TA38675 it shows unknown

Hello! How r u my apple i phone 4s didnt show my phone num plz help me whats the prob..

Sounds like you need t orestore the iPad with iTunes: http://support.apple.com/kb/ht1414

Similar Messages

  • Has anyone upgraded the Ironport ESA to 8.5.6-074 and had the issues of Raid status showing unknown?

    Has anyone upgraded the Ironport ESA to 8.5.6-074 and had the issues of Raid status showing unknown? After we upgraded our appliances we are having issues with our ESA appliances showing the RAID status as unknown. When we reported the issue to CISCO we were updated there were no issues reported at all. Could anyone please confirm if you have experienced the same issue. 

    You should see OPTIMAL - meaning the drives in the C170 are in good health/status:
    myc680.local> version
    Current Version
    ===============
    UDI: C680 V FCH1611V0B2
    Name: C680
    Product: Cisco IronPort C680 Messaging Gateway(tm) Appliance
    Model: C680
    Version: 8.5.6-074
    Build Date: 2014-07-21
    Install Date: 2014-07-29 11:16:34
    Serial #: xxx-yyy1611Vzzz
    BIOS: C240M3.1.4.5.2.STBU
    RAID: 3.220.75-2196, 5.38.00_4.12.05.00_0x05180000
    RAID Status: Optimal
    RAID Type: 10
    BMC: 1.05
    There are times post-reboot, that you'll see and get notification of RAID sub-optimal --- meaning that the appliance is running through on a health-check of the appliance's RAID.  You should be getting a notification once RAID status has returned to OPTIMAL, or as per the older OS revisions, READY:
    myc170.local> version
    Current Version
    ===============
    UDI: C170 V01 FCH1428V06A
    Name: C170
    Description: Cisco IronPort C170
    Product: Cisco IronPort C170 Messaging Gateway(tm) Appliance
    Model: C170
    Version: 7.6.3-019
    Build Date: 2013-06-09
    Install Date: 2014-09-12 13:52:24
    Serial #: xxxxxxD87B39-yyyyyy8V06A
    BIOS: 9B1C115A
    RAID: 02
    RAID Status: READY
    RAID Type: 1
    BMC: 2.01

  • HT201263 my ipad 2 3G crashed while playing an HD movie on iOS 7.1, then it enter into rcovery mode, i tried itunes restore and it fails showing unknown error (27), i retried for about 100 times with no benefit.... any ideas or help please

    my ipad 2 3G crashed while playing an HD movie on iOS 7.1, then it enter into recovery mode, i tried itunes restore and it fails showing unknown error (27), i retried for about 100 times with no benefit.... any ideas or help please???

    By the way, i am using Windows 7 x64 and updated itunes

  • Itunes showing unknown error (-208)

    itunes showing unknown error (-208) whenever I try to play anything. Any ideas?
    Self Designed Mix   Windows XP Pro   Amd cpu
    Self Designed Mix   Windows XP Pro   Amd cpu

    Flashmark, welcome to Apple discussions.
    Glad you got it sorted!
    Hi Flashmark wonder if you can help me ? New user and just down loaded a track from music store then authorised pc but unknown error (-208) "there was an error in the music store please try again later" keeps coming up... been trying for three days now but still the same message!! Can you Help please ?

  • ITunes keep showing unknown error 48 while restoring iphone 4s. I've already followed applesupport suggestions of reinstalling iTunes, deleting previously downloaded ipsw on my computer and re-downloading it (countless times!) but still to no avail.

    Hi. A very much help needed.
    - iTunes keep showing unknown error (48) while restoring my iphone 4s
    - I've already re-install iTunes various times
    - Already delete previously downloaded 8.3 ipsw and re-downloaded it countless times
    - Changed and edited hosts in windows drivers as per shown on guides
    but... to no avail!!!!
    I am now without any phone to be used.
    HELP ME PLEASE

    Hello Sean,
    It sounds like you are constantly needing to restore your phone because it keeps going into recovery mode. Usually putting a device into recovery mode and restoring it can help isolate an issue to your iPhone hardware if an issue persists afterwards. I would try manually putting it into recovery mode and restoring it 1 more time:
    If you can't update or restore your iOS device
    http://support.apple.com/kb/HT1808
    If that does not resolve it the symptoms indicate to me that it is a hardware issue causing this to happen and would seek service for it:
    iPhone Repair - Other Repairs
    https://www.apple.com/support/iphone/repair/other/
    Thank you for using Apple Support Communities.
    All the best,
    Sterling

  • How can I edit author name in my podcast after publishing...now it shows "unknown"

    How can I edit author name in my podcast after publishing...now it shows "unknown"...thanks a lot for help^^

    The author's name is carried in the 'itunes:author' tag. You will need to enter it in the appropriate field in whatever program or online service you are using to make your podcast.

  • Sdo geometry datatype showing unknown in bi administration

    hi all,
    Iam using obiii 11g .
    iam facing data type issue. table contains sdo_geometry data type .
    After importing the table from data base .
    data type of one coumn showing unknown .but actuall its data type is sdo_geometry in data base .
    whe i click view data ,data is not coming for particular that unknown data type.
    what is compatibility data type of bi admin.
    thanks in advance
    balu

    We opened an SR with Oracle (3-8366783331).
    They found that there were some missing configurations.
    The types MV_STRINGLIST, MV_NUMBERLIST and MV_DATELIST are not created in the schema used in the datasource
    Solution
    Create the types as the user connected to the Mapviewer Datasource
    conn / as sysdba
    grant create type to user;
    conn user/password
    CREATE or REPLACE type MV_STRINGLIST as TABLE of VARCHAR2(1000);
    CREATE or REPLACE type MV_NUMBERLIST as TABLE of NUMBER;
    CREATE or REPLACE type MV_DATELIST as TABLE of DATE;

  • Why Firefox not Sync will automatically showing unknown error?

    why Firefox not Sync will automatically showing unknown error?

    How long has been this happening? Have you tried again?
    I will encourage you to use the recommendations on this article whenever Sync returns Unknown errors for a long period of time.
    [[Firefox Sync is not working]]
    Sometimes it's just as simple as a connection issue between your computer and the servers.

  • 2960X-48FPS-L switch showing unknown with SFP plugged in.

    show interface status
    Gi1/0/49                     notconnect   1            auto   auto unknown     (GLC-SX-MMD)
    Gi1/0/50                     notconnect   1            auto   auto Not Present(no SFP installed)
    Gi1/0/51                     notconnect   1            auto   auto unknown     (GLC-SX-MM)
    Gi1/0/52                     notconnect   1            auto   auto unknown     (GLC-LH-SM)
    * no matter what type of SFP is installed switch just shows unknown
    show version
    Cisco IOS Software, C2960X Software (C2960X-UNIVERSALK9-M), Version 15.0(2)EX5, RELEASE SOFTWARE (fc1)
    Technical Support: http://www.cisco.com/techsupport
    Copyright (c) 1986-2014 by Cisco Systems, Inc.
    Compiled Fri 21-Feb-14 05:54 by prod_rel_team
    ROM: Bootstrap program is C2960X boot loader
    BOOTLDR: C2960X Boot Loader (C2960X-HBOOT-M) Version 15.2(2r)E1, RELEASE SOFTWARE (fc1)
     uptime is 3 weeks, 6 days, 16 hours, 53 minutes
    System returned to ROM by power-on
    System restarted at 00:49:12 UTC Fri Mar 20 2015
    System image file is "flash:/c2960x-universalk9-mz.150-2.EX5/c2960x-universalk9-mz.150-2.EX5.bin"
    Switch Ports Model              SW Version            SW Image
    *    1 52    WS-C2960X-48FPS-L  15.0(2)EX5            C2960X-UNIVERSALK9-M
    Configuration register is 0xF
    I've read maybe a IOS issue, but why would the recommended version still have a bug like this in it?
    I have upgraded to 15.2(2)E2, and also downgraded to 150(2)EX3 and no change with status on SFP ports, still showing unknown for any SFP plugged into them.
    Moving on to another switch, just to verify if its a single switch issue or not.  I had a c2960x-24ps-l and this switch was on IOS 15.0(2)EX5 like the 2960x-48fps-l, but this switch did recognize the 4 different SFP's I plugged in.  So it doesn't look like an IOS image issue. 
    I have another 2960x-48fps-l, i'll fire up and see if it recognizes the SFP's.

    Leo, just saw your updated message, I fired up two other same model switches with identical IOS's one 24port and the other another 48 port model, and both were able to identify the SFP's correctly.
    The one thing different on the switch not identifying the SFP's is the [SYST] light on the front of the switch is amber in color, with the [MAST] and [STAT] lights green.  On the switches that did read the SFP's correctly all three lights were green.

  • Iphone 5 cant be restored, it shows unknown error -1 while trying to restore and it only display connect to Itune

    Iphone 5 cant be restored, it shows unknown error -1 while trying to restore and it only display connect to Itune

    Greetings ayokunlefromlos angeles,
    Welcome to the Apple Support Communities!
    I understand that when attempting to restore your iPhone you receive an error and your iPhone shows the Connect to iTunes screen. To begin troubleshooting, I would suggest manually placing your iPhone in recovery mode and attempting the restore. Please follow the instructions located in the attached article to complete this process. 
    If you can't update or restore your iPhone, iPad, or iPod touch - Apple Support
    Cheers,
    Joe

  • TS3694 My iPhone 3gs got an update today ios 6.1.6 but when i press install update my phone shutdown and shows connect to itunes display, after i connect to itunes it shows unknown erro (306).....whats is happening and what should i do ?

    My iPhone 3gs got an update today ios 6.1.6 but when i press install update my phone shutdown and shows connect to itunes display, after i connect to itunes it shows unknown erro (306).....whats is happening and what should i do ?

    Take a look at this post: https://discussions.apple.com/thread/5036467?tstart=0
    iTunes: Advanced iTunes Store troubleshooting
    http://support.apple.com/kb/TS3297
    iTunes Store loads partially or returns "Error 306" or "Error 10054"
    Proxies, parental control settings and software, security or filtering software, or a bad iTunes Store cache can cause this.
    To address proxies, Remove Internet Options proxy settings and connect to the Internet without a proxy.
    To reset iTunes Store cache:
    In iTunes, choose iTunes > Preferences (Mac) or Edit > Preferences(PC).
    Click the Advanced tab.
    Click the "Reset cache" button.
    Click OK and see if the issue is resolved.
    Adjust Parental Controls in iTunes:
    Open iTunes.
    Access iTunes preferences:
    On a Mac: From the iTunes menu, choose Preferences.
    On a Windows PC: From the Edit menu, choose Preferences.
    Click the Parental Controls tab.
    Remove restrictions on Parental Controls.
    For more information on parental controls or content filtering software, seeiTunes 10.5 for Windows: May see performance issues and blank iTunes Store.
    For more information on other security software, see iTunes: Troubleshooting security software issues.

  • Ethernet showing 'Unknown state'

    I have just bought a time Capsule wanted to backup using ethernet, but my iMac wouldn't detect the capsule. I tested it with my laptop and it found it fine, so the cable and capsule aren't the problem.
    I found both ethernet and firewire ports showing 'inactive'. I activated them but now they both show 'unknown state'. I have always used wireless so don't know if the ethernet was always like this.
    Any help would be greatly appreciated.
    Mike

    I don't see where you said AirPort was OFF in the first post. And I did not mean to imply that you did not already have it connected with a Ethernet cable. Obviously, if you want it wired, there has to be a wire...
    Try going to System Preferences Network pane. In the sidebar, if AirPort is listed above Ethernet, click on the little gear icon and select +Set Service Order+. Make Ethernet appear first on the list. Then try restarting.

  • Phones showing unknown status but check physically the phones are registered ok

    Hi,
    Would like to know the following,
    The publisher and subscriber both show the phones of one particular cluster showing all the phones in unknown status but if we checked them physically the phones are registered well and able to make calls and received calls
    Both of the version are 7.1
    Thanks
    Alan

    Aditya
       Thanks for your response.
     There are 5 nodes in the cluster ( 1Pub + 4Sub).
    Phones are registered with subscriber.
    If I login the subscriber web page, the status showing registered. But if I login Publisher web page the status showing unknown. Phones are Physically registered. I restarted the RIS service but no use. DB replication status showing 2.
    Thanks
    Venkkatesh.L

  • HT201210 please,I need your help ! I was updating my iphone ios to ios4.2 and then problems begins when it shows that it needs to restore the factory software to I was trying to restore ,but that didn't happen it begins but then it shows unknown error 101

    please,I need your help ! I was updating my iphone ios to ios4.2 and then problems begins when it shows that it needs to restore the factory software to I was trying to restore ,but that didn't happen it begins restoring but then it shows unknown error 1015

    Stop being impatient.
    From the article that the question was posted from:
    Errors related to downgrading iOS
    The required resource cannot be found: This alert message occurs when your device has a newer version of iOS than what is available in iTunes. When troubleshooting a device that presents this alert message, go to Settings > General > About and check the version of iOS on the device. If it is newer than the latest released iOS version, the device may have a prerelease developer version of iOS installed.   Installing an older version of iOS over a newer version is not supported.
    Error 1015: This error is typically caused by attempts to downgrade the iPhone, iPad, or iPod touch's software. This can occur when you attempt to restore using an older .ipsw file. Downgrading to a previous version is not supported. To resolve this issue, attempt to restore with the latest iPhone, iPad, or iPod touch software available from Apple. This error can also occur when an unauthorized modification of the iOS has occurred and you are now trying to restore to an authorized, default state.
    You cannot downgrade.
    If you have a 3GS, you can only install iOS 6.1.3 which is the current version of iOS for the device.

  • Windows Updates showing Unknown computers

    Hi,
    I am deploying Windows Updates and the Statistics window shows a high number of 'Unknown' computers, how do I find out these machines and what is the best method to have this number as close to zero as possible?
    In the Software Library > Software Updates > Software Update Groups pane the statistics are as below for Windows 7 Updates:

    Hi,
    We could get those machines which shows unknown from reports. Then troubleshoot the process for the software update group installation and the state messages sent to MP on some specific machines.
    Best Regards,
    Joyce Li
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

Maybe you are looking for

  • I bought a Macbook Air, how can I change the icloud credentials for ownership..?

    I bought a Macbook Air used, the credentials in icloud, still shows the previus owner id, I contacted him, and he gave me the information, but I need to know, how can I changed that information, because I need to update that info with my credentials.

  • FCP 5 universal

    i have read apples site on universal software. straight to the point, which of the universal upgrades do i need to buy to get my DVD Studio 4, Motion 2 and Final Cut 5 powermac versions to work on my MacBook Pro with Intel processor. will the 199 DVD

  • Upgrade to BusinessObjects XI 3.1 SP3

    Hi everyone, I have to upgrade to BusinessObjects XI 3.1 SP3 but I have some doubts. In the server I find the following products installed: -     BusinessObjects Enterprise XI 3.1 -     BusinessObjects Enterprise XI 3.1 Spanish Language Pack -     Bu

  • Audio level way too high after disc burn

    Hello! I just burned my first test disc of a project and have come across a strange problem. The audio on all of my tracks has jumped to an extremely high (and unacceptable) level. It is well above the level set in FCP and even what plays when simula

  • Photoshop 6 not compatible with windows 8!

    I found on the compability windows website that this version is not compatible with windows 8. What to do???