T61 display divided into sections

Help!
The T61 laptop display is divided into six full and two partial sections. I can see the word 'Microsoft' booting up in six sections of the screen; like looking through a fly's eye.
It goes into the recovery restore, which I completely restored, then it was working fine for a couple hours; I shut it down. Next day upon boot up it did the same split screen again and went into recover mode.
I know that fan is broke so I had a portable fan blowing on it when I did the system recovery.
Did this laptop overheat? What do I need to do to fix this laptop.
Please help.
Lavyn

Chances are that your machine needs a new motherboard.
Good luck.
Cheers,
George
In daily use: R60F, R500F, T61, T410
Collecting dust: T60
Enjoying retirement: A31p, T42p,
Non-ThinkPads: Panasonic CF-31 & CF-52, HP 8760W
Starting Thursday, 08/14/2014 I'll be away from the forums until further notice. Please do NOT send private messages since I won't be able to read them. Thank you.

Similar Messages

How can I get my iMac screen to divide into sections? I'm using OS X 9.2. Thanks.

How can I get my iMac screen to divide into sections? I'm using Maverick OS X 9.2. Thanks.

You cannot split a monitor up into sections in Mac OS X.
You can have separate monitor spaces or desktops that you can access using the Spaces or Mission Control functionality in OS X Mavericks.
You cannot split monitor views into seperate sections
There is no such way to do this in Mac OS X.
Do a search for an app called Cinch OR another app called A Better Snap Tool. Both of these apps are in the Mac App Store.
These may work for you.
http://www.irradiatedsoftware.com/cinch/

Problem displaying tooltip if one column is divided into 3 columns

Hi,
I have a column divided into 3 columns using custom cell render, tool tips are displayed correctly for sub 3 columns but once the user re sizes the column the tool tip locations are not accurate means in one column only all the tool tips are getting displayed. below is the code.
JTable table = new JTable(rowData, columnNames);
TableColumn col = table.getColumnModel().getColumn(1);
col.setCellRenderer(new MyTableCellRenderer());
public class MyTableCellRenderer implements TableCellRenderer {
     @Override
     public Component getTableCellRendererComponent(JTable arg0, Object arg1,
               boolean arg2, boolean arg3, int arg4, int arg5) {
          Object columnNames[] = { "propname", "oldvalue", "newvalue" };
          Object rowData[][] = { { "propname1", "oldvalue1ewewewewewewewewewewewewdddd", "newvalue1" },
                    { "propname2", "oldvalue2", "newvalue2" } };
          JTable dynTable = new JTable(rowData, columnNames);
          dynTable.getColumnModel().getColumn(0).setCellRenderer(new toolTipCellRenderer());
          dynTable.getColumnModel().getColumn(1).setCellRenderer(new toolTipCellRenderer());
          dynTable.getColumnModel().getColumn(2).setCellRenderer(new toolTipCellRenderer());
          return dynTable;
class toolTipCellRenderer extends DefaultTableCellRenderer {
@Override
public Component getTableCellRendererComponent (JTable table,Object value, boolean isSelected, boolean hasFocus, int row, int column){
Component c = super.getTableCellRendererComponent(table, value, isSelected, hasFocus, row, column);
( (JComponent) c ).setToolTipText(value.toString());
return c;
Please help thanks in advance
Edited by: Moin82 on Sep 14, 2010 12:44 AM
Edited by: Moin82 on Sep 14, 2010 12:44 AM

Use code tags to post codes -- [code]CODE[/code] will display asCODEOr click the CODE button and paste your code between the {code} tags that appear.
To get better help sooner, post a [SSCCE (Short, Self Contained, Compilable and Executable, Example Program)|http://mindprod.com/jgloss/sscce.html] that demonstrates the incorrect behaviour.
db

When ever enter the date start date up to next year same date between the days divided into 8 parts

when ever enter the date start date up to next year same date between the days divided into 8 parts
Q1.1 (YYYY) = 1st half of Quarter 1 for year YYYY
Q1.2 (YYYY) = 2nd half of Quarter1 for year YYYY
Q2.1 (YYYY) = 1st half of Quarter 2 for year YYYY
Q2.2 (YYYY) = 2nd half of Quarter 2 for year YYYY
Q3.1 (YYYY) = 1st half of Quarter 3 for year YYYY
Q3.2 (YYYY) = 2nd half of QuarterQ3 for year YYYY
Q4.1 (YYYY) = 1st half of Quarter 4 for year YYYY
Q4.2 (YYYY) = 2nd half of Quarter 4 for year YYYY
Here YYYY depicts the year.
e.g. Q1.2 (2014) depicts the 2nd half of Quarter 1 for year 2014.
The description of these values are explained below.
The table below provides the description about each value:
Quarter     Quarter Range      Start Date
Q1.1      1 Jan - 15 Feb         1st Jan
Q1.2      16 Feb-31 Mar         16th Feb
Q2.1      1 Apr- 15 May          1st Apr
Q2.2      16 May-30 June       16th May
Q3.1      1 Jul-15 Aug             1th Jul
Q3.2      16 Aug -30 Sep       16th Aug
Q4.1      1 Oct -15 Nov           1st Oct
Q4.2      16 Nov – 31 Dec      16th Nov
The dropdown values in time window needs to be updated as per date entered by the user in the Audit Plan start date and
should display the next four Quarter (each divided in 2 half i.e. Eight values ) along with the year from the selected Audit plan start date.
for eg. If the Plan start date is given as August 10 2013 then the Time window will display the following options:
Q3.2 (2013)
Q 4.1 (2013)
Q 4.2 (2013)
Q 1.1 (2014)
Q1.2 (2014)
Q2.1 (2014)
Q 2.2 (2014)
Q 3.1 (2014)
You can refer to the Table above and look that 10 Aug 2013 falls under the Q3.1 so Time window will display the next next 8 half Quarters ( Total 4 Quarter) till Q 3.1 for the year 2014.

Hello,
WITH half_quarters AS(
    SELECT ADD_MONTHS(TRUNC(DATE '2013-08-15','Q'), 3*(LEVEL - 1)) hq_start
           ,1 part
    FROM    dual
    CONNECT BY ROWNUM <= 5
    UNION ALL
    SELECT ADD_MONTHS(TRUNC(DATE '2013-08-15','Q'), 3*(LEVEL - 1) + 1) + 15 hq_start
           ,2 part
    FROM    dual
    CONNECT BY ROWNUM <= 5
,ordered_half_quarters AS(
    SELECT hq_start
           ,part
           ,ROW_NUMBER() OVER (ORDER BY hq_start) r
    FROM    half_quarters
    WHERE   hq_start > DATE '2013-08-15'
SELECT 'Q '||TO_CHAR(hq_start,'Q')||'.'||part||' ('||TO_CHAR(hq_start,'YYYY')||')' q
FROM    ordered_half_quarters
WHERE   r <= 8
ORDER BY r;
Q
Q 3.2 (2013)
Q 4.1 (2013)
Q 4.2 (2013)
Q 1.1 (2014)
Q 1.2 (2014)
Q 2.1 (2014)
Q 2.2 (2014)
Q 3.1 (2014)
half_quarters generates the start dates of every half of a quarter, starting with the begin of the first quarter that contains the sample date.
The next step is to order the dates and to select only those after the sample date.
The last part formats the output and orders the data.
Regards
Marcus

Breaking SSHR SIT into sections

Hi, I have a special information type which I have deployed to Self Service (SSHR). The thing is, I want to divide some of the fields into sections with headers even though I am using just one S.I.T to save the data.
For example say I have an SIT that contains name, age, job, position, location. I might want to group name and age into Personal Details with a header, then job, position and location into another section called Assignment Details. Something like that.
Is it possible to create sections with headers using personalization when the self service page is based on an S.I.T

ah cool thanks, that works. ive changed the code slightly so it takes an expression entered by a user, but the program seems to stop if a divide symbol (/) is entered, any ideas?
import java.io.*;
public class ReadJava {
      public static void main(String[] args) throws IOException {
          KeyboardInput in = new KeyboardInput();
       System.out.print("Please enter a string: ");
       String expr = in.readString(); //reading in a string from the keyboard
          StreamTokenizer st = new StreamTokenizer (new StringReader (expr));
          int tokenType;
          while ((tokenType = st.nextToken()) != StreamTokenizer.TT_EOF) {
              switch (st.ttype) {
              case StreamTokenizer.TT_WORD:
                  System.out.println ("word=" + st.sval);
                  break;
              case StreamTokenizer.TT_NUMBER:
                  System.out.println ("number=" + st.nval);
                  break;
              default:
                  System.out.println ("operator=" + (char)st.ttype);
                  break;
}e.g. entering (5/5) would cause the program to output..
operator=(
number=5.0
----

Display data into Chart Js

1
I Have Problem in display data into Chart Or chartJs ,
In my Controller I Return Json and
use it in javascript like this but i have
error that tell me 't' is undefined
$(document).ready(function () {
$.getJSON("/Report/GetTransactions/", function (data) {
debugger;
var ctx = document.getElementById("myChart").getContext("2d");
var myBarChart = new Chart(ctx).Bar(data);
debugger;
data = {
labels: ["January", "February", "March", "April", "May", "June", "July"],
datasets: [
label: "My First dataset",
fillColor: "rgba(220,220,220,0.5)",
strokeColor: "rgba(220,220,220,0.8)",
highlightFill: "rgba(220,220,220,0.75)",
highlightStroke: "rgba(220,220,220,1)",
data: [data]
label: "My Second dataset",
fillColor: "rgba(151,187,205,0.5)",
strokeColor: "rgba(151,187,205,0.8)",
highlightFill: "rgba(151,187,205,0.75)",
highlightStroke: "rgba(151,187,205,1)",
data: [data]
and my controller is this
return Json(_reportRepository.GetTransactions(), JsonRequestBehavior.AllowGet);

Hi Mario Castro,
                          In selection Screen initially u have to enter the input value after provides some user command only next screen will be trigger.
In the next screen PBO event you cant assign selection screen Variable into next screen fields.
Eg.
Selection Screen Variable
          s_belnr
           s_bukrs
           s_gjahr
Next Screen
           t_belnr
           t_bukrs
           t_gjahr
In PBO you can code
          t_belnr = s_belnr
          t_bukrs = s_bukrs
         s_gjahr = s_gjahr
Revert back if any difficulties to do.
Regards,
       Thangam.P

How do I split a large wall graphic on Illustrator into sections for printing?

I work in marketing and occasionally have to put together graphics on Illustrator.
I am currently putting together a large wall graphic for an exhibition and want to find out how to split it into sections for printing. It has a total length of 5757mm but will need to be split into 6 panels (4x 980mm, 1x 841mm & 1x 996mm)
It would be best for me to design this as one large graphic and then split it, however I'm not sure of the best way to do this.
Any help would be greatly appreciated!

Louise,
There is just room enough for the whole artwork in 1:1 within the Workspace.
You may create it as one entity, then create Artboards for each panel, but the exact way depends on a few things such as whether you are working with overlaps and whether the printer prints to the edge or has a non printing area.
You may need two sets of the artwork with every second artboard on each so that you end up with overlapping artboards for printing/assembly.

What organizer app has a really good WEEK VIEW like my Palm Pilot - it's a grid with days across the top. Below each day- the day is divided into hourly grids. When events are schdeuled across week - you get a mosaic of time blocks. Analogue - great

What organizer app has a really good WEEK VIEW like my Palm Pilot - it's a grid with days across the top. Below each day- the day
is divided into hourly grids. When events are schdeuled across week - you get a mosaic of time blocks. Analogue view is great way
to comprehend the time obligations as a molar pattern.
thx,
Fritz

I use Week Cal on the iPod. I think it was only $1.99. It is a lot better and does a lot more than the one that came with the Palm Pilot.
As you know, unlike the Palm Pilot, the iPod does not come with a desktop application that you can sync your iPod calendar to. Since I don't use Outlook, I have to use a Cloud based calendar to sync with my PC. I use Hotmail's calendar for that. (If your computer is a MAC, you can use iCal)

How to display records into a non table base block..

Hi,
Can anybody help me how to display records into a non table base block....
Find below is my coding but it only display the last record in the first line
in the block.
PROCEDURE CREATE_CARTON_QUESTION IS
CURSOR car_c IS
select /*+ rule */ question_id, question_description
from WHOP.QADB_QUESTIONS
where question_category = 'Carton'
and question_active_flag = 'Y';
v_found VARCHAR2(10);
v_status boolean;
v_error      varchar2(150);
v_count number;
car_r car_c%rowtype;
begin
begin
select count(*) into v_count
from WHOP.QADB_QUESTIONS
where question_category = 'Carton'
and question_active_flag = 'Y';
     exception
     when no_data_found then
     v_count := 0;
end;
if v_count > 0 then
for car_r in car_c loop
---populating carton questions
:la_carton.carton_question_id     := car_r.question_id;
:la_carton.carton_question_answer     := 'N';
:la_carton.carton_error_details     := null;
:la_carton.attribute2          := car_r.question_description;
end loop;
end if;
end;
Thanks in advance.
Regards,
Jun

Hi SNatapov,
Thanks for you reply but still I get this error...
FRM-40737 Illegal restricted procedure GO_BLOCK in WHEN-VALIDATE-ITEM trigger.
Please note that I call that program unit in the last field of my control block inside when-validate-item trigger the questions should be display in la_carton block which is my non-base table block.
Find below is the code....
begin
go_block('la_carton');
first_record;
for car_r in car_c loop
---populating carton questions
:la_carton.carton_question_id := car_r.question_id;
:la_carton.carton_question_answer := 'N';
:la_carton.carton_error_details := null;
:la_carton.attribute2 := car_r.question_description;
next_record;
end loop;
end;
Hoping you can help me this problem...
Thanks in advance.
Regards,
Jun

Error while changing the Display Attribute into Navigational Attribute

Hi all.. Gud Mrng.
I was changed the attribute (product) from display attribute into navigational attribute and while save and activating the info object it is not getting activated and it is throwing the below error message.
Error Message: u201CThe Info object is being used in several data targetsu201D
My Questions:
i) Do I need to delete the data from all the data targets (where this info object is using)??
ii) Do I need to delete data only from the main info object (Zmaterial)? Is this single action enough?
Please suggest me which action I need to follow & What are the precautions need to take while changing the Display Attribute (product) into Navigational attribute of info object (Zmaterial).
Thanks in advance.
Thanks & Regards,
B Venugopal

Hi Garima
Only in case of key figures we cannot change it from display to navigational.
If the info object is a characteristics then in the General tab of the info object if you select 'attribute only' then the iobj would be a display attribute only. If you leave it unmarked then you can use the iobj as a navigational atribute.
I am sure you know that these settings only mean if a IOBJ can be used as display or navigational. To use it as a navigational within another object you will have to change the settings from 'DIS' to 'NAV' for the said info object in the 'Attributes' tab of its parent info object.
Further if you use the parent info object in any data target / infio provider you will have to further mark the info object as 'navigational' while defining the attrbute of the said data target / info provider. The info object gets displayed in the data target / info provider attribute properties as 'parent IOBJ_info object'
Cheers
Umesh

My apple tv main menu no longer displays the "movies" section, just internet, computers, and settings. Does anyone know why or how to get it back up? Recently rented a movie directly through apple tv but can't see the movies section in main menu now.

My apple tv main menu no longer displays the "movies" section, just internet, computers, and settings. Does anyone know why or how to get it to show again? Recently rented a movie directly through apple tv but can't see the "movies" section in main menu now. WiFi and home sharing are working.

Welcome to the Apple Community.
Check the location setting for the iTunes Store is correct.
You might also try restarting the Apple TV by removing ALL the cables for 30 seconds.
Restart your router.
If you are still having problems try a restore.

Reg: Combining two display lists into one list

Dear All,
i want to combine two display lists into one display list. Please give the idea for this one issue.
*****************dispaly list 1 starting here*********************
*&      Form F_006_DISPLAY_LIST
*       text
* --> p1        text
* <-- p2        text
FORM F_006_DISPLAY_LIST.
* TABLES : LFA1 .
DATA : V_DEBIT_TOTAL TYPE P DECIMALS 2 ,
         V_CREDIT_TOTAL TYPE P DECIMALS 2 ,
         V_CLOSE_BAL TYPE P DECIMALS 2 .
DATA : V_CNT TYPE I .
SORT ITAB_OPG BY LIFNR.
LOOP AT ITAB_OPG.
    NEW-PAGE.
* Displaying Vendor Name
    SELECT SINGLE NAME1 FROM LFA1 INTO LFA1-NAME1 WHERE
                                             LIFNR EQ ITAB_OPG-LIFNR .
    FORMAT COLOR COL_POSITIVE INTENSIFIED ON.
    WRITE:/2 'Vendor Code:' ,
             ITAB_OPG-LIFNR ,
          40 LFA1-NAME1 .
    CLEAR : LFA1 .
    WRITE :/(190) SY-ULINE .
* Displaying Opening Balance
    FORMAT COLOR COL_NEGATIVE INTENSIFIED ON .
    READ TABLE ITAB_OPG WITH KEY LIFNR = ITAB_OPG-LIFNR .
    IF ITAB_OPG-BAL LE 0 .
      WRITE :/2 'Opening Balance for Period' , (4) S_MONAT-LOW , ':' ,
              171(18) ITAB_OPG-BAL .
    ELSE.
      WRITE :/2 'Opening Balance for Period' , (4) S_MONAT-LOW , ':' ,
              151(18) ITAB_OPG-BAL .
    ENDIF.
    WRITE :/(190) SY-ULINE .
* Displaying Line Items
    LOOP AT ITAB_DISPLAY WHERE LIFNR EQ ITAB_OPG-LIFNR.
      V_CNT = SY-TABIX MOD 2.
      IF V_CNT EQ 0.
        FORMAT COLOR COL_NORMAL INTENSIFIED ON.
      ELSE.
        FORMAT COLOR COL_NORMAL INTENSIFIED OFF.
      ENDIF.
* Selecting Bank Name and Cheque Number
      SELECT SINGLE CHECT HBKID INTO (PAYR-CHECT , PAYR-HBKID)
                           FROM PAYR WHERE
                    ZBUKR EQ P_BUKRS AND
                    VBLNR EQ ITAB_DISPLAY-BELNR AND
                    LIFNR EQ ITAB_DISPLAY-LIFNR .
      SELECT SINGLE BANKS BANKL INTO (T012-BANKS , T012-BANKL) FROM
             T012 WHERE BUKRS EQ P_BUKRS AND
                        HBKID EQ PAYR-HBKID.
      SELECT SINGLE BANKA INTO BNKA-BANKA FROM BNKA WHERE
                        BANKS EQ T012-BANKS AND
                        BANKL EQ T012-BANKL .
      WRITE :/2 ITAB_DISPLAY-BUDAT ,
             14 ITAB_DISPLAY-BELNR ,
             26 ITAB_DISPLAY-BLDAT ,
             40 ITAB_DISPLAY-XBLNR ,
             58(16) PAYR-CHECT ,
             75 BNKA-BANKA ,
            105(40) ITAB_DISPLAY-SGTXT ,
            146(4) ITAB_DISPLAY-BLART .
* Determinig Debit or Credit
      IF ITAB_DISPLAY-SHKZG EQ 'S'.
        V_DEBIT_TOTAL = V_DEBIT_TOTAL + ITAB_DISPLAY-DMBTR.
        WRITE:151(18) ITAB_DISPLAY-DMBTR ,
              171(18) SPACE .
      ELSEIF ITAB_DISPLAY-SHKZG EQ 'H'.
        V_CREDIT_TOTAL = V_CREDIT_TOTAL + ITAB_DISPLAY-DMBTR.
        WRITE:151(18) SPACE ,
              171(18) ITAB_DISPLAY-DMBTR .
      ENDIF.
      CLEAR : T012 , BNKA , PAYR .
    ENDLOOP.
    FORMAT COLOR COL_TOTAL INTENSIFIED ON.
    WRITE:/(190) SY-ULINE.
* Displaying Debit and Credit Totals
    WRITE:/125 TEXT-001 ,
       151(18) V_DEBIT_TOTAL ,
       171(18) V_CREDIT_TOTAL .
    WRITE:/(190) SY-ULINE.
* Displaying the Closing Balance
    FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
    V_CLOSE_BAL = ITAB_OPG-BAL + V_DEBIT_TOTAL - V_CREDIT_TOTAL .
    IF V_CLOSE_BAL GT 0.
      WRITE:/122 TEXT-002 ,
         151(18) V_CLOSE_BAL NO-SIGN. " D00K909674
    ELSEIF V_CLOSE_BAL LE 0.
      WRITE:/122 TEXT-002 ,
         171(18) V_CLOSE_BAL NO-SIGN. " D00K909674
    ENDIF.
    CLEAR : V_CLOSE_BAL.
ENDLOOP.
ENDFORM.                               " F_006_DISPLAY_LIST
*****************dispaly list 1 ending here*********************
*****************dispaly list 2 starting here*********************
*&      Form F_006_DISPLAY_LIST1
*       text
* --> p1        text
* <-- p2        text
FORM F_006_DISPLAY_LIST1 .
TABLES : KNA1 .
DATA : V_DEBIT_TOTAL1 TYPE P DECIMALS 2 ,
         V_CREDIT_TOTAL1 TYPE P DECIMALS 2 ,
         V_CLOSE_BAL1 TYPE P DECIMALS 2 .
DATA : V_CNT1 TYPE I .
SORT ITAB_OPG1 BY KUNNR.
LOOP AT ITAB_OPG1.
    NEW-PAGE.
* Displaying Vendor Name
    SELECT SINGLE NAME1 FROM KNA1 INTO KNA1-NAME1 WHERE
                                             KUNNR EQ ITAB_OPG1-KUNNR .
    FORMAT COLOR COL_POSITIVE INTENSIFIED ON.
    WRITE:/2 'Customer Code:' ,
             ITAB_OPG1-KUNNR ,
          40 KNA1-NAME1 .
    CLEAR : KNA1 .
    WRITE :/(190) SY-ULINE .
* Displaying Opening Balance
    FORMAT COLOR COL_NEGATIVE INTENSIFIED ON .
    READ TABLE ITAB_OPG1 WITH KEY KUNNR = ITAB_OPG1-KUNNR .
    IF ITAB_OPG1-BAL1 LE 0 .
      WRITE :/2 'Opening Balance for Period' , (4) S_MONAT-LOW , ':' ,
              171(18) ITAB_OPG1-BAL1 .
    ELSE.
      WRITE :/2 'Opening Balance for Period' , (4) S_MONAT-LOW , ':' ,
              151(18) ITAB_OPG1-BAL1 .
    ENDIF.
    WRITE :/(190) SY-ULINE .
* Displaying Line Items
    LOOP AT ITAB_DISPLAY1 WHERE KUNNR EQ ITAB_OPG1-KUNNR.
      V_CNT1 = SY-TABIX MOD 2.
      IF V_CNT1 EQ 0.
        FORMAT COLOR COL_NORMAL INTENSIFIED ON.
      ELSE.
        FORMAT COLOR COL_NORMAL INTENSIFIED OFF.
      ENDIF.
* Selecting Bank Name and Cheque Number
      SELECT SINGLE CHECT HBKID INTO (PAYR-CHECT , PAYR-HBKID)
                           FROM PAYR WHERE
                    ZBUKR EQ P_BUKRS AND
                    VBLNR EQ ITAB_DISPLAY1-BELNR AND
                    KUNNR EQ ITAB_DISPLAY1-KUNNR .
      SELECT SINGLE BANKS BANKL INTO (T012-BANKS , T012-BANKL) FROM
             T012 WHERE BUKRS EQ P_BUKRS AND
                        HBKID EQ PAYR-HBKID.
      SELECT SINGLE BANKA INTO BNKA-BANKA FROM BNKA WHERE
                        BANKS EQ T012-BANKS AND
                        BANKL EQ T012-BANKL .
      WRITE :/2 ITAB_DISPLAY1-BUDAT ,
             14 ITAB_DISPLAY1-BELNR ,
             26 ITAB_DISPLAY1-BLDAT ,
             40 ITAB_DISPLAY1-XBLNR ,
             58(16) PAYR-CHECT ,
             75 BNKA-BANKA ,
            105(40) ITAB_DISPLAY1-SGTXT ,
            146(4) ITAB_DISPLAY1-BLART .
* Determinig Debit or Credit
      IF ITAB_DISPLAY1-SHKZG EQ 'S'.
        V_DEBIT_TOTAL1 = V_DEBIT_TOTAL1 + ITAB_DISPLAY1-DMBTR.
        WRITE:151(18) ITAB_DISPLAY1-DMBTR ,
              171(18) SPACE .
      ELSEIF ITAB_DISPLAY1-SHKZG EQ 'H'.
        V_CREDIT_TOTAL1 = V_CREDIT_TOTAL1 + ITAB_DISPLAY1-DMBTR.
        WRITE:151(18) SPACE ,
              171(18) ITAB_DISPLAY1-DMBTR .
      ENDIF.
      CLEAR : T012 , BNKA , PAYR .
    ENDLOOP.
    FORMAT COLOR COL_TOTAL INTENSIFIED ON.
    WRITE:/(190) SY-ULINE.
* Displaying Debit and Credit Totals
    WRITE:/125 TEXT-001 ,
       151(18) V_DEBIT_TOTAL1,
       171(18) V_CREDIT_TOTAL1 .
    WRITE:/(190) SY-ULINE.
* Displaying the Closing Balance
    FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
    V_CLOSE_BAL1 = ITAB_OPG1-BAL1 + V_DEBIT_TOTAL1 - V_CREDIT_TOTAL1 .
    IF V_CLOSE_BAL1 GT 0.
      WRITE:/122 TEXT-002 ,
         151(18) V_CLOSE_BAL1 NO-SIGN. " D00K909674
    ELSEIF V_CLOSE_BAL1 LE 0.
      WRITE:/122 TEXT-002 ,
         171(18) V_CLOSE_BAL1 NO-SIGN. " D00K909674
    ENDIF.
    CLEAR : V_CLOSE_BAL1.
ENDLOOP.
ENDFORM.                    " F_006_DISPLAY_LIST1
*****************dispaly list 2 ending here*********************
Thanks,
Sankar M

Hi,
Can you post it as two halves ?
Regards,
Swarna Munukoti

Purchased book on itunes. can see it in itunes library on computer. doesn't display on books section of iphone so I can select it to sync.

purchased book on itunes. can see it in itunes library on computer. doesn't display on books section of iphone so I can select it to sync to iphone.

Try downloading the iBooks app and download there

Gone divided into 2 GB partitions when exported

Hi, I am a new guy here.
The subject says it all.
When I export a SELF CONTAINED .mov either to internal or external HD, it becomes divided into partitions, 2 GB "long". First comes the "Mother" part, "name.mov" and then, if the stuff is larger than 2 GB, other part(s) follow, named as "name-av.mov1" and so on... Besides, those files bear an FCP icon. For some reason... Not QT icons any more...
The "Mother" part works as a whole movie, so it is supposed to be OK but... It embarasses me, especially taking into account the fact that both FCP 5 and 6, when operated only for a few weeks after install, used to export movies in ONE convenient file, no matter the size. And those files were ordinary QT "iconed" files.
I swear, no adjustments whatsoever were made in various FCP setups regarding the EXPORT options.
Any suggestions? Thx.

OK, Thomas, thank you, I'll try this.
I have checked Limit Capture/Export File Segment Size to 20 GB and will try to export a movie to see what happens.
Editor,
so why then my system and HD rpm were allright before? Nothing has very much changed in my mac, you know...
Anyway, I will let you know if checking Limit Capture/Export File Segment Size to 20 GB cures out the mysterious self-setting-settings.
Cheers

Displaying PathGeometry into canvas take too long time

Hi every one,
I am working on spatial data with an application WPF and I would like to draw a map from data queries.
I got my data and I am able to draw them on a canvas with scroll bar and zoom.
My problem is when I want to zoom or scroll the canvas take a long time before draw the map.
The big problem is there :
Dim poly As New Polygon
poly.Stroke = Brushes.Red
poly.Fill = Brushes.Orange
poly.StrokeThickness = 5
Dim colPoint As New PointCollection
For i = 1 To geo.STNumPoints
Dim ls As New LineSegment()
colPoint.Add(New Point(geo.STPointN(i).STX.Value - extentA, geo.STPointN(i).STY.Value - extentB))
Next
colPoint.Add(New Point(geo.STPointN(1).STX.Value - extentA, geo.STPointN(1).STY.Value - extentB))
poly.Points = colPoint
masterCanvas.Children.Add(poly)
so the canvas is "masterCanvas" and i add each Polygon one by one. I would like if it is possible to gather all polygon into one "image" and then when it will refresh the canvas it will draw only one thing.
Regards.

Hi,
I found that you have posted it in the forum Acamar suggested.
http://social.msdn.microsoft.com/Forums/vstudio/en-US/e2d50b4e-0d76-4a3c-b229-521b648b54b3/displaying-pathgeometry-into-canvas-take-too-long-time?forum=wpf#e2d50b4e-0d76-4a3c-b229-521b648b54b3
Please just focus on that thread, and you could mark if any reply which is helpful as answer.
Thanks for your understanding.
Regards.
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

T61 display divided into sections

Similar Messages

Maybe you are looking for