TA38606 How to cut the call when phone is locked

How can I actually disconnect or cut the call when my Iphone is locked. I am using iPhone4 5X IOS.
Regards
Syed

when you on the call just press the on/off button if your phone is locked and remain to be locked after call

Similar Messages

How to declined the call when the screen is locked on io7?

Guys I tried to cancel the call while the phone is ringing it doesn't display an option while the screen is Locked however there declined option when it's unlocked
Any idea how to declined the call while the screen is locked

Thank you all but This is not the default of the previous operating systems like iOS 5 and io6 so why apple didn't set an option to decline the call as normal instead pressing on the power button in each call

How to reject a Call when i phone's screen is off ??

How to reject a Call when i phone's screen is off ??

notyou wrote:
The 7.1 update now includes this functionality on the lock screen.
Never mind. I am incorrect. Sorry.

I have iPhone 5s. After updating to 8.0.2 , it freezes often when i cut the call... happened 7 times ... had to switch off every time .... what to do?????? help....

I have iPhone 5s. After updating to 8.0.2 , it freezes often when i cut the call... happened 7 times ... had to switch off every time .... what to do?????? help....

Hi there SraZamora,
The troubouleshooting steps in the article below can be helpful when troubleshooting unresponsive devices.
iOS: Not responding or does not turn on
-Griff W.

I have read all of the discussions about headset echos, my echos are heard by the caller when i hold the phone by the bottom half. The echo disappears when I change my hold position. Anybody else having this problem? Fix?

I have read all of the discussions about headset echos, my echos are heard by the caller when I hold the phone by the bottom half. The echo disappears when I change my hold position. Anybody else having this problem? Fix?

Don't hold it like that. You're creating an 'echo chamber' due to the position of your hand/neck/face. It's not a technical issue. I hear this when I talk to my wife and she cradles the phone against her shoulder.

In lock screen how to reject the call??

in lock screen how to reject the call??

iPhone, iOS 7.02
What's the reason why the screen can't show the same touch screen buttons in locked as in unlocked mode?
When I lock the phone I expect the phone to be locked with chance only to answer or reject an incoming call.
Often when not beeing able to accept a call is when one is in a situation where you can't answer and the rejection, as well as answering of course, shall be very easy to do.
OK for the dubbelclick on the lock button but how to find that little button when stressed and can't answer?
This was better in IOS6!

How to register the recipient when create job by function

I am now use JOB_OPEN , JOB_SUBMIT and JOB_CLOSE to create a job in the program. And need to post the result of the report to the person by email.
Can you tell me how to register the recipient when create the job.
( in sm36, it is easily to do but how to do in coding? )
regards,
slam

Hi
I think in Back ground using the above fun modules you can't send a mail to the receipient.
see the use of the above fun modules;
IF p_bjob = 'X'.
    CONCATENATE sy-cprog sy-datum sy-uzeit
                INTO jobname SEPARATED BY '_'.
    CALL FUNCTION 'JOB_OPEN'
      EXPORTING
        jobname          = jobname
      IMPORTING
        jobcount         = jobcount
      EXCEPTIONS
        cant_create_job = 1
        invalid_job_data = 2
        jobname_missing = 3
        OTHERS           = 4.
    CALL FUNCTION 'GET_PRINT_PARAMETERS'
      IMPORTING
        out_archive_parameters = arc_params
        out_parameters         = print_params
        valid                  = valid
      EXCEPTIONS
        archive_info_not_found = 1
        invalid_print_params   = 2
        invalid_archive_params = 3
        OTHERS                 = 4.
    IF valid = chk.
      SUBMIT ybrep
                      WITH < sel Screen>
                      AND RETURN
                      USER               sy-uname
                      VIA JOB            jobname
                      NUMBER             jobcount
                      TO SAP-SPOOL
                      SPOOL PARAMETERS   print_params
                      ARCHIVE PARAMETERS arc_params
                      WITHOUT SPOOL DYNPRO.
      CALL FUNCTION 'JOB_CLOSE'
        EXPORTING
          jobcount             = jobcount
          jobname              = jobname
          strtimmed            = 'X'
        EXCEPTIONS
          cant_start_immediate = 1
          invalid_startdate    = 2
          jobname_missing      = 3
          job_close_failed     = 4
          job_nosteps          = 5
          job_notex            = 6
          lock_failed          = 7
          invalid_target       = 8
          OTHERS               = 9.
      IF sy-subrc <> 0.
       MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
               WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
      ELSE.
        MESSAGE i029 WITH jobname.
      ENDIF.
    ELSE.
      MESSAGE s000 WITH text-003.
      STOP.
    ENDIF.
ENDIF.
Reward points if useful
Regards
Anji

How to stop the call summary display on home screen?

How to stop the call summary display on home screen?

Here are the solutions I can think of (if no one here responds with something better):
1. Open Settings and then Phone within the Settings screen and see if you can find a setting there for the call summary. The Phone submenu under Settings would be the most likely place.
2. Open Settings on your iPhone and go through each item including all of the items within each main item. Within about 10 minutes you should be able to get through all of the settings and find the setting if it exists on your phone. There is no such setting on my phone but it is possible that Airtel has a custom menu with that.
3. If you still haven't found it, you could check a) Airtel's support site and/or b) an Airtel specific forum.
4. If still no luck, I would call Airtel and ask again and if you get the same response ask for the location of the setting (or to speak to someone who can tell you).
Good luck.

How to reject the calls to iphone?

How to reject the calls to iphone?

Whel you can tap the On/OFF button to decline and if you press twice it goes to the voice mail.
Other option is only available if you have the phone unlocked it says reject

How to get the tab when is it pressed?

I have the following situation:
I have an array of JTextField inside a scroollpane. The size of my array is nine or ten depends on some rules. But my window show just four JTextField. So I would like to know how to get the event when I press "tab", just to show the others JTextField while I'm pressing "tab". Because I need this event to scrooll down or scrooll up.
I tried the keylistener, but when I press "tab" any method(keypressed, keyreleased, keytyped) is called.
I also tried the focuslistener. If this event I could scrooll down or scrooll up, but I couldn't do both!!
Can somebody help me??
Thanks anyway!!
Gin

JTextField implements Scrollable interface, which provides information to the enclosing container such as JScrollPane.
Hence when the tab event is fired, you can compute the Rectangle area that should be visible and then call the 'scrollRectToVisible()' method in JTextField. This will inform the JScrollPane to scroll to the rectangle that you mention.
HTH

How can i record call when i use handfree

How can i record call when i use handfree

Define hands-free, are you using a headset/Bluetooth?
To note, Recording is not a natively supported function of the iPhone. There are laws regarding this... and in America, both parties have to be notified/in-knowledge of being recorded.
Where are you from? If outside the USA, Google Voice won't work.
Have you looked into a VoIP provider that supports what you wish to do?

How to recover my pictures when phone went into recovery mode?

how to recover my pictures when phone went into recovery mode?

Perhaps you've been transferring them from your iOS device to your computer regularly, as recommended for any electronic image capture device?
If not, then learn from this hard life lesson, and backup the data that is important to you... regularly.

How to reload the screen when changing languages in JavaFX 2?

I'm beginner with javaFX and i need to change language of the screen. but i have no idea how to reload the screen when the language was changed. The application have a button where have the language available. I want just refresh screen when the user change language.
Here is the start method to show the stage.
    @Override
    public void start(Stage stage) throws Exception
        this.stage = stage;
        Locale locale = Locale.getDefault();
        ResourceBundle rb = ResourceBundle.getBundle("resources/Label",locale);
        loader = new FXMLLoader(getClass().getResource("FXMLDocument.fxml"),rb);
        root = (Parent)loader.load();
        FXMLDocumentController controller = (FXMLDocumentController) loader.getController();
        controller.setMain(this);
        scene = new Scene(root);
        stage.setScene(scene);
        stage.show();
here is the function to change the language(in the same class with start function),the rb is the new ResourceBundle:
    public void refresh(ResourceBundle rb)
          //change the language here
1. I don't want to use the resourceBundle to get value in resource file and set label in scene one by one.like following:
this.btnLabel.setText(rb.getString(key.test));
2. I don't want to reload the scene,like following:
    public void refresh(ResourceBundle rb)
         try
            loader = new FXMLLoader(getClass().getResource("FXMLDocument.fxml"),rb);
            root = (Parent)loader.load();
            scene.setRoot(root);
            FXMLDocumentController controller = (FXMLDocumentController) loader.getController();
            controller.setMain(this);
        catch(Exception err)
            err.printStackTrace();
So do we have a solution to just set the resourceBundle and reload the scene easier?
Thanks and best regards!

Your option 2 (reload the FXML for the scene using the new resource bundle as a parameter), is the way this would normally be done and what I would recommend.
Failing that, you could use option 1 of individually resetting the label text of labeled items (I don't really recommend this).
Why don't you want to use option 2?
Perhaps it is because there is some internal state of the UI which differs from the initial state when the the UI is first loaded (e.g. user has typed text in a text field and you want to preserve that). If that's the case you will need to either go with your option 1 of individually resetting the label text of labeled items, or implement something which preserves the UI state and user data by saving it in memory or to disk, reloading the UI via the FXMLLoader (essentially your option 2), then restoring the UI state and user data to what it was before the language change. Preserving and restoring the modified state seems complicated to me if you have a lot of state, so I wouldn't really advise this approach unless you really needed it.

How can I watch movies in germany with native tone, english? Any one knows how to switch the language when renting a movie?

How can I watch movies in germany with native tone, english? Any one knows how to switch the language when renting a movie?

I wonder the Format Tables macros on my site could be adapted?
http://www.grainge.org/pages/authoring/word/word_macros.htm
If not, I have used Macro Express to format tables in Rh. No reason it could not be used in Word.
See www.grainge.org for RoboHelp and Authoring tips
@petergrainge

How to solve the problem when opening program illustrator cs6 ERROR: 16 It is WINDOWS 8.1 / 64 BIT help please

how to solve the problem when opening program illustrator cs6
ERROR: 16
It is WINDOWS 8.1 / 64 BIT
help please

Thanks, Jeff! The file Adobe Setup Error.log contains the following information:
02/14/14 07:20:26:474 | [INFO] | | OOBE | DE | | | | 8860 | DEVersion: 5.0.0.0
02/14/14 07:20:26:475 | [INFO] | | OOBE | DE | | | | 8860 | Loading library from C:\Program Files (x86)\Common Files\Adobe\OOBE\PDApp\DECore\DE5\Setup.dll
[    8860] Fri Feb 14 07:20:26 2014 INFO
::START TIMER:: [Total Timer]
CHECK: Single instance running
CHECK : Credentials
Load Deployment File
CHECK : Another Native OS installer already running
Create Required Folders
Assuming uninstall mode
Lookup for master payload
[    8860] Fri Feb 14 07:20:26 2014 ERROR
DW040: The product "{893B3B44-0A1E-404B-8FE8-0A74509102A9}" is not installed. Cannot proceed with the uninstall
[    8860] Fri Feb 14 07:20:26 2014 INFO
:: END TIMER :: [Total Timer] took 6.90443 milliseconds (0.00690443 seconds) DTR = 579.338 KBPS (0.56576 MBPS)
-------------------------------------- Summary --------------------------------------
- 0 fatal error(s), 1 error(s), 0 warning(s)
ERROR: DW040: The product "{893B3B44-0A1E-404B-8FE8-0A74509102A9}" is not installed. Cannot proceed with the uninstall
Please search the above error/warning string(s) to find when the error occurred.
These errors resulted in installer Exit Code mentioned below.
Exit Code: 33 - The product is not installed, cannot uninstall.
Please see specific errors and warnings for troubleshooting. For example, ERROR: DW040 ...

TA38606 How to cut the call when phone is locked

Similar Messages

Maybe you are looking for