TA26054 Hi! I'd like to replace the fuse ,wether ceramic or not on this PSU wich is Ac Bel api-9841-291

Hi ! I would like to change the power supply for atx or other brand and looking for some info that would simplify an overdue research that led to little info, ie links would not result in opening correct window , example : http://http://forums.macrumors.com/showthread.php?t=261623 at #10 pres leads to tiger direct home page, last resort would be to change the fuse and again link to no avail https://discussions.apple.com/message/9052148?messageID=9052148#9052148?messageI D=9052148http:// because probably ceramic fuse in this Ac Bel api-9841-291 power supply. Any suggestions that leads to fix is appreciated and already did change psu last year , around same time for same psu so maybe a better fuse or atx altogether.Thanks Yal

ATX to G4 Sawtooth PSU conversion isn't hard.
I made an adapter documented here:
http://www.jcsenterprises.com/Japamacs_Page/Blog/EA215F16-F592-4CF7-AA8A-496D532 3F6BC.html

Similar Messages

My MACBOOK Pro turned out to be Snow Leopard, and later upgraded to LION. And update the EFI, I would like to replace the Snow Leopard, EFI can not boot, how do? How to use the Snow Leopard install disk to reduce EFI?

My MACBOOK Pro turned out to be Snow Leopard, and later upgraded toLION. And update the EFI, I would like to replace the Snow Leopard, EFIcan not boot, how do? How to use the Snow Leopard install disk to reduce EFI?

Do you mean some of your software does not work in Lion? Do you want to return to using Snow Leopard? If so, then do this:
Downgrade Lion to Snow Leopard
1. Boot from your Snow Leopard Installer Disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu.
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing. SMART info will not be reported on external drives. Otherwise, click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the partition scheme to GUID then click on the OK button. Click on the Partition button and wait until the process has completed.
4. Quit DU and return to the installer. Install Snow Leopard.
This will erase the whole drive so be sure to backup your files if you don't have a backup already. If you have performed a TM backup using Lion be aware that you cannot restore from that backup in Snow Leopard (see below.) I suggest you make a separate backup using Carbon Copy Cloner 3.4.1.
If you have Snow Leopard Time Machine backups, do a full system restore per #14 in Time Machine - Frequently Asked Questions. If you have subsequent backups from Lion, you can restore newer items selectively, via the "Star Wars" display, per #15 there, but be careful; some Snow Leopard apps may not work with the Lion files.

I would like to replace the hard drive cable for a 13" mid 2010 macbook pro. What is the right model of the hard drive cable?

i would like to replace the hard drive cable for a 13" mid 2010 macbook pro. What is the right model of the hard drive cable?

https://www.ifixit.com/Store/Parts/MacBook-Pro-13-Inch-Unibody-Model-A1278-Mid-2 009-Mid-2010-Hard-Drive-Cable/IF163-013-1
Apple Part #: 922-9062, 821-0814-A

I'd like to replace the background graphic on the "home page" of the new iPad I got today. How do I do that? TIA

I'd like to replace the background graphic on the "home page" of the new iPad I got today. How do I do that? TIA

Thanks. I did as you instructed and it worked great, Thanks very much! -=Grant=-

Is reinstalling Photoshop CS6 still OK? My #1 machine is bogging down in Bridge, and I would like to replace the old klunker on #2

Is reinstalling Photoshop CS6 still OK? My #1 machine is bogging down in Bridge, and I would like to replace the old klunker on #2

Larryt48503521 you are welcome to install Photoshop CS6 on a new computer. You can find details regarding the activation process at Activation & deactivation help - http://helpx.adobe.com/x-productkb/policy-pricing/activation-deactivation-products.html.

How we can replace the column in Core Table plz see this msg

Hi,
How we can replace the column in Core Table plz see this msg
Req:
when i push the Insert button the data inserted into the Table
like
Cols Values
FOCD      CUFZ14
PRDCD FU6
Month 082008
AgencyCD AG02
PLAN 123
This is FO_Plan Table....
Requirement:
i need at table show to replace the Prd_CD to Prd_Desc while inserting the above Row....
There is no Prd_Desc in FO Plan Table....
Prd_desc comes from Product Table.
did u get my point...
how to solve.
Thanks
Ram
Edited by: Ram Vungarala on Sep 24, 2008 9:09 AM
Edited by: Ram Vungarala on Sep 24, 2008 9:15 AM

Hi,
I'm not sure if I understood what are you trying to do. But you can modify your table in a backing bean code. JSF page code for a table:
<af:table id="product_search_results_tbl" binding="#{backingBean.boundTable}" ... />
And a backing bean code:
import oracle.adf.view.faces.component.core.data.CoreTable;
public class YourBackingBean {
    private CoreTable boundTable;
    public void setBoundTable(CoreTable boundTable) {
        this.boundTable = boundTable;
    public CoreTable getBoundTable() {
        return boundTable;
   public String insertButtonAction() {
      // Bind your button action to this method and modify here your bound table
     return null;
{code}
Look for column modification methods in a CoreTable class documentation.
Marius

I just bought an ipad 2, it has not arrived but i would like to cancel the order because that was not the one I wanted. Do I get my money back if I make a return?

I just bought an ipad 2, it has not arrived but i would like to cancel the order because that was not the one I wanted. Do I get my money back if I make a return?

You will need to talk to Apple, they would be the only ones who can tell you. We are just a user to user forum here.

Hi i am getting an error like this while installing Live Cycle Server " The file merge_modules\lc11_common_iam_zip does not exist This file is required sucessfullly run the Live Cycle Installer.Can any one help me on resolving this issue it would be of g

Hi i am getting an error like this while installing Live Cycle Server " The file merge_modules\lc11_common_iam_zip does not exist This file is required sucessfullly run the Live Cycle Installer.Can any one help me on resolving this issue it would be of great help..thanks .

I think in your situation it would be worth trying the things listed under the event. It does have to do with FRS and it's easy to do. I've used it to fix journal errors after a server unexpectedly restarts and sysvol stops replicating. I
could see where it could fix your issue, and if it doesn't, you're out 5 minutes. :)
The listed registry key does not exist
Expand HKEY_LOCAL_MACHINE.
Click down the key path:
"System\CurrentControlSet\Services\NtFrs\Parameters"
Double click on the value name
"Enable Journal Wrap Automatic Restore"

Is there anyway to find a new font on Pages for iPad? The letters are hard like a rock when you use foreign languages like Thai. The fonts on device do not support foreign language.

Is there anyway to find a new font on Pages for iPad? The letters are hard like a rock when you use foreign languages like Thai. The fonts on device do not support foreign language.

varat_pond wrote:
Anyone in Apple if you see this message
These are user to user help forums. To tell Apple you want more fonts for Thai, go here:
http://www.apple.com/feedback/ipad.html
But I suspect this is likely one of those things for which you will always have to use a full computer rather than a iPad.

My Mac Pro will not power on. I've replaced the power supply, still will not power on. Is there anyone with a solution?

My Mac Pro will not power on. I've replaced the power supply, still will not power on.
Is there anyone with a solution?

Try a pram reset:
http://support.apple.com/kb/HT1379

Hp the system recovery media does not support this computer, WIN7 GS72 Notebook

HProduct: GS-B66US (17" I3 notebook)
OS: Win7
Bios Rev: F.47
Error message: "hp the system recovery media does not support this computer. You are not able to restore this system"
Changes made to system: Updated bios (I think).
Getting error messages (at system boot, as windows start, and from the intel hard drive controller) warning me to backup data and hard drive my fail.
I replaced the harddrive and inserted the first of my 4 recovery DVDs (created before I updated the bios). After booting from the first recovery disk I get the following message
"hp the system recovery media does not support this computer. You are not able to restore this system with the media"
The computer still boots with the old hard drive (with drive failure imminent messages) I do see support assistant offering another bios update but I did not install it with the hard drive problem
PLEASE HELP
TIA

Hi,
I think there could be two possible reason. wrong media or systemboard is changed.
did you create any recovery media yourself or you ordered the recovery media from hp? also, was there any systemboard replacement done before?
media created on some other computer (same model) may not work on your computer.
you can order the media from hp.com here.
http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&docname=c00810334
also once systemboard is replaced you need to get the configuration settings done for BIOS(only HP can do it).
hope it helps
Regards,
WW
“I am an HP Employee“
***** Click the KUDOS star on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem***

The Dreamweaver client version does not match this version of the BrowserLab client

Cannot use BrowserLab
I have followed the upgrade instructions on this page
http://labs.adobe.com/downloads/browserlab.html
Deleted the MeerMeerDW folder, downloaded and installed the latest MXP files.
But when I try to use BrowserLab from Dreamweaver after program loads error message says
"The Dreamweaver client version does not match this version of the BrowserLab client.
Please download and install the latest version of the Dreamweaver MXPs"
I have tried several times, even tried removing the extensions from Extension Manager, quiting the program,
deleting the MeerMeerDW folder, restarting Extension Manager and reinstalling the MXPs, then starting Dreamweaver
and trying the Preview in Browser>Adobe BrowserLab. Same problem, program loads and then get error message.
Macintosh OS 10.5.8
Dreamweaver CS4
Extension Manager CS4 (2.1.115)

Hello toni7,
I'm sorry to hear you're having problems. Are you prompted to replace the existing extensions when performing the installation? The error message you are receiving when using the service is expected if the new versions of the extensions are not installed.
What is the version number of the extensions displayed in Extension Manager?
Are you deleting the MeerMeerDW folder in the user library prior to installing the new version of the extensions? And just to be sure, are you logged in as the same user? [(user)\Library\Application Support\Adobe\CS4ServiceManager\extensions\MeerMeerDW]
Do you have more than one MeerMeerDW folder at the path above?
Also, be sure that all adobe applications are closed before trying to install the new extensions. I would also make sure that CS4ServiceManager, Extension Manager and Dreamweaver are not running when you delete the MeerMeerDW folder and prior to installing the updated extensions. Go to Applications\Utilities\Activity Monitor and Quit Process on any of those three running prior to installing.
It's critical that the MeerMeerDW folder is manually deleted, rather than removed using Extension Manager before updating the extensions.
Best regards,
Corey

I am batch processing in PS 2014 (watermark and saving as jpeg from ps file). I get the message for some but not all 'this file needs to be saved as a copy with this option'. And then I have to save it manually. Does anyone know why this happens? (It is j

I am batch processing in PS 2014 (watermark and saving as jpeg from ps file). I get the message for some but not all 'this file needs to be saved as a copy with this option'. And then I have to save it manually. Does anyone know why this happens? (It is just a plain photoshop file, a watermark is added, then save as jpeg - the jpeg is saved to a different folder than the original photoshop file.) It happens for about 10 of 30/40 files approximately . Thank you, Kathryn

I believe I have figured it out - I need to flatten the image, even though there are no layers except for layer 0, first.

HELLO, i wand do make an update " camera Raw" with the adobe installer - it was not possible - this was the massage -Photoshop Camera Raw 6.7-Update Installation fehlgeschlagen Fehlercode: U44M1P7

HELLO, i wand do make an update " camera Raw" with the adobe installer - it was not possible - this was the massage -Photoshop Camera Raw 6.7-Update Installation fehlgeschlagen Fehlercode: U44M1P7

You need to buy PSE13. But you can continue with PSE9 if you download and install the free DNG converter to convert your CR2 files to the Adobe universal Raw format and the DNG files will work with yoir existing software(keep your originals as backups and for use in the camera manufactures software)
Windows download (.exe file) click here DNG Converter 8.8
Mac download (.dmg file) click here DNG Converter 8.8
You can convert a whole folder of raw images in one click. See this quick video tutorial:
You Tube click here for DNG Converter tutorial

I get unexpectedly logged out from my mail box and and recieve the following message: "The custom error module does not recognize this error."

I am repeatedly and unexpectedly logged-out from my mail box when working on a document. It frequently happens when I choose Send or Save, but it could happen any time. The file that I worked on disappears completely. Before, the file could be found in the draft box or some other place categorized as Auto Recovery. Now, instead, I get the following message: "The custom error module does not recognize this error." I am working at home, connected to a university server. The same problem appears with both of my computers, which are connected by a router. I have a MacBook Pro and am working with Firefox 6.0.2. I have a wireless broadband connection with Internet. AirPort is connected to Lindstrom and has IP address 192.168.0.198. Router: D-Link Model DIR-635. Modem: ZyXEL Model No. 660H D Triple Play Modem.
Best wishes,
Lars Lindström, Professor
<[email protected]>

Hi Phil,
Generally, when a user sends an incoming request to an Exchange 2010 Client Access server using Outlook Web App and the user’s mailbox is on an Exchange 2010 mailbox in a different Active Directory site,
Exchange 2010 determines whether the Client Access server has the
ExternalURL property set in that Active Directory site. If it is and the cross-site silent redirection has been enabled, the user will be automatically redirected to the specified URL.
Thus, please make sure the External URL property is set properly in your environment. And also
disable the WindowsAuthentication for OWA VD to have a try. If the issue persists, please try the following KB to reset the Outlook Web Access-related virtual directories:
http://support.microsoft.com/kb/941201
Thanks,
Winnie Liang
TechNet Community Support
Sorry for the late reply. Yes, the ExternalURL is set; otherwise, it wouldn't work at all. 98% of the time everything is fine.
My issue described a problem that appears only during session timeouts. I've pretty much verified that this is the case; Exchange 2010 does not appropriately handle the timeouts sometimes when using cross-site redirection.

TA26054 Hi! I'd like to replace the fuse ,wether ceramic or not on this PSU wich is Ac Bel api-9841-291

Similar Messages

Maybe you are looking for