Tab "A CERTIFICATE NO" found not editable using tcode J1IGA

Hi Guru's
We unable to add JV number under tab "A CERTIFICATE NO" due to field is not editable using transaction J1IGA.
Will you please let us know the problem, we able to the same in our Quality system.
Thanks in Advance,
Firoz.

Hi Firoz Basha,
Can you give me the process flow for "A-Certificate".

Similar Messages

'The song "xyz" could not be used because the original file could not be found.

I am quite new to iTunes so please excuse me if the questions seem daft
I have recently changed my default iTunes Media folder location from my local C:\ drive to my home network storage device
(my PC is permanently mapped to this NAS storgae drive)
Now When I go to play a song in itunes I get the message 'The song "xyz" could not be used because the original file could not be found. Would you like to locate it"
Looking in the new iTunes Media folder, I can see the following folders and they are mostly empty:
Automatically Add to iTunes
Downloads
Mobile Applications
Music
Note that I have music that I bought from iTunes and music from other sources \ given to me by friends
Questions:
(1) How do I get all my music back into this new iTunes Media folder?
(2) Exactly which files contain my music? (I ask because we have 2 or 3 libraries that I wish to consolidate into 1 master Library for us all)
If I know exactly which files are required I can delete any other files cluttering up my storage and PC

Changing the media folder path tells iTunes where to put new media that is ripper or purchased. It may offer to consolidate to the new location when you make the edit, if not iTunes will expect existing content to remain on the original path.
The "missing file" error happens if the file is no longer where iTunes expects to find it. Possible causes are that you or some third party tool has moved, renamed or deleted the file, one of its parent folders, or the drive it lives on has had a change of drive letter. It is also possible that iTunes has changed from expecting the files to be in the pre-iTunes 9 layout to post-iTunes 9 layout, or vice-versa, and so is looking in slightly the wrong place.
Select a track with an exclamation mark, use Ctrl-I to Get Info, then click No when asked to try to locate the track. (Due to a bug in iTunes 12 you currently have to say No twice!) Look on the summary tab for the location that iTunes thinks the file should be. Now take a look around your hard drive(s). Hopefully you can locate the track in question. If a section of your library has simply been moved, a folder renamed, or a drive letter has changed, it should be possible to reverse the actions. If the difference between the two paths is an additional Music folder in one path then this is a layout issue. I can explain further if that is the case.
In some cases iTunes may be able to repair itself if you go through the same steps with Get Info but this time click Locate and browse to the lost track. It may then offer to attempt to automatically fix other broken links.
If another application like Windows Media Player has moved/renamed the files then the chances are that subtle differences in naming strategies will make it hard to restore the media to the precise path that iTunes is expecting. In such cases, as long as the missing files can be found somewhere, you should be able to use my FindTracks script to reconnect them to iTunes. See this post for an explanation of how it works.
For more background on the typical layout of the iTunes library see Make a split library portable.
1) It depends on exactly what you have done to break things.
2) Your media files are where you put them, or where iTunes copies them to when they are added to the library. If multiple libraries use the same set of media folders there can be problems if edits in one library cause content to be moved as the other libraries will no longer see those tracks on the original path, and won't know to look in a new one.
tt2

Error message: The preset used by one or more sequences in this project requires third-party components that could not be located. These sequences will be modified to use a custom sequence setting instead. To continue editing using the original preset, qu

Hello all,
I can't open a PP project without this error message appearing:
"The preset used by one or more sequences in this project requires third-party components that could not be located. These sequences will be modified to use a custom sequence setting instead. To continue editing using the original preset, quit the application without saving the project, reinstall any third-party components that are required and reopen the project".
What I had been doing before this occurred was editing a PP project using ProRes sequences and multi-camera editing. Multi-camera was not working very well and after a few attempts to fix that I gave up and finished the job cutting 3 layers of video instead. AME refused to render the three finished sequences of over 1hr duration so rendered final videos from the PP sequences.
I tried deleting plists for AME, PP and QT, repairing disc permissions and rebooting but there was no improvement.
Client is satisfied for now but will want to come back to this job at a later date so decided to uninstall and re-install AME and PP in the hope both would be ready to work properly when needed again. AME works fine in conjunction with a different PP project but now I can't open the PP project in question without the above error message appearing.
Having searched the net it would seem that the problem may be caused by ProRes but I haven't been able to find a definitive solution for the problem. Does anyone know either:
1. How to fix this?
2. If I chose the "modified using a custom sequence setting", can I be sure that my sequences will look the same even if they don't use ProRes? The final deliverable format will be mp4 so as long as the overall look doesn't change then I can afford a change in the edit codec. It's just that with three sequences over an hour long, I don't want days of work to be ruined.
Other older PP projects of mine open and work fine.
Premiere Pro CC 8.2.0
Media Encoder CC 8.2.0.54
OSX 10.10.2
Any help would be greatly appreciated.
Duncan.

Adobe web chat come up with a solution.
Open the PP project.
Export your sequence or project as a Final Cut Pro XML file.
Set up a new PP project.
Import the Final Cut Pro XML file.
This will get you back up an running.
Since getting back to editing this project I have found that some things will be lost or change in using XML:
You will lose position key framing, black video clips, dissolve fx, audio levels, audio dynamic fx, the ability to open a multi camera clip and change the camera view.
You will keep cut points, crop fx.
Not perfect but only took a couple of hours to save 3 days work.

Library Lost - Please HeIp I tried updating my old ipod & now all 10,000 songs in my library have an ! next to them and I get the error message "song " " could not be used because the original file could not be found" on every song I try to play

Please help - this morning I tried updating one of my old ipods for my wife (this ipod hasn't been updated in 2-3 years). I plugged it into my pc, it was recognized and the software updated. I created a new playlist and tied to sync the ipod. This ipod had never been used on this pc/itunes since the pc is only 2 years old. When I tried to sync the ipod it stated that it would have to erase all the old songs on the ipod prior to syncing. I clicked ok and it proceeded to wipe out the old ipod and sync the new playlist (~1000 songs). When the sync was complete there were only 6 songs from the new playlist (all purchased this morning from itunes) on the ipod and to my horror all ~10,000 song on my pc in itunes now have a ! next to them. Only my recent purchases from itunes do not. When I click on a song with the ! I get the error message "the song " " could not be used because the original file could not be found." How do I correct this issue - I am scared to hook my ipads or other ipods to my pc for fear of losing everything?!?!? I spent 100s of hours burning the 10,000 songs from my cd collection and do not want to have to do it again.
Any help is greatly appreciated.

This "original file cannot be found" thing happens if the file is no longer where iTunes expects to find it. Possible causes are that you or some third party tool has moved, renamed or deleted the file, or that the drive it lives on has had a change of drive letter. It is also possible that iTunes has changed from expecting the files to be in the pre-iTunes 9 layout to post-iTunes 9 layout,or vice-versa, and so is looking in slightly the wrong place.
Select a track with an exclamation mark, use Ctrl-I to get info, then cancel when asked to try to locate the track. Look on the summary tab for the location that iTunes thinks the file should be. Now take a look around your hard drive(s). Hopefully you can locate the track in question. If a section of your library has simply been moved, or a drive letter has changed, it should be possible to reverse the actions.
Alternatively, as long as you can find a location holding the missing files, then you should be able to use my FindTracks script to reconnect them to iTunes .
tt2

I recently reset my computer and copy my music from an external hard drive to my itunes library. When I click on a song to play i get an error message that says " the song could not be used because the original file could not be found". need help

I recently reset my computer and copy my music from an external hard drive to my itunes library. When I click on a song to play i get an error message that says " the song could not be used because the original file could not be found". But when I have my external hard drive plug in the song will play with no problem. What do I need to do to play my music without having the external harddrive plug in ???????? Please help

Because the location for each song in your library is on your hard drive. If the hard drive isn't there, how can iTunes play it?
You'll have to move/copy the music from your hard drive to your computer's hard drive.
Basically, EASIEST way to do all this, if you don't care about your play counts, etc...
-Delete EVERYTHING from iTunes, so that your library is now empty.
-Go to "Advanced" inside of the "Preferences" window, found in the "Edit" drop-down. You can also access Preferences by pressing Ctrl+, (Press Ctrl and the comma key)
-Change your iTunes Media Folder Location to something simple, but on your computer. I use C:/iTunes. Make sure "Keep iTunes Media Folder Organized" and "Copy files to...." are both checked. You can close Preferences now.
-Now, drag and drop your music from your hard drive into your iTunes library. iTunes will automatically add the music to your library, as you would expect, and also creates a copy of each file to place into that iTunes Media Folder you just created.
Shouldn't have any more problems...

I have a new hard drive as my old one crashed. Everything seemed to transfer fine except for my entire iTunes library. It shows all of my old songs, but when I click on one it states "the song could not be used as the original file could not be found

I have a new hard drive as my old one crashed. Everything seemed to transfer fine except for my entire iTunes library. It shows all of my old songs, but when I click on one it states "the song could not be used as the original file could not be found.would you like to locate it".
Either how do I locate it, and I've tried every trick I know, or how do I restore all of my songs from one of two sources. I have my old hard drive backedup on an external drive which should have all of my songs, and I have most of my songs on my old iPhone 3S which I'm using as a backup iPod.

The "missing file" error happens if the file is no longer where iTunes expects to find it. Possible causes are that you or some third party tool has moved, renamed or deleted the file, one of its parent folders, or the drive it lives on has had a change of drive letter. It is also possible that iTunes has changed from expecting the files to be in the pre-iTunes 9 layout to post-iTunes 9 layout, or vice-versa, and so is looking in slightly the wrong place. In the case of a library moved from one system to another there are also potential permissions issues. See Repair security permissions for iTunes for Windows.
Select a track with an exclamation mark, use Ctrl-I to Get Info, then click No when asked to try to locate the track. (Due to a bug in iTunes 12 you currently have to say No twice!) Look on the summary tab for the location that iTunes thinks the file should be. Now take a look around your hard drive(s). Hopefully you can locate the track in question. If a section of your library has simply been moved, a folder renamed, or a drive letter has changed, it should be possible to reverse the actions. If the difference between the two paths is an additional Music folder in one path then this is a layout issue. I can explain further if that is the case.
In some cases iTunes may be able to repair itself if you go through the same steps with Get Info but this time click Locate and browse to the lost track. It may then offer to attempt to automatically fix other broken links.
If another application like Windows Media Player has moved/renamed the files then the chances are that subtle differences in naming strategies will make it hard to restore the media to the precise path that iTunes is expecting. In such cases, as long as the missing files can be found somewhere, you should be able to use my FindTracks script to reconnect them to iTunes. See this post for an explanation of how it works.
See also Recover your iTunes library from your iPod or iOS device.
tt2

The TV show could not be used because the original file could not be found

"The TV show “Blah-blah ep.23” could not be used because the original file could not be found. Would you like to locate it?"
I know this problem is listed (and unanswered) from quite a few users in the forums for song files, but I haven’t found any that mention TV shows. To add to the heap, and help emphasize to iTunes that this is a major bug in need of fixing, here is my version of this problem.
I have a variety of season passes to TV shows that normally download on almost a daily basis (The Daily Show with Jon Stewart, for example). About once every four or five downloads iTunes decides to silently delete a file. No warning given, no chance to stop it, just gone. ITunes downloads the file (clearly seen in the process in the Downloads part of the Store menu) and then lists the file under its correct menu in the TV Shows Library section (with the correct amount of MB listed for the file). I usually watch the episode right after I download it (with no problems), but of course I have left episodes unwatched when I shut iTunes down.
On the next startup of iTunes, I go in to watch an old episode again or click on an unwatched episode, but it isn’t there anymore and the old “would you like to locate it?” message pops up. After being through this at least a dozen times in the last year, I know there is no point in looking for the file because it’s gone. The only choice is to go into iTunes support and ask them to reset the download, which they’ve always done without question, and then I have to download the file all over again. This is a huge hassle and all the more frustrating because it happens so irregularly.
I’ve tried to find answers in these discussion forums, but have been unable to see any reasonable solution and wish to add to the voices of annoyed paying customers in the hope something will be done. If anyone is interested, the bizarre and time consuming workaround I’ve had to employ is:
1. As soon as any of my TV shows are downloaded, I stop whatever I’m doing to go grab the file out of iTunes’ folder and move it to a location where iTunes can’t get its grubby little silent deleting hands on it.
2. On the next shutdown-startup cycle, I can then go back and move the file back into its correct location in the iTunes TV Shows subfolders and I’ll never have a problem again with THAT particular file being deleted.
Of course, the problem with this solution is that it’s painfully annoying to have to do it every time. I get lazy, iTunes seems to get its evil deleting ways under control and downloads all seem to work again. That is, until they don’t and the issue mysteriously returns with files being picked off anew and I have to return to these forums in the hope of finally finding out why this is happening. After more than a year and two or three iTunes version updates, it’s the problem that just won’t die.
Anyone?

Yes, only TV shows. I've never had a random silent delete of a song file. I also considered that Windows might be blocking the file to save space, but with no limitations set in the control panel that isn't the problem either. In fact, I've only had this problem with season pass downloads. It's never happened with a single download of a video or TV episode.
Tonight, when I downloaded my Daily Show episode, I really kept tabs on what the heck iTunes is up to during the process. As many know, iTunes creates a folder called Downloads during the download process. Inside that folder, a video file gets downloaded as “download.m4v” along with another Qtime info file. When the download is complete, iTunes is supposed to use the info file to identify and tag the download.m4v file and then move it over into its correct artist subfolder with the correct file name.
The problem, I discovered tonight in watching this process, is that iTunes (for mysterious reasons) does not do the relabel/move step with some of the downloads and leaves the files in situ as download.m4v in the download file. Additionally, in the iTunes software you can click on the file (correctly labeled and appearing, as I said in the first post, under the correct TV show banner) and watch it one time. However, after shutting down and restarting (and this is where the evil happens) iTunes will delete all files in the Download subfolder as part of a cleanup process. I suppose because it assumes that those files were correctly relabeled and copied into the corresponding TV show folders. So, there is the reason for the loss of downloaded video files (in my case).
There appears to be no way of knowing, from within iTunes, when the file has been correctly copied over to its corresponding folder and when it hasn’t and remains in the Bermuda Download Folder of Death. Again, I have to go into that folder each time (before shutting iTunes down) to make sure the move took place. If it didn’t, then I have to make a copy of the download file and place it outside that folder.
Finally, since this only happens occasionally, I’m wondering if it doesn’t have something to do with the way the info file is being tagged and labeled prior to being made available to download. However, if that were the case then the problem would be happening to lots of users and I would have expected a lot more complaints in the forums.
By the way, I’m not big on fidgeting with any of iTunes folders or settings. It hasn’t been the case where the downloads were fine, I made some goofy change to the folder structure and then it doesn’t work. I haven’t fiddled with the settings for months, but all of the sudden this issue starts to appear and can just as easily disappear in the following week’s downloads.
Still seeking answers or advice.
Cheers.

After installing iTunes 10.5 update i get the following message when trying to play any song in my Library "The song could not be used because the original file could not be found. Would you like to locate it?" how do i fix this??

I have an iPod Classic and work on Windows 7.
i recently installed iTunes 10.5 update and since then i cannot play any of the songs in the Library - i get the following message
"The song could not be used because the original file could not be found. Would you like to locate it?"
what happened to all my songs (almost 2000) How can i get them back into my music library?
Please help - i do not want to spend another week downloading all my cd's onto my computer !!!!!

Try my script FindTracks. Select a few of the missing files to start with then run the script. Choose No at the first prompt so that you can check how it works track by track, then confirm or edit the location of the media folder where your files are. Once you are happy with how it behaves let it process larger numbers of tracks automatically.
tt2

ITunes tells me "Could not be used because the original file could not be found. Would you like to locate it?" I can locate it and all my other music, but can only open one song at a time. How do I set it to open all my music whenever I want it?

iTunes tells me my song selection: "Could not be used because the original file could not be found. Would you like to locate it?" I can locate it and all my other music, but can only open one song at a time. How do I set it to open all my music whenever I want?
Message was edited by: Woildbill

I just spent several hours dealing with this when switching to a new PC. It was extremely frustrating as I knew my files were on my external HD but no matter how many times I copied my old iTunes folder over the files were still missing...because dummy me had forgotten to "unhide folders" on my new PC and my old files were actually stored in a hidden folder created long long ago.
This is how I did it on Windows 7 with iTunes 10
1. Look in iTunes Advanced Preferences to see where iTunes is saving files. (Edit, Preferences, Advanced)
Example: C:/Users/Woildbill/My Music/iTunes/Music
2. Ensure you are able to see hidden files - Control Panel, Folder Option, View, Show Hidden Files
3. Use Your Computer's Search Function to Locate the Missing File (Start, Search, type name of song - I started my search in "My Music" folder but be sure to expand to entire Computer if not found right away)
4. In Search Results, right-click found folder and select properties. This will tell you where the file is actually stored.
5. Use Windows Explorer (right-click start) to navigate to the location of the file. It is likley your other missing files are in the same location.
6. In Windows Explorer, copy the newly located files to the iTumes location from Step 1 and everything should work again.
Hope this helps!

Recently bought a new computer and all my music appears in iTunes as well as on my computer in a saved folder. When I try to play the music in iTunes I get an error that reads"the song could not be used because the original file could not be found."

Recently bought a new computer and all my music appears in iTunes as well as on my computer in a saved folder. When I try to play the music in iTunes I get an error that reads"the song could not be used because the original file could not be found. Would you like to locate it?" Hope you can help me solve this issue.
Thanks,
Shellyboo

This happens if the file is no longer where iTunes expects to find it. Possible causes are that you or some third party tool has moved, renamed or deleted the file, or that the drive it lives on has had a change of drive letter. It is also possible that iTunes has changed from expecting the files to be in the pre-iTunes 9 layout to post-iTunes 9 layout, or vice-versa, and so is looking in slightly the wrong place.
Select a track with an exclamation mark, use Ctrl-I to get info, then cancel when asked to try to locate the track. Look on the summary tab for the location that iTunes thinks the file should be. Now take a look around your hard drive(s). Hopefully you can locate the track in question. If a section of your library has simply been moved, or a drive letter has changed, it should be possible to reverse the actions.
Alternatively, as long as you can find a location holding the missing files, then you should be able to use my FindTracks script to reconnect them to iTunes .
tt2

The song could not be used because the original file couldn't be found

About a week or two ago I loaded up my iTunes to find that most of my music could not be played. Upon clicking on the songs I got the message "The song '__' could not be used because the original file could not be found. Would you like to locate it?" This was weird because none of my music was missing from my computer and it was in the same file location that it has been in all along. I went into the preferences and noticed that the iTunes media file location was different and I changed it back to what it was before. This helped with about half of the files but I still have about 1500 that I will have to "locate" in order to play. This is a solution, but unfortunately it is very time consuming. Does anyone have a solution that could ultimately fix this and save me the time?
Thanks,
Stunray
Message was edited by: Stunray

*Adding new items/removing orphans*
Try iTunes Folder Watch or iTunes Library Updater. Folder Watch is much faster on the adding files front, can be set to run in the background and includes a useful exclusion feature, however it’s really slow at removing orphans. iTLU is better for this although doing it manually after looking at a list of proposed removals generated by Folder Watch is probably faster still. iTLU can also be set to update iTunes when you've used 3rd party tools to change tag info.
tt2

Song could not be used because file could not be found

I recently had to purchase a new computer which came with the new Windows Vista. I had Windows XP before and from that computer I backed up ITunes on external hard drive. I have authorized this computer and installed Itunes and added the music back to folder. I can see all the music but I cannot play them due to the error song could not be used. I am having problems with the IPod and need to hook it up to computer to reset it. I am afraid it will mess up. What do I need to do? How can I get the music to play in library and if I hook up IPod will it mess it up more? Thanks for any help!!

I'm an Apple N00B and would be nice to see this answered (by Apple or someone that knows whats going on) - I realize this is a public forum, but in Googling "song could not be used because file could not be found" you (and me!) are not the only ones having this problem -
My situation is, that I BOUGHT a song from iTunes last night, it synched to my iPod OK - but in going thru iTunes today, I see the bang "!" next to the song... and not knowing all the icons yet for iTunes - it gives me that error - Saying it can't locate the song - would you (me) like to find it? - Yes, I BOUGHT it so would be nice to HAVE...
Point being, it IS on my iPod Classic - but is not on my PC??? How is this possible -
Furthermore - Since I bought it - and obviously I have it on my iPod now, but somehow is now "lost" on my PC (iTunes folder shows empty - for that song) - You'd think that either iTunes would be SMART enough to pull it from my iPod and save it to the folder (as the Album art shows in iTunes too???!) - Or that iTunes home page would recognize the "sale" and the "missing" song, and re-download it?? W-T-F Apple?
FWIW, for grins, I went back and tried to re-download the missing song - and was eager to SELL it to me again...
Again, I'm new to Apple and iTunes - so maybe there's a quick and easy fix for this - Yeah yeah - call me a Windows idiot - but suspect I'm not alone with this problem... or that it's not just a Windows issue -
Any thoughts?
TIA -
MFX
Message was edited by: MalteseFalconX

Adobe XI when i use signature option i try to use rectangle, it gives option of certificate signature, does not give me webcam or digital signature or any other option to sign

when i use signature option i try to use rectangle, it gives option of certificate signature, does not give me webcam or digital signature or any other option to sign, have downgraded to Adobe X, no options show. Have upgraded back to XI no change. Free software I am using currently.

There are two types of signatures in PDF: electronic signatures, which are just images (stamps, text, image) and digital signatures.
If you want to use electronic signatures in Acrobat XI go to Fill&Sign->Place Signature. If a drag rectangle for the digital signature dialog comes up, you have selected digital signatures and Acrobat/Reader remembered it. Cancel it, go back to Fill&Sign->Place Signature and click a triangle to the left of "Place Signature". Then click on "Changed Saved Signature" and select the electronic signature type you want to use.
If you want to use digital signatures you can create custom digital signature appearance. Go to Edit->Preferences->Signatures->Creation&Appearance->More. In the "Appearances" section click "New". You will be presented with the dialog that allows you to create a custom appearance. If you want to put there your picture or image of your ink signature, you need to prepare this image as a file beforehand, select "Image" radio button, browse to the location of your image file. In Reader you can use only PDF as your image file. In Acrobat you can use many more file formats: JPEG, PNG, etc.

When I double click on a song in my iTunes Library i receive the following: the song "....." could not be used because the original file could not be found. Would you like to locate it?

Greetings all
When i double click on a song in my iTunes library the following appears:
The song "......" could not be used because the original file could not be found. Would you like to locate it?
Hope you can help
revds

This happens if the file is no longer where iTunes expects to find it. Possible causes are that you or some third party tool has moved, renamed or deleted the file, or that the drive it lives on has had a change of drive letter. It is also possible that iTunes has changed from expecting the files to be in the pre-iTunes 9 layout to post-iTunes 9 layout,or vice-versa, and so is looking in slightly the wrong place.
Select a track with an exclamation mark, use Ctrl-I to get info, then cancel when asked to try to locate the track. Look on the summary tab for the location that iTunes thinks the file should be. Now take a look around your hard drive(s). Hopefully you can locate the track in question. If a section of your library has simply been moved, or a drive letter has changed, it should be possible to reverse the actions.
Alternatively, as long as you can find a location holding the missing files, then you should be able to use my FindTracks script to reconnect them to iTunes.
tt2

I get the following message on certain songs in my library: the song could not be used because the original file could not be found

I get the following message on several songs in my library: the song could not be used because the original file could not be found. How can I download these songs to my new iPod?

This "original file cannot be found" thing happens if the file is no longer where iTunes expects to find it. Possible causes are that you or some third party tool has moved, renamed or deleted the file, or that the drive it lives on has had a change of drive letter. It is also possible that iTunes has changed from expecting the files to be in the pre-iTunes 9 layout to post-iTunes 9 layout,or vice-versa, and so is looking in slightly the wrong place.
Select a track with an exclamation mark, use Ctrl-I to get info, then cancel when asked to try to locate the track. Look on the summary tab for the location that iTunes thinks the file should be. Now take a look around your hard drive(s). Hopefully you can locate the track in question. If a section of your library has simply been moved, or a drive letter has changed, it should be possible to reverse the actions.
Alternatively, as long as you can find a location holding the missing files, then you should be able to use my FindTracks script to reconnect them to iTunes .
tt2

Tab "A CERTIFICATE NO" found not editable using tcode J1IGA

Similar Messages

Maybe you are looking for