T61 display problems - garbling and worse

For the past week I've been having problems with the display on my T61. At first it would just freeze for a few seconds and then tell me that nvlddmkm stopped responding and has recovered, then sometimes it would freeze up completely and show me weird snowy patches. Updating my display driver (NVIDIA quadro NVS M140) seems, if anything, to have made things worse, since display became garbled immediately from startup (when it presumably isn't even using the new display driver), though it did sometimes show something resembling what should be on the screen instead of just snowy patches. Once I managed to see through the snow to uninstall my driver, and then I went back to just having these nvlddmkm recoveries and occasional freezes, but when I updated BIOS and my display drivers, it went back to garbling everything, beginning at startup. Any ideas?

Your GPU is about to fail. Hopefully you got warranty.
Regards,
Jin Li
May this year, be the year of 'DO'!
I am a volunteer, and not a paid staff of Lenovo or Microsoft

Similar Messages

Having some problems with t61 display problems..

i am using a intergrated graphic card for the t61...
but what i dont understand is when i install the latest drivers through lenovo download site for the graphic card, there will be some display problems when i set to screen resolution to 800x600 or 1024 the whole screen will tend to be very small and not stretch properly according the the screen..
however i uninstall the latest drivers and went to intel to install the older drivers for the intergrated gfx.. after that everyday work properly..
when i had the latest drivers when i play games like warcraft or counterstrike the screen will also go very small however after using the old graphic card, the problem did not occur... can anyone tell me how do i install the latest drivers because i believe the older driver is not really expanding the gfx to the max.. thanks..

random reboots are quite common
try updating the software before you do anything else.
If i have helped at all a click on the white star below would be nice thanks.
Now using the Lumia 1520

T61 Display Problem and Annoying Noise from ESC button area

I have two problems with my T61, model 6460-66U. One's with display and another is annoying noise coming from ESC button area.
Ordered in Feb, 2008 for college use, as soon as I start to use it there's some problem with the display quality. When using Aero there would be black square spots appearing on screen and would disappear when hovering mouse over these areas. Processing speed is somewhat slow when using Aero. While switching to Basic Vista style, those black square spots will only appear in the Windows Photo Gallery's left corner, like the image shows: http://farm4.static.flickr.com/3149/2746362257_6dc6a4d6a2_o.jpg When playing videos, like avi, rmvb, wmv files, there's a common problem that the screen in the media player keeps flashing with the green color. I thought it was the RAM, because it's 1G so it got upgraded to 3G over summer break. Hoping the problem would be solved, but not . Recover the system back to factory status helps a little, but after upgrading the newest driver (7.15.11.7597) of Nvidia 140m there would be sudden black out on screen, and notice of display driver stopped working. When degrade to 7.15.11.129 version it runs fairly well but problem with Photo Gallery and videos as mentioned above still exist. I found a Korean media player which could fix the video playing problem, but with Windows Media player, Realplayer and other major video player the problem still exists. Screenshot of the problem is here http://farm4.static.flickr.com/3087/2746362307_aff12c556c_o.jpg I upgraded BIOS, but laptop would become slow and video images would blur/double shadows. So I swtiched it back.
And recent few days, there's annoying noise coming from in the upper left corner, where ESC button is. I don't know whether it's from the fan or the AC adapter, it's like Zssssss, and if I press my finger on it, the noise would be a little louder. There's a similar problem that I noticed in the first few weeks with the experience of this laptop, whenever I maximize the volume (both volume control of computer and the music player), some annoying noise, which is similar to this Zsss sound but louder will buzzing along with music. Didn't care much about that since if I don't maximize the volume it would just be fine. But this time the whining noise won't disappear. What probably cause this? Anyway to fix it, like replacing certain parts??
Suggessions and help would be very much appreciated. Thanks!!
Original description: T7300(2GHz), 1GB RAM, 160GB 5400rpm HD, 15.4in 1680x1050 LCD, 128MB nVIDIA Quadro NVS 140M, CDRW/DVDRW, Intel 802.11agn, Bluetooth, Modem, 1Gb Ethernet, UltraNav, Secure chip, Fingerprint reader, Intel Turbo Memory, 6c Li-Ion, WinVista Business
Message Edited by dream on 08-09-2008 09:35 AM
Message Edited by dream on 08-09-2008 09:38 AM

Dirt can get under the button in an instant.
I use a strong suction vacuum cleaner and tip the computer from side to side and upside down while clicking the button to suck out the dirt.

T61 display problem on both Internal and External monitors

Hi,
I have Lenovo T61 of Type 7662, Model CTO. One month back the right hinge of my laptop has broken. Now the display on the screen is not at all readable. If I reboot the laptop, it is getting loaded, but the display on the screen is not readable and also it is displaying 4 windows without any clear visibility.
I thought the problem may be with the LCD cable under Right hinge. So, I tried to check this with an external monitor. But, the same problem is occurring on the external monitor also. So, I couldn't find what exactly the problem is. If anybody has this kind of problem, please help me on fixing this issue.
Thanks,
RamPap.

well the GPU issue is fixable under free repair, but given that your hinge is broken, not sure whether the free warranty applies in this case.
Basically you need a new motherboard.
Also, can you post a picture of the condition of the hinge? (upload it to tinypic or flickr, then link it here).
Regards,
Jin Li
May this year, be the year of 'DO'!
I am a volunteer, and not a paid staff of Lenovo or Microsoft

Why some PDF docs displayed are garbled and others are not?

I've had this love hate relationship with adobe for the past few days. I'm so frustrated since I can't seem to figure why other pdf docs display information correctly while others are garbled. It looks as if the letters/text overlap. I 'm loosing sleep over this. I'm at my wits end. Can someone please help? I appreciate any assistance you can provide.
Thanks,
C

Hi Allegria11,
Don't lose sleep over Adobe! Let's see what we can figure out. But I have lots of questions to get us started:
Are you creating the PDFs yourself, or viewing PDFs from different sources?
What are you using to view the PDFs (Reader, Acrobat, and what versions)?
Do these PDFs all use the same fonts, or different ones?
Do you know whether the fonts are embedded/subsetted in the PDFs? (You can check by choosing File > Properties and clicking the Fonts tab.
Let's start there, and we will dig deeper if none of these shed any light on the problem.
Best,
Sara

T61 Display problems

Hello everybody. Just got myself a T61 as my good old T30 wasn't cutting it anynore. Love the new machine but have a question about the display. It has the Nvidia quadro nvs 140m. When I have it set at the highest resolution (1680x1050) it displays fine but everything is a little too small for my taste. If I reduce the resolution then the display gets kind of distorted. Also the windows task bar icons have rough edges. I have selected the bigger fonts in the windows (120dpi). I tried pretty well every resolution setting and it just seems to get worse as I go lower. The only "crisp" setting seems to be the highest. If that's the way it is then what is the purpose of having different resolution settings? Can anyone please help? Thanks in advance.....

Hello bulunmaz, welcome to our forums!
LCD-Displays have a so called native resolution. All other resolutions seems to be distorted in a way.
That´s not a defect, it is working as designed. You can use windows to adjust your fonts.
By the way Vista is better in this regard, as XP is.
The rough edges on your taskbar aims to a 16bit colour graphics settings.
Please choose 32bit colour in Nvidia or win control panel.
Follow @LenovoForums on Twitter! Try the forum search, before first posting: Forum Search Option
Please insert your type, model (not S/N) number and used OS in your posts.
I´m a volunteer here using New X1 Carbon, ThinkPad Yoga, Yoga 11s, Yoga 13, T430s,T510, X220t, IdeaCentre B540.
TIP: If your computer runs satisfactorily now, it may not be necessary to update the system.
English Community Deutsche Community Comunidad en Español

Display problem - brightness and grey area

My 24" iMAC has been suffering with a grey section (middle vertical third of screen) on start-up. This lasts for 5-10 minutes, after which time the middle section resumes its normal brightness. Recently, I've noticed another problem and that is there is very little difference on the screen between the brightness at its lowest level and when it is at its highest. What has happened?

Same problem here (with a Mac Mini 2009 model with the same nvidia chip as your aluminum MacBook) and a LG L204WT 20" monitor. Although on my LG monitor, if I reduce the sharpness setting one step (from 5 to 4), the flickering completely stops. This does make the display slightly fuzzier, but it feels better to my eyes than the flickering. Can you test this on your monitor also, and tell me if it helps?
Regards,
Enforce

T61 display problem

When I use computer watching the movies, the screen became twinkling,then the color turn pink and the computer frozen. I restart the computer, there are lots of vertical lines on the screen, even can't see the THINKPAD logo. Try several times, enter the operating system, but after run some programs, the problem heaped again.
This is already the third time computer became this, the last two times, I sent my computer to IBM for repair, they change the system board. It's just 1 month since the last repair.
I'm very confused about this, the computer has been repaired twice as the same problem, but just one month, the same problem occurs again. I'm worry about whether they can repair my computer totally good.

those vertical lines may not be anything to worry about since contemporary video controllers are equipped with miniscule amounts of cache RAM for increased performance.
Restarting the system, even shutting it down for a few seconds before restarting can still resurrect video images from the cache which isn't as stable to CF but still has enough structure to retain those fossilized images even if just brifely at powerup.
This phenomonem of "ghost remnants" is a growing area of interest for the Internet Security / Data Forensic profession who are working to develop better and more utiltiies to retrieve these fragments since depending on the situatio, ...it is possible to retriev passwords in a vulnerable and unprotected twilight between boot up and shutdown.
Before you try sending it in again, consider booting an entirely separate OS such as KNOPPIX LIVE edition which should support all of your drivers inclduing vid and audio and it includes a dvd decoder function.
If you have only one CD the Ultrabay, then start knoppix with a copy to ram switch when you see the system start, type the following without quotes:
knoppix copy2ram or
knoppix copytoram
Give it a few minutes as the CD vaccums up about 700MB of RAM to use a virtual disk, eject itself and automatically logon. it is a better idea to remain disconnected from any network when executing this step since the Knoppix distro could ve vulnerable to a new hack of if the authors failed to patch it.
Play any of the problematic DVD's inside this LINUX environment to see if the problem recurs, if the promblem persists then it is time to iniatea another repair ticket.
Don't just sit there, take a second and use the Kudo's button to compliment the people who help you.

Display problem, and maybe worse

On startup this morning my iMac (PowerPC) G5 display began behaving very strangely. The screen is displaying my usual desktop picture, dock and icons, and finder window. Applications are running, but very oddly.
The screen is covered in small visible dots, some flashing, some static. When I open a document, or a page in Safari, it displays more or less normally (I can use Word, for example), by then "smears" if I start to scroll down the page. At other times the graphics break up completely.
I'm guessing this is a display problem, but one other odd symptom is that sometimes if I click on a file in the Finder window, instead of opening the document the window shuts down and re-opens in its starting configuration.
I tried a restart, but it stuck on a black screen, and I had to force it to stop via holding the start button, and start again from there. I tried accessing system profiler, and it all froze up, requiring another button stop / start.
It looks like a hardware issue, but I've no idea what kind. Anybody recognise what is happening? (I'm posting this from my iBook).
Kenny

Since the update 10.9.4:
My soundcard is missing and on Safari 7.0.5 video artefacts and flickering.
On macbook Pro 13 Early 2011

MacBook Pro and Cintiq 12UX display problems?

Hi,  
I'm not sure if this is the right place to post this so I'm sorry if it isn't - this is just the only place I could think of to ask about a display problem?
I’ve just got the new model Cintiq 21UX, and I’m running it off one of the newer model MacBook Pro’s (using Apples adapter to connect the two).
Everything seems to be working fine, although on the Cintiq’s screen I get flickering green pixels in darker areas of the screen? The confusing thing is it doesn’t happen all the time, it just seems to be the one particular ‘shade’ of dark grey/dark tones it happens on - an example is if I move an image around then its the same area of colour it has problems with across the screen, or if I zoom in the effected area gets bigger etc. I can also edit the colour to a slightly different shade and the problem stops so it can’t be a dead/frozen pixel. If I turn on the mirror display option it is still only the Cintiq display that is effected.
I currently run the MacBook using the Nvidia 9600M GT, I did try switching to the 9400M but it made the situation a lot worse and caused green pixels lines to flash horizontally across the screen.
I can save the image or drag the window that the problems happening on and drag it back to the MacBooks’ screen and there is no problem with the pixels there - it’s only on the Cintiq display.
I was just wondering if this is either a fault with the Cintiq tablet itself, or possibly a problem with the MacBook?
If it’s useful the spec of the MacBook is: 
Late 2008 unibody 15.4”
Mac OS X v10.6.3 Snow Leopard
2.8 GHz Intel Core 2 Duo
4 GB 1067 MHz DDR3
Nvidia GeForce 9600M GT & 9400M
I’m not sure what other spec would be of use but if theres more I can let you know.
Any help would be appreciated, as it works fine other than this occational green flicker, and it’ll cost me a lot to send of either the Cintiq or the MacBook off for a service or replacement in the UK?
Cheers!

It could just be bad. Do you have another computer to try it with?

Icon and menu "Ghosting" & intermittent startup display problems

Hi all
My Ti is almost 7 years old. 90% of the time it sits on my desk - very rarely moved. Plenty of ventilation and in an air conditioned room.
I have a LG L1780Q digital 17 inch monitor which has been attached for the last two years. My desktop is spread across both screens.
Within the last three months a problem with the display began to present itself - initially it was very intermittent but now the problem is appearing daily.
everything on the desktop like icons and menu bars and dock icons become pasted with a Ghosting approximately twice the width of the icon. The mouse cursor also has a vertical pair of horizontal bars which move around with the cursor.
This problem never effects application windows at all. The bars attached to the cursor remain when hovered over the app - However the application content is not affected at all. So the problem exists only with "desktop" items.
The problem also manifests on both screens. About 50% of the time I can grab an application window with the mouse and drag it all over the desktops and this "wipes clean" the problem - a bit like an eraser. However, in the last couple of days even this doesn't help. 50% of the time a reboot may solve the problem but that too now is getting worse and worse. Also, occasionally on a reboot, instead of the user login window all i get is a series of broken whitish lines against the standard blue background - this is again across both screens. This is obviously the login screen but all scrambled.
Reading the posts here I'm beginning to fear that the dreaded "replace the logic board" phrase may come up
Any suggestions would be gratefully received. Thanks.
I love my TiBook - please don't tell me it's dying

Hi
Many thanks for your advice.
First, of course you are correct - I bought the Ti in Jan 2003. It just seems like it's been with me forever!
In response to your suggestions this is what happened:-
Disconnected external monitor - problem still there.
Booted from original install DVD - problem still there.
I ran disk repair anyway - it found some errors with the catalog file entries, said it fixed them - problem still there as suspected.
Now the wierd thing - after Disk repair i rebooted from HD without the external monitor connected. After sitting watching the spinning grey wheelie thing on the grey start screen for an hour I decided to leave it and go to bed. I don't know what time it actually booted but an hour seems an inordinately long time?
After reboot - problem still there (pretty bad now).
When i reconnected my external monitor, it auto detected the digital feed, screen came on for a second and then went black. Powering the monitor off and on again produced exactly the same result. If I look closely i can just make out very faintly the desktop content on the blacked out external monitor - as though the backlight has failed! Powering off and on does the same thing every time - 1 second of full brightness and content then black!
BOOHOO!!! is my Ti dying?
Unfortunately I don't have the Apple Hardware Test CD.
Should I sit down in anticipation of the verdict?
many thanks

Unibody Macbook Pro 17inch Display problems, vertical lines and artifacting

Hey everybody
I bought my 17inch MBP at B&H in June (week before WWDC, D'oh) and it was working fine until I came over to Ireland to work on a editing job for the summer, as soon as I attached it via mini display to a second monitor I started getting artifacts and vertical lines in certain shades and colours on the macbooks display, its gradually gotten worse so much so in fact that it is nearly unusable.
I have seen the thread about the firmware update, but my computer is already up to date with that but it still has this problem, I contacted apple and was told to take it to the apple store and the genius bar in Belfast, as helpful as the rep was he told me it would be two weeks for a repair, by replacing the logic board. Which I just can't do as I've only got three weeks left on the job and need my mac every day. I've searched and it seems no-one is having this problem except me since the firmware update, but clearly my machine still has problems.
Never had a problem with all my previous Mac's but I'm close to tossing this in the bin please help because if I can't get this solved I will have to move to PC and install my copy of AVID on it as this is the only other available computers at this production company.
What to do? Has anyone else had this problem recently? Or know of a fix for it? I've tried everything downloaded the firmware told me its already installed, switched the graphics displays etc etc
Please help
Thanks
Tom Lindsay
Message was edited by: tomlindsay101

Welcome to Apple Discussions!
It sounds like there is a hardware problem of some sort with the graphics chips, and the only real fix is going to be to replace the logic board. So at some point, you will have to send your Mac off for repair.
In the US, you can sometimes arrange to get a loaner. You might ask if this would be possible where you are, since the repair is going to take so long.
Unfortunately, I don't know of anything that would fix your problem other than a repair.
Good luck!

Wierd lines on my display and frequent lock-ups w/ and w/o display problems

When booting I sometimes get weird lines and blocks on my display (the GRAY Apple screen) and then it hangs, other times the computer will boot and run fine for 20-30 minutes and then the display goes wonkers with blocks and lines and the computer does not respond. The only way I can get it to boot is to reset the PRAM by letting it CHIME 3x and then occasionally it will boot without issue and run, while other times I still get the blocks and lines on the display.
When I am able to get it to recover and re-boot after the lock-up and display problems and occasionally the box in the middle asking me to re-boot similar to a kernel panic the OPS gives me the option to REPORT the error and here is the error for others who would know more...
Thank you in advance,
Darren
Interval Since Last Panic Report: 104960 sec
Panics Since Last Report: 5
Anonymous UUID: 7D1AEF43-7E19-4F58-A1E0-48FA992A2814
Wed Nov 18 15:49:50 2009
panic(cpu 0 caller 0x9cdb10): NVRM[0/1:0:0]: Read Error 0x00009410: CFG 0xffffffff 0xffffffff 0xd2000000, BAR0 0xd2000000 0x5d3e2000 0x084700a2, D0, P1/4
Backtrace (CPU 0), Frame : Return Address (4 potential args on stack)
0x5c99b7d8 : 0x21b2bd (0x5cf868 0x5c99b80c 0x223719 0x0)
0x5c99b828 : 0x9cdb10 (0xbb7fec 0xc209c0 0xbc3660 0x0)
0x5c99b8c8 : 0x147690d (0x8b5ac04 0x7edf004 0x9410 0xabd962)
0x5c99b908 : 0x1534e6a (0x7edf004 0x9410 0x5c99b968 0x9)
0x5c99b948 : 0xb51ca5 (0x7edf004 0x91ed004 0x0 0x0)
0x5c99b968 : 0xac155b (0x91ed004 0x5c99baa4 0x0 0x0)
0x5c99b9b8 : 0x145f290 (0x7edf004 0x3d0900 0x5c99baa4 0x0)
0x5c99bad8 : 0xab2821 (0x7edf004 0x91cf004 0x815200c 0x200)
0x5c99bb18 : 0xb1f172 (0x7edf004 0x91cf004 0xeb9bcc0 0xeb9bc04)
0x5c99bbc8 : 0xb202db (0x7edf004 0x91f0404 0x0 0x0)
0x5c99bc58 : 0x14bb7a3 (0x7edf004 0x91f0404 0x9 0x2)
0x5c99bd68 : 0x14ed407 (0x7edf004 0x91cf404 0x0 0x0)
0x5c99be98 : 0xad3934 (0x7edf004 0x91ca404 0x0 0x0)
0x5c99bec8 : 0x9d61fb (0x7edf004 0x91ca404 0x0 0x0)
0x5c99bf08 : 0x5491b5 (0x0 0x9499680 0x1 0x29c50a)
0x5c99bf58 : 0x5481e6 (0x9499680 0x1 0x5c99bf88 0x547d9d)
0x5c99bf88 : 0x548640 (0x8abaf00 0x7e9ecc0 0xe780850c 0x2a6e5f)
0x5c99bfc8 : 0x29d68c (0x8abaf00 0x0 0x10 0x88bbfc4)
Kernel Extensions in backtrace (with dependencies):
com.apple.nvidia.nv50hal(6.0.6)@0x136b000->0x17f1fff
dependency: com.apple.NVDAResman(6.0.6)@0x96f000
com.apple.NVDAResman(6.0.6)@0x96f000->0xc21fff
dependency: com.apple.iokit.IOPCIFamily(2.6)@0x932000
dependency: com.apple.iokit.IONDRVSupport(2.0)@0x961000
dependency: com.apple.iokit.IOGraphicsFamily(2.0)@0x943000
BSD process name corresponding to current thread: kernel_task
Mac OS version:
10C540
Kernel version:
Darwin Kernel Version 10.2.0: Tue Nov 3 10:37:10 PST 2009; root:xnu-1486.2.11~1/RELEASE_I386
System model name: MacBookPro3,1 (Mac-F4238BC8)
System uptime in nanoseconds: 3788331456483
unloaded kexts:
com.apple.driver.AppleFileSystemDriver 2.0 (addr 0xf02000, size 0x12288) - last unloaded 94521475551
loaded kexts:
org.virtualbox.kext.VBoxNetAdp 2.2.2
org.virtualbox.kext.VBoxNetFlt 2.2.2
org.virtualbox.kext.VBoxUSB 2.2.2
org.virtualbox.kext.VBoxDrv 2.2.2
com.bresink.driver.BRESINKx86Monitoring 5.0
com.pctools.iantivirus.kfs 1.0.1
com.apple.driver.AppleHWSensor 1.9.2d0 - last loaded 31800108689
com.apple.filesystems.ntfs 3.1
com.apple.filesystems.autofs 2.1.0
com.apple.driver.AppleHDA 1.7.9a4
com.apple.driver.AirPort.Atheros 412.19.4
com.apple.kext.AppleSMCLMU 1.4.5d1
com.apple.driver.SMCMotionSensor 3.0.0d4
com.apple.DontSteal_Mac_OSX 7.0.0
com.apple.driver.AudioIPCDriver 1.1.2
com.apple.driver.AppleIntelMeromProfile 19
com.apple.driver.ACPISMCPlatformPlugin 4.0.1d0
com.apple.driver.AppleLPC 1.4.9
com.apple.driver.AppleBacklight 170.0.14
com.apple.driver.AppleUpstreamUserClient 3.1.0
com.apple.GeForce 6.0.6
com.apple.driver.AppleUSBTrackpad 1.8.0b4
com.apple.driver.AppleUSBTCKeyEventDriver 1.8.0b4
com.apple.driver.AppleUSBTCKeyboard 1.8.0b4
com.apple.iokit.SCSITaskUserClient 2.6.0
com.apple.BootCache 31
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
com.apple.iokit.IOAHCIBlockStorage 1.6.0
com.apple.iokit.AppleYukon2 3.1.14b1
com.apple.driver.AppleAHCIPort 2.0.1
com.apple.driver.AppleSmartBatteryManager 160.0.0
com.apple.driver.AppleIntelPIIXATA 2.5.0
com.apple.driver.AppleUSBHub 3.8.4
com.apple.driver.AppleFWOHCI 4.4.0
com.apple.driver.AppleUSBEHCI 3.7.5
com.apple.driver.AppleUSBUHCI 3.7.5
com.apple.driver.AppleEFINVRAM 1.3.0
com.apple.driver.AppleRTC 1.3
com.apple.driver.AppleHPET 1.4
com.apple.driver.AppleACPIButtons 1.3
com.apple.driver.AppleSMBIOS 1.4
com.apple.driver.AppleACPIEC 1.3
com.apple.driver.AppleAPIC 1.4
com.apple.security.sandbox 0
com.apple.security.quarantine 0
com.apple.nke.applicationfirewall 2.1.11
com.apple.driver.AppleIntelCPUPowerManagementClient 96.0.0
com.apple.driver.AppleIntelCPUPowerManagement 96.0.0
com.apple.driver.DspFuncLib 1.7.9a4
com.apple.driver.AppleProfileReadCounterAction 17
com.apple.driver.AppleProfileTimestampAction 10
com.apple.driver.AppleProfileThreadInfoAction 14
com.apple.driver.AppleProfileRegisterStateAction 10
com.apple.driver.AppleProfileKEventAction 10
com.apple.driver.AppleProfileCallstackAction 20
com.apple.iokit.IOFireWireIP 2.0.3
com.apple.iokit.IO80211Family 310.6
com.apple.iokit.IOSurface 73.0
com.apple.iokit.IOBluetoothSerialManager 2.2.4f3
com.apple.iokit.IOSerialFamily 10.0.3
com.apple.iokit.IOAudioFamily 1.7.2fc1
com.apple.kext.OSvKernDSPLib 1.3
com.apple.driver.AppleHDAController 1.7.9a4
com.apple.iokit.IOHDAFamily 1.7.9a4
com.apple.iokit.AppleProfileFamily 41
com.apple.driver.AppleSMC 3.0.1d2
com.apple.driver.IOPlatformPluginFamily 4.0.1d0
com.apple.nvidia.nv50hal 6.0.6
com.apple.NVDAResman 6.0.6
com.apple.iokit.IONDRVSupport 2.0
com.apple.iokit.IOGraphicsFamily 2.0
com.apple.driver.CSRUSBBluetoothHCIController 2.2.4f3
com.apple.driver.AppleUSBBluetoothHCIController 2.2.4f3
com.apple.iokit.IOBluetoothFamily 2.2.4f3
com.apple.iokit.IOUSBHIDDriver 3.8.4
com.apple.driver.AppleUSBMergeNub 3.8.5
com.apple.driver.AppleUSBComposite 3.7.5
com.apple.iokit.IOSCSIMultimediaCommandsDevice 2.6.0
com.apple.iokit.IOBDStorageFamily 1.6
com.apple.iokit.IODVDStorageFamily 1.6
com.apple.iokit.IOCDStorageFamily 1.6
com.apple.driver.XsanFilter 402.1
com.apple.iokit.IONetworkingFamily 1.9
com.apple.iokit.IOATAPIProtocolTransport 2.5.0
com.apple.iokit.IOSCSIArchitectureModelFamily 2.6.0
com.apple.iokit.IOAHCIFamily 2.0.2
com.apple.iokit.IOATAFamily 2.5.0
com.apple.iokit.IOUSBUserClient 3.8.5
com.apple.iokit.IOFireWireFamily 4.1.7
com.apple.iokit.IOUSBFamily 3.8.5
com.apple.driver.AppleEFIRuntime 1.3.0
com.apple.iokit.IOHIDFamily 1.6.1
com.apple.iokit.IOSMBusFamily 1.1
com.apple.kext.AppleMatch 1.0.0d1
com.apple.security.TMSafetyNet 6
com.apple.driver.DiskImages 281
com.apple.iokit.IOStorageFamily 1.6
com.apple.driver.AppleACPIPlatform 1.3
com.apple.iokit.IOPCIFamily 2.6
com.apple.iokit.IOACPIFamily 1.3.0
Model: MacBookPro3,1, BootROM MBP31.0070.B07, 2 processors, Intel Core 2 Duo, 2.2 GHz, 4 GB, SMC 1.16f11
Graphics: NVIDIA GeForce 8600M GT, GeForce 8600M GT, PCIe, 128 MB
Memory Module: global_name
AirPort: spairportwireless_card_type_airportextreme (0x168C, 0x87), Atheros 5416: 2.0.19.4
Bluetooth: Version 2.2.4f3, 2 service, 0 devices, 1 incoming serial ports
Network Service: AirPort, AirPort, en1
PCI Card: pci168c,24, sppci_othernetwork, PCI Slot 5
Serial ATA Device: ST9320421ASG, 298.09 GB
Parallel ATA Device: MATSHITADVD-R UJ-857E
USB Device: Built-in iSight, 0x05ac (Apple Inc.), 0x8502, 0xfd400000
USB Device: Apple Internal Keyboard / Trackpad, 0x05ac (Apple Inc.), 0x021a, 0x5d200000
USB Device: Bluetooth USB Host Controller, 0x05ac (Apple Inc.), 0x8205, 0x1a100000
Anyone know what is causing my problems? I thought it was heat so I downloaded a CPU and FAN temperature monitor and the CPU was getting VERY HOT at first so I then ramped-up the CPU FAN SPEED to maximum - it turns out the CPU FAN was not rotating well at low speed - since then I have cleaned and checked the fans and they all work as they should and blow on high(er) when the CPU temperature is above a certain level.

S.U.
Is there a kb article or something that would illuminate what to look for in these logs, or is it a matter of learning by osmosis?
Both. I am not skilled in reading logs. It is a very technical and time consuming task for the uninitiated (me!) In scanning a log I look for the backtrace and loading dependencies. The first item in the backtrace is usually the roadblock.
Beyond that you can look at the Technical Note TN2063: Understanding and Debugging Kernel Panics
Should make for good bedtime reading. Puts you right to sleep.
c

Macbook and HP 2510i monitor display problem - help

Hello,
I am having display problem with my Macbook (Intel) and my 25'' HP 2510i monitor via DVI.. Until last monday I do not have any problems and my monitor was working flawless with my macbook.. Last monday I used the monitor with my HP Notebook to try Windows 8 on large screen. And after that try when I connect the monitor back to Macbook there is no display.. I tried the steps below
- I connected Macbook to my Phillips Plasma TV and it worked (no error with display card of Macbook or the wire or the adaptor)
- I connected the monitor back to HP laptop it worked.. (so no error with the monitor)
- I unplugged monitor to cut electricity and tried.. nope not working
- I did several tricks with macbook no effect
- I reinstalled Mountain Lion .. no effect
- I formatted Macbook, reinstalled Snow Leopard.. Not working.. I installed back Mountain Lion .. not working
Whatever I tried the HP2510i is not displaying, mirroring my Macbook..
Any help will be appreciated
Thanks

My graphic card details;
NVIDIA GeForce 9400M:
Chipset Model:          NVIDIA GeForce 9400M
Type:          GPU
Bus:          PCI
VRAM (Total):          256 MB
Vendor:          NVIDIA (0x10de)
Device ID:          0x0863
Revision ID:          0x00b1
ROM Revision:          3462

Display Problem with my Mac Pro and LG Flatron Wide Monitor in Mountain Lion

After upgrading to Mountain Lion, my Mac Pro has display problems with my LG Flatron display. The image is displayed with a black bar on the right and on the bottom. And the left side of the content is not visible. I tried every resolution available in the Display System Preferences, they are different in terms of how big the black bars are, and what part is not visible, but none of them are correct. I held down the option key to try to detect displays or switch to resolutions that are not normally available. When I restart the image is lined up with the display, but if the display ever goes to sleep or gets turned off, the image reverts to being off center, and the only way I can get it back is to restart... The interesting thing is that this monitor works fine with the same machine if I reboot using BootCamp into Windows 7. The Monitor also works fine, connecting the same connector to a Mac Mini, although that mac mini is running 10.6 and not Mountain Lion. I've reset the SMC and restarted countless times, I don't see any other levers to pull or things to try...

That card is for a PC it may not give you Startup and Option-Boot screens.
The 7950 "Mac Edition" card has a very distinctive look:
http://www.sapphiretech.com/presentation/product/product_index.aspx?cid=1&gid=3& sgid=1157&pid=1777&psn=&leg=0&lid=1

T61 display problems - garbling and worse

Similar Messages

Maybe you are looking for