T61 doesn't turn on after BIOS upgrade! PLEASE HELP!
Hi all,
I just reinstalled XP on my 4 months old T61 and installed Lenovo's System Update thing. There was an BIOS update option there, so I selected it. It downloaded it and then done the upgrade - there were no errors, everything was smooth. All was fine. At least it looked that way. I rebooted it. It hanged on the boot screen (at POST). So I tried to reboot it or turn it off - there was no way to do it - the keyboard was not responding, tried pressing the power button for like a minute, but nothing. It was frozen on the bootscreen logo. So I removed the power plug and then the battery to cut the power and turn it off.
I inserted the battery and the power plug back... and... IT DOESN'T TURN ON ANYMORE. Not only it will not respond to me clicking the power button, but also the light on the backside of the lid doesn't light up when I plug in the power supply. What the hell happened? What should I do?
I tried removing the RAM and replacing it, cause I had a spare stick, but, as I thought it didn't do anything.
Is it possible that the power circuit inside T61 was somehow damaged when I removed the battery when the computer was running?
Some more info:
The battery was fully charged when flashing, I was on the AC and the BIOS version was selected automatically via Lenovo System Update.
I know how to flash BIOSes, I did it like a hundred times in my life already, even hex-hacked one on a very old PC. Never had any problems.
This is the BIOS I upgraded to:
http://www-307.ibm.com/pc/support/site.wss/document.do?sitestyle=lenovo&lndocid=MIGR-67988
My T61's model is: 6465-CTO
OMG I'm so desperate right now.
Please HELP! I don't know what should I do!
And to top it off, I don't know if my warranty is going to be any good in Poland (see thread: http://forum.lenovo.com/lnv/board/message?board.id=Special_Interest_General&thread.id=88 )
Best regards,
NIXin
It is disturbing - Yes.
However, I have lost count of the number of BIOS or ECC updates I have made with System Update and have never ever had something go wrong. Obviously those that experience a problem are going to look for help and post in forums, it would be interesting to know how many have never had a problem?? They have no reason to post.
You wrote; "bricks their Txx about once a week", how many ThinkPads are sold per week? It is guaranteed to be an absolute nightmare for the owner, quite understandably, but if I was paranoid I wouldn't drive my car to work - I might have an accident.
Andy ______________________________________
Please remember to come back and mark the post that you feel solved your question as the solution, it earns the member + points
Did you find a post helpfull? You can thank the member by clicking on the star to the left awarding them Kudos Please add your type, model number and OS to your signature, it helps to help you. Forum Search Option T430 2347-G7U W8 x64, Yoga 10 HD+, Tablet 1838-2BG, T61p 6460-67G W7 x64, T43p 2668-G2G XP, T23 2647-9LG XP, plus a few more. FYI Unsolicited Personal Messages will be ignored.
Deutsche Community Comunidad en Español English Community Русскоязычное Сообщество
PepperonI blog
Similar Messages
-
HT1267 my iphone say imei iccid unknown after i upgraded please help
my iphone says imei iccid unknown after i upgraded please help
That indicates a critical failure. It can not be fixed. The phone will need to be replaced.
Often, this is the result of attempting to update a jailbroken phone. -
K8N Platinum SLI will not do anything after BIOS upgrade! HELP!
Hi guys,
I just upgraded my BIOS version using MSI Live Update. I rebooted the system, checked my BIOS settings and proceeded into Windows. Windows re-detected some hardware and said I needed to reboot. Instead I decided to shutdown completely and then power-on again.
However, the system will no longer display anything! All the fans come on, and I can hear my HDD power-up too, but nothing is displayed on screen and there is no HDD activity. The LEDs on the D-Bracket are showing 1.Red 2.Orange. 3.Red 4.Orange.
I have disconnected all hardware except my main HD and Graphics Card and reset the BIOS. I did the by using the button and by removing the battery for 10/15 minutes or so. Still no change!
I have also tried re-seating my Graphics card and RAM, but since I only rebooted - I don't see how anything could have come loose...
Please help me to diagnose the problem.
Thanks!
P.S. I do not overclock at all.The only guy I know with an AMD x64 PC lives too far away for me to just pop-over and check the components. My local PC store would charge an arm and a leg to check the PC out and I'm not even sure I would trust them to do it right. As for Best Buy, we don't have those over here in the UK.
I have an Antec Neopower 480, which is still powering all my case fans and HDDs.
I am almost certain that the Motherboard or Processor is at fault, so I have ordered a new MOBO. If that doesn't fix it, then I presume it will be the Processor.
I think it must have been something to do with the BIOS upgrade, it can't just be a coincidence. -
Dear all,
I just updated my I phone 4 to IOS5. After upgrade when it was restoring backup it showed me error-50. But now I dont see any apps, photos on my iphone. I tried to sync it again and again several times but its not working. Please help how to get back everything !!!Bump
-
My Mac Mini won't turn on after being stored please help"
I stored my Mac mini for several months as I do every year but this time it won't turn on. Please help! It's an older version probably 2006-2007.
check out this discussion.
you should definitely get a decent UPS to protect your investment.
something like the APC Back-UPS ES 700 should suffice. -
Music heard, video not seen after iTunes upgrade - Please help
I upgrades last Sunday and since then the video can't be seen on my music videos but the music can be heard. Can someone please help? Thanks
Sony Vaio Windows XP Media VersionOn my ipod it's black and on my pc it's bright flashes of color.
Hmmm. I think you might have two different things going on there.
For iTunes (the PC), try starting with the "Disable Direct3D acceleration" section from the following document:
Troubleshooting iTunes for Windows XP and 2000 video playback performance issues
For the iPod, try the following document:
iPod plays audio but not video of movies -
Help Please - X200 will not boot after Bios Upgrade - keeps asking for power on password
Hi there,
I am new to this forum and please let me say a big Thank You for your help in advance.
I am using a lenovo thinkpad x200 running windows vista with service pack 1.
The laptop has always been running fine and has never given me any issues. Unfortunately, all this came to an end yesterday when I ran the system assistant which did a round of updates and it prompted me to reflash my bios.
I did what was instructed and closed all open applications and after the laptop restarted, there was a noise from the harddisk (the sound was basically like what happens if the harddisk suddenly loses power). Then, all i got was a black screen, no harddisk acitvity with only the power cable LED and another LED (with the shape of a N tiled at 20 degrees) on.
I searched the forum and did what was suggested in this entry: http://forum.lenovo.com/t5/X-Series-ThinkPad-Laptops/Blank-screen-after-Bios-Upgrade-on-X200/ta-p/29...
This is what I did so far"
I turned off the power, took out the backup battery and waited for about 30 minutes (repeated this step several times, also removing the harddisk) but to no avail.
I removed the RAM and tried booting and there was that characteristic beeping sound.
I replaced the RAM, redid the CMOS clearing, and now there is the Lenovo startup screen. However, there would be an error code 0271 (no date time) and 0251 (something about default configuration). Then, these disappear and all I am left with is the Bios Power On password prompt. Somehow no matter what I type nothing can be input into the field (and I did not create any password as far as I can remember).
I redid the clearing for the power on password by removing the backup battery as suggested at the bottom of this page http://support.lenovo.com/en_US/detail.page?LegacyDocID=migr-59377 but it is no use. Each time I restart, even if I press the blue Think Vantage button or F1 or F11, I still get the same 0271 and 0251 error messages and am left with the power on password prompt.
I am really desperate as I really like my lenovo x200 and there is important data on the laptop. I would appreciate any suggestions on how I can solve this. Its amazing how a simple update can turn into such a disaster. Now i know i should never upgrade or update my Bios (or at least proceed with extreme caution).
Anyone can provide some help to get my laptop workin again?
Thank you very much,
Marktry reflashing your bios?
http://support.lenovo.com/en_US/downloads/detail.page?&LegacyDocID=MIGR-70348
Regards,
Jin Li
May this year, be the year of 'DO'!
I am a volunteer, and not a paid staff of Lenovo or Microsoft -
Most of my icons have turned white after I upgraded the operating system
All of the links on my ipad have turned white after I upgraded to 8.1.2. Is there a way of fixing this?
Try restore from iTunes or iCloud backup.
-
Why My iPhone 4 doesn't have sound after I upgrade it to IOS 7.0.2
Why My iPhone 4 doesn't have sound after I upgrade it to IOS 7.0.2?
Try this - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.) No data/files will be erased.
Cheers, Tom -
Xperia doesn't turn on after falling out of my pocket
My Xperia doesn't turn on after falling out of my pocket (2' off the floor), the only thing that's on is the flash led. Is there a solution or should I just replace the phone?
I tried to use PC Companion after charging the phone over night and still the same problem; the flash led is the only thing that's on and PC Companion doesn't detect the phone at all, so I guess I have to replace my phone.You have to perform a software repair using PC companion.You might need to charge your device for about 1-2 hours before so the device has at least 60% battery.
Make sure the device is not connected to computer or laptop and turned off (sometimes you have to press power button and volume up until the device vibrates 3 times or on some devices you have to press the small button near the SIM tray or on the back of the device).
Open PC companion->support zone->phone/tablet software update->repair my phone/tablet blue highlighted.Follow the steps given,do not connect your phone until prompted to press volume down while plugging USB cable.
All we have to decide is what to do with the time that is given to us - J.R.R. Tolkien -
Bluetooth Driver In Windows 8.1 is Not Working after upgrading please help (pavilion g6 2008Tx)
what cAN i do to make it work?please helpHi:
If your model uses a Ralink wireless card, see if installing this bluetooth driver works.
http://h20565.www2.hp.com/hpsc/swd/public/detail?swItemId=ob_135494_1 -
After installing ios7, my ipad buttons stopped working, I can't even turn off the ipad. Please help me. I don't know what to do.
Try to reset the device:
Device Reset (won't affect settings/data/music/apps/etc)
1. Press and hold (& continue to hold) BOTH the Sleep/Wake button & the Home button.
2. Continue to hold BOTH (ignoring any other messages that may show) until you see the
Apple logo on the screen.
3. Release BOTH buttons when you see the Apple logo and allow the device to boot
normally. -
My BBZ10 won't turn on after battery died? Help?
My BBZ10 won't turn on after battery died? Help?
reebok6453, let's bring life back to that device! Connect that device to your charger for at least 30 minutes and then press/hold the power button down. Keep us posted.
LasinaH_VZW
Follow us on Twitter @VZWSupport -
MOVED: BIOS PANIC---Please Help!!! (Amd athlon Xp2100+)
This topic has been moved to AMD Socket A Forum
BIOS PANIC---Please Help!!! (Amd athlon Xp2100+)...OK...you're in the wrong forum but here's what happened...your FSB was set to 100 after you flashed...correct setting for 2100+ XP is 133 (2 X 133 = 266MHz)...
-
In my ipad mini sound is there but somehow display turned off....please help...how to turn on the display
Frozen or unresponsive iPad
Resolve these most common issues:
• Display remains black or blank
• Touch screen not responding
• Application unexpectedly closes or freezes
http://www.apple.com/support/ipad/assistant/ipad/
iPad Frozen, not responding, how to fix
http://appletoolbox.com/2012/07/ipad-frozen-not-responding-how-to-fix/
iPad Frozen? How to Force Quit an App, Reset or Restart Your iPad
http://ipadacademy.com/2010/11/ipad-frozen-how-to-force-quit-an-app-reset-or-res tart-your-ipad
Black or Blank Screen on iPad or iPhone
http://appletoolbox.com/2012/10/black-or-blank-screen-on-ipad-or-iphone/
What to Do When Your iPad Won't Turn On
http://ipad.about.com/od/iPad_Troubleshooting/ss/What-To-Do-When-Your-Ipad-Wo-No t-Turn-On.htm
iOS: Not responding or does not turn on
http://support.apple.com/kb/TS3281
Home button not working or unresponsive, fix
http://appletoolbox.com/2013/04/home-button-not-working-or-unresponsive-fix/
Fixing an iPad Home Button
http://tinyurl.com/om6rd6u
iPad: Basic troubleshooting
http://support.apple.com/kb/TS3274
Cheers, Tom
Maybe you are looking for
-
LR 2.6or7 and LR3 on same machine? Want to test...
I'd like to see if my setup will have problems reported here. Can I install BOTH programs? (That would add LR3 to existing 2.6 install.) I really just started using LR2.x a little while ago but I want to try LR3 with non-production images. I don't ha
-
How to upgrade from weblogic 10.3.5 to 10.3.6
Hello I have been deployed three Weblogic domains across two Windows servers 2008 R2, one domain host oracle business intelligence publisher, one domain host JEE enterprise applications and one domain will host Oracle form and Oracl
-
Hello! I need to delete data of a particular InfoCube. I was wondering if there is a standard function module in SAP which I can modify? Kind regards
-
Sap Records Management: how to get attributes of record?
Hi everybody who has had an experience in SAP Records Management programming. Tell me please how can i get a list of attributes of certain record or document? I have an instance of CL_SRM_POID class and I also can get an instance of CL_SRM_SP_RECORD
-
Hi, I installed Flash Player 11.6.602.180 installed on Win 7 with IE and can never play videos from this site http://w3.newsmax.com/newsletters/uwr/video_hyman.cfm?s=al&promo_code=12CF6-1 any idea what this site is looking for ? thanks bill m