TA38607 how do i deactivate call waiting while i could not find the call waiting in the Phone folder

how do i deactivate call waiting while i could not find the call waiting in the Phone folder

If you have a CDMA phone, there is no way to deactivate Call Waiting from the phone. You'll need to contact your carrier.

Similar Messages

RFC call failed: JCO.Server could not find server function 'SET_SLD_DATA'

Hi, All
the system is PI 7.0 EHP1 oraclei Win2003 server, I configured SLD but I run RZ70, having error "RFC call failed: JCO.Server could not find server function 'SET_SLD_DATA' ". I know there are lot of tread about this error, but none of themsolve my problem. all JCO, RFC connections and SDL DATA supplier(VA) seem OK. error message in SM21 is "Could not send SLD data"
detail from SM21
The system could not send the data that has been collected automatical
for the System Landscape Directory (SLD). Check whether the gateway
configured in transaction RZ70 has been started and whether the SLD
bridge has been registered with this gateway.
You can use transaction SM59 to check this in the sending system for t
implemented RFC destinations. The RFC destinations have the standard
names "SLD_UC" for Unicode sending systems and "SLD_NUC" for non-Unico
sending systems. If a different RFC destination has been entered in
RZ70, check this destination instead.
You can use the Gateway Monitor to check the target gateways. In ABAP
systems, this monitor is started with transaction SMGW, or you can use
the external SAP program "gwmon". Check whether the specified gateway
has an active registration.
OF COURSE I checked RFC of SLD_UC and SMGW
any different ideas
Regards
ABH

Hi
Please check the following notes are implemented
Note 906454
Note 907729
You may be aware but if you are not --->RZ70 creates the required SLD* RFCs during runtime - therefore if you have defined these RFCs manually first using the same namespace you can get RFC conflicts which result in a failed submission
Please also check the user in the RFC is known to both systems and has required authorization to write to SLD
Generally with SLD you have to install or select a suitable gateway to handle incoming data supply traffic
Also the gateway you are using has be known to SLD and reflected in RZ70 - i.e these defintions have to be the same
It is also recommended to delete all references to SLD_* RFCs in data supplier and target SLD
after a failed submission attempt to allow RZ70 to recreate these consistently once the above has been checked
Best wishes
Stuart

How do you access "trouble shoot" for mail. My AOL account is set up on the mail icon but it some how defaulted to another Wi fi account and could not receive email. We reset the the Wifi but somehow didn't complete the process.

How do you access "trouble shoot" for mail. Our AOL account is set up on the mail icon but somehow it defaulted onto another nearby Wifi account while everything else that was running stayed on our router. We were unable to receive email on the AOL account and were directed to trouble shoot. We reset the Wifi account but somehow didn't save it correctly. Now we cannot get back in to reset it again. Direction??

Hello
I don't really understand your question. The Mail application cannot independently access a different wifi network from the one your computer is using.
Are you trying to troubleshoot your wifi (ie, you can't get into your own wireless network), or the Mail program (you can't get email)? Are there any error messages you see when you try to do one or the other?
Matt

I get a dialogue box [JavaScript Application] "Could not find a Authenticate Response in the result". Why, and how can I get rid of it?

This occurs whenever I launch Firefox, and needs to be closed before proceeding.

I'm having the exact same issue. I'm connected to the VPN, but I can't mount or otherwise connect to the shared drive. Did you ever resolve this?

After installing ios6 I now have app downloads stuck in waiting mode. I went to down in App Store but could not find a way to disable them. How can I do this. I never had this problem on ios5. I'm using an iPad 3

After installing ios6 I now have app downloads stuck in waiting mode. I went to downloads in App Store but could not find a way to disable them. How can I do this. I never had this problem on ios5. I'm using an iPad 3

Try downloading in iTune (computer) and sync to iPad.

How can I download free apps while I have already given a card number at the past which is ineffective?

how can I download free apps while I have already given a card number at the past which is ineffective?

Create an iTunes App Store account without a credit card
Any way to get free apps on the App Store without a credit card?

11.5.10.2 to R12.1.1 upgrade: Error loading seed data for GL_DEFAS_ACCESS_SETS: DEFINITION_ACCESS_SET = SUPER_USER_DEFAS, ORA-06508: PL/SQL: could not find program unit being called

Hello,
EBS version : 11.5.10.2
DB version : 11.2.0.3
OS version : AIX 6.1
As a part of 11.5.10.2 to R12.1.1 upgrade, while applying merged 12.1.1 upgrade driver(u6678700.drv), we got below error :
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
ATTENTION: All workers either have failed or are waiting:
           FAILED: file glsupdas.ldt on worker 3.
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
drix10:/fmstop/r12apps/apps/apps_st/appl/admin/FMSTEST/log>tail -20 adwork003.log
Restarting job that failed and was fixed.
Time when worker restarted job: Wed Aug 07 2013 10:36:14
Loading data using FNDLOAD function.
FNDLOAD APPS/***** 0 Y UPLOAD @SQLGL:patch/115/import/glnlsdas.lct @SQLGL:patch/115/import/US/glsupdas.ldt -
Connecting to APPS......Connected successfully.
Calling FNDLOAD function.
Returned from FNDLOAD function.
Log file: /fmstop/r12apps/apps/apps_st/appl/admin/FMSTEST/log/US_glsupdas_ldt.log
Error calling FNDLOAD function.
Time when worker failed: Wed Aug 07 2013 10:36:14
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
drix10:/fmstop/r12apps/apps/apps_st/appl/admin/FMSTEST/log>tail -20 US_glsupdas_ldt.log
Current system time is Wed Aug 7 10:36:14 2013
Uploading from the data file /fmstop/r12apps/apps/apps_st/appl/gl/12.0.0/patch/115/import/US/glsupdas.ldt
Altering database NLS_LANGUAGE environment to AMERICAN
Dumping from LCT/LDT files (/fmstop/r12apps/apps/apps_st/appl/gl/12.0.0/patch/115/import/glnlsdas.lct(120.0), /fmstop/r12apps/apps/apps_st/appl/gl/12.0.0/patch/115/import/US/glsupdas.ldt) to staging tables
Dumping LCT file /fmstop/r12apps/apps/apps_st/appl/gl/12.0.0/patch/115/import/glnlsdas.lct(120.0) into FND_SEED_STAGE_CONFIG
Dumping LDT file /fmstop/r12apps/apps/apps_st/appl/gl/12.0.0/patch/115/import/US/glsupdas.ldt into FND_SEED_STAGE_ENTITY
Dumped the batch (GL_DEFAS_ACCESS_SETS SUPER_USER_DEFAS , GL_DEFAS_ACCESS_SETS SUPER_USER_DEFAS ) into FND_SEED_STAGE_ENTITY
Uploading from staging tables
Error loading seed data for GL_DEFAS_ACCESS_SETS: DEFINITION_ACCESS_SET = SUPER_USER_DEFAS, ORA-06508: PL/SQL: could not find program unit being called
Concurrent request completed
Current system time is Wed Aug 7 10:36:14 2013
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++

Below is info about file versions and INVALID packages related to GL.
PACKAGE BODY GL_DEFAS_ACCESS_SETS_PKG is invalid with error component 'GL_DEFAS_DBNAME_S' must be declared.
I can see GL_DEFAS_DBNAME_S is a VALID sequence accessible by apps user with or without specifying GL as owner.
SQL> select text from dba_source where name in ('GL_DEFAS_ACCESS_DETAILS_PKG','GL_DEFAS_ACCESS_SETS_PKG') and line=2;
TEXT
/* $Header: glistdds.pls 120.4 2005/05/05 01:23:16 kvora ship $ */
/* $Header: glistddb.pls 120.16 2006/04/10 21:28:48 cma ship $ */
/* $Header: glistdas.pls 120.4 2005/05/05 01:23:02 kvora ship $ */
/* $Header: glistdab.pls 120.5 2006/03/13 19:56:21 cma ship $ */
SQL> select * from all_objects where object_name in ('GL_DEFAS_ACCESS_DETAILS_PKG','GL_DEFAS_ACCESS_SETS_PKG')
2 ; OWNER OBJECT_NAME SUBOBJECT_NAM OBJECT_ID DATA_OBJECT_ID OBJECT_TYPE CREATED LAST_DDL_TIME TIMESTAMP STATUS T G S NAMESPACE
EDITION_NAME
APPS GL_DEFAS_ACCESS_DETAILS_PKG 1118545 PACKAGE 05-AUG-13 05-AUG-13 2013-08-05:18:54:51 VALID N N N 1
APPS GL_DEFAS_ACCESS_SETS_PKG 1118548 PACKAGE 05-AUG-13 06-AUG-13 2013-08-05:18:54:51 VALID N N N 1
APPS GL_DEFAS_ACCESS_SETS_PKG 1128507 PACKAGE BODY 05-AUG-13 06-AUG-13 2013-08-06:12:56:50 INVALID N N N 2
APPS GL_DEFAS_ACCESS_DETAILS_PKG 1128508 PACKAGE BODY 05-AUG-13 05-AUG-13 2013-08-05:19:43:51 VALID N N N 2
SQL> select * from all_objects where object_name='GL_DEFAS_DBNAME_S'; OWNER OBJECT_NAME SUBOBJECT_NAM OBJECT_ID DATA_OBJECT_ID OBJECT_TYPE CREATED LAST_DDL_TIME TIMESTAMP STATUS T G S NAMESPACE
EDITION_NAME
GL GL_DEFAS_DBNAME_S 1087285 SEQUENCE 05-AUG-13 05-AUG-13 2013-08-05:17:34:43 VALIDN N N 1
APPS GL_DEFAS_DBNAME_S 1087299 SYNONYM 05-AUG-13 05-AUG-13 2013-08-05:17:34:43 VALIDN N N 1
SQL> conn apps/apps
Connected.
SQL> SELECT OWNER, OBJECT_NAME, OBJECT_TYPE, STATUS
FROM DBA_OBJECTS
WHERE OBJECT_NAME = 'GL_DEFAS_ACCESS_SETS_PKG'; 2 3 OWNER OBJECT_NAME OBJECT_TYPE STATUS
APPS GL_DEFAS_ACCESS_SETS_PKG PACKAGE VALID
APPS GL_DEFAS_ACCESS_SETS_PKG PACKAGE BODY INVALID SQL> ALTER PACKAGE GL_DEFAS_ACCESS_SETS_PKG COMPILE; Warning: Package altered with compilation errors. SQL> show error
No errors.
SQL> ALTER PACKAGE GL_DEFAS_ACCESS_SETS_PKG COMPILE BODY; Warning: Package Body altered with compilation errors. SQL> show error
Errors for PACKAGE BODY GL_DEFAS_ACCESS_SETS_PKG: LINE/COL ERROR
39/17 PLS-00302: component 'GL_DEFAS_DBNAME_S' must be declared
drix10:/fmstop/r12apps/apps/apps_st/appl/gl/12.0.0/patch/115/odf>cat $GL_TOP/patch/115/sql/glistdab.pls|grep -n GL_DEFAS_DBNAME_S
68: SELECT GL.GL_DEFAS_DBNAME_S.NEXTVAL
81: fnd_message.set_token('SEQUENCE', 'GL_DEFAS_DBNAME_S');
SQL> show user
USER is "APPS"
SQL> SELECT GL.GL_DEFAS_DBNAME_S.NEXTVAL
FROM dual; 2                         -- with GL.
NEXTVAL
1002
SQL> SELECT GL_DEFAS_DBNAME_S.NEXTVAL from dual;               --without GL. or using synonym.
NEXTVAL
1003
drix10:/fmstop/r12apps/apps/apps_st/appl/gl/12.0.0/patch/115/odf>strings -a $GL_TOP/patch/115/sql/glistdab.pls|grep '$Header'
REM | $Header: glistdab.pls 120.5 2006/03/13 19:56:21 cma ship $ |
/* $Header: glistdab.pls 120.5 2006/03/13 19:56:21 cma ship $ */
drix10:/fmstop/r12apps/apps/apps_st/appl/gl/12.0.0/patch/115/odf>strings -a $GL_TOP/patch/115/sql/glistdas.pls |grep '$Header'
REM | $Header: glistdas.pls 120.4 2005/05/05 01:23:02 kvora ship $ |
/* $Header: glistdas.pls 120.4 2005/05/05 01:23:02 kvora ship $ */

Could not find program unit being called

We're facing a development problem, which while it isn't stopping us from working, but it's seriously slowing down our progress. It goes something like this ...
We have a ColdFusion interface to an Oracle PACKAGE, "package A". "Package A" invokes "package B", and "package B" invokes "package C". We're actively working on "package C", the last in the chain, and then testing those changes from the ColdFusion interface.
Everytime we run a CREATE OR REPLACE on "package C" (we've tried both compiling only the BODY, as well as the SPEC and the BODY), we get the following error from ColdFusion when we test from the interface:
ORA-06508 PL/SQL: Could not find the program unit being calledIf we wait a bit, everything starts working again. Note that while we are waiting, "package C" is not being recompiled. So it's functioning fine. Our best guess is that there something happening due the connection pooling process in place. Maybe ... if you're lucky enough to latch onto a new connection, then the error doesn't appear? But, if you connect to a session that was present when "package C" was recompiled, then you get the ORA-06508? These connections are using a JDBC driver.
I guess I expected to get the ORA-04061 error ("Existing state of the package has been discarded"), and that is coming up more rarely than the ORA-06508, but the "could not find the program unit" is just stopping our efforts until everything starts working again.
I found some suggestions online (http://www.orafaq.com/forum/t/14555/2/) which claim that the SHARED POOL should be flushed and that will help with this error, but I'm not sure I need to bring an A-bomb to a fist-fight. Plus, these PACKAGES aren't huge, so I'm not sure we're encountering the memory limits focused upon in those other posts:
package A: 1533 lines
package B: 1015 lines
package C: 1842 lines
Anyone have a suggestion for us to follow-up on? Like I said, we're not dead in the water, but this is getting pretty frustrating.
Thanks,
--=Chuck

I think the problem is related to the connection pooling. If you have 5 persistent sessions held open by the application server say C1, C2, ... C5 then if you have called the package from C1 , C2, and C3 then if the package is recompiled the session copy of the package variables and records no longer matches the package and an error is issued. But if the call is made from C4 or C5 it works since the work in storage areas are all initialized from the new version of the package.
In the old days (7.x, 8.0) I remember seeing a Package State has changed message but recently at least on AIX we see the Program Unit not found when this happens. We used to see this message only if we could not load the package into the shared pool due to memory issues.
Anyhow we bounce one of our Web based applications to avoid this program. That is the local customer has us stop the application, make the change, revalidate packages, and restart so they never see the error since with a large connection pool significant time can pass between the change and an error being encountered.
In theory you should just be able to reissue the package procedure call since the first call should have resulted in the work in storage being re-initialized.
HTH -- Mark D Powell --

Fatal Error: Could not find Feature AnalyticsLinks in sharepoint 2010 while migration from 2007 site using stsadm command

Fatal Error: Could not find Feature AnalyticsLinks in sharepoint 2010 while migration from 2007 site using stsadm command

Hi ,
Firstly, I need to verify the followings:
Whether you created a feature called AnalyticsLinks and activatated it at SharePoint 2007 site.
Whether you installed the feature at SharePoint 2010 site.
Please deactivate the feature AnalyticsLinks, then migrate SharePoint 2007 site to SharePoint 2010, compare the result.
Also , please check whether you have installed the feature AnalyticsLinks at your SharePoint 2010 site. If not, please install and activate it, compare the result.
Here are some similar posts for you to take a look at:
http://social.technet.microsoft.com/Forums/sharepoint/en-US/17b17bd3-126c-44d4-bd58-38dd613017a0/fatal-error-could-not-find-feature-reviewpublishingspd1055?forum=sharepointadminprevious
http://mrin17.wordpress.com/2009/09/15/fatalerror-could-not-find-feature-s2siteadmin-while-importing-sites-from-different-server-at-sharepoint/
I hope this helps.
Thanks,
Wendy
Wendy Li
TechNet Community Support

Everything on my macbook 5.1 was erased and then the person who erased it could not find start up disc to reinstall. i called apple and gave them the serial number and they sent me leopard os 10.5 which is what originally came with the computer. not work

i was given a macbook 5.1 by my mom, being nice, she erased everything on it, but then could not find the original start up disc. i called apple and had the serial number and said that leopard 10.5 was the operating system that orginally came with it, so i bought it. when i got it,i turned on computer, put in dvd, and immediately shut it off, then turned it back on while pressing letter c. (they told me to do this) i can hear the disc turning but alls i get is blank screen then it shuts down, and restarts. nothing ever shows up on the screen. did i get a wrong disc? should there be something different than just the mac os x leopard 10.5 to get this computer to work again?? thanks for your help!

It means what it says. The "computer person" formatted it wrongly/ unsuitably. it needs to be formatted again.
Error "Case-sensitive drives not supported" or similar install error | Mac OS
Mylenium

Error : ORA-06508: PL/SQL: could not find program unit being called

Hi
I got surprise issue while testing my Oracle code . Let me explain first the environment detail . Our appliaction built on
Java/J2EE(Weblogic) and backend is Oracle 11g re2 . While calling from java it call thru different user which have been provide
synonym and exectue option for corresponding procdure ,
I created on package EXTRACT_CUSTOMER_INFO_PK which will exract data to text file using UTL_FILE ( direcory , UTL_FILE grant is provided to DB user).
Now this package has been called from rp_execute_procedure_pr -- Here I is the code
CREATE OR REPLACE PROCEDURE RP_EXECUTE_PROCEDURE_PR
i_atlas_job_schedule_fk IN atlas_job_schedule.atlas_job_schedule_pk%TYPE,
i_job_id IN atlas_job.job_id%TYPE,
i_parm_value IN atlas_job_schedule.parm_value%TYPE,
o_status_code OUT NUMBER,
o_status_mesg OUT VARCHAR2
IS
-------Other old code which is not relevent for this issue ----
--------Other old code which is not relevent for this issue ----
----Below code I added ----
ELSIF l_job_id = 'CUST_EXTRACT' THEN
EXTRACT_CUSTOMER_INFO_PK.customer_report ( i_parm_value ,
o_status_code,
o_status_mesg ) ;
-- o_status_code := -99999999;
--o_status_mesg := 'PARTHA PARTHA PARTHAcess terminated!';
ELSE
o_status_code := -20300;
o_status_mesg := 'Job Id : ' || l_job_id || ' NOT found. Process terminated!';
END IF;
update_log_auto
ajs_rec.atlas_job_schedule_pk ,
'Processing End Time (GMT): '
EXCEPTION
WHEN eProcError THEN
o_status_code := SQLCODE;
o_status_mesg := SUBSTR(vMsg ||'-'||SQLERRM, 1, 200);
WHEN OTHERS THEN
o_status_code := -20300;
o_status_mesg := SUBSTR(SQLERRM, 1, 200);
update_log_auto
ajs_rec.atlas_job_schedule_pk ,
'Error : '||SQLERRM||' '
update_log_auto
ajs_rec.atlas_job_schedule_pk,
'Processing End Time (GMT): '
END RP_EXECUTE_PROCEDURE_PR;
Now It compiled sucesfully . And while I did SIT then RP_EXECUTE_PROCEDURE_PR run fine and extracted txt file . But while I called it from Java procedure It gives us error like
Error : ORA-06508: PL/SQL: could not find program unit being called 02-AUG-2012 13:16:51.
As I told RP_EXECUTE_PROCEDURE_PR old proc and used by other proc , So I first suspect issue is newly added code or may be some grant or synonym ( Although it should not be )
so I created public synony amd gave execute grant to my pkg to public .
But it repeat same error .
I did lot of R&D on my pkg but nothing happen . Finally I remane my new pkg RP_EXTRACT_CUSTOMER_INFO_PK and it works fine
I need to know what is the RCA for it . I donot think any dependecy issue as renaming pkg is working fine .
NB my DB user is iATLAS and Javauser is SUDEEP
Thanks in Advance
Debashis Mallick

First of all If i run the main procedure in like below in my Schema it is working fine
begin
-- Call the procedure
rp_execute_procedure_pr(i_atlas_job_schedule_fk => :i_atlas_job_schedule_fk,
i_job_id => :i_job_id,
i_parm_value => :i_parm_value,
o_status_code => :o_status_code,
o_status_mesg => :o_status_mesg);
end;
So thre is no question of parameter .... or Invalid state etc . If it is parameter or Invalid state issue it will give other error.
Here problem is not syntax issue .
let me give u more detail regards this issue
1.. All objects corresponding to procedure all Valid
2.. If I test on the proc on my schema like above code . It works fine
3.rp_execute_procedure_pr is a old procudere which called for differner report generartion based on parameter passing . Also as extract_customer_info_pk called with in rp_execute_procedure_pr So there is no question of synonym or privilage issue for new procedure.
4. Suprising thing is if I rename and recreate package like extract_customer_info_pk _1 or rp_extract_customer_info_pk . Which are exactly same as extract_customer_info_pk and replace those new one with extract_customer_info_pk then it work fine in my java application
I think I make it clear the issue
Edited by: debashisora on Aug 3, 2012 5:31 AM
Edited by: debashisora on Aug 3, 2012 5:40 AM

Error while crawling LOB contents in SP 2013:'Could not find default endpoint element that references contract in the ServiceModel client configuration section

Hi,
I created custom BDC Model using Visual Studio. In ReadList method i am getting data using Web Service call. Using this External Content Type (BDC Model) i created one external list and it is populating with data.
I created one new content source in search service application using this BDC Model and when crawled this content source i am getting the below error.
Error while crawling LOB contents. ( Error caused by exception: Microsoft.BusinessData.Runtime.RuntimeException MethodInstance with Name 'ReadList' on Entity (External Content Type) with Name 'Entity1' in Namespace 'bcsex.BdcModel1' failed
unexpectedly. The failure occurred in method 'ReadList' defined in class 'bcsex.BdcModel1.EntityService1' with the message 'Could not find default endpoint element that references contract 'ServiceReference1.Service1Soap' in the ServiceModel client configuration
section.
I included the bindings and client end point configuration settings in web.config file located at
\\Inetpub\wwwroot\wss\VirtualDirectories\Port_Number, but still getting the same error.
Please help. Thanks a lot.

The Issue resolved by including the bindings and client end point configuration settings in
machine.config file located at C:\Windows\Microsoft.NET\Framework64\v4.0.30319\Config\ and also restarted the server after config changes.

Error in executing mappings "could not find program unit being called"

I am trying to deploy a mapping from the control center in Oracle WareHouse Builder usign Oracle 11g . Here is what i exactly do , first I generate the mapping it goes okay with an insignificant warning .. After that I right click the mapping and click start (for exection to begin).. Eventually I get the error
STAGES_MAP
Error
ORA-04063: package body "ACME_DWH.STAGES_MAP" has errors
ORA-06508: PL/SQL: could not find program unit being called: "ACME_DWH.STAGES_MAP"
ORA-06512: at line 1
what does "could not find program unit being called" mean ?? I validated all my tables and its realated table and successfully deployed them ... but now the mappings is giving me trouble ??? Whas going on... I am confused.... Thansk....

ScoobySi wrote:
It sounds as though you've generated but haven't actually deployed the mapping to the DB? That error usually occurs when the package for the mapping is missing from the DB or the parameters have changed.
Ignore above, just read properly, as MccM suggests try to compile package on DB to determine error. If there are no errors, refresh control center or close it and reopen it as it may be trying to call package with old set of parameters.
Si
Edited by: ScoobySi on Nov 30, 2010 4:20 PMExactly , I generated the mappings and then in the control center right clicking on the mappings and consider (default- create new) i deploy it. It goes ahead but tells mer there is a warning , which i already know but chose to ignore. Then i right click on the mappings again and I select start unfortunately at this point this error comes up and my DB doesnt get populated :( ...
I am a bit new so could you kindly go step by step here , how can i compile my package on DB ??? Btw i am using toad to connect to oracle 11g , are u suggesting that using toad i should compile the package ?? if so how ?? hwo would i know the package location ??? as for the second method
"If there are no errors, refresh control center or close it and reopen it as it may be trying to call package with old set of parameters." I doubt it will work as i already tried it. I definitely think there is a problem with the package.. i dont think there is any other problemm... I would really appreciate your help thanks...

HT2486 want to know how to add pictures to address book that DO NOT appear as fullscreen images on the iPhone but remain as icons with the iPhone background visible

want to know how to add pictures to address book that DO NOT appear as fullscreen images on the iPhone but remain as icons with the iPhone background visible (see attached image). for some reason, all new contacts added through Mountain Lion appear as fullscreen caller ID images.

This would be better addressed in the iPhone forum, I would post there as well.

Getting the error " [java] Problem invoking WLST - java.lang.RuntimeException: Could not find the OffLine WLST class " while building the O2A 2.1.0 PIP

Getting the error " [java] Problem invoking WLST - java.lang.RuntimeException: Could not find the OffLine WLST class " while building the O2A 2.1.0 PIP. I am using the Design Studio 4.3.2 for building the O2A 2.1.0 PIP. Please let me know how to resolve this issue. Here I am enclosing the log file .

We have basically the same issue when we try to create the interpreter using the embedded method..
I was able to use the interpreter embedded in a java client as long as the weblogic jars were located in a weblogic install if I tried to use them from a maven repository no luck at all...
All of this worked easily in 9.2 now in 10.3 it seems more error prone and less documented.
I have seen close to a 100 posts on issues related to this so is there a document which outlines specifics....
We / I have used weblogic now for almost 10 years and moving from 8.1 to 9.2 was painful and we expected the move from 9.2 to 10.3 not to be soo bad but its proving to be as painful if not more painful than moving to 9.2. We seem to spend a good bit of our time working around issues in the next new release that were not in the previous one..
Any help would be appreciated I think we will open a support case but even that is more painful...
Any help would be greatly appreciated..
PS: We confirmed that all jars in the startweblogic classpath were in the startup. The server we have the embedded wlst instance is a managed server and we are using the component in a war... Are there any restrictions which we are unaware of.
Error we get is
1 [ERROR] com.tfn.autex.order.weblogic.QueueMaintenanceUtility.addQueue():217 Error Adding Queue wowsers JNDI Name wowsers Exception: Invocation Target exception while getting the WLSTOffLineScript path

TA38607 how do i deactivate call waiting while i could not find the call waiting in the Phone folder

Similar Messages

Maybe you are looking for