T61 key not working after win7 upgrade

Hi I upgraded my thinkpad T61´s windows from XP to 7(64bits) but one of my key from keyboard stopped to work.
I installed all the drivers and ThinkVantage System Update, but it didn´t work.
My keyboard layout is Portuguese-BR(ABNT) and the problem is with "/" key.
Are there any software to test the key board? Maybe any mapping problem?
Thanks in advance!
Solved!
Go to Solution.

Hi, edbrmm
I would recommend navigating to Control Panel ► Device Manager and opening the tree for Keyboards. Right-click on the keyboard and select Scan for hardware changes. This should scan the keyboard and let you know if anything is wrong with the device, as far as the computer is aware. Try this scan and see if any results are found.
Best,
Adam
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution!" This will help the rest of the community with similar issues identify the verified solution and benefit from it.

Similar Messages

  • Validity sensor/digital persona not working after win7 upgrade on dv3 2050ea

    Hi,
    I have recently clean installed windows 7 after Vista onto a dv3 2050ea laptop. I used the HP downloads page to get all the new drivers for win7 including the validity sensor and digital persona package. Win 7 does not find a biometric sensor and I can't see where to launch digital persona from . What can I do ?
    thanks
    Alan

    I just fixed this problem with my HDX 18,,,,,,I will walk you through the process that fixed my FP reader.
    I upgraded from VISTA to WIN7, that was where the problem occured.
    My PC DL'd the the updated Digital Persona Identity Protection Suite (DPIPS) program for WIN7 from the HP site.
    There is a known incompatibility with this update from HP and WIN7.
    The Validity Sensor Driver that detects the FP reader is the same for VISTA and WIN7 in my PC (check this first / update IF necessary).
    NEXT
    I went through the: START>Control Panel>Programs and Features>Digital Persona>Uninstall.
    Shut down and restart 2X.
    I went back to the HP site and DL'd the DPIPS program for VISTA.
    RUN > DPIPS program.
    UPDATE from the DPIPS Program (Version 4.11.3826) bypassing the the update from HP.
    Hope this works for you.
    > Was your question answered? Mark it as an Accepted Solution!
    > See a great post? Click on the white star and give it a Kudos!

  • Touchpad enable/disable key and Airplane mode key not working after Win10 upgrade

    My fat thumbs roll across the touchpad and take me to some strange places while typing . Since I upgraded to Win10, my disable button (F5) is not functional. Also my Airplane mode button (F12) is not functional. Anyone know a fix?  E45T-A4100 p/n PSK82U-00X00L

    Your welcome, KCSkyhawk.  

  • 7 u j m keys not working after 10.8.1 upgrade, late 2008 aluminum Macbook

    That's all, these keys do not work after update/upgrade today. They were working fine right before i did the update and are not working now. If I hit the M ket a few times i do get some garbage. Help?

    Thanks, but still the same. It boot normally only if there isn't any usb device attach to the computer. I'm using usb mouse instead of bluetooth mouse and it happens not to boot normally like usual.
    The technician said it would be okay if any usb devices attach to the computer during the boot apparently it won't boot normally.
    Any alternative sir?

  • Some keybaord keys not working after suspect virus on Tecra A

    Apostrophe, delete, semicolon and end keys not working after a suspected virus attack. I found record of the same problem on the net but apparently this guy fixed his problem after he found scroll lock or num lock on.
    This is not the case here but there is something going on with numlock - register shows 2 and not 0. change to 0 but when reboot back to 2 again.
    Suspect changed back by bios. I thought i couldnt get to bios because DEL key not working but found ESC works.
    Tried to reset default values for bios but then cannot save and exit as this required the END key to work.
    I was running XP at the time of the (suspected) attack and could not rectify the problem so put the computer back to the OEM status which i hoped would help - it did not, same problem so rather than install all the software on the computer again with XP i upgraded to Windows7 - fresh install.
    Still keys do not work - it was a real pain to start with as my computer was set up to ctl+alt+del to log in and i had to do this with on screen keyboard - XP - this also showed that numlock was on before and after windows boot.
    The reason i suspect a virus - my wife was watching one of her tv shows on line from home country (another toshiba laptop) and i needed to use that laptop for something else so i asked her to use mine - later on we turned the laptops off and in the morning turned tham back on again, the other laptop with AVG virus protection flagged several hits and this one with (FAMOUS and completely up to date) Norton flagged nothing - once i got into it using on screen keyboard.
    Problems with this computer was found after scanning with a different antivirus.
    Anyway - i am left with 4 keys that do not work on my keyboard (actually they did work after i logged into the computer for the first time but i had to hold them in for a long time - and then next time i rebooted, not work at all and havent ever since)
    Any assistance here would be greatly appreciated, i have been working on this all weekend with no joy at all.
    Thanks in advance.

    Thanks Xardas,
    I have essentially done both - tried Toshiba OEM status found on a small partition of the toshi hard drive - no good - then did a fresh install of Windows 7 - still no good
    You know - as cunning as it sounds - i cannot reload the default settings in BIOS as it requires the END key to work so i can Save & Exit - all i can do is Exit Without Save - i sort of feel snookered at the moment.
    Toshiba got back to me today and said that i have tried everything they would have (yeah for sure) and to take my machine into a service centre for a hardware check - yeah right on boys!
    Check out this guys post below found on Kioskea.net - getting close to a year ago...
    ms ml - Nov 10, 2009 12:52am GMT
    Hi there, I was hoping that you might be able to help me with the problem that I seem to be having with my Toshiba Satellite Laptop Keyboard too. For a few days now I havent been able to use a few of the keys on my keyboard, including (1) delete (the backspace key is still working though), (2) colon/semicolon, (3) apostrophe/quotation marks and (4) end (the home and PgUp and PgDn keys are still working though). Any suggestions?
    Identical to my problem....obviously this guy had the same problem as well...see below - same thread.
    yab - Feb 9, 2010 4:47am GMT
    hi did you ever figure this out? i have the same exact problem...
    However, i was not able to solve my problem the way this guy did - my scroll lock is not activated - it seems to work ok (on and off) i tested it using Excel to move around the cells.
    yab ms ml - Feb 9, 2010 7:57am GMT
    Nevermind. For me it was scroll lock. My apostrophe, semicolon, and delete keys are alive and working again. I hope you have the same easy fix.
    Incidently - never hear from the first guy again - probably ended up being his scroll lock.
    all sugestions welcome - sorry my smily face has no eyes -) guess why!

  • My outgoing mail is not working after the upgrade OS to mavericks. my mail client version is 7.1 . please help me resolve this issue

    My outgoing mail is not working after the upgrade OS to the mavericks. my mail client version is 7.1 . please help me out resolve this issue

    Please let me know , How we can reinstall apple mail ? .
    1 . We updated OS to mavericks few machine in last december and still does't works SMTP (Out going mail) on those MAC.
    2.  After that most recently we updated OS to mavericks few machine those are working will with SMTP server .
             a)Not showing any SMTP connection in TCP trace ,
             b) Connection docter every time Says "Connecting to the server "
    3, Then we have installed thunderberd (another mail) client on maverick os, which OS related to apple mail client not woking . It seems other mail client is working well with SMTP server .
    Please help me .
    Thanks,
    Ranesh..

  • Upgrade of our 10.4.11 laptop to 10.5 is accomplished and we now need to upgrade Quicktime and iTunes; however, the user name and password is now not working after the upgrade to 10.5.

    Object is to sync address and calendar between laptop with Max OS 10.4.11 and iPhone. Upgrade of our 10.4.11 laptop to 10.5 is accomplished and we now need to upgrade Quicktime and iTunes; however, the user name and password for the laptop is now not working after the upgrade to 10.5., though it was working prior to the upgrade, for file sharing.

    @ BDAqua > I tried your suggestion but no luck. holding opt+command just gave me a blue screen and it rebotted, pushing the disk out of the drive. Yes, the macbook has 1 gb of ram. I realize that the min req. call for 2 gb of ram so i've got an order in for another dimm to put into the machine. Thanks for your suggestions.
    @ a_brody > Yes. The machine was plugged into a power source. The disk promts you to do that and i recall aspect this form other installs. Thanks for the reminder tho! ( btw your second post is like greek to me man!) 
    @ Kuncklesmac > You're right about Snow Leopard being an upgrade from Leopard. I'm aware of this. And yes previously i've been told by Apple that I needed the Box Set (not the family pack.  i am using the family pack for OS Snow Leopard) to upgrade my 10.4.11 mac - they never mentioned adding ram but i figured that out on my own and an apple specialist recommended it when i purchased Snow Leopard and confirmed that I coul duse the Snow Leopard to upgarde from Tiger (10.4.11). I've also read extensively (as i said above) that it isn't necessary (always) to buy the box set. Several 10.4.11 users report having upgraded using the Snow Leopard upgrade disk only (not the Box Set) without trouble on intel macs (also see the apple link i posted). So i'm just ondering how they did it and i cannot. 
    Thanks fo rall yor help!

  • The MSS ECM FPM Steps are not working after the upgrade

    Hi all,
    The MSS ECM FPM Steps are not working after the upgrade. We use Java Webdynpro and MSS ECM (SP17), version 603.
    On cliking the FPM steps, nothing is happening, however we can navigate using the buttons.
    But this functionality was working before the upgrade.
    Please let me know what should I do.
    Thanks,
    Sarayoodharan.K

    clinet provided in the backend system was not correct during SSO certificate using tx-code strustsso2 -  Cleint should be 000

  • When apple will fix the problem of the Bluetooth. It is not working after the upgrade to7.03

    when apple will fix the problem of the Bluetooth. It is not working after the upgrade to7.03

    there is no problem with B/T and iOS7.0.3 in my case used on iPhone 5 and 4 in several environments including in car
    Do a reset
    restore with back up and if required as new

  • TX2500Z touchscreen does not work after Windows7 upgrade from HP specific to S/N, etc on laptop.

    My TX2500Z touchscreen does not work after I upgraded to Windows 7. I cannot find any support or drivers, etc. to fix.  I bought Windows 7 directly from HP specific to my P/N and S/N on my TX2500Z.  Any help? Thanks.

    after 2,5 days (spending half a day within the apple shop as well with this problem) i have it all back on track.
    i did a lot of different things: trying to remove and reinstall iPhoto; did a SL installation over the old SL I had on my HD; backing up all the data of course before and reformatting my HD and installing a new clean SL version on it + a new clean version of iLife9 with all the updates and than I migrate with migrate assistant all the data and setting with time machine back onto it, but all this didn't work, because it also migrated the error/bug through time machine with it.
    so at the end i just installed a brand new, clean SL version on my hard drive, than I did the updates and put all my data, photos, docs, movies, mail, bookmarks, music, etc manual back into the system (drag and drop from my external HD, where i had an exact copy of my internal HD) and did all the settings again in all the different programs.
    the only thing i used migrant assistant with time machine for was for the programs. it seems to work now all fine and i even got more free space on my HD, because some of the old stuff i always carried with me but i never used, i didn't take over.
    basically everything is clean now. At least i hope and works fine. touch wood!

  • Why is Time machine backup not working after Mavericks upgrade?

    Why is Time machine backup not working after Mavericks upgrade?

    I had the same problem due to the Fire Wire port.  Apple tested it told me it is OK!, I tried a new cable, and have tested both ports on my back up device.  I find it strange that as soon as I installed Mavericks.  The drive does work using USB.  It could be a coincidence, I don't absolutely know at this point, my back up drive ports could stop working, but I doubt it!

  • Re: Safari 7.0 zoom not working after Mavericks upgrade.

    Re: Safari 7.0 zoom not working after Mavericks upgrade.

    Hey there sarunelis,
    It sounds like after updating to 10.9 the zoom function is not functioning at all. It sounds like you may need to check for 3rd party plugins. This article will help you check for that.
    Safari: Unsupported third-party add-ons may cause Safari to unexpectedly quit or have performance issues
    http://support.apple.com/kb/ts3230
    Thank you for using Apple Support Communities.
    Regards,
    Sterling

  • Re: NB200-134 - FN key not working after upgrade to Windows 7 Ultimate

    My FN keys of NB200-134 is not working after upgrading from Windows 7 starter to Windows 7 ultimate. I tried installing every drivers found on Toshiba website for my lappy but still it does not work.
    Help please

    Hi asalamk,
    The FN keys are controlled by Value Added Package and Flash Cards Support Utility. I think you have forgotten to install these tools
    You should check the Toshiba page again and download both tools. Start with installation of Value Added Package then restart your notebook. After this install Flash Cards Support Utility. Once again restart and all FN keys should work properly now.

  • Brightness key not working after upgrading to win 10

    MY laptop has been upgraded to win 10, but after the update brightness key is not working. 

    Hello I managed to solve my problem of brightness key not working by Installing the Intel HD Graphic 3000 Driver from Intel official site. So if your Graphic card is Intel HD 3000 Graphic and your system is 64 Bit OS then you can follow the below link to download it and install.....https://downloadcenter.intel.com/download/24971/Intel-HD-Graphics-Driver-for-Windows-7-8-64-bit Note :- This Graphic driver only support the following intel Processor And If Your Are still running the built in intel graphic card, then only download it and install at you own risk.Supports Intel(R) HD graphics on:            2nd generation Intel(R) Core(TM) i3 processor            2nd generation Intel(R) Core(TM) i5 processor            2nd generation Intel(R) Core(TM) i5 vPro(TM) processor            2nd generation Intel(R) Core(TM) i7 processor            2nd generation Intel(R) Core(TM) i7 vPro(TM) processor            Intel(R) Pentium(R) Processor  900/B900/G600/G800 Series            Intel(R) Celeron(R) Processor 700/800/B700/B800/G400/G500 Series

  • Left mouse button does not work after last upgrade on one computer.

    Second request -- left mouse button no longer works after latest upgrade. Uninstalled and reinstalled - did not help. Only affected my office computer. Left button works on other three search engines and other programs -- need suggestions...

    Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
    *Don't make any changes on the Safe mode start window.
    *https://support.mozilla.org/kb/Safe+Mode
    *https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

Maybe you are looking for

  • Customer line items ...dispute case

    Friends, when i go into the customer line item report (FBL5N) and click on a record it opens up a page where we see a button for 'Dispute Case'and i went there and changed the reason for case and saved it and came back to the fbl5n customer line item

  • Browser performance issue when Calling BI Publisher report from OBIEE dashb

    Hi Techies, We installed OBIEE 10.1.3.3 on SunOS 5.9 unix box.This is PROD env.We are calling BIPublisher report from OBIEE dashboard by clicking the BIP reports link on OBIEE dashboard.After clikcing the link BIPublisher report is opening in another

  • A few questions from a future user

    Hi! I am going to buy a MacBook soon. How soon depends on a few things which I hope some of you can inform me about. 1) Will there be any changes to the MacBook when it is delivered with Leopard? For instance, will I be able to get more RAM, a bigger

  • Need help!!!! Links missing??? Plugin???

    Guys/Gals Please help. I need your advice. A client provided me a document made in ID CS5. He saved it in CS3 so that I can open it (my version) and modify it. When I open it, it says it has 37 missing links (all images are missing). So I replied I n

  • Getting prg name of assigned smartform

    hi experts, if i wanna know the z-smartforms assigned to a z-program.How can it be done?? ex : zmaterial1 is my smartform and it is called by prg zprg1.But after 2 days i forgot the prg and now i want to find the respective assigned program for this