T61P Windows 7 Driver problem: Port_#0006.Hub_#0007

Am getting an error message saying driver not installed for Unknown Device. When I look at details, the location of the device is: Port_#0006.Hub_#0007. I found some great fixes to other driver problems I was having on the message boards, was wondering if anyone else had this problem and better yet had a fix!!!

A quick and painless path to take is install Lenovo System Update v4 onto your machine, run it, and install all critical updates.
In most cases, if you're missing a driver, this should supply it for you.

Similar Messages

T61p Hard drive problem- Can't open Disk D:

Hi, about three days ago, my laptop, T61p, it happened blue scrren error, and yesterday, it happened that I can't open the Disk D:, when I tried to open it, it said parameter uncorrect or asked me to format the disk.
Cause there are some useful files in the disk, I don't want to do that. And because I haven't backed up the system for several months, I don't know how to resuce the files in it.
Actually, this problem had happened last months, but when I restart the computer, the diskcheck runs automatically, and after that, the disk D: can be opened. But this time, the system just check the disk C:, and I can't run the "diskcheck" for Disk D:, when I insert this order in "cmd", it said the disk is raw, and can't proceed.
Can anyone help?
Many thanks!
Sean
T61p - 15.4" - T7500 - FX 570M 256MB - 2GB RAM - HITACHI 5400 160G - 4965AG - BT - FPR - 9 cell - Vista Ult. 32BIT

If you get a response that the disk is "raw", you can try the following: go into diskmgmt.msc (type it in run-dialog), and try setting a different drive-letter on the D-drive. See if that helps (reported "raw" disks in Vista/Windows 7 sometimes are just failure to recognize the disk properly, and a new drive-letter "activates" it again).
IT-technician, running my own company in Bergen, Norway
Thinkpad T61, 8895CTO C2D 2Ghz/4GB/120GB SSD/1400x1050

Windows Driver problems

Hello
After yesterday the failure with the mini, that only boots from xp i've got another problem after reinstalling all
after installing XP i want to install the Apple drivers for XP but the installer hangs on "Apple build in bluetooth" and the other problem is that i haven't any Ethernet adapter or wireless the xp driver installer wants to reboot but when i do that the other device won't work because the drivers aren't installed
The following devices won't install or won't install properly
USB-hid (one time) the other two are installed
Unknown Device
Ethernet controller
PCI-device
PCI-device
After the wanted reboot from the installer i've got
2 devices with a ! the bluetooth device and USB-Hid
and i've got a list of 13 unknown devices and one PCI-device
I'm using a xp Corp. Version with SP2 could that be the problem
i've googled around but i can't find a solution
MAC-mini 1.5 single Mac OS X (10.4.6) P IV D 830 (s775), PIV 3.2 HT (s478), PIV 2.6 HT(s478), AMD Athlon XP 2400 (sA)

I think you should update your Windows ME to Windows XP, PC Suite works very well there. I heard that even Microsoft isn't supporting Windows ME anymore, too many bugs there

Cannot load or find Driver, Port_#0005.Hub_#0004

Hi all,
I just installed a new sdd and I'm reinstalling all my drivers but I can't seem to find one driver. It says it is in, Port_#0005.Hub_#0004. My computer is a T510 (4313). I've tried windows update and the lenovo drivers update as well and neither one works for me.
Thanks for the help.

Hiyomika wrote:
Hi all,
I just installed a new sdd and I'm reinstalling all my drivers but I can't seem to find one driver. It says it is in, Port_#0005.Hub_#0004. My computer is a T510 (4313). I've tried windows update and the lenovo drivers update as well and neither one works for me.
Thanks for the help.
What I would try (in this order) is a Bios update, Chipset Driver Update and then uninstall all of the USB hubs appearing in Device Manager, reboot. Run the Thinkvantage System Update last to do a cleanup. That SHOULD catch it

T61P: Windows Vista SP1 X64: DVD player driver wont work

My 64-bit Vista SP1 T61P has stopped recognizing my DVD drive and I cannot fix the driver by either using WindowsUpdate or by using the ThinkPad SystemUpdate. I could not even find a separate driver for the DVD drive at the lenovo site.
Any suggestions, anyone?
The error that I see in Device manager is:
MAT**bleep**A DVD-RAM UJ-852 ATA Device
Windows cannot load the device driver for this hardware. The driver may be corrupted or missing. (Code 39)
Click 'Check for solutions' to send data about this device to Microsoft and to see if there is a solution available.
Thanks

I had exactly the same problem...I thought it was an x64 driver problem until I tried this:
http://support.microsoft.com/kb/929461
...worked like a charm...let me know if that did the trick...brian

Windows 7 - HP Laserjet 8500 print driver problem

I have tried everything imaginable to correct this HP 8500n print driver problem with no success, please help!
I cannot correct or get rid of a reoccurring “Incompatible Print Settings” error dialog box message that repeatedly states that “There are one or more conflicting settings. One of the settings is: Output Bin: Mailbox 1, Accessory Output Bin: Not Installed”. The radio button options are “Restore my previous settings or Keep this setting, and I will change it later”. This same dialog message repeats 13 times for all the other various conflicts each time you click on printer properties to change to 2 sided printing or any other printer settings. This printer does not have any of these features attached or set into it.
I am a volunteer that manages a number of computers on our small church LAN, 2 computers operating on MS XP-SP3, 2 on MS Windows 7 Home Premium and my 2 problem computers that came pre-installed with Vista Home Premium of which I have performed an HP OEM upgrade to Window 7.
I have isolated this print driver problem to the Vista operating system and even when computers are upgraded to Windows 7 does not correct this driver error. I have also tried every possible print driver variant of the HP 8500, HP8550, PCL, PS to include the Microsoft versus HP versions with no success. In each case I get this error yet neither of the XP computers or the computers that had Windows 7 as a original operating system have no problems with their print drivers for this printer.
Yes, I have repeatedly searched and upgraded the operating system and print drivers. In desperation I have even tried to find the correctly behaving Windows 7 print driver and transfer it to these Vista upgraded to Windows 7 machines. However I could not isolate the driver location.
The only thing I can conclude is that this errant HP print driver was resident within Vista and remains resident even after a HP OEM Windows 7 upgrade. Additionally, all of these computers are configured to access this printer via its static IP address on the network. The XP computers are 32 bit, all of the Vista upgraded to Win 7 and OEM Win 7 computers are 64 bit machines all with respective OS.
Can anyone please help me correct this problem?

Hi,
Unfortunately I can't see your uploaded image yet as it is awaiting approval from HP.
From what I can see you are correct that HP does supply drivers for this printer and that the drivers for your printer are already included with Windows 7. On the machines affected, try the procedure below to see if it helps at all
Next download revo uninstaller on the link below and install it.
http://www.revouninstaller.com/download-freeware-version.php
Disconnect the printer from the PC.
Run Revo and see if it finds any HP Printer Software installed. If it does, right click the software icon and select uninstall. During the process you may be asked to delete registry entries. If you are, just select all and click delete. Do the same for any left over files and folders. Once completed, reboot the PC.
Re-connect your printer to the PC and follow the guide below.
http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?&objectID=c02536257
If this helps you will need to repeat the process on each of the affected machines.
Best wishes,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Video Or Graphic Card Driver Problem After Clean And Re-Install Windows 7 32-bit

Video Or Graphic Card Driver Problem After Clean And Re-Install Windows 7 32-bit I m Tired I m Finding & Finding Drivers
But I Wont be Able To Play Games & Other Apps Please Solve This And Give Me Link For Video Card Driver Or
Graphic Card Driver For Windows 7 32-bit (x86)
THANKS
PROFESSOR TOM........................................

Hi:
See if this W7 32 bit graphics driver works...
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-100029-2&cc=us&dlc=en&lc=en...

Premiere Pro 2.0 and Windows 7 - Direct Sound Input soundcard driver problem

My XP machine crashed, I reinstalled Premiere Pro 2.0 with Windows 7, and I got the following error: 'The Currently installed soundcard driver does not support Direct Sound Input. Recording audio is not possible.' The soundcard drivers are updated. Any ideas? Here's what I have: AMD Phenom II X4 965 Processor 3.40 GHz 8 GB, 64 bit. Thank you for looking.

Thanks! Though I upgraded to solve the problem, this is good to know.
Bob
Date: Wed, 9 Nov 2011 04:45:42 -0700
From: [email protected]
To: [email protected]
Subject: Premiere Pro 2.0 and Windows 7 - Direct Sound Input soundcard driver problem
Re: Premiere Pro 2.0 and Windows 7 - Direct Sound Input soundcard driver problem created by Steve-Italy in Premiere Pro CS4 & Earlier - View the full discussion
VERY VERY VERY EASY (now, when I solved the problem, not before...!!!)
Insert Micropone or any jack in Micropone Input or Aux Input, on your sound card or motherboard !
AND NOW YOU CAN USE PREMIERE PRO 2.0
Enjoy
Steve - Italy
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4015730#4015730
To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4015730#4015730. In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Premiere Pro CS4 & Earlier by email or at Adobe Forums
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

Running Windows 7 on a 2010 HP desktop and Microsoft 6 to 4 has a driver problem (x) Microsoft ISATAP Adapter 2 has a driver problems (x)

Microsoft Teredo Tunneling Adapter has a driver problem (x) What does this mean? How do I fix it?

Hi,
Before everything, please create a restore point first.
Please refer to this link:
MICROSOFT TEREDO TUNNELING ADAPTER
http://social.technet.microsoft.com/Forums/windows/en-US/9c1d4c54-4dca-4a42-932d-bfe6ced1c6bf/microsoft-teredo-tunneling-adapter?forum=w7itproinstall
You may need uninstall the problematic driver first.
Alex Zhao
TechNet Community Support

Mapped windows drive - Java performance problem

I have a mapped windows drive to which I am writing files sized from few kbs to GBs, Now I am facing performance problem.
Time for writing to local drive file with 4 MB - 1.6 seconds.
Time for writing to mapped drive : 31 seconds.
Please give me the ways to improve the mapped drive file access.
Note I am using buffered streams and all , I am primarly expecting some thing from windows side.
Renjith.

I am copying the file from local drive to a mapped drive.
ovxFileName = filename.substring(attachmentsFolder.length() + 1);
               BufferedInputStream reader = new BufferedInputStream(
                         new FileInputStream(filename));
               BufferedOutputStream writer = new BufferedOutputStream(
                         new FileOutputStream(commonLocationForOVX + File.separator
                                   + ovxFileName));
               String str = "";
               TimerUtility timer = new TimerUtility();
               timer.startTimer();
               int val = 0;
               while ((val = reader.read()) != -1) {
                    writer.write(val);
               writer.close();
               reader.close();
               timer.stopTimer();

Latest Windows 7 on latest Mac OS X via Boot Camp = display driver problems

I've just done (with difficulty) a Windows 7 installation via Boot Camp on my hot new Mac Quad. But when I use Photoshop Elements for Windows-- the problem may occur with other Windows applications too but I haven't tried them yet-- I'm getting frequent blackouts and recoveries accompanied by the now slightly infuriating error message, "DISPLAY DRIVER STOPPED RESPONDING AND HAS RECOVERED. Display driver Radeon ATI family stopped responding and has successfully recovered."
I'm also getting frequent spotty screens which suggest compatability problems. What gives? Are other people troubled by this? Seems to me that this is a problem crying out for an Apple software fix. But other people may have an answer now.

Did you uppdate to bootcamp 3.1? To update to 3.1 you need to have installed 3.0 from your Snow Leopard install disc. What version of the display driver are you using.
See this thread that just started too.
http://discussions.apple.com/thread.jspa?threadID=2345677
3.1 solved the "display stopped responding" for me. Of course that introduced other issues.
Check your driver version and read here for other display issues fun...
http://discussions.apple.com/thread.jspa?threadID=2328909
http://discussions.apple.com/thread.jspa?threadID=2307311
http://discussions.apple.com/thread.jspa?threadID=2315531

Windows 7 Combo Jack Realtek driver problem s510p

I'm running Windows 7 on an Ideapad s510p, but the realtek drivers (downloaded from the s510p downloads page) sees one audio input, but thinks it is a headphone out only:
There were a couple of topics with kind of similar problems like this where people got recommended to use an adapter for both. I ordered one but that does not solve the problem, it seems to me that it is a driver problem. I tried the drivers from the s510p downloads page and also from the realtek drivers but both give the same problem, is there any way to fix this?

Okay, I solved the problem. Turns out I was installing the wrong driver from the Realtek website.
The correct driver for VB in my installation is for the AC'97 audio controller.
It is located at:
http://www.realtek.com.tw/downloads/downloadsCheck.aspx?Langid=1&PNid=23&PFid=23 &Level=4&Conn=3&DownTypeID=3&GetDown=false#AC
I have sound now!
For more information, you can view my postings at the VB forum:
http://forums.virtualbox.org/viewtopic.php?f=8&t=23224

Fix Ethernet driver problems in virtualized Windows 7 & Tools

Adding Window 7 or upgrading from Vista to your Mac using Vistual Window 7 http://reviews.cnet.com/8301-31012_7-10382487-10355804.html?tag=mncol;title solution to how to Fix Ethernet driver problems in virtualized Windows 7 when http://communities.vmware.com/home.jspa wont work....
Microsof Window 7 System Repair Disk runnig on you Mac OS X...
http://cnettv.cnet.com/make-windows-7-system-repair-disc/9742-1_53-50078509.html
Windows 7 Secret Tool: One-Click Screen Capture runnig on you Mac OS X...
http://www.youtube.com/watch?v=z2s3VS3SN5o
Message was edited by: JamesUFOs
Message was edited by: JamesUFOs
Message was edited by: JamesUFOs

None

MOVED: Driver problems with Windows Professional XP 64bit Edition

This topic has been moved to Operating Systems.
Driver problems with Windows Professional XP 64bit Edition

Well, after looking around the forum here I found an answer that works! I wish I could remember who to give credit too though. I installed the latest Vista drivers and I got static all the time. I tried another members suggestion of disabling the X-Fi device in the Device manager every time I log off and then enable the X-Fi the next time I log in. I have great sound as long as I do that. Also, for connecting to a home system I am using the DTS-60, $00 on this website, but it works well if you havea DTS decoder. I am using the X-Fi extreme Music edition. Good Luck, hopefully another driver is on the way.

Win7 error Port_#0003.Hub_#0001

After installing win 7 I am down to only one error. The machine I am working on is:
Pavilion dv5-1200oe S/N {Removed for privacy}
I am recieving an error under USB Controllers :
Unknown device
Placed: Port_#0003.Hub_#0001
Driverversion - 6.1.7600.16385
Other computers seems to have that error related to the fingerprintdriver, but this model has no fingerprint unit. Can anybody tell me wich driver I am missing?

Hi,
The hardware id is for the Validity Sensor driver on the following link.
Validity Sensor Driver - Windows 8.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

T61P Windows 7 Driver problem: Port_#0006.Hub_#0007

Similar Messages

Maybe you are looking for