TA21041 I can not open some folders and get not have permission to open the folder
I can not open some folders and recieve the message: you do not have permission to open this folder. how I can solve it?
Select that folder, choose Get Info from the File menu, and give yourself read access under Sharing & Permissions. This shouldn't be done on folders in system directories.
(66976)
Similar Messages
-
Unable to open the photos in reviewer, every time I click on the photo on , it says do not have permission to view the photo. Please open the item in the finder choose the item and click on <get info>. What am I suppose to change in the setting on <get info>
Back up all data.
This procedure will unlock all your user files (not system files) and reset their ownership and access-control lists to the default. If you've set special values for those attributes on any of your files, they will be reverted. In that case, either stop here, or be prepared to recreate the settings if necessary. Do so only after verifying that those settings didn't cause the problem. If none of this is meaningful to you, you don't need to worry about it.
Step 1
If you have more than one user, and the one in question is not an administrator, then go to Step 2.
Triple-click anywhere in the following line on this page to select it:
{ sudo chflags -R nouchg,nouappnd ~ $TMPDIR..; sudo chown -R $UID:staff ~ $_; sudo chmod -R u+rwX ~ $_; chmod -R -N ~ $_; } 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window by pressing command-V. I've tested these instructions only with the Safari web browser. If you use another browser, you may have to press the return key after pasting.
You'll be prompted for your login password. Nothing will be displayed when you type it. You may get a one-time warning to be careful. If you don’t have a login password, you’ll need to set one before you can run the command. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
The command may take a few minutes to run, or perhaps longer if you have literally millions of files in your home folder. Wait for a new line ending in a dollar sign ($) to appear, then quit Terminal.
Step 2 (optional)
Take this step only if you have trouble with Step 1, if it frightens you, or if it doesn't solve the problem.
Start up in Recovery mode. When the OS X Utilities screen appears, select
Utilities ▹ Terminal
from the menu bar. A Terminal window will open.
In the Terminal window, type this:
res
Press the tab key. The partial command you typed will automatically be completed to this:
resetpassword
Press return. A Reset Password dialog will open. You’re not going to reset a password.
In the dialog, select the startup volume ("Macintosh HD," unless you gave it a different name) if it's not already selected.
Select your username from the menu labeled Select the user account if it's not already selected.
Under Reset Home Directory Permissions and ACLs, click the Reset button.
Select
▹ Restart
from the menu bar. -
I have downloaded a series of prison break but 3 episodes are saying "you do not have permission to access the requested resource" and "this episode can not be downloaded at this time" any idea how to fix this please??
I got this error with my iPad 3, my wife's iPhone 4, but not with my iPhone 4s.
-
my computer is telling me i do not have permission to access the requested resource to update my iphone 5 to the new ios 7. why is it telling me this and how can i fix it, I have updated itunes and everything
I saw this post at about 2:05 becasue I had the same problem. I just tried it again and now the update is downloading! just wait it out. I had to wait about 3.5 hours.
-
I had Copernic Desktop Search installed with an add in to Firefox. On removing CDTS it has left the add-in and the remove button is inactive ie greyed out and I can not delkete it or see the folder in the extensions. Help appreciated to get rid of it.
uninstalled firefox ....deleted all files still remaining under mozilla firefox directory in program files ... to avoid having to reprogram all my settings, reisntall all addons as well .. I did not remove anything from mozilla firefox that is stored in either appdata or under the windows users directory (if any)
... the as suggested reinstalled the latest version of the firefox browser using the link you provided in the email ..; tested and several issues still remain present and unresolved ....
so please this is urgent or I will have to jump browsers and start using chrome .. because we work 14 hours a day 6 (sometimes 7) days a week, to get ready for the launch of our newest venture and we cannot lose that much days on browser related issues ... so please instead of putting me through week long step process .. of do this .. do that .. can you please actually look into the issue from your end .. I use firefox for so many, many years thta I deserve this kind of support .. thnx Robert -
I recently purchased an external hard drive to back up my iMovies. When I try to open the movies on the backup I get a message "you may not have permission to modify that folder" How do I change permissions on the backup?
Hi
One Must NEVER move or alter any folders named
• iMovie Event's - or -
• iMovie Projects - or - alike
on DESKTOP/FINDER - Ever ! - ONLY Within the iMovie Program ! else all connections are broken and hard to impossibly to mend !
but rather do as described here under
Moving Event's and Project's
Connection - Either connect one Mac in Target mode to the other via FireWire. Or use an external hard disk !
(Target-Mode - Start one Mac e.g. laptop - BUT keep T-key down during full up-start - Now a FW-symbol is jumping around the screen and it will work as an external hard disk when connected to the other Mac)
A. The External Hard Disk - MUST BE - Mac OS Extended (hfs) formatted to work for Video. UNIX/DOS/FAT32/Mac OS Exchange works for most other things but not for Video whatever program is used (iMovie or FinalCut)
B. Should be a FireWire one as USB/USB2 performs badly to me and especially when filling up
C. Do never Move or Alter any folder named
• iMovie Event's - or -
• iMovie Project's
on DeskTop/Finder - as this will result in iMovie losing connections to them and repair can be anything from hard to impossibly
D. Moving and Copying must be done within iMovie application and Events to Events - and - Project's to Project's.
E. Moving Project's to Event's - Do not work for me - I have to export project as a QuickTime movie then Import this into Events.
Event's window can show two faces
Like this
or like this
from one hard disk Event - You can move it to the other hard disk
You can not (at least not me) move Event to Project or other way around only
Event to Event and Project to Project
Yours Bengt W -
I have recently started using iCloud on my laptop syncing it with my iPad. When the syncing process starts it stops and gives me a message something like: You do not have permission to sync this folder. Then it wants me to unlock and gives other suggestions. I have done them all and still cannot get the syncing process past this folder. I is a folder in my documents. Anyone have any solutions?
If you think this is a bug, you can report it here:
Apple - Mac OS X - Feedback -
A few days ago I bought a season of the series Psych off of iTunes. I was able to watch the first bunch without a problem but now all of a sudden when I try to watch one it says "You do not have permission to access the requested resource". I tried restarting my phone but that do not help. I cleared up a lot of space on my phone as well. I have and iPhone 4 with the update of iOS 6.1.3.
Are you using the same Apple ID that the purchase was linked to? I had this issue with a shared device, and the other person had logged out of my ID and logged in with hers.
If it's the same ID, then try redownloading the purchase. -
I'm trying to install a cd application and I keep getting the message 'you do not have permission to use the application FSP OS X' Even after selecting always allow and entering my login details it still won't accept it. Help!!..
Please repost in the Final Cut Pro forum. Have you considered upgrading your machine, if you are still running Leopard your machine may be as old as 5 years old. While this should not matter you probably won't get the performance you want out of a demanding app like FCP.
Best of luck. -
I have had this issue with my Macbook Pro ever since I bought it in November. If I start downloading a file with Safari, and the download gets interrupted, I am unable to resume downloading from the point where it was interrupted. Clicking on "resume downloading" button in the downloads list works fine it I do it immediately after the download is interrupted, but if a little time has elapsed (as little as a few minutes) since the interruption it will not let me resume the download, and I get the message in the downloads list "You do not have permission to access the requested resource." I have repaired my permissions...I don't know what else to do. Here's my system configuration:
Macbook Pro Mid-2012 Retina Display
2.3 GHz Intel Core i7
8 GB RAM
System 10.8.2
I just have to editorialize for a moment: My old Macbook Pro and my Mac Pro both worked great with Snow Leopard, but since upgrading the Mac Pro to Mountain Lion and buying the new Macbook I have had all kinds of issues like this. Tech support at Panic software, that I contacted because of issues with some of their software, told me that I was only one of many with Mountain Lion issues, but here we're over half a year since the release of 10.8 and we're only on system 10.8.2. Is anybody at Apple actually trying to fix the issues?
Thanks for anything you can tell me!If you think this is a bug, you can report it here:
Apple - Mac OS X - Feedback -
You do not have permission to view the System Landscape Directory.
Hello there,
When I accessed my SLD from portal, it took me to the page but kept saying:
- You do not have permission to view the System Landscape Directory. Minimum required: UME role with permission com.sap.lcr.LcrUser and J2EE role LcrUser. See the SLD Post-Installation Guide for details
- SLD not configured; configure the SLD in Administration first.
I searched on these forums for the above error. Got some results, but nothing really substantial that has helped/fixed my problem.
I also read a bit on SLD from the pdf file named: System Landscape
Directory of SAP NetWeaver 2004s
I also worked on the security roles and actions to individual
users or user groups like for ex: the above pdf file advised I map the security roles from Visual Administrator, to the created roles in the portal. I've done that too. Like create a user group: 'SAP_SLD_ADMINISTRATOR' and create a user role corresponding to it, which would be: 'LcrAdministrator'
Then, I went to visual administrator, and clicked on 'Assign User Groups to Roles'
Even after this, I tried to access the SLD from portal: It is still giving me the same error I mentioned above in bold italics.
Can somebody please help me how to fix this issue?
Thanks
Dino.Graham:
Thank you very much for making the effort to reply to my query.
But, it still hasnt solved my problem yet.. for some reason even though I followed your instructions and did what you advised.
I have attached a screenshot of my Visual Administrator screen that you advised me to modify/change.
Here it is: http://img166.imageshack.us/img166/2259/screenshot002co1.jpg
After I made the changes, I restarted the J2EE server and went to my portal SLD page: [http://org-x:50000/sld]
Tried authenticating usernames: LcrAdministrator and Administrator.
Both attempts resulted in the same error show below:
- You do not have permission to view the System Landscape Directory. Minimum required: UME role with permission com.sap.lcr.LcrUser and J2EE role LcrUser. See the SLD Post-Installation Guide for details
- SLD not configured; configure the SLD in Administration first.
I am wondering, if you would have another workaround regarding this issue, can you please let me know?
Thanks
Dino. -
Can anyone help me please? My iphone originally was linked to my PC. I downloaded over 3,000 pictures from my PC to my iphone. Since then my PC broke and now I have a macbook pro and the macbook doesn't recognize all the pictures from my pc. I get the following message.
-iTunes cannot sync photos to the iPhone "Daniel's iPhone" because you do not have write access to the folder "iChat Icons".Hi,
I picked up on this Post as I was searching for "iChat" in non iChat places.
A Mac will contain a Folder for "iChat Icons"
It is kept in Hard Drive/System/Library/Application Support/iChat icons
There are about 9 sub folders here including Planets, Guitars, Feng Shui and so on.
They are normally accessed in iChat to be your Own Buddy pic.
They way you have phrased your posts suggests you have a folder on your phone called "iChat icons" which may have been created by the PC.
For people who know more about iTunes than I do to help will need to know where this Folder is exactly.
10:43 PM Saturday; June 30, 2012
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
iMac 2.5Ghz 5i 2011 (Lion 10.7.2)
G4/1GhzDual MDD (Leopard 10.5.8)
MacBookPro 2Gb (Snow Leopard 10.6.8)
Mac OS X (10.6.8),
"Limit the Logs to the Bits above Binary Images." No, Seriously -
I just installed iTunes 10.5 (latest version as of 11 Jan 2012), onto a computer running Windows 7 Ultimate x64. I loaded my music library into it, it compiled the list and separated them by album. But even though I'd assigned most of the albums artwork through my Zune management software (a Microsoft product), almost none of them populated into iTunes. So I went through and started asking the software to try to find album artwork where possible.
I did this a few times album by album, then I decided to select multiple albums and see what happened. No problems. Then I selected all of the albums I had--about 600 in all--and asked it to get artwork. It seemed to process for a bit, then came back with the error, "Artwork for [album name] could not be located. You do not have permission to access the requested resource." I tried this on several individual albums, only to receive that same error.
The very first time I did it, I was told I needed an account with the iTunes store to make it work, so I signed in using an old Apple ID (the account had been inactive for so long it had been locked for security, I unlocked it and that seemed to be that). Then I did what I described above.
The weird thing--to me--is that I can still add artwork to the albums manually if I want to, from imagery stored locally on my own computer. The only thing it seems to have a problem with is when I ask it to go find artwork from the iTunes store.
Do I need to uninstall iTunes and then reinstall it? Did something go wrong with the process of authorizing the computer to work with the iTunes store? Do I need to de-authorize and then re-authorize the computer? Could this be something related to Windows permissions on the iTunes library?Right on about how to reset the warnings, it was exactly that.
I went through the steps to let iTunes through Windows Firewall, but still get the same problem when I access the iTunes store (and even though I followed the steps in the help file to the letter, I notice it still says iTunes is NOT enabled for it). And now, thanks to the re-enabled warnings, when I try to get it to download artwork for single albums, this is what I get:
"Artwork for [album name] could not be found. An unknown error occurred (-50)."
New results from the diagnostics too:
Microsoft Windows 7 x64 Ultimate Edition Service Pack 1 (Build 7601)
Acer Aspire 8930
iTunes 10.5.2.11
QuickTime 7.7.1
FairPlay 1.13.37
Apple Application Support 2.1.6
iPod Updater Library 10.0d2
CD Driver 2.2.0.1
CD Driver DLL 2.1.1.1
Apple Mobile Device 4.0.0.97
Apple Mobile Device Driver 1.57.0.0
Bonjour 3.0.0.10 (333.10)
Gracenote SDK 1.9.5.502
Gracenote MusicID 1.9.5.115
Gracenote Submit 1.9.5.143
Gracenote DSP 1.9.5.45
iTunes Serial Number 0034AA84038F17E0
Current user is an administrator.
The current local date and time is 2012-01-13 09:21:52.
iTunes is not running in safe mode.
WebKit accelerated compositing is enabled.
HDCP is supported.
Core Media is supported.
Video Display Information
NVIDIA, NVIDIA GeForce 9700M GT
**** External Plug-ins Information ****
No external plug-ins installed.
The drive Q: SEMC CD-ROM Rev 0001 is a USB 1 device.
iPodService 10.5.2.11 (x64) is currently running.
iTunesHelper 10.5.2.11 is currently running.
Apple Mobile Device service 3.3.0.0 is currently running.
**** Network Connectivity Tests ****
Network Adapter Information
Adapter Name: {403AFC2C-1FCE-43B2-B9E8-D414B29FF5D1}
Description: Intel(R) WiFi Link 5100 AGN
IP Address: 10.100.3.244
Subnet Mask: 255.255.248.0
Default Gateway: 10.100.0.1
DHCP Enabled: Yes
DHCP Server: 10.100.0.1
Lease Obtained: Fri Jan 13 09:00:56 2012
Lease Expires: Sat Jan 14 09:00:56 2012
DNS Servers: 202.174.158.10
8.8.8.8
Adapter Name: {B50EA825-FB09-459D-8855-77E5A43E18B1}
Description: Atheros AR8121/AR8113/AR8114 PCI-E Ethernet Controller
IP Address: 0.0.0.0
Subnet Mask: 0.0.0.0
Default Gateway: 0.0.0.0
DHCP Enabled: Yes
DHCP Server:
Lease Obtained: Thu Jan 01 04:30:00 1970
Lease Expires: Thu Jan 01 04:30:00 1970
DNS Servers:
Active Connection: LAN Connection
Connected: Yes
Online: Yes
Using Modem: No
Using LAN: Yes
Using Proxy: No
SSL 3.0 Support: Enabled
TLS 1.0 Support: Enabled
Firewall Information
Windows Firewall is on.
iTunes is NOT enabled in Windows Firewall.
Connection attempt to Apple web site was successful.
Basic connection to the store failed.
An unknown error occurred (-50).
Connection attempt to Gracenote server was successful.
Last successful iTunes Store access was 2012-01-12 07:09:14. -
Home Sharing Problem: "You do not have permission to access the requested resource"
This problem has been posted numerous times here with not one single answer that I can find. Not only does it take about fifteen minutes for Home Sharing to load on my iPad, once it does load I get the "You do not have permission to access the requested resource" when I try to play any video. I've tried resetting everything. Even home videos won't play via Home Sharing. Is there a known bug that someone can tell me about? Or is Home Sharing on iPad just broken.
Possibly related: videos that play on my iPhone on Facebook won't play on my iPad. The iPad is newer and more powerful, you think it would be the other way around. I have never used a jail break on anything. I have never installed any kind of security software.
iPhone 4, iPad 3, mid-2010 27" iMac, Airport Extreme all on the same network with the same iCloud ID.I have been having the same issues on all my iPads / iPhones and can't come up with much info either.
I just seemed to fix it by quitting the app on the device, changing my wifi network to the 5Ghz band and retrying. Loads quick and plays every time (for the last 5 minutes at least)
I did read that there is a bug, in that if you close down the app after you have watched the video(s) you won't get the "permission" error. Seems to be working.
Not super helpful but I feel your pain. -
Folks:
I am having an issue with a system, which is throwing a really odd error message. When the user tries to modify the AD group, they receive the following error message:
“You do not have permission to modify the group”, which is then followed by what appears to be Chinese or Japanese characters. In addition, the characters
randomly change, which makes me believe the characters are ASCII values or equivalent, not specific values for any coherent words provided by installed language packages.
Has anyone seen this issue before? If so can you offer any advice?
Thank you.Hi,
This issue can be caused due to the permissions under Security tab are modified incorrectly.
Please use delete control wizard to reassign the permissions or correct the permissions under Security tab manually.
For more information, please refer to the following Microsoft articles:
Delegate Control of an Organizational Unit
http://technet.microsoft.com/en-us/library/cc732524.aspx
Delegate Control Wizard Cannot Be Used to Remove Groups or Users
http://support.microsoft.com/kb/229873
Regards,
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.
Which attributes should be checked to grant user permissions to Add users to Members Of option?
Thanks. -
Every time I try to access anything in the itunes store from my pc i get the following error "We could not complete your iTunes Store request. You do not have permission to access the requested resource. There was an error in the itunes store. lease try again later."
I have accessed the store just fine on my iphone and ipad.
I have restarted itunes, restarted the computer. reinstalled itunes.
Any ideas?Were you using Adobe Creative Cloud to download the application or the Adobe Download Manager? Was this a 'try before you buy' application?
It depends on how you're downloading and where you're downloading from before we can give you a satisfactory answer...
Clinton
MacBook Pro (15-inch Late 2011), OS Mavericks 10.9.4, 16GB Crucial RAM, Crucial M500 960GB SSD, 27” Apple Thunderbolt Display
Maybe you are looking for
-
Unable to see my iPod in i Tunes. New computer with Windows 8. How to make it work as it certaninly is not automated of seamless and more than likely an itunes issue
-
Download CS6 onto NEW macbook air using previous SERIAL NUMBER i had before?
Hi there. I purchased photoshop cs6 for download for my macbook air in 2012. recently i broke my mac, losing everything i had on it. i'm wondering is there a way i can download cs6 again for my new mac,and use the valid serial number i had before. th
-
BW Statistics Load Specified Time
Hi, I´m trying to load an specified period in a BW statistics InfoCubes. In 0BWTC_C02 infocube i can select "Calday" but in the others InfoCubes i don´t get activate check for Calday selection. How can i activate "calday" selection for Infocubes: 0BW
-
I just installed LR 5 and want to process an HDR photo in CS 5. When I select CS 5 on the "Edit In" the HDR option is greyed out. If I try to just process a photo in CS 5 I get a message that "This version of Lightroom may require the Photoshop Cam
-
Gui-Session canceld after sending E-Mail
Hello together, after client installation of Windows 7 - 64 bit and SAP Gui 7:30 PL7 occurred in a small number of SAP users following error. SAP Gui session is sporadically shot down by sending an e-mail from Outlook 2003. All registered Sap applica