T61 display failure after cleaning fan

Hello, I would like some advice.
I opened up my lenovo T61 laptop to clean out the fan and apply new thermal paste.
After I reassembled it however, the display had stopped working. The computer boots up normally and continues to run but there's no picture. I opened it up again and checked the lcd connector and it seems that everything is fine there. Yet there's still no video.
Anyone have any advice what more to check or do?
Thank you

Hello,
One thing you can try to do is connect an external monitor to the faulty machine as a form of troubleshooting to see if there is an image displayed on the external monitor. If you dont mind, try to connect one and inform me on what happens. Thank You
______________________________________________________________________________________________________________Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution!" This will help the rest of the community with similar issues identify the verified solution and benefit from it.

Similar Messages

  • Laptop LED goes on but NOTHING after cleaning fan ... possible motherboard problems

    So I took apart and cleaned my laptop. I thought it would go smoothly since I successfully did it last summer. However now I'm stuck in a situation where the power led goes on, but the laptop is completely silent except for spinning the fan every few seconds. I've tried putting in the memory and the hard drive, nothing! It's not the only situation I've found myself in - earlier after I dusted the heatsink/fan it gave a warning that the fan wasnt working. I think I solved that though, since the computer is spinning the fan, but I am pretty concerned for my laptop, so does anyone please have advice. Any would be appreciated here

    Hi @friedcomputerz2 
    OK, I see that your notebook will not longer bootup. It powers on, but does not proceed beyond a blank screen. I am happy to help with this.
    If you are not getting any error messages, flashing LED patterns, or beeps, then this is where to start, especially with the Hard reset.
    Computer Does not Start (Windows 7, Vista, XP)
    Let me know if there is any change after trying it.
    Malygris1
    I work on behalf of HP
    Please click Accept as Solution if you feel my post solved your issue, it will help others find the solution.
    Click Kudos Thumbs Up on the right to say “Thanks” for helping!

  • Satellite A30 still crashes after cleaning fans

    Dear All,
    I cleaned the heatsink and fans as suggested in many posts, found the "felt filter" and removed it. Since then my A30 runs a lot cooler and the fans come on less often. But, I still get these random crashes and restarts. I checked the event log and found the following message THE FOLLOWING BOOT-START OR SYSTEM-START DRIVER(S) FAILED TO LOAD:
    d_kmd. Can anyone give me some hints on resolving this problem?

    Mine allways does this there is no cure they allways seam to crash for no reason i even sent it of for repair it came back worked ok for a week then started crashing again! I was wondering if you could help me do you know where i can get hold of some re-boot discs for the sat a30 ive lost mine!! x pc princess

  • Glitchy Display after Clean install of Leopard (G5 dual 2 GHz, Radeon 9600)

    Hello,
    I'm having weird glitchy display issues after a clean install of Leopard on my work machine. There was years of crap on this machine, several user accounts and it was extremely slow. I was advised by my tech guy to wipe the HD and do a clean install of OSX Leopard and all my Apps (Adobe CS3 & Extensis Suitcase X1).
    I immediately noticed glitchy display issues. First, when i scroll over anything with my mighty mouse it leaves a trail of glitchy weirdness where my cursor was:
    http://i6.photobucket.com/albums/y239/dylandog/screenglitch2.png
    Second, in certain applications if i move a window my clicking and dragging the top bar or a window it starts "disintegrating" and getting all pixelated. If i shake the window while doing this it gets worse:
    http://i6.photobucket.com/albums/y239/dylandog/screenglitch1.png
    I ran software update thinking that would help...Still doing it.
    I also installed 4 GB of memory (the max for this machine) to try increase speed. It did increase speed, but I'm still experiencing the display issues.
    I'm going to run the CS3 updates now...I doubt that will fix it, but you never know.
    Does anyone have any suggestions on how, or what to do to fix this?
    Thanks in advance!!
    BTW, The specs on my machine are as follows:
    Power Mac G5
    Dual 2GHz circa 2005
    4GB RAM
    ATI Radeon 9600
    30" Cinema Display
    19" Planar PL1910M LCD
    OSX 10.5.1
    Message was edited by: Justin Lancaster

    Many people have reported that there ATI 9600's don't work well in leopard. Most were able to fix the problem by installing old ATI drivers, including me. I still get glitches but only when going from a full screen w/thousand color back to a million colors, but the glitches only affect the docks stacks.
    The guide can be found here: http://interandom.com/2007/10/31/leopard-ati-radeon-9600/
    Let us know how it goes. Good Luck.

  • Display error after boot

    I'm having an issue where the display fails after boot, and displays only a fixed noise pattern. The screen looks completely normal through POST, GRUB, and when initially loading the kernel, when the display is still in a text mode. After that, the screen goes black for a brief second, after which it returns displaying the mentioned noise pattern. The system appears unresponsive after this, and the only option is to shut down the system with the power button.
    Adding nomodeset or vga=794 to the kernel options resolves the issue. That is a temporary fix IMHO; I'd prefer something sturdier, which is my reason for posting. The issue appeared after a pacman -Syu about a week ago, I just haven't had time to look at it until now.
    I've added i915 to MODULES in mkinitcpio.conf and rebuilt as described here in an attempt to fix it, but it did not seem to have any effect.
    I believe this may be a KMS or a driver issue, but I do not know how to confirm or troubleshoot it. I would be grateful if anyone could shed some light on the issue, or point me in the right direction to find out what's causing the issue. Please let me know if any more logs should be attached. I'll try to attach a picture of the screen as well as a dmesg output from the failed startup later.
    lshw:
    toasty
    description: Notebook
    product: 64665WG
    vendor: LENOVO
    version: ThinkPad T61
    serial: L3D7847
    width: 64 bits
    capabilities: smbios-2.4 dmi-2.4 ldt16 vsyscall32
    configuration: administrator_password=disabled boot=normal chassis=notebook family=ThinkPad T61 frontpanel_password=unknown keyboard_password=disabled power-on_password=disabled uuid=DDF8B081-4A90-11CB-8172-A970EC5BB61F
    *-core
    description: Motherboard
    product: 64665WG
    vendor: LENOVO
    physical id: 0
    version: Not Available
    serial: VF1GA83J1A4
    *-firmware
    description: BIOS
    vendor: LENOVO
    physical id: 0
    version: 7LETB2WW (2.12 )
    date: 02/20/2008
    size: 128KiB
    capacity: 4032KiB
    capabilities: pci pcmcia pnp upgrade shadowing escd cdboot bootselect socketedrom edd acpi usb biosbootspecification
    *-cpu
    description: CPU
    product: Intel(R) Core(TM)2 Duo CPU T7250 @ 2.00GHz
    vendor: Intel Corp.
    physical id: 6
    bus info: cpu@0
    version: Intel(R) Core(TM)2 Duo CPU T7250 @ 2.00GHz
    slot: None
    size: 1600MHz
    capacity: 2001MHz
    width: 64 bits
    clock: 200MHz
    capabilities: fpu fpu_exception wp vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx x86-64 constant_tsc arch_perfmon pebs bts rep_good nopl aperfmperf pni dtes64 monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr pdcm lahf_lm ida dtherm tpr_shadow vnmi flexpriority cpufreq
    *-cache:0
    description: L1 cache
    physical id: a
    slot: Internal L1 Cache
    size: 64KiB
    capacity: 64KiB
    capabilities: synchronous internal write-back instruction
    *-cache:1
    description: L2 cache
    physical id: c
    slot: Internal L2 Cache
    size: 2MiB
    capacity: 2MiB
    capabilities: burst internal write-back unified
    *-cache
    description: L1 cache
    physical id: b
    slot: Internal L1 Cache
    size: 64KiB
    capacity: 64KiB
    capabilities: synchronous internal write-back data
    *-memory
    description: System Memory
    physical id: 2b
    slot: System board or motherboard
    size: 3GiB
    *-bank:0
    description: SODIMM DDR2 Synchronous 667 MHz (1,5 ns)
    physical id: 0
    slot: DIMM 1
    size: 1GiB
    width: 64 bits
    clock: 667MHz (1.5ns)
    *-bank:1
    description: SODIMM DDR2 Synchronous 667 MHz (1,5 ns)
    physical id: 1
    slot: DIMM 2
    size: 2GiB
    width: 64 bits
    clock: 667MHz (1.5ns)
    *-pci
    description: Host bridge
    product: Mobile PM965/GM965/GL960 Memory Controller Hub
    vendor: Intel Corporation
    physical id: 100
    bus info: pci@0000:00:00.0
    version: 0c
    width: 32 bits
    clock: 33MHz
    *-display:0
    description: VGA compatible controller
    product: Mobile GM965/GL960 Integrated Graphics Controller (primary)
    vendor: Intel Corporation
    physical id: 2
    bus info: pci@0000:00:02.0
    version: 0c
    width: 64 bits
    clock: 33MHz
    capabilities: msi pm vga_controller bus_master cap_list rom
    configuration: driver=i915 latency=0
    resources: irq:45 memory:f8100000-f81fffff memory:e0000000-efffffff ioport:1800(size=8)
    *-display:1 UNCLAIMED
    description: Display controller
    product: Mobile GM965/GL960 Integrated Graphics Controller (secondary)
    vendor: Intel Corporation
    physical id: 2.1
    bus info: pci@0000:00:02.1
    version: 0c
    width: 64 bits
    clock: 33MHz
    capabilities: pm bus_master cap_list
    configuration: latency=0
    resources: memory:f8200000-f82fffff
    *-network
    description: Ethernet interface
    product: 82566MM Gigabit Network Connection
    vendor: Intel Corporation
    physical id: 19
    bus info: pci@0000:00:19.0
    logical name: eth0
    version: 03
    serial: 00:1c:25:7c:64:7b
    capacity: 1Gbit/s
    width: 32 bits
    clock: 33MHz
    capabilities: pm msi cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt-fd autonegotiation
    configuration: autonegotiation=on broadcast=yes driver=e1000e driverversion=2.3.2-k firmware=0.3-0 latency=0 link=no multicast=yes port=twisted pair
    resources: irq:49 memory:fe000000-fe01ffff memory:fe025000-fe025fff ioport:1840(size=32)
    *-usb:0
    description: USB controller
    product: 82801H (ICH8 Family) USB UHCI Controller #4
    vendor: Intel Corporation
    physical id: 1a
    bus info: pci@0000:00:1a.0
    version: 03
    width: 32 bits
    clock: 33MHz
    capabilities: uhci bus_master
    configuration: driver=uhci_hcd latency=0
    resources: irq:20 ioport:1860(size=32)
    *-usbhost
    product: UHCI Host Controller
    vendor: Linux 3.15.1-1-ARCH uhci_hcd
    physical id: 1
    bus info: usb@1
    logical name: usb1
    version: 3.15
    capabilities: usb-1.10
    configuration: driver=hub slots=2 speed=12Mbit/s
    *-usb:0
    description: Bluetooth wireless interface
    product: BCM2045B
    vendor: Broadcom Corp
    physical id: 1
    bus info: usb@1:1
    version: 1.00
    capabilities: bluetooth usb-2.00
    configuration: driver=btusb speed=12Mbit/s
    *-usb:1 UNCLAIMED
    description: Generic USB device
    product: Biometric Coprocessor
    vendor: STMicroelectronics
    physical id: 2
    bus info: usb@1:2
    version: 0.01
    capabilities: usb-1.00
    configuration: maxpower=100mA speed=12Mbit/s
    *-usb:1
    description: USB controller
    product: 82801H (ICH8 Family) USB UHCI Controller #5
    vendor: Intel Corporation
    physical id: 1a.1
    bus info: pci@0000:00:1a.1
    version: 03
    width: 32 bits
    clock: 33MHz
    capabilities: uhci
    configuration: driver=uhci_hcd latency=0
    resources: irq:21 ioport:1880(size=32)
    *-usbhost
    product: UHCI Host Controller
    vendor: Linux 3.15.1-1-ARCH uhci_hcd
    physical id: 1
    bus info: usb@2
    logical name: usb2
    version: 3.15
    capabilities: usb-1.10
    configuration: driver=hub slots=2 speed=12Mbit/s
    *-usb:2
    description: USB controller
    product: 82801H (ICH8 Family) USB2 EHCI Controller #2
    vendor: Intel Corporation
    physical id: 1a.7
    bus info: pci@0000:00:1a.7
    version: 03
    width: 32 bits
    clock: 33MHz
    capabilities: pm ehci bus_master cap_list
    configuration: driver=ehci-pci latency=0
    resources: irq:22 memory:fe226c00-fe226fff
    *-usbhost
    product: EHCI Host Controller
    vendor: Linux 3.15.1-1-ARCH ehci_hcd
    physical id: 1
    bus info: usb@6
    logical name: usb6
    version: 3.15
    capabilities: usb-2.00
    configuration: driver=hub slots=4 speed=480Mbit/s
    *-multimedia
    description: Audio device
    product: 82801H (ICH8 Family) HD Audio Controller
    vendor: Intel Corporation
    physical id: 1b
    bus info: pci@0000:00:1b.0
    version: 03
    width: 64 bits
    clock: 33MHz
    capabilities: pm msi pciexpress bus_master cap_list
    configuration: driver=snd_hda_intel latency=0
    resources: irq:47 memory:fe020000-fe023fff
    *-pci:0
    description: PCI bridge
    product: 82801H (ICH8 Family) PCI Express Port 1
    vendor: Intel Corporation
    physical id: 1c
    bus info: pci@0000:00:1c.0
    version: 03
    width: 32 bits
    clock: 33MHz
    capabilities: pci pciexpress msi pm normal_decode bus_master cap_list
    configuration: driver=pcieport
    resources: irq:40 ioport:2000(size=4096) memory:fc000000-fdffffff ioport:f8000000(size=1048576)
    *-pci:1
    description: PCI bridge
    product: 82801H (ICH8 Family) PCI Express Port 2
    vendor: Intel Corporation
    physical id: 1c.1
    bus info: pci@0000:00:1c.1
    version: 03
    width: 32 bits
    clock: 33MHz
    capabilities: pci pciexpress msi pm normal_decode bus_master cap_list
    configuration: driver=pcieport
    resources: irq:41 ioport:3000(size=4096) memory:dc000000-df3fffff ioport:dfe00000(size=1048576)
    *-network
    description: Wireless interface
    product: PRO/Wireless 3945ABG [Golan] Network Connection
    vendor: Intel Corporation
    physical id: 0
    bus info: pci@0000:03:00.0
    logical name: wlan0
    version: 02
    serial: 00:1f:3c:28:8e:0d
    width: 32 bits
    clock: 33MHz
    capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless
    configuration: broadcast=yes driver=iwl3945 driverversion=3.15.1-1-ARCH firmware=15.32.2.9 ip=192.168.1.12 latency=0 link=yes multicast=yes wireless=IEEE 802.11abg
    resources: irq:48 memory:df3ff000-df3fffff
    *-pci:2
    description: PCI bridge
    product: 82801H (ICH8 Family) PCI Express Port 3
    vendor: Intel Corporation
    physical id: 1c.2
    bus info: pci@0000:00:1c.2
    version: 03
    width: 32 bits
    clock: 33MHz
    capabilities: pci pciexpress msi pm normal_decode bus_master cap_list
    configuration: driver=pcieport
    resources: irq:42 ioport:4000(size=4096) memory:d8000000-d9ffffff ioport:dfb00000(size=1048576)
    *-pci:3
    description: PCI bridge
    product: 82801H (ICH8 Family) PCI Express Port 4
    vendor: Intel Corporation
    physical id: 1c.3
    bus info: pci@0000:00:1c.3
    version: 03
    width: 32 bits
    clock: 33MHz
    capabilities: pci pciexpress msi pm normal_decode bus_master cap_list
    configuration: driver=pcieport
    resources: irq:43 ioport:5000(size=4096) memory:d4000000-d5ffffff ioport:df800000(size=1048576)
    *-pci:4
    description: PCI bridge
    product: 82801H (ICH8 Family) PCI Express Port 5
    vendor: Intel Corporation
    physical id: 1c.4
    bus info: pci@0000:00:1c.4
    version: 03
    width: 32 bits
    clock: 33MHz
    capabilities: pci pciexpress msi pm normal_decode bus_master cap_list
    configuration: driver=pcieport
    resources: irq:44 ioport:6000(size=4096) memory:d0000000-d1ffffff ioport:df500000(size=1048576)
    *-usb:3
    description: USB controller
    product: 82801H (ICH8 Family) USB UHCI Controller #1
    vendor: Intel Corporation
    physical id: 1d
    bus info: pci@0000:00:1d.0
    version: 03
    width: 32 bits
    clock: 33MHz
    capabilities: uhci
    configuration: driver=uhci_hcd latency=0
    resources: irq:16 ioport:18a0(size=32)
    *-usbhost
    product: UHCI Host Controller
    vendor: Linux 3.15.1-1-ARCH uhci_hcd
    physical id: 1
    bus info: usb@3
    logical name: usb3
    version: 3.15
    capabilities: usb-1.10
    configuration: driver=hub slots=2 speed=12Mbit/s
    *-usb:4
    description: USB controller
    product: 82801H (ICH8 Family) USB UHCI Controller #2
    vendor: Intel Corporation
    physical id: 1d.1
    bus info: pci@0000:00:1d.1
    version: 03
    width: 32 bits
    clock: 33MHz
    capabilities: uhci
    configuration: driver=uhci_hcd latency=0
    resources: irq:17 ioport:18c0(size=32)
    *-usbhost
    product: UHCI Host Controller
    vendor: Linux 3.15.1-1-ARCH uhci_hcd
    physical id: 1
    bus info: usb@4
    logical name: usb4
    version: 3.15
    capabilities: usb-1.10
    configuration: driver=hub slots=2 speed=12Mbit/s
    *-usb:5
    description: USB controller
    product: 82801H (ICH8 Family) USB UHCI Controller #3
    vendor: Intel Corporation
    physical id: 1d.2
    bus info: pci@0000:00:1d.2
    version: 03
    width: 32 bits
    clock: 33MHz
    capabilities: uhci
    configuration: driver=uhci_hcd latency=0
    resources: irq:18 ioport:18e0(size=32)
    *-usbhost
    product: UHCI Host Controller
    vendor: Linux 3.15.1-1-ARCH uhci_hcd
    physical id: 1
    bus info: usb@5
    logical name: usb5
    version: 3.15
    capabilities: usb-1.10
    configuration: driver=hub slots=2 speed=12Mbit/s
    *-usb:6
    description: USB controller
    product: 82801H (ICH8 Family) USB2 EHCI Controller #1
    vendor: Intel Corporation
    physical id: 1d.7
    bus info: pci@0000:00:1d.7
    version: 03
    width: 32 bits
    clock: 33MHz
    capabilities: pm debug ehci bus_master cap_list
    configuration: driver=ehci-pci latency=0
    resources: irq:19 memory:fe227000-fe2273ff
    *-usbhost
    product: EHCI Host Controller
    vendor: Linux 3.15.1-1-ARCH ehci_hcd
    physical id: 1
    bus info: usb@7
    logical name: usb7
    version: 3.15
    capabilities: usb-2.00
    configuration: driver=hub slots=6 speed=480Mbit/s
    *-pci:5
    description: PCI bridge
    product: 82801 Mobile PCI Bridge
    vendor: Intel Corporation
    physical id: 1e
    bus info: pci@0000:00:1e.0
    version: f3
    width: 32 bits
    clock: 33MHz
    capabilities: pci subtractive_decode bus_master cap_list
    resources: ioport:7000(size=16384) memory:f8300000-fbffffff ioport:f4000000(size=67108864)
    *-pcmcia
    description: CardBus bridge
    product: RL5c476 II
    vendor: Ricoh Co Ltd
    physical id: 0
    bus info: pci@0000:15:00.0
    version: ba
    width: 64 bits
    clock: 33MHz
    capabilities: pcmcia bus_master cap_list
    configuration: driver=yenta_cardbus latency=176 maxlatency=5 mingnt=128
    resources: iomemory:b01716150-b0171614f irq:16 memory:f8300000-f8300fff ioport:7000(size=256) ioport:7400(size=256) memory:f4000000-f7ffffff memory:c0000000-c3ffffff
    *-firewire
    description: FireWire (IEEE 1394)
    product: R5C832 IEEE 1394 Controller
    vendor: Ricoh Co Ltd
    physical id: 0.1
    bus info: pci@0000:15:00.1
    version: 04
    width: 32 bits
    clock: 33MHz
    capabilities: pm ohci bus_master cap_list
    configuration: driver=firewire_ohci latency=64 maxlatency=4 mingnt=2
    resources: irq:17 memory:f8301000-f83017ff
    *-generic:0
    description: SD Host controller
    product: R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter
    vendor: Ricoh Co Ltd
    physical id: 0.2
    bus info: pci@0000:15:00.2
    version: 21
    width: 32 bits
    clock: 33MHz
    capabilities: pm bus_master cap_list
    configuration: driver=sdhci-pci latency=64
    resources: irq:18 memory:f8301800-f83018ff
    *-generic:1
    description: System peripheral
    product: R5C592 Memory Stick Bus Host Adapter
    vendor: Ricoh Co Ltd
    physical id: 0.4
    bus info: pci@0000:15:00.4
    version: 11
    width: 32 bits
    clock: 33MHz
    capabilities: pm bus_master cap_list
    configuration: driver=r592 latency=64
    resources: irq:18 memory:f8302000-f83020ff
    *-generic:2
    description: System peripheral
    product: xD-Picture Card Controller
    vendor: Ricoh Co Ltd
    physical id: 0.5
    bus info: pci@0000:15:00.5
    version: 11
    width: 32 bits
    clock: 33MHz
    capabilities: pm bus_master cap_list
    configuration: driver=r852 latency=64
    resources: irq:18 memory:f8302400-f83024ff
    *-isa
    description: ISA bridge
    product: 82801HEM (ICH8M-E) LPC Interface Controller
    vendor: Intel Corporation
    physical id: 1f
    bus info: pci@0000:00:1f.0
    version: 03
    width: 32 bits
    clock: 33MHz
    capabilities: isa bus_master cap_list
    configuration: driver=lpc_ich latency=0
    resources: irq:0
    *-ide
    description: IDE interface
    product: 82801HM/HEM (ICH8M/ICH8M-E) IDE Controller
    vendor: Intel Corporation
    physical id: 1f.1
    bus info: pci@0000:00:1f.1
    version: 03
    width: 32 bits
    clock: 33MHz
    capabilities: ide bus_master
    configuration: driver=ata_piix latency=0
    resources: irq:16 ioport:1f0(size=8) ioport:3f6 ioport:170(size=8) ioport:376 ioport:1c00(size=16)
    *-storage
    description: SATA controller
    product: 82801HM/HEM (ICH8M/ICH8M-E) SATA Controller [AHCI mode]
    vendor: Intel Corporation
    physical id: 1f.2
    bus info: pci@0000:00:1f.2
    version: 03
    width: 32 bits
    clock: 66MHz
    capabilities: storage msi pm ahci_1.0 bus_master cap_list
    configuration: driver=ahci latency=0
    resources: irq:46 ioport:1c50(size=8) ioport:1c44(size=4) ioport:1c48(size=8) ioport:1c40(size=4) ioport:1c20(size=32) memory:fe226000-fe2267ff
    *-serial
    description: SMBus
    product: 82801H (ICH8 Family) SMBus Controller
    vendor: Intel Corporation
    physical id: 1f.3
    bus info: pci@0000:00:1f.3
    version: 03
    width: 32 bits
    clock: 33MHz
    configuration: driver=i801_smbus latency=0
    resources: irq:23 memory:fe227400-fe2274ff ioport:1c60(size=32)
    *-battery
    product: 92P1131
    vendor: SANYO
    physical id: 1
    slot: Rear
    capacity: 71280mWh
    configuration: voltage=10,8V
    UPDATE:
    The pattern appears for a few seconds before the screen goes completely black.
    dmesg:
    [ 0.000000] Initializing cgroup subsys cpuset
    [ 0.000000] Initializing cgroup subsys cpu
    [ 0.000000] Linux version 3.7.5-1-ARCH (tobias@T-POWA-LX) (gcc version 4.7.2 (GCC) ) #1 SMP PREEMPT Mon Jan 28 10:03:32 CET 2013
    [ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=6ba82705-70eb-4c55-baeb-0ae928385e41 ro quiet 3 processor.max_cstate=3
    [ 0.000000] e820: BIOS-provided physical RAM map:
    [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable
    [ 0.000000] BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000000d2000-0x00000000000d3fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000be6affff] usable
    [ 0.000000] BIOS-e820: [mem 0x00000000be6b0000-0x00000000be6cbfff] ACPI data
    [ 0.000000] BIOS-e820: [mem 0x00000000be6cc000-0x00000000be6fffff] ACPI NVS
    [ 0.000000] BIOS-e820: [mem 0x00000000be700000-0x00000000beffffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000f0000000-0x00000000f3ffffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec0ffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed003ff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fed14000-0x00000000fed19fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed8ffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
    [ 0.000000] NX (Execute Disable) protection: active
    [ 0.000000] SMBIOS 2.4 present.
    [ 0.000000] DMI: LENOVO 64665WG/64665WG, BIOS 7LETB2WW (2.12 ) 02/20/2008
    [ 0.000000] e820: update [mem 0x00000000-0x0000ffff] usable ==> reserved
    [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
    [ 0.000000] No AGP bridge found
    [ 0.000000] e820: last_pfn = 0xbe6b0 max_arch_pfn = 0x400000000
    [ 0.000000] MTRR default type: uncachable
    [ 0.000000] MTRR fixed ranges enabled:
    [ 0.000000] 00000-9FFFF write-back
    [ 0.000000] A0000-BFFFF uncachable
    [ 0.000000] C0000-CFFFF write-protect
    [ 0.000000] D0000-DFFFF uncachable
    [ 0.000000] E0000-FFFFF write-protect
    [ 0.000000] MTRR variable ranges enabled:
    [ 0.000000] 0 base 0BF000000 mask FFF000000 uncachable
    [ 0.000000] 1 base 000000000 mask F80000000 write-back
    [ 0.000000] 2 base 080000000 mask FC0000000 write-back
    [ 0.000000] 3 base 0BE700000 mask FFFF00000 uncachable
    [ 0.000000] 4 base 0BE800000 mask FFF800000 uncachable
    [ 0.000000] 5 disabled
    [ 0.000000] 6 disabled
    [ 0.000000] 7 disabled
    [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
    [ 0.000000] found SMP MP-table at [mem 0x000f6900-0x000f690f] mapped at [ffff8800000f6900]
    [ 0.000000] initial memory mapped: [mem 0x00000000-0x1fffffff]
    [ 0.000000] Base memory trampoline at [ffff880000097000] 97000 size 24576
    [ 0.000000] init_memory_mapping: [mem 0x00000000-0xbe6affff]
    [ 0.000000] [mem 0x00000000-0xbe5fffff] page 2M
    [ 0.000000] [mem 0xbe600000-0xbe6affff] page 4k
    [ 0.000000] kernel direct mapping tables up to 0xbe6affff @ [mem 0x1fffb000-0x1fffffff]
    [ 0.000000] RAMDISK: [mem 0x37a10000-0x37cfffff]
    [ 0.000000] ACPI: RSDP 00000000000f68d0 00024 (v02 LENOVO)
    [ 0.000000] ACPI: XSDT 00000000be6bb74d 00094 (v01 LENOVO TP-7L 00002120 LTP 00000000)
    [ 0.000000] ACPI: FACP 00000000be6bb800 000F4 (v03 LENOVO TP-7L 00002120 LNVO 00000001)
    [ 0.000000] ACPI BIOS Bug: Warning: 32/64X length mismatch in FADT/Gpe1Block: 0/32 (20120913/tbfadt-567)
    [ 0.000000] ACPI BIOS Bug: Warning: Optional FADT field Gpe1Block has zero address or length: 0x000000000000102C/0x0 (20120913/tbfadt-598)
    [ 0.000000] ACPI: DSDT 00000000be6bbc1d 0FF03 (v01 LENOVO TP-7L 00002120 MSFT 03000000)
    [ 0.000000] ACPI: FACS 00000000be6e4000 00040
    [ 0.000000] ACPI: SSDT 00000000be6bb9b4 00269 (v01 LENOVO TP-7L 00002120 MSFT 03000000)
    [ 0.000000] ACPI: ECDT 00000000be6cbb20 00052 (v01 LENOVO TP-7L 00002120 LNVO 00000001)
    [ 0.000000] ACPI: TCPA 00000000be6cbb72 00032 (v02 LENOVO TP-7L 00002120 LNVO 00000001)
    [ 0.000000] ACPI: APIC 00000000be6cbba4 00068 (v01 LENOVO TP-7L 00002120 LNVO 00000001)
    [ 0.000000] ACPI: MCFG 00000000be6cbc0c 0003C (v01 LENOVO TP-7L 00002120 LNVO 00000001)
    [ 0.000000] ACPI: HPET 00000000be6cbc48 00038 (v01 LENOVO TP-7L 00002120 LNVO 00000001)
    [ 0.000000] ACPI: SLIC 00000000be6cbdf0 00176 (v01 LENOVO TP-7L 00002120 LTP 00000000)
    [ 0.000000] ACPI: BOOT 00000000be6cbf66 00028 (v01 LENOVO TP-7L 00002120 LTP 00000001)
    [ 0.000000] ACPI: ASF! 00000000be6cbf8e 00072 (v16 LENOVO TP-7L 00002120 PTL 00000001)
    [ 0.000000] ACPI: SSDT 00000000be6e234d 0025F (v01 LENOVO TP-7L 00002120 INTL 20050513)
    [ 0.000000] ACPI: SSDT 00000000be6e25ac 000A6 (v01 LENOVO TP-7L 00002120 INTL 20050513)
    [ 0.000000] ACPI: SSDT 00000000be6e2652 004F7 (v01 LENOVO TP-7L 00002120 INTL 20050513)
    [ 0.000000] ACPI: SSDT 00000000be6e2b49 001D8 (v01 LENOVO TP-7L 00002120 INTL 20050513)
    [ 0.000000] ACPI: DMI detected: Lenovo ThinkPad T61
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] No NUMA configuration found
    [ 0.000000] Faking a node at [mem 0x0000000000000000-0x00000000be6affff]
    [ 0.000000] Initmem setup node 0 [mem 0x00000000-0xbe6affff]
    [ 0.000000] NODE_DATA [mem 0xbe6ac000-0xbe6affff]
    [ 0.000000] [ffffea0000000000-ffffea0002ffffff] PMD -> [ffff8800bae00000-ffff8800bddfffff] on node 0
    [ 0.000000] Zone ranges:
    [ 0.000000] DMA [mem 0x00010000-0x00ffffff]
    [ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
    [ 0.000000] Normal empty
    [ 0.000000] Movable zone start for each node
    [ 0.000000] Early memory node ranges
    [ 0.000000] node 0: [mem 0x00010000-0x0009cfff]
    [ 0.000000] node 0: [mem 0x00100000-0xbe6affff]
    [ 0.000000] On node 0 totalpages: 779837
    [ 0.000000] DMA zone: 64 pages used for memmap
    [ 0.000000] DMA zone: 6 pages reserved
    [ 0.000000] DMA zone: 3911 pages, LIFO batch:0
    [ 0.000000] DMA32 zone: 12123 pages used for memmap
    [ 0.000000] DMA32 zone: 763733 pages, LIFO batch:31
    [ 0.000000] ACPI: PM-Timer IO Port: 0x1008
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
    [ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
    [ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
    [ 0.000000] ACPI: IRQ0 used by override.
    [ 0.000000] ACPI: IRQ2 used by override.
    [ 0.000000] ACPI: IRQ9 used by override.
    [ 0.000000] Using ACPI (MADT) for SMP configuration information
    [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
    [ 0.000000] smpboot: Allowing 2 CPUs, 0 hotplug CPUs
    [ 0.000000] nr_irqs_gsi: 40
    [ 0.000000] PM: Registered nosave memory: 000000000009d000 - 000000000009e000
    [ 0.000000] PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
    [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000d2000
    [ 0.000000] PM: Registered nosave memory: 00000000000d2000 - 00000000000d4000
    [ 0.000000] PM: Registered nosave memory: 00000000000d4000 - 00000000000e0000
    [ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
    [ 0.000000] e820: [mem 0xbf000000-0xefffffff] available for PCI devices
    [ 0.000000] Booting paravirtualized kernel on bare hardware
    [ 0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:2 nr_node_ids:1
    [ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff8800be400000 s84608 r8192 d21888 u1048576
    [ 0.000000] pcpu-alloc: s84608 r8192 d21888 u1048576 alloc=1*2097152
    [ 0.000000] pcpu-alloc: [0] 0 1
    [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 767644
    [ 0.000000] Policy zone: DMA32
    [ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=6ba82705-70eb-4c55-baeb-0ae928385e41 ro quiet 3 processor.max_cstate=3
    [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
    [ 0.000000] __ex_table already sorted, skipping sort
    [ 0.000000] Checking aperture...
    [ 0.000000] No AGP bridge found
    [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
    [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
    [ 0.000000] Memory: 3055496k/3119808k available (4883k kernel code, 460k absent, 63852k reserved, 4030k data, 812k init)
    [ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
    [ 0.000000] Preemptible hierarchical RCU implementation.
    [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
    [ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
    [ 0.000000] RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=2.
    [ 0.000000] NR_IRQS:4352 nr_irqs:512 16
    [ 0.000000] Extended CMOS year: 2000
    [ 0.000000] Console: colour dummy device 80x25
    [ 0.000000] console [tty0] enabled
    [ 0.000000] allocated 12582912 bytes of page_cgroup
    [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
    [ 0.000000] hpet clockevent registered
    [ 0.000000] tsc: Fast TSC calibration using PIT
    [ 0.000000] tsc: Detected 1994.883 MHz processor
    [ 0.003338] Calibrating delay loop (skipped), value calculated using timer frequency.. 3991.00 BogoMIPS (lpj=6649610)
    [ 0.003345] pid_max: default: 32768 minimum: 301
    [ 0.003411] Security Framework initialized
    [ 0.003429] AppArmor: AppArmor disabled by boot time parameter
    [ 0.004096] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
    [ 0.009707] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
    [ 0.011314] Mount-cache hash table entries: 256
    [ 0.011743] Initializing cgroup subsys cpuacct
    [ 0.011749] Initializing cgroup subsys memory
    [ 0.011767] Initializing cgroup subsys devices
    [ 0.011769] Initializing cgroup subsys freezer
    [ 0.011772] Initializing cgroup subsys net_cls
    [ 0.011775] Initializing cgroup subsys blkio
    [ 0.011826] CPU: Physical Processor ID: 0
    [ 0.011829] CPU: Processor Core ID: 0
    [ 0.011833] mce: CPU supports 6 MCE banks
    [ 0.011846] CPU0: Thermal monitoring enabled (TM2)
    [ 0.011853] process: using mwait in idle threads
    [ 0.011861] Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4
    Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32
    tlb_flushall_shift: -1
    [ 0.012032] Freeing SMP alternatives: 16k freed
    [ 0.014357] ACPI: Core revision 20120913
    [ 0.030022] ftrace: allocating 18793 entries in 74 pages
    [ 0.043969] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
    [ 0.078117] smpboot: CPU0: Intel(R) Core(TM)2 Duo CPU T7250 @ 2.00GHz (fam: 06, model: 0f, stepping: 0d)
    [ 0.079999] Performance Events: PEBS fmt0+, 4-deep LBR, Core2 events, Intel PMU driver.
    [ 0.079999] perf_event_intel: PEBS disabled due to CPU errata
    [ 0.079999] ... version: 2
    [ 0.079999] ... bit width: 40
    [ 0.079999] ... generic registers: 2
    [ 0.079999] ... value mask: 000000ffffffffff
    [ 0.079999] ... max period: 000000007fffffff
    [ 0.079999] ... fixed-purpose events: 3
    [ 0.079999] ... event mask: 0000000700000003
    [ 0.103422] smpboot: Booting Node 0, Processors #1 OK
    [ 0.116550] TSC synchronization [CPU#0 -> CPU#1]:
    [ 0.116555] Measured 1027940 cycles TSC warp between CPUs, turning off TSC clock.
    [ 0.116559] tsc: Marking TSC unstable due to check_tsc_sync_source failed
    [ 0.116688] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
    [ 0.116707] Brought up 2 CPUs
    [ 0.116712] smpboot: Total of 2 processors activated (7982.01 BogoMIPS)
    [ 0.118692] devtmpfs: initialized
    [ 0.121214] PM: Registering ACPI NVS region [mem 0xbe6cc000-0xbe6fffff] (212992 bytes)
    [ 0.121884] RTC time: 16:07:33, date: 02/11/13
    [ 0.121966] NET: Registered protocol family 16
    [ 0.121966] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
    [ 0.121966] ACPI: bus type pci registered
    [ 0.121966] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000)
    [ 0.121966] PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in E820
    [ 0.130348] PCI: Using configuration type 1 for base access
    [ 0.130570] mtrr: your CPUs had inconsistent variable MTRR settings
    [ 0.130572] mtrr: probably your BIOS does not setup all CPUs.
    [ 0.130575] mtrr: corrected configuration.
    [ 0.133373] bio: create slab <bio-0> at 0
    [ 0.133410] ACPI: Added _OSI(Module Device)
    [ 0.133410] ACPI: Added _OSI(Processor Device)
    [ 0.133410] ACPI: Added _OSI(3.0 _SCP Extensions)
    [ 0.133410] ACPI: Added _OSI(Processor Aggregator Device)
    [ 0.133410] ACPI: Added _OSI(Linux)
    [ 0.135453] ACPI: EC: EC description table is found, configuring boot EC
    [ 0.145385] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query honored via DMI
    [ 0.170056] ACPI: SSDT 00000000be6e1aef 0085E (v01 PmRef Cpu0Cst 00000100 INTL 20050513)
    [ 0.171067] ACPI: Dynamic OEM Table Load:
    [ 0.171073] ACPI: SSDT (null) 0085E (v01 PmRef Cpu0Cst 00000100 INTL 20050513)
    [ 0.171422] ACPI: SSDT 00000000be6e1a6a 00085 (v01 PmRef Cpu1Cst 00000100 INTL 20050513)
    [ 0.172356] ACPI: Dynamic OEM Table Load:
    [ 0.172362] ACPI: SSDT (null) 00085 (v01 PmRef Cpu1Cst 00000100 INTL 20050513)
    [ 0.172394] ACPI: Interpreter enabled
    [ 0.172394] ACPI: (supports S0 S3 S4 S5)
    [ 0.172394] ACPI: Using IOAPIC for interrupt routing
    [ 0.177412] ACPI: Power Resource [PUBS] (on)
    [ 0.180918] ACPI: EC: GPE = 0x12, I/O: command/status = 0x66, data = 0x62
    [ 0.184454] ACPI: ACPI Dock Station Driver: 3 docks/bays found
    [ 0.184462] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
    [ 0.184462] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
    [ 0.184462] pci_root PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
    [ 0.184462] PCI host bridge to bus 0000:00
    [ 0.184462] pci_bus 0000:00: root bus resource [bus 00-ff]
    [ 0.184462] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
    [ 0.184462] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
    [ 0.184462] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
    [ 0.184462] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff]
    [ 0.184462] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff]
    [ 0.184462] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff]
    [ 0.184462] pci_bus 0000:00: root bus resource [mem 0xbf000000-0xfebfffff]
    [ 0.184462] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed4bfff]
    [ 0.184462] pci 0000:00:00.0: [8086:2a00] type 00 class 0x060000
    [ 0.184462] pci 0000:00:02.0: [8086:2a02] type 00 class 0x030000
    [ 0.184462] pci 0000:00:02.0: reg 10: [mem 0xf8100000-0xf81fffff 64bit]
    [ 0.184462] pci 0000:00:02.0: reg 18: [mem 0xe0000000-0xefffffff 64bit pref]
    [ 0.184462] pci 0000:00:02.0: reg 20: [io 0x1800-0x1807]
    [ 0.184462] pci 0000:00:02.1: [8086:2a03] type 00 class 0x038000
    [ 0.184462] pci 0000:00:02.1: reg 10: [mem 0xf8200000-0xf82fffff 64bit]
    [ 0.184462] pci 0000:00:19.0: [8086:1049] type 00 class 0x020000
    [ 0.184462] pci 0000:00:19.0: reg 10: [mem 0xfe000000-0xfe01ffff]
    [ 0.184462] pci 0000:00:19.0: reg 14: [mem 0xfe025000-0xfe025fff]
    [ 0.184462] pci 0000:00:19.0: reg 18: [io 0x1840-0x185f]
    [ 0.184462] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
    [ 0.184462] pci 0000:00:1a.0: [8086:2834] type 00 class 0x0c0300
    [ 0.184588] pci 0000:00:1a.0: reg 20: [io 0x1860-0x187f]
    [ 0.184699] pci 0000:00:1a.1: [8086:2835] type 00 class 0x0c0300
    [ 0.184850] pci 0000:00:1a.1: reg 20: [io 0x1880-0x189f]
    [ 0.184992] pci 0000:00:1a.7: [8086:283a] type 00 class 0x0c0320
    [ 0.185046] pci 0000:00:1a.7: reg 10: [mem 0xfe226c00-0xfe226fff]
    [ 0.185305] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
    [ 0.185386] pci 0000:00:1b.0: [8086:284b] type 00 class 0x040300
    [ 0.185446] pci 0000:00:1b.0: reg 10: [mem 0xfe020000-0xfe023fff 64bit]
    [ 0.185725] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
    [ 0.185810] pci 0000:00:1c.0: [8086:283f] type 01 class 0x060400
    [ 0.186107] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
    [ 0.186189] pci 0000:00:1c.1: [8086:2841] type 01 class 0x060400
    [ 0.186472] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
    [ 0.186563] pci 0000:00:1c.2: [8086:2843] type 01 class 0x060400
    [ 0.186861] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
    [ 0.186951] pci 0000:00:1c.3: [8086:2845] type 01 class 0x060400
    [ 0.187249] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
    [ 0.187340] pci 0000:00:1c.4: [8086:2847] type 01 class 0x060400
    [ 0.187631] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
    [ 0.187718] pci 0000:00:1d.0: [8086:2830] type 00 class 0x0c0300
    [ 0.187866] pci 0000:00:1d.0: reg 20: [io 0x18a0-0x18bf]
    [ 0.187980] pci 0000:00:1d.1: [8086:2831] type 00 class 0x0c0300
    [ 0.188132] pci 0000:00:1d.1: reg 20: [io 0x18c0-0x18df]
    [ 0.188244] pci 0000:00:1d.2: [8086:2832] type 00 class 0x0c0300
    [ 0.188389] pci 0000:00:1d.2: reg 20: [io 0x18e0-0x18ff]
    [ 0.188540] pci 0000:00:1d.7: [8086:2836] type 00 class 0x0c0320
    [ 0.188605] pci 0000:00:1d.7: reg 10: [mem 0xfe227000-0xfe2273ff]
    [ 0.188893] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
    [ 0.188960] pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401
    [ 0.189213] pci 0000:00:1f.0: [8086:2811] type 00 class 0x060100
    [ 0.189448] pci 0000:00:1f.0: quirk: [io 0x1000-0x107f] claimed by ICH6 ACPI/GPIO/TCO
    [ 0.189461] pci 0000:00:1f.0: quirk: [io 0x1180-0x11bf] claimed by ICH6 GPIO
    [ 0.189471] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 1600 (mask 007f)
    [ 0.189479] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 15e0 (mask 000f)
    [ 0.189488] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 1680 (mask 001f)
    [ 0.189613] pci 0000:00:1f.1: [8086:2850] type 00 class 0x01018a
    [ 0.189656] pci 0000:00:1f.1: reg 10: [io 0x0000-0x0007]
    [ 0.189687] pci 0000:00:1f.1: reg 14: [io 0x0000-0x0003]
    [ 0.189719] pci 0000:00:1f.1: reg 18: [io 0x0000-0x0007]
    [ 0.189751] pci 0000:00:1f.1: reg 1c: [io 0x0000-0x0003]
    [ 0.189782] pci 0000:00:1f.1: reg 20: [io 0x1c00-0x1c0f]
    [ 0.189925] pci 0000:00:1f.2: [8086:2829] type 00 class 0x010601
    [ 0.190005] pci 0000:00:1f.2: reg 10: [io 0x1c50-0x1c57]
    [ 0.190036] pci 0000:00:1f.2: reg 14: [io 0x1c44-0x1c47]
    [ 0.190068] pci 0000:00:1f.2: reg 18: [io 0x1c48-0x1c4f]
    [ 0.190100] pci 0000:00:1f.2: reg 1c: [io 0x1c40-0x1c43]
    [ 0.190131] pci 0000:00:1f.2: reg 20: [io 0x1c20-0x1c3f]
    [ 0.190160] pci 0000:00:1f.2: reg 24: [mem 0xfe226000-0xfe2267ff]
    [ 0.190339] pci 0000:00:1f.2: PME# supported from D3hot
    [ 0.190403] pci 0000:00:1f.3: [8086:283e] type 00 class 0x0c0500
    [ 0.190448] pci 0000:00:1f.3: reg 10: [mem 0xfe227400-0xfe2274ff]
    [ 0.190562] pci 0000:00:1f.3: reg 20: [io 0x1c60-0x1c7f]
    [ 0.190820] pci 0000:00:1c.0: PCI bridge to [bus 02]
    [ 0.190833] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]
    [ 0.190845] pci 0000:00:1c.0: bridge window [mem 0xfc000000-0xfdffffff]
    [ 0.190863] pci 0000:00:1c.0: bridge window [mem 0xf8000000-0xf80fffff 64bit pref]
    [ 0.191139] pci 0000:03:00.0: [8086:4227] type 00 class 0x028000
    [ 0.191201] pci 0000:03:00.0: reg 10: [mem 0xdf3ff000-0xdf3fffff]
    [ 0.191653] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
    [ 0.200091] pci 0000:00:1c.1: PCI bridge to [bus 03]
    [ 0.200100] pci 0000:00:1c.1: bridge window [io 0x3000-0x3fff]
    [ 0.200108] pci 0000:00:1c.1: bridge window [mem 0xdc000000-0xdf3fffff]
    [ 0.200120] pci 0000:00:1c.1: bridge window [mem 0xdfe00000-0xdfefffff 64bit pref]
    [ 0.200236] pci 0000:00:1c.2: PCI bridge to [bus 04]
    [ 0.200248] pci 0000:00:1c.2: bridge window [io 0x4000-0x4fff]
    [ 0.200260] pci 0000:00:1c.2: bridge window [mem 0xd8000000-0xd9ffffff]
    [ 0.200280] pci 0000:00:1c.2: bridge window [mem 0xdfb00000-0xdfbfffff 64bit pref]
    [ 0.200446] pci 0000:00:1c.3: PCI bridge to [bus 05-0c]
    [ 0.200458] pci 0000:00:1c.3: bridge window [io 0x5000-0x5fff]
    [ 0.200470] pci 0000:00:1c.3: bridge window [mem 0xd4000000-0xd5ffffff]
    [ 0.200490] pci 0000:00:1c.3: bridge window [mem 0xdf800000-0xdf8fffff 64bit pref]
    [ 0.200649] pci 0000:00:1c.4: PCI bridge to [bus 0d-14]
    [ 0.200661] pci 0000:00:1c.4: bridge window [io 0x6000-0x6fff]
    [ 0.200671] pci 0000:00:1c.4: bridge window [mem 0xd0000000-0xd1ffffff]
    [ 0.200691] pci 0000:00:1c.4: bridge window [mem 0xdf500000-0xdf5fffff 64bit pref]
    [ 0.200808] pci 0000:15:00.0: [1180:0476] type 02 class 0x060700
    [ 0.200862] pci 0000:15:00.0: proprietary Ricoh MMC controller disabled (via cardbus function)
    [ 0.200865] pci 0000:15:00.0: MMC cards are now supported by standard SDHCI controller
    [ 0.200907] pci 0000:15:00.0: reg 10: [mem 0xf8300000-0xf8300fff]
    [ 0.201003] pci 0000:15:00.0: supports D1 D2
    [ 0.201008] pci 0000:15:00.0: PME# supported from D0 D1 D2 D3hot D3cold
    [ 0.201070] pci 0000:15:00.1: [1180:0832] type 00 class 0x0c0010
    [ 0.201128] pci 0000:15:00.1: reg 10: [mem 0xf8301000-0xf83017ff]
    [ 0.201392] pci 0000:15:00.1: supports D1 D2
    [ 0.201396] pci 0000:15:00.1: PME# supported from D0 D1 D2 D3hot D3cold
    [ 0.201459] pci 0000:15:00.2: [1180:0822] type 00 class 0x080500
    [ 0.201517] pci 0000:15:00.2: reg 10: [mem 0xf8301800-0xf83018ff]
    [ 0.201781] pci 0000:15:00.2: supports D1 D2
    [ 0.201785] pci 0000:15:00.2: PME# supported from D0 D1 D2 D3hot D3cold
    [ 0.201848] pci 0000:15:00.4: [1180:0592] type 00 class 0x088000
    [ 0.201907] pci 0000:15:00.4: reg 10: [mem 0xf8302000-0xf83020ff]
    [ 0.202168] pci 0000:15:00.4: supports D1 D2
    [ 0.202172] pci 0000:15:00.4: PME# supported from D0 D1 D2 D3hot D3cold
    [ 0.202235] pci 0000:15:00.5: [1180:0852] type 00 class 0x088000
    [ 0.202293] pci 0000:15:00.5: reg 10: [mem 0xf8302400-0xf83024ff]
    [ 0.202554] pci 0000:15:00.5: supports D1 D2
    [ 0.202558] pci 0000:15:00.5: PME# supported from D0 D1 D2 D3hot D3cold
    [ 0.202730] pci 0000:00:1e.0: PCI bridge to [bus 15-18] (subtractive decode)
    [ 0.202742] pci 0000:00:1e.0: bridge window [io 0x7000-0xafff]
    [ 0.202755] pci 0000:00:1e.0: bridge window [mem 0xf8300000-0xfbffffff]
    [ 0.202775] pci 0000:00:1e.0: bridge window [mem 0xf4000000-0xf7ffffff 64bit pref]
    [ 0.202779] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
    [ 0.202784] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
    [ 0.202788] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
    [ 0.202793] pci 0000:00:1e.0: bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode)
    [ 0.202797] pci 0000:00:1e.0: bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode)
    [ 0.202801] pci 0000:00:1e.0: bridge window [mem 0x000dc000-0x000dffff] (subtractive decode)
    [ 0.202806] pci 0000:00:1e.0: bridge window [mem 0xbf000000-0xfebfffff] (subtractive decode)
    [ 0.202810] pci 0000:00:1e.0: bridge window [mem 0xfed40000-0xfed4bfff] (subtractive decode)
    [ 0.202916] pci_bus 0000:16: busn_res: can not insert [bus 16-ff] under [bus 15-18] (conflicts with (null) [bus 15-18])
    [ 0.202927] pci_bus 0000:16: busn_res: [bus 16-ff] end is updated to 17
    [ 0.203040] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
    [ 0.203194] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP0._PRT]
    [ 0.203241] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP1._PRT]
    [ 0.203286] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP2._PRT]
    [ 0.203337] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP3._PRT]
    [ 0.203398] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP4._PRT]
    [ 0.203450] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
    [ 0.203867] pci0000:00: Requesting ACPI _OSC control (0x1d)
    [ 0.204419] pci0000:00: ACPI _OSC control (0x1d) granted
    [ 0.213100] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 *10 11)
    [ 0.213218] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11)
    [ 0.213338] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11)
    [ 0.213453] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11)
    [ 0.213566] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11)
    [ 0.213678] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11)
    [ 0.213795] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 *11)
    [ 0.213907] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 *11)
    [ 0.216702] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
    [ 0.216715] vgaarb: loaded
    [ 0.216718] vgaarb: bridge control possible 0000:00:02.0
    [ 0.216791] PCI: Using ACPI for IRQ routing
    [ 0.217268] PCI: pci_cache_line_size set to 64 bytes
    [ 0.217440] e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff]
    [ 0.217445] e820: reserve RAM buffer [mem 0xbe6b0000-0xbfffffff]
    [ 0.217631] NetLabel: Initializing
    [ 0.217635] NetLabel: domain hash size = 128
    [ 0.217637] NetLabel: protocols = UNLABELED CIPSOv4
    [ 0.217665] NetLabel: unlabeled traffic allowed by default
    [ 0.217694] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
    [ 0.217700] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
    [ 0.217708] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
    [ 0.230023] Switching to clocksource hpet
    [ 0.241152] pnp: PnP ACPI init
    [ 0.241186] ACPI: bus type pnp registered
    [ 0.241858] pnp 00:00: [mem 0x00000000-0x0009ffff]
    [ 0.241863] pnp 00:00: [mem 0x000c0000-0x000c3fff]
    [ 0.241868] pnp 00:00: [mem 0x000c4000-0x000c7fff]
    [ 0.241878] pnp 00:00: [mem 0x000c8000-0x000cbfff]
    [ 0.241882] pnp 00:00: [mem 0x000cc000-0x000cffff]
    [ 0.241886] pnp 00:00: [mem 0x000d0000-0x000d3fff]
    [ 0.241890] pnp 00:00: [mem 0x000d4000-0x000d3fff disabled]
    [ 0.241894] pnp 00:00: [mem 0x000d8000-0x000d7fff disabled]
    [ 0.241898] pnp 00:00: [mem 0x000dc000-0x000dbfff disabled]
    [ 0.241902] pnp 00:00: [mem 0x000e0000-0x000e3fff]
    [ 0.241906] pnp 00:00: [mem 0x000e4000-0x000e7fff]
    [ 0.241910] pnp 00:00: [mem 0x000e8000-0x000ebfff]
    [ 0.241914] pnp 00:00: [mem 0x000ec000-0x000effff]
    [ 0.241918] pnp 00:00: [mem 0x000f0000-0x000fffff]
    [ 0.241922] pnp 00:00: [mem 0x00100000-0xbeffffff]
    [ 0.241926] pnp 00:00: [mem 0xfec00000-0xfed3ffff]
    [ 0.241930] pnp 00:00: [mem 0xfed4c000-0xffffffff]
    [ 0.242062] system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved
    [ 0.242068] system 00:00: [mem 0x000c0000-0x000c3fff] could not be reserved
    [ 0.242073] system 00:00: [mem 0x000c4000-0x000c7fff] could not be reserved
    [ 0.242078] system 00:00: [mem 0x000c8000-0x000cbfff] has been reserved
    [ 0.242083] system 00:00: [mem 0x000cc000-0x000cffff] has been reserved
    [ 0.242088] system 00:00: [mem 0x000d0000-0x000d3fff] could not be reserved
    [ 0.242093] system 00:00: [mem 0x000e0000-0x000e3fff] could not be reserved
    [ 0.242098] system 00:00: [mem 0x000e4000-0x000e7fff] could not be reserved
    [ 0.242103] system 00:00: [mem 0x000e8000-0x000ebfff] could not be reserved
    [ 0.242108] system 00:00: [mem 0x000ec000-0x000effff] could not be reserved
    [ 0.242113] system 00:00: [mem 0x000f0000-0x000fffff] could not be reserved
    [ 0.242118] system 00:00: [mem 0x00100000-0xbeffffff] could not be reserved
    [ 0.242124] system 00:00: [mem 0xfec00000-0xfed3ffff] could not be reserved
    [ 0.242129] system 00:00: [mem 0xfed4c000-0xffffffff] could not be reserved
    [ 0.242138] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
    [ 0.242179] pnp 00:01: [bus 00-ff]
    [ 0.242184] pnp 00:01: [io 0x0cf8-0x0cff]
    [ 0.242188] pnp 00:01: [io 0x0000-0x0cf7 window]
    [ 0.242193] pnp 00:01: [io 0x0d00-0xffff window]
    [ 0.242197] pnp 00:01: [mem 0x000a0000-0x000bffff window]
    [ 0.242202] pnp 00:01: [mem 0x000c0000-0x000c3fff window]
    [ 0.242206] pnp 00:01: [mem 0x000c4000-0x000c7fff window]
    [ 0.242211] pnp 00:01: [mem 0x000c8000-0x000cbfff window]
    [ 0.242215] pnp 00:01: [mem 0x000cc000-0x000cffff window]
    [ 0.242219] pnp 00:01: [mem 0x000d0000-0x000d3fff window]
    [ 0.242223] pnp 00:01: [mem 0x000d4000-0x000d7fff window]
    [ 0.242227] pnp 00:01: [mem 0x000d8000-0x000dbfff window]
    [ 0.242232] pnp 00:01: [mem 0x000dc000-0x000dffff window]
    [ 0.242236] pnp 00:01: [mem 0x000e0000-0x000e3fff window]
    [ 0.242240] pnp 00:01: [mem 0x000e4000-0x000e7fff window]
    [ 0.242244] pnp 00:01: [mem 0x000e8000-0x000ebfff window]
    [ 0.242248] pnp 00:01: [mem 0x000ec000-0x000effff window]
    [ 0.242253] pnp 00:01: [mem 0xbf000000-0xfebfffff window]
    [ 0.242257] pnp 00:01: [mem 0xfed40000-0xfed4bfff window]
    [ 0.242329] pnp 00:01: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
    [ 0.242400] pnp 00:02: [io 0x0010-0x001f]
    [ 0.242405] pnp 00:02: [io 0x0090-0x009f]
    [ 0.242409] pnp 00:02: [io 0x0024-0x0025]
    [ 0.242413] pnp 00:02: [io 0x0028-0x0029]
    [ 0.242417] pnp 00:02: [io 0x002c-0x002d]
    [ 0.242421] pnp 00:02: [io 0x0030-0x0031]
    [ 0.242424] pnp 00:02: [io 0x0034-0x0035]
    [ 0.242428] pnp 00:02: [io 0x0038-0x0039]
    [ 0.242432] pnp 00:02: [io 0x003c-0x003d]
    [ 0.242441] pnp 00:02: [io 0x00a4-0x00a5]
    [ 0.242445] pnp 00:02: [io 0x00a8-0x00a9]
    [ 0.242449] pnp 00:02: [io 0x00ac-0x00ad]
    [ 0.242452] pnp 00:02: [io 0x00b0-0x00b5]
    [ 0.242456] pnp 00:02: [io 0x00b8-0x00b9]
    [ 0.242460] pnp 00:02: [io 0x00bc-0x00bd]
    [ 0.242464] pnp 00:02: [io 0x0050-0x0053]
    [ 0.242468] pnp 00:02: [io 0x0072-0x0077]
    [ 0.242472] pnp 00:02: [io 0x164e-0x164f]
    [ 0.242476] pnp 00:02: [io 0x002e-0x002f]
    [ 0.242479] pnp 00:02: [io 0x1000-0x107f]
    [ 0.242483] pnp 00:02: [io 0x1180-0x11bf]
    [ 0.242487] pnp 00:02: [io 0x0800-0x080f]
    [ 0.242491] pnp 00:02: [io 0x15e0-0x15ef]
    [ 0.242495] pnp 00:02: [io 0x1600-0x165f]
    [ 0.242499] pnp 00:02: [mem 0xf0000000-0xf3ffffff]
    [ 0.242503] pnp 00:02: [mem 0xfed1c000-0xfed1ffff]
    [ 0.242507] pnp 00:02: [mem 0xfed14000-0xfed17fff]
    [ 0.242511] pnp 00:02: [mem 0xfed18000-0xfed18fff]
    [ 0.242515] pnp 00:02: [mem 0xfed19000-0xfed19fff]
    [ 0.242519] pnp 00:02: [mem 0xfed45000-0xfed4bfff]
    [ 0.242663] system 00:02: [io 0x164e-0x164f] has been reserved
    [ 0.242668] system 00:02: [io 0x1000-0x107f] has been reserved
    [ 0.242674] system 00:02: [io 0x1180-0x11bf] has been reserved
    [ 0.242679] system 00:02: [io 0x0800-0x080f] has been reserved
    [ 0.242684] system 00:02: [io 0x15e0-0x15ef] has been reserved
    [ 0.242689] system 00:02: [io 0x1600-0x165f] could not be reserved
    [ 0.242695] system 00:02: [mem 0xf0000000-0xf3ffffff] has been reserved
    [ 0.242700] system 00:02: [mem 0xfed1c000-0xfed1ffff] has been reserved
    [ 0.242706] system 00:02: [mem 0xfed14000-0xfed17fff] has been reserved
    [ 0.242711] system 00:02: [mem 0xfed18000-0xfed18fff] has been reserved
    [ 0.242716] system 00:02: [mem 0xfed19000-0xfed19fff] has been reserved
    [ 0.242721] system 00:02: [mem 0xfed45000-0xfed4bfff] has been reserved
    [ 0.242728] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.242791] pnp 00:03: [mem 0xfed00000-0xfed003ff]
    [ 0.242838] pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active)
    [ 0.242855] pnp 00:04: [io 0x0000-0x000f]
    [ 0.242859] pnp 00:04: [io 0x0080-0x008f]
    [ 0.242863] pnp 00:04: [io 0x00c0-0x00df]
    [ 0.242868] pnp 00:04: [dma 4]
    [ 0.242913] pnp 00:04: Plug and Play ACPI device, IDs PNP0200 (active)
    [ 0.242927] pnp 00:05: [io 0x0061]
    [ 0.242969] pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active)
    [ 0.242984] pnp 00:06: [io 0x00f0]
    [ 0.243003] pnp 00:06: [irq 13]
    [ 0.243052] pnp 00:06: Plug and Play ACPI device, IDs PNP0c04 (active)
    [ 0.243068] pnp 00:07: [io 0x0070-0x0071]
    [ 0.243078] pnp 00:07: [irq 8]
    [ 0.243119] pnp 00:07: Plug and Play ACPI device, IDs PNP0b00 (active)
    [ 0.243135] pnp 00:08: [io 0x0060]
    [ 0.243140] pnp 00:08: [io 0x0064]
    [ 0.243149] pnp 00:08: [irq 1]
    [ 0.243194] pnp 00:08: Plug and Play ACPI device, IDs PNP0303 (active)
    [ 0.243215] pnp 00:09: [irq 12]
    [ 0.243258] pnp 00:09: Plug and Play ACPI device, IDs IBM0057 PNP0f13 (active)
    [ 0.243896] pnp 00:0a: [mem 0xfed40000-0xfed44fff]
    [ 0.243949] pnp 00:0a: Plug and Play ACPI device, IDs ATM1200 PNP0c31 (active)
    [ 0.244685] pnp: PnP ACPI: found 11 devices
    [ 0.244689] ACPI: ACPI bus type pnp unregistered
    [ 0.253426] pci 0000:00:1c.0: PCI bridge to [bus 02]
    [ 0.253435] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]
    [ 0.253445] pci 0000:00:1c.0: bridge window [mem 0xfc000000-0xfdffffff]
    [ 0.253454] pci 0000:00:1c.0: bridge window [mem 0xf8000000-0xf80fffff 64bit pref]
    [ 0.253466] pci 0000:00:1c.1: PCI bridge to [bus 03]
    [ 0.253472] pci 0000:00:1c.1: bridge window [io 0x3000-0x3fff]
    [ 0.253481] pci 0000:00:1c.1: bridge window [mem 0xdc000000-0xdf3fffff]
    [ 0.253490] pci 0000:00:1c.1: bridge window [mem 0xdfe00000-0xdfefffff 64bit pref]
    [ 0.253501] pci 0000:00:1c.2: PCI bridge to [bus 04]
    [ 0.253507] pci 0000:00:1c.2: bridge window [io 0x4000-0x4fff]
    [ 0.253517] pci 0000:00:1c.2: bridge window [mem 0xd8000000-0xd9ffffff]
    [ 0.253525] pci 0000:00:1c.2: bridge window [mem 0xdfb00000-0xdfbfffff 64bit pref]
    [ 0.253537] pci 0000:00:1c.3: PCI bridge to [bus 05-0c]
    [ 0.253543] pci 0000:00:1c.3: bridge window [io 0x5000-0x5fff]
    [ 0.253552] pci 0000:00:1c.3: bridge window [mem 0xd4000000-0xd5ffffff]
    [ 0.253560] pci 0000:00:1c.3: bridge window [mem 0xdf800000-0xdf8fffff 64bit pref]
    [ 0.253572] pci 0000:00:1c.4: PCI bridge to [bus 0d-14]
    [ 0.253578] pci 0000:00:1c.4: bridge window [io 0x6000-0x6fff]
    [ 0.253587] pci 0000:00:1c.4: bridge window [mem 0xd0000000-0xd1ffffff]
    [ 0.253595] pci 0000:00:1c.4: bridge window [mem 0xdf500000-0xdf5fffff 64bit pref]
    [ 0.253611] pci 0000:15:00.0: res[15]=[mem 0x04000000-0x03ffffff pref] get_res_add_size add_size 4000000
    [ 0.253616] pci 0000:15:00.0: res[16]=[mem 0x04000000-0x03ffffff] get_res_add_size add_size 4000000
    [ 0.253621] pci 0000:15:00.0: res[13]=[io 0x0100-0x00ff] get_res_add_size add_size 100
    [ 0.253626] pci 0000:15:00.0: res[14]=[io 0x0100-0x00ff] get_res_add_size add_size 100
    [ 0.253634] pci 0000:15:00.0: BAR 15: assigned [mem 0xf4000000-0xf7ffffff pref]
    [ 0.253642] pci 0000:15:00.0: BAR 16: assigned [mem 0xc0000000-0xc3ffffff]
    [ 0.253647] pci 0000:15:00.0: BAR 13: assigned [io 0x7000-0x70ff]
    [ 0.253652] pci 0000:15:00.0: BAR 14: assigned [io 0x7400-0x74ff]
    [ 0.253657] pci 0000:15:00.0: CardBus bridge to [bus 16-17]
    [ 0.253661] pci 0000:15:00.0: bridge window [io 0x7000-0x70ff]
    [ 0.253670] pci 0000:15:00.0: bridge window [io 0x7400-0x74ff]
    [ 0.253679] pci 0000:15:00.0: bridge window [mem 0xf4000000-0xf7ffffff pref]
    [ 0.253688] pci 0000:15:00.0: bridge window [mem 0xc0000000-0xc3ffffff]
    [ 0.253697] pci 0000:00:1e.0: PCI bridge to [bus 15-18]
    [ 0.253703] pci 0000:00:1e.0: bridge window [io 0x7000-0xafff]
    [ 0.253713] pci 0000:00:1e.0: bridge window [mem 0xf8300000-0xfbffffff]
    [ 0.253721] pci 0000:00:1e.0: bridge window [mem 0xf4000000-0xf7ffffff 64bit pref]
    [ 0.253801] pci 0000:00:1e.0: enabling device (0005 -> 0007)
    [ 0.253811] pci 0000:00:1e.0: setting latency timer to 64
    [ 0.253834] pci 0000:15:00.0: setting latency timer to 64
    [ 0.253842] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
    [ 0.253847] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
    [ 0.253851] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
    [ 0.253856] pci_bus 0000:00: resource 7 [mem 0x000d4000-0x000d7fff]
    [ 0.253860] pci_bus 0000:00: resource 8 [mem 0x000d8000-0x000dbfff]
    [ 0.253864] pci_bus 0000:00: resource 9 [mem 0x000dc000-0x000dffff]
    [ 0.253869] pci_bus 0000:00: resource 10 [mem 0xbf000000-0xfebfffff]
    [ 0.253873] pci_bus 0000:00: resource 11 [mem 0xfed40000-0xfed4bfff]
    [ 0.253877] pci_bus 0000:02: resource 0 [io 0x2000-0x2fff]
    [ 0.253882] pci_bus 0000:02: resource 1 [mem 0xfc000000-0xfdffffff]
    [ 0.253886] pci_bus 0000:02: resource 2 [mem 0xf8000000-0xf80fffff 64bit pref]
    [ 0.253891] pci_bus 0000:03: resource 0 [io 0x3000-0x3fff]
    [ 0.253895] pci_bus 0000:03: resource 1 [mem 0xdc000000-0xdf3fffff]
    [ 0.253900] pci_bus 0000:03: resource 2 [mem 0xdfe00000-0xdfefffff 64bit pref]
    [ 0.253904] pci_bus 0000:04: resource 0 [io 0x4000-0x4fff]
    [ 0.253908] pci_bus 0000:04: resource 1 [mem 0xd8000000-0xd9ffffff]
    [ 0.253913] pci_bus 0000:04: resource 2 [mem 0xdfb00000-0xdfbfffff 64bit pref]
    [ 0.253917] pci_bus 0000:05: resource 0 [io 0x5000-0x5fff]
    [ 0.253921] pci_bus 0000:05: resource 1 [mem 0xd4000000-0xd5ffffff]
    [ 0.253926] pci_bus 0000:05: resource 2 [mem 0xdf800000-0xdf8fffff 64bit pref]
    [ 0.253930] pci_bus 0000:0d: resource 0 [io 0x6000-0x6fff]
    [ 0.253935] pci_bus 0000:0d: resource 1 [mem 0xd0000000-0xd1ffffff]
    [ 0.253939] pci_bus 0000:0d: resource 2 [mem 0xdf500000-0xdf5fffff 64bit pref]
    [ 0.253943] pci_bus 0000:15: resource 0 [io 0x7000-0xafff]
    [ 0.253948] pci_bus 0000:15: resource 1 [mem 0xf8300000-0xfbffffff]
    [ 0.253952] pci_bus 0000:15: resource 2 [mem 0xf4000000-0xf7ffffff 64bit pref]
    [ 0.253956] pci_bus 0000:15: resource 4 [io 0x0000-0x0cf7]
    [ 0.253961] pci_bus 0000:15: resource 5 [io 0x0d00-0xffff]
    [ 0.253965] pci_bus 0000:15: resource 6 [mem 0x000a0000-0x000bffff]
    [ 0.253969] pci_bus 0000:15: resource 7 [mem 0x000d4000-0x000d7fff]
    [ 0.253973] pci_bus 0000:15: resource 8 [mem 0x000d8000-0x000dbfff]
    [ 0.253978] pci_bus 0000:15: resource 9 [mem 0x000dc000-0x000dffff]
    [ 0.253982] pci_bus 0000:15: resource 10 [mem 0xbf000000-0xfebfffff]
    [ 0.253986] pci_bus 0000:15: resource 11 [mem 0xfed40000-0xfed4bfff]
    [ 0.253991] pci_bus 0000:16: resource 0 [io 0x7000-0x70ff]
    [ 0.253995] pci_bus 0000:16: resource 1 [io 0x7400-0x74ff]
    [ 0.253999] pci_bus 0000:16: resource 2 [mem 0xf4000000-0xf7ffffff pref]
    [ 0.254004] pci_bus 0000:16: resource 3 [mem 0xc0000000-0xc3ffffff]
    [ 0.254070] NET: Registered protocol family 2
    [ 0.255457] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
    [ 0.261656] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
    [ 0.262461] TCP: Hash tables configured (established 524288 bind 65536)
    [ 0.262588] TCP: reno registered
    [ 0.262605] UDP hash table entries: 2048 (order: 4, 65536 bytes)
    [ 0.262669] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
    [ 0.262858] NET: Registered protocol family 1
    [ 0.262887] pci 0000:00:02.0: Boot video device
    [ 0.262954] pci 0000:00:1a.1: power state changed by ACPI to D0
    [ 0.263064] pci 0000:00:1d.0: power state changed by ACPI to D0
    [ 0.263144] pci 0000:00:1d.2: power state changed by ACPI to D0
    [ 0.263269] PCI: CLS 64 bytes, default 64
    [ 0.263404] Unpacking initramfs...
    [ 0.381385] Freeing initrd memory: 3008k freed
    [ 0.383142] Simple Boot Flag at 0x35 set to 0x1
    [ 0.383770] audit: initializing netlink socket (disabled)
    [ 0.383796] type=2000 audit(1360598852.383:1): initialized
    [ 0.406333] HugeTLB registered 2 MB page size, pre-allocated 0 pages
    [ 0.409592] VFS: Disk quotas dquot_6.5.2
    [ 0.409682] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
    [ 0.410020] msgmni has been set to 5973
    [ 0.410394] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
    [ 0.410438] io scheduler noop registered
    [ 0.410442] io scheduler deadline registered
    [ 0.410500] io scheduler cfq registered (default)
    [ 0.410773] pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X
    [ 0.411021] pcieport 0000:00:1c.1: irq 41 for MSI/MSI-X
    [ 0.411259] pcieport 0000:00:1c.2: irq 42 for MSI/MSI-X
    [ 0.411502] pcieport 0000:00:1c.3: irq 43 for MSI/MSI-X
    [ 0.411743] pcieport 0000:00:1c.4: irq 44 for MSI/MSI-X
    [ 0.411960] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
    [ 0.411970] pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
    [ 0.412008] pcieport 0000:00:1c.1: Signaling PME through PCIe PME interrupt
    [ 0.412012] pci 0000:03:00.0: Signaling PME through PCIe PME interrupt
    [ 0.412021] pcie_pme 0000:00:1c.1:pcie01: service driver pcie_pme loaded
    [ 0.412055] pcieport 0000:00:1c.2: Signaling PME through PCIe PME interrupt
    [ 0.412063] pcie_pme 0000:00:1c.2:pcie01: service driver pcie_pme loaded
    [ 0.412096] pcieport 0000:00:1c.3: Signaling PME through PCIe PME interrupt
    [ 0.412105] pcie_pme 0000:00:1c.3:pcie01: service driver pcie_pme loaded
    [ 0.412144] pcieport 0000:00:1c.4: Signaling PME through PCIe PME interrupt
    [ 0.412152] pcie_pme 0000:00:1c.4:pcie01: service driver pcie_pme loaded
    [ 0.412275] vesafb: mode is 1280x800x32, linelength=5120, pages=0
    [ 0.412278] vesafb: scrolling: redraw
    [ 0.412282] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
    [ 0.413060] vesafb: framebuffer at 0xe0000000, mapped to 0xffffc90005000000, using 4032k, total 4032k
    [ 0.470284] Console: switching to colour frame buffer device 160x50
    [ 0.527327] fb0: VESA VGA frame buffer device
    [ 0.527346] intel_idle: does not run on family 6 model 15
    [ 0.527398] GHES: HEST is not enabled!
    [ 0.527510] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
    [ 0.528201] Linux agpgart interface v0.103
    [ 0.528345] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
    [ 0.535966] serio: i8042 KBD port at 0x60,0x64 irq 1
    [ 0.536026] serio: i8042 AUX port at 0x60,0x64 irq 12
    [ 0.536202] mousedev: PS/2 mouse device common for all mice
    [ 0.536311] rtc_cmos 00:07: RTC can wake from S4
    [ 0.536519] rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0
    [ 0.536558] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
    [ 0.536573] cpuidle: using governor ladder
    [ 0.536576] cpuidle: using governor menu
    [ 0.536664] drop_monitor: Initializing network drop monitor service
    [ 0.536802] TCP: cubic registered
    [ 0.537011] NET: Registered protocol family 10
    [ 0.537302] NET: Registered protocol family 17
    [ 0.537323] Key type dns_resolver registered
    [ 0.537728] PM:

    The bug is known, and a patch has been submitted: https://bugs.freedesktop.org/show_bug.cgi?id=80151. There's been no update since friday, so I wonder what the current status is, or if it's up for review at all.
    Does anyone know how we can be notified when this patch hits the kernel?

  • Multiple iMac display failures

    Hi there, my late 2009 27" iMac has had two display failures since I purchased it.  The most recent replacement was done by Apple in Nov 2012 while still under Apple Care.  It is currently in need of a third display (the replacement one has failed after 23 months), is this normal for this product that will be five years old next month?  Or do I have something else that is the issue or perhaps a lemon product?

    That a UPS unit would have prevented your logic board failures. Properly designed power supplies do not need a UPS unit in this country. In some third world countries where the power is unreliable on a daily basis with large power swings, they are a must have.
    In my opinion, the G5 iMac's were a poor design with inadequate heat dissipation, weak power supplies and logic boards. Most of them ran for years, but an inordinate number of them had multiple failures. The new aluminum models are a much better design with most of the high heat components located at the top of the machine.
    I had no hardware problems with my eight year old Dell...but I'm still sticking with Apple because of their superior software performance.
    Good luck with what ever you decide...virg

  • External Hard Drive Failures after iMac internal drive replaced

    I was one of those lucky ppl who had to have my internal 1TB Seagate HDD replaced due to the recall. It was replaced on Friday.
    After the drive was replaced (with another Seagate, ***?), I cloned my previous system back to the new drive (restoring from Time Machine required me to re-download Lion, which required me to re-download to a newer version of Snow Leopard, and just, Oi, vey, I used my clone).
    I then had to create another bootcamp partition, and after that, I restored my previous bootcamp from an image backup with Winclone.
    The next morning, my Time Machine external backup drive (a Maxtor OneTouch) makes horrible fluttering and crunching noises and cannot be found via disk utility, certainly doesn't mount to the desktop. I figure it just coincidentally failed and attached a new drive (a different OneTouch) for backup.
    While Time Machine is performing an initial backup to this new drive (will take 10 hrs), I try to move a few media files to another external media drive (LaCie 1TB). I receive a couple of error -36s on a few particular files, so I figure I should wait for the Time Machine to backup and then diagnose the media drive.
    The next morning (after 10 hr backup is finished), I have a stop-sign error that a disk was unmounted improperly (the LaCie media drive). The drive cannot be seen in disk utility or on a completely different MBP running Snow Leopard. It's spinning up, but it can't be read.
    Only thing I can think to do is reinstall 10.8.2 over top the cloned system, make sure that the recovery partition was recreated and working.
    This can't be a coinicidence, right? At this point, I'm afraid to keep my external storage drives and clone attached to the iMac, but I'm afraid to not have TM drive attached. Anyone know where to start diagnosing the problem?
    1. Could a new internal drive be the problem, hardware wise?
    2. Could the lack of an initial recovery partition or the setting up of a bootcamp partition have these sorts of consequences?
    3. Could the problem be from restoring a clone?

    Well, it is a LaCie-packaged adapter, some version of that model. The hub is on the mac mini inspired line of LaCie HDs (http://www.lacie.com/company/news/news.htm?id=10269). I've had it for 6 yrs, and the hub is still going. Other drives have been running from the hub without issue for all that time (and still are). There is no hissing, and the display light indicates the hub is getting power.
    You think it's time for a new hub?
    The internal switchout is just a coincidence?
    (Basically, I'm not a hardware expert. Does anyone know if an internal drive or internal sensor/connection problem can cause externals to fail or blowout a controller? I'm waiting on a drive dock to arrive—I'll know more whether these are HD failures or chip failures after that. Both drives showed normal-seeming power use via their display lights.)

  • MBP 2012 still slow after clean install of Yosemite

    Hello,
    I'm hoping someone can help me, I've done just about everything I can find online to get my MBP to work like it used to. After unsuccessful attempts at different workarounds, I decided to wipe everything perform a clean install of Yosemite.
    Still no luck!! #nobueno
    Problem description:
    After clean install of Yosemite, my MacBook Pro (2012) continues to run at a snailspace. Very slow!
    EtreCheck version: 2.1.8 (121)
    Report generated February 18, 2015 at 11:51:42 AM PST
    Download EtreCheck from http://etresoft.com/etrecheck
    Click the [Click for support] links for help with non-Apple products.
    Click the [Click for details] links for more information about that line.
    Hardware Information: ℹ️
        MacBook Pro (13-inch, Mid 2012) (Technical Specifications)
        MacBook Pro - model: MacBookPro9,2
        1 2.9 GHz Intel Core i7 CPU: 2-core
        8 GB RAM Upgradeable
            BANK 0/DIMM0
                4 GB DDR3 1600 MHz ok
            BANK 1/DIMM0
                4 GB DDR3 1600 MHz ok
        Bluetooth: Good - Handoff/Airdrop2 supported
        Wireless:  en1: 802.11 a/b/g/n
        Battery Health: Normal - Cycle count 294
    Video Information: ℹ️
        Intel HD Graphics 4000
            Color LCD 1280 x 800
    System Software: ℹ️
        OS X 10.10.2 (14C109) - Time since boot: 1:41:54
    Disk Information: ℹ️
        TOSHIBA MK7559GSXF disk0 : (750.16 GB)
            EFI (disk0s1) <not mounted> : 210 MB
            Recovery HD (disk0s3) <not mounted>  [Recovery]: 650 MB
            Macintosh HD (disk1) / : 748.93 GB (735.33 GB free)
                Core Storage: disk0s2 749.30 GB Online
        MATSHITADVD-R   UJ-8A8 
    USB Information: ℹ️
        Apple Inc. FaceTime HD Camera (Built-in)
        Apple Inc. Apple Internal Keyboard / Trackpad
        Apple Computer, Inc. IR Receiver
        Apple Inc. BRCM20702 Hub
            Apple Inc. Bluetooth USB Host Controller
    Thunderbolt Information: ℹ️
        Apple Inc. thunderbolt_bus
    Gatekeeper: ℹ️
        Mac App Store and identified developers
    User Login Items: ℹ️
        None
    Internet Plug-ins: ℹ️
        Default Browser: Version: 600 - SDK 10.10
        QuickTime Plugin: Version: 7.7.3
    3rd Party Preference Panes: ℹ️
        None
    Time Machine: ℹ️
        Time Machine not configured!
    Top Processes by CPU: ℹ️
             4%    WindowServer
             1%    Finder
             1%    mds
             1%    mds_stores
             0%    deleted
    Top Processes by Memory: ℹ️
        163 MB    mds_stores
        86 MB    com.apple.WebKit.WebContent
        77 MB    Finder
        69 MB    WindowServer
        52 MB    mds
    Virtual Memory Information: ℹ️
        4.90 GB    Free RAM
        1.86 GB    Active RAM
        868 MB    Inactive RAM
        954 MB    Wired RAM
        2.28 GB    Page-ins
        0 B    Page-outs
    Diagnostics Information: ℹ️
        Feb 18, 2015, 10:03:37 AM    Self test - passed
        Feb 18, 2015, 09:55:07 AM    /Library/Logs/DiagnosticReports/mbpluginhost_2015-02-18-095507_[redacted].crash

    1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
    The test works on OS X 10.7 ("Lion") and later. I don't recommend running it on older versions of OS X. It will do no harm, but it won't do much good either.
    Don't be put off by the complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
    2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
    There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
    3. Below are instructions to run a UNIX shell script, a type of program. As I wrote above, it changes nothing. It doesn't send or receive any data on the network. All it does is to generate a human-readable report on the state of the computer. That report goes nowhere unless you choose to share it. If you prefer, you can act on it yourself without disclosing the contents to me or anyone else.
    You should be wondering whether you can believe me, and whether it's safe to run a program at the behest of a stranger. In general, no, it's not safe and I don't encourage it.
    In this case, however, there are a couple of ways for you to decide whether the program is safe without having to trust me. First, you can read it. Unlike an application that you download and click to run, it's transparent, so anyone with the necessary skill can verify what it does.
    You may not be able to understand the script yourself. But variations of it have been posted on this website thousands of times over a period of years. The site is hosted by Apple, which does not allow it to be used to distribute harmful software. Any one of the millions of registered users could have read the script and raised the alarm if it was harmful. Then I would not be here now and you would not be reading this message. See, for example, this discussion.
    Nevertheless, if you can't satisfy yourself that these instructions are safe, don't follow them. Ask for other options.
    4. Here's a summary of what you need to do, if you choose to proceed:
    ☞ Copy a line of text in this window to the Clipboard.
    ☞ Paste into the window of another application.
    ☞ Wait for the test to run. It usually takes a few minutes.
    ☞ Paste the results, which will have been copied automatically, back into a reply on this page.
    The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
    5. Try to test under conditions that reproduce the problem, as far as possible. For example, if the computer is sometimes, but not always, slow, run the test during a slowdown.
    You may have started up in "safe" mode. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
    6. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
    7. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
    Triple-click anywhere in the line of text below on this page to select it:
    PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(1248 ' 0.5 0.25 10 1000 15 5120 1000 25000 1 1 0 100 ' 51 25600 4 10 25 5120 102400 1000 25 1000 150 40 500 300 85 25 20480 262144 20 2000 524288 604800 5 );k=({Soft,Hard}ware Memory Diagnostics Power FireWire Thunderbolt USB Bluetooth SerialATA Extensions Applications Frameworks PrefPane Fonts Displays PCI UniversalAccess InstallHistory ConfigurationProfile AirPort 'com\.apple\.' -\\t N\\/A 'AES|atr|udit|msa|dnse|ax|ensh|fami|FileS|fing|ft[pw]|gedC|kdu|etS|is\.|alk|ODSA|otp|htt|pcas|ps-lp|rexe|rlo|rsh|smb|snm|teln|upd-[aw]|uuc|vix|webf' OSBundle{Require,AllowUserLoa}d 'Mb/s:per sec:ms/s:KiB/s:%:total:MB:total' 'Net in:Net out:I/O wait time:I/O requests:CPU usage:Open files:Memory:Mach ports:File opens:Forks:Failed forks:System errors' 'tsA|[ST]M[HL]' PlistBuddy{,' 2>&1'}' -c Print' 'Info\.plist' CFBundleIdentifier );f=('\n%s'{': ','\n\n'}'%s\n' '\nRAM details\n%s\n' %s{' ','\n'{"${k[22]}",}}'%s\n' '%d MB: %s\n' '\n    ...and %s more line(s)\n' '\nContents of %s\n    '"${k[22]}"'mod date: %s\n    '"${k[22]}"'checksum: %s\n%s\n' );c=(879294308 4071182229 461455494 3627668074 1083382502 1274181950 1855907737 2758863019 1848501757 464843899 2636415542 3694147963 1233118628 2456546649 2806998573 2778718105 842973933 2051385900 3301885676 891055588 998894468 695903914 1443423563 4136085286 3374894509 1051159591 892310726 1707497389 523110921 2883943871 3873345487 );s=(' s/[0-9A-Za-z._]+@[0-9A-Za-z.]+\.[0-9A-Za-z]{2,4}/EMAIL/g;/faceb/s/(at\.)[^.]+/\1NAME/g;/\/Shared/!s/(\/Users\/)[^ /]+/\1USER/g;s/[-0-9A-Fa-f]{22,}/UUID/g;' ' s/^ +//;/de: S|[nst]:/p;' ' {sub(/^ +/,"")};/er:/;/y:/&&$2<'${p[4]} ' s/:$//;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: (E[^m]|[^EO])|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[9]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Genesy|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' BEGIN { FS=":";if(system("sw_vers -productVersion|grep -q ^10\.1")) d="^'"${k[21]}"'launch(d\.peruser\.[0-9]+|ctl\.(Aqua|Background|System))$";} { if($2~/[1-9]/) { $2="status: "$2;printf("'"${f[4]}"'",$1,$2);} else if(!d||$1!~d) print $1;} ' ' { sub(/ :/,"");print|"tail -n'${p[10]}'";} ' ' NR==2&&$4<='${p[7]}' { print $4;} ' ' ($1~"wir"&&$2>'${p[22]}')||($1~/P.+ts:/&&$2>'${p[19]}') { print $1" "int($2);} ' '/YLD/s/=/ /p' ' { q=$1;$1="";u=$NF;$NF="";gsub(/ +$/,"");print q":"$0":"u;} ' ' /^ {6}[^ ]/d;s/:$//;/([^ey]|[^n]e):/d;/e: Y/d;s/: Y.+//g;H;${ g;s/ \n (\n)/\1/g;s/\n +(M[^ ]+)[ -~]+/ (\1)/;s/\n$//;/( {8}[^ ].*){2,}/p;} ' 's:^:/:p;' ' !/, .+:/{print};END{if(NR<'{${p[12]},${p[13]}}')printf("^'"${k[21]}"'.+")} ' '|uniq' ' 1;END { print "/L.+/Scr.+/Templ.+\.app$";print "/L.+/Pri.+\.plugin$";if(NR<'{${p[14]},${p[21]}}') print "^/[Sp].+|'${k[21]}'";} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:.+//p;' '&&echo On' '/\.(bundle|component|framework|kext|mdimporter|plugin|qlgenerator|saver|wdgt)$/p' '/\.dylib$/p' ' /Temp|emac/{next};/(etc|Preferences|Launch[AD].+)\// { sub(".","");print $0"$";} END { split("'"${c[*]}"'",c);for(i in c) print "\t"c[i]"$";} ' ' /^\/(Ap|Dev|Inc|Prev)/d;/((iTu|ok).+dle|\.(component|mailbundle|mdimporter|plugin|qlgenerator|saver|wdgt))$/p;' ' BEGIN{ FS="= "} $2 { gsub(/[()"]/,"",$2);print $2;} ' ' /^\//!d;s/^.{5}//;s/ [^/]+\//: \//p;' '>&-||echo No' '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[2]}'{$2=$2-1;print}' ' BEGIN { M1='${p[16]}';M2='${p[18]}';M3='${p[8]}';M4='${p[3]}';} !/^A/{next};/%/ { getline;if($5<M1) o["CPU"]="CPU: user "$2"%, system "$4"%";next;} $2~/^disk/&&$4>M2 { o[$2]=$2": "$3" ops/s, "$4" blocks/s";next;} $2~/^(en[0-9]|bridg)/ { if(o[$2]) { e=$3+$4+$5+$6;if(e) o[$2]=o[$2]"; errors "e"/s";next;};if($4>M3||$6>M4) o[$2]=$2": in "int($4/1024)", out "int($6/1024)" (KiB/s)";} END { for(i in o) print o[i];} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|BKAg|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/)||(/v6:/&&$2!~/A/) ' ' BEGIN{FS=": "} /^ {10}O/ {exit} /^ {0,12}[^ ]/ {next} $1~"Ne"&&$2!~/^In/{print} $1~"Si" { split($2,a," ");if(a[1]-a[4]<'${p[5]}') print;};$1~"T"&&$2<'${p[20]}'{print};$1~"Se"&&$2!~"2"{print};' ' BEGIN { FS=":";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]$1;} ' ' BEGIN { split("'"${p[1]}"'",m);FS=":";} $2<=m[$1]{next} $1<9 { o[$1]=o[$1]"\n    "$3" (UID "$4"): "$2;} $1==9&&$5!~"^/dev" { o[$1]=o[$1]"\n    "$3" (UID "$4") => "$5" (status "$6"): "$2;} $1==10&&$5 { p="ps -c -ocomm -p"$5"|sed 1d";p|getline n;close(p);if(n) $5=n;o[$1]=o[$1]"\n    "$5" => "$3" (UID "$4"): "$2;} $1~/1[12]/ { o[$1]=o[$1]"\n    "$3" (UID "$4", error "$5"): "$2;} END { n=split("'"${k[27]}"'",u,":");for(i=n+1;i<n+5;i++)u[i]=u[2];split("'"${k[28]}"'",l,":");for(i in o) print "\n"l[i]" ("u[i]")\n"o[i];} ' ' /^ {8}[^ ]/{print} ' ' BEGIN { L='${p[17]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n    "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n    [N/A]";"cksum "F|getline C;split(C, A);C=A[1];"stat -f%Sm "F|getline D;"file -b "F|getline T;if(T~/^Apple b/) { f="";l=0;while("'"${k[30]}"' "F|getline g) { l++;if(l<=L) f=f"\n    "g;};};if(T!~/^(AS.+ (En.+ )?text(, with v.+)?$|(Bo|PO).+ sh.+ text ex|XM)/) F=F"\n    '"${k[22]}"'"T;printf("'"${f[8]}"'",F,D,C,f);if(l>L) printf("'"${f[7]}"'",l-L);} ' ' s/^ ?n...://p;s/^ ?p...:/-'$'\t''/p;' 's/0/Off/p' 's/^.{52}(.+) <.+/\1/p' ' /id: N|te: Y/{i++} END{print i} ' ' /kext:/ { split($0,a,":");p=a[1];k[S]='${k[25]}';k[U]='${k[26]}';v[S]="Safe";v[U]="true";for(i in k) { s=system("'"${k[30]}"'\\ :"k[i]" \""p"\"/*/I*|grep -qw "v[i]);if(!s) a[1]=a[1]" "i;};if(!a[2]) a[2]="'"${k[23]}"'";printf("'"${f[4]}"'",a[1],a[2]);next;} !/^ *$/ { p="'"${k[31]}"'\\ :'"${k[33]}"' \""$0"\"/*/'${k[32]}'";p|getline b;close(p);if(b~/, .+:/||b=="") b="'"${k[23]}"'";printf("'"${f[4]}"'",$0,b);} ' '/ en/!s/\.//p' ' NR>=13 { gsub(/[^0-9]/,"",$1);print;} ' ' $10~/\(L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9|"sort|uniq";} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?'${k[32]}'$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' ' /l: /{ /DVD/d;s/.+: //;b0'$'\n'' };/s: /{ / [VY]/d;s/^ */- /;H;};$b0'$'\n'' d;:0'$'\n'' x;/APPLE [^:]+$/d;p;' '/^find: /!p;' ' /^p/{ s/.//g;x;s/\nu/:/;s/(\n)c/\1:/;s/\n\n//;p;};H;' ' BEGIN{FS="= "} /Path/{print $2} ' ' /^ *$/d;s/^ */    /;p;' ' s/^.+ |\(.+\)$//g;p;' '1;END{if(NR<'${p[15]}')printf("^/(S|usr/(X|li))")}' ' /2/{print "WARN"};/4/{print "CRITICAL"};' ' /EVHF|MACR|^s/d;s/^.+: //p;' ' $3~/^[1-9][0-9]{0,2}(\.[1-9][0-9]{0,2}){2}$/ { i++;n=n"\n"$1"\t"$3;} END{ if(i>1)print n} ' s/{'\.|jnl: ','P.+:'}'//;s/ +([0-9]+)(.+)/\2 \1/p' ' /es: ./{ s/^.+://;b0'$'\n'' };/^ +C.+ted: +[NY]/H;/:$/b0'$'\n'' d;:0'$'\n'' x;/: +N/d;s/\n.+//p;' ' 1d;/:$/b0'$'\n'' $b0'$'\n'' /(D|^ *Loc.+): /{ s/^.+: //;H;};/(B2|[my]): /H;d;:0'$'\n'' x;/[my]: [AM]|m: I.+p$|^\/Vo/d;s/(^|\n) [ -~]+//g;s/(.+)\n(.+)/\2:\1/;s/\n//g;/[ -~]/p;' 's/$/:(0|-(4[34])?)$/p' '|sort'{'|uniq'{,\ -c},\ -nr} ' s/^/'{5,6,7,8}':/;s/ *: */:/g;p;' '/e:/{print $2}' ' /^[(]/{ s/....//;s/$/:/;N;/: [)]$/d;s/\n.+ ([^ ]+).$/\1/;H;};${ g;p;} ' 's/:.+$//p' '|wc -l' /{\\.{kext,xpc,'(appex|pluginkit)'}'\/(Contents\/)?'Info,'Launch[AD].+'}'\.plist$/p' 's/([-+.?])/\\\1/g;p' 's/, /\'$'\n/g;p' ' BEGIN{FS=":"} { printf("'"${f[6]}"'",$1/1048576,$2);} ' ' /= D/&&$1!~/'{${k[24]},${k[29]}}'/ { getline d;if(d~"t") D=D"\n"$1;} END { print D;} ' ' NR>1&&$3!~/0x|\.([0-9]{3,}|[-0-9A-F]{36})$/ { print $3":"$2;} ' '|tail -n'${p[6]} ' $1>1 { $NF=$NF" x"$1;} /\*/ { if(!f) f="\n\t* Code injection";} { $1="";} 1;END { print f;} ' ' s/.+bus /Bus: /;s/,.+[(]/ /;s/,.+//p;' ' { $NF=$NF" Errors: "$1;$1="";} 1 ' ' 1s/^/\'$'\n''/;/^ +(([MNPRSV]|De|Li).+|Bus): .|d: Y/d;s/:$//;$d;p;' ' BEGIN { RS=",";FS=":";} $1~"name" { gsub("\"","",$2);print $2;} ' '|grep -q e:/' '/[^ .]/p' '{ print $1}' ' /^ +N.+: [1-9]/ { i++;} END { if(i) print "system: "i;} ' ' NF { print "'{admin,user}' "$NF;exit;} ' ' /se.+ =/,/[\}]/!d;/[=\}]/!p ' ' 3,4d;/^ +D|Of|Fu| [0B]/d;s/^  |:$//g;$!H;${ x;/:/p;} ' ' BEGIN { FS=": ";} NR==1 { sub(":","");h="\n"$1"\n";} /:$/ { l=$1;next;} $1~"S"&&$2!~3 { getline;next;} /^ {6}I/ { i++;L[i]=l" "$2;if(i=='${p[24]}') nextfile;} END { if(i) print h;for(j=0;j<i;j++) print L[i-j];} ' ' /./H;${ x;s/\n//;s/\n/, /g;/,/p;} ' );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps crontab kextfind top pkgutil "${k[30]}\\" echo cksum kextstat launchctl smcDiagnose sysctl\ -n defaults\ read stat lsbom 'mdfind -onlyin' env pluginkit scutil 'dtrace -q -x aggsortrev -n' security sed\ -En awk 'dscl . -read' networksetup mdutil lsof test osascript\ -e netstat mdls route cat );c2=(${k[21]}loginwindow\ LoginHook ' /L*/P*/loginw*' "'tell app \"System Events\" to get properties of login items'" 'L*/Ca*/'${k[21]}'Saf*/E* -d 2 -name '${k[32]} '~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 \)' -i '-nl -print' '-F \$Sender -k Level Nle 3 -k Facility Req "'${k[21]}'('{'bird|.*i?clou','lsu|sha'}')"' "-f'%N: %l' Desktop {/,}L*/Keyc*" therm sysload boot-args status " -F '\$Time \$Message' -k Sender kernel -k Message CRne '0xdc008012|(allow|call)ing|(mplet|nabl)ed|ry HD|safe b|xpm' -k Message CReq 'bad |Can.t l|corru|dead|fail|GPU |hfs: Ru|inval|Limiti|v_c|NVDA[(]|pagin|Purg(ed|in)|error|Refus|TCON|tim(ed? ?|ing )o|trig|WARN' " '-du -n DEV -n EDEV 1 10' 'acrx -o%cpu,comm,ruid' "' syscall::recvfrom:return {@a[execname,uid]=sum(arg0)} syscall::sendto:return {@b[execname,uid]=sum(arg0)} syscall::open*:entry {@c[execname,uid,copyinstr(arg0),errno]=count()} syscall::execve:return, syscall::posix_spawn:return {@d[execname,uid,ppid]=count()} syscall::fork:return, syscall::vfork:return, syscall::posix_spawn:return /arg0<0/ {@e[execname,uid,arg0]=count()} syscall:::return /errno!=0/ {@f[execname,uid,errno]=count()} io:::wait-start {self->t=timestamp} io:::wait-done /self->t/ { this->T=timestamp - self->t;@g[execname,uid]=sum(this->T);self->t=0;} io:::start {@h[execname,uid]=sum(args[0]->b_bcount)} tick-10sec { normalize(@a,2560000);normalize(@b,2560000);normalize(@c,10);normalize(@d,10);normalize(@e,10);normalize(@f,10);normalize(@g,10000000);normalize(@h,10240);printa(\"1:%@d:%s:%d\n\",@a);printa(\"2:%@d:%s:%d\n\",@b);printa(\"9:%@d:%s:%d:%s:%d\n\",@c);printa(\"10:%@d:%s:%d:%d\n\",@d);printa(\"11:%@d:%s:%d:%d\n\",@e);printa(\"12:%@d:%s:%d:%d\n\",@f);printa(\"3:%@d:%s:%d\n\",@g);printa(\"4:%@d:%s:%d\n\",@h);exit(0);} '" '-f -pfc /var/db/r*/'${k[21]}'*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cght] ! -name .?\* ! -name \*ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true \) -execdir stat -f:%Sc:%N -t%F {} \;' '/S*/*/Ca*/*xpc*' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' /\ kMDItemContentTypeTree=${k[21]}{bundle,mach-o-dylib} :Label "/p*/e*/{aut*,{cron,fs}tab,hosts,{[lp],sy}*.conf,mach_i*/*,pam.d/*,ssh{,d}_config,*.local} {/p*,/usr/local}/e*/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t {/S*/,/,}L*/{Lau,Sec}*/*t .launchd.conf" list '-F "" -k Sender hidd -k Nle 3' /Library/Preferences/${k[21]}alf\ globalstate --proxy '-n get default' print\ system --dns -get{dnsservers,info} dump-trust-settings\ {-s,-d,} -n1 '-R -ce -l1 -n5 -o'{'prt -stats prt','mem -stats mem'}',command,uid' -kl -l -s\ / '--regexp --files '${k[21]}'pkg.*' '+c0 -i4TCP:0-1023' ${k[21]}dashboard\ layer-gadgets '-d /L*/Mana*/$USER' '-app Safari WebKitDNSPrefetchingEnabled' '-Fcu +c0 -l' -m 'L*/{Con*/*/Data/L*/,}Pref* -type f -size 0c -name *.plist.???????' kern.memorystatus_vm_pressure_level '3>&1 >&- 2>&3' '-F \$Message -k Sender kernel -k Message CReq "'{'n Cause: -','(a und|I/O |jnl_io.+)err','USBF:.+bus'}'"' -name\ kMDItem${k[33]} -T\ hfs '-n get default' -listnetworkserviceorder :${k[33]} :CFBundleDisplayName $EUID {,'/{S*/,}'}'L*/{,Co*/*/*/L*/}{Cache,Log}s $TMPDIR../C -type f -size +'${p[11]}'M -exec stat -f'%z:%N' {} \;' \ /v*/d*/*/*l*d{,.*.$UID}/* '-app Safari UserStyleSheetEnabled' 'L*/A*/Fi*/P*/*/a*.json' users/$USER\ HomeDirectory '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' ' -F "\$Time \$(Sender): \$Message" -k Level Nle 3 -k Facility R'{'ne "user|','eq "'}'console" -k Message CRne "[{}<>]|commit - no t|deprec|Goog|realp|sandbox ex|/root" ' getenv '/ "kMDItemDateAdded>=\$time.now(-'${p[23]}')&&kMDItem'${k[33]}'=*"' -m\ / '' );N1=${#c2[@]};for j in {0..20};do c2[N1+j]=SP${k[j]}DataType;done;l=({Restricted\ ,Lock,Pro}files POST Battery {Safari,App,{Bad,Loaded}\ kernel,Firefox}\ extensions System\ load boot\ args FileVault\ {2,1} {Kernel,System,Console}\ log Activity SMC Login\ hook 'I/O per process' 'High file counts' UID Daemons Agents XPC\ cache Startup\ items {Admin,Root}\ access Stylesheet Library\ paths{,' ('{shell,launchd}\)} Font\ issues Firewall Proxies DNS TCP/IP Wi-Fi 'Elapsed time (sec)' {Root,User}\ crontab {Global,User}' login items' Spotlight Memory\ pressure Listeners Widgets Parental\ Controls Prefetching Nets Volumes {Continuity,I/O,iCloud,HID,HCI}\ errors {User,System}\ {caches/logs,overrides} Shutdown\ codes Heat Diagnostic\ reports Bad\ plists Free\ space VM Bundles{,' (new)'} Trust\ settings );N3=${#l[@]};for i in {0..8};do l[N3+i]=${k[5+i]};done;F() { local x="${s[$1]}";[[ "$x" =~ ^([\&\|\<\>]|$) ]]&&{ printf "$x";return;};:|${c1[30]} "$x" 2>&-;printf "%s \'%s\'" "|${c1[30+$?]}" "$x";};A0() { Q=6;v[2]=1;id -G|grep -qw 80;v[1]=$?;((v[1]))||{ Q=7;sudo -v;v[2]=$?;((v[2]))||Q=8;};v[3]=`date +%s`;date '+Start time: %T %D%n';printf '\n[Process started]\n\n'>&4;printf 'Revision: %s\n\n' ${p[0]};};A1() { local c="${c1[$1]} ${c2[$2]}";shift 2;c="$c ` while [[ "$1" ]];do F $1;shift;done`";((P2))&&{ c="sudo $c";P2=;};v=`eval "$c"`;[[ "$v" ]];};A2() { local c="${c1[$1]}";[[ "$c" =~ ^(awk|sed ) ]]&&c="$c '${s[$2]}'"||c="$c ${c2[$2]}";shift 2;local d=` while [[ "$1" ]];do F $1;shift;done`;((P2))&&{ c="sudo $c";P2=;};local a;v=` while read a;do eval "$c '$a' $d";done<<<"$v";`;[[ "$v" ]];};A3(){ v=$((`date +%s`-v[3]));};B1() { v=No;! ((v[1]))&&{ v=;P1=1;};};eval "`type -a B1|sed '1d;s/1/2/'`";B3(){ v[$1]="$v";};B4() { local i=$1;local j=$2;shift 2;local c="cat` while [[ "$1" ]];do F $1;shift;done`";v[j]=`eval "{ $c;}"<<<"${v[i]}"`;};B5(){ v="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d$'\e' <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F$'\e' ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`egrep -v "${v[$1]}"<<<"$v"|sort`;};eval "`type -a B7|sed '1d;s/7/8/;s/-v //'`";C0() { [[ "$v" ]]&&sed -E "$s"<<<"$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v"|sed -E "$s";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { B4 0 0 63&&C1 1 $1;};C4() { echo $'\t'"Part $((++P)) of $Q done at $((`date +%s`-v[3])) sec">&4;};C5() { sudo -k;pbcopy<<<"$o";printf '\n\tThe test results are on the Clipboard.\n\n\tPlease close this window.\n';exit 2>&-;};for i in 1 2;do eval D$((i-1))'() { A'$i' $@;C0;};';for j in 2 3;do eval D$((i+2*j-3))'() { local x=$1;shift;A'$i' $@;C'$j' $x;};';done;done;trap C5 2;o=$({ A0;D0 0 N1+1 2;D0 0 $N1 1;B1;C2 27;B1&&! B2&&C2 28;D2 22 15 63;D0 0 N1+2 3;D0 0 N1+15 17;D4 3 0 N1+3 4;D4 4 0 N1+4 5;D4 N3+4 0 N1+9 59;D0 0 N1+16 99; for i in 0 1 2;do D4 N3+i 0 N1+5+i 6;done;D4 N3+3 0 N1+8 71;D4 62 1 10 7;D4 10 1 11 8;B2&&D4 18 19 53 67;D2 11 2 12 9;D2 12 3 13 10;D2 13 32 70 101 25;D2 65 6 76 13;D2 45 20 52 66;D4 66 7 77 14;D4 17 8 15 38;D0 9 16 16 77 45;C4;B2&&D0 35 49 61 75 76 78 45;B2&&{ D0 28 17 45;C4;};D0 12 40 54 16 79 45;D0 12 39 54 16 80 45;D4 31 25 77 15&&{ B4 0 8 103;B4 8 0;A2 18 74;B6 8 0 3;C3 32;};B2&&D4 19 21 0;B2&&D4 40 10 42;D2 2 0 N1+19 46 84;D2 44 34 43 53;D2 25 22 20 32;D2 33 0 N1+14 51;for i in {0..2};do A1 29 35+i 104+i;B3 25+i;done;B6 25 27 5;B6 0 26 5;B4 0 0 110;C2 69;D2 34 21 28 35;D4 35 27 29 36;A1 40 59 81;B3 18;A1 33 60 82;B8 18;B4 0 19 83;A1 27 32 39&&{ B3 20;B4 19 0;A2 33 33 40;B3 21;B6 20 21 3;};C2 36;D4 50 38 5 68;B4 19 0;D5 37 33 34 42;B2&&D4 46 35 45 55;D4 38 0 N1+20 43;B2&&D4 59 4 65 76 91;D4 63 4 19 44 75 95 96;B1&&{ D4 53 5 55 75 69&&D4 51 6 58 31;D4 56 5 56 97 75 98&&D0 0 N1+7 99;D2 55 5 27 84;D4 61 5 54 75 70;D4 14 5 14 12;D4 15 5 72 12;C4;};D4 16 5 73 12;A1 13 44 74 18;C4;B3 4;B4 4 0 85;A2 14 61 89;B4 0 5 19 102;A1 17 41 50;B7 5;C3 8;B4 4 0 88;A2 14 24 89;C4;B4 0 6 19 102;B4 4 0 86;A2 14 61 89;B4 0 7 19 102;B5 6 7;B4 0 11 73 102;A1 18 31 107 94 74||{ B2&&A1 18 26 94 74;}&&{ B7 11;B4 0 0 11;C3 23;};A1 18 26 94;B7 11;B4 0 0 11;C3 24;D4 60 14 66 92;D4 58 14 67 93;D4 26 4 21 24;D4 42 14 1 62;D4 43 37 2 90 48;D4 41 10 42;D2 48 36 47 25;A1 4 3 60&&{ B3 9;A2 14 61;B4 0 10 21;B4 9 0;A2 14 62;B4 0 0 21;B6 0 10 4;C3 5;};D4 9 41 69 100;D2 29 21 68 35;D2 49 21 48 49;B4 4 22 57 102;A1 21 46 56 74;B7 22;B4 0 0 58;C3 47;D4 54 5 7 75 76 69;D4 52 5 8 75 76 69;D4 57 4 64 76 91;D2 0 4 4 84;D2 1 4 51 84;D4 21 22 9 37;D0 0 N1+17 108; A1 23 18 28 89;B4 0 16 22 102;A1 16 25 33;B7 16;B4 0 0 34;D1 31 47;D4 64 4 71 41;C4;B4 4 12 26 89 23 102;for i in {0..3};do A1 0 N1+10+i 72 74;B7 12;B4 0 0 52;C3 N3+5+i;((i))||C4;done;A1 24 22 29;B7 12;B3 14;A2 39 57 30;B3 15;B6 14 15 4;C3 67;A1 24 75 74;B3 23;A2 39 57 30;B3 24;B6 23 24 4;C3 68;B4 4 13 27 89 65;A1 24 23;B7 13;C3 30;B4 4 0 87;A2 14 61 89 20;B4 0 17;A1 26 50 64;B7 17;C3 6;D0 0 N1+18 109;D4 7 11 6;A3;C2 39;C4;} 4>&2 2>/dev/null;);C5
    Copy the selected text to the Clipboard by pressing the key combination command-C.
    8. Launch the built-in Terminal application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad and start typing the name.
    Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
    9. If you see an error message in the Terminal window such as "Syntax error" or "Event not found," enter
    exec bash
    and press return. Then paste the script again.
    10. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, just press return three times at the password prompt. Again, the script will still run.
    If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
    11. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, a series of lines will appear in the Terminal window like this:
    [Process started]
            Part 1 of 8 done at … sec
            Part 8 of 8 done at … sec
            The test results are on the Clipboard.
            Please close this window.
    [Process completed]
    The intervals between parts won't be exactly equal, but they give a rough indication of progress. The total number of parts may be different from what's shown here.
    Wait for the final message "Process completed" to appear. If you don't see it within about ten minutes, the test probably won't complete in a reasonable time. In that case, press the key combination control-C or command-period to stop it and go to the next step. You'll have incomplete results, but still something.
    12. When the test is complete, or if you stopped it because it was taking too long, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
    At the top of the results, there will be a line that begins with the words "Start time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
    If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
    13. When you post the results, you might see an error message on the web page: "You have included content in your post that is not permitted," or "You are not authorized to post." That's a bug in the forum software. Please post the test results on Pastebin, then post a link here to the page you created.
    14. This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I may not agree with them.
    Copyright © 2014, 2015 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

  • [SOLVED]Xorg failure after installing QEmu

    After finally getting qemu installed, I decided to reboot, and was greeted with this (previously experienced) error message.
    gdm-binary[612]: WARNING: GdmDisplay: display lasted 0.061197 seconds
    gdm-binary[612]: WARNING: GdmDisplay: display lasted 0.048126 seconds
    gdm-binary[612]: WARNING: GdmDisplay: display lasted 0.051134 seconds
    gdm-binary[612]: WARNING: GdmDisplay: display lasted 0.033587 seconds
    gdm-binary[612]: WARNING: GdmLocalDisplayFactory: maximum number of X display failures reached: check X server log for errors
    Xorg.0.log
    [ 44.188]
    X.Org X Server 1.12.0
    Release Date: 2012-03-04
    [ 44.188] X Protocol Version 11, Revision 0
    [ 44.188] Build Operating System: Linux 3.2.9-1-ARCH i686
    [ 44.188] Current Operating System: Linux zenith 3.2.13-1-ARCH #1 SMP PREEMPT Sat Mar 24 08:09:57 UTC 2012 i686
    [ 44.188] Kernel command line: root=/dev/mapper/Zephyrion-root resume=/dev/mapper/Zephyrion-swap ro
    [ 44.188] Build Date: 05 March 2012 06:02:28AM
    [ 44.188]
    [ 44.188] Current version of pixman: 0.24.4
    [ 44.188] Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
    [ 44.188] Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    [ 44.189] (==) Log file: "/var/log/Xorg.0.log", Time: Thu Mar 29 18:22:36 2012
    [ 44.266] (==) Using config directory: "/etc/X11/xorg.conf.d"
    [ 44.277] (==) No Layout section. Using the first Screen section.
    [ 44.277] (==) No screen section available. Using defaults.
    [ 44.277] (**) |-->Screen "Default Screen Section" (0)
    [ 44.277] (**) | |-->Monitor "<default monitor>"
    [ 44.284] (==) No monitor specified for screen "Default Screen Section".
    Using a default monitor configuration.
    [ 44.284] (==) Automatically adding devices
    [ 44.284] (==) Automatically enabling devices
    [ 44.342] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
    [ 44.342] Entry deleted from font path.
    [ 44.403] (==) FontPath set to:
    /usr/share/fonts/misc/,
    /usr/share/fonts/TTF/,
    /usr/share/fonts/Type1/,
    /usr/share/fonts/100dpi/,
    /usr/share/fonts/75dpi/
    [ 44.403] (==) ModulePath set to "/usr/lib/xorg/modules"
    [ 44.403] (II) The server relies on udev to provide the list of input devices.
    If no devices become available, reconfigure udev or disable AutoAddDevices.
    [ 44.403] (II) Loader magic: 0x822e580
    [ 44.403] (II) Module ABI versions:
    [ 44.403] X.Org ANSI C Emulation: 0.4
    [ 44.403] X.Org Video Driver: 12.0
    [ 44.403] X.Org XInput driver : 16.0
    [ 44.403] X.Org Server Extension : 6.0
    [ 44.405] (--) PCI:*(0:1:0:0) 1002:9553:1179:fd50 rev 0, Mem @ 0xe0000000/268435456, 0xf4100000/65536, I/O @ 0x0000b000/256, BIOS @ 0x????????/131072
    [ 44.405] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
    [ 44.405] (II) LoadModule: "extmod"
    [ 44.419] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
    [ 44.447] (II) Module extmod: vendor="X.Org Foundation"
    [ 44.447] compiled for 1.12.0, module version = 1.0.0
    [ 44.447] Module class: X.Org Server Extension
    [ 44.447] ABI class: X.Org Server Extension, version 6.0
    [ 44.447] (II) Loading extension MIT-SCREEN-SAVER
    [ 44.447] (II) Loading extension XFree86-VidModeExtension
    [ 44.447] (II) Loading extension XFree86-DGA
    [ 44.447] (II) Loading extension DPMS
    [ 44.447] (II) Loading extension XVideo
    [ 44.447] (II) Loading extension XVideo-MotionCompensation
    [ 44.447] (II) Loading extension X-Resource
    [ 44.447] (II) LoadModule: "dbe"
    [ 44.447] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
    [ 44.448] (II) Module dbe: vendor="X.Org Foundation"
    [ 44.448] compiled for 1.12.0, module version = 1.0.0
    [ 44.448] Module class: X.Org Server Extension
    [ 44.448] ABI class: X.Org Server Extension, version 6.0
    [ 44.448] (II) Loading extension DOUBLE-BUFFER
    [ 44.448] (II) LoadModule: "glx"
    [ 44.448] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
    [ 44.457] (II) Module glx: vendor="X.Org Foundation"
    [ 44.457] compiled for 1.12.0, module version = 1.0.0
    [ 44.457] ABI class: X.Org Server Extension, version 6.0
    [ 44.466] (==) AIGLX enabled
    [ 44.466] (II) Loading extension GLX
    [ 44.466] (II) LoadModule: "record"
    [ 44.466] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
    [ 44.467] (II) Module record: vendor="X.Org Foundation"
    [ 44.467] compiled for 1.12.0, module version = 1.13.0
    [ 44.467] Module class: X.Org Server Extension
    [ 44.467] ABI class: X.Org Server Extension, version 6.0
    [ 44.467] (II) Loading extension RECORD
    [ 44.467] (II) LoadModule: "dri"
    [ 44.467] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
    [ 44.480] (II) Module dri: vendor="X.Org Foundation"
    [ 44.480] compiled for 1.12.0, module version = 1.0.0
    [ 44.480] ABI class: X.Org Server Extension, version 6.0
    [ 44.480] (II) Loading extension XFree86-DRI
    [ 44.480] (II) LoadModule: "dri2"
    [ 44.480] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
    [ 44.481] (II) Module dri2: vendor="X.Org Foundation"
    [ 44.481] compiled for 1.12.0, module version = 1.2.0
    [ 44.481] ABI class: X.Org Server Extension, version 6.0
    [ 44.481] (II) Loading extension DRI2
    [ 44.481] (==) Matched ati as autoconfigured driver 0
    [ 44.481] (==) Matched vesa as autoconfigured driver 1
    [ 44.481] (==) Matched fbdev as autoconfigured driver 2
    [ 44.481] (==) Assigned the driver to the xf86ConfigLayout
    [ 44.481] (II) LoadModule: "ati"
    [ 44.528] (II) Loading /usr/lib/xorg/modules/drivers/ati_drv.so
    [ 44.541] (II) Module ati: vendor="X.Org Foundation"
    [ 44.541] compiled for 1.12.0, module version = 6.14.4
    [ 44.541] Module class: X.Org Video Driver
    [ 44.541] ABI class: X.Org Video Driver, version 12.0
    [ 44.541] (II) LoadModule: "radeon"
    [ 44.541] (II) Loading /usr/lib/xorg/modules/drivers/radeon_drv.so
    [ 44.589] (II) Module radeon: vendor="X.Org Foundation"
    [ 44.589] compiled for 1.12.0, module version = 6.14.4
    [ 44.589] Module class: X.Org Video Driver
    [ 44.589] ABI class: X.Org Video Driver, version 12.0
    [ 44.589] (II) LoadModule: "vesa"
    [ 44.598] (WW) Warning, couldn't open module vesa
    [ 44.598] (II) UnloadModule: "vesa"
    [ 44.598] (II) Unloading vesa
    [ 44.598] (EE) Failed to load module "vesa" (module does not exist, 0)
    [ 44.598] (II) LoadModule: "fbdev"
    [ 44.598] (WW) Warning, couldn't open module fbdev
    [ 44.598] (II) UnloadModule: "fbdev"
    [ 44.598] (II) Unloading fbdev
    [ 44.598] (EE) Failed to load module "fbdev" (module does not exist, 0)
    [ 44.598] (II) RADEON: Driver for ATI Radeon chipsets:
    ATI Radeon Mobility X600 (M24) 3150 (PCIE), ATI FireMV 2400 (PCI),
    ATI Radeon Mobility X300 (M24) 3152 (PCIE),
    ATI FireGL M24 GL 3154 (PCIE), ATI FireMV 2400 3155 (PCI),
    ATI Radeon X600 (RV380) 3E50 (PCIE),
    ATI FireGL V3200 (RV380) 3E54 (PCIE), ATI Radeon IGP320 (A3) 4136,
    ATI Radeon IGP330/340/350 (A4) 4137, ATI Radeon 9500 AD (AGP),
    ATI Radeon 9500 AE (AGP), ATI Radeon 9600TX AF (AGP),
    ATI FireGL Z1 AG (AGP), ATI Radeon 9800SE AH (AGP),
    ATI Radeon 9800 AI (AGP), ATI Radeon 9800 AJ (AGP),
    ATI FireGL X2 AK (AGP), ATI Radeon 9600 AP (AGP),
    ATI Radeon 9600SE AQ (AGP), ATI Radeon 9600XT AR (AGP),
    ATI Radeon 9600 AS (AGP), ATI FireGL T2 AT (AGP), ATI Radeon 9650,
    ATI FireGL RV360 AV (AGP), ATI Radeon 7000 IGP (A4+) 4237,
    ATI Radeon 8500 AIW BB (AGP), ATI Radeon IGP320M (U1) 4336,
    ATI Radeon IGP330M/340M/350M (U2) 4337,
    ATI Radeon Mobility 7000 IGP 4437, ATI Radeon 9000/PRO If (AGP/PCI),
    ATI Radeon 9000 Ig (AGP/PCI), ATI Radeon X800 (R420) JH (AGP),
    ATI Radeon X800PRO (R420) JI (AGP),
    ATI Radeon X800SE (R420) JJ (AGP), ATI Radeon X800 (R420) JK (AGP),
    ATI Radeon X800 (R420) JL (AGP), ATI FireGL X3 (R420) JM (AGP),
    ATI Radeon Mobility 9800 (M18) JN (AGP),
    ATI Radeon X800 SE (R420) (AGP), ATI Radeon X800XT (R420) JP (AGP),
    ATI Radeon X800 VE (R420) JT (AGP), ATI Radeon X850 (R480) (AGP),
    ATI Radeon X850 XT (R480) (AGP), ATI Radeon X850 SE (R480) (AGP),
    ATI Radeon X850 PRO (R480) (AGP), ATI Radeon X850 XT PE (R480) (AGP),
    ATI Radeon Mobility M7 LW (AGP),
    ATI Mobility FireGL 7800 M7 LX (AGP),
    ATI Radeon Mobility M6 LY (AGP), ATI Radeon Mobility M6 LZ (AGP),
    ATI FireGL Mobility 9000 (M9) Ld (AGP),
    ATI Radeon Mobility 9000 (M9) Lf (AGP),
    ATI Radeon Mobility 9000 (M9) Lg (AGP), ATI FireMV 2400 PCI,
    ATI Radeon 9700 Pro ND (AGP), ATI Radeon 9700/9500Pro NE (AGP),
    ATI Radeon 9600TX NF (AGP), ATI FireGL X1 NG (AGP),
    ATI Radeon 9800PRO NH (AGP), ATI Radeon 9800 NI (AGP),
    ATI FireGL X2 NK (AGP), ATI Radeon 9800XT NJ (AGP),
    ATI Radeon Mobility 9600/9700 (M10/M11) NP (AGP),
    ATI Radeon Mobility 9600 (M10) NQ (AGP),
    ATI Radeon Mobility 9600 (M11) NR (AGP),
    ATI Radeon Mobility 9600 (M10) NS (AGP),
    ATI FireGL Mobility T2 (M10) NT (AGP),
    ATI FireGL Mobility T2e (M11) NV (AGP), ATI Radeon QD (AGP),
    ATI Radeon QE (AGP), ATI Radeon QF (AGP), ATI Radeon QG (AGP),
    ATI FireGL 8700/8800 QH (AGP), ATI Radeon 8500 QL (AGP),
    ATI Radeon 9100 QM (AGP), ATI Radeon 7500 QW (AGP/PCI),
    ATI Radeon 7500 QX (AGP/PCI), ATI Radeon VE/7000 QY (AGP/PCI),
    ATI Radeon VE/7000 QZ (AGP/PCI), ATI ES1000 515E (PCI),
    ATI Radeon Mobility X300 (M22) 5460 (PCIE),
    ATI Radeon Mobility X600 SE (M24C) 5462 (PCIE),
    ATI FireGL M22 GL 5464 (PCIE), ATI Radeon X800 (R423) UH (PCIE),
    ATI Radeon X800PRO (R423) UI (PCIE),
    ATI Radeon X800LE (R423) UJ (PCIE),
    ATI Radeon X800SE (R423) UK (PCIE),
    ATI Radeon X800 XTP (R430) (PCIE), ATI Radeon X800 XL (R430) (PCIE),
    ATI Radeon X800 SE (R430) (PCIE), ATI Radeon X800 (R430) (PCIE),
    ATI FireGL V7100 (R423) (PCIE), ATI FireGL V5100 (R423) UQ (PCIE),
    ATI FireGL unknown (R423) UR (PCIE),
    ATI FireGL unknown (R423) UT (PCIE),
    ATI Mobility FireGL V5000 (M26) (PCIE),
    ATI Mobility FireGL V5000 (M26) (PCIE),
    ATI Mobility Radeon X700 XL (M26) (PCIE),
    ATI Mobility Radeon X700 (M26) (PCIE),
    ATI Mobility Radeon X700 (M26) (PCIE),
    ATI Radeon X550XTX 5657 (PCIE), ATI Radeon 9100 IGP (A5) 5834,
    ATI Radeon Mobility 9100 IGP (U3) 5835,
    ATI Radeon XPRESS 200 5954 (PCIE),
    ATI Radeon XPRESS 200M 5955 (PCIE), ATI Radeon 9250 5960 (AGP),
    ATI Radeon 9200 5961 (AGP), ATI Radeon 9200 5962 (AGP),
    ATI Radeon 9200SE 5964 (AGP), ATI FireMV 2200 (PCI),
    ATI ES1000 5969 (PCI), ATI Radeon XPRESS 200 5974 (PCIE),
    ATI Radeon XPRESS 200M 5975 (PCIE),
    ATI Radeon XPRESS 200 5A41 (PCIE),
    ATI Radeon XPRESS 200M 5A42 (PCIE),
    ATI Radeon XPRESS 200 5A61 (PCIE),
    ATI Radeon XPRESS 200M 5A62 (PCIE),
    ATI Radeon X300 (RV370) 5B60 (PCIE),
    ATI Radeon X600 (RV370) 5B62 (PCIE),
    ATI Radeon X550 (RV370) 5B63 (PCIE),
    ATI FireGL V3100 (RV370) 5B64 (PCIE),
    ATI FireMV 2200 PCIE (RV370) 5B65 (PCIE),
    ATI Radeon Mobility 9200 (M9+) 5C61 (AGP),
    ATI Radeon Mobility 9200 (M9+) 5C63 (AGP),
    ATI Mobility Radeon X800 XT (M28) (PCIE),
    ATI Mobility FireGL V5100 (M28) (PCIE),
    ATI Mobility Radeon X800 (M28) (PCIE), ATI Radeon X850 5D4C (PCIE),
    ATI Radeon X850 XT PE (R480) (PCIE),
    ATI Radeon X850 SE (R480) (PCIE), ATI Radeon X850 PRO (R480) (PCIE),
    ATI unknown Radeon / FireGL (R480) 5D50 (PCIE),
    ATI Radeon X850 XT (R480) (PCIE),
    ATI Radeon X800XT (R423) 5D57 (PCIE),
    ATI FireGL V5000 (RV410) (PCIE), ATI Radeon X700 XT (RV410) (PCIE),
    ATI Radeon X700 PRO (RV410) (PCIE),
    ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X700 (RV410) (PCIE),
    ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X1800,
    ATI Mobility Radeon X1800 XT, ATI Mobility Radeon X1800,
    ATI Mobility FireGL V7200, ATI FireGL V7200, ATI FireGL V5300,
    ATI Mobility FireGL V7100, ATI Radeon X1800, ATI Radeon X1800,
    ATI Radeon X1800, ATI Radeon X1800, ATI Radeon X1800,
    ATI FireGL V7300, ATI FireGL V7350, ATI Radeon X1600, ATI RV505,
    ATI Radeon X1300/X1550, ATI Radeon X1550, ATI M54-GL,
    ATI Mobility Radeon X1400, ATI Radeon X1300/X1550,
    ATI Radeon X1550 64-bit, ATI Mobility Radeon X1300,
    ATI Mobility Radeon X1300, ATI Mobility Radeon X1300,
    ATI Mobility Radeon X1300, ATI Radeon X1300, ATI Radeon X1300,
    ATI RV505, ATI RV505, ATI FireGL V3300, ATI FireGL V3350,
    ATI Radeon X1300, ATI Radeon X1550 64-bit, ATI Radeon X1300/X1550,
    ATI Radeon X1600, ATI Radeon X1300/X1550, ATI Mobility Radeon X1450,
    ATI Radeon X1300/X1550, ATI Mobility Radeon X2300,
    ATI Mobility Radeon X2300, ATI Mobility Radeon X1350,
    ATI Mobility Radeon X1350, ATI Mobility Radeon X1450,
    ATI Radeon X1300, ATI Radeon X1550, ATI Mobility Radeon X1350,
    ATI FireMV 2250, ATI Radeon X1550 64-bit, ATI Radeon X1600,
    ATI Radeon X1650, ATI Radeon X1600, ATI Radeon X1600,
    ATI Mobility FireGL V5200, ATI Mobility Radeon X1600,
    ATI Radeon X1650, ATI Radeon X1650, ATI Radeon X1600,
    ATI Radeon X1300 XT/X1600 Pro, ATI FireGL V3400,
    ATI Mobility FireGL V5250, ATI Mobility Radeon X1700,
    ATI Mobility Radeon X1700 XT, ATI FireGL V5200,
    ATI Mobility Radeon X1700, ATI Radeon X2300HD,
    ATI Mobility Radeon HD 2300, ATI Mobility Radeon HD 2300,
    ATI Radeon X1950, ATI Radeon X1900, ATI Radeon X1950,
    ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
    ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
    ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
    ATI AMD Stream Processor, ATI Radeon X1900, ATI Radeon X1950,
    ATI RV560, ATI RV560, ATI Mobility Radeon X1900, ATI RV560,
    ATI Radeon X1950 GT, ATI RV570, ATI RV570, ATI FireGL V7400,
    ATI RV560, ATI Radeon X1650, ATI Radeon X1650, ATI RV560,
    ATI Radeon 9100 PRO IGP 7834, ATI Radeon Mobility 9200 IGP 7835,
    ATI Radeon X1200, ATI Radeon X1200, ATI Radeon X1200,
    ATI Radeon X1200, ATI Radeon X1200, ATI RS740, ATI RS740M, ATI RS740,
    ATI RS740M, ATI Radeon HD 2900 XT, ATI Radeon HD 2900 XT,
    ATI Radeon HD 2900 XT, ATI Radeon HD 2900 Pro, ATI Radeon HD 2900 GT,
    ATI FireGL V8650, ATI FireGL V8600, ATI FireGL V7600,
    ATI Radeon 4800 Series, ATI Radeon HD 4870 x2,
    ATI Radeon 4800 Series, ATI Radeon HD 4850 x2,
    ATI FirePro V8750 (FireGL), ATI FirePro V7760 (FireGL),
    ATI Mobility RADEON HD 4850, ATI Mobility RADEON HD 4850 X2,
    ATI Radeon 4800 Series, ATI FirePro RV770, AMD FireStream 9270,
    AMD FireStream 9250, ATI FirePro V8700 (FireGL),
    ATI Mobility RADEON HD 4870, ATI Mobility RADEON M98,
    ATI Mobility RADEON HD 4870, ATI Radeon 4800 Series,
    ATI Radeon 4800 Series, ATI FirePro M7750, ATI M98, ATI M98, ATI M98,
    ATI Mobility Radeon HD 4650, ATI Radeon RV730 (AGP),
    ATI Mobility Radeon HD 4670, ATI FirePro M5750,
    ATI Mobility Radeon HD 4670, ATI Radeon RV730 (AGP),
    ATI RV730XT [Radeon HD 4670], ATI RADEON E4600,
    ATI Radeon HD 4600 Series, ATI RV730 PRO [Radeon HD 4650],
    ATI FirePro V7750 (FireGL), ATI FirePro V5700 (FireGL),
    ATI FirePro V3750 (FireGL), ATI Mobility Radeon HD 4830,
    ATI Mobility Radeon HD 4850, ATI FirePro M7740, ATI RV740,
    ATI Radeon HD 4770, ATI Radeon HD 4700 Series, ATI Radeon HD 4770,
    ATI FirePro M5750, ATI RV610, ATI Radeon HD 2400 XT,
    ATI Radeon HD 2400 Pro, ATI Radeon HD 2400 PRO AGP, ATI FireGL V4000,
    ATI RV610, ATI Radeon HD 2350, ATI Mobility Radeon HD 2400 XT,
    ATI Mobility Radeon HD 2400, ATI RADEON E2400, ATI RV610,
    ATI FireMV 2260, ATI RV670, ATI Radeon HD3870,
    ATI Mobility Radeon HD 3850, ATI Radeon HD3850,
    ATI Mobility Radeon HD 3850 X2, ATI RV670,
    ATI Mobility Radeon HD 3870, ATI Mobility Radeon HD 3870 X2,
    ATI Radeon HD3870 X2, ATI FireGL V7700, ATI Radeon HD3850,
    ATI Radeon HD3690, AMD Firestream 9170, ATI Radeon HD 4550,
    ATI Radeon RV710, ATI Radeon RV710, ATI Radeon RV710,
    ATI Radeon HD 4350, ATI Mobility Radeon 4300 Series,
    ATI Mobility Radeon 4500 Series, ATI Mobility Radeon 4500 Series,
    ATI FirePro RG220, ATI Mobility Radeon 4330, ATI RV630,
    ATI Mobility Radeon HD 2600, ATI Mobility Radeon HD 2600 XT,
    ATI Radeon HD 2600 XT AGP, ATI Radeon HD 2600 Pro AGP,
    ATI Radeon HD 2600 XT, ATI Radeon HD 2600 Pro, ATI Gemini RV630,
    ATI Gemini Mobility Radeon HD 2600 XT, ATI FireGL V5600,
    ATI FireGL V3600, ATI Radeon HD 2600 LE,
    ATI Mobility FireGL Graphics Processor, ATI Radeon HD 3470,
    ATI Mobility Radeon HD 3430, ATI Mobility Radeon HD 3400 Series,
    ATI Radeon HD 3450, ATI Radeon HD 3450, ATI Radeon HD 3430,
    ATI Radeon HD 3450, ATI FirePro V3700, ATI FireMV 2450,
    ATI FireMV 2260, ATI FireMV 2260, ATI Radeon HD 3600 Series,
    ATI Radeon HD 3650 AGP, ATI Radeon HD 3600 PRO,
    ATI Radeon HD 3600 XT, ATI Radeon HD 3600 PRO,
    ATI Mobility Radeon HD 3650, ATI Mobility Radeon HD 3670,
    ATI Mobility FireGL V5700, ATI Mobility FireGL V5725,
    ATI Radeon HD 3200 Graphics, ATI Radeon 3100 Graphics,
    ATI Radeon HD 3200 Graphics, ATI Radeon 3100 Graphics,
    ATI Radeon HD 3300 Graphics, ATI Radeon HD 3200 Graphics,
    ATI Radeon 3000 Graphics, SUMO, SUMO, SUMO2, SUMO2, SUMO2, SUMO2,
    SUMO, SUMO, SUMO, SUMO, SUMO, SUMO, SUMO, ATI Radeon HD 4200,
    ATI Radeon 4100, ATI Mobility Radeon HD 4200,
    ATI Mobility Radeon 4100, ATI Radeon HD 4290, ATI Radeon HD 4250,
    AMD Radeon HD 6310 Graphics, AMD Radeon HD 6310 Graphics,
    AMD Radeon HD 6250 Graphics, AMD Radeon HD 6250 Graphics,
    AMD Radeon HD 6300 Series Graphics,
    AMD Radeon HD 6200 Series Graphics, PALM, PALM, CYPRESS,
    ATI FirePro (FireGL) Graphics Adapter,
    ATI FirePro (FireGL) Graphics Adapter,
    ATI FirePro (FireGL) Graphics Adapter, AMD Firestream 9370,
    AMD Firestream 9350, ATI Radeon HD 5800 Series,
    ATI Radeon HD 5800 Series, ATI Radeon HD 5800 Series,
    ATI Radeon HD 5800 Series, ATI Radeon HD 5900 Series,
    ATI Radeon HD 5900 Series, ATI Mobility Radeon HD 5800 Series,
    ATI Mobility Radeon HD 5800 Series,
    ATI FirePro (FireGL) Graphics Adapter,
    ATI FirePro (FireGL) Graphics Adapter,
    ATI Mobility Radeon HD 5800 Series, ATI Radeon HD 5700 Series,
    ATI Radeon HD 5700 Series, ATI Radeon HD 6700 Series,
    ATI Radeon HD 5700 Series, ATI Radeon HD 6700 Series,
    ATI Mobility Radeon HD 5000 Series,
    ATI Mobility Radeon HD 5000 Series, ATI Mobility Radeon HD 5570,
    ATI FirePro (FireGL) Graphics Adapter,
    ATI FirePro (FireGL) Graphics Adapter, ATI Radeon HD 5670,
    ATI Radeon HD 5570, ATI Radeon HD 5500 Series, REDWOOD,
    ATI Mobility Radeon HD 5000 Series,
    ATI Mobility Radeon HD 5000 Series, ATI Mobility Radeon Graphics,
    ATI Mobility Radeon Graphics, CEDAR,
    ATI FirePro (FireGL) Graphics Adapter,
    ATI FirePro (FireGL) Graphics Adapter, ATI FirePro 2270, CEDAR,
    ATI Radeon HD 5450, CEDAR, CEDAR, CAYMAN, CAYMAN, CAYMAN, CAYMAN,
    CAYMAN, CAYMAN, CAYMAN, CAYMAN, CAYMAN, CAYMAN,
    AMD Radeon HD 6900 Series, AMD Radeon HD 6900 Series, CAYMAN, CAYMAN,
    CAYMAN, AMD Radeon HD 6900M Series, Mobility Radeon HD 6000 Series,
    BARTS, BARTS, Mobility Radeon HD 6000 Series,
    Mobility Radeon HD 6000 Series, BARTS, BARTS, BARTS, BARTS,
    AMD Radeon HD 6800 Series, AMD Radeon HD 6800 Series,
    AMD Radeon HD 6700 Series, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS,
    TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS,
    TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS,
    CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS,
    CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, ARUBA, ARUBA, ARUBA,
    ARUBA, ARUBA, ARUBA, ARUBA
    [ 44.605] (++) using VT number 7
    [ 44.610] (II) RADEON(0): RADEONPreInit
    [ 44.610] (II) RADEON(0): TOTO SAYS 00000000f4100000
    [ 44.610] (II) RADEON(0): MMIO registers at 0x00000000f4100000: size 64KB
    [ 44.610] (II) RADEON(0): PCI bus 1 card 0 func 0
    [ 44.610] (II) RADEON(0): Creating default Display subsection in Screen section
    "Default Screen Section" for depth/fbbpp 24/32
    [ 44.610] (==) RADEON(0): Depth 24, (--) framebuffer bpp 32
    [ 44.610] (II) RADEON(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
    [ 44.610] (==) RADEON(0): Default visual is TrueColor
    [ 44.610] (II) Loading sub module "vgahw"
    [ 44.610] (II) LoadModule: "vgahw"
    [ 44.610] (II) Loading /usr/lib/xorg/modules/libvgahw.so
    [ 44.618] (II) Module vgahw: vendor="X.Org Foundation"
    [ 44.618] compiled for 1.12.0, module version = 0.1.0
    [ 44.618] ABI class: X.Org Video Driver, version 12.0
    [ 44.618] (II) RADEON(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0
    [ 44.618] (==) RADEON(0): RGB weight 888
    [ 44.618] (II) RADEON(0): Using 8 bits per RGB (8 bit DAC)
    [ 44.618] (--) RADEON(0): Chipset: "ATI Mobility Radeon 4500 Series" (ChipID = 0x9553)
    [ 44.618] (--) RADEON(0): Linear framebuffer at 0x00000000e0000000
    [ 44.618] (II) RADEON(0): PCIE card detected
    [ 44.618] (II) Loading sub module "int10"
    [ 44.618] (II) LoadModule: "int10"
    [ 44.619] (II) Loading /usr/lib/xorg/modules/libint10.so
    [ 44.642] (II) Module int10: vendor="X.Org Foundation"
    [ 44.642] compiled for 1.12.0, module version = 1.0.0
    [ 44.642] ABI class: X.Org Video Driver, version 12.0
    [ 44.642] (II) RADEON(0): initializing int10
    [ 44.648] (II) RADEON(0): Primary V_BIOS segment is: 0xc000
    [ 44.650] (II) RADEON(0): ATOM BIOS detected
    [ 44.678] (II) RADEON(0): ATOM BIOS Rom:
    [ 44.678] SubsystemVendorID: 0x1179 SubsystemID: 0xfd50
    [ 44.678] IOBaseAddress: 0xb000
    [ 44.678] Filename: BR37095.001
    [ 44.678] BIOS Bootup Message:
    BR37095.001 M92 DDR3 64bit 720e/800m
    [ 44.678] (II) RADEON(0): Call to AtomBIOS Init succeeded
    [ 44.678] (II) RADEON(0): Framebuffer space used by Firmware (kb): 20
    [ 44.678] (II) RADEON(0): Start of VRAM area used by Firmware: 0x7ffec
    [ 44.678] (II) RADEON(0): AtomBIOS requests 20kB of VRAM scratch space
    [ 44.678] (II) RADEON(0): AtomBIOS VRAM scratch base: 0x7ffec
    [ 44.679] (II) RADEON(0): Cannot get VRAM scratch space. Allocating in main memory instead
    [ 44.679] (II) RADEON(0): Call to AtomBIOS Set FB Space succeeded
    [ 44.679] (II) RADEON(0): Default Engine Clock: 720000
    [ 44.679] (II) RADEON(0): Default Memory Clock: 800000
    [ 44.679] (II) RADEON(0): Maximum Pixel ClockPLL Frequency Output: 1200000
    [ 44.679] (II) RADEON(0): Minimum Pixel ClockPLL Frequency Output: 0
    [ 44.679] (II) RADEON(0): Maximum Pixel ClockPLL Frequency Input: 16000
    [ 44.679] (II) RADEON(0): Minimum Pixel ClockPLL Frequency Input: 6000
    [ 44.679] (II) RADEON(0): Maximum Pixel Clock: 400000
    [ 44.679] (II) RADEON(0): Reference Clock: 27000
    [ 44.679] drmOpenDevice: node name is /dev/dri/card0
    [ 44.679] drmOpenDevice: open result is 8, (OK)
    [ 44.679] drmOpenByBusid: Searching for BusID pci:0000:01:00.0
    [ 44.679] drmOpenDevice: node name is /dev/dri/card0
    [ 44.679] drmOpenDevice: open result is 8, (OK)
    [ 44.679] drmOpenByBusid: drmOpenMinor returns 8
    [ 44.679] drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
    [ 44.679] (EE) RADEON(0): [dri] RADEONDRIGetVersion failed because of a version mismatch.
    [dri] This chipset requires a kernel module version of 1.17.0,
    [dri] but the kernel reports a version of 2.12.0.[dri] Make sure your module is loaded prior to starting X, and
    [dri] that this driver was built with support for KMS.
    [dri] Aborting.
    [ 44.679] (II) RADEON(0): RADEONFreeScreen
    [ 44.679] (II) UnloadModule: "radeon"
    [ 44.679] (II) UnloadSubModule: "int10"
    [ 44.679] (II) Unloading int10
    [ 44.679] (II) UnloadSubModule: "vgahw"
    [ 44.679] (II) Unloading vgahw
    [ 44.679] (EE) Screen(s) found, but none have a usable configuration.
    [ 44.679]
    Fatal server error:
    [ 44.679] no screens found
    [ 44.679]
    Please consult the The X.Org Foundation support
    at http://wiki.x.org
    for help.
    [ 44.679] Please also check the log file at "/var/log/Xorg.0.log" for additional information.
    [ 44.679]
    [ 44.693] Server terminated with error (1). Closing log file.
    The previous fix didn't work (reinstalling xorg).
    My pacman database is up to date.
    lspci | grep "VGA"
    01:00.0 VGA compatible controller: Advanced Micro Devices [AMD] nee ATI RV710 [Mobility Radeon HD 4500/5100 Series]
    /etc/rc.conf
    # /etc/rc.conf - Main Configuration for Arch Linux
    # See 'man 5 rc.conf' for more details
    # LOCALIZATION
    HARDWARECLOCK="UTC"
    TIMEZONE="America/Los_Angeles"
    KEYMAP="us"
    CONSOLEFONT=
    CONSOLEMAP=
    LOCALE=
    DAEMON_LOCALE="yes"
    USECOLOR="yes"
    # HARDWARE
    MODULES=()
    USEDMRAID="no"
    USEBTRFS="no"
    USELVM="yes"
    # NETWORKING
    HOSTNAME="zenith"
    interface="eth0"
    address=
    netmask=
    broadcast=
    gateway=
    NETWORK_PERSIST="no"
    # DAEMONS
    DAEMONS=(syslog-ng network crond dbus networkmanager)
    /etc/inittab
    # /etc/inittab
    # Runlevels:
    # 0 Halt
    # 1(S) Single-user
    # 2 Not used
    # 3 Multi-user
    # 4 Not used
    # 5 X11
    # 6 Reboot
    ## Only one of the following two lines can be uncommented!
    # Boot to console
    #id:3:initdefault:
    # Boot to X11
    id:5:initdefault:
    rc::sysinit:/etc/rc.sysinit
    rs:S1:wait:/etc/rc.single
    rm:2345:wait:/etc/rc.multi
    rh:06:wait:/etc/rc.shutdown
    su:S:wait:/sbin/sulogin -p
    # -8 options fixes umlauts problem on login
    c1:2345:respawn:/sbin/agetty -8 -s 38400 tty1 linux
    c2:2345:respawn:/sbin/agetty -8 -s 38400 tty2 linux
    c3:2345:respawn:/sbin/agetty -8 -s 38400 tty3 linux
    c4:2345:respawn:/sbin/agetty -8 -s 38400 tty4 linux
    c5:2345:respawn:/sbin/agetty -8 -s 38400 tty5 linux
    c6:2345:respawn:/sbin/agetty -8 -s 38400 tty6 linux
    # Serial Virtual Console for KVM and others VMs
    #s0:2345:respawn:/sbin/agetty -8 -s 9600 ttyS0 linux
    # Hypervisor Virtual Console for Xen and KVM
    #h0:2345:respawn:/sbin/agetty -8 -s 38400 hvc0 linux
    ca::ctrlaltdel:/sbin/shutdown -t3 -r now
    # Example lines for starting a login manager
    #x:5:respawn:/usr/bin/xdm -nodaemon
    x:5:respawn:/usr/sbin/gdm -nodaemon
    #x:5:respawn:/usr/bin/kdm -nodaemon
    #x:5:respawn:/usr/bin/slim >/dev/null 2>&1
    # End of file
    NOTE: I have tried both the inittab and daemon method for getting GDM to start.
    GDM:0 log
    X.Org X Server 1.12.0
    Release Date: 2012-03-04
    X Protocol Version 11, Revision 0
    Build Operating System: Linux 3.2.9-1-ARCH i686
    Current Operating System: Linux zenith 3.2.13-1-ARCH #1 SMP PREEMPT Sat Mar 24 08:09:57 UTC 2012 i686
    Kernel command line: root=/dev/mapper/Zephyrion-root resume=/dev/mapper/Zephyrion-swap ro
    Build Date: 05 March 2012 06:02:28AM
    Current version of pixman: 0.24.4
    Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
    Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    (==) Log file: "/var/log/Xorg.0.log", Time: Thu Mar 29 18:22:36 2012
    (==) Using config directory: "/etc/X11/xorg.conf.d"
    (==) No Layout section. Using the first Screen section.
    (==) No screen section available. Using defaults.
    (**) |-->Screen "Default Screen Section" (0)
    (**) | |-->Monitor "<default monitor>"
    (==) No monitor specified for screen "Default Screen Section".
    Using a default monitor configuration.
    (==) Automatically adding devices
    (==) Automatically enabling devices
    (WW) The directory "/usr/share/fonts/OTF/" does not exist.
    Entry deleted from font path.
    (==) FontPath set to:
    /usr/share/fonts/misc/,
    /usr/share/fonts/TTF/,
    /usr/share/fonts/Type1/,
    /usr/share/fonts/100dpi/,
    /usr/share/fonts/75dpi/
    (==) ModulePath set to "/usr/lib/xorg/modules"
    (II) The server relies on udev to provide the list of input devices.
    If no devices become available, reconfigure udev or disable AutoAddDevices.
    (--) PCI:*(0:1:0:0) 1002:9553:1179:fd50 rev 0, Mem @ 0xe0000000/268435456, 0xf4100000/65536, I/O @ 0x0000b000/256, BIOS @ 0x????????/131072
    (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
    (II) Module extmod: vendor="X.Org Foundation"
    compiled for 1.12.0, module version = 1.0.0
    (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
    (II) Module dbe: vendor="X.Org Foundation"
    compiled for 1.12.0, module version = 1.0.0
    (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
    (II) Module glx: vendor="X.Org Foundation"
    compiled for 1.12.0, module version = 1.0.0
    (==) AIGLX enabled
    (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
    (II) Module record: vendor="X.Org Foundation"
    compiled for 1.12.0, module version = 1.13.0
    (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
    (II) Module dri: vendor="X.Org Foundation"
    compiled for 1.12.0, module version = 1.0.0
    (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
    (II) Module dri2: vendor="X.Org Foundation"
    compiled for 1.12.0, module version = 1.2.0
    (==) Matched ati as autoconfigured driver 0
    (==) Matched vesa as autoconfigured driver 1
    (==) Matched fbdev as autoconfigured driver 2
    (==) Assigned the driver to the xf86ConfigLayout
    (II) Loading /usr/lib/xorg/modules/drivers/ati_drv.so
    (II) Module ati: vendor="X.Org Foundation"
    compiled for 1.12.0, module version = 6.14.4
    (II) Loading /usr/lib/xorg/modules/drivers/radeon_drv.so
    (II) Module radeon: vendor="X.Org Foundation"
    compiled for 1.12.0, module version = 6.14.4
    (WW) Warning, couldn't open module vesa
    (II) Unloading vesa
    (EE) Failed to load module "vesa" (module does not exist, 0)
    (WW) Warning, couldn't open module fbdev
    (II) Unloading fbdev
    (EE) Failed to load module "fbdev" (module does not exist, 0)
    (II) RADEON: Driver for ATI Radeon chipsets:
    ATI Radeon Mobility X600 (M24) 3150 (PCIE), ATI FireMV 2400 (PCI),
    ATI Radeon Mobility X300 (M24) 3152 (PCIE),
    ATI FireGL M24 GL 3154 (PCIE), ATI FireMV 2400 3155 (PCI),
    ATI Radeon X600 (RV380) 3E50 (PCIE),
    ATI FireGL V3200 (RV380) 3E54 (PCIE), ATI Radeon IGP320 (A3) 4136,
    ATI Radeon IGP330/340/350 (A4) 4137, ATI Radeon 9500 AD (AGP),
    ATI Radeon 9500 AE (AGP), ATI Radeon 9600TX AF (AGP),
    ATI FireGL Z1 AG (AGP), ATI Radeon 9800SE AH (AGP),
    ATI Radeon 9800 AI (AGP), ATI Radeon 9800 AJ (AGP),
    ATI FireGL X2 AK (AGP), ATI Radeon 9600 AP (AGP),
    ATI Radeon 9600SE AQ (AGP), ATI Radeon 9600XT AR (AGP),
    ATI Radeon 9600 AS (AGP), ATI FireGL T2 AT (AGP), ATI Radeon 9650,
    ATI FireGL RV360 AV (AGP), ATI Radeon 7000 IGP (A4+) 4237,
    ATI Radeon 8500 AIW BB (AGP), ATI Radeon IGP320M (U1) 4336,
    ATI Radeon IGP330M/340M/350M (U2) 4337,
    ATI Radeon Mobility 7000 IGP 4437, ATI Radeon 9000/PRO If (AGP/PCI),
    ATI Radeon 9000 Ig (AGP/PCI), ATI Radeon X800 (R420) JH (AGP),
    ATI Radeon X800PRO (R420) JI (AGP),
    ATI Radeon X800SE (R420) JJ (AGP), ATI Radeon X800 (R420) JK (AGP),
    ATI Radeon X800 (R420) JL (AGP), ATI FireGL X3 (R420) JM (AGP),
    ATI Radeon Mobility 9800 (M18) JN (AGP),
    ATI Radeon X800 SE (R420) (AGP), ATI Radeon X800XT (R420) JP (AGP),
    ATI Radeon X800 VE (R420) JT (AGP), ATI Radeon X850 (R480) (AGP),
    ATI Radeon X850 XT (R480) (AGP), ATI Radeon X850 SE (R480) (AGP),
    ATI Radeon X850 PRO (R480) (AGP), ATI Radeon X850 XT PE (R480) (AGP),
    ATI Radeon Mobility M7 LW (AGP),
    ATI Mobility FireGL 7800 M7 LX (AGP),
    ATI Radeon Mobility M6 LY (AGP), ATI Radeon Mobility M6 LZ (AGP),
    ATI FireGL Mobility 9000 (M9) Ld (AGP),
    ATI Radeon Mobility 9000 (M9) Lf (AGP),
    ATI Radeon Mobility 9000 (M9) Lg (AGP), ATI FireMV 2400 PCI,
    ATI Radeon 9700 Pro ND (AGP), ATI Radeon 9700/9500Pro NE (AGP),
    ATI Radeon 9600TX NF (AGP), ATI FireGL X1 NG (AGP),
    ATI Radeon 9800PRO NH (AGP), ATI Radeon 9800 NI (AGP),
    ATI FireGL X2 NK (AGP), ATI Radeon 9800XT NJ (AGP),
    ATI Radeon Mobility 9600/9700 (M10/M11) NP (AGP),
    ATI Radeon Mobility 9600 (M10) NQ (AGP),
    ATI Radeon Mobility 9600 (M11) NR (AGP),
    ATI Radeon Mobility 9600 (M10) NS (AGP),
    ATI FireGL Mobility T2 (M10) NT (AGP),
    ATI FireGL Mobility T2e (M11) NV (AGP), ATI Radeon QD (AGP),
    ATI Radeon QE (AGP), ATI Radeon QF (AGP), ATI Radeon QG (AGP),
    ATI FireGL 8700/8800 QH (AGP), ATI Radeon 8500 QL (AGP),
    ATI Radeon 9100 QM (AGP), ATI Radeon 7500 QW (AGP/PCI),
    ATI Radeon 7500 QX (AGP/PCI), ATI Radeon VE/7000 QY (AGP/PCI),
    ATI Radeon VE/7000 QZ (AGP/PCI), ATI ES1000 515E (PCI),
    ATI Radeon Mobility X300 (M22) 5460 (PCIE),
    ATI Radeon Mobility X600 SE (M24C) 5462 (PCIE),
    ATI FireGL M22 GL 5464 (PCIE), ATI Radeon X800 (R423) UH (PCIE),
    ATI Radeon X800PRO (R423) UI (PCIE),
    ATI Radeon X800LE (R423) UJ (PCIE),
    ATI Radeon X800SE (R423) UK (PCIE),
    ATI Radeon X800 XTP (R430) (PCIE), ATI Radeon X800 XL (R430) (PCIE),
    ATI Radeon X800 SE (R430) (PCIE), ATI Radeon X800 (R430) (PCIE),
    ATI FireGL V7100 (R423) (PCIE), ATI FireGL V5100 (R423) UQ (PCIE),
    ATI FireGL unknown (R423) UR (PCIE),
    ATI FireGL unknown (R423) UT (PCIE),
    ATI Mobility FireGL V5000 (M26) (PCIE),
    ATI Mobility FireGL V5000 (M26) (PCIE),
    ATI Mobility Radeon X700 XL (M26) (PCIE),
    ATI Mobility Radeon X700 (M26) (PCIE),
    ATI Mobility Radeon X700 (M26) (PCIE),
    ATI Radeon X550XTX 5657 (PCIE), ATI Radeon 9100 IGP (A5) 5834,
    ATI Radeon Mobility 9100 IGP (U3) 5835,
    ATI Radeon XPRESS 200 5954 (PCIE),
    ATI Radeon XPRESS 200M 5955 (PCIE), ATI Radeon 9250 5960 (AGP),
    ATI Radeon 9200 5961 (AGP), ATI Radeon 9200 5962 (AGP),
    ATI Radeon 9200SE 5964 (AGP), ATI FireMV 2200 (PCI),
    ATI ES1000 5969 (PCI), ATI Radeon XPRESS 200 5974 (PCIE),
    ATI Radeon XPRESS 200M 5975 (PCIE),
    ATI Radeon XPRESS 200 5A41 (PCIE),
    ATI Radeon XPRESS 200M 5A42 (PCIE),
    ATI Radeon XPRESS 200 5A61 (PCIE),
    ATI Radeon XPRESS 200M 5A62 (PCIE),
    ATI Radeon X300 (RV370) 5B60 (PCIE),
    ATI Radeon X600 (RV370) 5B62 (PCIE),
    ATI Radeon X550 (RV370) 5B63 (PCIE),
    ATI FireGL V3100 (RV370) 5B64 (PCIE),
    ATI FireMV 2200 PCIE (RV370) 5B65 (PCIE),
    ATI Radeon Mobility 9200 (M9+) 5C61 (AGP),
    ATI Radeon Mobility 9200 (M9+) 5C63 (AGP),
    ATI Mobility Radeon X800 XT (M28) (PCIE),
    ATI Mobility FireGL V5100 (M28) (PCIE),
    ATI Mobility Radeon X800 (M28) (PCIE), ATI Radeon X850 5D4C (PCIE),
    ATI Radeon X850 XT PE (R480) (PCIE),
    ATI Radeon X850 SE (R480) (PCIE), ATI Radeon X850 PRO (R480) (PCIE),
    ATI unknown Radeon / FireGL (R480) 5D50 (PCIE),
    ATI Radeon X850 XT (R480) (PCIE),
    ATI Radeon X800XT (R423) 5D57 (PCIE),
    ATI FireGL V5000 (RV410) (PCIE), ATI Radeon X700 XT (RV410) (PCIE),
    ATI Radeon X700 PRO (RV410) (PCIE),
    ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X700 (RV410) (PCIE),
    ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X1800,
    ATI Mobility Radeon X1800 XT, ATI Mobility Radeon X1800,
    ATI Mobility FireGL V7200, ATI FireGL V7200, ATI FireGL V5300,
    ATI Mobility FireGL V7100, ATI Radeon X1800, ATI Radeon X1800,
    ATI Radeon X1800, ATI Radeon X1800, ATI Radeon X1800,
    ATI FireGL V7300, ATI FireGL V7350, ATI Radeon X1600, ATI RV505,
    ATI Radeon X1300/X1550, ATI Radeon X1550, ATI M54-GL,
    ATI Mobility Radeon X1400, ATI Radeon X1300/X1550,
    ATI Radeon X1550 64-bit, ATI Mobility Radeon X1300,
    ATI Mobility Radeon X1300, ATI Mobility Radeon X1300,
    ATI Mobility Radeon X1300, ATI Radeon X1300, ATI Radeon X1300,
    ATI RV505, ATI RV505, ATI FireGL V3300, ATI FireGL V3350,
    ATI Radeon X1300, ATI Radeon X1550 64-bit, ATI Radeon X1300/X1550,
    ATI Radeon X1600, ATI Radeon X1300/X1550, ATI Mobility Radeon X1450,
    ATI Radeon X1300/X1550, ATI Mobility Radeon X2300,
    ATI Mobility Radeon X2300, ATI Mobility Radeon X1350,
    ATI Mobility Radeon X1350, ATI Mobility Radeon X1450,
    ATI Radeon X1300, ATI Radeon X1550, ATI Mobility Radeon X1350,
    ATI FireMV 2250, ATI Radeon X1550 64-bit, ATI Radeon X1600,
    ATI Radeon X1650, ATI Radeon X1600, ATI Radeon X1600,
    ATI Mobility FireGL V5200, ATI Mobility Radeon X1600,
    ATI Radeon X1650, ATI Radeon X1650, ATI Radeon X1600,
    ATI Radeon X1300 XT/X1600 Pro, ATI FireGL V3400,
    ATI Mobility FireGL V5250, ATI Mobility Radeon X1700,
    ATI Mobility Radeon X1700 XT, ATI FireGL V5200,
    ATI Mobility Radeon X1700, ATI Radeon X2300HD,
    ATI Mobility Radeon HD 2300, ATI Mobility Radeon HD 2300,
    ATI Radeon X1950, ATI Radeon X1900, ATI Radeon X1950,
    ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
    ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
    ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
    ATI AMD Stream Processor, ATI Radeon X1900, ATI Radeon X1950,
    ATI RV560, ATI RV560, ATI Mobility Radeon X1900, ATI RV560,
    ATI Radeon X1950 GT, ATI RV570, ATI RV570, ATI FireGL V7400,
    ATI RV560, ATI Radeon X1650, ATI Radeon X1650, ATI RV560,
    ATI Radeon 9100 PRO IGP 7834, ATI Radeon Mobility 9200 IGP 7835,
    ATI Radeon X1200, ATI Radeon X1200, ATI Radeon X1200,
    ATI Radeon X1200, ATI Radeon X1200, ATI RS740, ATI RS740M, ATI RS740,
    ATI RS740M, ATI Radeon HD 2900 XT, ATI Radeon HD 2900 XT,
    ATI Radeon HD 2900 XT, ATI Radeon HD 2900 Pro, ATI Radeon HD 2900 GT,
    ATI FireGL V8650, ATI FireGL V8600, ATI FireGL V7600,
    ATI Radeon 4800 Series, ATI Radeon HD 4870 x2,
    ATI Radeon 4800 Series, ATI Radeon HD 4850 x2,
    ATI FirePro V8750 (FireGL), ATI FirePro V7760 (FireGL),
    ATI Mobility RADEON HD 4850, ATI Mobility RADEON HD 4850 X2,
    ATI Radeon 4800 Series, ATI FirePro RV770, AMD FireStream 9270,
    AMD FireStream 9250, ATI FirePro V8700 (FireGL),
    ATI Mobility RADEON HD 4870, ATI Mobility RADEON M98,
    ATI Mobility RADEON HD 4870, ATI Radeon 4800 Series,
    ATI Radeon 4800 Series, ATI FirePro M7750, ATI M98, ATI M98, ATI M98,
    ATI Mobility Radeon HD 4650, ATI Radeon RV730 (AGP),
    ATI Mobility Radeon HD 4670, ATI FirePro M5750,
    ATI Mobility Radeon HD 4670, ATI Radeon RV730 (AGP),
    ATI RV730XT [Radeon HD 4670], ATI RADEON E4600,
    ATI Radeon HD 4600 Series, ATI RV730 PRO [Radeon HD 4650],
    ATI FirePro V7750 (FireGL), ATI FirePro V5700 (FireGL),
    ATI FirePro V3750 (FireGL), ATI Mobility Radeon HD 4830,
    ATI Mobility Radeon HD 4850, ATI FirePro M7740, ATI RV740,
    ATI Radeon HD 4770, ATI Radeon HD 4700 Series, ATI Radeon HD 4770,
    ATI FirePro M5750, ATI RV610, ATI Radeon HD 2400 XT,
    ATI Radeon HD 2400 Pro, ATI Radeon HD 2400 PRO AGP, ATI FireGL V4000,
    ATI RV610, ATI Radeon HD 2350, ATI Mobility Radeon HD 2400 XT,
    ATI Mobility Radeon HD 2400, ATI RADEON E2400, ATI RV610,
    ATI FireMV 2260, ATI RV670, ATI Radeon HD3870,
    ATI Mobility Radeon HD 3850, ATI Radeon HD3850,
    ATI Mobility Radeon HD 3850 X2, ATI RV670,
    ATI Mobility Radeon HD 3870, ATI Mobility Radeon HD 3870 X2,
    ATI Radeon HD3870 X2, ATI FireGL V7700, ATI Radeon HD3850,
    ATI Radeon HD3690, AMD Firestream 9170, ATI Radeon HD 4550,
    ATI Radeon RV710, ATI Radeon RV710, ATI Radeon RV710,
    ATI Radeon HD 4350, ATI Mobility Radeon 4300 Series,
    ATI Mobility Radeon 4500 Series, ATI Mobility Radeon 4500 Series,
    ATI FirePro RG220, ATI Mobility Radeon 4330, ATI RV630,
    ATI Mobility Radeon HD 2600, ATI Mobility Radeon HD 2600 XT,
    ATI Radeon HD 2600 XT AGP, ATI Radeon HD 2600 Pro AGP,
    ATI Radeon HD 2600 XT, ATI Radeon HD 2600 Pro, ATI Gemini RV630,
    ATI Gemini Mobility Radeon HD 2600 XT, ATI FireGL V5600,
    ATI FireGL V3600, ATI Radeon HD 2600 LE,
    ATI Mobility FireGL Graphics Processor, ATI Radeon HD 3470,
    ATI Mobility Radeon HD 3430, ATI Mobility Radeon HD 3400 Series,
    ATI Radeon HD 3450, ATI Radeon HD 3450, ATI Radeon HD 3430,
    ATI Radeon HD 3450, ATI FirePro V3700, ATI FireMV 2450,
    ATI FireMV 2260, ATI FireMV 2260, ATI Radeon HD 3600 Series,
    ATI Radeon HD 3650 AGP, ATI Radeon HD 3600 PRO,
    ATI Radeon HD 3600 XT, ATI Radeon HD 3600 PRO,
    ATI Mobility Radeon HD 3650, ATI Mobility Radeon HD 3670,
    ATI Mobility FireGL V5700, ATI Mobility FireGL V5725,
    ATI Radeon HD 3200 Graphics, ATI Radeon 3100 Graphics,
    ATI Radeon HD 3200 Graphics, ATI Radeon 3100 Graphics,
    ATI Radeon HD 3300 Graphics, ATI Radeon HD 3200 Graphics,
    ATI Radeon 3000 Graphics, SUMO, SUMO, SUMO2, SUMO2, SUMO2, SUMO2,
    SUMO, SUMO, SUMO, SUMO, SUMO, SUMO, SUMO, ATI Radeon HD 4200,
    ATI Radeon 4100, ATI Mobility Radeon HD 4200,
    ATI Mobility Radeon 4100, ATI Radeon HD 4290, ATI Radeon HD 4250,
    AMD Radeon HD 6310 Graphics, AMD Radeon HD 6310 Graphics,
    AMD Radeon HD 6250 Graphics, AMD Radeon HD 6250 Graphics,
    AMD Radeon HD 6300 Series Graphics,
    AMD Radeon HD 6200 Series Graphics, PALM, PALM, CYPRESS,
    ATI FirePro (FireGL) Graphics Adapter,
    ATI FirePro (FireGL) Graphics Adapter,
    ATI FirePro (FireGL) Graphics Adapter, AMD Firestream 9370,
    AMD Firestream 9350, ATI Radeon HD 5800 Series,
    ATI Radeon HD 5800 Series, ATI Radeon HD 5800 Series,
    ATI Radeon HD 5800 Series, ATI Radeon HD 5900 Series,
    ATI Radeon HD 5900 Series, ATI Mobility Radeon HD 5800 Series,
    ATI Mobility Radeon HD 5800 Series,
    ATI FirePro (FireGL) Graphics Adapter,
    ATI FirePro (FireGL) Graphics Adapter,
    ATI Mobility Radeon HD 5800 Series, ATI Radeon HD 5700 Series,
    ATI Radeon HD 5700 Series, ATI Radeon HD 6700 Series,
    ATI Radeon HD 5700 Series, ATI Radeon HD 6700 Series,
    ATI Mobility Radeon HD 5000 Series,
    ATI Mobility Radeon HD 5000 Series, ATI Mobility Radeon HD 5570,
    ATI FirePro (FireGL) Graphics Adapter,
    ATI FirePro (FireGL) Graphics Adapter, ATI Radeon HD 5670,
    ATI Radeon HD 5570, ATI Radeon HD 5500 Series, REDWOOD,
    ATI Mobility Radeon HD 5000 Series,
    ATI Mobility Radeon HD 5000 Series, ATI Mobility Radeon Graphics,
    ATI Mobility Radeon Graphics, CEDAR,
    ATI FirePro (FireGL) Graphics Adapter,
    ATI FirePro (FireGL) Graphics Adapter, ATI FirePro 2270, CEDAR,
    ATI Radeon HD 5450, CEDAR, CEDAR, CAYMAN, CAYMAN, CAYMAN, CAYMAN,
    CAYMAN, CAYMAN, CAYMAN, CAYMAN, CAYMAN, CAYMAN,
    AMD Radeon HD 6900 Series, AMD Radeon HD 6900 Series, CAYMAN, CAYMAN,
    CAYMAN, AMD Radeon HD 6900M Series, Mobility Radeon HD 6000 Series,
    BARTS, BARTS, Mobility Radeon HD 6000 Series,
    Mobility Radeon HD 6000 Series, BARTS, BARTS, BARTS, BARTS,
    AMD Radeon HD 6800 Series, AMD Radeon HD 6800 Series,
    AMD Radeon HD 6700 Series, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS,
    TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS,
    TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS,
    CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS,
    CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, ARUBA, ARUBA, ARUBA,
    ARUBA, ARUBA, ARUBA, ARUBA
    (++) using VT number 7
    (II) RADEON(0): TOTO SAYS 00000000f4100000
    (II) RADEON(0): MMIO registers at 0x00000000f4100000: size 64KB
    (II) RADEON(0): PCI bus 1 card 0 func 0
    (II) RADEON(0): Creating default Display subsection in Screen section
    "Default Screen Section" for depth/fbbpp 24/32
    (==) RADEON(0): Depth 24, (--) framebuffer bpp 32
    (II) RADEON(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
    (==) RADEON(0): Default visual is TrueColor
    (II) Loading /usr/lib/xorg/modules/libvgahw.so
    (II) Module vgahw: vendor="X.Org Foundation"
    compiled for 1.12.0, module version = 0.1.0
    (==) RADEON(0): RGB weight 888
    (II) RADEON(0): Using 8 bits per RGB (8 bit DAC)
    (--) RADEON(0): Chipset: "ATI Mobility Radeon 4500 Series" (ChipID = 0x9553)
    (--) RADEON(0): Linear framebuffer at 0x00000000e0000000
    (II) RADEON(0): PCIE card detected
    (II) Loading /usr/lib/xorg/modules/libint10.so
    (II) Module int10: vendor="X.Org Foundation"
    compiled for 1.12.0, module version = 1.0.0
    (II) RADEON(0): initializing int10
    (II) RADEON(0): Primary V_BIOS segment is: 0xc000
    (II) RADEON(0): ATOM BIOS detected
    (II) RADEON(0): ATOM BIOS Rom:
    SubsystemVendorID: 0x1179 SubsystemID: 0xfd50
    IOBaseAddress: 0xb000
    (II) RADEON(0): Framebuffer space used by Firmware (kb): 20
    (II) RADEON(0): Start of VRAM area used by Firmware: 0x7ffec
    (II) RADEON(0): AtomBIOS requests 20kB of VRAM scratch space
    (II) RADEON(0): AtomBIOS VRAM scratch base: 0x7ffec
    (II) RADEON(0): Cannot get VRAM scratch space. Allocating in main memory instead
    (II) RADEON(0): Default Engine Clock: 720000
    (II) RADEON(0): Default Memory Clock: 800000
    (II) RADEON(0): Maximum Pixel ClockPLL Frequency Output: 1200000
    (II) RADEON(0): Minimum Pixel ClockPLL Frequency Output: 0
    (II) RADEON(0): Maximum Pixel ClockPLL Frequency Input: 16000
    (II) RADEON(0): Minimum Pixel ClockPLL Frequency Input: 6000
    (II) RADEON(0): Maximum Pixel Clock: 400000
    (II) RADEON(0): Reference Clock: 27000
    (EE) RADEON(0): [dri] RADEONDRIGetVersion failed because of a version mismatch.
    [dri] This chipset requires a kernel module version of 1.17.0,
    [dri] but the kernel reports a version of 2.12.0.[dri] Make sure your module is loaded prior to starting X, and
    [dri] that this driver was built with support for KMS.
    [dri] Aborting.
    (II) Unloading int10
    (II) Unloading vgahw
    (EE) Screen(s) found, but none have a usable configuration.
    Fatal server error:
    no screens found
    Please consult the The X.Org Foundation support
    at http://wiki.x.org
    for help.
    Please also check the log file at "/var/log/Xorg.0.log" for additional information.
    Server terminated with error (1). Closing log file.
    GDM:5 log
    X.Org X Server 1.12.0
    Release Date: 2012-03-04
    X Protocol Version 11, Revision 0
    Build Operating System: Linux 3.2.9-1-ARCH i686
    Current Operating System: Linux zenith 3.2.13-1-ARCH #1 SMP PREEMPT Sat Mar 24 08:09:57 UTC 2012 i686
    Kernel command line: root=/dev/mapper/Zephyrion-root resume=/dev/mapper/Zephyrion-swap ro
    Build Date: 05 March 2012 06:02:28AM
    Current version of pixman: 0.24.4
    Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
    Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    (==) Log file: "/var/log/Xorg.5.log", Time: Thu Mar 29 18:22:36 2012
    (==) Using config directory: "/etc/X11/xorg.conf.d"
    (==) No Layout section. Using the first Screen section.
    (==) No screen section available. Using defaults.
    (**) |-->Screen "Default Screen Section" (0)
    (**) | |-->Monitor "<default monitor>"
    (==) No monitor specified for screen "Default Screen Section".
    Using a default monitor configuration.
    (==) Automatically adding devices
    (==) Automatically enabling devices
    (WW) The directory "/usr/share/fonts/OTF/" does not exist.
    Entry deleted from font path.
    (==) FontPath set to:
    /usr/share/fonts/misc/,
    /usr/share/fonts/TTF/,
    /usr/share/fonts/Type1/,
    /usr/share/fonts/100dpi/,
    /usr/share/fonts/75dpi/
    (==) ModulePath set to "/usr/lib/xorg/modules"
    (II) The server relies on udev to provide the list of input devices.
    If no devices become available, reconfigure udev or disable AutoAddDevices.
    (--) PCI:*(0:1:0:0) 1002:9553:1179:fd50 rev 0, Mem @ 0xe0000000/268435456, 0xf4100000/65536, I/O @ 0x0000b000/256, BIOS @ 0x????????/131072
    (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
    (II) Module extmod: vendor="X.Org Foundation"
    compiled for 1.12.0, module version = 1.0.0
    (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
    (II) Module dbe: vendor="X.Org Foundation"
    compiled for 1.12.0, module version = 1.0.0
    (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
    (II) Module glx: vendor="X.Org Foundation"
    compiled for 1.12.0, module version = 1.0.0
    (==) AIGLX enabled
    (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
    (II) Module record: vendor="X.Org Foundation"
    compiled for 1.12.0, module version = 1.13.0
    (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
    (II) Module dri: vendor="X.Org Foundation"
    compiled for 1.12.0, module version = 1.0.0
    (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
    (II) Module dri2: vendor="X.Org Foundation"
    compiled for 1.12.0, module version = 1.2.0
    (==) Matched ati as autoconfigured driver 0
    (==) Matched vesa as autoconfigured driver 1
    (==) Matched fbdev as autoconfigured driver 2
    (==) Assigned the driver to the xf86ConfigLayout
    (II) Loading /usr/lib/xorg/modules/drivers/ati_drv.so
    (II) Module ati: vendor="X.Org Foundation"
    compiled for 1.12.0, module version = 6.14.4
    (II) Loading /usr/lib/xorg/modules/drivers/radeon_drv.so
    (II) Module radeon: vendor="X.Org Foundation"
    compiled for 1.12.0, module version = 6.14.4
    (WW) Warning, couldn't open module vesa
    (II) Unloading vesa
    (EE) Failed to load module "vesa" (module does not exist, 0)
    (WW) Warning, couldn't open module fbdev
    (II) Unloading fbdev
    (EE) Failed to load module "fbdev" (module does not exist, 0)
    (II) RADEON: Driver for ATI Radeon chipsets:
    ATI Radeon Mobility X600 (M24) 3150 (PCIE), ATI FireMV 2400 (PCI),
    ATI Radeon Mobility X300 (M24) 3152 (PCIE),
    ATI FireGL M24 GL 3154 (PCIE), ATI FireMV 2400 3155 (PCI),
    ATI Radeon X600 (RV380) 3E50 (PCIE),
    ATI FireGL V3200 (RV380) 3E54 (PCIE), ATI Radeon IGP320 (A3) 4136,
    ATI Radeon IGP330/340/350 (A4) 4137, ATI Radeon 9500 AD (AGP),
    ATI Radeon 9500 AE (AGP), ATI Radeon 9600TX AF (AGP),
    ATI FireGL Z1 AG (AGP), ATI Radeon 9800SE AH (AGP),
    ATI Radeon 9800 AI (AGP), ATI Radeon 9800 AJ (AGP),
    ATI FireGL X2 AK (AGP), ATI Radeon 9600 AP (AGP),
    ATI Radeon 9600SE AQ (AGP), ATI Radeon 9600XT AR (AGP),
    ATI Radeon 9600 AS (AGP), ATI FireGL T2 AT (AGP), ATI Radeon 9650,
    ATI FireGL RV360 AV (AGP), ATI Radeon 7000 IGP (A4+) 4237,
    ATI Radeon 8500 AIW BB (AGP), ATI Radeon IGP320M (U1) 4336,
    ATI Radeon IGP330M/340M/350M (U2) 4337,
    ATI Radeon Mobility 7000 IGP 4437, ATI Radeon 9000/PRO If (AGP/PCI),
    ATI Radeon 9000 Ig (AGP/PCI), ATI Radeon X800 (R420) JH (AGP),
    ATI Radeon X800PRO (R420) JI (AGP),
    ATI Radeon X800SE (R420) JJ (AGP), ATI Radeon X800 (R420) JK (AGP),
    ATI Radeon X800 (R420) JL (AGP), ATI FireGL X3 (R420) JM (AGP),
    ATI Radeon Mobility 9800 (M18) JN (AGP),
    ATI Radeon X800 SE (R420) (AGP), ATI Radeon X800XT (R420) JP (AGP),
    ATI Radeon X800 VE (R420) JT (AGP), ATI Radeon X850 (R480) (AGP),
    ATI Radeon X850 XT (R480) (AGP), ATI Radeon X850 SE (R480) (AGP),
    ATI Radeon X850 PRO (R480) (AGP), ATI Radeon X850 XT PE (R480) (AGP),
    ATI Radeon Mobility M7 LW (AGP),
    ATI Mobility FireGL 7800 M7 LX (AGP),
    ATI Radeon Mobility M6 LY (AGP), ATI Radeon Mobility M6 LZ (AGP),
    ATI FireGL Mobility 9000 (M9) Ld (AGP),
    ATI Radeon Mobility 9000 (M9) Lf (AGP),
    ATI Radeon Mobility 9000 (M9) Lg (AGP), ATI FireMV 2400 PCI,
    ATI Radeon 9700 Pro ND (AGP), ATI Radeon 9700/9500Pro NE (AGP),
    ATI Radeon 9600TX NF (AGP), ATI FireGL X1 NG (AGP),
    ATI Radeon 9800PRO NH (AGP), ATI Radeon 9800 NI (AGP),
    ATI FireGL X2 NK (AGP), ATI Radeon 9800XT NJ (AGP),
    ATI Radeon Mobility 9600/9700 (M10/M11) NP (AGP),
    ATI Radeon Mobility 9600 (M10) NQ (AGP),
    ATI Radeon Mobility 9600 (M11) NR (AGP),
    ATI Radeon Mobility 9600 (M10) NS (AGP),
    ATI FireGL Mobility T2 (M10) NT (AGP),
    ATI FireGL Mobility T2e (M11) NV (AGP), ATI Radeon QD (AGP),
    ATI Radeon QE (AGP), ATI Radeon QF (AGP), ATI Radeon QG (AGP),
    ATI FireGL 8700/8800 QH (AGP), ATI Radeon 8500 QL (AGP),
    ATI Radeon 9100 QM (AGP), ATI Radeon 7500 QW (AGP/PCI),
    ATI Radeon 7500 QX (AGP/PCI), ATI Radeon VE/7000 QY (AGP/PCI),
    ATI Radeon VE/7000 QZ (AGP/PCI), ATI ES1000 515E (PCI),
    ATI Radeon Mobility X300 (M22) 5460 (PCIE),
    ATI Radeon Mobility X600 SE (M24C) 5462 (PCIE),
    ATI FireGL M22 GL 5464 (PCIE), ATI Radeon X800 (R423) UH (PCIE),
    ATI Radeon X800PRO (R423) UI (PCIE),
    ATI Radeon X800LE (R423) UJ (PCIE),
    ATI Radeon X800SE (R423) UK (PCIE),
    ATI Radeon X800 XTP (R430) (PCIE), ATI Radeon X800 XL (R430) (PCIE),
    ATI Radeon X800 SE (R430) (PCIE), ATI Radeon X800 (R430) (PCIE),
    ATI FireGL V7100 (R423) (PCIE), ATI FireGL V5100 (R423) UQ (PCIE),
    ATI FireGL unknown (R423) UR (PCIE),
    ATI FireGL unknown (R423) UT (PCIE),
    ATI Mobility FireGL V5000 (M26) (PCIE),
    ATI Mobility FireGL V5000 (M26) (PCIE),
    ATI Mobility Radeon X700 XL (M26) (PCIE),
    ATI Mobility Radeon X700 (M26) (PCIE),
    ATI Mobility Radeon X700 (M26) (PCIE),
    ATI Radeon X550XTX 5657 (PCIE), ATI Radeon 9100 IGP (A5) 5834,
    ATI Radeon Mobility 9100 IGP (U3) 5835,
    ATI Radeon XPRESS 200 5954 (PCIE),
    ATI Radeon XPRESS 200M 5955 (PCIE), ATI Radeon 9250 5960 (AGP),
    ATI Radeon 9200 5961 (AGP), ATI Radeon 9200 5962 (AGP),
    ATI Radeon 9200SE 5964 (AGP), ATI FireMV 2200 (PCI),
    ATI ES1000 5969 (PCI), ATI Radeon XPRESS 200 5974 (PCIE),
    ATI Radeon XPRESS 200M 5975 (PCIE),
    ATI Radeon XPRESS 200 5A41 (PCIE),
    ATI Radeon XPRESS 200M 5A42 (PCIE),
    ATI Radeon XPRESS 200 5A61 (PCIE),
    ATI Radeon XPRESS 200M 5A62 (PCIE),
    ATI Radeon X300 (RV370) 5B60 (PCIE),
    ATI Radeon X600 (RV370) 5B62 (PCIE),
    ATI Radeon X550 (RV370) 5B63 (PCIE),
    ATI FireGL V3100 (RV370) 5B64 (PCIE),
    ATI FireMV 2200 PCIE (RV370) 5B65 (PCIE),
    ATI Radeon Mobility 9200 (M9+) 5C61 (AGP),
    ATI Radeon Mobility 9200 (M9+) 5C63 (AGP),
    ATI Mobility Radeon X800 XT (M28) (PCIE),
    ATI Mobility FireGL V5100 (M28) (PCIE),
    ATI Mobility Radeon X800 (M28) (PCIE), ATI Radeon X850 5D4C (PCIE),
    ATI Radeon X850 XT PE (R480) (PCIE),
    ATI Radeon X850 SE (R480) (PCIE), ATI Radeon X850 PRO (R480) (PCIE),
    ATI unknown Radeon / FireGL (R480) 5D50 (PCIE),
    ATI Radeon X850 XT (R480) (PCIE),
    ATI Radeon X800XT (R423) 5D57 (PCIE),
    ATI FireGL V5000 (RV410) (PCIE), ATI Radeon X700 XT (RV410) (PCIE),
    ATI Radeon X700 PRO (RV410) (PCIE),
    ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X700 (RV410) (PCIE),
    ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X1800,
    ATI Mobility Radeon X1800 XT, ATI Mobility Radeon X1800,
    ATI Mobility FireGL V7200, ATI FireGL V7200, ATI FireGL V5300,
    ATI Mobility FireGL V7100, ATI Radeon X1800, ATI Radeon X1800,
    ATI Radeon X1800, ATI Radeon X1800, ATI Radeon X1800,
    ATI FireGL V7300, ATI FireGL V7350, ATI Radeon X1600, ATI RV505,
    ATI Radeon X1300/X1550, ATI Radeon X1550, ATI M54-GL,
    ATI Mobility Radeon X1400, ATI Radeon X1300/X1550,
    ATI Radeon X1550 64-bit, ATI Mobility Radeon X1300,
    ATI Mobility Radeon X1300, ATI Mobility Radeon X1300,
    ATI Mobility Radeon X1300, ATI Radeon X1300, ATI Radeon X1300,
    ATI RV505, ATI RV505, ATI FireGL V3300, ATI FireGL V3350,
    ATI Radeon X1300, ATI Radeon X1550 64-bit, ATI Radeon X1300/X1550,
    ATI Radeon X1600, ATI Radeon X1300/X1550, ATI Mobility Radeon X1450,
    ATI Radeon X1300/X1550, ATI Mobility Radeon X2300,
    ATI Mobility Radeon X2300, ATI Mobility Radeon X1350,
    ATI Mobility Radeon X1350, ATI Mobility Radeon X1450,
    ATI Radeon X1300, ATI Radeon X1550, ATI Mobility Radeon X1350,
    ATI FireMV 2250, ATI Radeon X1550 64-bit, ATI Radeon X1600,
    ATI Radeon X1650, ATI Radeon X1600, ATI Radeon X1600,
    ATI Mobility FireGL V5200, ATI Mobility Radeon X1600,
    ATI Radeon X1650, ATI Radeon X1650, ATI Radeon X1600,
    ATI Radeon X1300 XT/X1600 Pro, ATI FireGL V3400,
    ATI Mobility FireGL V5250, ATI Mobility Radeon X1700,
    ATI Mobility Radeon X1700 XT, ATI FireGL V5200,
    ATI Mobility Radeon X1700, ATI Radeon X2300HD,
    ATI Mobility Radeon HD 2300, ATI Mobility Radeon HD 2300,
    ATI Radeon X1950, ATI Radeon X1900, ATI Radeon X1950,
    ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
    ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
    ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
    ATI AMD Stream Processor, ATI Radeon X1900, ATI Radeon X1950,
    ATI RV560, ATI RV560, ATI Mobility Radeon X1900, ATI RV560,
    ATI Radeon X1950 GT, ATI RV570, ATI RV570, ATI FireGL V7400,
    ATI RV560, ATI Radeon X1650, ATI Radeon X1650, ATI RV560,
    ATI Radeon 9100 PRO IGP 7834, ATI Radeon Mobility 9200 IGP 7835,
    ATI Radeon X1200, ATI Radeon X1200, ATI Radeon X1200,
    ATI Radeon X1200, ATI Radeon X1200, ATI RS740, ATI RS740M, ATI RS740,
    ATI RS740M, ATI Radeon HD 2900 XT, ATI Radeon HD 2900 XT,
    ATI Radeon HD 2900 XT, ATI Radeon HD 2900 Pro, ATI Radeon HD 2900 GT,
    ATI FireGL V8650, ATI FireGL V8600, ATI FireGL V7600,
    ATI Radeon 4800 Series, ATI Radeon HD 4870 x2,
    ATI Radeon 4800 Series, ATI Radeon HD 4850 x2,
    ATI FirePro V8750 (FireGL), ATI FirePro V7760 (FireGL),
    ATI Mobility RADEON HD 4850, ATI Mobility RADEON HD 4850 X2,
    ATI Radeon 4800 Series, ATI FirePro RV770, AMD FireStream 9270,
    AMD FireStream 9250, ATI FirePro V8700 (FireGL),
    ATI Mobility RADEON HD 4870, ATI Mobility RADEON M98,
    ATI Mobility RADEON HD 4870, ATI Radeon 4800 Series,
    ATI Radeon 4800 Series, ATI FirePro M7750, ATI M98, ATI M98, ATI M98,
    ATI Mobility Radeon HD 4650, ATI Radeon RV730 (AGP),
    ATI Mobility Radeon HD 4670, ATI FirePro M5750,
    ATI Mobility Radeon HD 4670, ATI Radeon RV730 (AGP),
    ATI RV730XT [Radeon HD 4670], ATI RADEON E4600,
    ATI Radeon HD 4600 Series, ATI RV730 PRO [Radeon HD 4650],
    ATI FirePro V7750 (FireGL), ATI FirePro V5700 (FireGL),
    ATI FirePro V3750 (FireGL), ATI Mobility Radeon HD 4830,
    ATI Mobility Radeon HD 4850, ATI FirePro M7740, ATI RV740,
    ATI Radeon HD 4770, ATI Radeon HD 4700 Series, ATI Radeon HD 4770,
    ATI FirePro M5750, ATI RV610, ATI Radeon HD 2400 XT,
    ATI Radeon HD 2400 Pro, ATI Radeon HD 2400 PRO AGP, ATI FireGL V4000,
    ATI RV610, ATI Radeon HD 2350, ATI Mobility Radeon HD 2400 XT,
    ATI Mobility Radeon HD 2400, ATI RADEON E2400, ATI RV610,
    ATI FireMV 2260, ATI RV670, ATI Radeon HD3870,
    ATI Mobility Radeon HD 3850, ATI Radeon HD3850,
    ATI Mobility Radeon HD 3850 X2, ATI RV670,
    ATI Mobility Radeon HD 3870, ATI Mobility Radeon HD 3870 X2,
    ATI Radeon HD3870 X2, ATI FireGL V7700, ATI Radeon HD3850,
    ATI Radeon HD3690, AMD Firestream 9170, ATI Radeon HD 4550,
    ATI Radeon RV710, ATI Radeon RV710, ATI Radeon RV710,
    ATI Radeon HD 4350, ATI Mobility Radeon 4300 Series,
    ATI Mobility Radeon 4500 Series, ATI Mobility Radeon 4500 Series,
    ATI FirePro RG220, ATI Mobility Radeon 4330, ATI RV630,
    ATI Mobility Radeon HD 2600, ATI Mobility Radeon HD 2600 XT,
    ATI Radeon HD 2600 XT AGP, ATI Radeon HD 2600 Pro AGP,
    ATI Radeon HD 2600 XT, ATI Radeon HD 2600 Pro, ATI Gemini RV630,
    ATI Gemini Mobility Radeon HD 2600 XT, ATI FireGL V5600,
    ATI FireGL V3600, ATI Radeon HD 2600 LE,
    ATI Mobility FireGL Graphics Processor, ATI Radeon HD 3470,
    ATI Mobility Radeon HD 3430, ATI Mobility Radeon HD 3400 Series,
    ATI Radeon HD 3450, ATI Radeon HD 3450, ATI Radeon HD 3430,
    ATI Radeon HD 3450, ATI FirePro V3700, ATI FireMV 2450,
    ATI FireMV 2260, ATI FireMV 2260, ATI Radeon HD 3600 Series,
    ATI Radeon HD 3650 AGP, ATI Radeon HD 3600 PRO,
    ATI Radeon HD 3600 XT, ATI Radeon HD 3600 PRO,
    ATI Mobility Radeon HD 3650, ATI Mobility Radeon HD 3670,
    ATI Mobility FireGL V5700, ATI Mobility FireGL V5725,
    ATI Radeon HD 3200 Graphics, ATI Radeon 3100 Graphics,
    ATI Radeon HD 3200 Graphics, ATI Radeon 3100 Graphics,
    ATI Radeon HD 3300 Graphics, ATI Radeon HD 3200 Graphics,
    ATI Radeon 3000 Graphics, SUMO, SUMO, SUMO2, SUMO2, SUMO2, SUMO2,
    SUMO, SUMO, SUMO, SUMO, SUMO, SUMO, SUMO, ATI Radeon HD 4200,
    ATI Radeon 4100, ATI Mobility Radeon HD 4200,
    ATI Mobility Radeon 4100, ATI Radeon HD 4290, ATI Radeon HD 4250,
    AMD Radeon HD 6310 Graphics, AMD Radeon HD 6310 Graphics,
    AMD Radeon HD 6250 Graphics, AMD Radeon HD 6250 Graphics,
    AMD Radeon HD 6300 Series Graphics,
    AMD Radeon HD 6200 Series Graphics, PALM, PALM, CYPRESS,
    ATI FirePro (FireGL) Graphics Adapter,
    ATI FirePro (FireGL) Graphics Adapter,
    ATI FirePro (FireGL) Graphics Adapter, AMD Firestream 9370,
    AMD Firestream 9350, ATI Radeon HD 5800 Series,
    ATI Radeon HD 5800 Series, ATI Radeon HD 5800 Series,
    ATI Radeon HD 5800 Series, ATI Radeon HD 5900 Series,
    ATI Radeon HD 5900 Series, ATI Mobility Radeon HD 5800 Series,
    ATI Mobility Radeon HD 5800 Series,
    ATI FirePro (FireGL) Graphics Adapter,
    ATI FirePro (FireGL) Graphics Adapter,
    ATI Mobility Radeon HD 5800 Series, ATI Radeon HD 5700 Series,
    ATI Radeon HD 5700 Series, ATI Radeon HD 6700 Series,
    ATI Radeon HD 5700 Series, ATI Radeon HD 6700 Series,
    ATI Mobility Radeon HD 5000 Series,
    ATI Mobility Radeon HD 5000 Series, ATI Mobility Radeon HD 5570,
    ATI FirePro (FireGL) Graphics Adapter,
    ATI FirePro (FireGL) Graphics Adapter, ATI Radeon HD 5670,
    ATI Radeon HD 5570, ATI Radeon HD 5500 Series, REDWOOD,
    ATI Mobility Radeon HD 5000 Series,
    ATI Mobility Radeon HD 5000 Series, ATI Mobility Radeon Graphics,
    ATI Mobility Radeon Graphics, CEDAR,
    ATI FirePro (FireGL) Graphics Adapter,
    ATI FirePro (FireGL) Graphics Adapter, ATI FirePro 2270, CEDAR,
    ATI Radeon HD 5450, CEDAR, CEDAR, CAYMAN, CAYMAN, CAYMAN, CAYMAN,
    CAYMAN, CAYMAN, CAYMAN, CAYMAN, CAYMAN, CAYMAN,
    AMD Radeon HD 6900 Series, AMD Radeon HD 6900 Series, CAYMAN, CAYMAN,
    CAYMAN, AMD Radeon HD 6900M Series, Mobility Radeon HD 6000 Series,
    BARTS, BARTS, Mobility Radeon HD 6000 Series,
    Mobility Radeon HD 6000 Series, BARTS, BARTS, BARTS, BARTS,
    AMD Radeon HD 6800 Series, AMD Radeon HD 6800 Series,
    AMD Radeon HD 6700 Series, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS,
    TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS,
    TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS,
    CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS,
    CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, ARUBA, ARUBA, ARUBA,
    ARUBA, ARUBA, ARUBA, ARUBA
    (++) using VT number 7
    (II) RADEON(0): TOTO SAYS 00000000f4100000
    (II) RADEON(0): MMIO registers at 0x00000000f4100000: size 64KB
    (II) RADEON(0): PCI bus 1 card 0 func 0
    (II) RADEON(0): Creating default Display subsection in Screen section
    "Default Screen Section" for depth/fbbpp 24/32
    (==) RADEON(0): Depth 24, (--) framebuffer bpp 32
    (II) RADEON(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
    (==) RADEON(0): Default visual is TrueColor
    (II) Loading /usr/lib/xorg/modules/libvgahw.so
    (II) Module vgahw: vendor="X.Org Foundation"
    compiled for 1.12.0, module version = 0.1.0
    (==) RADEON(0): RGB weight 888
    (II) RADEON(0): Using 8 bits per RGB (8 bit DAC)
    (--) RADEON(0): Chipset: "ATI Mobility Radeon 4500 Series" (ChipID = 0x9553)
    (--) RADEON(0): Linear framebuffer at 0x00000000e0000000
    (II) RADEON(0): PCIE card detected
    (II) Loading /usr/lib/xorg/modules/libint10.so
    (II) Module int10: vendor="X.Org Foundation"
    compiled for 1.12.0, module version = 1.0.0
    (II) RADEON(0): initializing int10
    (II) RADEON(0): Primary V_BIOS segment is: 0xc000
    (II) RADEON(0): ATOM BIOS detected
    (II) RADEON(0): ATOM BIOS Rom:
    SubsystemVendorID: 0x1179 SubsystemID: 0xfd50
    IOBaseAddress: 0xb000
    (II) RADEON(0): Framebuffer space used by Firmware (kb): 20
    (II) RADEON(0): Start of VRAM area used by Firmware: 0x7ffec
    (II) RADEON(0): AtomBIOS requests 20kB of VRAM scratch space
    (II) RADEON(0): AtomBIOS VRAM scratch base: 0x7ffec
    (II) RADEON(0): Cannot get VRAM scratch space. Allocating in main memory instead
    (II) RADEON(0): Default Engine Clock: 720000
    (II) RADEON(0): Default Memory Clock: 800000
    (II) RADEON(0): Maximum Pixel ClockPLL Frequency Output: 1200000
    (II) RADEON(0): Minimum Pixel ClockPLL Frequency Output: 0
    (II) RADEON(0): Maximum Pixel ClockPLL Frequency Input: 16000
    (II) RADEON(0): Minimum Pixel ClockPLL Frequency Input: 6000
    (II) RADEON(0): Maximum Pixel Clock: 400000
    (II) RADEON(0): Reference Clock: 27000
    (EE) RADEON(0): [dri] RADEONDRIGetVersion failed because of a version mismatch.
    [dri] This chipset requires a kernel module version of 1.17.0,
    [dri] but the kernel reports a version of 2.12.0.[dri] Make sure your module is loaded prior to starting X, and
    [dri] that this driver was built with support for KMS.
    [dri] Aborting.
    (II) Unloading int10
    (II) Unloading vgahw
    (EE) Screen(s) found, but none have a usable configuration.
    Fatal server error:
    no screens found
    Please consult the The X.Org Foundation support
    at http://wiki.x.org
    for help.
    Please also check the log file at "/var/log/Xorg.5.log" for additional information.
    Server terminated with error (1). Closing log file.
    I should note that it was working fine before installing qemu, but I doubt that the installation of qemu is what caused this.
    EDIT: I should also note that I am running Arch as the host system, not running Arch with qemu (which is what I've seen similar errors address)
    Last edited by ZMoore (2012-03-30 17:45:31)

    [ 44.679] (EE) RADEON(0): [dri] RADEONDRIGetVersion failed because of a version mismatch.
    [dri] This chipset requires a kernel module version of 1.17.0,
    [dri] but the kernel reports a version of 2.12.0.[dri] Make sure your module is loaded prior to starting X, and
    [dri] that this driver was built with support for KMS.
    [dri] Aborting.
    Make sure you're actually up to date...

  • Static/crackling freezes/shuts down Toshiba L300 (already cleaned fan/heat sink)

    Was slightly intermittent but pretty much unable to use the computer at this point. The only clues I can give is that there seemed to be 2 errors about usb so wondering if that could cause the static build up that freezes the computer? One was on shut down and the other was after static started and it seemed to be trying to grab a driver (for usb I think) almost as though the device disappeared but then the laptop froze. It wasn't too long ago one of three ports wasn't working but they all work recently (don't recall which one quit for a bit).
    Unfortunately I need to fix it myself due to finances. How do I physically disconnect all the usb ports to rule them out? I probably did this when I took out the motherboard to clean the fan/heat sink but I don't know for sure which connection(s) they were.
    If I'm way off please provide other suggestions. I REALLY appreciate any help given. 

    first off, please provide the entire model number of your computer.  It is printed on the bottom.  do not provide s/n.
    Do you have a backup of all your personal data?  If not, I would say that should be your priority at this point. 
    After that has been dealt with, the next question is "did you make restore disks when computer was still working?" 
    Can you get into recovery menu (spamming f8 on start up).  If so, try going into safe mode and restoring the computer to a restore point at a point in time before the problems started. 
    When you cleaned fan/heat sink, did you reseat the heatsink.  If not, you may want to open it back up and reseat the heatsink (i.e., remove old thermal paste and reapply). 
    L305-S5955, T9300 Intel Core 2 Duo, 4GB RAM, 60GB SSD, Win 7 Ultimate 64-bit

  • Mac mini display flickers after update to 10.9.5

    It's very annoying especially in Safari when i try to scroll my page. I've tried SMC restrat and NVRAM reset, also HDMI disconetion and changing display resolution wont help with this problem.

    Thanks for Your help guys:) And dozens of replys:) If somebody will have simillar problem I can only say that after clean reinstall to 10.9.4 everything works as brand new. I highlly advice not to upgrade to 10.9.5 if You have mac mini with intel HD 4000 and external HDMI display.
    One more time thanks fro Your help and many replys:)

  • Which MacBook Pros are safe to buy used and not recalled for video graphics/display failure (due to overheating)?

    I've had some bad luck with MacBook Pros lately. I bought a 2010 model but it was effectively a Total Loss because of a vehicle accident. From searching with Google, people have reported logic board failures. Who knows if mine would've failed, too.
    Then I bought an older 2009 MacBook Pro and that eventually failed due to the graphics chip failure. There was a recall on it but the problem occured JUST after the recall period expired. I don't have a microwave solder lying around or a proper setup to fix the problem myself.
    Now, I im in the market for a used MacBook Pro, as a gift (I can't afford a new one right now) (with the luck I have, I'm basically done with them but the person wants one).
    I've seen some 2011 models priced quite attractively, which caused me to do a quick check and find that the (early) 2011 models also have video graphic failures. I don't get it. I understand paying for the name, but the name also has to have reliability and you don't hear about video graphics failures from some of the more well known PC manufacturers..just saying.
    I'd strongly prefer to not purchase any retina models, if at all possible. I want a mechanical SATA HDD and an optical drive. I oppose proprietary components -- as I understand it, the retina models make it nearly impossible to upgrade.
    Which used MacBook Pros are safe for purchase? In other words, which ones do not have recalls or are susceptible to video graphics/display failures? I don't want to put the money down for one, only to hear it kicked the bucket and it needs service and is out of warranty.
    Thank you for your time.

    WindowsGreaterThanUnix wrote:
    I've seen some 2011 models priced quite attractively, which caused me to do a quick check and find that the (early) 2011 models also have video graphic failures.
    I have an early 2011 MBP and have haad zero problems since it was new.

  • Second iphone 6 with the same display failure

    Two new iPhone 6 (16Gb gold) purchased on different dates have display failures within 10 days!  The display will suddenly show blue and white verticle lines over the whole screen. One phone had totally display failure (no image) after power off / on.  The other phone intermittently had the issue about every 10 minutes until replaced. 

    If you set up the second device using a back up fro the first, you may try setting it up as a new device. Otherwise return it.

  • MacBook Pro 13" (2011 late). second display problem after update

    Updated to mountain lion this second and there is no signal out (thunderbolt to displayport cable) since ive upgraded. in lion there are no problems.  does your external display work after upgrade to mountain lion?
    (monitor HP ZR24w)

    Does your Macbook Flash Blue at all? I have the same thing, and it won't even flash blue

  • Video Or Graphic Card Driver Problem After Clean And Re-Install Windows 7 32-bit

    Video Or Graphic Card Driver Problem After Clean And Re-Install Windows 7 32-bit I m Tired I m Finding & Finding Drivers
    But I Wont be Able To Play Games & Other Apps  Please Solve This And Give Me Link For Video Card Driver Or
    Graphic Card Driver For Windows 7 32-bit (x86)
    THANKS
    PROFESSOR TOM........................................

    Hi:
    See if this W7 32 bit graphics driver works...
    http://h10025.www1.hp.com/ewfrf/wc/softwareDownloa​dIndex?softwareitem=ob-100029-2&cc=us&dlc=en&lc=en​...

Maybe you are looking for