
Does anyone have any working samples? I am using Jeode JVM on the CE device

We have the same problem with that platform, but we get a
java.security.AccessControlException: access denied (java.lang.RuntimePermission loadLibrary.oljdbc40)
exception.
Thank you in advance.

After restart system, cannot start sap (and connect via GUI)

We have installed Solution Manager 7.1 on linux64.
After the accident, and reboot the system , stops producing startsap. On the advice of specialists took over running the "startsap <virtualhost>"
At the command prompt , startsap_DVEBMGS00.log startsap.trc and indicated that the launch was successful .
However, neither in the list of processes to be seen dispatcher, or SAP GUI can not connect to the system.
In addition, there is an assumption that just does not start JAVA Instance.
In this regard, there are a number of questions for the esteemed colleagues :
1. on how the logs directory from which you can learn this starts the ABAP and JAVA stacks ?
2 . As can be verified directly from the server ( what commands ) kaktivnost / no system activity ?
3 . Which log files do I need to provide here , you so that you could possibly help me?

Hi Michael,
You need to check the below things
1. Run R3trans -d to check whether sap can connect to DB or not.(it will create the trans.log file)
   If return code is 0012 , then
      There is some problem with Database
Else return code 0000
     There is some problem with SAP.
2. Now go to the directory /usr/sap/<SID>/DVEBMGS<XX>/work
    and check the log files
    1. dev_w0
    2. dev_disp
    3. dev_ms
    4. stderr<x> logs which alos content important system
Above logs are for ABAP system analysis.
For Java
3. std_server<x>.out
4. dev_server<x>
5. dev_dispatcher
Also check the default tarce and application log as well for java
With Regards
Ashutosh Chaturvedi

Can I have wired and wireless simultaneously - and connect via another Mac?

Here's my problem: My eMac (Feb 2005 running Leopard 10.5.8) is great except that it drops the ethernet cable internet every 15 minutes or so. "Sleep and wake" and I'm back on the internet for another 10-20 minutes, but this is not a long-term solution.
OK so I say that I will get a D-Link wireless USB adapter for the eMac (it has bluetooth, but not WiFi). Fine, except then the D-Link DIR-635 router that sends the WiFi signal is too far away and too weak. But I have another computer to which I can plug-in the Ethernet CABLE. Can I then connect the eMac via a wireless (airport) sharing? NOTE: At this time the ISP Modem goes to a DIR-635 router (a wired and wireless router) and the cable goes up 2 flights of stairs to the eMac. I'd plan to then plug-in the PBG4-12" to the cable instead of the eMac; and then connect the eMac via wireless sharing if that is possible. (The PBG4 does NOT drop the signal via wired ethernet - it is a problem with the eMac not the cable or router).
BUT then how to print? My MP640 printer is set-up for wired printing only right now. And for a number of reasons, I really want to keep it on wired (not wireless)-- I use this with another computer etc. etc. and wired gives me more selections for printing...
Any comments on this possibility and then I'll reply with comments and/or ideas-- THANKS!
Best regards,
Steve Schulte
Thursday 3 February 2011

If you use two routers then you should have the main one (connected to modem) as the official router. The second one should be configured to extend the existing network (you will need to consult its manual to find out how that's done.) If you try using two routers independently, then they will tend to interfere with each other because both are trying to deliver IP numbers on the network. So if the printer ends up on the secondary router then a machine connected to the main router may not be able to connect to the printer.

Nokia N93 and copying music from a Mac with Nokia ...

I recently just got a Nokia N93. I am able to use iSync with it thanks to a plug-in.
I have had some success using syncTunes v1.6 to copy music files over to the memory card when the phone is connected with the USB cable. But the playlists do not work.
I did download and install the Nokia Music Manager for the N70 (I believe).
Will the Music Manager work with an N93? I am actually seeing the music on the phone but the app says iTunes is not available.
I am using Mac Os 10.4.8, iTunes 7.01. I have installed v1.02 of the Nokia Music Manager.
Will there be a release for the N93 or should the current version work?

I have been happily using Sync Tunes the last few months.
Recently, I started playing around with making smart playlists in iTunes. What I wanted to do was create a random play list of tracks to copy on a daily basis to my phone.
I ran into all kind of fun with audio file formats. It turns out the many of my audio files are encoded as M4A and MP4. These will not play on the Nokia N93.
Fortunately, I found a web-site (http://smartplaylists.com/) explaining how to filter out these kind of audio tracks in the smart play list. The built in help in iTunes is very poor in this regard.
The following link is to explanation on how to select file types in smart play lists.
http://smartplaylists.com/comments.php?id=729_0_1_0_C
Now I can create a playlist that is 950 M of audio tracks and I then use sync tunes to copy it across.

How do I connect via bluetooth my ipad with my Blackberry Torch

How do I connect my ipad to my blackberry torch via bluetooth.

am kinda regretting why I bought an iPad if it cannot interact with other devices, like the blackberry phone I have. I want to share pictures between the two devices but I cannot! Why is this so??????
iOS does not support file transfer via Bluetooth. If you want to transfer photos, you'll need to sync through your computer or use a cloud-based service.
Please help me otherwise this will be the last iPad I'll ever own.
If you think some other device will suit you better, by all means sell your iPad and buy that other device.
BTW, posting in a thread that's over two and half years old is not usually the best way to get help from us, who are all just your fellow users, just FYI.
Regards.

Cann't connect to nokia map server with nokia suit...

this is very seriously problem,because i have problem to connect to map server,a view minute download, it seem have speed 2,4 mbps, but it stop and say, "you work in ofline mode". Any body can help me for solve this problem???

Need to know what device you are using here as in a last resort you could always download map data as compressed .zip, decompress it and install manually. It sounds as if you have a very poor internet connection and it is timing out.
Happy to have helped forum in a small way with a Support Ratio = 37.0

T61 [7663-V5M] XP ENG SP3 AND CONNECTION VIA NOKIA PC SUITE WITH NOKIA 6230i

Similar Messages

Maybe you are looking for