T61 Motherboard changed - Things to do ? New Modell Nr. ?

Hello,
because of NDIDA defect my motherboard was changed by a service company to one with an INTEL grafic ship instead of NVIDIA. New FRU is 41W1487 instead 41W1489. It runs fine, but I have further questions before reinstalling system.
- does my system now have a new model number (old 7664-1GG),
- how to search lenovo driver/bios updates for this board ?
- if I use recovery (from HD) option, does this run without problems ?
- will Thinkvantage recognize the new board so, that update will be the right ?
- any other things to do ?
Thank you all
Hans
Solved!
Go to Solution.

You can do a reinstall from a set of recovery discs , or you can install windows from a windows setup disc. As for the new model number, that is normal, your board is different so it should recognize this. I'm sure the repair shop discussed the fact that they were changing your board so your drivers and software would be different, so a small amount of adapting to this is required, but it's really not a big deal. If it was my system, I'd just remove the recovery software, it's taking up a lot of space and although its very nice to have back when the software and operating system were new, but now, if used it would update you to 4yo software drivers, so it's not of much use (In my opinion).
ThinkPad W-510 i7-820QM(1.73-3.06GHz) Quad Core... ThinkPad T500, T9900, 8gb SSD...FrankNpad T-60p/61p (X9000 2.8ghz) 8gb SSD ips FlexView...ThinkPad T-61p (T9300 2.5ghz) 8gb ram...Thinkpad X-61 Tablet 4gb ram...ThinkPad A-31 (1.9ghz P4 1.5gb ram)

Similar Messages

Why does firefox keep changing things up with new versions?

It really bothers me that Firefox keeps changing things, namely the user interface with new versions. They move buttons around like the back / forward, and refresh button. If I don't have the latest version I get prompted to download it each time I open my web browser. Now with this latest update I got a good inch and a half at the top of my screen that should be gray but is transparent and shows my desktop background. Also, I like to right click and 'open link in new' tab a lot, I thought it used to be 'open link in new window' first than 'open link in new tab' second. They switched them around now I'm opening new windows instead of tabs from clicking the second option by habit. Its not that big of a deal but why keep changing it up when I'm comfortable with what I know.

You can use Themes or Personas to change the display of Firefox browser.
* https://addons.mozilla.org/en-US/firefox/themes/
* https://addons.mozilla.org/en-US/firefox/personas/
You can Middle-click a link using Mouse or use '''CTRL + Left-click''' shortkeys to open a link in a New Tab. See these articles:
* [[Mouse shortcuts]]
* [[Keyboard shortcuts]]
Check and tell if its working.
Not related to your problem but some of your Firefox Plugins are out-dated, so you need to Update them.
-> Update All your Firefox Plugins by visiting the following link:
* http://www.mozilla.com/en-US/plugincheck/
* '''When Downloading Plugins setup files, Remove Checkmark from Downloading other Optional Softwares with your Plugins (e.g. Toolbars, McAfee, etc.)'''

HT3255 Changing MacBook Air to new model

I just bought my MacBook Air in April 2013, now in June 2013 Apple have upgraded to a new model which is really unfair. Can I change it?

Just do like I do.
My family budget contains a line item of $2100 for new computer hardware each year.
As a result, I have bought a new Mac each year for the last 6 years straight. The last three have been Airs.
Do you think Apple has a loyal sucker, here? Maybe, but I am happie.

I just bought a new Macbook air 3 weeks ago and now there is out a newer model

I just bought a new Macbook air 3 weeks ago here in Thailand and found out that since 3 days the new ones where lunched. is there a chance to get the new one for no charge? it happend to me with the iphone in the US before and apple changed it to the new model for no charge. But does this service work for Thailand too??

After 3 weeks, probably not, but it's up to you to at least try. If you purchased your computer through Apple's online store in Thailand, there's a phone number you can call. If you purchased the product through a premium reseller (iStudio, for example), you should take it back to the store. If you purchased it from a dodgy storefront in Pantip Plaza, or MBK, you can always ask...but, I'm guessing that they won't help.

I am facing a problem in my IPod . it is not detected by computer i tried every possible thing i changed cable i installed new itunes still its not coming up in itunes. can you please help me regarding this problem.

i am facing a problem in my IPod . it is not detected by computer i tried every possible thing i changed cable i installed new itunes still its not coming up in itunes. can you please help me regarding this problem.

This is for Windows: http://support.apple.com/kb/TS1538

How to customize Category and Category items list while creating New Model

Hi,
what the most convenient way to customize the Category and Category items list while creating New Model?
This is standard:
Now, what we want to achieve, is to customize this menu, to:
1. Display in the Category window only f.e. two categories:
- EA Diagrams
- BPM Diagrams
2. In the EA Diagrams, we want to have f.e. four copies of City Planning diagram, each of them should have different elements available, f.e. in the first copy, only Architecture Areas shall be made available, in the second one Architecture Areas and Business Functions, in the third on f.e. only Business Functions shall be made available. Additionally, it should behave like a hierarchy ... meaning you can create the second diagram, only as child (related diagram) of the first diagram etc.
I know, excluding the particular diagrams/diagram elements can be configured using the right/profile settings, but how to:
1. Customize the standard New Model menu window
2. Create copies of City Planning Diagrams with different set-ups
3. Set the relationship between diagrams
Is such a configuration change possible?
Thanks a lot for your help!
Regards,
Rafal

Now, what we want to achieve, is to customize this menu, to:
Question #1. Display in the Category window only f.e. two categories:
- EA Diagrams
- BPM Diagrams
Click on Tools => General Options=> Model Creation
Click on Properties => at right of Default category set
Note : Model template does not work as Category. We can't set. An enchancement request has been open to SAP
In the following example I defined a new default (MyNewDefault.mcc). As you can see only BPMN models are available.
To create a new category set with BPMN choice
a) Copy default.mcc in MyNewDefault.mcc file.
    Go to Tools=>General Options=>Model Creation : Select your new category
    Go to Tools=>General Options=>Model Creation : Edit properties and remove all things you does not want keep
or
b) Go to Tools=>General options=>Model Creation : Edit properties and click on Save as button and specify the file name "MyNewDefault".
    Quit the window.
    Select you new category : Go to Tools=>General Options=>Model Creation : "MyNewDefault"
    Edit properties and remove all things you does not want keep.
    Save you new category
Question #2. How to define copies/replicas of existing diagrams
     Wrote an extension
Question #3. How to make sure, particular diagrams can be used (created) only on predefined "levels" and how to set the parent-child relationship, so that PD enforced it directly when creating a new diagram.
     Specify yours conditons in your extension attached to your model
     Example : When the user want create a child diagram : You can display a list of Parent Diagrams to select from.
     You can set in your extension by VBScript parent-child relationship
Question #4 In the EA Diagrams, we want to have f.e. four copies of City Planning diagram, each of them should have different elements available, f.e. in the first copy, only Architecture Areas shall be made available, in the second one Architecture Areas and Business Functions, in the third on f.e. only Business Functions shall be made available.
If I understand well your question. I suggest to take a look in
Repository=>Administration=>Objects Permission Profile
You can specify objects to show, mask, deactivate at model level.
You can specifiy your own metadata.
But I'm not sure you can mask, deactivate functions following diagram selection. It seem to specific.
Message was edited by: Benoit Le Nabec

IPad 1 Safari Crashes Constantly and getting worse day by day. Has Apple come up with a solution? Now I am hearing its alos happening on the newer models. My company is about to buy a lot of tablets and I will not recommend Apple anything til they fix.

iPad 1 Safari Crashes Constantly and getting worse day by day. Has Apple come up with a solution? Now I am hearing its also happening on the newer models. My company is about to buy a lot of tablets and I will not recommend Apple anything until they fix the problem. Granted 30 or 40 iPads is not a huge impact but i promise once the outside world hears about this BS things will change. There are plenty of other tablets out there that do not have this problem. At the very least we should have the option of rolling back to a stable IOS...

I have already tried all the things mentioned above as well as other things such as other browsers etc. Its is obviously a problem with the hardware. I also borrowed a brand new 4th gen iPad and it does the same thing. Even after upgrading it to 6.01. An occasional crash is one thing and can easily be waved off but this is clearly systemic and the problem appears to be related to graphical images and videos. Both iPads are the 64gb versions, the only difference other than model is the iPad 1 has ATT cellular. The new version is clean i.e no other APPs loaded other than what came with it. I have 7 more coming but im seriously considering sending them back in favor of an Android tablet or the MS Surface.

ITunes cannot recognize iPhone/iPad via WiFi Sync following motherboard change

Hi folks,
I'm having a problem with synchronising my iPhone (and iPad) to iTunes on Windows 7 Home Premium via WiFi sync.
This never used to be a problem - both devices would be identified by iTunes (occasionally this was sporadic, however a simple WiFi off/on would usually solve the problem).
I have recently upgraded my motherboard and CPU in my Windows 7 PC and after updating some drivers, etc. all of a sudden, I cannot connect to WiFi Sync anymore. I can still synchronise my devices via the cable - i.e. the devices are correctly identified by the PC, but for some reason post the motherboard change, as soon as I pull the plug out of the device, the device disappears from iTunes.
I can confirm that the "Synchronise this device via WiFi sync" tick boxes are checked, and the Machine Name is the same, so my iPhone is still looking for the same PC.
I'm wondering if because of the motherboard change, there is an internal signature that the iPhone/iPad looks for that is no longer the same.
I have tried uninstalling and re-installing iTunes to no avail. I cannot seem to find any solution to this problem - no matter what I do, iTunes will simply not recognise my devices over WiFi anymore.
Welcome any advice or thoughts.
System details:
- Intel i7 2700K (Upgraded from Intel i3 550)
- ASUS P8Z68-M Pro (Upgraded from an ASUS P7H55-M/USB3
- iPhone 4S
- iPad 2
- Windows 7 Home Premium
Cheers,
Mike.

Folks,
I thought I should post a follow up - in case any Apple Support people scour these forums.
The problem seems to have resolved by itself, which is both a good and bad thing.
I made absolutely no changes last night, not even a system reboot, to launch iTunes today and the system miraculously discover both my iPhone 4S and my iPad 2. I think this highlights a broader problem is that the WiFi sync capability is inconsistent and very difficult to troubleshoot. I have no idea why it has all of a sudden started working, especially when I have changed no wireless, networking, firewall or Anti Virus settings.
Anyway thank you to those who had a read, and I wish I could provide more insight on why it has started working all of a sudden, and importantly, what caused it to stop working.
Perhaps it is simply like two people - the new PC and its motherboard needed to 'get to know' the devices before it felt comfortable in allowing a connection .
I have no other more rational explanation!
Cheers all,
Mike.

Problem Connecting with SAP R3 for creating new model

Hi,
i have a problem with connecting to the SAP R/3 when i want to create a new model with BAPIs.
The error is:
Internal Error has occured.
Plugin name: Web Dynpro Model Editor Services
Method: next Pressed
Message: Internal error - see detail information in exception trace.
Exception: Failed to execute runnable
How do i get to the exception trace, or what could be the problem?
Regards. Stefan

Hi, thanks for your answer.
I changed the things, but now this problem appears.
org.eclipse.swt.SWTException: Failed to execute runnable (java.lang.ExceptionInInitializerError: JCO.classInitialize(): Could not load middleware layer 'com.sap.mw.jco.rfc.MiddlewareRFC'
JCO.nativeInit(): Could not initialize dynamic link library librfc. Found version "620.0.941" but required at least version "620.0.1220".)
What can i do with this mistake?

Change default destination of arfc2 model

Hi
With the old JCO arfc connections it was possible to change the default jco destination by passing the application parameter (in the iview) sap-wd-arfc-useSys. So we could use the same WDJ application with different backendsystems... for example the default destination was WD_MODELDATA_RFC, we created a destination WD_MODELDATA_RFCB for a other logical system and set the iview parameter sap-wd-arfc-useSys=WD_MODELDATA_RFC:B (same thing for the metadata connection).
Now, after migrate the application from 7.0 to 7.31 the new rfc model arfc2 is used and we can not switch the destination. To set the application parameter has no effect and the default destination is choosen evermore.
How can we change the default destination of an arfc2 model?
Thanks in advance.
Regards David

Hi Shankha
Instancing the model with "new Model(system, client)" didn't worked for us neither.
But we found a solution with the following configuration that work for us.
set following iView parameter:
"Application Parameters" = rfc_system=X&rfc_client=999
create JCO Destinations as followed:
WD_ELOWF_METADATA_DEST_X999
WD_ELOWF_MODELDATA_DEST_X999
I hope it works also for you.
Kind Regards
David

How can anyone buy new model cameras without RAW support forecasts?

If a person wants to buy a camera and wants to use Aperture, what can they do? I'm sure I want to shoot RAW images, and I'm sure I want to use Aperture, but how does one buy a new model camera when they don't know what drivers Apple is working on adding?
I bought Aperture2 last spring and learned to use it with JPEGs, hoping to use it to shoot RAW images with a newer camera. I've researched cameras and narrowed the field, but when I went to the list of cameras supported by Aperture3, I was horrified. All of the cameras I chose shoot RAW, but almost none are supported in RAW yet, and there seems to be no evidence that they will. I've worked kind of hard, partly learning Aperture, partly researching RAW cameras, and now I'm kind of in shock.
For example, the Canon t2 just came out - the t1 is covered, but how long until the t2 will be supported? Many of the top bridge cameras I'm considering also appear to be missing from the new Aperture3 list - like the the Sony DSC-HX1, the Panasonic Lumix FX35, and the Fuji S200EXR.
I appreciate the RAW support for familiar models, and I appreciate the DNG conversion connection thing - that helps. But what if Apple never comes out with RAW for my new camera after I've committed to it? Adobe Lightroom RAW support list looks a little longer, but is still not much for new bridge cameras. Why should Apple try to keep pace with Adobe, anyway? Why not have an insanely great list of RAW support? Is it that hard to configure devices before they come out?
I could use some reassurance here.

Thank you all for your insightful feedback.
I originally wrote:
+If a person wants to buy a camera and wants to use Aperture, what can they do?+
Ultimately, I bought a camera that I liked better than any in my price range ($500 or less) that shoots RAW, and is already on Apple's list -- a Canon G11. I want to get a good DSLR later when I can afford one, and then my G11 will make a superb and sturdy "pocketable" camera. The G11's flexible features are already helping me to learn not only about shooting RAW, but about photography in general. The pictures are gorgeous.
I'm using my new camera with Aperture 3, and it's great. I think iPhoto is good for many people, but for those like me who want to do more with their photos, and need a more sophisticated work flow - well, there's not much comparison between them for these purposes, even though they share so many features now (faces, places, et al).
I also wrote:
+For example, the Canon t2 just came out - the t1 is covered, but how long until the t2 will be supported?+
Well, Apple got the EOS t2i raw converters into Aperture faster than I could get this post up. They were very, very quick. The more I learn, the more I see how many mainstream cameras Apple does support, and the more I appreciate the problem of supporting new cameras that Apple faces. But I still hope they keep facing it, and don't let up.
Clearly, there are always interesting cameras coming that may never be supported, and being able to handle RAW images outside Aperture may be some people's reasonable choice.
I came very close to buying several cameras that were unsupported or didn't shoot RAW at all. But I've already seen RAW save my pictures. I accidentally took a group of important photos with no white balance at all (they're pale green). Fortunately, I was shooting JPEG+RAW. The JPEGs are nearly useless, but the RAW photo's adjusted quickly to "just right".
Knowing I can make certain non-destructive edits with RAW files is very liberating. I know if I make a mistake or want to change the image, that there are a few vital parameters I can adjust.
As to my camera selection: I chose the G11 because so many people with real photography experience seemed to respect it so much. In the end, I decided that good image quality was more important than pixels, zoom range, etc. Since I decided to wait to get a DSLR, I wanted a versatile point-and-shoot with a retractable lens that would become, as I said, my second, more portable camera later.
I've experienced the companion Canon software now as well. It's fine, but I like organizing my photos in Aperture better. I especially need stacks, and being able to make major adjustments where I keep my photos is vital to me.
Now, Aperture is working well for me, and the experience is turning out far better than I had expected. I'm now loading directly into Aperture instead of referencing iPhoto, I'm handling raw images from a new, more modern camera, and I'm finally feeling settled and comfortable with my image workflow.

Elitebook 2540p Motherboard changed. Integrated motherboard IDT audio device missing in windows 7.

Hi,
Old situation:
(I recently changed motherboard for my computer Elitebook 2540p. When i installed windows 7 to my computer the computer doesn't list any audio devices in device manager page. I've checked bios for any faulty settings and they are all set right. Theres no yellow marks in device list either and all drivers seems to be installed.)
New situation:
Installed windows 7 again and computer found / installed audio devices normally. I tested computer for hours to play audio from it and everything worked fine. I restarted computer several times / re installed battery to the computer. On one restart the computers audio quick mute button below the screen appeared to be orange and the sound speaker icon in windows was marked as X. I check device list again from device manager and there was no audio devices listed (No sound devices at all). After that i restarted computer and before the computer started downloadin windows i pressed the mute button and it turned blue. I then went to windows and sound devices / sound was working again.
Old situation:
I have motherboard integrated IDT audio device.
When i try to install audio drivers from hp site for 2540p i get "Your system does not meet the minimum requirements for this update." And the device manager doesnt list any IDT audio devices.
I then installed xp and the computer found IDT audio device normally and the sounds are working correct.
New situation:
After i did new windows 7 install and all my audio drivers installed / devices showed in device list / audio worked i downloaded audio drivers from HP driver site and installed them to the computer.
Audio problems has not been occured again after my HP screen mute button turned to orange / Windows sound speaker was marked as X / Computer didn´t find any audio devices.
Currently waiting if the problem occurs again and trying to think what would cause this ( Hardware problem or software)? And how to fix it permanently.
Any help for this problem?
BIOS is updated to newest version from HP driver download center.
All windows drivers are installed.
Motherboard info: Product Number VB841AV
Product Model BU RCTO i7-640LM fMdm 2540p
598762-001 MB SYS W/PROC CORE2 DUO 2.13 GHZ

Hi Jarppi,
Welcome to the HP Support Forums! To get your issue more exposure I would suggest posting in the commercial forums since this is a commercial product. You can do this at http://h30499.www3.hp.com/hpeb/
I hope this helps!
HevnLgh
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

ITunes is updated and works fine and I am able to log onto my account. When I go to purchase a song, I get the error message "Your Apple ID has been disabled". I've tried different methods: changing passwords, making a new account with another email addre

iTunes is updated and works fine and I am able to log onto my account. When I go to purchase a song, I get the error message "Your Apple ID has been disabled". I've tried different methods: changing passwords, making a new account with another email address, and emailing itunes tech support. I am curious as to how many others have been experiencing the same issue. When I googled the error, it seemed like it was happening extremely often with many people.
We all love their products, but they always come with a lot of issues and horrible customer support.
My apple Id is [email protected]

My Iphone 4 is telling me the same thing and I believe I figured out what the problem is. I had some fraudulent charges on my itunes account, so I call my bank and disputed the charges. Right after I did that, I started getting the message "Your apple ID has been disabled." I just realized today that the charges are not fraudulent, they are "in app purchases." One of my daughters downloaded the game Top Girl which is FREE, but in the game Top Girl you use money in the game to purchase things. It just so happens that the money you use to purchase things is real money MY Money!!!. My daughter thought she was using play money in the game and had no idea she was using real money. She spent $106.00 buying stuff. Now I have to call the bank and tell them to release the hold and pay Itunes. I'm hoping this solves the problem. Here is the link to learn how to disable "in app purchase" on your iphone or ipad.
http://www.ikidapps.com/2010/12/parents-avoid-accidental-app-purchases-how-to-tu rn-off-in-app-purchasing.html

Newer models support??

My white MB video out to DVI then DVI to HDMI only gets video out without audio.
Do newer models get both video and audio out??
Thanks.

Hello,
I was just wondering about this very thing; I have a MacBook7,1 (purchased Dec 2010) and want to hook it up to my flat screen HDTV and was wondering if I needed to buy a separate audio cable.
I read that now MBP have the audio through the MDP; however, if I understand correctly this does not extend to plain vanilla MB7,1.
Would someone be kind enough to confirm this statement. Thank you

Activate change pointer for a new screen field in MM42/41

Hi,
I created a new screen field for Article master(MM41/42/43) under basic data. If there are changes made to this new field how will the system create a corresponding IDOC? does this have something to do with the change pointer thing?
Thanks,
Jeff

Hi Jeffrey,
first of all got transaction SALE :
ALE
-> Modeeling and Implementing
-> Master Data Distribution
-> Replication
-> Activate Change Pointer generally
Check if Changepointers are generally on.
Then goto BD50 and activate change pointers fpr message type.
Finally goto BD52 and check if your field is "watched".
After that you can generate idocs from BD21.
Hope it helps.

T61 Motherboard changed - Things to do ? New Modell Nr. ?

Similar Messages

Maybe you are looking for