Tab bar is ~6px bigger with multiple tabs than it is with only one tab

Example:
I open a new FF window. One tab is open.
I open a second tab. The tab bar now gains approx. 6 pixels in height. It shrinks back if I reduce the number of tabs I have open to 1.
This is annoying. Is there anything that can be done about it?
I've already tried fiddling with userChrome.css based on a Google search, but since I don't know what I'm doing I haven't had any luck in stopping this from happening.

The close-button is present even if only one tab is open thanks to the "Last tab close button" addon which I have installed.
Speaking of add-ons... I found out the problem disappears if I disable the Oxygen KDE add-on I have installed (probably should have tried disabling all add-ons first.... sorry!). However, the issue may still stand: I noticed that even without add-ons, if I close the last tab (with your setting in place), the FF tab bar shrinks by those same 6px.
So I think what I'm needing is a way to make a tab bar with 0 open tabs the same height as a tab bar with 1+ open tab. I'm fairly confident that such a setting would automatically resolve the problem I turn out to be having with the Oxygen KDE add-on as well.
Either way, it's probably best to take this issue up with the Oxygen KDE devs - correct? I'm terribly sorry if I've wasted your time.

Similar Messages

I get two tabs with my identical home page every time I open Firefox. How do I "unpin" one of them so that only one tab is populated when I open Firefox?

When I installed Firefox I inadvertently responded "yes" when asked if I wanted to "pin" my home page to the browser. l also designated that page (my Juno page) as my home page. So now whenever I open Firefox, two tabs appear with my identical home page. How do I fix it so that only one tab appears when I open Firefox?

Its not my home page, Like I said, I hae my home page also come up in a different tab (google) I also get the welcome to FF4 on a seperate tab. My home page is set to google. But I dont want the welcome screen to pop up

Had problem with DSL, now have only one tab with favicon matching that tab.

After a storm I had a problem with my U-Verse DSL. I lost access and got a message that it may be due to a problem with the filters on my phones, fax or satellite box. I disconnected all the items that had filters. I was then able to click on a link that AT&T had sent on the message and I got a response, I previously could not get a response because I had no connection. I got pack to the pages on all my tabs by hitting the back arrow on each one. I now have only one tab with favicon matching this WEB site for that tab, the rest all have the AT&T globe. I tried refresh and also opening a new tab and then going to one of the sites.
This problem is on a different PC that the one I am on now. It has version 21, and is Window 7 Home Premium. I have pasted the trouble shooting info from that PC.

Hello,
Many site issues can be caused by corrupt cookies or cache. In order to try to fix these problems, the first step is to clear both cookies and the cache.
Note: ''This will temporarily log you out of all sites you're logged in to.''
To clear cache and cookies do the following:
#Go to Firefox > History > Clear recent history or (if no Firefox button is shown) go to Tools > Clear recent history.
#Under "Time range to clear", select "Everything".
#Now, click the arrow next to Details to toggle the Details list active.
#From the details list, check ''Cache'' and ''Cookies'' and uncheck everything else.
#Now click the ''Clear now'' button.
Further information can be found in the [[Clear your cache, history and other personal information in Firefox]] article.
Did this fix your problems? Please report back to us!
Thank you.

After reverting to Firefox 3.6 I have lost the ability to close a webpage (down to an empty tab) when I have only one tab open. Where did the little "x" go on the single tab???

I like to be able to close the webpage I am viewing when I am finished, when there is only one tab open, so that Firefox is empty when I next want to browse the web. After upgrading to 5.0 and finding I hated it, I downgraded back to 3.6 and now the little "x" on the single tab is gone. It still appears when I have multiple tabs open, but not when there is just one. What happened? How do I get it back?

Thank you, but I already have "always show tabs bar" set.
Also, I have two computers and the other is running the exact same version of Firefox, and the exact same theme, but it does not have this problem.
To make sure I'm being clear: there is an "x" on each tab that allows me to close it when I have multiple tabs open. When I have only one tab open, there is no "x"; so in order to close the webpage I have to open another empty tab, and then close the first. My other computer has the "x" to close the tab visible even when there is only one tab so that I can close the page and have an empty (marked "(untitled)" tab). Please help!

How to have a close tab button when you have only one tab ?

I'm using FF 24.0 on Win 7 enterprise x64.
I would like to have an option to have a close tab button ("x") when you have only one tab.
Is this possible ? How ?
If not how to submit a feature request ? I did it 10+ times with feedback but didn't see any change.
Thanks

Thanks again for the "close button" addon advice. I tried it but no luck, the close button doesn't appear on tabs but in the toolbar (which I do not display).
So the problem remains for me.

RegionRenderer encodeAll The region component with id: pt1:r1 has detected a page fragment with multiple root components. Fragments with more than one root component may not display correctly in a region and may have a negative impact on performance.

Hi,
I am using JDEV 11.1.2.1.0
I am getting the following error :-
<RegionRenderer> <encodeAll> The region component with id: pt1:r1 has detected a page fragment with multiple root components. Fragments with more than one root component may not display correctly in a region and may have a negative impact on performance. It is recommended that you restructure the page fragment to have a single root component.
Piece of code is for region is:-
   <f:facet name="second">
                                            <af:panelStretchLayout id="pa1"
                                                                   binding="#{backingBeanScope.Assign.pa1}">
                                                <f:facet name="center">
                                                    <af:region value="#{bindings.tfdAssignGraph1.regionModel}" id="r1"
                                                               binding="#{backingBeanScope.Assign.r1}"/>
                                                </f:facet>
                                            </af:panelStretchLayout>
                                        </f:facet>
How do I resolve it ?
Thanks,

Hi,
I see at least 3 errors
1. <RegionRenderer> <encodeAll> The region component with id: pt1:r1 has detected a page fragment with multiple root components.
the page fragment should only have a single component under the jsp:root tag. If you see more than one, wrap them in e.g. an af:panelGroupLayout or af:group component
2. SAPFunction.jspx/.xml" has an invalid character ".".
check the document (you can open it in JDeveloper if the customization was a seeded one. Seems that editing this file smething has gone bad
3. The expression "#{bindings..regionModel}" (that was specified for the RegionModel "value" attribute of the region component with id "pePanel") evaluated to null.
"pageeditorpanel" does seem to be missing in the PageDef file of the page holding the region
Frank

I want to display a url link in only one tab of the tabstrip in webdynpro ?

I want to display a url link in only one tab of the tabstrip in webdynpro view? How do we do this?

so in that tab of the tabstrip use LinkToUrl UI
The LinkToURL UI element is a hypertext link. When you choose this link, you are directed to a user-defined Web resource (URL).
The LinkToUrl is used to exclusively to open URLs in a separate window. To leave the Web Dynpro application and display a new URL use an exit plug.
1.in ur UI create tabs as u desire
2. In each TAB , add ViewContainer . ViewContainer you would be able to add inside tab.
3. Now create as many views as you have created Tabs.
4. Embed views into the corresponding ViewContainers , in ur first view embed link to URL
refer SAP online help for tabstrip :
http://help.sap.com/saphelp_erp2005/helpdata/EN/e8/ac884118aa1709e10000000a155106/content.htm

Whenever I click on a link with the middle-mouse button, it opens multiple copies the link instead of only one (Version is 4.0.1).

Whenever I click on a link with the middle-mouse button, it opens multiple copies the link instead of only one (Version is 4.0.1). I have checked the mouse in other browsers and it doesn't behave oddly in them.

Does that happen if you {Ctrl + Click} the same hyperlinks?

HT4993 i been having sim card problems with my iphone 5. am i the only one?

i been having sim card problems with my iphone 5. am i the only one?

Hello,
I'm also had problems with Iphone 5 , it read no sim card, i solved problem by removing sim card and cleaning with alcohol and q-tip and installing back.
Shut down phone.
On the side of phone , you will see a small pin hole, insert paper clip and sim card will come out, be careful to do it over a clean towel as not to let drop on floor, make sure your hands clean while doing this.
Insert sims card back and turn on, it should work again.
Good Luck.

I would like to have the same tabs open when I reopen Firfox, how can I set this in Firefox, it is reopening with only one tab not multiple tabs

I want to close Firefox with multiple tabs and reopen with the same multiple tabs, how do I do this?

Based on the info above i think this article might help. </ br> [[Session Restore#w_configuring-session-restore]]

How do I get firefox to open with only one tab I accidentally saved when I had more than 1 tab open now it opens too slowly and I want to change it back

when I first installed and used firefox I went to close and did not realize that I had an additional tab open and it asked me if I wanted to save I clicked the yes when I meant to not save. Now I can not find anywhere that will let me unsave the extra tab so that it will not open everytime I open firefox

If you only have the Firefox button then press F10 to get the Menu Bar or go to Firefox > Options > Options > General > Startup
See also [[How to set the home page]]

Everytime that I open firefox it automatically opens 4 tabs to websites that i visited. I cleared the history several times but the same result. How do I change FF to open only one tab?

When I open and close FF it normally opens one tab but for the past 3 months it automatically opens four tabs. One tab I have set to the yahoo home page. I visit three other sites on a regular basis and I open tabs for each site. This started with FF 4.01. The other sites are Gmail, NYtimes.com, NYpost.com. On the NY post site it opens to an old article from April 3, 2011.

When I open and close FF it normally opens one tab but for the past 3 months it automatically opens four tabs. One tab I have set to the yahoo home page. I visit three other sites on a regular basis and I open tabs for each site. This started with FF 4.01. The other sites are Gmail, NYtimes.com, NYpost.com. On the NY post site it opens to an old article from April 3, 2011.

Pull a zip file with multiple files unzip it, and finally load one of the f

Hi Aill,
I have following query.
Could we do the following with XI: pull a zip file with multiple files from a vendor which resides outside of XI server network, unzip it, and finally load one of the files to SAP?
Regards
Rohan S

Hi Varadharajan,
I have 10 text files in some ZIP file on one server which is out side of network. We can reach that file through Proxy only to read ZIP file.
I need to extract the file and on the bases of some condition one of the file i need to upload data to SAP.
Is it possible. If possible then How?
Regards

Multiple devices showing in iTunes when only one device is plugged in

How come multiple devices show up in iTunes left-hand DEVICES column when I plug in only one device? When I plug in my iPhone, two of the same devices by the same name show up in the left hand column within iTunes, ALONG with two other iPhones in our family. Can anyone offer insight please? Thank you in advance!

You may have enabled wifi sync on your iPhone.

Multiple rollover areas on a slide, only one works

Hi all,
Long time reader, first time poster. I have been looking through all the forums and can't find a solution for this issue.
I have a slide with six rollover captions, arranged in two rows of three. Beneath each rollover caption is a regular caption containing a statement; the viewer is intended to mouse over the statement, and the rollover will pop up a caption saying whether the statement is true or false. After ten seconds a button appears and pauses the slide, and the viewer can click the button to go to the next slide.
When I preview the project, only the top left of the boxes works right away as intended. Then after ten seconds, the button appears, and the other five start working just fine. One weird thing is that during that first ten seconds, the mouse cursor still changes to a hand icon on all of the rollovers, so it recognizes that they are there, but nothing pops up.
The issue seems to have to do with the button, but I have tried adjusting its timing, its order in the layer stacks, I have tried deleting the button, I have tried copying all the elements except the button to a new slide, and I'm still getting the same problem, and the buttons start working properly at the ten-second mark regardless of where the button is. All the rollover captions and rollover areas have identical properties as far as I can tell. The rollover areas are at the top of the layer stack, and are not overlapping. The top left (on the stage) is always the only one that works properly, no matter how I arrange them in the layer stack.
I have tried everything I can think of. Now I humbly turn to you. Shot of my timeline below. Thanks in advance!
-JB

Are there any objects on earlier slides that are set to Rest of Project that might be overlapping your hit areas on this slide?
For example, something that caused a similar issue once was having a widget on an earlier slide. The widget in question (Adobe Course Companion) was set to Rest of Project and ended up obscuring the hit area of interactive objects on later slides. Not sure if this helps, but if you were able to paste these Smart Shapes into a different single slide project and they still didn't work there, then my idea probably wouldn't be an issue either. This might be one of those issues that only happens on a MAC.

Tab bar is ~6px bigger with multiple tabs than it is with only one tab

Similar Messages

Maybe you are looking for