T61p - sound issue when screen wakes up (Win7)

Hi all.
I am facing the following issue: the laptop plays audio (be it mp3, online radio etc.); Screen saver kicks in after the amount of minutes that I set (10min) > all is OK, audio continues. If I move the mouse, screen saver goes away, audio plays without problems.
The problem appears after the LCD monitor goes to sleep while audio is still playing: moving the mouse of touching a key > LCD powers on again but the audio is interrupted by 1-2 seconds of audio shutter exactly when the power is resumed to the LCD.
Is there any way to fix this?
I tried search on this forum .. I'm googling in an effort to gain some insight in this ... maybe I find a way out.
P.S. all the power management driver versions that I've tried make this happen ...
Regards,
W500 / T61p / T61 / R60

I think this is not normal lag when your system powers the monitor up again. My guess is an solid state harddrive might help, but it's pretty normal for the computer to be interrupted momentarily when something is powered on/off like your screen. If it bothers you, perhaps using a black screen saver instead of powering off the video would create less of a interruption.
ThinkPad W-510 i7-820QM(1.73-3.06GHz) Quad Core... ThinkPad T500, T9900, 8gb SSD...FrankNpad T-60p/61p (X9000 2.8ghz) 8gb SSD ips FlexView...ThinkPad T-61p (T9300 2.5ghz) 8gb ram...Thinkpad X-61 Tablet 4gb ram...ThinkPad A-31 (1.9ghz P4 1.5gb ram)

Similar Messages

  • Small "freeze" and sound issue when taking a full screenshot

    Hello,
    This is a strange one, and I've not been using Macs properly for very long, so bear with me
    It only happens when I use cmdshift3 to take a full screenshot, the other shortcuts for taking them are fine, I do get a similar issue when using Grab and it, too, only occurs on the full screen capture. What happens is, the sound clip of the camera noise will begin to play, stop, it goes a little distorted then the windows on screen will freeze up, the mouse will still move, and it stays like that for around 5 seconds until the file is saved to the desktop and all goes back to normal again. I'd like to reiterate that it only does this when i do a full screenshot, and the smaller one with the crosshairs and the individual windows is perfectly fine.
    I tried searching on google, on the main support section and the forums and nothing has come up that's been helpful. I've had a look in the system logs, and at the time's I take the screenshot, the system log reports the following:
    Sep 24 14:04:09 xxxxxxxx-computer kernel[0]: IOAudioStream[0x4db4a00]::clipIfNecessary() - Error: attempting to clip to a position more than one buffer ahead of last clip position (2,728)->(3,7bd).
    Sep 24 14:04:09 xxxxxxxx-computer kernel[0]: IOAudioStream[0x4db4a00]::clipIfNecessary() - adjusting clipped position to (3,728)
    Sep 24 14:04:32 xxxxxxxx-computer kernel[0]: IOAudioStream[0x4db4a00]::clipIfNecessary() - Error: attempting to clip to a position more than one buffer ahead of last clip position (2,71a)->(3,7ec).
    Sep 24 14:04:32 xxxxxxxx-computer kernel[0]: IOAudioStream[0x4db4a00]::clipIfNecessary() - adjusting clipped position to (3,71a)
    Sep 24 14:04:33 xxxxxxxx-computer kernel[0]: IOAudioStream[0x4db4a00]::clipIfNecessary() - Error: attempting to clip to a position more than one buffer ahead of last clip position (4,73a)->(5,7c8).
    Sep 24 14:04:33 xxxxxxxx-computer kernel[0]: IOAudioStream[0x4db4a00]::clipIfNecessary() - adjusting clipped position to (5,73a)
    I know from that it's referring to my soundcard and there's a memory reference, but that's about as much as I can figure out.
    It might not seem a big issue as the other methods are ok, but if it turns out to be something much deeper I'd like to try and fix it now before it becomes a problem.
    Does anyone have any ideas?
    Thanks,
    Claire

    Bingo! EXACT same problem here! It seems to me its a software bug.. ??

  • R5K Sound issues when installing Windows 8.1

    Hello everyone
    I installed Windows 8.1 Pro as downloaded. I used BCA > USB on my R5K to install Windows.. (Boot Camp drivers via BCA as well). Everything works fine except the sound when using Windows. There is sound, but it all... sounds disturbing, like listening to a radio. Nothing like the sound quality when using OS X, no epic sound effects and crystals clear sound whatsoever. And I think it's not even using all the speakers at the bottom of the iMac when producing the audio. I tried playing with Sound setting in Control Panned, with the audio settings in MPC, VLC, iTunes, re-installed the drivers just to be sure nothing went wrong with the installation and nothing work, I am still getting that "crappy sound quality"...
    I am welcome to any suggestions, spend half a day just trying to fix this... Thank you in advance

    Does Apple Diagnostics indicate any hardware issues?
    Using Apple Diagnostics - Apple Support
    Apple Diagnostics: Reference codes - Apple Support
    Do you get proper sound on the OSX side?

  • External display issue when Macbook wakes up

    Hi there,
    I have an external display (Samsung 920nw) used as an extension of my desktop. When I go to sleep so does my Macbook... I close the lid and the computer goes to sleep mode within seconds (the white led on the front right slowly flashes confirming that the computer got to sleep).
    The problem starts in the morning when I wake up the Macbook. The white led is still and not flashing anymore and when I lift the lid only the external display works with a poor resolution. The macbook display remains off. To solve the problem I need to detect displays and rearrange everything again between the screens.
    I am not sure but I believe that sometime during the night the Macbook wakes up and he thinks that I am using the external display as the only display.
    I want to lift the lid and both displays to be working as they were before going to sleep mode. Is anyone facing the same problem and/or have any clue of what is happening?
    I have a bluetooth mouse and a usb hub with printer, pen drive, external hard drive attached to the macbook.
    Thanks for helping.

    Could be caused by a backup drive or some other application running in the background.  There's no way to be sure without looking at your crash logs.  I keep my computer on but I always close down my apps at night to protect them from power outages.
    Nancy O.

  • I can't play any songs on iTunes. It is not a sound issue. when I highlight the  song I want it just never plays. The bar up at the top never moves. Any thoughts?

    itunes won't play any songs........i highlight song, it looks like it is ready to play but it never moves across bar at top.....it is not a sound issue. Any thoughts?

    Applications > Quicktime  general media player.  This will help us tell if it is an iTunes problem or something more general.

  • IPad sound issue when playing video from apps

    When I play a video from a link in Facebook or Twitter there is no sound but when I play the same link from YouTube it is fine.

    I have the opposite; I get sound on City TV but no sound on CBC TV nor CTV TV!

  • What is that sound effect when you wake the MBP from sleep?

    There is some sound effect every time I wake the MBP up from sleep. I am not sure what is making that sound. It sound like "pffft", I hope that makes sense.

    Hi I hve the same problem mi MacBook Pro doeas that, the sound that makes is the one I have for default, Funk (for example if my computer sleeping with the screen open and I press any key on the keybord it makes that sound) if you want you can try this, to chek if that is the sound that you heare, close all the windows and try to use expose.
    remember the sound that you are going to heare is the one that you have for default.
    Another thing is that I re-instal the OS and the computer stops from doing that but then start again when I eject my iPod from the finder window but I left it conected from the USB and then when the computer was sleeping I desconected it.
    I know that maybe nothing of this can help you but I want to let you know that you are not alone.
    If you found the fix for that thing please let me know.

  • Sound issues when playing games

    The sound works perfectly fine on my laptop when on the internet and even plaing league of legend or some steam games but for some reason i have no sound on certain games such as sims 3 when i play them? i have the volume on and i know it SHOULD be working. Why is it doing this and how do i fix it?

    Hi and welcome to the community! Since you're new please be sure that you have checked out our Discussion guidelines.
    I suggest that you try to repair the phone software using PC Companion..
    Before repairing your device you may want to backup your information first. Check out this topic for more information on how to.
    How to backup?
    If the issue should still remain I think that this needs to be examined and fixed at a repair center. For more information about how to submit your phone for repair and where, contact your local support team.
     - Official Sony Xperia Support Staff
    If you're new to our forums make sure that you have read our Discussion guidelines.
    If you want to get in touch with the local support team for your country please visit our contact page.

  • Sound Issue when connecting to TV

    I have been using the Apple AV cords to connect my video ipod to my tv with no issue for several month. Last night when I plugged my IPOD into the tv and played a movie, there was video but no sound. It was working fine two days ago. I have played with all of the settings. The video plays fine through my headphones. Has anyone experienced this? Could have my AV cable just died? Nothing has happened in the past two days....any insight?

    Hi JimSmith,
    Thanks for reply.
    TNS entry as below:
    ORCL_DB =
    (DESCRIPTION = (ADDRESS_LIST = (ADDRESS = (PROTOCOL = TCP)(HOST = 91.198.252.83)(PORT = 1521)) )
    (CONNECT_DATA = (SID = orcl) (SERVER = DEDICATED) ) )
    It works fine if I choose TNS (Network Allias: ORCL_DB).
    For the Basic setting:
    Hostname = 91.198.252.83
    Port = 1521
    SID = orcl
    The error I received when connecting to db based on Basic option is Failure -Io exception: The Network Adapter could not establish the connection.
    Below are the entries of SQLnet.ora. Any entry should I add into sqlnet.ora?
    SQLNET.AUTHENTICATION_SERVICES= (NONE)
    NAMES.DIRECTORY_PATH= (TNSNAMES, EZCONNECT)
    Appreciate your comment.
    Thanks.
    Regards,
    Jia

  • Ringtone/Vibrate issues when screen is in Lock Mode

    When my Iphone 4s is in screen lock mode I don't get the ringtone for texts or calls when it's on loud volume. When it's on vibrate it does not vibrate when the screen is locked. All these things work when the screen is unlocked. Why is that?
    Email me at [email protected] with your answers

    User troubleshooting steps as outlined in the manual include restart, reset, restore, restore as new. Have you tried any of these? Restart involves powering off your phone and powering back on. Reset involves the following procedure:
    Close all open apps by double-tapping the home button, then swiping up and off the screen with the app window (not the smaller icon).
    Reset your device: hold down the home button along with the sleep/wake button until the screen goes black and you see the Apple, then let go. (No data loss)

  • Sound Issue when burning an imovie HD projet with iDVD

    I've just finished a 45 minutes movie with a rich sound track, using the video recorded sound, mixed with music & garage band loops and effects.
    In Imovie, I've used a variable sound level adjustment to have a good sound mix. When playing with iMovie, everything is fine.
    When burning my DVD, the volume levels in the soundtrack are incorrect with big sound variations each time i've used a mix of 2 sound effect, one with a decreasing volume, the other one with increasing sound volume at the same time for example.
    Is there any known bug issue regarding this ?
    Imac G4   Mac OS X (10.3.9)  
    Imac G4   Mac OS X (10.3.9)  

    Problem found !
    Karls answer's helped me to findout the issue.
    Nevertheless, this wasn't the bug.
    When playing the movie in iMovie HD, sound rendering is not correct. When you burn your DVD, sound track is calculated to mix every sound tracks according to each sound volume curve defined in iMovie.
    If you see a dot at the beginning of a sound track this mean that the DVD sound rendering will be incorrect.
    Clean the and make sure that, when you select a sound object, you can change its volume by adjusting it, not manually, but using the general volume cursor. If not, you have a problem. Remake a perfect flat volume curve before adjusting it again.

  • L22-S1192 sound issue when plugged in

    It only happens when using amplified audio outputs headphones are ok. It makes a humming like it has feedback only happens when plugged in though un plug it and its fine i hate that i cant use my 2.1 speakers to watch movies with friends

    I am thinking its a gound loop but if it was in a car audio id know what to do

  • Has anyone else noticed since the last update to mountain lion, if you pit it to sleep, when it wakes there is no sound. you have to reboot to get sound?

    I have found, in the past few days, since the latest update to Mountain Lion, if the Mac is put to sleep, there is no sound available when it wakes. I have to re-start to get sound back. Is this general??

    Please read this whole message before doing anything.
    I've tested these instructions only with the Safari web browser. If you use another browser, they may not work as described.
    This procedure is a diagnostic test. It won’t solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
    Third-party system modifications are a common cause of usability problems. By a “system modification,” I mean software that affects the operation of other software — potentially for the worse. The following procedure will help identify which such modifications you've installed. Don’t be alarmed by the complexity of these instructions — they’re easy to carry out and won’t change anything on your Mac. 
    These steps are to be taken while booted in “normal” mode, not in safe mode. If you’re now running in safe mode, reboot as usual before continuing. 
    Below are instructions to enter some UNIX shell commands. The commands are harmless, but they must be entered exactly as given in order to work. If you have doubts about the safety of the procedure suggested here, search this site for other discussions in which it’s been followed without any report of ill effects. 
    Some of the commands will line-wrap or scroll in your browser, but each one is really just a single line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, and you can then copy it. The headings “Step 1” and so on are not part of the commands. 
    Note: If you have more than one user account, Step 2 must be taken as an administrator. Ordinarily that would be the user created automatically when you booted the system for the first time. The other steps should be taken as the user who has the problem, if different. Most personal Macs have only one user, and in that case this paragraph doesn’t apply. 
    Launch the Terminal application in any of the following ways: 
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.) 
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens. 
    ☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid. 
    When you launch Terminal, a text window will open with a line already in it, ending either in a dollar sign (“$”) or a percent sign (“%”). If you get the percent sign, enter “sh” and press return. You should then get a new line ending in a dollar sign. 
    Step 1 
    Triple-click the line of text below on this page to select it:
    kextstat -kl | awk '!/com\.apple/{printf "%s %s\n", $6, $7}' | open -ef 
    Copy the selected text to the Clipboard by pressing the key combination command-C. Then click anywhere in the Terminal window and paste (command-V). A TextEdit window will open with the output of the command. If the command produced no output, the window will be empty. Post the contents of the TextEdit window (not the Terminal window), if any — the text, please, not a screenshot. You can then close the TextEdit window. The title of the window doesn't matter, and you don't need to post that. No typing is involved in this step.
    Step 2 
    Repeat with this line:
    { sudo launchctl list | sed 1d | awk '!/0x|com\.(apple|openssh|vix\.cron)|org\.(amav|apac|cups|isc|ntp|postf|x)/{print $3}'; echo; sudo defaults read com.apple.loginwindow LoginHook; echo; sudo crontab -l; } 2> /dev/null | open -ef 
    This time you'll be prompted for your login password, which you do have to type. Nothing will be displayed when you type it. Type it carefully and then press return. You may get a one-time warning to be careful. Heed that warning, but don't post it. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator. 
    Note: If you don’t have a login password, you’ll need to set one before taking this step. If that’s not possible, skip to the next step. 
    Step 3
    { launchctl list | sed 1d | awk '!/0x|com\.apple|org\.(x|openbsd)/{print $3}'; echo; crontab -l 2> /dev/null; } | open -ef 
    Step 4
    ls -A /e*/{cr,la,mach}* {,/}Lib*/{Ad,Compon,Ex,Fram,In,Keyb,La,Mail/Bu,P*P,Priv,Qu,Scripti,Servi,Spo,Sta}* L*/Fonts .la* 2> /dev/null | open -ef  
    Important: If you formerly synchronized with a MobileMe account, your me.com email address may appear in the output of the above command. If so, anonymize it before posting. 
    Step 5
    osascript -e 'tell application "System Events" to get name of login items' | open -ef 
    Remember, steps 1-5 are all copy-and-paste — no typing, except your password. Also remember to post the output. 
    You can then quit Terminal.

  • Sound lag when playing games

    Hi,
    My Z1 compact has sound issues when playing games.
    There is a noticable sound lag of about a second (not much but is quite annoying), not only on newer games but also on the older ones, Angry Birds for example.  My recorded videos or YouTube don't appear to have the same issue.
    The problem seemed to occur after I had installed Worms 2: Armageddon when the phone got extremely hot and crashed. It was after the phone had reset and cooled down that I noticed the sound lag issue and Worms 2 was running at a very slow frame rate.
    I then installed Worms 2 on my ASUS TF201 and it runs perfectly with no sound or heating issues.
    I can't seem to find anyone else with this issue so i'm wondering if my phone is faulty.
    Any help would be much appreciated.

    Hi and welcome to the community! Since you're new please be sure that you have checked out our Discussion guidelines.
    I suggest that you try to repair the phone software using PC Companion..
    Before repairing your device you may want to backup your information first. Check out this topic for more information on how to.
    How to backup?
    If the issue should still remain I think that this needs to be examined and fixed at a repair center. For more information about how to submit your phone for repair and where, contact your local support team.
     - Official Sony Xperia Support Staff
    If you're new to our forums make sure that you have read our Discussion guidelines.
    If you want to get in touch with the local support team for your country please visit our contact page.

  • Thunderbolt Sound Issues?

    Is anyone else having problems with the Thunderbolt Display and sounds.  Mine works fine unless I am transferring a lot of data to my Thunderbolt drive through the monitor.  When I do that, it becomes totally unusable.  It almost seems like a bandwidth issue on the interface.
    I am running data to a Promise Pegasus R6 (12TB) unit.
    I have the same sound issues when I play any music or movie.  If the data isn't running it's fine.
    I am totally up to date (patchwise) on the latest 17" mbp running lion.
    Any ideas how to fix this?
    Thx

    droids use batterys..
    I don't know what issues you are having with voice though sorry

Maybe you are looking for

  • S_ALR_87012357

    In this Tcode S_ALR_87012357 whle checking the Tax details.... CoCd M Year Pstng DateDocumentNo Reference -- Tx Trs- Tax base amount- Deduct.Input Tax  gross amount        Input tax- Reference---  Non-deductible- along with these fields my client req

  • JDBC with win 98 (any problems or smoth like XP)

    Hi guys, A new client of mine has a network of 6 computers where all of them are running under winXP and his computer is running under win98 (go figure?!) Anyway, I have created a Java console application that use MS db and it works beautiful. My con

  • Speeding up creation of network servers

    Hi every one, I've seen so many requests in this form on how to handle multiple clients and socket programming in general. Most of us face this requirement in our projects and start from basic ServerSocket and Sockets every time we build servers. On

  • Transaction ENTR is unknown

    I am trying to do an RRI to jump from BW report to a transaction code, each time I try to launch it it gives me an error message saying that Transaction ENTR is unknown Anybody with a clue?

  • Retina MBP - visual glitches after returning from sleep

    On the new Retina MBP (using the highest res setting), I'm noticing that there are significant visual glitches (ghosting, persistent blocks, lack of redraw, etc...) upon returning from sleep. Is anyone else seeing this problem?