T61 reacts to power button but stays silent

I recently dropped my Thinkpad T61 (model 6459). The laptop was off and in a padded bag, but apparently the fall was still sufficient to cause a problem. If it's at all relevant, it appears to have fallen such that the screen's top-left corner (if looking at the laptop while open) hit the bottom of the bag.
Now, when I push the power button, the battery and power-plug LED's below the display light up for about a second. The LED next to the two USB ports on the right also lights up. The fan does not spin up, the screen does not turn on, and the system makes no noise.
The system doesn't react to the power button for about five seconds after the LED's turn off. Pushing it after that just yields the same behavior: LED's on for one second.
If plugged in, the battery is charged and the LED's reflect the charging state.
I have tried reseating the DIMM.
Do these symptoms seem familiar to anyone? I understand the most likely culprit is the system board, but before I go hunting for one on eBay I'd like to see if there are more specific diagnostics I could do to narrow the problem.
Thanks.

You should probably take apart your laptop and then put it back again, to make sure all the connection hasn't came loose during the fall. Also try to reseat your CPU and fan/heat sink.
You could also try to reflow your motherboard as the last resort, there is video on the internet that teaches you how. 
Here is the hardware manual that teaches you how. 
http://www-307.ibm.com/pc/support/site.wss/MIGR-67980.html
Regards,
Jin Li
May this year, be the year of 'DO'!
I am a volunteer, and not a paid staff of Lenovo or Microsoft

Similar Messages

  • My ipod touch won't turn on....I've tried to hold the home button as well as the power button, but it still won't work.How do I fix it?

    Please can someone help me fix my ipod :/ Ive tried holding the home button as well as the power button but it did not work.PLEASE HELP ME!!!!!!!!!!!

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on another computer
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar       

  • What to do now when my iPad won't turn on after I turn it off. It shows only the apple logo. I am sure it has above 70% charge as when I sync my iPad it shows necessary detail in iTunes. I have tried, HOME & POWER button, but did not work.

    What to do now when my iPad won't turn on after I turn it off. It shows only the apple logo. I am sure it has above 70% charge as when I sync my iPad it shows necessary detail in iTunes. I have tried, HOME & POWER button, but did not work.

    First try a Reset  ( No Data will be Lost )
    Press and hold the Sleep/Wake button and the Home button at the same time for at least Ten seconds... (But can take Longer)... until the Apple logo appears. Release the Buttons
    If no joy... Try a Restore...
    1: Connect the device to Your computer and open iTunes.
    2: If the device appears in iTunes, select and click Restore on the Summary pane.
    Restoring  >  http://support.apple.com/kb/HT1414
    Make sure you have the Current Version of iTunes Installed on your computer
    iTunes free download from www.itunes.com/download
    3: If Unable to Restore, try using the Steps in this article to force the device into Recovery Mode.
    Note on Recovery Mode.
    You may need to try this More than Once... Be sure to Follow ALL the Steps...
    After you have Recovered your Device...
    Re-Sync your Content or Restore from the most Recent Backup...
    Restore from Backup  >  http://support.apple.com/kb/ht1766

  • My phone just turned off and won't turn back on. I've read the posts saying to hold down the home and power button but my power button is broke. Any suggestions?

    My phone just turned off and won't turn back on. I've read the posts saying to hold down the home and power button but my power button is broke. Any suggestions?

    There is a thread or two about the home button and how to fix it at least temporally.  It sounds like some people have found it to be a rather permanent fix.  Do search on something like "Home button won't work".  It has something to do with putting the charging cable into the phone and applying a little extra pressure upward on the key.  Don't take my word for it though look for the thread/s.  You said originally that your "Power" button was broken and the thread I have seen is about the Home Button. 

  • HT201412 my iphone ( 4 ) suddenly switched off...i press several time in power button but not working.pls advice me

    my iphone ( 4 ) suddenly switched off...i press several time in power button but not working.pls advice me

    hold the power button and home button for about a minute
    plug it into a computer with itunes on
    either way should work

  • Imac opens with message to restart by holding down power button but nothing happens

    imac opens with white on black message to restart by holding down power button but nothing happens

    Sounds like a kernel panic.
    What is a Kernel Panic?
    http://support.apple.com/kb/TS3742
    and  http://support.apple.com/kb/TS1892?viewlocale=en_US
    http://developer.apple.com/mac/library/technotes/tn2002/tn2063.html
    More details here:
    http://www.thexlab.com/faqs/kernelpanics.html
    Useful article on how to avoid and eliminate kernel panics here:
    http://reviews.cnet.com/8301-13727_7-10344626-263.html?tag=mfiredir

  • My macbook won't start up i have used the option command p r while holding down power button but not done.. please help guys

    my macbook won't start up i have used the option command p r while holding down power button but not done.. please help guys

    It not polite to repost asking fro more help three minutes after initial post.
    Recovery mode is Command & R keys after depressing and releasing the Power button  for a normal startup.
    OS X: About OS X Recovery - Apple Support
    That only works for Lion and later.
    What exactly happens when your try to boot to Recovery?
    Try starting in Safe Mode resetting the SMC and NVRAM/PRAM
    OS X: What is Safe Boot, Safe Mode?
    Intel-based Macs: Resetting the System Management Controller (SMC)
    About NVRAM and PRAM
    What model MacBook Pro and what OSX version was on the Mac?
    Have you tried booting from an OSX install DVD?
    When you try to start doe the Power light light?
    This is the Mac Pro desktop forum. I requested your post be moved to the MacBook Pro laptop forum.

  • My MacBook Air is not charging and not lighting to orange and green, try what I saw in the net by pressing (shift-ctrl-option   power button) but still same problem not charging,only it turned off but when I turn it on again nothing happens.. Pls tell me

    My MacBook Air is not charging and not lighting to orange and green, try what I saw in the net by pressing (shift-ctrl-option   power button) but still same problem not charging,only it turned off but when I turn it on again nothing happens.. Pls tell me

    Wrong forum. This is the iPad forum.

  • I tried to restore my iphone 5s but it shut off during the restore and wont turn back on I tried reseting it with the home and power button but it doesnt work and I tried connecting it to itunes but it doesnt show up

    I tried to restore my iphone 5s but it shut off during the restore and wont turn back on I tried reseting it with the home and power button but it doesnt work and I tried connecting it to itunes but it doesnt show up

    Did you try to connect in recovery mode, as explained in this article?
    If you can't update or restore your iOS device
    If this does not work, get it checked by an Authorized Apple Service Provider or by Apple:
    iPhone - Contact Support - Apple Support

  • Windows 8 (Stream 7) reacts like power button is being held down

    So I just got home from work and sat down to browse some web sites and eat. When I was done I hit the sleep button but shortly after the screen went out, windows came back with the slide down to shut down slider.
    It just sat there waiting for input, I would slide it up (no) and then hit the sleep button again only for it to wake up again asking me if I want to shut down. At first I thought the power button broke, I even shut down the tablet and started it again and it still did it. I would put it to sleep and it would wake up asking me to slide the lock screen to shut down. 
    Now the thing is... if the power button really WAS stuck.. 3 things would happen;
    #1 as per Bios software these days, holding the power button for more then 10 seconds is a universal "power down" command. Especialy on devices like these where the battery can't be disconnected. This power down command is almost allways part of the hardware so that it works incase of software failure. 
    #2 pressing the stuck power button when the tablet was on wouldn't put it to sleep. 
    #3 the tablet would be powering back on when powered off. 
    Now the thing is, this issue is NOT HAPPENING NOW! As if related some how, during the 15 or so minutes this happened, when I booted the tablet up holding it in portrait orientation the HP logo was correct but the windows lock and password screen were stuck in landscape mode. If I rotated the tablet to landscape and back at the lock screen it would fix itself, but during this issue it seemed like the orientation of the tablet was not being acknowledged correctly during the boot sequence and the lock screen would be oriented wrong. I some how fixed it by telling the tablet to reboot from the logon screen at which point it got stuck on the shutting down screen and I had to do a hard power down. After booting up once more all was well. 
    So.. as much as it seemed like a button failure, it really looks like there was a software glitch somewhere, either the bios or windows. I was unable to find anyone having a simular issue with windows tablets. 

    Didn't find a cause, but found the solution. It has nothing to do with diagnostics or anything, but rather doing a hard reboot. You see by default the tablet is configured to fast boot. What this means is when we shut down, a small hibernation file is written for the drivers and kernal (but not the user logon and data). So we never actually shut down, we log out and then hybernate. 
    So when the glitch pops up, even if we shut down, we arn't shutting down. We don't truly reset windows unless we RESTART, or do a hard shut down by holding the power switch which doesn't allow the computer to hybrnate. Both instances force windows to load from scratch. 

  • TS2570 I have MacBook Air late 2011 with encryption enabled the mac froze so I just shut it down by pressing the power button .But the when I tried  booting the gray screen appeared nothing else

    I have MacBook Air late 2011 with encryption enabled the mac froze and I pressed the power button to shut it down but then the gray screen appeared no wheels nothing just gray. I tried all steps but nothing helped. Worse than that only the pram key combination works I cant get the cmd-r or just alt or any combination to work??? Any suggestions would help. Thanks!
    P.s. I am on mountain lion with ssd encryption enabled.  The mac froze when the internet stopped the one from the cable (I use ethernet usb one) when I turned wifi on it froze.  I have disconnected everything when trying the steps except power cable.

    Boot into Internet Recovery (command-option-R at the startup chime) and try to repair the boot volume in Disk Utility. You will have to unlock the volume before you can do anything with it.

  • Ok my iphone 3g touch screen is not responding, i can recieve calls and it can charge and connect to itunes, but i cannot go any further than using the home button or the power button, but the slide feature and touch feature is non existent

    ok my iphone 3g touch screen is not responding, i can recieve calls and it can charge and connect to itunes, but i cannot go any further than using the home button or the power button, it is only the slide feature and touch feature that has become non existent.  Also, i have a f'ew cracks in my screen for a while now and it was running smoothly up until saturday when i sat on it applying large amounts of pressure to the phone screen.  Is there a way i can fix this myself without having to recover my phone to factory settings or wasting 50 bucks to get it fixed??

    Hi Dire Dawa,
    If the screen on your iPhone isn't responding, you may find the following article helpful:
    iOS: Not responding or does not turn on
    http://support.apple.com/kb/ts3281
    Regards,
    - Brenden

  • Press Power Button but No Power

    I have a dual 1Ghz silverdoor Power Mac G4 and when I tried to turn it on today, the machine appears dead. I can hold the power button and it lights up as I am holding it but the machine doesn't do anything. Is it the power supply? This machine is pretty old but it's been pretty stable since I got it years ago. This is the first real problem with it.

    You are in the forum category for G5 Power Macs. However, have you tried this procedure to reset the PMU?
    http://docs.info.apple.com/article.html?artnum=86760

  • Ok, so heres my problem. My ipod touch 4g is stuck on a white screen I tried plugging it in the computer and pressing the home and power button but still nothing What do I do please help

    ok, so heres my problem . I have this ipod touch 4g and i was updating it to the newst version and the screen turned white i tried connecting it to the computer and nothing i pressed the home and main button but still nothing i dont want to pull it apart or anything but please help what do i do

    Let the battery fully drain. After charging for an hour try the reset (both buttons) and restore as necessary.

  • My MacBook Will Power up but stays at the loading screen.

    My MacBook will start up but stay at the loading screen with the apple logo for ever and wont go to the log in screen? why is this happening

    why is this happening?
    The disk may need repairing.
    Use Lion Recovery

Maybe you are looking for

  • To print the headings in report based on coloumn for every page

    Hi In multi layout report ,i am getting the data with headings at first page only. But my requirement is like below: ·     Report Header details applied to every new page of the generated report. A new page is indicated by each change in (<coloumn na

  • Windows 7 update fails with error 8000FFFF

    I've got a Windows 7 x64 installation that I've had for around three months.  Everything has been fine and working up until a few weeks ago.  When I run Windows Update it finds updates and allows me to select them, but when I run the install it fails

  • 9.2 create Database fails in sql.bsq

    I have installed Oracle 9.2.0.1.0. It appears to have installed correctly. I am attempting to create a new database. The script sql.bsq in %ORACLE_HOME%\rdbms\admin appears to be trying to create a cluster around line 1329. I don't use clusters (per

  • Photosmart B8550 - photo printing problems

    Has anyone else had the problem of photo printing perfectly on all papers except HP Photo paper?  I loose all my black tones when I print on the photo paper, but I bought Kodak paper and it worked.

  • Reinstall 10.7 prior to sale, not available from apple store

    Hi all I am going to sell my macbook air and replace with a new one.  I want to wipe the hard drive - which I have managed to do I want to reinstall Mac OS X Lion I follow the instruction to get to the "download from the app store" I sign in with no