T61p 6460 74M - Client Security Solution Problem

I am having problems with the Client Security Solution running under Vista
I am able to log in OK using the fingerprint reader or password however after the system boots the CSS widow appears asking for password, I enter the password but it does not recognise this and requeste retry or cancel. If I retry the password entry it advises that "Authentication Failed". I then cancel and the CSS window offers to configure the CSS - hit "Yes", requests verification of identity with password - I enter password - response is "Authentication Failed" and back to square 1.
Can the CSS be reinstalled and then reinitialised. This problem may have arisen after I upgraded my Norton Internet Security 2007 or 2008 to NIS 2009, or when I reset Internet Explorer 7. I note at this time the Password Manager dissappeared from IE7.
Does anybody have some advice please since this useful function - Password Manager - has now been either disabled or removed.
Regards Chris R.

I had problem with CSS also after installing (maybe) Norton Update. No answer from CSS at all any where, and I could not start it it either.
I reinstalled it with the application:
C:\Program Files\Lenovo\Client Security Solution\css_admin_vista_launcher.exe
An then it works again - installation will delete all store passwords!

Similar Messages

Client Security Solution problem (Vista)

I have installed the lenovo fingerprint software and Client Security Solution 8.1 on my N200 0769. Unfortunately, CSS doesn't recognize my fingerprint reader. I can logon with the fingerprint software the way it is meant, so it can't be a hardware problem.
Under Windows XP both programs worked perfectly together so I could enter login data in Firefox by simply scanning my finger. I don't understand why the software doesn't work with Vista...
3000 N200 BDG, Vista Business 32bit

I have the same problem on an X 60 platform, which only surfaced in the last two weeks subsequent to running all of the Lenovo updates. Prior to this, I had reinstalled all programs, starting with the Recovery Disks for the Think Pad. Everything, including start up, was exceptionally fast. Once I ran the most recent BIOS updates, along with several others, this error message surfaced. It is intermittent, however, and I have not noted an issue.
In reviewing several other Message Boards, I have seen this issue raised several times. Here is a link to a thread where the individual did achieve a solution through Lenovo, but their response is nonspecific as to what they did: (http://forums.lenovo.com/lnv/board/message?board.id=T400_series_ThinkPads&message.id=7143&query.id=1...

"Client Security Solution" problem - not accepting password

Hi everyone
I have t 61
and every time I start it ' I get a massage to enter my windows password to enroll on client security solution.
The password is the same as the log on onto win .
And when I fill it get an error .
If somebody can help ?

While this is likely a software issue, it is always helpful to know which model system and what OS you are running.
Sometimes solutions are driver or OS dependent.
So, what model Lenovo 3000 systems are you both running? Vista or XP?
Message Edited by Mark_Lenovo on 12-11-2007 06:36 AM
ThinkPads: S30, T43, X60t, X1, W700ds, IdeaPad Y710, IdeaCentre: A300, IdeaPad K1
Mark Hopkins
Program Manager, Lenovo Social Media (Services)
twitter @lenovoforums
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество

Client security solution TPM error message

I'm running XP on my T61 thinkpad and recently I started getting the following error message upon starting my computer:
"There was a problem connecting to the TPM (security device) on this computer. It is possible that anti-virus or firewall software is blocking the connection. A missing or disabled device driver could also cause this problem. Please refer to the online documentation for more information."
My thinkpad has also been starting to blue screen lately but I'm not sure if this is connected to the client security solution problem or not. If anyone has any suggestions I'd really appreciate it!

Who has client security, restore and fingerprint reader all working together? I did updates and when one works the other doesn’t. If I could find all three that work I would be happy. If you give me your versions numbers that works on yours that would be great. I have a T60 running XP

X61 - Vista Business - Client Security Solution Error - There was a problem connecting to the TPM

During startup my x61 has been displaying the following message, 'Client Security Solution' - "There was a problem connecting to the TPM (security device) ont his computer. It is possile that anti-virus or firewall software is blocking the connection. A missing or disabled device driver could also cause this problem. Please refer to the online documentation for more information".
I have spent an extraordinary amount of time and effort to find identify the cause and a solution for this problem. It occurs whether or not virus software is enabled or disabled and numerous calls to Lenovo, Symantec, Kaspersky, and Microsoft have resulted in finger pointing and no answers. None of the vendors acknowledge the problem yet this same issue is a significant topic of concern as found in various blogs and 'help' sites. Lenovo thought it was hardware and changed the motherboard. Lenovo told me to call Microsoft since it was a Vista issue. Microsoft told me to call Lenovo since Vista Business was preinstalled on the machine. Lenovo told me to call Microsoft and so it goes. I removed Symantec's anti-virus and replaced it with Kaspersky.
The strangest thing is that the module works intermitently and it seems that everytime a Lenovo update is performed (via Thinkvantage) the problem reoccurs for sometime.
Does anyone out there have an understanding of the cause and a potential solution???

I have the same problem on an X 60 platform, which only surfaced in the last two weeks subsequent to running all of the Lenovo updates. Prior to this, I had reinstalled all programs, starting with the Recovery Disks for the Think Pad. Everything, including start up, was exceptionally fast. Once I ran the most recent BIOS updates, along with several others, this error message surfaced. It is intermittent, however, and I have not noted an issue.
In reviewing several other Message Boards, I have seen this issue raised several times. Here is a link to a thread where the individual did achieve a solution through Lenovo, but their response is nonspecific as to what they did: (http://forums.lenovo.com/lnv/board/message?board.id=T400_series_ThinkPads&message.id=7143&query.id=1...

A problem with Client Security Solution patch for Mozilla Firefox3

After I updated Client Security Solution to 8.20, the password manager cannot work in FF3 again.When I tried to reinstall the patch, it asked me whether to overwrite the files or cancel. Then it indicates 'This patch has already been installed on this computer', but the problem exsits.

Borntofly, I am glad that you brought this up as I have not been able to successfully use FF3 with CSS 8.1 or 8.2 and have provided feedback in this thread:
http://forums.lenovo.com/lnv/board/message?board.id=Special_Interest_Utilities&thread.id=937&view=by...
As much as I would like to upgrade to FF3, I have not had any success in either using the manual configuration changes noted in the above thread or by using the CSS Patch for FF3 provided by Lenovo on 8/6/08 found here:
http://www-307.ibm.com/pc/support/site.wss/document.do?sitestyle=lenovo&lndocid=MIGR-70132
This patch appears to duplicate the manual efforts provided by member KTP in message 12 in the above provided link from what I can see.
I have never had an issue using the TV password manager and IE7. It is a very reliable combination.
I have no issues at all using FF 2.0.0.16, CSS 8.1 or 8.2 (now on 8.2), and Thinkvantage (TV) Password Manager 3.00.0106.00 (came with CSS 8.2). I have never had Lenovo Password Manager on my T60. Everything works reliably well with this combination.
In 3 hours of work yesterday, I was able to get TV Password Manager to show up in the FF3 add-ons as TV Password Manager 3.01 and this is the only way I was able to make it work, but only for a single browser session:
1. Tools --> Add-Ons
2. Disable TV Password Manager, then restart FF3
3. Tools --> Add-Ons
4. Enable TV Password Manager, then restart FF3
5. TV Password Manager will work for the duration that I am using the browser session
Once I close FF3 and reopen it, TV Password Manager no longer works. The only method I have found to "reset" everything is to perform the above sequence, but again it only works for the single browser session. It is very consistent. Although in does not show this in the Add-Ons page, it almost appears that the TV Password Manager add-on is disabled after I close the browser and needs to be manually disabled then enabled as noted above. If this is due to a conflict with other software on my laptop, I have not been able to determine this.
In my efforts yesterday, I spent time uninstalling CSS 8.1 or 8.2, FF, and even removed registry entries related to these packages in order to start with a fresh install, all without any success. I tried fresh installations and added the manual changes promoted by KTP and also tried fresh installations using the Lenovo patches, all without success. I made attempts to troubleshoot to root cause by removing all add-ons except TV Password Manager, and also tried preventing certain software from installing at startup via msconfig, as well as multiple settings changes within FF3, all to no avail. Again FF 2.0.0.16 continues to work very well with little effort on my part. I simply install the software and ensure that TV Password Manager 2.0 in installed in the add-ons and that's it.
In the above FF3 thread, it appears that others have had success with KTP's changes so I am a little frustrated that I cannot make FF3 and TV Password Manager work reliably. I have FF2 and IE7 working so I have plenty of good alternatives at this time. I will post this at the FF3 above as well to see if anyone has any feedback.
Moderator(s), do you wish for this thread to be integrated in the original thread for this issue?
T60, 8744-5BU: 2.0 GHz T7200, 4 GB RAM, 15.4" WSXGA+, 1680x1050 ATI Mobility Radeon X1400, Win 7 Ultimate w/SP1 - 64-bit

Client Security Solution password problem

I have just had my computer reformatted to the factory settings. I wanted to avoid having to enter my password each time I logged in but, as has happened before, I forgot what the process was. Eventually I made my password blank and did something else (?) which meant that I wasn't asked for a password by Windows. Unfortunately Client Security Solutions now asks me to validate my identity ("Your Windows password was changed recently. Please enter your Windows password to synchronise with Client security Solution".)
I have just given myself a new Windows password and will see how it goes with Client Security Solution once I reboot. My basic aim is to bypass the Windows password screen.

Since my last message I have reset my Windows password. I no longer get the message from Client Security Solution, instead Windows tells me that I have entered the wrong password. All is OK if I then enter the new password.
Perhaps this query should be placed on a Windows forum? I have set Windows to bypass the password entry screen, so If it weren' for this problem I would never have to enter a password.

T61p Client Security Solutions + Password Manager + Two Operating Systems

Greetings.
I am running both XP and VISTA on my T61p. I use the client security solutions password manager feature for websites and network shares. Since my model has the biometric scanner instead of entering the user ID and password I just swipe my finger. The issue is that when I first setup client security solutions it creates some system key that I assume is tied to the security chip hardware. Once I have it setup and working under one operating system it fails to authenticate me under the other operating system. It brings up a windows that says, "Verify Identity" / "reason for authentication: system key recovery" Why am I not able to use this feature under both operating systems?
Thanks for your time.
XSYLUS

Thanks for the reply.
I was using an older version of RnR, however, after the attempt to re-install, I upgraded to the latest version. It still errors out.
As to your second guess, I was hopefull this was the fix, I had forgotten to go through the registry. I deleted an empty CSS folder in the Common Files folder. And found several registry entries which have now been deleted. I don't believe I missed any. But unfortunately no luck. I cleared the chip again as well.
If it adds any clues, the system update was not working either. But the language fix posted on the forums resolved it. If I remember correctly the first time I tried to reinstall CSS it did ask a question/comment about language not matching. I could be wrong, however, there have been alot of attempts.
I spoke with tech support on the phone with the only suggestion being a clean restore of the laptop which I would like to avoid.
Thanks again.

The power meter, and Client Security Solution, Rescue & Recovery problems?

Hey guys,
I just love my Lenovo X61s...
Everytime I boot it up(BTW, I run XP) I login and CSS asks me to verify my authentication, and always fails. I HAVE read posts by other people reporting the same problem, and I've read that clearing the TPM thing in the BIOS will solve it, but in my case it just doesn't!
Also, a power meter just beside the System Notification Tray, doesn't always show up, and hence sometimes when I shut down, a 'PwrBnkGndWindow' end program window pops up! Can anyone please please help me in solving my problems!?

Based on your description I don't think Rescue & Recovery or Client Security Solution have any value for you.

Client Security Solution - System Key Recovery - After Lenovo Service

I have a T61p running Windows 7, which I recently had to send to Lenovo for service after the video failed. According to my repair summary, the motherboard on the computer was replaced.
I received the laptop back today, and now when I log on, the system comes up with a window from Client Security Solution asking me to "verify my identity" with "reason: system key recovery."
Unfortunately, the program will not recognize my password, and I get an error message that authentication has failed.
I tried calling Lenovo's support number, since the problem seems to be directly related to their replacement of the motherboard, but I received the response that "that's a software issue, we can't help you."
Any help on this is much appreciated!

hey shannonw,
could you try uninstalling the Client Security Solution software and then reinstall.
once done report back on what happen after.
WW Social Media
Important Note: If you need help, post your question in the forum, and include your system type, model number and OS. Do not post your serial number.
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
Follow @LenovoForums on Twitter!
Have you checked out the Community Knowledgebase yet?!
How to send a private message? --> Check out this article.

Client Security Solution with TPM

Hi,
after upgrading the z61p from XP to Vista I am not able to get the client security solution (css) up and running.
I always get amessage form css on the screen that an error occurred during connecting the TPM on this computer (sorry, I'm using the german language versions, therefore my translation might not be exactly the same what you get from the english version).
The message-box shows the additional hint, that the problem might be caused by the firewall or an antivirussoftware (both are actually disabled).
What I tried out already:
- delete and reactivate the TPM before installing css
- delete TPM (without reactivation) and install css
- connected to my domain, and not connected
- firewall disabled and enabled
- antivirus running and stopped
Has anybody an idea what else I can do to get the css with the password-manager up to work??
Regards - Rudolf

Nop.
I'm a little bit frustrated by Lenovo, because of the poor support.
The notebook is excellent, but the support .....
In other newgroups if the members are not able to answer or solve the problem the supplier/moderator does.
Here it seems to be different.

Client Security Solution

Hi,
I bought X60 a year ago but with recent restores, everytime I boot up there's a message :
[Client Security Solution : There was a problem connecting to a critical service. It is possible that anti-virus or firewall software is blocking connection. Also, check to make sure that the TPM device driver is installed and enabled].
I have tried disable firewall both from XP and AV but still. I don't know how to identify TPM device driver or whether it exist/not.
Anyone know how to resolve this ?
thanks,
-bw

I had the same problem with an X60 running XP and this adjustment to the BIOS stopped the error message:
Restart your computer.
Press F1 when the blue button prompt comes up.
Use the down arrow key to highlight Security and hit Enter.
From Security choose Security Chip.
If the Current Setting is Disabled then this is your problem.
Hit Enter and select Inactive.
Finally hit F10.
Message Edited by gorak on 06-06-2008 10:44 AM

Client Security Solutions wants to synchronise passwords with Windows

For some reason Client Security Solutions wants to synchronise passwords with Windows. I managed to get rid of this request years ago but it has returned. My problem is that I can't remember what my windows password is. How can I stop ThinkVantage from making this request each time I boot up my computer?

C'mon, Lenovo! I'm the original poster on this...your original response was that Password Manager doesn't work on Google Chrome because they don't support extensions...but they have in their latest release since at least 5 months ago!!
Disappointing.
T410 i620 4GB, Windows 7 x64

How do I launch and Reset Client Security Solution?

W510, Windows 7 Professional, 64 bit, and I like using the Password Manager feature with fingerprint security. During a recent printer installation I had to set-up a Windows Password (I never had one before). Now upon logging in, Client Security Solution continually provides error message ("Your windows password was changed recently. Please enter your Windows password to synchronize with Client Security Solution" - but it doesn't recognize anything I enter, including the current password. I can ignore the message but now I am locked out of some encrypted files.
Lenovo Document ID#HT004617 correctly addresses this problem; but I'm stuck on their Solution Step #4 (Launch Client Security Solution) - I'm supposed to launch the program, click advanced, and then select "Reset Security Settings." Problem is there are over 4 dozen executable files in the (2) qty Client Security Solution sub-directories (c:/program Files (x86)/Lenovo/Client Security Solution and c:/Program Files/Lenovo/Client Security Solution) and I have yet to find one that properly launches the CSS program. (CSS is not available from the Lenovo ThinkVantage Tools menu).
How do I start CSS?
I keep machine up to date, ThinkVantage Fingerprint software #5.9.3, PW Manager version 3.20.0335.00. Machine is under warranty but Lenovo Support thus far unable to tell me what to do!
I'm sure somebody here knows the right CSS file to run, and specific procedure to synchronize the Password, would sure appreciate some help on this, thank you!
Solved!
Go to Solution.

Been away working, now back...
It was an HP8500 Printer that started all of this. I find it difficult to believe that a (simple?) printer install could do so much collateral damage...
BACK TO MY ORIGINAL QUESTION - How do I reset CSS? Per furnished Lenovo documentation, (found on the hard drive) CSS was never installed on Windows 7 machines (for some Lenovo reason). I can export PWs to external drive but still have no idea how to launch the CSS files (of which several executable files came pre-loaded on my machine).
As far as being locked out of files, Finale composition software now says (upon trying to open files) "You don't have permission to open this file. Contact the file owner or administrator to obtain permission.."
Worst case, I can re-build my Finale composiitons, but I'm still annoyed with the Lenovo log-in screen constantly asking me to enter a password that I don't know!
I am very dissapointed with purchased LENOVO WARRANTY SUPPORT - the people I've talked to have no idea about what I'm trying to explain to them.

Client Security Solution and Office 2010's Word and Outlook

I purchased my system June 16, 2009 with Vista downgraded to XP Pro so I was not able to purchase a upgrade disk from Lenovo to upgrade to Win 7 (deadline was June 22). This week I purchased the Windows 7,retail 64 bit Home Premium upgrade package at a local store.
I did the upgrade (clean install) Windows 7 64 bit Home Premium on my ThinkPad T400 type 2764-CTO. Also successfully installed all Win 7, 64 bit ThinkVantage software with System Update 4.
I manually Installed the file z909zis1032us00.exe Client Security Solution 8.3 for Windows 7 (64-bit only) Version: 8.30.0032.00 Note: When upgrading from Windows XP To use TPM with Win 7 erase TPM in the BIOS configuration utility. In the Security and Security Chip menu, locate the option to clear the security device referred to as Security Chip and clear. If not done you can install but not use the program.
Then I had this issue with Client Security - Password Manager version 8.30.00.32.00 and Office 2010's Word & Outlook. This was before I spotted a tread with the same issue between Password Manager 3.20.0320.00 and Office 2007.
I noticed that whenever I run Word 2010 or Outlook in conjunction with Client Security SolutionI I could not select text. I could no longer use CSS because of it...
I called Lenovo and was told that they do not support retail version of Win 7. (Remember they refuse to sell me their version a week earlier). Because I dint know what to do, I deactivated the TPM in Client Security and it solve the problem in both Word & Outlook.
On the following automatic System Update at the Lenovo site the system pick up something was wrong with Client Security (it did not when the TPM was activated???) and offered to download and install "Client Security Solution Office 2007 Patch 64bit". I did and following installation I re activated the TPM. The problem in Word & Outlook was no longer there.
Then on the next system update the system offered to download and install "Patch for IE crash with Password Manager (Win7) version 1.0". I had not experience that problem but downloaded and let the system install it anyway.
So the problem is not restricted to version 8. 3.20.0320.00 and Office 2007 as reported in the other thread. Because the patch was automatically downloaded fron the web site (Client Security Solution Office 2007 Patch 64bit) I do not know if it is the same patch the was offered in that thread.
I hope this will help other people having the same problem.
Claude

Hi All,
May i know the version of the CSS? Is it Windows 7 CSS 8.3 ? 32 bit or 64 bit? Would love to know more in detailed for i could report to the development team.
Thanks!
Regards,
Cleo
WW Social Media
T61, T410, x240, Z500, Flex 14
Important Note: If you need help, post your question in the forum, and include your system type, model number and OS. Do not post your serial number.
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
Follow @LenovoForums on Twitter!
How to send a private message? --> Check out this article.
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество

T61p 6460 74M - Client Security Solution Problem

Similar Messages

Maybe you are looking for