Tab control

Hi all,
I have a tab control with 3 tabs. I was wondering how I can do the following:
1. I want to show only 1 page of the tab control without the tab header name when i start the program.
2. When i hit ctl + shft + , I would like my tab control to display all 3 tabs with the header.
3. When i hit ctl + shft + , I would like my tab control to display only the first tab with no header.
Has this ever been done? Can it be done?

Sure. It doesn't do exactly what you want but should be simple to modify. To control individual tabs, you use the read only property pages. This returns an array of references. You use an index array function to get a specific page. For example, if you want to manipulate page two, index element 1 of the pages property. The returned reference can be used to create properties for just page 2.
Attachments:
tab.vi ‏29 KB

Similar Messages

  • Save the selected value from listbox with its respective tab control dropdown selcted values in another listbox

    Hi all,
    I am making a vi where I have to save the selected value from listbox with its respective tab control dropdown selcted values in another listbox.Whenever I select Item1 then the heading change and respective tab will open for that item.But Now I just want to save the selection and put it in another ListBox.SO that I can renmove or add according to my wish. Plz help me.
    Solved!
    Go to Solution.
    Attachments:
    my_vi.png ‏83 KB

    Hi, I successfully make the vi to insert itmes from listbox1 to listbox2.Whenever I select itmes 1 in listbox 1 it display same elected item in listbox2 , but it not appending the items in listbox2.Like If 1 is selected in listbox1 then 1 will display , next time after saving when I selct next item like 3 then in listbox 2, 1 is replaced by 3,it dont come in second row of listbox2.Hope I am able to explain.\
    Plz help me to resolve this.
    Attachments:
    listbox_update.vi ‏11 KB

  • How can I set the tab order of text box controls on each page of a tab control?

    I need to be able to select the tabbing order of individual controls on a single page of a tabbed control. How??

    In LV 6.1 an up you should be ablel to right click on the edge of the tab control when the tab-page in question is selected.
    The bttom selcetion in the pop-up is "Reoder controls in page..."
    selecting this option will switch editing modes to allow you to specify the ored, just like in a cluster.
    I seem to remeber in older versions you had to drag the tabable controls off the tab control, specify the tabbing oder and then drag them back on. The oldest version I have on this machine is 6.1 so that all I can speak for at the moment.
    I hope this helps,
    Ben
    Ben Rayner
    I am currently active on.. MainStream Preppers
    Rayner's Ridge is under construction

  • Can you print all the tab control's contents and include the tabs?

    We are trying to generate a report that includes the contents of a tab control (graphs, text).  Using the Append Control Image to Report.vi, we are only able to print out the active tab and the tab is cut off of the image. How can we generate reports that include all the tab pages and their contents and include the labeling tabs?
    Thanks in advance.
    Jim

    I do have a workaround for makinging the prints but it looks like some sort of cropped screensave that cuts off the tabs.  In my sample I was printing out 3 of the tab controls and you can see there are three by the cut off tabs.  Is there a setting to allow for more of the graph and its surroundings to be "captured"?
    Attachments:
    Document.pdf ‏53 KB
    Document (2).pdf ‏51 KB
    Document (3) (2).pdf ‏58 KB

  • How can I Create a exe file were a tab control on it work`s

    I have a VI with many controls and indicators,these are spread on a tab control.This tab control works with out any problems but if i create a exe file then the tab control is fixed. How can I create a exe file so that the tab control on it work´s ?"
    Attachments:
    project7.1.jpg ‏129 KB

    Make the tab control a control and not an indicator. If you want to write
    to it you need to create a local variable.
    "Carlos-R." wrote in message
    news:[email protected]..
    I have a VI with many controls and indicators,these are spread on a
    tab control.This tab control works with out any problems but if i
    create a exe file then the tab control is fixed. How can I create a
    exe file so that the tab control on it work´s ?"

  • How can I create a exe file with a tab control on it that work´s ?

    I have a VI with many controls and indicators,these are spread on a tab control.This tab control works with out any problems but if i create a exe file then the tab control is fixed. How can I create a exe file so that the tab control on it work´s ?

    I have made a new Posting with the same question but this time I added a screenshot of the VI.
    Attachments:
    project7.1.jpg ‏129 KB

  • Data Origin Types not filled in the tab "Control Data" of BP interface

    Hello experts,
    I have loaded the clients from ECC6.0 to CRM 4.0.
    Before I have loaded the clients I have maintained the data origin type for the BP in spro -> cross application components -> SAP Business Partner -> Business partner -> Basic settings -> Data Origin -> Maintain Data Origin Type.
    After I have done the load initial of clients, the field  "Data Origin" is empty in  the tab "Control Data" in BP interface. If I do F4 in the field appear the configuration that I did in spro appear.
    For this field will appear filled I'll need to do more configurations in spro?
    Best regards,
    Mary

    Hi Mary,
    The middleware does not fill this field in BP master data. You can maintain data origin type in SPRO, however the mBdoc does not use this customizing in order to fill this field.
    Please try to use the BADI CRM_DATAEXCHG_BADI in order to fill this field during master data download.
    It hope it helps.
    Regards,
    Gabriel Santana

  • Horizontal tabs when they are on the left side of tab control

    I have a tab control for a touch screen where I was going to use buttons along the left side to change tabs, and hide the tabs. However, I realized I can put the tabs on the left side of the tab control and remove my buttons all together. Only issue is, I would like them (along with their font) to be horizontal, not vertical as they are shown in my screenshot. Is there a way to change this?
    CLA, LabVIEW Versions 2010-2013
    Solved!
    Go to Solution.
    Attachments:
    touchscreen.PNG ‏118 KB

    It's a really poor design aspect of tab controls that the text is sideways when the tabs are on the left or right side.
    I've looked into it and found no way to re-orient the text.
    However you can put images on the tabs instead of text, and the images can be of text (correctly oriented of course).
    The attached code can be used to generate such a tab control.
    Attachments:
    Create_Good_Tab_2.llb ‏98 KB

  • How to hide a tab in a Tab Control by Property Node?

    Hi,
    I have a Tab Control in my Front Panel. So, using a array of LEDs, I would like to hide some tabs, probably using Property Node functions, but I can't find what option do it. Is it possible?

    Thanks Macro!  I came to the forum to find a solution for this exact problem, it's nice to find it already laid out for me so clearly. 
    -Joe

  • Using a jQuery list box placed onto a tab control doesn't seem to work for posting?

    Hello,
    I developed a U.I. in Dreamweaver for a  product and have several list boxes that use the onChange modifier to collect what the user selects from the list. I use the onChange=this.form.submit() function to grab the user's selection from the list box..
    When this dropdown list box code is placed onto a form, it posts properly and I can retrieve the user's list selection.  If however I place the list box code onto a Tab page from a jQuery Tab Control, developed in Dreamweaver, the posting doesn't seem to work.
    I must be missing something because identical code is working fine when the list box code is placed on a form yet when the code is repeated from within a Tab, it isn't working.
    The code is simple, and shown below).  The list values are coming from a MySQL table.
    $MyQuantity_query="SELECT * FROM Quantity_Table";
    $MyQuantity_Result=mysqli_query($cxn,$MyQuantity_query) or Die ("Cannot connect");
    echo"<select name='ThisQuantity[$RowCounter]' value='ThisQuantity[$Rowcounter]' onChange='this.form.submit()'><option value='-1' selected>Qty</option>";
    While($MyQuantity_Row=mysqli_fetch_assoc($MyQuantity_Result))
       extract($MyQuantity_Row);
       echo"<option value='$Qty_Number'>$Qty_Number</option>";
    echo"</select>";
    Any suggestions would be appreciated.  Thanks.
    Joel
    [email protected]

    Thanks you.
    I tried placing the selection list inside of
    tags but posting still doesn’t seem to be working? 
    Regards,
    Joel

  • Word-wrap in tab control

    Is there a possibility to make a word wrap in the naming of a page in the tab control?
    Thanks
    Sven

    Sure, possibilities always here... Impossible is nothing:
    Andrey.
    Message Edited by Andrey Dmitriev on 02-10-2009 11:29 AM
    Attachments:
    Tab Screenshot.png ‏6 KB
    Tab Control.vi ‏7 KB

  • How to progammati​cally show a specific page of a tab control

    Hei,
    i have a tab control, from which i want to display a specific page if a specific event occured.
    must be simple, but i just cant find the control property for it.
    ... And here's where I keep assorted lengths of wires...

    of course!!
    thanks for showing me the obvious... i have been trying to get to more specific classes...
    thanks a bunch
    ... And here's where I keep assorted lengths of wires...

  • Tab control background color matching

    I have a system style tab control.  I realized the when the program runs in exe mode, the background color of my label on the tab control doesn't match the backgound color of the tab control.  The background color of the tab control is different between exe mode and development mode.  Anyone help? How do I match the color?  Thanks!
    Kudos and Accepted as Solution are welcome!

    Problem is solved on another post.  Thanks!
    Kudos and Accepted as Solution are welcome!

  • Cursor Legend Tab Control BUG

    Attached is a VI illustrating a bug with the Cursor Legend when graphs are in tab controls. If you enter in a number in the "Cursor X position to move to", then switch pages on the tab control, you'll notice the cursor has moved to the appropriate place, BUT the cursor legend has not changed to reflect that. Once you manually move it, it updates.
    In short, if the cursor position changes programmatically, the cursor legend will update ONLY IF THE XY GRAPH IS VISIBLE, even though the cursor position DOES change.  
    I hope someone from NI will see this post and add it to the bug list (if not already there??). If anyone knows a work around, that would be appreciated also.
    Michael
    Using LV 8.2
    Attachments:
    CursorLegendTabControlBUG.vi ‏27 KB

    Good idea. It doesn't work exactlly, but gave me the idea for how to work around. It appears even if you have a tab value change event doing the same thing the Cursor X Position numeric indicator value change event, the cursor legend X value will not change. You can even try entering the same value in the indicator and pressing return after switching tabs, the cursor legend will not update. It thinks for some reason it is on the correct index. I made a Tab Value change event that first moves the cursor to the next index, then moves the cursor back to the correct index. Ugly but works. Hopefully in the next ver of LV they will have fixed a lot of these cursor bugs; there is definitely some work to be done (i.e. fixing cursor X position for XY graphs, an extremelly annoying bug)
    Michael
    Message Edited by miguelc on 02-23-2007 03:49 PM
    Message Edited by miguelc on 02-23-2007 03:50 PM
    Attachments:
    CursorLegendTabControlBUG_wrkaround.vi ‏34 KB

  • Possible bug with Tab Control and Context Help?

    I created Description and Tip text for each Tab of a tab control I am using on my front panel.  I have a subVI that is called by selecting a menu item from my main front panel.  The subVI's front panel also has a menu system and a Tab Control.  I have Description and Tip text written for each of the tabs on the subVI's front panel.
    When I enable context help from the menu of my main VI, the proper help text shows up for the tabs on the main vi and, when I bring up the subVI's front panel, for its tabs as well.
    So far so good...
    Now I builld the application and run it as an executable.  For ALL of my panel tab descriptions, I get the tab's label in bold text, but no description (just a blank area).
    Is this a bug in LabVIEW?
    Kevin 

    wired wrote:
    I'm still seeing this behavior in LV8.2.1.  Does anyone know if/when it was fixed?  Also, my tip strips show up in the corner of the monitor when I mouse over a tab (in both the executable and the development version).
    I see it still even in 8.5.  
    The Help part of the bug is still NOT fixeed by NI.
    But I dont get the tool tip appearing in the corner of the monitor, it is showing up as usual.
    - Partha
    LabVIEW - Wires that catch bugs!

  • Text Tool on Tab Control Bug?

    I'm trying to create some free labels on a tab control with the text tool and I've found the postion of the text insertion point is off.  When I click anywhere on the tab the text appears a few inches above the point that I clicked on.  The tool is working fine off the tabs and when I go to select the previously written text with it that works too.  I've noticed the insertion point jumps around and is often in a new place when I open a new VI and drop a tab control down.  I have free text on tabs I created last week so I know it wasn't doing it then. Has anyone else seen this behaviour? 
    Using LabVIEW: 7.1.1, 8.5.1 & 2013
    Solved!
    Go to Solution.

    Hi NIquist,
    Your problem has been discussed in another thread and considered as Bug in LabVIEW 8.6 and reported as CAR. Have a nice day!
    Sincerely,
    Krisna Wisnu
    Sincerely,
    Krisna Wisnu

Maybe you are looking for

  • My Itunes Library has become (Damaged)

    My Itunes Library has become (Damaged), there is no previous itunes Library folder to chose a backup from. None of my media is showing in itunes but it is still in the relevant folders within the itunes folder, how do I get it back into iTunes! iMac,

  • Can I determine the IP of someone who has hacked into my wireless DSL?

    I had all my PCs shut down/unplugged recently to move them but noticed the wireless light on my Actiontec was still lit/flashing.  Could this be due to someone hacking into my DSL?  I removed the antenna and it stopped.  Replaced the antenna and it s

  • Define Reporting Time Types

    Hi guys, My quetion is: When creating i.e. an absence type in IMG: Time Management - Time Data Recording and Administration – Absences – Absence Catalogue, when an Absence code is being created the system should do the following: 1. Check if ABxxxx (

  • How to Extract data fromR/3 to BW

    HI,   I am very new to R/3 extraction. i want to know the LO cockpit extraction scenario in R/3 to BW. pls send me the document & useful T-codes with Description. My mail-id: [email protected] Advanced Thanks DORA

  • MB1A message - Profit center was set to 14000

    Hi, When i am doing MB1A with movement 201, enter cost center - 90100 and Profit Center - 13750 and hit enter. Then system shows an information - Profit center was set to 14000. After that system automatically change the profit center. Why system sho