Tab 7.0 Update Issues / Findings

* Update Notice received/Performed 11/3 @ 9:30pm
- Had two browser windows active, something already in 'Copy' memory, went to Copy again and it closed all the browser windows
- Scrolling is smoother but alittle more touchy.   If a web page has an embede video in it, the video window lags way behind the scrolling until you release your finger, making it difficult to postion the page because the video window is blocking your view.
Additionally, similar delays occur on other sites that have layered graphics.  You can see a good example of this problem on this site  www.govoutreach.com
Another bad example I just ran into is scrolling an applications settings menu, All te characters hung & strechted when trying to scroll up or down.  Took the screen about 5 seconds to clear up.  App is called Marine Weather, and the problem occurs when modifying layer options of the mapping.  I've notified the developer to double check w/them as well.  I also checked the problem against Google's Layers, but nothing occured there.
- After update, Charging via usb, Battery indicator in upper-right showed a negitive sign.  Also...  Info/Status details describe current as 'Decharging'  What is occuring?
- Sometimes the Task Manager lags abit when starting up
- Screen Off... When plugging in the charger, the screen would come back on, but then, go back off if you didn't enter your password (about 5 seconds or so).  But after the update, the screen stays on, and now requires you to press th power button to make it sleep.  On the same note, when the battery fully charges, the screen comes on (due to notification), but doesn't return to its off state.
- Typing Text...  When typing/using the (period,comma,question) button, each depression leaves an odd looking character until you press the space bar, which the reveals the true character selected.  Additionally, if you touch the button, say for a period, wait a few seconds, then the odd character would go away, then the peroid would appear.  The odd looking character appears like a period with a small dash under it.  This issue makes it difficult when tapping to select, as your not able to see the true character until you spacebar away, or wait a few seconds before continuing to type.
- I'm experiencing more browser/application aborts as days pass.
- The browser does'nt respond as smooth as before the update.  Slight jerkyness, Longer pauses before another actin occurs such as opening another browser window from clicking on a link.
- The New Highlighter/Text Selector w/the pop-up options is erratic, and won't let you select text accurately.  It wants to jump to the left margine of a given paragraph, and trying to drag it back won't work sometimes, it still wants to snap back to the left.
- I'm getting the feeling my battery is draining alittle sooner?  Does this have anything todo with the Decharging I noticed occuring after the update?
- First wakeup in the morning (from sleep state), seems to take longer for screen to become active, and to turn landscape mode
- Unless I'm missing a setting on my side, I've also noticed I ha n't been getting notifications  for applications I have installed.  I have to go into the Android Market, then view 'My Apps' to see if there are any updates.
- Built-in Calendar... Making changes to the settings, Time, you cannot modify the time zone without select Locking the time zone first, backing out of settings, going back in, only then will the time zone list be available to edit. / Also, option to add/delete email accounts is missing.
- Settings > Accounts & Sync, Ability to turn individual accounts is missing
- Week-plus of use since update.  Getting less battery time over 8 hour period than before.
- Using Google Mapping, taking much longer than before to map out area, espeicially with Traffic activated.
---END  11/14/2011
If I can be of any further assistance or Beta testing, please contact me via my email on account.

If I can add another problem to the list: after the last update, my Tab is no longer able to access WiFi via my Samsung laptop running Windows 7 (I was able to, and did daily, before the update). Nothing has been touched on the laptop. Before, I had been so relieved to be able to tether onto my WiFi at home through my laptop because without it, my Tab will not connect to my Belkin wireless router, no matter what channel, what encryption method (or no encryption) used - **bleep** ANNOYING!  Now, neither will work.  I thought updates were supposed to fix things (like not being able to connect to Belkin routers), not make them worse! 
Please don't respond saying something is not set up right on my end. The Belkin issue is well documented on blogs throughout the internet, and it has never been resolved.  The only thing that changed for me was the firmware on the Tab - no other settings were touched, although after not being able to connect, I did try numerous variations to try to get it to connect again.  Has Verizon/Samsung just given up on on the 7" (Belkin issue not being resolved, no Gingerbread...)?  I haven't seen any EOL notice for it, so this flakey WiFi issue needs to be resolved.
Device: Samsung Galaxy Tab, 7", SCH-I800, firmware version 2.3.5

Similar Messages

  • New tabs are not updating the names of the sites they have loaded. When I open a new tab and load a site, the tab simply stays named "New Tab". When I open a link in a new window, it shows "Connecting..." even while its fully loaded.

    New tabs are not updating the names of the sites they have loaded. When I open a new tab and load a site, the tab simply stays named "New Tab". When I open a link in a new window, it shows "Connecting..." even while its fully loaded.

    This issue can be caused by an extension that isn't working properly.
    Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
    * Don't make any changes on the Safe mode start window.
    * https://support.mozilla.com/kb/Safe+Mode
    * [[Troubleshooting extensions and themes]]

  • [Forum FAQ] Common steps to start troubleshooting Windows Update issues

    In this article, we provide you some common steps to quickly narrow down Windows Update issues. Before you post your question, you can follow the steps below to see whether
    the issue can be identified and resolved. If not, please post it in Windows 8/8.1 Forum with the analyzed details.
    Scenario 1: New updates can’t be checked.
    Make sure your internet connection works fine.
    Make sure you could connect to Windows Update Server or Microsoft Update.
    For more information about how to troubleshoot problems connecting to Windows Update or to Microsoft Update,
    visit the following Microsoft Web site:
    http://support.microsoft.com/kb/818018
    Scenario 2: Windows Update can’t be installed or configured.
    Suggestion 1: Run the
    Windows Update Troubleshooter
    Press
    WINDOWS + X combination key to open the Control Panel;
    Change its view by “Category”;
    Click
    Find and fix problems;
    Under
    System and Security entry, click Fix problems with Windows Update.
    Follow the instruction to complete it.
    Suggestion 2:
    Make sure the following services could startup automatically
    Press WINDOWS + R combination key, type “services.msc”, press
    Enter;
    Find out the following services and the dependent services:
    Windows Update
    Background Intelligent Transfer Service
    Windows Modules Installer
    Double click every service, on General tab, set its Startup type as “Automatic”;
    Click Apply and OK button.
    Note: If these services miss or damage, you need to use Windows 8/8.1 installation media restore them.
    Suggestion 3:
    Delete the Windows Update cache
    Press
    WINDOWS + R combination key, type “services.msc”, press
    Enter;
    Find out the
    Windows Update service, right click and stop it;
    Located to
    C:\Windows\SoftwareDistribution;
    Delete the whole
    SoftwareDistribution folder.
    Suggestion 4:
    Reset the Windows Update component
    For more information about how to
    reset the Windows update component,
    visit the following Microsoft Web site:
    http://support.microsoft.com/kb/971058
    Suggestion 5:
    Install the Windows Update in a
    Clean Boot state
    For more information about How to perform a clean boot in Windows,
    visit the following Microsoft Web site:
    http://support.microsoft.com/kb/929135
    Suggestion 6:
    Reset, refresh or restore your PC, and then try to Windows Update
    http://windows.microsoft.com/en-gb/windows-8/restore-refresh-reset-pc
    Scenario 3: You might still be repeatedly offered the same update.
    You need to check its installation status and decide if it should be installed again.
    For more
    information about Windows Update or Microsoft Update repeatedly offers the same update,
    visit the following Microsoft Web site:
    http://support.microsoft.com/kb/910339
    Here are the solutions for some common Windows Update error codes or corresponding issues:
    1. .NET Framework update installation error: "0x80070643" or "0x643"
    http://support.microsoft.com/kb/976982
    2. Error 0x800B0100 when you try to install Windows Updates or Microsoft Updates
    http://support.microsoft.com/kb/956702/en-us
    3. Error 0x80070005 in Windows Update when you try to install updates
    http://support.microsoft.com/kb/968003/en-us
    4. Error message 80246008
    http://support.microsoft.com/kb/971058
    5. Error message 80070003
    Stop Windows Update service, rename SoftwareDistribution and catroot2 folder, then restart Windows Update service.
    6. Error message 0x80072f8f
    Check and correct PC’s Time and Date. 
    7. Automatic Windows update settings is gray out.
    Please locate to the below registry:
    HKEY_LOCAL_MACHINE\SOFTWARE\Policies\Microsoft\Windows\WindowsUpdate\AU.
    Add Value name: NoAutoUpdate
    Value data: 0 or 1
    0: Automatic Updates is enabled (default).
    1: Automatic Updates is disabled.
    Windows Store app update general troubleshooting steps
    If you're unable to open the Store, try running the
    Apps troubleshooter
    If you can’t find the app update. Please consider these scenario:
    Confirm if you set the proxy which affect the Windows store update.
    For more information about using authenticated proxy servers together with Windows
    8, visit the following Microsoft Web site:
    http://support.microsoft.com/kb/2778122
    Confirm the app is available in your current region;
    Make sure “Automatically update my apps” is set to Yes;
    Make sure the latest updates are installed on your PC and that your antivirus program isn't preventing the app from running.
    Make sure the app isn't blocked by Windows Firewall
    Sync your app licenses.
    Try to clear
    the Windows store cache on your PC:
    Press
    WINDOWS + R combination key, type “wsreset”, press
    Enter;
    Try to install the update again.
    Applies to: Windows 8 and Windows 8.1
    Please click to vote if the post helps you. This can be beneficial to other community members reading the thread.

    NEW
    ADK download link is unavailable
    https://dev.windows.com/en-US/featured/hardware/windows-10-hardware-preview-tools
    Working one here at the bottom of the page

  • Cannot transfer videos taken from my Canon camera(MOV files) to the iPad 4. They have previous with no problems at all. Is this an update issue?

    Cannot transfer videos taken from my Canon camera(MOV files) to the iPad 4. They have previous with no problems at all. Is this an update issue? I tried to sync them over using iTunes last night but it says that they cannot be played on the device. But they have previously

    1, you can't at the moment, though with iOS 5 in the Autumn, from http://www.apple.com/ios/ios5/features.html#photos :
    Even organize your photos in albums — right on your device
    2, by removing it from you synced from and re-syncing. Only photos taken with the iPad, copied to it via the camera connection kit, or saved from emails/websites etc can be deleted directly on the iPad (either via the trashcan icon in the top right corner if viewing the photo in full screen, or via the icon of the box with the arrow coming out of it in thumbnail view)
    3, the location of the photos that you synced to the iPad should be listed on the iPad's Photos tab when connected to your computer's iTunes.
    4, you can copy the photos from your iPad to your computer : http://support.apple.com/kb/HT4083 . You should also be able to delete them from the iPad as part of the transfer process to your computer, and it's then your choice whether to add them to your sync photo list so as to copy them back to the iPad. Copying them to your computer would allow you to organise them into folders and therefore be able to sync them back into separate albums.
    5, I don't use Dropbox either. There are some third-party browser apps in the iTunes App Store that allow you to download pages so that you can view them when offline e.g. Atomic Web (the whole page is saved within Atomic Web, it doesn't place a photo into the Photos app)
    6, deleting content should help. If you remove an app from your iPad then you also remove the content that it's got on the iPad - so if you then decide to reinstall it back onto the iPad then you will need to manually add back any content that you want in it. None of the Apple built-in apps (including Photos) can be removed from the iPad

  • Where is the forum for Windows Update issues with Windows 10 TP 9926

    Trying to find a fix to the Windows Update issue with Windows 10 TP 9926 build and can't find the correct forum to post this question?
    This will impact receiving the new build upgrades and will impact test strategy for the new supported OS in our desktop application.

    Might try them over here.
    http://answers.microsoft.com/en-us/insider/forum/insider_wintp-insider_update?sort=lastreplydate&dir=desc&tab=Threads&status=&mod=&modAge=&advFil=&postedAfter=&postedBefore=&threadType=All&tm=1427037339534
    Regards, Dave Patrick ....
    Microsoft Certified Professional
    Microsoft MVP [Windows]
    Disclaimer: This posting is provided "AS IS" with no warranties or guarantees , and confers no rights.

  • Tabs only open in a new window. Ctl T opens a new window NOT a new tab help-last update this problem started. How do I set FF back to open tabs in 1 window

    Tabs only open in a new window. Ctl T opens a new window NOT a new tab help-last update this problem started 2 days ago. How do I set FF back to open tabs in 1 window?
    There is no plus sign and going into optins and changing settings has not worked. I have uninstall FF and reinstall-keeping my personalization-and that was no help.
    Right clicking on FF Icon to open a new tab, or going up to FF drop down tab and clicking on new tab both do not work.
    Help everything opens a new window not a new tab. there seems to be no way to reset this or to chose a different optin. I just downloaded new tabs at end addon and it didn't do a thing.

    as a first troubleshooting step - does it work like normally when you open & run firefox in [[Safe Mode|safemode]] by pressing the shift key while you open firefox (all other instances have to be closed before)...

  • Why can't we get a straight answer from Apple about updater issues?

    Why are there thousands and thousands of posts from people all having the same issue? We try to update IPod software using latest updater, and it causes IPod to no longer be recognized. All we want is someone from Apple to FIX THE PROBLEM! Yet all we get are refferals to complicated articles that never seem to work for at least half the people. Clearly it is a problem with these updaters. WHY IS APPLE NOT FIXING THIS ISSUE? Can anyone give me a straight answer!?

    Hi Wolf,
    Welcome to Apple Discussions
    "thousands and thousands of posts"
    There are roughly 10,300 thread with 50,000 posts in the iPod Nano forum, and there are probably another 500,000 who don't even know it exists. I don't there there has been a thousand posts on the updater issue. It may seem like thousands upon thousands, but don't forget; you're at an Apple Support Forum.
    "All we want is someone from Apple to FIX THE PROBLEM!thousands and thousands of posts"
    There's no need to "shout". I don't think Apple is going to hear you from shouting in a user to user forum. Nor will you probably get a answer (here) from Apple for the same reason. I have a -------- (straight) answer for you. I don't know what's going on specifically (no one really knows in this forum because they are all users. Anyone who would know won't say), but I can assure you that Apple isn't ignoring the issue. They are the quickest to respond to any problem that comes their way. If you would like to get Apple's attention, I don't suggest ranting and raving in the iPod user to user forum. I suggest submitting polite feedback to Apple here.
    Jon

  • Is there a consensus on how to solve security update issues?

    hi,
    i'm writing to you from a PPC G4 (AGP graphics) that will self-destruct by the time i switch off and (attempt) to re-start tomorrow. i will then need to do a re-install, just to see if i have gotten any replies (grinds teeth to the root). it will probably be my 8 th re-install in the past month. i just can'st takes no mores, Cap'n
    <exasperation>deep breath... each time i have done a clean install, zero-ed all data when erasing (7 times over, on this occasion), repaired permissions before and after each software update, and followed every advice i could find via google to pre-empt another "Error: underlying task reported failure on exit" and the inevitable hanging grey screen; i have earned nothing but another Disk Utility report of the same problem. my HD seems to be OK - Disk Utility and Disk Warrior both say it's "verified" by SMART (although i've read this could be no assurance...). it's 40 GB, nothing else installed but NetBarrier; nothing saved on it (just 3GB of OS).
    i've searched this forum over the last weekend and come across a diverse range of methods in resolving software update issues. i have tried downloading the security update and safari 3.2 directly from the site and bypassing Software Update- to no avail (but noticed that they are quite larger in MB than via Software Update??).
    the one suggestion the intrigued me was installing the update via Terminal. why would this be any different? the worst thing about this is that there is no universal way that'll work for all, just individual solutions for different macs??? could my problem be exacerbated by using the double layer (double the permissions to fix?) of a Panther OS with Tiger Upgrade disk?
    when i last tried to resolve the "error" with safe mode, fsck and DU Repair Disk/Permissions, which initially failed, i resorted to Disk Warrior, which re-built the directory, and "fixed" the HD. when i re-tried fsck it said the HD was "ok", but i still had the "error: underlying task..." on DU?
    is there an issue with the Security Update oo8 because it's PRIMARILY for 10.5 and not Tiger? why have some encountered this problem and others escaped any seeming conflicts ? is this problem also caused by JAVA updates (there are, after all, 4 updates!)
    more importantly, WHAT CAN I DOOOOOOOO?
    thank you

    looking at your suggestion to check /Library/Startup items in the concurrent thread ("Help needed after installing Security Update 2008-008"), i recalled that the only thing i have in this file system is 3 folders concerning Intego, NetBarrier and Virus Barrier. one of these contains the NetBarrier x4 daemon which has no image, just the apple "pencil, ruler, pen on paper" "A" image. i don't think it correctly downloaded, but this the case in every instance.
    i'm running netbarrier x4 10.4.5 updated and downloaded on installation. intego Support says that there should be nothing in my "Startup/Login items". i thought they meant Login items (users>login items) because when i take the folders out of my "/Library/Startup items", NetBarrier fails to "initialize".
    intego is now on newtbarrier x5, but they say x4 is fully compatible with Tiger???
    my baby maybe getting on, but it's strong enough, i just need to know what's bugging it!

  • 10.9.2 Update Issue (VPN) - Eclipse Perl debugger issues while connected to VPN

    This post was initially added to this discussion: 10.9.2 Mavericks update issues
    I have yet another issue related to 10.9.2 update - Eclipse Perl debugger issues while connected to VPN...
    One of the big changes introduced by 10.9.2 update - are VPN changes (security fixes). Unfortunately, whatever these changes are - they "broke" Eclipse (OpenSource IDE) debugger. I am not sure if *all* programming languages (Eclipse plugins) are affected by this, but I know for sure that 'Epic' (Perl plugin) debugger *stopped working* while system is connected through VPN.
    Here is the error that gets “popped-up” in the Eclipse:
    Timed out while waiting for Perl debugger connection
    … and here is exact exception stack that gets printed:
    Unable to connect to remote host: 130.10.210.74:5000
    Compilation failed in require.
    at /Users/valeriy/workspace/ROBO-PROD-RA-685/src/lib/test/Val_test.pm line 0.
              main::BEGIN() called at /Users/valeriy/workspace/.metadata/.plugins/org.epic.debug/perl5db.pl line 0
              eval {...} called at /Users/valeriy/workspace/.metadata/.plugins/org.epic.debug/perl5db.pl line 0
    BEGIN failed--compilation aborted.
    at /Users/valeriy/workspace/ROBO-PROD-RA-685/src/lib/test/Val_test.pm line 0.
    Can't use an undefined value as a symbol reference at /Users/valeriy/workspace/.metadata/.plugins/org.epic.debug/perl5db.pl line 7596.
    END failed--call queue aborted.
    at /Users/valeriy/workspace/ROBO-PROD-RA-685/src/lib/test/Val_test.pm line 0.
    (of course IP address changes dynamically for each VPN connection session)…
    I was able to prove that this issue is related to 10.9.2 update:
    Issue *does not* exist under 10.9.1 (I had to revert back to 10.9.1 to get it working again)
    No updates were performed around the same time 10.9.2 update occurred (I verified that using Software Update log)
    No configuration changes were introduced around the same time
    Reverting back to 10.9.1 using Time Machine (thanks god I had backup !!!) fixed the issue
    Steps to reproduce this issue:
    In Eclipse, try to use 'Epic' (Perl plugin) to debug any perl script while *not* connected through VPNEpic debugger works
    Connect to VPN
    Start Epic debugger to debug same script
    Debugger *does not* start, and "Timed out while waiting for Perl debugger connection" error pop-up comes up after some time. At the same time, exception stack (listed above) is printed in Eclipse's console
    I am programmer/software developer, I work remotely (telecommute) and thus have to rely on use of VPN to connect to company's intranet. Perl - is primary language used by my team, and we use Eclipse IDE with Epic plugin - heavily. Use of Epic's debugger - is a *very large* aspect of my work, I cannot work without it. So in essense, 10.9.2 has *entirely* disrupted my ability to work! It took me almost a week to get back to normal work environment, and I cannot afford to let it happen again... I need Apple's development team resolve this VPN related issue, as soon as possible! Because of this issue, I am *stuck* with 10.9.1 and can not upgrade my laptop to any other versions. In fact, I had to disable system updates - just so I do not run into this issue again... I contacted Apple's Tech Support on 02/28 with this issue (Ref: 582428110), asking to raise trouble ticket. Since then, I tried to follow-up on that issue, but do not get any information. Please advise on the status:
    is there a trouble ticket to track this issue?
    is there any progress?
    what's the ETA for an update that fixes this problem?
    - Val
    Message was edited by: vpogrebi

    Am I the only one experiencing this issue ???

  • My new iPod Classic will not sync with my new Mac Book. My iPhone 5 does, so does 2nd gen. iPod touch. Apple Store cannot figure it out. Tried different Classics on different Macs, same thing. iTunes update issue ?

    The iPod Classic I bought a month ago is not synching with my new Mac Book I bought 3 weeks ago. All the software was immediately updated. My iPhone 5 synchs fine, and so does my 2nd generaton iPod Touch. The original computer I synched all of these devices on was my HP latop. I bought my Mac and Classic to the Apple Store for a 'Genius Appt' and they could not figure out what the problem is. The connected my Classic to another computer and the same thing happens. It says device is not recognized. They also took other iPod Classics and connected them to my Mac and other Macs. The same thing was happening. They took notes and said it probably is an iTunes update issue.
    I can manually drag songs into my Classic but I lost all playlists because it cannot be backed up as well and they had to restore it. For now I am holding on to it but it's usless to me if I cannot use it the way I liked too. I used it for the gym and bike riding and my last iPod battery died after 6 years. A charge would last 45 miutes. I love the Classic for what I use it for but it's a $275 brick to me now. At least the renewed by receipt so I can get a full refund.
    Is anyone else seeing this issue ? The Apple Store employee said he saw a first generation iPad havng the same issue. As of now the Support Dest is unaware of this. As much as I love my new Mac I am disappointed I cannot sync my new Classic to it. Total bummer.
    Any help would be apprecated.

    By the way, I totally restored everything. It was ok. It starts to 'unrecognize' my iPod Classic when it comes to synching with iPhoto. After this happened all the menus disappeared from my iPod (music, Podcasts, movies synched fine). It seems to be a problem when synching with iPhoto. It was the same thing before.

  • Unable to Resolve Windows Update Issue in Windows 8.1

    Hello,
    I recently, as far back as 1 month ago, began experiencing issues with the update service under the Windows 8.1 OS platform.
    I found that I was having to repeatedly run the Windows Update Troubleshooting Tool. This appeared to fix the issue with each run of the tool, but eventually I'd have the same problem receiving updates again. My problem is as follows:
    1. Windows Update service hangs during register analysis.
    2. Unable to reset (stop or restart) wuauserv. 
    3. Unable to reset (stop or restart) Cryptserv.
    4. Unable to reset (stop or restart) BITS.
    5. Unit recently, was unable to connect to internet from Desktop GUI, but was able to connect using Metro GUI.
    I'm not sure is there was a recent update that caused this issue, but I can no longer download updates for my system, nor can I successfully run the Windows Update Fixit tool.

    Hi,
    Let's confirm these situations:
    Now your desktop Internet Explorer can't connect Internet.
    You receiving the same updates again and again.
    If I am right, please check that update's installation status from update history.
    Then refer to this article to troubleshoot:
    http://social.technet.microsoft.com/Forums/en-US/c842b997-42a4-41fb-9992-b58d65d068d9/forum-faq-common-steps-to-start-troubleshooting-windows-update-issues?forum=w8itprogeneral
    Karen Hu
    TechNet Community Support

  • Sender JDBC Adapter Select/Update Issue

    Dear All,
    We have configured a Sender JDBC Adapter to Poll data from the DB2 tables. It is working fine and both the select and the update queries written are also getting properly executed and are changing the status of the flag from Y to N once read from database.
    In the communication channel ->
    select * from <table> where flag = 'N'.
    update <table> set flag = 'Y' where flag = 'N'.
    But I have one doubt after executing the select query some new data comes into the table of status flag 'N"., then will this unselected data will also be updated to 'Y' .
    The question is while we do a select and update from XI on the DB table and at the same time there is an insert happening into the table from the other end how will the adpater behave in this case.Will it result in missing of some records during next select/update transaction from XI..
    Your inputs will be appreciated.
    Regards
    Amit

    Amit
    Did you ever get a solution to your question ?
       Sender JDBC Adapter Select/Update Issue  
    Posted: Apr 24, 2008 2:29 PM           Reply 
    Dear All,
    We have configured a Sender JDBC Adapter to Poll data from the DB2 tables. It is working fine and both the select and the update queries written are also getting properly executed and are changing the status of the flag from Y to N once read from database.
    In the communication channel ->
    select * from <table> where flag = 'N'.
    update <table> set flag = 'Y' where flag = 'N'.
    But I have one doubt after executing the select query some new data comes into the table of status flag 'N"., then will this unselected data will also be updated to 'Y' .
    The question is while we do a select and update from XI on the DB table and at the same time there is an insert happening into the table from the other end how will the adpater behave in this case.Will it result in missing of some records during next select/update transaction from XI..
    Your inputs will be appreciated.
    Regards
    Amit

  • Had update issues but now my iphone is in a loop of the apple sign then the circling thing, itunes doesnt even pick it up, cant get past this point!! ? any help?

    had update issues but now my iphone is in a loop of the apple sign then the circling thing, itunes doesnt even pick it up, cant get past this point!! ? any help?

    You might want to check this thread https://discussions.apple.com/thread/3374367 hope this helps

  • Has anyone called about the 1st Gen Update issue?

    I was just wondering if anyone has actually called Apple about the 3.1.3 Update issue with the 1st gen iTouches. I don't want to waste my time and call when they might just respond with "there's no current solution". My iPod has been bricked on that screen with the "plug in the USB cord" symbol for a few days. Help!

    My wife had the same problem with 1st gen 32gb Touch. She uses a pc based laptop with Vista OS. Couldn't get past the Apple logo even when trying to reset. I plugged into my Mac tonight, and for the heck of it, reset the iPod using the on/off button and home screen button. It now would appear in my iTunes and allowed me to reset. It is starting from scratch again (as she doesn't appreciate my play list), but at least it is fully operational again.
    Have seen where others state they can't restore. May be able to using a Mac. Food for thoughts anyway. Hope this helps.

  • Purchased tab shows 1 update available but can't update it.

    Purchased tab shows 1 update available, but I can't find what book. I keep getting popup that it can't download the update. Why did the updates tab disappear in ios8?
    FIrst it showed 2 updates, but I kept getting a popup that it couldn't download the update. So I had to search in my list of books which books had updates. I just deleted all the books that had an update message. It kept showing 2 updates available, until I deleted every book I could find that had an update. But now it keeps showing a 1, and I can't find the corresponding book, and I keep getting a popup that it can't download it, even when ibooks is closed.
    WHy did they delete the updates tab?

    What is the exact message you're getting?  I guarantee it's not "the iPhone needs iTunes".

Maybe you are looking for

  • Need help regarding "Macbook Pro Distorted Video or No Video issues"

    Hi there, I'm new and I'm kinda need help or opinion from all of you Mac users. I have a MPB which is the first generation released 2005-2006, which its 4 years back. Now, the main problem is after 4 years of non-graphic problems, I encounter the NVI

  • Questions about resizing and uploading pictures ...

    I have set up a desktop folder, and can store my resized pictures there through the export function in iPhoto.  When I export though, there doesn't seem to be any way to export directly to that folder.  Instead, I have to export to the desktop, then

  • Jittery output image to projector

    I am using the iMac video output to feed a 1x4 VGA splitter going out to 2 projectors (front & rear). The image on the front projector is jittery - the rear image is stable. This only occurs with the iMac. I've tested it with my Macbook and a DVD pla

  • Insufficient system resources

    I have a LenovoEMC px4-400r firmware: 4.1.108.32627 running in a domain environment. Randomly I'm getting:    Insufficient system resources exist to complete the requested service   on clients trying to connect to shares on the NAS. After rebooting t

  • Does the adapter use power when there's no phone connected?

    Hi all, I was wondering: Does the Apple poweradapter consume electricity, when there's no iPhone (or iPad etc.) connected to it? I leave my adapters and cables in a poweroutlet all the time, which I can turn off but I was just curious about this. I r