T61 - BSoD After BIOS Update Attempt

Hello everybody,
I was attempting to update my BIOS since I had problem with my hard-drive(enclosure) being recognized by my laptop and I believed that would solve the issue. Now, my biggest problem I have is a blue screen turning up after the failed attempt of updating the BIOS.
How do I go about this to fixing it? troubleshoot? recommendations?
I would greatly appreciate the help.
Solved!
Go to Solution.

Bios rarely (virtually never) fixes problems, unless it is specifically released to fix a problem that you are confirmed as having. No one should attempt to update a bios on a system with a problem, you're likely to destroy the system board, however in your case this may be very simple. If your operating system was installed with the sata controller in compatibility mode, then the bios update will set it to default SATA mode and windows will "blue screen" upon boot. Enter bios and change SATA setting to compatibility mode and report.
If that doesn't do the trick, post more info about your system, everything on the bottom label except the serial number. and your windows version.
ThinkPad W-510 i7-820QM(1.73-3.06GHz) Quad Core... ThinkPad T500, T9900, 8gb SSD...FrankNpad T-60p/61p (X9000 2.8ghz) 8gb SSD ips FlexView...ThinkPad T-61p (T9300 2.5ghz) 8gb ram...Thinkpad X-61 Tablet 4gb ram...ThinkPad A-31 (1.9ghz P4 1.5gb ram)

Similar Messages

  • Satellite Pro L300: BSOD after BIOS update

    Hi
    after update the Bios of Satellite Pro L300, the windows not start!
    Its show the blue dead screen!
    What can i do?

    Hi
    Are you able to access the BIOS settings?
    Im not quite sure why this BSOD appears but possibly the SATA mode settings have been changed after BIOS update
    Usually the SATA mode should be set to AHCI if the SATA drivers are installed.
    But if the SATA drivers are not included the SATA mode should be set to compatible.
    Please check this!
    Furthermore you could set the BIOS to the default settings and could try to boot the machine again.

  • Bsod after bios update 1.4 - 1.5 + Windows automatic repair loops

    After i updated my bios with liveupdate5 my computer started acting up with endless automatic repairs for w8.1 and random bsods for w7. Changing bios settings and restoring defaults does not solve the issue :-/
    Is it possible to revert back to the 1.4 somehow?

    Quote from: RemusM on 07-March-14, 21:50:06
    v1.5 was released 3 months ago.
    http://www.msi.com/product/mb/H87MG43.html#/?div=BIOS
    Did you clear the CMOS (and reload the default settings) after the BIOS update?
    hm true, weird how they just now was displayed in the live update. No, I havent done any type of manual cmos clearing, but it would seem that the live update takes care of that as far as the instructions goes.
    Patching back to 1.4 without any light in the tunnel. The computer still does no longer boot futher than the windowslogo before bsod. Reinstalling windows does not help :-/

  • After bios update side nomberpad is not workinh keys from 0-9

    after bios update side nomberpad is not workinh keys from 0-9

    Hello jay04,
    Welcome to the HP Forums!
    I understand the number keys do not work on your keyboard. I will do my best to assist you. First, I require the following information:
    1. The computer's model number. If you require assistance locating this information, please reference this website: Guide to finding your product number
    2. The computer's operating system. If you require assistance locating this information, please reference this website to determine your Windows operating system.
    3. Does this occur on certain programs, or all programs?
    4. Have you installed any new software or drivers on this computer, before the issue appeared?
    Additionally, if the issue just began occurring, I would perform a system restore. I want you to bring the computer back to the earliest restore point possible, in an attempt to dodge whatever caused the issue. Here is a document on how to perform a System Restore: System Restore
    Thanks!
    Mario
    I worked on behalf of HP.

  • I can't activate windows 8.1 pre-instal​led on my Toshiba E45-B4200 after BIOS Update

    I bought Toshiba laptop Model E45-B4200, at first time I could activate windows 8.1 like a charm.
    Few months later Windows 8.1 has crashed, so I did clean install of pre-installed windows, no problem so far. Toshiba Application installer app has downloaded BIOS update, so I ran it.
    I tried to activate windows after BIOS update, but it didn`t work. No error message, but Change PC settings window just got minimized every time that I tried to click on Activate Windows option. I thought that I did some mistake, so I repeated windows reinstallation, and same problem occurred again.
    Now I can`t update Windows, Office 2013, and so on. 
    I`ve tried SLUI 4 command to force activation by phone, but it didn`t work as well.
    I read on MS blogs that windows 8.1 stores product key on MSDM table, windows should be activated normally. Now I got no options now, can you help me?

    It shouldn't need to be activated it. Everything should be automatic. Because it's asking you, that's already indicative of a problem. You might want to call customer support.
    - Peter

  • Problem in booting after bios update

    Originally, it was windows home basic was installed in my laptop. But recently I had installed Windows professional. After installation I have downloaded all drivers which are compatible for my laptop model. After BIOS update installation my pc is not booting up at all. Only power button, WiFi and capslock is lighting. Capslock is continuosly blicking. Even FAN speed gets lowered. I have tried hard reset as well as windows+B comand during startup still condition is same. Please reply me....

    see help 8....
    I am a Volunteer to help others on here-not a HP employee.
    Replies aren't online 24/7 because of Time Zone differences.
    Remember in this Day and Age of Computing the Internet is Knowledge at your fingertips if you choose understand it. -2015-

  • After BIOS update Satellite L350-172 doesn't start anymore

    Satellite L350-172 Bios-Update from bios-20090203164614 to bios-201002250
    I just updatet the BIOS of my notebook from 1.60 to 2,20. Now the Notebook doesn't start any longer.
    "It was stopped for reason not to damage the Computer" - blue schreen.
    How can I downgrade the bios again? Or - what have I to change in the bios-settings?

    Hi schuwe,
    Im a little bit confused about your posting. How do you tell your BIOS not to restart?
    Anyway, after BIOS update you should load the default settings in BIOS.
    Did you choose the right BIOS especially for your model?

  • Hi . plz help me. after bios update. i could work till I shutdown

    After bios update I could work till I shutdown my laptop g510 . Now when I press power button. White light near camera shows but again it goes off. Plzzzzz help me
    I also pressed one recovery. Then pressed f2 and f9 f12 nothing working.

    take it to point of purchase with proof of purchase if you can't find a Nokia care point near you
    If  i have helped at all a click on the white star below would be nice thanks.
    Now using the Lumia 1520

  • After BIOS update DVD driver do not read DVDs anymore - Sat A80

    Hi,
    I have a Satellite A80-131 and after bios update (last version 2.5) by windows procedure update, my DVD drive do not read DVD medias anymore. It is possible to read CD medias, but not DVD one.
    Can I reinstall the old bios? Can I reinstall the firmware?
    Thanks
    Ronai Lisboa

    Hi Ronai
    Like Jimi has said in the posting above. It's very unusual that after BIOS updating the DVD drive hasn't read the DVDs.
    Furthermore it's not advisable to use any 3rd party applications to DOWNGRADE the BIOS. Usually only the ASP can downgrade the BIOS. Such procedures are very serious and the wrong procedure can damage the motherboard.
    However, it's nice that you have solved the problem and that the drive works properly.
    Thanks for the feedback.

  • Satellite A100-590 PSAA9E freezes on Toshiba welcome screen after BIOS update

    Hi.
    Yesterday I did a BIOS update on my Satellite A100-590 PSAA9E-03Z00QGR with the appropriate flash:
    http://eu.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/download_driver_details.jsp?service=EU&selCategory =2&selFamily=2&selSeries=153&selProduct=624&langua ge=17&selOS=10&selType=all&yearupload=&monthupload =&dayupload=&useDate=null&mode=userMachines&search =&action=search&macId=&country=all&selectedLanguag e=17&type=all&page=1&ID=58477&OSID=-1&driverLanguage=42
    bios-20070709111839.zip
    After the flashing procedure the machine rebooted automatically, but unfortunately it now keeps hanging at the Thoshiba welcome screen. Also pressing F2 or F12 won't change anything. It seems like the BIOS is corrupt.
    I saw, that in the BIOS package are delivered two flash files (s10gm590.rom and s10pm590.rom). But just executing the SanAntonion10 BIOS590MP.exe a .vbs script is started that decides automatically chooses and loads a flash file. Maybe it chose the wrong one?
    What shall I do now? Is there a way to restore the BIOS, or do I have to send my notebook in?
    Thanks in advance
    MAT

    > Satellite A100-590 PSAA9E freezes on Toshiba welcome screen after BIOS update
    What to say Marc. It looks like you have used a wrong BIOS version or you have updated the BIOS in wrong way.
    You could try to access the BIOS and try to set the settings to default.
    Dont forget to save the settings if you will exit the BIOS.
    But if this procedure does not help, you will have to contact the ASP in your country.
    Possibly the guys will try to flash the BIOS again with other special version.
    Good luck
    Greetings

  • HP p6230a runs slow after bios update - Getting error BIODHD-8 on Diagnostic Tools

    After bios update my desktop runs so painfully slow it is unworkable.  Disk drive seems to be constantly hammered by processes that don't appear on task manager.  Running 64 bit windows 7 (sp1).  Running the diagnostic tools prior to boot up comes up with error code BIOHD-8 - A SMART test failed on the drive - please contact HP Support.  Ideally would like to get previous version of bios as machine was running well before update. 

    I will ask my HP Employee Expert colleagues about this internally. It will take a while for them to respond.
    the BIODHD-8 error code means your harddrive is failing and must be replaced.
    Back up everything that you possibly can before it fails and no longer boots up into Windows .
    is your notebook still within the standard warranty period of one year? A notebook hard disk is a warranty replaceable item.(no cost to you while within warranty) 
    HP notebook warranty status check website
    ****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
    2015 Microsoft MVP - Windows Experience Consumer

  • After bios update, my window media player got hang and headphone clarity is not proper

    HP Pavilion g6  after bios update, my window media player  got hang and headphone clarity is not proper

    Hello mathewstays,
    Which model of g6 do you have? Which operating system? I'll be able to better assist when I know this information.
    Thanks,
    ↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

  • Satellite Pro C850 wont work after Bios update

    my satellite pro c850 cd wont work after bios update from toshiba.
    what do i do?

    Saying: dont work you mean it does not power up or what do you mean exactly?
    Did you flash the BIOS properly?
    Possibly something went wrong during the update and this means that ROM module isnt flashed properly
    In most cases a special BIOS crisis disk would be needed to get it working
    Not quite sure if you can get it fixed by your own
    Check this thread. Maybe it helps:
    http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=59637
    Otherwise you need help from authorized service provider available in your country.

  • My Sony Xperia Z won't start /turn on after failed update attempt

    Try this  connect your phone to the wall charger > press andhold power & volume up > let it charge for 1 or 2 hours > after 2 hours > repair your phone with SUS Update Service (SUS) http://www.sonymobile.com/gb/tools/update-service/ http://www-support-downloads.sonymobile.com/Software%20Downloads/Update_Service_Setup-2.11.12.5.exe PC Companion (PCC)  Bridge (for Mac)   Alternatives on How to backup Xperias http://talk.sonymobile.com/thread/36355

    A similar problem to the other posters, my Sony Xperia Z won't start after a failed update attempt. Following the support suggestions on the Sony website (http://www.sonymobile.com/sg/support/faq/w8-walkman-phone/update-software/software-update-failed-ps101/) failed. Solutions posted on this forum thread (http://talk.sonymobile.com/t5/Xperia-Z-ZL-ZR/My-Sony-Xperia-Z-won-t-start-turn-on-after-failed-update-attempt/m-p/401787#M20133) have also failed. When I plug the phone into the wall charger, the LED comes on red, the SONY logo appears on my screen, followed by a message indicating that "The Software update failed. Make sure that your phone is connected to the computer and try again.", and then the phone turns itself off. The cycle repeats itself with no indication that my phone's actually being charged. Since it is unable to charge, plugging the phone into my computer does not trigger the update process to start, so I can't "try again", as the message so helpfully suggests. The computer also does not recognise my phone as being connected despite following the PC Companion's instructions to 1) unplug the device, 2) remove and replace the battery (which I can't do, because the battery is built in), and 3) turn it back on (which, again, I can't do, because the phone won't charge in the first place), before 4) plugging it back into the computer. Please help... Thank you.

  • Satellite A series does not start up after BIOS update

    After bios update with downloaded utility my notebook does not start up.
    Did this case covered by warranty?

    Im not quite sure if this would be covered by warranty. You should contact the ASP in your country for details but I presume its not covered.
    PS: Did you try this workaround:
    - remove battery, disconnect the AC adaptor
    - wait ~ 40min
    - connect both devices again and try to power up the notebook

Maybe you are looking for

  • Cisco AnyConnect VPN won't install, says There is a newer version of the AnyConnect client already installed

    I had an issue with my Cisco Anyconnect VPN not working, so uninstalled it. I've tried a new install and now I get the message "There is a newer version of the AnyConnect client installed" and it won't tell me install it at all. I've gone through var

  • Message Interfaces in ABAP Dictionary?

    Hi, I have imported an IDOC from R/3 into my XI System. Does anybody know where the structure of my imported IDOC is saved? Will this Idoc be mapped to some Dictionary structures? Where is the structure of the IDOC saved in XI? rg, markus

  • IPhoto 6 or 8

    I have iPhoto 4.03 and have just updated to Tiger. I would like to update iPhoto, which is the better software to use, 6 or 8? Thanks

  • Select query inside PL/SQL block.

    Hello Experts, I am just a beginner with PL/SQL. If I write a select query from client like SQL dev and fire it against a database, it gives me result. Eg: select * from employee; Now when I use the same Query inside a PL/SQL block suppose: Declare b

  • RSRPARAMETRIZA - Information Broadcasting - Dynamic Variant update Program

    Hi Alok, I had similar requirement in my project and we have implemented following solution, Create a customer exit variable on Date characteristics and do the following coding, I am giving you sample coding, get the first day of month using FM CALL