T61 hard drive crashed due to Windows Updates

I posted in this forum a few months back about my hard drive crashing as a result of a windows update.  I can't find the the thread and it really contained some useful advice/instructions on steps I could take to troubleshoot and fix my problem.  If there is no way to restore the drive, I basically want to get the data off of that hard drive.  I don't know if I will be able to recover any of the software (which is depressing), but at least the data on the drive.  Is there any way to do this?  If so, could you post the steps?  BTW, I know NOTHING about how to do this, I'm a front-end coder.  Never built or done any serious trouble-shooting of a PC. 
(was) running Windows XP
thanks!
chris

Hello,
I wonder if the file system on the hard disk drive migth have some corruption which is preventing it from booting up as it normally should. 
See if you can boot the computer in Safe Mode with Command Prompt by repeatedly tapping the F8 key as it powers up.  From there, try running CHKDSK C: /F /R command (which may require a reboot and will likely take some time) and see if that fixes the issue.
Regards,
Aryeh Goretsky
I am a volunteer and neither a Lenovo nor a Microsoft employee. • Dexter is a good dog • Dexter je dobrý pes
S230u (3347-4HU) • X220 (4286-CTO) • W510 (4318-CTO) • W530 (2441-4R3) • X100e (3508-CTO) • X120e (0596-CTO) • T61p (6459-CTO) • T43p (2678-H7U) • T42 (2378-R4U) • T23 (2648-LU7)
  Deutsche Community   Comunidad en Español Русскоязычное Сообщество

Similar Messages

  • Macbook hard drive crashed, i lost windows for mac, bought a disc when i got the mac, no longer have the disc, need my apps, don't wanna pay for it again.  know how to get it quick without having to give my mac to the genius bar at apple store overnight

    macbook hard drive crashed, i lost windows for mac, bought a disc when i got the mac, no longer have the disc, need my apps, don't wanna pay for it again.  know how to get it quick without having to give my mac to the genius bar at apple store overnight?

    What is it you need - Windows installer disc or something else?  Your question is unclear.  Could you be more specific?

  • Hard drive crashed after mac security update

    My hard drive crashed right after downloading and installing the mac security and safari updates last night? Other than doing a complete re-install from my installation dvd and back-up, is there another way to fix this problem?

    Nope. You may have to replace the drive that crashed if you cannot reformat it.
    Clean Install of Snow Leopard
         1. Boot the computer using the Snow Leopard Installer Disc.  Insert the disc into the
             optical drive and restart the computer.  After the chime press and hold down the
             "C" key.  Release the key when you see a small spinning gear appear below the
             dark gray Apple logo.
         2. After the installer loads select your language and click on the Continue
             button. When the menu bar appears select Disk Utility from the Utilities menu.
             After DU loads select the hard drive entry from the left side list (mfgr.'s ID and drive
             size.)  Click on the Partition tab in the DU main window.  Set the number of
             partitions to one (1) from the Partitions drop down menu, set the format type to Mac
             OS Extended (Journaled) then click on the Apply button.
         3. When the formatting has completed quit DU and return to the installer.  Proceed
             with the OS X installation and follow the directions included with the installer.
         4. When the installation has completed your computer will Restart into the Setup
             Assistant. When you finish Setup Assistant will complete the installation, after which
             you will be running a fresh install of OS X. Now you can begin the update process
             by opening Software Update and installing all recommended updates to make your
             installation current.

  • Recovering Quicktime Pro from a hard drive crash on a Windows based machine

    How do I contact customer support for QuickTime Pro?
    My registration code was activated. My computer crashed. I replaced the hard drive and upgraded the operating system from Windows Vista to Windows 7.
    I need to have my registration code reset without spending more money!
    Is that possible?
    Thanks

    Log in to the Apple Store using the same ID used in the purchase.
    Click the "Downloadable Software" link to retrieve your serial number and name.
    Open the QuickTime Control Panel and use copy/paste to enter that info and your current version of QuickTime will become "Pro".

  • HP Simplesave external hard drive crashes/freezes HP Windows 7 machine

    Okay,
    I have a Simplesave 500GB and an HP Windows 7 64 bit laptop.
    1) On AC.  When the laptop is on AC power, attaching the external hard drive will sometimes freeze the computer, and sometimes not.  Windows must be rebooted.  The mouse can move, but the "busy" icon shows up.  
    2) No AC.  When the laptop is running on battery, attaching the external hard drive will always freeze/crash the computer.  Mouse will move, click is not available, and computer must be rebooted.
    3) Attach external before boot.  When the external hard drive is attahed before booting the laptop, everything is fine.
    Any ideas, anyone?
    --Mark
    {Personal Information Removed}

    Guys I had the same problem on my SimpleSave and traced the issue to swapping it to three computers--a PC Laptop running XP, my laptop running Windows 7 and a Macbook Pro running Snow Leopard OS. The problem is the data is available only on the Mac but not on the Windows--but still it cannot download to the hard drive. I called the Philippine HP guys and they told me to reformat the hard disk. I told them "are you crazy? They have no other solution for me. It seems that the length of time on this thread, even HP has no solution. By the way in the Philippine PC Online Forum a lot of HP SimpleSave users have had the same problem. Could it be a product defect?

  • Hard Drive Crashed While Updating to iTunes 7

    My PowerBook G4's hard drive crashed while I was updating to iTunes 7. Is there anything Apple will do to allow me to transfer my iPod's library to iTunes on my Windows laptop?

    There is not a single thing Apple can do to allow the ipod to do this, it all depends on how you have the ipod formatted.
    If your ipod is formatted for windows, you're in luck! You can install itunes 7 on the windows machine, authorize that computer for your itunes store account, then connect the ipod and put your *itunes purchases* into that itunes.
    If your music was imported from CD's, well you will have to reimport them to the windows computer. If you got songs from other sources you will have to get those from whatever source they came from as Apple does not support any other sources of music other than buying from itunes or importing CD's that you own.
    While on the subject of CD's, if you made a backup of your previous itunes library on CD's you might be able to import it onto the windows computer, not sure though.
    If your ipod is formatted for Mac you are out of luck. No amount of begging and pleading will make a windows computer read mac formatting.

  • Lost Disc recovery after hard drive crashed installed windows 8.1 no drivers

    Hard drive crashed and replaced hard drive with ssd, lost all recovery discs then updated to windows 8.1 now i dont have any drivers like finger print scanner and cd discs will not load. It is a hp pavilion dv6-3079tx 
    Need Help
    Thanks, 
    Leady05

    Hi @Leady05 ,
    Thank you for visiting the HP Support Forums and Welcome. I have looked into your issue about your HP Pavilion dv6-3079tx Entertainment Notebook PC needing drivers and software.
    Here is a link to the HP Support Assistant. Just download and run the application and it will help with the software and drivers on your system that are needed.
    Hp SimplePass Identity Protection Software here.  If you needed to download.  You can download any of the Multi Media software here. Cyberlink products are all there.
    Hope this helps you.
    Thanks.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

  • Hard drive crash trying to update iTunes with my iPod

    So my hard drive crashed all data on it erased, have most of it backed up except for more recent songs in iTunes, which are on my iPod. How do I transfer my iPod data to my newly installed iTunes?

    There is a manual method of accessing the iPod's hard drive and copying songs back to iTunes on Windows posted in this thread: MacMuse - iPod to iTunes
    If you prefer something more automated then there are a number of third party utilities that you can use to retrieve the files from your iPod, this is just a selection. Have a look at the web pages and documentation for these, they are generally quite straightforward.
    iPod Access Mac and Windows Versions
    YamiPod Mac and Windows Versions
    PodUtil Mac and Windows Versions
    iPodCopy Mac and Windows Versions
    PodPlayer Windows Only
    iGadget Windows Only
    If you haven't already done so, put your iPod into manual update mode. If you are using the iPod in manual update mode, your iPod is safe from being accidentally erased when you connect to an empty iTunes after reinstalling your operating system. However if your iPod is set to automatically update you will get a message that your iPod is linked to a different library and asking if you want to link to this one and replace all your songs etc, press *No*. Pressing "Yes" will irretrievably remove all songs from your iPod. Your iPod should appear in the iTunes source list from where you can change the update setting to manual.
    You can also use a keyboard command to prevent your iPod auto-syncing with iTunes. While connecting the iPod to the computer on Windows hold down the Shift + Ctrl keys (on a Mac hold down the Option and Command (⌥ and ⌘) keys). This will stop the iPod from auto-syncing with iTunes and the iPod will appear in the source list. Wait until you are sure the iPod has mounted, and that it will not auto sync and then you can let the keys go. This may take between 20 to 30 seconds depending on your computer. Then go to Preferences>iPod and check the "Manually manage songs and playlists" box: Managing Your Songs Manually
    Whichever of these retrieval methods you choose, keep your iPod in manual mode until you have reloaded your iTunes and you are happy with your playlists etc then it will be safe to return it auto-sync again.

  • I've been using Adobe Acrobat 7 for many years. I updated my full version of Acrobat 5 to get to 7. My hard drive crashed and I've been trying to reinstall Acrobat and it will not install. Adobe will not help because 7 is no longer supported. Does anyone

    I've been using Adobe Acrobat 7 for many years. I updated my full version of Acrobat 5 to get to 7. My hard drive crashed and I've been trying to reinstall Acrobat and it will not install. Adobe will not help because 7 is no longer supported. Does anyone know where I can go for help?

    You won't be able to install your original Acrobat 7 at all, or use your original serial number. The server which used to allow this was switched off.
    But assuming you have a compatible system, like Mac OS 5 or Windows XP, licensed users of Acrobat 7 can download a replacement and get a replacement serial number.
    Error: Activation Server Unavailable | CS2, Acrobat 7, Audition 3

  • HELP!! Complete hard drive crash on IQ826t. Now running Windows 7/32 bit. Need help to rebuild all.

    Hello,
    Pulling my hair out over a complete hard drive crash. I had a new drive installed and also Windows 7/32bit. I was able to recover most of my things from external back-up, but lost all that it takes to run the Touchsmart portion. I'm not a computer Geek but would sincerely appreciate any info to bring back my Touchsmart. I've contacted customer support and little can be done ( or so they say ) now that the warranty has expired.  Has anyone had the same problem?
    Many thanks.

    Has no one actually suggested going to hp.com and downloading the updated files for your model? The Touchsmart apps for Win7 are all listed there for download.

  • Had a hard drive crash - iTunes folder is compromised.  I cannot uninstall what's left or update from 11.0.1.12 - message is it can't locate iTunes64.msi   HELP!!!

    Problem locating iTunes64.msi on Windows 7 64-bit machine.  Can anyone help me?????
    Last version worked fine until hard drive crashed.  Have tried a clean boot - nothing, same problem.  I've deleted temp files, nothing.  Saw another comment that Apple Support genius provided files needed for version they had problem with - once received, they coulld remove (uninstall) old version and update to current version.  I only wish it will be that easy. 

    There is no numerical error number, only a message which I'm including below.  The file iTunes64.msi is not on my computer - so I cannot uninstall the old version noted above - or update it.  There are 189 files left in the folder that appears in the Control Panel.  I cannot uninstall, change or repair it - nor can I remove the folder from the Control Panel.  I believe I've already deleted the folders shown in my program listing - which probably eliminated all my music.
    The hard drive crash has caused several programs to fail such as this, I'm just trying to get my laptop operational with the software or apps I had used previously.
    "The feature you are trying to use is on a network resource that is unavailable
    Click ok to try again, or enter an alternate path to a folder containing the installation package.
    c:\Users\PHayes10\AppData\Local\Apple\Apple Software Update\"
    Looks like I'm not the only one with the same problem.  One person indicated you folks helped him solve the same issue - I'm hoping you can assist me as well.

  • My hard-drive crashed, I own lightroom 5, where can I download it again t re install it. The ADOBE email I had has links that no longer work (thanks for that). Running Windows 7 Home Premium

    My hard-drive crashed, I own Lightroom 5, where can I download it again t re install it. The ADOBE email I had has links that no longer work (thanks for that). Running Windows 7 Home Premium

    Hello Andrea,
    did you try this: http://www.adobe.com/cfusion/tdrc/index.cfm?product=photoshop_lightroom&promoid&promoid=DT EML
    What concerns your eMail you should talk to Adobe, please have a look there: http://helpx.adobe.com/de/contact.html  by clicking throug their questions and if "open" please use chat, I had the best experiences.
    Hans-Günter

  • After hard drive crash, Pages app brought over, and upgrade to snow leopard installed, Pages would not launch.  Re-downloaded the 3.0.3 update and Pages launched, but will not open any documents or start new document.

    After a hard-drive crash, Pages application was brought over from the old hard drive, and upgraded to snow leopard.  However, Pages would not launch.  I do not have the disks and the computer was given to me by my son with iWork 08 installed, so I do not have the ability to re-install using Purchases.  I re-installed the update 3.0.3, which I already had, but thought it worth a try.  That enabled Pages to launch, but it will not open a new or old document.  I can see in preview the document, but it will not open.  Any suggestions besides repurchasing Pages.  I've just put out a lot of money for a new hard drive and retrieval of apps and docs from the old hard drive and would like not to have to put more money in it. 
    Thanks for any suggestions.

    You can not simply drag over Pages, particularly if it was perhaps damaged in a crash.
    As it was only Pages '08 it may be time to upgrade to Pages '09 from the App Store. It is not that expensive and will allow you to install it on any Mac sharing the same Apple I.D. and protect you from a repeat of this problem.
    There are free alternatives to Pages if you are hard strapped, it depends on what you are using Pages for, it is not the only option by far.
    Peter

  • How do I get songs on my ipods back into my itunes library, which was lost due to hard drive crash, How do I get songs on my ipods back into my itunes library, which was lost due to hard drive crash

    Due to a hard drive crash I lost my entire Itunes library.  Majority of this was from an extensive CD library that I imported into itunes.  When I reloaded itunes and viewed my library I only found the titles purchased from itunes.  How do I get music off of an itune classic & itune nano ipods and put back into the library so I don't have to re import my extensive cd collection

    If you purchased all of the songs through itunes store, please follow these steps:
    1. Open up Itunes and Click on Itunes Store
    2. Once you're in the Itunes Store look to right side of the screen and you should see the word "purchased". Click purchased and you'll be sent to a purchase screen.
    3. Click on "All Songs" and then it will show all the songs you've downloaded. From there you just hit the button that looks like a cloud with an arrow on it, and it will download all the songs all over again.
    If you didn't purchase them through Itunes, then you'll have to download software that will strip the songs from your iPod. And here is a guide about how to transfer ipod songs back to computer. Feel free to email me if you need further help.

  • I have Adobe Acrobat 8 Standard and I had to reload it on my computer due to my hard drive crashing. Now I can only open and view PDF's  and I cannot edit them as I could before such as using Tools Comment

    I have Adobe Acrobat 8 Standard and I had to reload it on my computer due to my hard drive crashing. Now I can only open and view PDF’s  and I cannot edit them as I could before such as using Tools>Comment&Markup or Tools>Advanced Editing>TouchUp Text Tool. All the functions are greyed out. Please advise.

    What's your OS? Acrobat 8 is not compatible with any modern OS.
    On Thu, Jan 15, 2015 at 4:16 PM, thomasc1234 <[email protected]>

Maybe you are looking for

  • WebDynpro, Table, selected rows, multiselect

    Hi together, I've got a problem with my "table-control" in WebDynpro. I just want to read the selected rows in the tablecontrol. To read one row is no problem: wdContext.currentnode..... But if there are more selected rows I don't know how to handle.

  • ALV filter problem

    Hi, I am facing a problem with the ALV grid. Recently our system got upgraded to ECC 5.0 There is a column in the grid for displaying message texts.If i try to set a filter for the message text column,a popup comes as usual to select the values in th

  • Get a table from XML with unknown number of columns

    Guys, I'm looking if it is possible to get the following result: imagine I have an XML like one of the following (it doesn't matter which one, I just give a few examples for you to have a choice). The main idea, that there are described several colum

  • DP macros and percentage calculation

    Hi Experts, I need some help to resolve an issue I'm having with macro execution at the aggregated level (product / location) and disaggregated level (product / location / sales group). We have fixed aggregation for POS at product / location / sales

  • Problem when trying to run in "Debug Mode" in JDeveloper9i

    Hello All , i have a problem to debug my application using JDeveloper9i . i get an error: "fdebug.exe could not be read " and Application error box appears . i did the following steps in the instalation: 1) i installed the JDK 1.3 2) installed the Jd