Tab does not show when dragged into it's own new window

This happened after I updated to Firefox 8.0.1. Same problem with 9.0.1. I'm on a Mac running OS X 10.5.8. I have not changed any add-ons, plugins, extensions, or anything like that.
Every time a tab is dragged from my main window to form it's own new window, the tab button on the new window does not appear. I only have a + sign showing.
A tab will show when I open a new tab, but the original "tab" does not appear. The + sign also appears on the left side of all new tabs. Isn't it supposed to be on the right?
If I have 2 "tabs" open but only have 1 tab showing and try to close the window, Firefox asks me if I'm sure I want to close the 2 tabs.
Tabs when opening blank new windows work properly. Dragging a tab to an already opened window works fine as well.
Most of the time a tab is dragged out on accident, and it is quite annoying because I can't drag it back into the main window.
Any help or suggestions would be greatly appreciated.
Many Thanks!

I found the cause but no solution, it's actually a plugin that does that: divx plus weblpayer (it gets installed when you install DivX on your system), if you disable it and restart firefox it all works again. But I want that plugin... so DivX need to fix this, unless it is a Firefox bug in its own core... anyway these two together creates the problem.
(I'm running Firefox 9.x on OSX Lion)
I also wish firefox tab tear out tab worked more like chrome's tab tear out, much friendlier...

Similar Messages

Arrangement tab does not show when trying to connect macbook air to tv

im trying to connect my macbook air to my tv. the arrangement tab in the display tab in system preferences does not show. help please!

Hey jgomez93!
Here is an article that will help you troubleshoot issues with using external displays:
Apple computers: Troubleshooting issues with video on internal or external displays
http://support.apple.com/kb/ht1573
Thanks for coming to the Apple Support Communities!
Cheers,
Braden

Custom Ribbon tab does not show in generic list

Hi.
I'm deploying the following definiton on a generic list, but the new custom tab does not show up. Anyone that can see what I have done wrong?
Thanks!
<Elements xmlns=”http://schemas.microsoft.com/sharepoint/“>
<CustomAction
Id=”Ribbon.MyTab”
Title=”Adds a new Ribbon tab to Generic List”
RegistrationType=”List”
RegistrationId=”100″
Location=”CommandUI.Ribbon.ListView”
>
<CommandUIExtension>
<CommandUIDefinitions>
<CommandUIDefinition
Location=”Ribbon.Tabs._children”>
<Tab Id=”Ribbon.MyTab” Sequence=”110″ Description=”" Title=”My Tab Name”>
<Scaling Id=”Ribbon.MyTab.Scaling”>
<MaxSize
Id=”Ribbon.MyTab.Scaling.MyGroup.MaxSize”
Sequence=”15″
GroupId=”Ribbon.MyTab.MyGroup”
Size=”LargeMedium”/>
</Scaling>
<Groups Id=”Ribbon.MyTab.Groups”>
<Group
Id=”Ribbon.MyTab.MyGroup”
Sequence=”15″
Description=”"
Title=”My Group Name”
Template=”Ribbon.Templates.MyTab.MyGroup.CustomTemplate”>
<Controls Id=”Ribbon.MyTab.MyGroup.Controls”>
<Button
Id=”Ribbon.MyTab.MyGroup.Button”
Alt=”Ribbon.MyTab.MyGroup.Button”
Command=”Ribbon.MyTab.MyGroup.Button_CMD”
Image16by16=”/_layouts/images/siteIcon.png”
Image32by32=”/_layouts/images/siteIcon.png”
LabelText=”Button”
Sequence=”10″
TemplateAlias=”o1″
ToolTipTitle=”Button”
ToolTipDescription=”Shows a dialog” />
</Controls>
</Group>
</Groups>
</Tab>
</CommandUIDefinition>
<CommandUIDefinition
Location=”Ribbon.Templates._children”>
<GroupTemplate Id=”Ribbon.Templates.MyTab.MyGroup.CustomTemplate”>
<Layout Title=”LargeMedium”>
<OverflowSection Type=”OneRow” TemplateAlias=”o1″ DisplayMode=”Large”/>
<OverflowSection Type=”ThreeRow” TemplateAlias=”o2″ DisplayMode=”Medium”/>
</Layout>
</GroupTemplate>
</CommandUIDefinition>
</CommandUIDefinitions>
<CommandUIHandlers>
<CommandUIHandler
Command=”Ribbon.MyTab.MyGroup.Button_CMD”
CommandAction=”javascript: alert('Hello World');” />
</CommandUIHandlers>
</CommandUIExtension>
</CustomAction>
</Elements>

Hello,
I was able to use your custom ribbon tab XML just fine. The only thing is, the copy you provided had a bunch of illegal characters embedded in it (like reverse quotes?), I'm not sure if they're showing up in your version of the XML or not. Anyway,
after replacing those with straight quotes and fixing some other misc formatting, it worked fine. I created an empty SharePoint project and added an empty element, then added your XML to the Element.xml file. In SP, I created a new custom
list and the "My Tab Name" tab appeared with a button that displayed "Hello World" when I clicked it. So, I recommend checking the formatting of your XML. Just look for red squiggles in the editor and fix them.
Regards,
- Kemp Brown [MSFT]

Info tab does not show in iTunes 11.1.2 in iPad sync window

I have OS 10.9 on my iMac, iOS 7.0.3 on my iPad, and I'm using iTunes 11.1.2 . I had only one problem syncing my iPad with the iTunes--the info tab does not show in the sync window. Has the method of syncing calendars changed? How can I do this

I found the following in another discussion thread:
If you use OS X Mavericks v.10.9 or later, your contacts, calendars, and other info are updated on your computers and iOS devices via iCloud. For more information, see iCloud Help at icloud.com. (http://support.apple.com/kb/PH12117)
Since I do not use cloud computing for security reasons, I will not be syncing my contacts or calendars between devices. I hope the Apple developers rethink this strategy. Meanwhile I'll figure out a work-around as I have in the past when software has an unfortunate glitch.

My external hard drive does not show when I am trying to open a document in Office Org??

My external hard drive does not show when I am trying to open a document in Office Org?? When looking in the about IMAC system support it shows as being connected. Any ideas??

Does the drive show up under 'Devices' in Finder?

HT5019 I connect my macbook pro to an Epson wireless projector. The macbook can see the projector wirelessly and the image on the macbook is displayed on the projector. However on system ref., the arrangement tab does not show and thus cannot have multipl

I connect my macbook pro to an Epson wireless projector. The macbook can see the projector wirelessly and the image on the macbook is displayed on the projector. However on system ref., the arrangement tab does not show and thus cannot have multiple view.
I am trying to project Pro Presenter on the Epson projector such that I have the detail screen on the macbook and only the screen I want people to see on the projector display. This has not been possible because the arrangement tab on the Display section of the System Preference is not showing. If i tried to search for the arangement, it comes back with the message that there is not other source detected, hence the arrangement tab is not showing.
I have also tried to connect the Epson directly to the Macbook but it still the same result, so its not because it is a wireless connection. Can someone advise me jhow to go around this problem. I have used windows before and it is very easy to extend ptojection on windows, but this system seems to be frustrating to me.
Thanks,
Toks

Hi Toksyb!
You may want to try clearing out the PRAM on your computer. This process is explained through this article:
About NVRAM and PRAM
http://support.apple.com/kb/ht1379
Thanks for using the Apple Support Communities!
Cheers,
Braden

Scroll bar does not slide when dragged using curser in word

I need answers to two questions.
1.   How to maximise a word document to full window size.
2.   Why the side scroll bar of a document does not slide when dragged.
3.   Am very used to the "delete", "page up and page down" keys and cant find them on keyboard.
Thanks.

What you can try if the above doesn't work, is deleting the scroll bar from your Data List, and then dropping it back in from the Library. The act of re-adding the scrollbar may get you the desired behavior.
If that doesn't work, you will probably need to post your project so we can take a look.
-Bear

Need to send my back up email a reset security questions email but the option does not show when I click on password and security

Need to send my back up email a reset security questions email but the option does not show when I click on password and security

You need to ask Apple to reset your security questions; ways of contacting them include clicking here and picking a method for your country, phoning AppleCare and asking for the Account Security team, and filling out and submitting this form.
(97456)

Trying to sync photos from iTunes (via iPhoto) to ipad and iPhone. The Photo tab does not show up and no sync occurs

Trying to sync photos from iphoto to ipad and iphone. Photo tab does not show up in itunes under devices.

I had a similar problem (https://discussions.apple.com/message/24525903#24525903)
The solution in my case was to start iPhoto and let it update the library, even thu itunes was set up to sync with Aperture.

Hello, the "sign" feature does not show when i open a pdf document with reader (MAC)

Hello, the "sign" feature does not show when i open a pdf document with reader (MAC)

Hi mentane,
Thank you for posting on the Adobe forums, what is the version of Adobe Reader you are working with.
Open Adobe Reader>Adobe Reader>about Adobe Reader.
Thanks,
Vikrantt Singh

TS1410 My iPod shuffle ( 1st or 2nd generation) will not recharge and does not show when the doc is connected to my MacBook Pro. I'm running the latest updated version of iTunes.

My iPod shuffle ( 1st or 2nd generation) will not recharge and does not show when the doc is connected to my MacBook Pro. I'm running the latest updated version of iTunes.

Hello Jane Benstock,
Thank you for using Apple Support Communities
It sounds like the next best step to take would be to reset the iPod Shuffle.
Check out this article named Resetting iPod shuffle found here http://support.apple.com/kb/HT1655.
All the best,
Sterling

ESS tab does not show up after deploying ESS

We did every configuration step for ESS and we had no issue before for other projects.
However this time ESS tab does not show up on EP even the roles are assigned.
ALL Jco tested OK.
What could be wrong?
Thanks for your help.

Jose:
Thanks!
I think I miss
BP_ERP5ESS
BP_ERP5MSS
Because I am at ecc6 enhp4, the matrix at Wiki did not specify above BP version.
Could you tell me what version of
BP_ERP5ESS
BP_ERP5MSS
should be applied to the EP7.01?
Follow up:
Jose: I do see the BP at the same Wiki:
BP ERP05 ESS 1.41 SP04
BP ERP05 MSS 1.41 SP04
BP ERP05 COMMON PARTS 1.41 SP04
I am going to apply them on the portal. Do you agree? Thanks again.
Thanks!

My itunes in pc fails to secure link with itunes store it shows the process bar it automatically quits the process it also does not shows any on the screen. i am using windows xp service pack 3. what shoul i do?

my itunes in pc fails to secure link with itunes store it shows the process bar it automatically quits the process it also does not shows any on the screen. i am using windows xp service pack 3. what shoul i do?
Diagnostics test
Microsoft Windows XP Professional Service Pack 3 (Build 2600)
ECS G31T-M7
iTunes 10.5.2.11
QuickTime 7.6.9
FairPlay 1.13.37
Apple Application Support 2.1.6
iPod Updater Library 10.0d2
CD Driver 2.2.0.1
CD Driver DLL 2.1.1.1
Apple Mobile Device 4.0.0.97
Apple Mobile Device Driver 1.57.0.0
Bonjour 3.0.0.10 (333.10)
Gracenote SDK 1.9.5.502
Gracenote MusicID 1.9.5.115
Gracenote Submit 1.9.5.143
Gracenote DSP 1.9.5.45
iTunes Serial Number 0012ABAC07F3CCB0
Current user is an administrator.
The current local date and time is 2011-12-31 14:06:21.
iTunes is not running in safe mode.
WebKit accelerated compositing is enabled.
HDCP is not supported.
Core Media is not supported. (16005)
Video Display Information
Intel(R) G33/G31 Express Chipset Family
**** External Plug-ins Information ****
No external plug-ins installed.
**** Network Connectivity Tests ****
Network Adapter Information
Adapter Name:        {7599FAD1-1BB9-4AC6-80AF-404253DC519E}
Description:            Atheros L2 Fast Ethernet 10/100 Base-T Controller - Packet Scheduler Miniport
IP Address:             192.168.1.5
Subnet Mask:          255.255.255.0
Default Gateway:    192.168.1.1
DHCP Enabled:      Yes
DHCP Server:         192.168.1.1
Lease Obtained:     Sat Dec 31 13:46:09 2011
Lease Expires:       Tue Jan 03 13:46:09 2012
DNS Servers:         192.168.1.1
Active Connection: LAN Connection
Connected:             Yes
Online:                    Yes
Using Modem:        No
Using LAN:             Yes
Using Proxy:           No
SSL 3.0 Support:     Enabled
TLS 1.0 Support:     Enabled
Firewall Information
Windows Firewall is on.
iTunes is enabled in Windows Firewall.
Connection attempt to Apple web site was successful.
Connection attempt to browsing iTunes Store was successful.
Connection attempt to purchasing from iTunes Store was successful.
Connection attempt to iPhone activation server was unsuccessful.
The network connection timed out.
Connection attempt to firmware update server was unsuccessful.
The network connection timed out.
Connection attempt to Gracenote server was successful.
Last successful iTunes Store access was 2011-12-31 14:00:02.
**** Device Connectivity Tests ****
iPodService 10.5.2.11 is currently running.
iTunesHelper 10.5.2.11 is currently running.
Apple Mobile Device service 3.3.0.0 is currently running.
Universal Serial Bus Controllers:
Intel(R) 82801G (ICH7 Family) USB Universal Host Controller - 27C8. Device is working properly.
Intel(R) 82801G (ICH7 Family) USB Universal Host Controller - 27C9. Device is working properly.
Intel(R) 82801G (ICH7 Family) USB Universal Host Controller - 27CA. Device is working properly.
Intel(R) 82801G (ICH7 Family) USB Universal Host Controller - 27CB. Device is working properly.
Intel(R) 82801G (ICH7 Family) USB2 Enhanced Host Controller - 27CC. Device is working properly.
No FireWire (IEEE 1394) Host Controller found.
Connected Device Information:
rawkiss’s iPhone, iPhone 3G running firmware version 4.0
Serial Number:       86931UEAY7H
**** Device Sync Tests ****
Sync tests completed successfully.

I have found a fix after doing additional research through this forum. Tech Note #328730 addresses this problem and it works for Photoshop Album 3.2 even though it was written for release 1.0.
Here is a link that will take you directly to the Tech Note:
http://kb.adobe.com/selfservice/viewContent.do?externalId=328730
When using this fix the Tech Note indicates:
"Imported image data and tags are lost when you re-create the My Catalog.psa file, so you need to reimport images and reapply any tags"
however it did retain the captions (at least it did for me).

The sequence does not show when exporting media from premiere

hi
i have the following setting for my sequence-
editing mode- main concept bluray
time base-25.00
preview file format -mpeg bd 1080 50i vbr 34 mbps
width 1920
height- 1080
maximum render quality
issue is when i export media the adobe media encoder does not show the sequence
and when i export in some other format- it only shows h.264 option and not h.264 bluray. as a consequence cannot write any bluray since all the option are progressive
do i need to reinstall something/anything
issue with mainconcept?
is there a tab where one can add presets in media encoder?
thanks

If you installed AME through the Creative Cloud, then this is a known issue which was fixed in an update released just a couple of days ago. To get this update, select Updates in the Help menu.
If you're not on Creative Cloud, then please specify which product or suite you installed that included AME, and also indicate whether it's activated or running in trial mode.

Pasted image does not show when imported to AI

Mac OS 10.4.11 - Acrobat CS4. I made a contact sheet of images in Bridge which was saved as a PDF. In Acrobat I pasted another image (different size ratio) and saved again. However, when I placed the image in Illustrator the pasted image did not show, only the original contact images. It does not show at preview level either, but when the PDF is opened it is definitely there. I tried to 'flatten' it but cannot find a option that works.See attached file.

I would love to help you, but I'm totally lost as to what you are trying to do.
Here are my questions:
Mac OS 10.4.11 - Acrobat CS4.
There really isn't an Acrobat CS4. There is Acrobat 9 that shipped with CS4. But let's go one.
I made a contact sheet of images in Bridge which was saved as a PDF.
OK, that's good, I understand what you're doing.
In Acrobat I pasted another image (different size ratio) and saved again.
OK, this is where you lost me. Acrobat does not have a paste image ability. Exactly how did you get that image onto the Acrobat page? You copied from where? You pasted how? This is totally screwey.
However, when I placed the image in Illustrator the pasted image did not show, only the original contact images.
Placed what image? The original PDF contact sheet? Why are you trying to put it into Illustrator? There's no reason I can think of to do such a thing.
PDF is usually the final output form. It isn't a page layout tool to place into other programs.
It does not show at preview level either, but when the PDF is opened it is definitely there.
Still trying to figure out what you talking about.
I tried to 'flatten' it but cannot find a option that works.See attached file.
You have totally lost me. There is no "flatten" in PDF? That's in Photoshop? What are you doing???

Tab does not show when dragged into it's own new window

Similar Messages

Maybe you are looking for