T7700 help with setting up with tv and game consoles

HI i wanted to set up my T7700 suround sound with my tv and two game consoles i know that i can connect it to one console and use an adapter to get actual sound sound. What I wanted to is if i could connect it to mulitiple consoles and the tv at once so i dont have to muck around changing it from port to port?. I know that this is a computer system but i was just wanding whether it is posible or not?.
thanks in advance

element,
As what skynet suggest, you could get the Creative DDTS-100 decoder. From what you described, the decoder will be the best option around. You can check them out at
http://us.creative.com/products/prod...6&product=9468
Jason

Similar Messages

Help with writing and retrieving data from a table field with type "LCHR"

Hi Experts,
I need help with writing and reading data from a database table field which has a type of "LCHR". I have given an example of the original code but don't know what to change it to in order to fix it and still read in the original data that's stored in the LCHR field.
Basically we have two Function modules, one that saves list data to a database table and one that reads in this data. Both Function modules have an identicle table which has an array of fields from type INT4, CHAR, and type P. The INT4 field is the first one.
Incidentally this worked in the 4.7 non-unicode system but is now dumping in the new ECC6 Unicode system.
Thanks in advance,
C
SAVING THE LIST DATA TO DB
DATA: L_WA(800).
LOOP AT T_TAB into L_WA.
ZDBTAB-DATALEN = STRLEN( L_WA ).
MOVE: L_WA to ZDBTAB-RAWDATA.
ZDBTAB-LINENUM = SY-TABIX.
INSERT ZDBTAB.
READING THE DATA FROM DB
DATA: BEGIN OF T_DATA,
             SEQNR type ZDBTAB-LINENUM,
             DATA type ZDBTAB-RAWDATA,
           END OF T_TAB.
Select the data.
SELECT linenum rawdata from ZDBTAB into table T_DATA
     WHERE repid = w_repname
     AND rundate = w_rundate
     ORDER BY linenum.
Populate calling Internal Table.
LOOP AT T-DATA.
APPEND T_DATA to T_TAB.
ENDLOOP.

Hi Anuj,
The unicode flag is active.
When I run our report and then to try and save the list data a dump is happening at the following point
LOOP AT T_TAB into L_WA.
As I say, T_TAB consists of different fields and field types whereas L_WA is CHAR 800. The dump mentions UC_OBJECTS_NOT_CONVERTIBLE
When I try to load a saved list the dump is happening at the following point
APPEND T_DATA-RAWDATA to T_TAB.
T_DATA-RAWDATA is type LCHR and T_TAB consists of different fields and field types.
In both examples the dumps mention UC_OBJECTS_NOT_CONVERTIBLE
Regards
C

Help with count and sum query

Hi I am using oracle 10g. Trying to aggregate duplicate count records. I have so far:
SELECT 'ST' LEDGER,
CASE
WHEN c.Category = 'E' THEN 'Headcount Exempt'
ELSE 'Headcount Non-Exempt'
END
ACCOUNTS,
CASE WHEN a.COMPANY = 'ZEE' THEN 'OH' ELSE 'NA' END MARKET,
'MARCH_12' AS PERIOD,
COUNT (a.empl_id) head_count
FROM essbase.employee_pubinfo a
LEFT OUTER JOIN MMS_DIST_COPY b
ON a.cost_ctr = TRIM (b.bu)
INNER JOIN MMS_GL_PAY_GROUPS c
ON a.pay_group = c.group_code
WHERE a.employee_status IN ('A', 'L', 'P', 'S')
AND FISCAL_YEAR = '2012'
AND FISCAL_MONTH = 'MARCH'
GROUP BY a.company,
b.district,
a.cost_ctr,
c.category,
a.fiscal_month,
a.fiscal_year;
which gives me same rows with different head_counts. I am trying to combine the same rows as a total (one record). Do I use a subquery?

Hi,
Whenever you have a problem, please post a little sample data (CREATE TABLE and INSERT statements, relevant columns only) from all tables involved.
Also post the results you want from that data, and an explanation of how you get those results from that data, with specific examples.
user610131 wrote:
... which gives me same rows with different head_counts.If they have different head_counts, then the rows are not the same.
I am trying to combine the same rows as a total (one record). Do I use a subquery?Maybe. It's more likely that you need a different GROUP BY clause, since the GROUP BY clause determines how many rows of output there will be. I'll be able to say more after you post the sample data, results, and explanation.
You may want both a sub-query and a different GROUP BY clause. For example:
WITH    got_group_by_columns     AS
     SELECT a.empl_id
     ,     CASE
                    WHEN c.category = 'E'
              THEN 'Headcount Exempt'
                    ELSE 'Headcount Non-Exempt'
            END          AS accounts
     ,      CASE
                    WHEN a.company = 'ZEE'
                    THEN 'OH'
                    ELSE 'NA'
            END          AS market
     FROM              essbase.employee_pubinfo a
     LEFT OUTER JOIN mms_dist_copy             b ON   a.cost_ctr     = TRIM (b.bu)
     INNER JOIN       mms_gl_pay_groups        c ON   a.pay_group      = c.group_code
     WHERE     a.employee_status     IN ('A', 'L', 'P', 'S')
     AND        fiscal_year           = '2012'
     AND        fiscal_month          = 'MARCH'
SELECT    'ST'               AS ledger
,       accounts
,       market
,       'MARCH_12'          AS period
,       COUNT (empl_id)      AS head_count
FROM       got_group_by_columns
GROUP BY accounts
,            market
;But that's just a wild guess.
You said you wanted "Help with count and sum". I see the COUNT, but what do you want with SUM? No doubt this will be clearer after you post the sample data and results.
Edited by: Frank Kulash on Apr 4, 2012 5:31 PM

MOVED: [Athlon64] Need Help with X64 and Promise 20378

This topic has been moved to Operating Systems.
[Athlon64] Need Help with X64 and Promise 20378

I'm moving this the the Administration Forum. It seems more apporpiate there.

Help with AExp and airtunes - setting up network

So I've had one of the original airport expresses for a few years, and in my previous house I used it in WDS remote mode, using the ethernet jack as an internet connection for a..ahem...well known gaming console, and the audio jack for airtunes.
In my new home, I have a more complicated setup that I like better, but I have a problem understanding the steps I need to take to get the airtunes speakers to show up in itunes.
Here is my setup:
the main router is a flying saucer airport extreme (creating a b/g wireless network) -- ethernet out of this into a wired hub, from which run ethernet cables to jacks in the rooms of my house. my iMac is connected to the wall in my office via ethernet. In the living room there is a new model airport extreme, in client mode, creating an 'n only' network. My living room devices are plugged into this airport extreme. (apple tv, tivo,and "gaming console")
I am hooking up some outdoor speakers, and was going to use my old airport express as the way to get music to them. I once again have it set up in WDS remote mode. Everything so far seems to be working, however I can only see the airport express as a speaker option on my iMac iTunes if the airport card is turned on and connected to my b/g network (originating from the airport in the attic) which it isn't usually. I keep it turned off so the imac will use the ethernet hard connection to get media to the apple tv.
I guess I sort of understand that it needs to be connected to the wireless network of which the airport express is a part. And I guess it's not a big deal...if I'm going to be outside, I will have to turn on the receiver, turn on the imac wireless card, and select the express in the iTunes speaker menu. Three steps instead of two...no big deal.
But it seems logical to me, that if everything is connected to each other in some way, it shouldn't matter if the computer streaming music to a wireless device is connected to the network wired or wirelessly.
I guess I could also just leave the wireless card turned on, but if I do, does iMac know to use the fastest possible connection to stream data across the network? i.e. hard wired. (the express is on the b/g network that I keep to allow older devices to get on the network)
If you are still reading at this point, I am impressed. You truly have the heart of a teacher. Please let me know if anyone can explain this to me. Thanks so much.
iHoo

P.S. -- I just now noticed that under system preferences/network you can 'set service order' which seems to be in what order iMac goes through your network connections. I had never noticed that.
I guess this means that it will default to ethernet (if I put that at the top) for a network connection, but still have the airport express available to it.
So if I am understanding this correctly, it appears the solution is to keep airport turned on and connected to the b/g network.

Need help with JTextArea and Scrolling

import java.awt.*;
import java.awt.event.*;
import java.text.DecimalFormat;
import javax.swing.*;
public class MORT_RETRY extends JFrame implements ActionListener
private JPanel keypad;
private JPanel buttons;
private JTextField lcdLoanAmt;
private JTextField lcdInterestRate;
private JTextField lcdTerm;
private JTextField lcdMonthlyPmt;
private JTextArea displayArea;
private JButton CalculateBtn;
private JButton ClrBtn;
private JButton CloseBtn;
private JButton Amortize;
private JScrollPane scroll;
private DecimalFormat calcPattern = new DecimalFormat("$###,###.00");
private String[] rateTerm = {"", "7years @ 5.35%", "15years @ 5.5%", "30years @ 5.75%"};
private JComboBox rateTermList;
double interest[] = {5.35, 5.5, 5.75};
int term[] = {7, 15, 30};
double balance, interestAmt, monthlyInterest, monthlyPayment, monPmtInt, monPmtPrin;
int termInMonths, month, termLoop, monthLoop;
public MORT_RETRY()
Container pane = getContentPane();
lcdLoanAmt = new JTextField();
lcdMonthlyPmt = new JTextField();
displayArea = new JTextArea();//DEFINE COMBOBOX AND SCROLL
rateTermList = new JComboBox(rateTerm);
scroll = new JScrollPane(displayArea);
scroll.setSize(600,170);
scroll.setLocation(150,270);//DEFINE BUTTONS
CalculateBtn = new JButton("Calculate");
ClrBtn = new JButton("Clear Fields");
CloseBtn = new JButton("Close");
Amortize = new JButton("Amortize");//DEFINE PANEL(S)
keypad = new JPanel();
buttons = new JPanel();//DEFINE KEYPAD PANEL LAYOUT
keypad.setLayout(new GridLayout( 4, 2, 5, 5));//SET CONTROLS ON KEYPAD PANEL
keypad.add(new JLabel("Loan Amount$ : "));
keypad.add(lcdLoanAmt);
keypad.add(new JLabel("Term of loan and Interest Rate: "));
keypad.add(rateTermList);
keypad.add(new JLabel("Monthly Payment : "));
keypad.add(lcdMonthlyPmt);
lcdMonthlyPmt.setEditable(false);
keypad.add(new JLabel("Amortize Table:"));
keypad.add(displayArea);
displayArea.setEditable(false);//DEFINE BUTTONS PANEL LAYOUT
buttons.setLayout(new GridLayout( 1, 3, 5, 5));//SET CONTROLS ON BUTTONS PANEL
buttons.add(CalculateBtn);
buttons.add(Amortize);
buttons.add(ClrBtn);
buttons.add(CloseBtn);//ADD ACTION LISTENER
CalculateBtn.addActionListener(this);
ClrBtn.addActionListener(this);
CloseBtn.addActionListener(this);
Amortize.addActionListener(this);
rateTermList.addActionListener(this);//ADD PANELS
pane.add(keypad, BorderLayout.NORTH);
pane.add(buttons, BorderLayout.SOUTH);
pane.add(scroll, BorderLayout.CENTER);
addWindowListener( new WindowAdapter()
public void windowClosing(WindowEvent e)
System.exit(0);
public void actionPerformed(ActionEvent e)
String arg = lcdLoanAmt.getText();
int combined = Integer.parseInt(arg);
if (e.getSource() == CalculateBtn)
try
JOptionPane.showMessageDialog(null, "Got try here", "Error", JOptionPane.ERROR_MESSAGE);
catch(NumberFormatException ev)
JOptionPane.showMessageDialog(null, "Got here", "Error", JOptionPane.ERROR_MESSAGE);
if ((e.getSource() == CalculateBtn) && (arg != null))
try{
if ((e.getSource() == CalculateBtn) && (rateTermList.getSelectedIndex() == 1))
monthlyInterest = interest[0] / (12 * 100);
termInMonths = term[0] * 12;
monthlyPayment = combined * (monthlyInterest / (1 - (Math.pow (1 + monthlyInterest, -termInMonths))));
lcdMonthlyPmt.setText(calcPattern.format(monthlyPayment));
if ((e.getSource() == CalculateBtn) && (rateTermList.getSelectedIndex() == 2))
monthlyInterest = interest[1] / (12 * 100);
termInMonths = term[1] * 12;
monthlyPayment = combined * (monthlyInterest / (1 - (Math.pow (1 + monthlyInterest, -termInMonths))));
lcdMonthlyPmt.setText(calcPattern.format(monthlyPayment));
if ((e.getSource() == CalculateBtn) && (rateTermList.getSelectedIndex() == 3))
monthlyInterest = interest[2] / (12 * 100);
termInMonths = term[2] * 12;
monthlyPayment = combined * (monthlyInterest / (1 - (Math.pow (1 + monthlyInterest, -termInMonths))));
lcdMonthlyPmt.setText(calcPattern.format(monthlyPayment));
catch(NumberFormatException ev)
JOptionPane.showMessageDialog(null, "Invalid Entry!\nPlease Try Again", "Error", JOptionPane.ERROR_MESSAGE);
} //IF STATEMENTS FOR AMORTIZATION
if ((e.getSource() == Amortize) && (rateTermList.getSelectedIndex() == 1))
loopy(7, 5.35);
if ((e.getSource() == Amortize) && (rateTermList.getSelectedIndex() == 2))
loopy(15, 5.5);
if ((e.getSource() == Amortize) && (rateTermList.getSelectedIndex() == 3))
loopy(30, 5.75);
if (e.getSource() == ClrBtn)
rateTermList.setSelectedIndex(0);
lcdLoanAmt.setText(null);
lcdMonthlyPmt.setText(null);
displayArea.setText(null);
if (e.getSource() == CloseBtn)
System.exit(0);
private void loopy(int lTerm,double lInterest)
double total, monthly, monthlyrate, monthint, monthprin, balance, lastint, paid;
int amount, months, termloop, monthloop;
String lcd2 = lcdLoanAmt.getText();
amount = Integer.parseInt(lcd2);
termloop = 1;
paid = 0.00;
monthlyrate = lInterest / (12 * 100);
months = lTerm * 12;
monthly = amount *(monthlyrate/(1-Math.pow(1+monthlyrate,-months)));
total = months * monthly;
balance = amount;
while (termloop <= lTerm)
displayArea.setCaretPosition(0);
displayArea.append("\n");
displayArea.append("Year " + termloop + " of " + lTerm + ": payments\n");
displayArea.append("\n");
displayArea.append("Month\tMonthly\tPrinciple\tInterest\tBalance\n");
monthloop = 1;
while (monthloop <= 12)
monthint = balance * monthlyrate;
monthprin = monthly - monthint;
balance -= monthprin;
paid += monthly;
displayArea.setCaretPosition(0);
displayArea.append(monthloop + "\t" + calcPattern.format(monthly) + "\t" + calcPattern.format(monthprin) + "\t");
displayArea.append(calcPattern.format(monthint) + "\t" + calcPattern.format(balance) + "\n");
monthloop ++;
termloop ++;
public static void main(String args[])
MORT_RETRY f = new MORT_RETRY();
f.setTitle("MORTGAGE PAYMENT CALCULATOR");
f.setBounds(600, 600, 500, 500);
f.setLocationRelativeTo(null);
f.setVisible(true);
}need help with displaying the textarea correctly and the scroll bar please.
Message was edited by:
new2this2020

What's the problem you're having ???
PS.

Help with encapsulation and a specific case of design

Hello all. I have been playing with Java (my first real language and first OOP language) for a couple months now. Right now I am trying to write my first real application, but I want to design it right and I am smashing my head against the wall with my data structure, specifically with encapsulation.
I go into detail about my app below, but it gets long so for those who don't want to read that far, let me just put these two questions up front:
1) How do principles of encapsulation change when members are complex objects rather than primitives? If the member objects themselves have only primitive members and show good encapsulation, does it make sense to pass a reference to them? Or does good encapsulation demand that I deep-clone all the way to the bottom of my data structure and pass only cloned objects through my top level accessors? Does the analysis change when the structure gets three or four levels deep? Don't DOM structures built of walkable nodes violate basic principles of encapsulation?
2) "Encapsulation" is sometimes used to mean no public members, othertimes to mean no public members AND no setter methods. The reasons for the first are obvious, but why go to the extreme of the latter? More importantly HOW do you go to the extreme of the latter? Would an "updatePrices" method that updates encapsulated member prices based on calculations, taking a single argument of say the time of year be considered a "setter" method that violates the stricter vision of encapsulation?
Even help with just those two questions would be great. For the masochistic, on to my app... The present code is at
http://www.immortalcoil.org/drake/Code.zip
The most basic form of the application is statistics driven flash card software for Japanese Kanji (Chinese characters). For those who do not know, these are ideographic characters that represent concepts rather than sounds. There are a few thousand. In abstract terms, my data structure needs to represent the following.
- There are a bunch of kanji.
   Each kanji is defined by:
   - a single character (the kanji itself); and
   - multiple readings which fall into two categories of "on" and "kun".
      Each reading is defined by:
      - A string of hiragana or katakana (Japanese phoenetic characters); and
      - Statistics that I keep to represent knowledge of that reading/kanji pair.Ideally the structure should be extensible. Later I might want to add statistics associated with the character itself rather than individual readings, for example. Right now I am thinking of building a data structure like so:
- A Vector that holds:
   - custom KanjiEntry objects that each hold
      - a kanji in a primitive char value; and
      - two (on, kun) arrays or Vectors of custom Reading objects that hold
         - the reading in a String; and
         - statistics of some sort, probably in primitive valuesFirst of all, is this approach sensible in the rough outlines?
Now, I need to be able to do the obvious things... save to and load from file, generate tables and views, and edit values. The quesiton of editting values raises the questions I identified above as (1) and (2). Say I want to pull up a reading, quiz the user on it, and update its statistics based on whether the user got it right or wrong. I could do all this through the KanjiEntry object with a setter method that takes a zillion arguments like:
theKanjiEntry.setStatistic(
"on",   // which set of readings
2,      // which element in that array or Vector
"score", // which statistic
98);      // the valueOr I could pass a clone of the Reading object out, work with that, then tell the KanjiEntry to replace the original with my modified clone.
My instincts balk at the first approach, and a little at the second. Doesn't it make more sense to work with a reference to the Reading object? Or is that bad encapsulation?
A second point. When running flash cards, I do not care about the subtlties of the structure, like whether a reading is an on or a kun (although this is important when browsing a table representing the entire structure). All I really care about is kanij/reading pairings. And I should be able to quickly poll the Reading objects to see which ones need quizzing the most, based on their statistics. I was thinking of making a nice neat Hashtable with the keys being the kanji characters in Strings (not the KanjiEntry objects) and the values being the Reading objects. The result would be two indeces to the Reading objects... the basic structure and my ad hoc hashtable for runninq quizzes. Then I would just make sure that they stay in sync in terms of the higher level structure (like if a whole new KanjiEntry got added). Is this bad form, or even downright dangerous?
Apart from good form, the other consideration bouncing around in my head is that if I get all crazy with deep cloning and filling the bottom level guys with instance methods then this puppy is going to get bloated or lag when there are several thousand kanji in memory at once.
Any help would be appreciated.
Drake

Usually by better design. Move methods that use the
getters inside the class that actually has the data....
As a basic rule of thumb:
The one who has the data is the one using it. If
another class needs that data, wonder what for and
consider moving that operation away from that class.
Or move from pull to push: instead of A getting
something from B, have B give it to A as a method
call argument.Thanks for the response. I think I see what you are saying.. in my case it is something like this.
Solution 1 (disfavored):
public class kanjiDrill{ // a chunk of Swing GUI or something
     public void runDrill(Vector kanjiEntries){
          KanjiEntry currentKanjiEntry = kanjiEntries.elementAt(0); // except really I will pick one randomly
          char theKanji = currentKanjiEntry.getKanji();
          String theReading = currentKanjiEntry.getReading();
          // build and show a flashcard based on theKanji and theReading
          // use a setter to change currentKanji's data based on whether the user answers correctly;
}Solution 2 (favored):
public class kanjiDrill{ // a chunk of Swing GUI or something
     public void runDrill(Vector kanjiEntries){
          KanjiEntry currentKanjiEntry = kanjiEntries.elementAt(0); // except really I will pick one randomly
          currentKanji.buildAndShowFlashcard(); // method includes updating stats
}I can definitely see the advantages to this, but two potential reasons to think hard about it occur to me right away. First, if this process is carried out to a sufficient extreme the objects that hold my data end up sucking in all the functionality of my program and my objects stop resembling natural concepts.
In your shopping example, say you want to generate price tags for the items. The price tags can be generated with ONLY the raw price, because we do not want the VAT on them. They are simple GIF graphics that have the price printed on a an irregular polygon. Should all that graphics generating code really go into the item objects, or should we just get the price out of the object with a simple getter method and then make the tags?
My second concern is that the more instance methods I put into my bottom level data objects the bigger they get, and I intend to have thousands of these things in memory. Is there a balance to strike at some point?
It's not really a setter. Outsiders are not setting
the items price - it's rather updating its own price
given an argument. This is exactly how it should be,
see my above point. A breach of encapsulation would
be: another object gets the item price, re-calculates
it using a date it knows, and sets the price again.
You can see yourself that pushing the date into the
item's method is much beter than breaching
encapsulation and getting and setting the price.So the point is not "don't allow access to the members" (which after all you are still doing, albeit less directly) so much as "make sure that any functionality implicated in working with the members is handled within the object," right? Take your shopping example. Say we live in a country where there is no VAT and the app will never be used internationally. Then we would resort to a simple setter/getter scheme, right? Or is the answer that if the object really is pure data are almost so, then it should be turned into a standard java.util collection instead of a custom class?
Thanks for the help.
Drake

Can anyone help with iPlayer and Sky Mobile?

Ok, I'm so close to giving up with this useless phone. There are 3 apps on my N97 which give me a constant headache.
BBC iPlayer
Sky Mobile*
YouTube
*I should point out that I only use Sky Mobile to set recordings on my Sky+. I do not use it for, nor have any desire to use it for actually watching Mobile TV.
All of these apps work absolutely fine over my home WiFi network. It's when I try to use them over 3G (my Vodafone Live! connection) that I start running in to trouble.
All 3 give me connection problems, errors, and simply refuse to load half the time when on 3G. I got so annoyed I just did a hard reset the other week, and magically all three started working again. However, now 2 of them are failing me again. YouTube (touch wood) is working fine at the moment, but iPlayer and Sky Mobile just aren't.
iPlayer sometimes works. But sometimes I get script errors (unable to load content), and sometimes it says something about checking my connection settings. I wouldn't mind but it's not actually possible to access any options for the iPlayer. Even in application settings there are no options you're able to set.
Sky Mobile simply flat out refuses to work ever on 3G. But it did after I did a hard reset for a couple of weeks, now it just stopped working! It wont even load. It just gives the error message 'Unable to connect to network - please check connection settings" or something along those lines.
I've tried so many different things. Tried setting my internet connections to 'always ask', tried setting it to default to Vodafone Live! all the time, tried setting my video streaming settings to WAP, all sorts. Every combination I can think of.
I just can't wait to get rid of this phone. I've put so many people off buying one. They see it and think it's all swish and cool, and I just say 'Don't. You'll regret it'. I can't wait for my contract to be up so I can upgrade to an iPhone now Vodafone have got them.
Can anyone help with these problems? Thanks in advance, but I don't hold out much hope...

About iPlayer.
Have a chat with Vodaphone. Streaming iPlayer over 3G IS allowed on Vodaphone contract, unlike my O2 contract. As long as your contract allows it, and you have the correct AP address, it should be fine. Vodaphone should be able to give you the setting.
Mine only works over Wlan.
FWIW, "... streaming over 3G is not currently available on iPhone handsets on any mobile network".
p.s. Just to be clear. You say "Tried setting my internet connections to 'always ask', tried setting it to default to Vodafone Live!".
iPlayer uses the Nokia browser "Web". So that's where you should make the setting "Ask when needed". It should then offer you the choice of whatever you've set in Destinations> Internet> then select whatever you've chosen as your GPRS connection.(as advised, or sent to you by Vodaphone).

Help with WindowsDesktopSSO and AMIdentity.getAttributes

Hi guys and girls,
I need some help from you experts.
I successfully setup, thanks to this guide
http://blogs.oracle.com/knittel/entry/opensso_windowsdesktopsso
and a lot of trial & errors and googling a Kerberos authentication between OpenAM version 9.5.2 and an Active Directory Server.
When I navigate to openAM page (from a domain machine) http://<openAMhost>:<port>/opensso, it doesn't ask for credentials ...
and I can see, with ieHttpHeaders, kerberos data exchange.
Without creating an Active Directory DataStore (pointing to the same domain where I use kerberos data) in openAM,
when I navigate (from a domain machine) to /opensso/idm/EndUser page, it always gives me:
"Plug-in com.sun.identity.idm.plugins.ldapv3.LDAPv3Repo encountered an ldap exception. LDAP Error 32: The entry specified in the request does not exist."
Since my aim was to get user information from a web app ... I thought I could have done this with an agent/SDK call as I usually do with "classic" authentication.
Now I created a J2EE Agent (on openAM) to protect one of my application deployed on a JBoss 4.2.1-GA server.
Agent configured with default options and these changes:
Agent Filter Mode: J2EE_POLICY
User Mapping Mode: USER_ID
User Attribute Name: tried both with employeenumber and uid
User Principal Flag: enabled
User Token Name: UserToken
FQDN Check: tried both with enabled and disabled
WebAuthentication Available : Enabled
In my application WEB-INF/jboss-web.xml looks like this:
     <?xml version="1.0" encoding="UTF-8"?>
     <jboss-web>
          <security-domain>java:/jaas/AMRealm</security-domain>
     </jboss-web>Usually, when I authenticate with "classic" (internal datastore) login, I can get user attributes programmatically with a code like this:
       private String getCredenzialiUtente(HttpServletRequest request)
            String                 SSOUsername      = null;
            SSOToken               ssoToken      = null;
            SSOTokenManager        manager           = null;
              try
                manager = SSOTokenManager.getInstance();
                if ( manager == null)
                     throw new RuntimeException("Unable to Get: SSOTokenManager");
                String ssoTokenID = AmFilterManager.getAmSSOCache().getSSOTokenForUser(request);
                ssoToken = manager.createSSOToken(ssoTokenID);
                if ( ssoToken == null )
                      throw new RuntimeException("Unable to Get: TokenForUser");
                AMIdentity amid = new AMIdentity(ssoToken);
                if(amid == null)
                   throw new RuntimeException("Unable to Get: UserIdentity");
                SSOUsername = amid.getName();
                System.out.println("######### USERNAME FROM SSO: " + SSOUsername);
                Set<String> info = new HashSet<String>();
                info.add("uid");
                info.add("givenName");
                java.util.Map mappa = amid.getAttributes(info);
                if ( mappa != null )
                    java.util.Set insieme = mappa.keySet();
                    java.util.Iterator it = insieme.iterator();
                    while ( it.hasNext() )
                        String n = it.next().toString();
                        System.out.println( n + " ==> " + mappa.get(n) );
                else
                    System.err.println(" DAMN - NO ATTR ");
          catch (Exception exception)
            exception.getMessage();
            exception.printStackTrace();
          System.out.println("OUT getCredenzialiUtente: " + SSOUsername);
          return SSOUsername;
        }        When I log to console with default "ldapService" module (outside the domain), I can get something like:
     2011-09-29 13:14:38,733 INFO [STDOUT] ####################################### USER = amadmin
     2011-09-29 13:15:32,250 INFO [STDOUT] IN getCredenzialiLAit
     2011-09-29 13:15:32,260 INFO [STDOUT] ######### USERNAME DA SSO: a2zarrillo
     2011-09-29 13:15:32,291 INFO [STDOUT] uid ==> [a2zarrillo]
     2011-09-29 13:15:32,291 INFO [STDOUT] givenName ==> [Antonio2]
     2011-09-29 13:15:32,311 INFO [STDOUT] OUT getCredenziali: a2zarrillo
     2011-09-29 13:15:32,321 INFO [STDOUT] ####################################### USER = a2zarrillobut when i try to login from inside the domain (with kerberos, so no credentials) with a domain user, I get:
     2011-09-29 13:15:39,496 INFO [STDOUT] IN getCredenzialiLAit
     2011-09-29 13:15:39,503 INFO [STDOUT] ######### USERNAME DA SSO: tonyweb
     2011-09-29 13:15:39,550 ERROR [STDERR] Message:Plug-in encountered an ldap exception. LDAP Error 32: The entry specified in the request does not exist.
     2011-09-29 13:15:39,554 ERROR [STDERR]      at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
     2011-09-29 13:15:39,560 ERROR [STDERR]      at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:39)
     2011-09-29 13:15:39,562 ERROR [STDERR]      at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:27)
     2011-09-29 13:15:39,566 ERROR [STDERR]      at java.lang.reflect.Constructor.newInstance(Constructor.java:513)
     2011-09-29 13:15:39,574 ERROR [STDERR]      at com.sun.identity.shared.jaxrpc.SOAPClient$SOAPContentHandler.createResourceBasedException(SOAPClient.java:834)
     2011-09-29 13:15:39,575 ERROR [STDERR]      at com.sun.identity.shared.jaxrpc.SOAPClient$SOAPContentHandler.endDocument(SOAPClient.java:800)
     2011-09-29 13:15:39,578 ERROR [STDERR]      at org.apache.xerces.parsers.AbstractSAXParser.endDocument(Unknown Source)
     2011-09-29 13:15:39,582 ERROR [STDERR]      at org.apache.xerces.impl.XMLDocumentScannerImpl.endEntity(Unknown Source)
     2011-09-29 13:15:39,587 ERROR [STDERR]      at org.apache.xerces.impl.XMLEntityManager.endEntity(Unknown Source)
     2011-09-29 13:15:39,592 ERROR [STDERR]      at org.apache.xerces.impl.XMLEntityScanner.load(Unknown Source)
     2011-09-29 13:15:39,598 ERROR [STDERR]      at org.apache.xerces.impl.XMLEntityScanner.skipSpaces(Unknown Source)
     2011-09-29 13:15:39,600 ERROR [STDERR]      at org.apache.xerces.impl.XMLDocumentScannerImpl$TrailingMiscDispatcher.dispatch(Unknown Source)
     2011-09-29 13:15:39,604 ERROR [STDERR]      at org.apache.xerces.impl.XMLDocumentFragmentScannerImpl.scanDocument(Unknown Source)
     2011-09-29 13:15:39,607 ERROR [STDERR]      at org.apache.xerces.parsers.XML11Configuration.parse(Unknown Source)
     2011-09-29 13:15:39,609 ERROR [STDERR]      at org.apache.xerces.parsers.XML11Configuration.parse(Unknown Source)
     2011-09-29 13:15:39,613 ERROR [STDERR]      at org.apache.xerces.parsers.XMLParser.parse(Unknown Source)
     2011-09-29 13:15:39,616 ERROR [STDERR]      at org.apache.xerces.parsers.AbstractSAXParser.parse(Unknown Source)
     2011-09-29 13:15:39,621 ERROR [STDERR]      at org.apache.xerces.jaxp.SAXParserImpl$JAXPSAXParser.parse(Unknown Source)
     2011-09-29 13:15:39,625 ERROR [STDERR]      at com.sun.identity.shared.jaxrpc.SOAPClient.send(SOAPClient.java:343)
     2011-09-29 13:15:39,633 ERROR [STDERR]      at com.sun.identity.shared.jaxrpc.SOAPClient.send(SOAPClient.java:311)
     2011-09-29 13:15:39,636 ERROR [STDERR]      at com.sun.identity.idm.remote.IdRemoteServicesImpl.getAttributes(IdRemoteServicesImpl.java:229)
     2011-09-29 13:15:39,639 ERROR [STDERR]      at com.sun.identity.idm.remote.IdRemoteCachedServicesImpl.getAttributes(IdRemoteCachedServicesImpl.java:402)
     2011-09-29 13:15:39,642 ERROR [STDERR]      at com.sun.identity.idm.AMIdentity.getAttributes(AMIdentity.java:344)
     2011-09-29 13:15:39,645 ERROR [STDERR]      at org.apache.jsp.MainPageJSP_jsp.getCredenzialiUtente(MainPageJSP_jsp.java:63)
     2011-09-29 13:15:39,648 ERROR [STDERR]      at org.apache.jsp.MainPageJSP_jsp._jspService(MainPageJSP_jsp.java:217)
     2011-09-29 13:15:39,653 ERROR [STDERR]      at org.apache.jasper.runtime.HttpJspBase.service(HttpJspBase.java:70)
     2011-09-29 13:15:39,660 ERROR [STDERR]      at javax.servlet.http.HttpServlet.service(HttpServlet.java:803)
     2011-09-29 13:15:39,664 ERROR [STDERR]      at org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:387)
     2011-09-29 13:15:39,666 ERROR [STDERR]      at org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:320)
     2011-09-29 13:15:39,669 ERROR [STDERR]      at org.apache.jasper.servlet.JspServlet.service(JspServlet.java:266)
     2011-09-29 13:15:39,673 ERROR [STDERR]      at javax.servlet.http.HttpServlet.service(HttpServlet.java:803)
     2011-09-29 13:15:39,676 ERROR [STDERR]      at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:290)
     2011-09-29 13:15:39,678 ERROR [STDERR]      at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:206)
     2011-09-29 13:15:39,683 ERROR [STDERR]      at com.sun.identity.agents.filter.AmAgentBaseFilter.allowRequestToContinue(AmAgentBaseFilter.java:127)
     2011-09-29 13:15:39,685 ERROR [STDERR]      at com.sun.identity.agents.filter.AmAgentBaseFilter.doFilter(AmAgentBaseFilter.java:76)
     2011-09-29 13:15:39,690 ERROR [STDERR]      at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:235)
     2011-09-29 13:15:39,697 ERROR [STDERR]      at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:206)
     2011-09-29 13:15:39,701 ERROR [STDERR]      at org.apache.catalina.core.ApplicationDispatcher.invoke(ApplicationDispatcher.java:687)
     2011-09-29 13:15:39,705 ERROR [STDERR]      at org.apache.catalina.core.ApplicationDispatcher.processRequest(ApplicationDispatcher.java:469)
     2011-09-29 13:15:39,710 ERROR [STDERR]      at org.apache.catalina.core.ApplicationDispatcher.doForward(ApplicationDispatcher.java:403)
     2011-09-29 13:15:39,713 ERROR [STDERR]      at org.apache.catalina.core.ApplicationDispatcher.forward(ApplicationDispatcher.java:301)
     2011-09-29 13:15:39,716 ERROR [STDERR]      at com.sun.faces.context.ExternalContextImpl.dispatch(ExternalContextImpl.java:408)
     2011-09-29 13:15:39,725 ERROR [STDERR]      at com.sun.faces.application.ViewHandlerImpl.executePageToBuildView(ViewHandlerImpl.java:442)
     2011-09-29 13:15:39,729 ERROR [STDERR]      at com.sun.faces.application.ViewHandlerImpl.renderView(ViewHandlerImpl.java:115)
     2011-09-29 13:15:39,730 ERROR [STDERR]      at javax.faces.application.ViewHandlerWrapper.renderView(ViewHandlerWrapper.java:178)
     2011-09-29 13:15:39,734 ERROR [STDERR]      at com.cid.faces.application.ViewHandlerImpl.renderView(ViewHandlerImpl.java:92)
     2011-09-29 13:15:39,741 ERROR [STDERR]      at com.sun.rave.web.ui.appbase.faces.ViewHandlerImpl.renderView(ViewHandlerImpl.java:295)
     2011-09-29 13:15:39,744 ERROR [STDERR]      at com.sun.faces.lifecycle.RenderResponsePhase.execute(RenderResponsePhase.java:106)
     2011-09-29 13:15:39,747 ERROR [STDERR]      at com.sun.faces.lifecycle.LifecycleImpl.phase(LifecycleImpl.java:251)
     2011-09-29 13:15:39,750 ERROR [STDERR]      at com.sun.faces.lifecycle.LifecycleImpl.render(LifecycleImpl.java:144)
     2011-09-29 13:15:39,753 ERROR [STDERR]      at javax.faces.webapp.FacesServlet.service(FacesServlet.java:245)
     2011-09-29 13:15:39,761 ERROR [STDERR]      at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:290)
     2011-09-29 13:15:39,765 ERROR [STDERR]      at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:206)
     2011-09-29 13:15:39,768 ERROR [STDERR]      at com.cid.faces.webapp.CidWebUIFilter._invokeDoFilter(CidWebUIFilter.java:239)
     2011-09-29 13:15:39,776 ERROR [STDERR]      at com.cid.faces.webapp.CidWebUIFilter._doFilterImpl(CidWebUIFilter.java:196)
     2011-09-29 13:15:39,780 ERROR [STDERR]      at com.cid.faces.webapp.CidWebUIFilter.doFilter(CidWebUIFilter.java:80)
     2011-09-29 13:15:39,788 ERROR [STDERR]      at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:235)
     2011-09-29 13:15:39,793 ERROR [STDERR]      at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:206)
     2011-09-29 13:15:39,797 ERROR [STDERR]      at com.sun.identity.agents.filter.AmAgentBaseFilter.allowRequestToContinue(AmAgentBaseFilter.java:127)
     2011-09-29 13:15:39,803 ERROR [STDERR]      at com.sun.identity.agents.filter.AmAgentBaseFilter.doFilter(AmAgentBaseFilter.java:76)
     2011-09-29 13:15:39,807 ERROR [STDERR]      at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:235)
     2011-09-29 13:15:39,810 ERROR [STDERR]      at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:206)
     2011-09-29 13:15:39,813 ERROR [STDERR]      at org.jboss.web.tomcat.filters.ReplyHeaderFilter.doFilter(ReplyHeaderFilter.java:96)
     2011-09-29 13:15:39,820 ERROR [STDERR]      at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:235)
     2011-09-29 13:15:39,825 ERROR [STDERR]      at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:206)
     2011-09-29 13:15:39,829 ERROR [STDERR]      at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:230)
     2011-09-29 13:15:39,833 ERROR [STDERR]      at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:175)
     2011-09-29 13:15:39,836 ERROR [STDERR]      at org.jboss.web.tomcat.security.SecurityAssociationValve.invoke(SecurityAssociationValve.java:179)
     2011-09-29 13:15:39,843 ERROR [STDERR]      at org.jboss.web.tomcat.security.JaccContextValve.invoke(JaccContextValve.java:84)
     2011-09-29 13:15:39,846 ERROR [STDERR]      at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:128)
     2011-09-29 13:15:39,851 ERROR [STDERR]      at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:104)
     2011-09-29 13:15:39,854 ERROR [STDERR]      at org.jboss.web.tomcat.service.jca.CachedConnectionValve.invoke(CachedConnectionValve.java:157)
     2011-09-29 13:15:39,857 ERROR [STDERR]      at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:109)
     2011-09-29 13:15:39,860 ERROR [STDERR]      at org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.java:241)
     2011-09-29 13:15:39,862 ERROR [STDERR]      at org.apache.coyote.http11.Http11Processor.process(Http11Processor.java:844)
     2011-09-29 13:15:39,866 ERROR [STDERR]      at org.apache.coyote.http11.Http11Protocol$Http11ConnectionHandler.process(Http11Protocol.java:580)
     2011-09-29 13:15:39,870 ERROR [STDERR]      at org.apache.tomcat.util.net.JIoEndpoint$Worker.run(JIoEndpoint.java:447)
     2011-09-29 13:15:39,874 ERROR [STDERR]      at java.lang.Thread.run(Thread.java:619)
     2011-09-29 13:15:39,877 INFO [STDOUT] OUT getCredenziali: tonywebAs you can see I'm using the "sample" agentApp.war.
What am I missing ? It "crashes" as for getAttributes() call :/
I thought it could be because I didn't setup LDAP DataStore ... so I set up Active Directory Data Store.
While in openAM console (from outside domain) I can see (from Subjects tab) Active Directory users and relative information
(like FirstName (=givenName), Surname (=sn), Full Name (=cn), etc.) ... when I try again with idm/EndUser (from a domain machine)
I get the same error:
     Message:Plug-in encountered an ldap exception. LDAP Error 32: The entry specified in the request does not exist.What should I do now ?
If you need more clarifications ... just ask :)
Thank you in advance and sorry for the big post.
Best Regards,
Tony
P.D. By the way, my OpenAM configuration does not create any "amAuthWindowsDesktopSSO.log" :(
I setup, from opensso/Debug.jsp message level for Authentication ... but it still doesn't create this log ... can you please tell me how to let openAM write it ?
Again thank you

Weird enough, changing to ADAM data store (and not "standard" AD datastore) solved the problem :D
I still wonder why since both plugins share the same java [implementing] class...
Regards,
Tony

Can anyone help with icloud and apple accounts getting mixed up on 2 phones?

Basically husband upgraded from 4s to 5c. Gave dad 4s. I tried to set his dad up with icloud and apple id but didn't realise husbands old sim card was in 4s. Now neither phone works and husband very annoyed his apple id and password don't work anymore. Please help!!!

Hi Chris
So husband got new phone. Was all set up and up and running when we left the shop
Gave dad the old phone. It was locked to Vodafone so we had to ask them to unlock. He then got his three sim cut down to fit.
Weeks after husband had his 5c we went to dads to set his 4s up. I upgraded it to latest software iOS something. Anyway didn't realise it was husbands old sim still in phone.
After upgrade it asked me to set up apple account (I think) could have been icloud. Anyway I started setting it up with dads email and password choice. Husband then saw message on his 5c saying his dads email was being added to something on his phone.
At this point I left alone but now when husband tries to use his apple id for apps etc it says invalid user id or password. It's as though the 2 have got mixed up. Bit it won't let him reset his password?
Does this make sense?

Help with httprequests and responses

it is my first time writing a servlet, but i need one to work with a project i'm working on. I have a class that will do all the methods on the server side of the project, but my problem now which i need to resolve, is how to get my client side app (made in flash mx) to work with my servlet and communicate the xml information i'm getting on the server back and forth.
I know that you must answer a httpRequest in the servlet, and i know this must be sent somehow from the clientside app, but i need information and help on how to get information sent in this request the right way, and also help on how to properly format a response that will work.
from what i know so far- it looks like the type of client-side app isn't important, as long as the request is sent right- so knowing that, flash and java should work fine in communication as long as flash sends a valid request and java answers it right.
could anyone help me with information and/or help about how the requests and responses send information and what code you need to write to get information (even generalized code will work)
Help would be really really appreciated.
-mike

To get data to and from the server and client, you'll have to seriaze it at one end and deserialize it at the other end.
I don't know much about Flash MX but a java program on the client can exchange data with a servlet using the above means.
For example, to read a string from a servlet using a java program on the client, you do the following:
On the servlet:
1. set content type to 'application/x-java-serialized-object'
2. Get an output stream thus:
ObjectOutputStream outStream =
new ObjectOutputStream(response.getOutputStream());
3. Write the data and flush the stream to be sure that all content has been sent:
outStream.writeObject(myString);
outStream.flush();
On the client (java prog):
1. get a URL: URL dataURL = new URL(protocol, host, port, address)
2. connect to the URL: URLConnection connection = dataURL.openConnection();
3. for fresh results everytime, turn off caching:
connection.setUseCaches(false)
4. get an input stream:
ObjectInputStream in = new ObjectInputStream(connection.getInputStream());
5. Get your string thus:
String myString = (String) in.readObject();
This is a very simplified example (you'll have to catch exception an a reall application).
I recommend the book 'Core Servlet and JavaServer Pages' by Marty Hall
http://www.coreservlets.com

Help with splitting and arranging clips

Hi All,
Can some please help a complete noob by explaining their simple workflow for FCE HD from after capture to edit.
I am new to digital editing and am working my way through Tom's book but am a little confused in regards to arranging and organising my clips. I have a new project (My niece's 1st B'day party) which currently has 1 master clip (I think this is the terminology) with several (27) segments after running DV Start/Stop.
This is where I get confused. I want to arrange the segments into Bins, for example: Birthday girl, cake, games etc... But there is something about relationships between master clip, segments and subclips which I don't understand.
How is the best way to "cut up" (and is that the best way) the segments into smaller master clips so i can rename then, rearrange them and add comments in preperation for editing?
Sorry for the long post, but when you don't really know what you want to say you end up saying a lot
Cheers.
Andrew

I don't use the Master/Subclip relationships. My method of sorting out various types of clip, by subject (your examples of "Birthday girl, cake, games etc...") is to slide (click, hold and drag) all obviously bad clips into V3 and ignore (mostly), and then slide all the Birthday girl clips on to V2 and move them sideways to group them closer together, then do the same for each other group. This leaves in V1 some shots such as establishing shots, closeups of decorations, departures etc. which you know where to put (eg., establishing shots at the beginning, closeups cut in somewhere where suitable as the editing proceeds). Next, I drag down and left or right various clips from V2 to V1 to their appropriate positions in order, leaving gaps between here and there to avoid having to move sets of clips left and right too often to make room. Then I set In and Out points in the Timeline (or Viewer) and close gaps between the clips within each set and see how that set looks. When all the material has gone through that process I check the whole video and make (usually) minor) changes, then do transitions and set audio levels, then leave it for a few days to look at it afresh.
Is this a bizarre method? What do you pros do?

C3 touch and type HELP with mms and email

I have a C3-01 touch and type my provider is AT & T I need any help to get my email settings and internet settings AT & T have been NO help since i did NOT buy my phone threw them!!! At first I had trouble with receiving pic messages and send pic messaging so i sent a question threw nokia and someone had the settings i followed the steps and now i can receive and send pic messages and AT & Twas trying to tell me I wouldn't be able to since i didn't buy my phone threw them they were of NO help so now i am asking anyone that can help again i need the steps to set my phone so i can get my email and internet any one with info let me know THANK YOU!!! Iove this phone i just can't get any support from AT & T

herzlos:
What firmwire do you currently have?
Turn off your phone and then turn on your phone. Usually resetting the phone temporarily fixes the problem
My Nokia C3-01 Software details:
V 05.60
06-10-10
RM-640
(c) Nokia
Found this by: Menu>Settings>Phone>Phone updates>Curr. sw details

Help with PS and HDR Effect Pro from Nik

I altready have a help request into Nik Software, but was hoping someone here could offer some suggestions.
I'm running the Nik Complete software program on Win 7 64Bit, Raid 5 machine. 8800 GTS 512 MB card; 12gb of RAM, i7 quad core, 2.67 GH, PS CS5 and Lightroom 3.2, Wacom Intuos 3 tablet.
I have the most updated drivers for video, wacom tablet. OS is current with updates. PS CS5 is updated, but I am NOT running Lightroom's 3.3 RC.
I updated all software updates for the NIK software collection from their site and still have the same problem even after uninstall and re-install.
When I attempt to run HDR Efect Pro I get the menu window to select my images, click ok and with in seconds I get the message that Adobe Photoshop CS5 has stoopped working and must close...
I've gone to their site and looked into their FAQ/troubleshooting and did all their recommendations, update drivers, look for color profiles with 0 Bytes in the system color spool for both 32 and 64 bit apps and still no luck. This also happens with CS4 and CS3 and if I attempt to use the program form Lightroom and Bridge. Any ideas, work arounds, suggestions? Their automatic reply from my support request says 2-3 days due to the high populaity of their program!!!
Thanks for any and all help.

Outside of suggesting some pretty generic things, I can't offer much help... I don't use Nik products myself
You could try disabling the "Use OpenGL Drawing" setting in Photoshop as a workaround to see if that helps. Perhaps between Photoshop and the plug-in problems are being caused in the OpenGL driver for your particular video card.
Also, given that 3rd party plug-ins and Photoshop could be competing for memory, you could try changing the amount of memory Photoshop is allowed to use in the Edit - Preferences - Performance dialog.
Good luck.
-Noel

Help with BufferedImage and JPanel

I have a program that should display some curves, but thats not the problem, the real problem is when i copy the image contained in the JPanel to the buffered image then i draw something there and draw it back to the JPanel. My panel initialy its white but after the operation it gets gray
Please if some one could help with this
here is my code divided in three classes
//class VentanaPrincipal
package gui;
import java.awt.BorderLayout;
import java.awt.FlowLayout;
import java.awt.GridBagConstraints;
import java.awt.GridBagLayout;
import java.awt.Insets;
import java.awt.event.ActionEvent;
import java.awt.event.ActionListener;
import java.awt.image.BufferedImage;
import javax.swing.BorderFactory;
import javax.swing.JButton;
import javax.swing.JLabel;
import javax.swing.JSeparator;
import javax.swing.border.LineBorder;
import javax.swing.JMenuItem;
import javax.swing.JPanel;
import javax.swing.JMenu;
import javax.swing.JMenuBar;
* This code was edited or generated using CloudGarden's Jigloo
* SWT/Swing GUI Builder, which is free for non-commercial
* use. If Jigloo is being used commercially (ie, by a corporation,
* company or business for any purpose whatever) then you
* should purchase a license for each developer using Jigloo.
* Please visit www.cloudgarden.com for details.
* Use of Jigloo implies acceptance of these licensing terms.
* A COMMERCIAL LICENSE HAS NOT BEEN PURCHASED FOR
* THIS MACHINE, SO JIGLOO OR THIS CODE CANNOT BE USED
* LEGALLY FOR ANY CORPORATE OR COMMERCIAL PURPOSE.
public class VentanaPrincipal extends javax.swing.JFrame {
          //Set Look & Feel
          try {
               javax.swing.UIManager.setLookAndFeel("com.sun.java.swing.plaf.windows.WindowsLookAndFeel");
          } catch(Exception e) {
               e.printStackTrace();
     private JMenuItem helpMenuItem;
     private JMenu jMenu5;
     private JMenuItem deleteMenuItem;
     private JSeparator jSeparator1;
     private JMenuItem pasteMenuItem;
     private JLabel jLabel4;
     private JLabel jLabel5;
     private JLabel jLabel3;
     private JLabel jLabel2;
     private JLabel jLabel1;
     private JButton jSPLineButton;
     private JButton jHermiteButton;
     private JButton jBezierButton;
     private JPanel jPanel2;
     private JPanel jPanel1;
     private JMenuItem jResetMenuItem1;
     private JMenuItem copyMenuItem;
     private JMenuItem cutMenuItem;
     private JMenu jMenu4;
     private JMenuItem exitMenuItem;
     private JSeparator jSeparator2;
     private JMenu jMenu3;
     private JMenuBar jMenuBar1;
      * Variables no autogeneradas
     private int botonSeleccionado;
     * Auto-generated main method to display this JFrame
     public static void main(String[] args) {
          VentanaPrincipal inst = new VentanaPrincipal();
          inst.setVisible(true);
     public VentanaPrincipal() {
          super();
          initGUI();
     private void initGUI() {
          try {
                    this.setTitle("Info3 TP 2");
                         jPanel1 = new pizarra();
                         getContentPane().add(jPanel1, BorderLayout.WEST);
                         jPanel1.setPreferredSize(new java.awt.Dimension(373, 340));
                         jPanel1.setMinimumSize(new java.awt.Dimension(10, 342));
                         jPanel1.setBackground(new java.awt.Color(0,0,255));
                         jPanel1.setBorder(BorderFactory.createCompoundBorder(
                              new LineBorder(new java.awt.Color(0, 0, 0), 1, true),
                              null));
                         BufferedImage bufimg = (BufferedImage)jPanel1.createImage(jPanel1.getWidth(), jPanel1.getHeight());
                         ((pizarra) jPanel1).setBufferedImage(bufimg);
                         jPanel2 = new JPanel();
                         getContentPane().add(jPanel2, BorderLayout.CENTER);
                         GridBagLayout jPanel2Layout = new GridBagLayout();
                         jPanel2Layout.rowWeights = new double[] {0.0, 0.0, 0.0, 0.0};
                         jPanel2Layout.rowHeights = new int[] {69, 74, 76, 71};
                         jPanel2Layout.columnWeights = new double[] {0.0, 0.0, 0.1};
                         jPanel2Layout.columnWidths = new int[] {83, 75, 7};
                         jPanel2.setLayout(jPanel2Layout);
                              jBezierButton = new JButton();
                              jPanel2.add(jBezierButton, new GridBagConstraints(1, 0, 1, 1, 0.0, 0.0, GridBagConstraints.CENTER, GridBagConstraints.BOTH, new Insets(0, 0, 0, 0), 0, 0));
                              jBezierButton.setText("Bezier");
                              jBezierButton.setFont(new java.awt.Font("Tahoma",0,10));
                              jBezierButton.addActionListener(new ActionListener() {
                                   public void actionPerformed(ActionEvent evt) {
                                        bezierActionPerformed();
                              jHermiteButton = new JButton();
                              jPanel2.add(jHermiteButton, new GridBagConstraints(1, 1, 1, 1, 0.0, 0.0, GridBagConstraints.CENTER, GridBagConstraints.BOTH, new Insets(0, 0, 0, 0), 0, 0));
                              jHermiteButton.setText("Hermite");
                              jHermiteButton.setFont(new java.awt.Font("Tahoma",0,10));
                              jSPLineButton = new JButton();
                              jPanel2.add(jSPLineButton, new GridBagConstraints(1, 2, 1, 1, 0.0, 0.0, GridBagConstraints.CENTER, GridBagConstraints.BOTH, new Insets(0, 0, 0, 0), 0, 0));
                              jSPLineButton.setText("SP Line");
                              jSPLineButton.setFont(new java.awt.Font("Tahoma",0,10));
                              jLabel1 = new JLabel();
                              jPanel2.add(jLabel1, new GridBagConstraints(0, 3, 1, 1, 0.0, 0.0, GridBagConstraints.CENTER, GridBagConstraints.NONE, new Insets(0, 0, 0, 0), 0, 0));
                              jLabel1.setText("Posicion Mouse");
                              jLabel2 = new JLabel();
                              jPanel2.add(jLabel2, new GridBagConstraints(1, 3, 1, 1, 0.0, 0.0, GridBagConstraints.NORTH, GridBagConstraints.NONE, new Insets(12, 0, 0, 0), 0, 0));
                              jLabel2.setText("X:");
                              jLabel3 = new JLabel();
                              jPanel2.add(jLabel3, new GridBagConstraints(1, 3, 1, 1, 0.0, 0.0, GridBagConstraints.SOUTH, GridBagConstraints.NONE, new Insets(0, 0, 12, 0), 0, 0));
                              jLabel3.setText("Y:");
                              jLabel4 = new JLabel();
                              jPanel2.add(jLabel4, new GridBagConstraints(2, 3, 1, 1, 0.0, 0.0, GridBagConstraints.NORTH, GridBagConstraints.NONE, new Insets(12, 0, 0, 0), 0, 0));
                              jLabel4.setText("-");
                              jLabel5 = new JLabel();
                              jPanel2.add(jLabel5, new GridBagConstraints(2, 3, 1, 1, 0.0, 0.0, GridBagConstraints.SOUTH, GridBagConstraints.NONE, new Insets(0, 0, 12, 0), 0, 0));
                              jLabel5.setText("-");
               this.setSize(600, 400);
                    jMenuBar1 = new JMenuBar();
                    setJMenuBar(jMenuBar1);
                         jMenu3 = new JMenu();
                         jMenuBar1.add(jMenu3);
                         jMenu3.setText("Archivo");
                              jSeparator2 = new JSeparator();
                              jMenu3.add(jSeparator2);
                              exitMenuItem = new JMenuItem();
                              jMenu3.add(exitMenuItem);
                              exitMenuItem.setText("Exit");
                              jResetMenuItem1 = new JMenuItem();
                              jMenu3.add(jResetMenuItem1);
                              jResetMenuItem1.setText("Reset");
                         jMenu4 = new JMenu();
                         jMenuBar1.add(jMenu4);
                         jMenu4.setText("Edit");
                              cutMenuItem = new JMenuItem();
                              jMenu4.add(cutMenuItem);
                              cutMenuItem.setText("Cut");
                              copyMenuItem = new JMenuItem();
                              jMenu4.add(copyMenuItem);
                              copyMenuItem.setText("Copy");
                              pasteMenuItem = new JMenuItem();
                              jMenu4.add(pasteMenuItem);
                              pasteMenuItem.setText("Paste");
                              jSeparator1 = new JSeparator();
                              jMenu4.add(jSeparator1);
                              deleteMenuItem = new JMenuItem();
                              jMenu4.add(deleteMenuItem);
                              deleteMenuItem.setText("Delete");
                         jMenu5 = new JMenu();
                         jMenuBar1.add(jMenu5);
                         jMenu5.setText("Help");
                              helpMenuItem = new JMenuItem();
                              jMenu5.add(helpMenuItem);
                              helpMenuItem.setText("Help");
          } catch (Exception e) {
               e.printStackTrace();
     private void bezierActionPerformed(){
          botonSeleccionado = 1;
          ((pizarra) jPanel1).setTipoFigura(botonSeleccionado);
          ((pizarra) jPanel1).pintarGrafico();
//class graphUtils
package func;
import java.awt.Image;
import java.awt.Point;
import java.awt.image.BufferedImage;
public class graphUtils {
     public static void dibujarPixel(BufferedImage img, int x, int y, int color){
          img.setRGB(x, y, color);
     public static void dibujarLinea(BufferedImage img, int x0, int y0, int x1, int y1, int color){
        int dx = x1 - x0;
        int dy = y1 - y0;
        if (Math.abs(dx) > Math.abs(dy)) {          // Pendiente m < 1
            float m = (float) dy / (float) dx;
            float b = y0 - m*x0;
            if(dx < 0) dx = -1; else dx = 1;
            while (x0 != x1) {
                x0 += dx;
                dibujarPixel(img, x0, Math.round(m*x0 + b), color);
        } else
        if (dy != 0) {                              // Pendiente m >= 1
            float m = (float) dx / (float) dy;
            float b = x0 - m*y0;
            if(dy < 0) dy = -1; else dy = 1;
            while (y0 != y1) {
                y0 += dy;
                dibujarPixel(img, Math.round(m*y0 + b), y0, color);
     public static void dibujarBezier(BufferedImage img, Point puntos, int color){
//class pizarra
package gui;
import javax.swing.*;
import sun.awt.VerticalBagLayout;
import sun.security.krb5.internal.bh;
import java.awt.Color;
import java.awt.Graphics;
import java.awt.Graphics2D;
import java.awt.Image;
import java.awt.Point;
import java.awt.event.MouseEvent;
import java.awt.event.MouseListener;
import java.awt.image.BufferedImage;
import java.util.ArrayList;
import func.graphUtils;
* esta clase pizarra extiende la clase JPanel y se agregan las funciones de pintado
* y rellenado que se muestra en pantalla dentro del panel que se crea con esta clase
* @author victorg
public class pizarra extends JPanel implements MouseListener{
     private int tipoFigura;
     BufferedImage bufferImagen;
     Image img;
     Graphics img_gc;
     private Color colorRelleno, colorLinea;
     private Point puntosBezier[] = new Point[3];
     public pizarra(){
          super();
          addMouseListener(this);
          //this.setBackground(Color.BLUE);
          colorLinea = Color.BLUE;
     public void setTipoFigura(int seleccion){
          // se setea para ver si es bezier, hermite, SP line
          tipoFigura = seleccion;
     public void setTipoRelleno(int seleccion){
     public void setColorRelleno(Color relleno){
          colorRelleno = relleno;
     public void setColorLinea(Color linea){
          colorLinea = linea;
     public void setBufferedImage(BufferedImage bufimg){
          bufferImagen = bufimg;
     public void pintarGrafico(){
          Graphics g = this.getGraphics();
          g.setColor(colorLinea);
          //accion ejecutada cuando se selecciona para graficar un poligono
          if(tipoFigura == 1){// bezier
               if(bufferImagen == null){
                    //mantiene guardada la imagen cuando la pantalla pasa a segundo plano
                    bufferImagen = new BufferedImage(getWidth(), getHeight(), BufferedImage.TYPE_INT_RGB);
                    this.setBackground(Color.WHITE);
                    bufferImagen = (BufferedImage)createImage(getWidth(), getHeight());
                    //bufferImagen = this.createImage(getWidth(), getHeight());
               //g.drawImage(bufferImagen,0,0,this);
               graphUtils.dibujarLinea(bufferImagen,10, 10, 50, 50, colorLinea.getRGB());
               g.drawImage(bufferImagen,0,0,this);
     protected void paintComponent(Graphics g) { // llamado al repintar
          //setBackground(colorFondo);
          super.paintComponent(g);
//          Graphics2D g2 = (Graphics2D)g;
//          g2.drawImage(bufferImagen, 0,0, this);
//          g2.dispose();
     public void mouseClicked(MouseEvent arg0) {
     public void mousePressed(MouseEvent arg0) {
          // TODO Auto-generated method stub
     public void mouseReleased(MouseEvent arg0) {
          // TODO Auto-generated method stub
     public void mouseEntered(MouseEvent arg0) {
          // TODO Auto-generated method stub
     public void mouseExited(MouseEvent arg0) {
          // TODO Auto-generated method stub
}

1) Swing related questions should be posted in the Swing forum.
Custom painting should be done in the paintComponent(..) method. You created a "pintarGraphico" method to do the custom painting, but that method is only execute once. When Java determines that the panel needs to be repainted, the paintComponent() method is executed which simply does a super.paintComponent(), which in turn simply paints the background of the panel overwriting you custom painting.

T7700 help with setting up with tv and game consoles

Similar Messages

Maybe you are looking for