T61 and Windows 8 compatibility

Has anyone loaded Windows 8 on a ThinkPad T61? Is so, were there any incompatibilities? I currently run Vista Business 32-bit on my T61 but am considering moving on to Windows 8.
Solved!
Go to Solution.

I did a clean install of Win 8 Pro on my T61 about a month ago and am very happy with the results.
I have the following software and drivers running with no issues whatsoever:
Lenovo Auto Scroll Utility  v1.11
Lenovo Patch Utility   v1.3.1.1
Lenovo Patch Utility 64 bit  v1.3.1.1
Lenovo Power Management Driver  v1.66.00.17
Lenovo Settings Dependency Package v1.0.5.6
Lenovo System Interface Driver  v1.05
On Screen Display   v6.61.00
ThinkPad FullScreen Magnifier  v2.40
ThinkPad Modem    v7.62
ThinkPad Ultranav Driver  v15.0.18.0
ThinkVantage Power Manager  v6.36 (Installed using Win 7 compatibility)
ThinkVantage Active Protection System v1.77.0.9
ThinkVantage Fingerprint Software v5.9.8.7264 
Lenovo System Update   v5.01.005
For the Nvidia video, Intel Wi-Fi and Bluetooth drivers I am using those supplied by Windows update.
Every function available in my T61 is fully operational!
E420, i5, 8GB, 500GB/7200, 32GB mSATA, Win 8.1 Pro x64
T61, 4GB, 500GB Hybrid, Win 8.1 Pro x64

Similar Messages

  • Moderator: A FAQ for Windows Compatibility forum?

    Would it be possible to do a FAQ section in the Windows Compatibility forum <http://discussions.apple.com/forum.jspa?forumID=687>? Many of the same topics are being asked repeatedly and I feel a FAQ could address most of the similar topics.
    I suggest the following as topics for the FAQs:
    1. Microsoft Office questions. These are not relevant to Mac and Windows compatibility and are more appropriately posted in Microsoft's discussion forums.
    2. Boot Camp questions should be directed to the Boot Camp forum and Parallels questions should be directed to <http://fourms.parallels.com>.
    3. The need for antivirus software for Windows when it is running on a Mac.
    4. A list of links detailing how to print from a Mac to a Windows-connected printer and vice versa.
    bill
    1 GHz Powerbook G4   Mac OS X (10.4.8)  

    Thanks for your replies Ardian and Hardy! I'm glad to see at least the idea is supported by a few others. Maybe it will catch on.
    What I find interesting is that the Windows Compatibility forum has become the dumping ground for all the "Windows" questions that don't seem to fit in the forums listed before it. You'll notice on the Forum Home page that it's at the end of the Windows Compatible Technology list. I'm sure folks are ruling out the more specific technologies such as iPod, iTunes, QuickTime, etc., and posting there when they don't know where else to post.
    Windows Compatible Technology
    AirPort & AirPort Express for Windows
    Bonjour for Windows
    Boot Camp Public Beta
    iPod
    iTunes for Windows
    QuickTime for Windows
    Windows Compatibility
    Even a general FAQ link below or to the right of the the section title would be a helpful guide for folks.
    I'm frustrated that more than 50% of my questions seem to be telling first time posters why their questions aren't approrpriate for the forum and which forums they should be using.
    bill

  • Iphone and windows 8 compatibility?

    When is apple going to fix the iphone and windows 8 compatibility? All I get is the "waiting for changes to be applied" message. I can't sync my phone.

    I have  no issues with Win 8 working fine with the latest (win 8 compatible )
    iTunes

  • Itunes and windows 8 compatability Hi just bought a new toshiba laptop installed itunes it worked at first now wont play music or movies.  ran troubleshooter said its a compatabilty problem suggested turning off itunes compatability or selecting windows 7

    itunes and windows 8 compatability
    Hi
    just bought a new toshiba laptop installed itunes it worked at first now wont play music or movies.
    ran troubleshooter said its a compatabilty problem suggested turning off itunes compatability or selecting windows service pack 3 tried both no help
    please assist
    adam

    itunes and windows 8 compatability
    Hi
    just bought a new toshiba laptop installed itunes it worked at first now wont play music or movies.
    ran troubleshooter said its a compatabilty problem suggested turning off itunes compatability or selecting windows service pack 3 tried both no help
    please assist
    adam

  • CS4 and Windows 8 compatibility

    Has anyone successfully installed CS4 on Windows 8? I am currently using Windows XP and received a pop up saying Microsoft are no longer releasing updates for XP after August and I am entitled to a free download of Windows 8. I am trying to decide whether to do this but risk losing my use of CS4 which I really don't want to do. Any advice much appreciated as not sure whether to just continue with XP. Thanks in advance.

    If you search Google using the terms "CS4 and Windows 8 compatibility" you can probably find various results from both Adobe and Microsoft that should give you some idea of how much of a gamble you might face in changing your OS.
    In my own experience, a change in OS has yet to be a positive experience... while most people loved XP in its day, I suffered years of poor performance with it as an upgrade from the moment it was installed and regretted doing it.  Maybe you've had better experience and aren't as shy of it as I am.

  • Compatibility issue between your power management system and Windows 8.1

    I have purchased a new Lenovo Ideapad S410 and have this problem.
           Compatibility issue between your power management system and Windows
           It also gives a message "Your PC ran into a problem and needs to restart. We're just collecting some error info, and then we'll restart for you. (100% complete)
           If you'd like to know more, you can search online later for this error:
    VIDEO DXGKRNL FATAL ERROR
    Please help! My laptop is only 5 days old.

    What model do you have? Can you post your MTM or model name?
    Sometimes these messages are a false alarm.

  • Cannot log into T61 from remote computer with wired network and Windows Explorer.

    Hi,
    I am using a T61 7662-cto with Windows 7 Professional
    When the T61 is connected on the home network with the wired network, I am not able to log into it remotely from another computer. On my second computer, I see the T61 with Windows Explorer but instead of getting the login window, it appears a Network Error with the message:
    “Check the spelling of the name. Otherwise, there might be a problem with your network.” With a error code 0x80070035, “The network path was not found.” I tried the “Diagnose” button but it doesn’t give solution.
    When the T61 is wireless connected, there is no problem. I can access it from my second computer.
    I never have problem to connect to the second computer from the T61 with any connection type . I just updated the Intel Wireless LAN (bg, abg, abgn) for Windows 7 – ThinkPad, with the drivers required but it changes nothing.
    http://www-307.ibm.com/pc/support/site.wss/document.do?sitestyle=lenovo&lndocid=MIGR-73611
    Do you have a hint for this issue why the wired network gives problem?
    Thanks

    Open this post, go to the flagged message. On its right is a button
    to turn off the flag.
    I went to the site. The only problem I had was one has to sign in
    to see anything. Even the main page had a very large ''Please
    Sign In'' covering the window.
    Many site issues can be caused by corrupt cookies or cache.
    * Clear the Cache and
    * Remove Cookies<br> '''''Warning ! ! '' This will log you out of sites you're logged in to.'''
    Type '''about:preferences'''<Enter> in the address bar.
    * '''Cookies;''' Select '''Privacy.''' Under '''History,''' select Firefox will '''Use Custom Settings.''' Press the button on the right side called '''Show Cookies.''' Use the search bar to look for the site. Note; There may be more than one entry. Remove '''All''' of them.
    * '''Cache;''' Select '''Advanced > Network.''' Across from '''Cached Web Content,''' Press '''Clear Now.'''
    If there is still a problem,
    '''[https://support.mozilla.org/en-US/kb/troubleshoot-firefox-issues-using-safe-mode Start Firefox in Safe Mode]''' {web link}
    While you are in safe mode;
    Type '''about:preferences#advanced'''<Enter> in the address bar.
    Under '''Advanced,''' Select '''General.'''
    Look for and turn off '''Use Hardware Acceleration'''.
    Poke around safe web sites. Are there any problems?
    Then restart.

  • Windows compatibility; Delete key, view, Office for Mac and  Hassels

    Dear Friends
    I liked the style of the Mac powerbook, and after years of happy use of a Samsung notebook, I decided to take the plunge and buy a Mac. I amlo liked the idea of contributing to diversiy and not putting all my bucks in Gates's basket! People assured me there would be no compatibility problems bwteeen Office for PC and Office for Mac. So I moved from PC to Mac, but have had lots of problems. I have a powerbook 12". My main issues are that:
    1. Word and Powerpoint for Mac do not always convert properly when I take my files to work where I have to use PC. I find editing in powerpoint for Mac less easy than PPT for windows. Before an important presentation at an international conference recenly, the file I worked on on my Mac came out all funny when I loaded it onto the windows laptop that was already set up. I lost a good five minutes ******* around beore an international audience. Someitmes formatting in Word for Mac jumps and highlights and bold and bullet points go all srtrange or are lost when I take the file to work.
    2. The keyboard of the Mac is frustrating. I usually delete rightward; to do this on a Mac I have to hold down Fn and then delete, i.e. two finger operation. I always screw up since I am so used to the delete key on my PC and my brain gets in a twist. Is there a way I can change this?
    3. The power book is quite heavy (a simple moan as I travle a lot).
    4. Word, PPT and internet pages do not cover the whole screen, just the left half to three quarters, with a strip of unused screen on the right. I have been unable to make word for Mac ect cover the whole screen, so I always have to adjust the view size and then half the text is cut off. I would like to see the whole screen used. This is frustrating as the Mac has a kind of grainy screen.
    Any suggestions?
    Chris

    1. For problems related to Microsoft Office you should post your questions to Microsoft's own Mac discussions:
    http://www.microsoft.com/mac/community/community.aspx?pid=newsgroups
    2. If you want to "forward-delete" on a Mac without hitting the function key, then you'll have to purchase a full size Apple USB keyboard.
    3. Sorry. Can't help with that one. Maybe you should have bough a ligther 15" Powerbook.
    4. Again, sorry, but that's not a bug, it's a learning curve. Longtime Windows users seem to be more often than not used to working with applications and windows that cover the whole screen. Mac users generally don't. Just drag the windows over to the right or click the green maximize button at the top left of each window.

  • ODI 10.1.3.4 and Windows 7 compatability

    Is there an issue with ODI 10.1.3.4 and Windows 7?
    Edited by: dalew7777 on Sep 13, 2010 10:39 AM

    OK, figured out the compatability issue. Just had to add Windows 6.1 to the oraparam.ini file and I was able to install the application on a Windows 7 box.
    Now I am getting an error when trying to create the connection. It says that the login already exists. Well of course it exists...I am just trying to create this connection string on this other pc. The connection string I am trying to create on the machine was already created on another machine and I am just trying to use this same one on the Windows 7 box. This connection tested OK I just need to save it on the new machine. Anyone know what I am doing wrong here?

  • Captivate 3 and Windows 7 Compatability

    I have Captivate 3 and am consideing buying a new PC and want to know if I'll have compatability issues between 3 and Windows 7.   If Captivate 3 and Windows 7 can't play nicely together, will Captivate 4 work?  Thanks

    Hi there
    I wouldn't expect Captivate 3 to work with Windows 7 with no issues. However, even if you were to upgrade to Captivate 4 you would still stand the chance of seeing issues. Particularly if Windows 7 is the 64 bit version. If the computer RAM is advertised as more than 3 gig (4 gig RAM systems are very common) you can pretty much count on the fact that Windows 7 will be 64 bit.
    Captivate may work or it may have issues. It works just dandy for some folks using Windows 7 64 bit. For others, it's nothing but trouble. The bottom line is that Your Mileage May Vary.
    Cheers... Rick
    Helpful and Handy Links
    Captivate Wish Form/Bug Reporting Form
    Adobe Certified Captivate Training
    SorcerStone Blog
    Captivate eBooks

  • Is there any way of improving compatibility between ipad 4 and windows xp                                                     p

    is there any way of improving compatibility beween ipad and windows xp

    Hi Smokey0422,
    Although iTunes works with Windows XP, iCloud is not supported - so that does limit the functionality somewhat.
    See the resources for your iPad at the following site:
    http://www.apple.com/support/ipad/
    See the setup instructions below:
    http://www.apple.com/icloud/setup/pc.html
    Cheers,
    Judy

  • Project Server 2010 compatibility with IE11 and Windows 8.1

    Hi All!
    Maybe a silly question since compatibility is always asked about older versions, but here is my question:
    Is Project Server 2010 compatible with IE11 and Windows 8.1?
    I personnaly tested with IE11 and it seems to be ok. All views and pages can be opened with IE11.
    But what about windows 8.1? 
    Has Microsoft done any communication about this?
    Thanks in advance for your helps.
    Guillaume.
    Guillaume Rouyre - MBA, MCP, MCTS

    I am seeing a minor issue with the timesheet grid after users are upgraded from IE8 to IE11.
    We are using Project Server 2010 with SP1 and Oct 2013 CU.
    When some users (using IE11) switches between filters or views in the Timesheet page, the grid shrinks making to content un readable.  The only way to get it back is to refresh the page. After a refresh, the grid returns to normal size, but the pane
    divider is too far to the left and always must be dragged to the right in order to see the task names in the left grid. 

  • Compatibility forms 6i and Windows Server 2008

    Hi,
    We want to change our Server from 2003 to Windows Server 2008 64bits.
    My question is : is there a compatibility between Oracle forms 6i (our application) and Windows Server 2008 ?
    Will the migration be successfull, or will we have some bugs?
    Thks for your help.
    O.

    YES. It worked perfectly for me, you'll have to use oracle 8/8i lite though.

  • Any known issues with Flash player 9 and windows 2003 compatibility?

    Hi guys..
    Is there any known compatibility problem with running flash
    applications
    on Windows 2003 Server?
    My application runs just so well with Windows XP
    yet it throws a 2015 bitmap error
    when it is being run on the windows 2003 server.
    (Not quite often but often enough. the only difference is the
    operating
    system)
    Is there any known issue about this?
    Or could there be any compatibility problem with flash player
    and
    windows 2003?
    Any hints would be deeply appreciated...
    Thank you...

    Hyperion 32-bit Web Apps are fully compatible with Essbase 64-bit. Same with 32-bit Essbase client.

  • Upgrade questions on T61 and what version of Windows 7?

    I have bought a T61 and expect to receive this week.  It has 2gb ram installed and a 100gb HD.  I believe Lenovo supported up to 4gb?  Has anyone put in 8gb?  Also can this model run 64bit Windows 7?  Finally thinking up the road putting in larger hard drive.  As long as I pick a 9.5mm size, any restrictions as to what types of drives it will accept?
    Solved!
    Go to Solution.

    starbux48 wrote:
    Might look at bigger hard drive.  Only has 100gb but would like to put either a 500gb or 1tb SATA 2.5"/9.5mm drive in it.  
    I second the recommendation for SSD. These days 128GB and 256GB units are quite reasonable. You don't need the fastest models on the market either because the T61 only runs at SATA-I (or SATA-II with so-called "Middleton" BIOS.)
     If you need more disk capacity than that, consider getting an Ultrabay adapter to replace the DVD drive and put a large HDD in that. You can buy these adapters inexpensively on eBay and Amazon. Make sure the one you get is compatible with T61 series.
    You can also get an external enclosure to hold the DVD drive from the T61. This then connects via USB. Or just buy an external, USB-connected DVD drive. They're quite cheap these days. 
    Cheers... Dorian Hausman
    X1C2, TPT2, T430s, SL500, X61s, T60p, A21p, 770, 760ED... 5160, 5150... S360/30

Maybe you are looking for

  • Ability to sort by image similarity.

    Ability to sort by actual image similarity.  This is the only way I can think of to identify duplicates in the catalog.  I know I have perhaps 5,000 dupplicate RAW images in my catalog and I can think of no other way to find them (so I can delete the

  • CV01N/CV02N/CV03N DMS to open Word .dot document. The macro is desabled.

    Hello everyone We have created a ".DOT" Word document containing (Visual Basic) commands to ask the user to enter 2 fields. When that is done, the user can press on buttons to print or cancel. We stored that document in the DMS (CV01N) The document i

  • FDM ERPI mapping problem

    Hi, I am using FDM ERPI,in this I got strucked in mapping situation, my question, my source system is having two different segments, and target system is having one dimension with two functionalities(two segments) of source system segments. ex: sourc

  • Clear Selection in a Gallery

    I am using a rectangle to highlight selection of a row within a gallery by setting its visible property. How do I use a button ouside the gallery to clear any selection within the gallery? Thanks, Jatin Jatin

  • PC Suite not syncing with Vista Contacts

    OK, somebody PLEASE help! Here's the vital info: Windows Vista Home Premuim (no Servict Pack listed) PC Suite Version 7 Nokia XpressMusic 5310 Connected via USB Set to sync to Windows Calendar and Contacts However, when I sync, I DON'T see ALL the co