Tab going to a new line when end of line is reached

In most text editors, when you hold the tab key down, the cursor goes from tab stop to tab stop across the line. When end of the line is reached, the cursor goes to the next line, again goes from tab stop to tab stop on the new line, and so on. You end up with multiple lines.
In TLF, with tabStops set, holding the tab key down, the cursor goes from tab stop to tab stop across the line. But when the cursor reaches the end of the line, it doesn't go to the next line. The cursor stays at the end of the line while more tab characters are inserted into the text flow. There is always only one line.
Is there a way for TLF to have the tab key go to the next line when the cursor reaches the end of the line?
Thanks for the info.
Will

Thank you very much for the update.
We also discovered that, any line which has the previous line ending in a tab, any leading tabs will not show. For example (all in the same <p>):
Line one ...<tab/>
<tab/>Line two
The leading tab on line two will not display. If the previous line does not end with <tab/>, then the leading tab on the following line shows. Is this related?
Also, will the fix come in a 2.x update? Any time frame?
Thanks again for the info.
Will

Similar Messages

  • Open link with middle click to a new tab goes back to original page when selected

    Scenario:
    I am on a page (eg. a google search) and middle click a link to open it in a new TAB. The page opens in an adjacent TAB. I may or may not open other links in the same way.
    Problem:
    As soon as I select anyone of these new TABS it automatically jumps back one page history, eg. back to the google search page in this example.
    Comments:
    This was happening on my last PC and I have just got a new one. The problem was not there and now it seems to be back. Could it be a setting that is getting sync'd across from my online profile?

    Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Firefox/Tools > Add-ons > Appearance).
    *Do NOT click the Reset button on the Safe Mode start window or otherwise make changes.
    *https://support.mozilla.org/kb/Safe+Mode
    *https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

  • When tabs are on top options is on; if I click a link (which is set to open in new window by web site or addon) the new opened page's tabs goes beyond the screen limit. when i restore down and restore up the page it gets its normal form.

    http://i55.tinypic.com/25jbejm.png ( this is the problem )
    http://i55.tinypic.com/303k3kx.png ( this is how it should be)

    I don't even know if that's possible, and I have so far not seen any unusual activity on the computer.
    No, it's not even remotely possible. What you encountered was an attempt to scam you, and a pathetic one at that.
    Identity theft in general is a significant threat to any computer (a term encompassing Macs, PCs, iPads, iPhones...) user. However, that threat most commonly arises in the form of "phishing" and you didn't play along with it. The likely reason the email appeared to have come from one of your previous eBay vendors is that his email address was harvested using any number of methods. The email probably didn't even originate with him. eBay is a rich source for obtaining such information.
    eBay has a fairly helpful guide on the subject: http://pages.ebay.com/help/account/recognizing-spoof.html
    To answer your specific questions:
    Is there any malware or other harmful/malicious computer code--read, something that could steal my identity if/when I do my taxes online this year--currently known to be a threat to home non-business Mac computers?
    No.
    So, in summary: Should I be worried that I fell for some new (since 2013) method of unknowingly downloading malicious software to my Mac?
    No — although Mac-targeted adware has arisen since that time and is a rapidly growing annoyance that can make using your Mac practically impossible, it will not directly cause information theft as you have described it concerns you. Furthermore, it requires your participation to install it in the form of an Admin name and password — and it requires deception to convince you to supply those credentials. Learn more about how that happens here: How to install adware.

  • How do I get Firefox to open in a new tab (instead of a new window) when I click on one of my buttons in my toolbar?

    When I click on one of my buttons in the toolbar, Firefox opens that button in a new window. I would like to be able to click on one of my buttons and Firefox open it in a new tab instead.
    == This happened ==
    Every time Firefox opened
    == When I attempt to click on a button

    Right click the FireFox button in your toolbar and look in the properties- middle tab...make sure that it only has "C:\Program Files\Mozilla Firefox\firefox.exe" with no other link added to the end. I had a similar problem this morning and found a website had attached it's link to the end so it would always pop up first and would only open a new tab.
    Hope that fixed it.

  • How do I get Firefox to open a new tab instead of a new window when I open email or other links?

    Firefox used to open a new tab when I opened links or MSN email....now it opens a new window...EVERY TIME. Its quite annoying
    == This happened ==
    Every time Firefox opened
    == a few weeks ago

    Try this extension: https://addons.mozilla.org/en-us/firefox/addon/new-tab-king/

  • When right-clicking firefox in the task bar... v5 does NOT open a new tab, or open a new window when selected. Only crtl-N opens a new window iff Firefox is the active window.

    Today FF 5.0 was DL-d and installed (automatic update is/was active). Help->About-> shows version 5.0, and there were no problems with the install.
    I have ASUS G72 running W7 with the latest MS updates via auto-update.
    FF is pinned to the task bar.
    Previous version(s) allowed for opening new windows and tabs by right click of FF icon on task bar, and selecting "Mozilla FireFox" (which opened new window) , or selecting "Open New Window." Opening a new tab in the current session could be done by selecting "Open New Tab."
    These features do not operate in the latest version (5.0), or have I fumbled the ball (by not having something set right in this version.
    Thanks in advance for you help. Keep up the great work.
    ;>

    If you have tabs on top and no menu then the tabs are in a "Windows" area so there is no space to right. If you put tabs back to the bottom you will have most of your old behavior but because of the changes to tabs on top most of the tab context menu stuff all of the context menu part was lost except the customize toolbar stuff, double-clicking on an empty spot was restored, and eventually during the FF 4 beta most of the tab extensions Firefox messed up eventually worked again except in the area to the right of the tabs.
    The Windows part of that double-click has to maximize or restore to normal,
    and you have to be able to drag the window by it;'s title bar.
    You can make Firefox 4.0.1 and '''Firefox 5.0''' look like Firefox 3.6.17, see numbered items 1-10 in the following topic [http://dmcritchie.mvps.org/firefox/firefox-problems.htm#fx4interface Fix Firefox 4.0 toolbar user interface, problems (Make Firefox 4.0 look like 3.6)]

  • Capture Not Ending When End of Timecode Is Reached

    I'm doing a Capture Now and after the capture reaches the end of the timecoded tape, the last image appears to be frozen, but experience shows that the camera is continuing to roll the tape to the very end -- even though there's nothing there to capture.
    Shouldn't FCE know to cut off the capture process at the end of the timecode? Any suggestions for getting my Capture Now process streamlined?
    Here's the message I get: +"Capture Now has reached the end of the tape. All existing footage between the point where you started the capture and the end of the tape was captured successfully."+
    Thanks.

    Capture NOW is controlled by FCE>System Preferences>Scratch Discs>Limit Capture Now To:
    It's Default is 30 mins, you can change the capture now to anything you like by typing in the field.
    This tells FCE to free up the appropriate amount of hard drive space for a capture.
    If it's set to 30 mins that's what it does (even if the TC runs out) unless you hit the Escape key to stop capture manually.
    Al

  • Issue when "AT NEW " or "AT END OF " is executed

    Hi,
    I face an issue, when "AT NEW <>" or "AT END OF <>" line gets executed: the loop structure which fetches record from internal table, gets reset every time when either of above two statements are executed. But, whenever loop is called and the structure gets assigned with value, it seems to be fine. Only when above two statements are executed, the problem is introduced. I checked it in debug mode. Not sure on how to solve it. please help.
    Thanks,
    Gaurav.

    Hi,
    When the AT NEW or AT END command get executed in that time the structure which toy are using will make all the fields * other except the field on which you do the AT NEW or AT END.
    Hence you need to pass that structure values to the another structure before the AT NEW and AT END and use that structure in the AT NEW and AT END so ypu will get all the values inside these functions.
    loop at t_temp to lw_temp.
    lw_temp1 = lw_temp.
    AT NEW field name
    Lw_temp =lw_temp1.
    ENDAT.
    ENDLOOP

  • How to delete the ends of line ["\n"] in a String before parsing

    hi, i'd want to parse a String with Regex/Pattern.
    This String contains ends of line i want to delete before applying my parsing treatment.
    I've tried to do that by replacing the character "\n" with "" :
        // the original text
        String orgTextToParse = new String(buffer);
        //we create a pattern to recognize the ends of line
        String regExpEol = "\n";
        Pattern patternEol = Pattern.compile(regExpEol);
        Matcher matcherEol = patternEol.matcher(orgTextToParse);
        // the new text without end of line
        StringBuffer newTextToParse = new StringBuffer();
        // we replace the "\n" by ""
        while(matcherEol.find()) {
          String REPLACE = "";
          matcherEol.appendReplacement(newTextToParse,REPLACE);
        matcherEol.appendTail(newTextToParse);
        System.out.println("[new string start] " + (newTextToParse.toString()) + " [end of new string]");Is there an appropriate way to delete "\n" ?
    (perhaps a method of the Pattern or Matcher classes... ?)
    thanx
    Edited by: jfact on Dec 29, 2007 11:05 AM
    Edited by: jfact on Dec 29, 2007 11:06 AM

    The second (optional) argument to Pattern is a set of flags. Take a look at the Javadoc.
    The 'genomic' implication is that the EOL is an arbitrary line break for human consumption so it does look like you need to remove the EOL. I would just use replaceAll() since it can be done with one line of code (or just a couple if you pre-compile the regex) without the need for any looping.
    line = line.replaceAll("\n","");Edited by: sabre150 on Dec 29, 2007 10:27 AM

  • Add New Screen Fields in Delievery Line Item

    Hello All,
    We have a requiremnet where we should add 3 custom fields to delivery line item tabs,
    please let me know how I can add a new tab for delievry line item tabs and how to add new custom screen fields in that tab,.
    Thanks
    Add New Screen Fields in Delievery Line Item
    Edited by: kishore_99 on Dec 8, 2009 5:31 PM

    No, I won't explain it in detail - you need to read the documentation and at least make an attempt at the process on your own first.  The documentation is right there in the IMG where I said it was but here's the path since you can't find it:
    Logistics Execution -> Shipping -> System Modifications -> Business Add-Ins in Shipping -> BADI for Additional Item Detail Screen...

  • Move Order lines and Delivery Detail lines - Relationship

    Hi All,
    Is there a one - to - one realtionship between Move Order Line and Delivery Detail Line?
    i.e., Each Move Order line will correspond to only one Delivery Details line Record?
    Thanks in advance.
    Regards,
    Gowri

    Hello,
    There is a one - to - many relationship between Move Order Line and Delivery Detail Line when you split lines in delivery.
    select * from mtl_material_transactions t you have source_id.
    select * from WSH_DELIVERABLES_v t you have move_order_id.
    Regards,
    Luko

  • Problem creating a new row when using tabbed regions

    I am new to JHeadstart and ADF and have been using the evaluation version of JHeadstart (in JDev 11.1.1.3) to judge its efficacy for a new significantly-sized application. As part of that evaluation I have created a small application (you can do this with HR schema using say the Departments table) with a single entity and VO. On JHeadstart I have then placed some of the fields into multiple Item regions within a Tabbed region on the same page and below the Group (layout style Table, Table Overflow Style below With Splitter). Existing rows display fine and I can view the data on the separate tabs.
    However, if I try to create a row, I can fill in the data on the main region, but if I fill in data on the first tabbed region I cannot switch to the next tab without an error being generated.
    e.g. using Departments - fill in DepartmentId and DepartmentName on main region, fill in ManagerId on first tabbed region and try to switch to second tabbed region to fill in LocationId:
    Missing mandatory attributes for a row with key null of type HRModule.DepartmentsView1
    Attribute DepartmentId in HRModule.DepartmentsView1 is required.
    Attribute DepartmentName in HRModule.DepartmentsView1 is required.
    If you save, then you can navigate.
    You can also demonstrate something similar (different error message but probably the same root cause) on the myJHSTutorial demo. If you navigate to an employee off the regions page and try and create a new employee (using the '+' button below the 'Employees' label), then the tabs are not refreshed and any attempt to change the tabs results in an error
    Failed to validate a row with key oracle.jbo.Key[999 ] in HRModule.EmployeesView3
    Attribute Salary in HRModule.EmployeesView3 is required.
    Salary must be between 6000 and 12000 for this job.
    The JHS devguide does not help. Any thoughts? I can send the HR sample if you wish.

    OK, I was able to reproduce this. The problem is that when you switch tabs, a partial page request is send to the server which does not include the items filled in the table row itself, hence these items are not updated in the underlying view object row.
    Solution is to have a partial trigger at the table or group level listening to tab events. We will add that to the next release, but you can also apply the fix yourself by adding the following lines to the stackedRegionContainer.vm template:
    #if (${JHS.current.pageComponent.tableLayout} && !(${JHS.current.pageComponent.hasOverflowInline}))
    ## when creating a new row in a table, and using overflow right/below, when switching overflow tabs
    ## the items filled in the table itself must also be processed as part of JSF model update phase, to
    ## prevent required item error when clicking another tab in overflow area
    ## we can enforce this by making the whole group listen to tab events
    #ADD_CUR_GROUP_PARTIAL_TRIGGER("#REGION_ID()Tabs")
    #end
    Add these lines just before the line starting with
    <af:${elemName}
    Steven Davelaar,
    JHeadstart team.

  • Can't open new tab by going to file/new tab (or CTRL+T or clicking on the new tab field). Only way is to right click on a link and choose open in new tab.

    Can't open new tab by going to file/new tab (or CTRL+T or clicking on the new tab field). Only way is to right click on a link and choose open in new tab.

    Hello,
    '''Try Firefox Safe Mode''' to see if the problem goes away. Safe Mode is a troubleshooting mode, which disables most add-ons.
    ''(If you're not using it, switch to the Default theme.)''
    * You can open Firefox 4.0+ in Safe Mode by holding the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
    * Or open the Help menu and click on the '''Restart with Add-ons Disabled...''' menu item while Firefox is running.
    ''Once you get the pop-up, just select "'Start in Safe Mode"''
    '''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one. Please follow the [[Troubleshooting extensions and themes]] article for that.
    ''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before opening Firefox for normal use again.''
    ''When you figure out what's causing your issues, please let us know. It might help other users who have the same problem.''
    Thank you.

  • Why does Firefox sometimes open a new window when I navigate to an existing tab?

    I often have 7 or 8 tabs open in Firefox. Sometimes when I click on a tab, Firefox opens it in a new window instead of just going to that tab. I haven't figured out a pattern when it does this.

    A very slight movement (usually downward) will cause the tab to "tear off"/"tear away" into a new window. You can drag the tab back to the original window from the new window.
    You can install this Add-on to stop the "tear off"/"tear away" behavior:
    *https://addons.mozilla.org/en-US/firefox/addon/bug489729-disable-detach-and-t/
    '''If this reply solves your problem, please click "Solved It" next to this reply when <u>signed-in</u> to the forum.'''
    Not related to your question, but...
    You need to update some plug-ins:
    *Plug-in check: https://www-trunk.stage.mozilla.com/en-US/plugincheck/
    *Adobe Shockwave for Director Netscape plug-in: [https://support.mozilla.com/en-US/kb/Using%20the%20Shockwave%20plugin%20with%20Firefox#w_installing-shockwave Installing ('''''or Updating''''') the Shockwave plugin with Firefox]
    *Next Generation Java Plug-in for Mozilla browsers: [https://support.mozilla.com/en-US/kb/Using%20the%20Java%20plugin%20with%20Firefox#w_installing-or-updating-java Installing or Updating Java in Firefox]

  • Tabs disappear and open a new window when editing files in Wordpress

    When editing files in Wordpress built-in code editor, if I highlight and try to copy/paste to another file or even within the same file the tab I am on will often abruptly close and then reopen itself in a whole new window. This is extremely disruptive. I have to close the window that popped open and go back to my browser instance with the open tabs and create a new tab for that page then restore my tabs in their previous order. The have to do it all over again a few minutes later.
    Never had any type of trouble like this with previous versions of Firefox, and nothing else has changed on this PC.

    Hi Nicolas,
    I don't know about a pop-up, but if you are trying to open a page (page 2) in a new window (internet explorer window), then do the following:
    Instead of using a navigate pushbutton, use a hyperlink component.
    In the URL selection option insert the URL (web address) of page 2. You can find the URL by going to SE80, in the repository browser select "BSP Application" and "THE TECHNICAL NAME OF YOUR BPS". Open your BSP and go to the folder "pages with flow logic" and find your "page 2". Double click on your page and then select the "properties" tab and navigate to the bottom where you will see the pages URL.
    Insert this URL address into your hyperlink component back in the Web Interface Builder.
    Leave the Target selection as parent. Make sure your internet explorer enhanced options are set to "not reuse the same window" under the browser options.
    Good luck.
    Rael

Maybe you are looking for