Tab groups - set default size of single tab group in a window?

When I have a single tab group in a window, and enter the tab-group-view-mode (the one for which ctrl-shift-e is the default), the tab group box only fills up a limited portion of the upper left corner of the window.
I can of course resize it with the mouse, but how can I set it to fill up the whole space by default?

I know its all open, in the past you could add a style sheet to the file grabbing the styles Reference[http://forums.mozillazine.org/viewtopic.php?f=38&t=2443805] but I am not sure if this is supported anymore?
[https://developer.mozilla.org/en-US/docs/Mozilla/Developer_guide/Customizing_Firefox] may be helpful too, but I do not think that the document is complete.
If you open the size of the Group tab is should stay that size, I do not think there is a way to change the default size yet.

Similar Messages

How to set default size for .chm window?

I know there is an answer at grainge.org, but it seems to be
referring only to a .chm using skins, which I am not.
Anybody know how to make the default size of the .chm larger?
thanks, Leisa

Lacona,
The default window size is set in your windows properties
dialog in RoboHelp. It can also be set manually in the .hhp file
before you compile. If you open the .hhp file in a text editor,
such as Notepad, you will see a [WINDOWS] section and for each
window defined there will be a series of numbers. One of these is a
vector [in square brackets] that defines the original position.
These are absolute screen pixels.
In older versions of RoboHelp, one of which I use, there was
a limit to the size of the window RH would allow but when I changed
the .hhp, RoboHelp didn't try to overwrite it unless I reopened the
Windows properties dialog. I'm not sure how the latest versions
handle this but you might try editing the .hhp with Notepad and
then compiling the .chm.
John

How to set default size for published SWF in Catalyst CS5.5

I create a 800*600 pixel project in Catalyst CS5.5 and published it as .swf.
But when I opened the published .swf, the default size is smaller than 800*600. I have to resize it by myself.
So is there any method that I can set the default size for published .swf?
Thank you guys! Best regards.
Nick

When you start new Flash Catalyst project, you have the option to enable resizing
This setting is enabled by default.
If you need to change this later, you can go into Modify > Artboard settings.
Now when you publish your project, the width and height will be used instead.
As to manually editting the HTML file, there are 3 tag sets that define the width and height of the project (to handle various browsers). You will need to adjust the values in each of those tag sets. You should only need to do this if you can't republish the file.
Chris

Hi! Question about setting default size when opening existing PDF's.

The pdf documents i download all seem to open up at 202% size. Is there a way to set my default size (for opening and reading documents) to something smaller, so I don't have to always use the magnifying tool to shrink them? Thanks!

Under Preferences | Page Display, set Zoom to 100% or whatever you would like to open it with.

Setting default size for the information area in the main window

Hi, I wonder if there is any way to change the default size of the information area in the main window (lower left corner). I want it a little bigger because I had some useful information set there and I had to change the size every time I log in.
Thanks in advance.

That part of the interface doesn't have an exposed preference to control.
One thing you could do is reorder your metadata fields within the info pane so the most important are listed first and always visible.

Set default result to single page, 999 rows per page

hi!
im using 10g with windows server 2003.
everytime i start isqlplus, the default setting is to display the result of a select query to multiple pages with 24 rows per page. i like to have my result in a single page. i can change it in the preference but every time i logout and login again, it goes back to multiple pages. i searched the config file but couldnt find the setting to have the default as single page.
is it possible to set the default to single page?
thx.

you need to creat a login.sql file in c:\orant\BIN
then add the line
set pages 999
set lines 2000 ( if you want to set the line size too)
set ..... (all set variables can be set here only)
then invoke the sql*plus via plus33w etc.
your changes will be done
if not then
open sql*plus
SQL>
type host
SQL>host
C:\>windows>
if the command prompt comes with c:\windows then you have to copy the login.sql file in this folder.
it depends upon this directory
this is the working directory for the shottcut you used to open the plus33w
You can write theses lines in glogin.sql in the sqlplus folder of your oracle_home directory
ad c:\orant\plus33 or c:\orant\sqlplus
then it wil be done globally.
Just try
if problem exists then come back
Good Luck.

How to set default option to open to full spread in window

Re: InDesign CC
I have an IDCC book where each chapter resides in its own .indd file. When I open the file, the spread is offset. It's mostly just the lower right corner of a page that is displayed. To correct this, I manually go to View and select Fit Spread in Window. That centers the spread so that I can work on it.
The problem I have is that I'm having to repeat this action with each new .indd file that I open.
Is it possible to set the default opening view to fit spread in window?
Thanks

Ideally a document should open in the last view that you closed it as . Try restarting the application and try several diffrent files if you need to.
If you still face some problems try replacing your preference ( Location can be found on : http://helpx.adobe.com/indesign/kb/indesign-preferences-support-file-locations.html )

Terminal.app won't return window to default size with open tab

I regularly have multiple Terminal.app windows open with multiple tabs open in them. If I have a window open with no tabs, I can drag scale the window to whatever size is convenient for me at the moment, then use the Window > Return to Default Size function to make it go back to my default size configured in the app preferences.
The problem comes when I have a window open that is already scaled to a different size and I open a tab. This resets the default size to whatever size the window was when the tab was opened. The result is that if I use the Window > Return to Default Size function, it does nothing, unless the window has been scaled again, then it resets the window size to what it was when the tab was opened, not the default size configured in my preferences.
Is this a feature, or a bug? Is there a way I can make it retain the default size dimensions even when I've opened a tab?

I would solve the problem by resizing after closing the added tab. However, your inquiry is really beyond my abilities. Questions do get answered in these forums; sometimes not, in which case resorting to Apple Support _may_ resolve the issue. Have you checked out posting under "Mac OS X Technologies"? I believe there are Unix sections to that forum. Good luck.

Default size and location, dialog boxes

how can I set default size and location of dialog boxes? I have tried several things to no avail,
thanks in advance

1. You could create your own subclass of Dialog/JDialog with your defaults set automatically
2. You could create a DialogFactory that creates Dialogs (pretty much the same as 1)

Set Default User Agent in Safari

Hi,
Can anyone tell me how to set Default User Agent to Mac in Safari for Windows. As when i start Safari every time now it gives me a default user agent while i want it to be Mac 3.1.
Will appreciate help. Thanks in advance.

Enable the Debug Menu and then use the User Agent switcher feature.
Custom PC Windows XP Pro

How to set the size of an Excel-file,Java created in tabbed forma

Hi all,
I'm creating an Excel-file by writing data to an outputStream in tabbed format.
My problem is : How can I set the width of the columns of that Excel-file, not the default-size?
If anyone can help, that would be very nice.
Thanks a lot,
Regards,
Tim

You can write a generic xls file containing a Macro to open and set the column widths of text or csv files. Your java program can then call this generic file to open your text files.

[svn:fx-trunk] 12909: Pre-FP10.1, set default tab stops in TLF.

Revision: 12909
Revision: 12909
Author:   [email protected]
Date:     2009-12-14 10:33:13 -0800 (Mon, 14 Dec 2009)
Log Message:
Pre-FP10.1, set default tab stops in TLF. Without this, if there is a tab and TLF is measuring width, the tab will measure as the rest of the remaining width up to 10000.
QE notes:
Doc notes:
Bugs: SDK-24589
Reviewer:
Tests run: checkintests
Is noteworthy for integration: yes
Ticket Links:
    http://bugs.adobe.com/jira/browse/SDK-24589
Modified Paths:
    flex/sdk/trunk/frameworks/projects/spark/src/spark/components/RichEditableText.as
    flex/sdk/trunk/frameworks/projects/spark/src/spark/components/RichText.as

SpryAccordion.css
You have an error that is killing the rest of your code shown below in red. Remove it.
.AccordionPanelContent {
    margin: 0px;
    padding: 2px; /**suggest using 12px or more**/
    background-image: url(../infobkgd.png);
    background-attachment: fixed;
    background-repeat: repeat;
    font-family: Verdana, Geneva, sans-serif;
    font-size: 12px; /**suggest using 16px or more**/
    color: #FFF;
    overflow: hidden;
    height: 40
[x;
    height: 100%;
Nancy O.

Setting paper size for multi-tab numbers file?

i have a (currently) 3 tab spreadsheet that someone is working with me on. two of the tabs i print to 12 x 18 and one of the tabs i print to 8 x11.
right now i have to open inspector, set paper size to 8 x 11, go to print view and slider-scale to appropriate size so it will print to single width, open print dialog, select 8 x 11 printer, print the pages from this tab. then i go back to inspector, select 12 x 18, select next tab, go to print view and slider-scale to appropriate size so it will print to single width, open print dialog, select 12 x 18 printer, print the pages. then i select the next tab, go to print view and slider-scale to appropriate size so it will print to single width, and run a print to 12 x 18 paper.
this gets me all three documents if i didn't make a mistake somewhere and forget to select the correct printer or open inspector or whatever.
can someone tell me whether in numbers i can set a PAGE SIZE for a TAB (as i have done above) and have it stick or does the selection of a page size in numbers apply to the whole document? i keep sending this to my bookkeeper and getting it back and this is a whole lot of aggravation that is really messing up my workflow and there seems like i should be able to find a way to streamline this.
note: i am actually /receiving/ xls from my bookkeeper (and exporting to xls when i send it to her) and we also need to keep the tabs together b/c one tab is pulling info from the others but i am wondering if there could be some kind of workaround.
i'd like to ask her to just print the pages to pdf before she sends it to me but this is an added layer of work on her end that is not going to happen. also, i /can/ open in excel (i have excel for the mac) so if this works easier by printing from excel i will do that.
any experience with this issue would be greatly appreciated.
THANKS

hi Y. BIG time thank you for this. i was not aware this was such an issue. i definitely cannot have any ambiguities in my spreadsheet and customizing it in numbers is the whole reason i am spending this time formatting (i.e. to make it intuitive and visual).
that said, if accepting excel and then exporting to excel will cause problems i absolutely cannot have this.
can you help me a little more on what the problems are? i have already got a file with two tabs directly imported from Quickbooks (by my book keeper in excel) and a tab that she set up that pulls data from these tabs - and then i have MY tab that i have been customizing and proofing and fixing as i go along. more info on this work below.
are there commands i can run to clean this up?
what is considered OK to do in numbers if i am accepting excel (printing? adding new numerical entries)?
THANK YOU
background: right now i am /mostly/ doing formatting things like adding bold outlines or adding color or whatever but i have /also/ been dragging and dropping some rows to put them in a better place and fixing some cell sums that were either left out by my book keeper or which needed to be added to check THEIR work. are you saying that by doing this i am setting myself up for various formatting issues such as merged cells?
if so, once i finish the format of the spreadsheet and the tabs i can only exclusively open in numbers if this is necessary. are there some commands i can run to "clean up" issues? for instance can i go around the various tabs and unmerge cells to clean things up?
also, i definitely cannot split up tabs into individual documents as the customized spreadsheets are pulling numbers from a set of tabs that are quickbooks imports....

How to set default value and bg color of cross tab cell?

Hi all
Which way can I set default value and background color for a crosstab cell where there are no any data?
I try to pass it in following way
if isnull(CurrentFieldValue) then
But is has no effect.

Hi,
If your field is numeric
if currentfieldvalue =0 then cryellow else crnocolor
if the field is numeric but you don't see the 0 check check if : Suppress if zero is ticked in the Number format tab.
Regards

In Initial View, can you set defaults for Navigation tab, Page layout, and Magnification?

Adobe Acrobat 9 Pro V9.4.0
Win7 Pro x64
Problem: In Initial View, can you set defaults for Navigation tab, Page layout, and Magnification?
Every time Acrobat scans a document, I have to go to Initial View to set Navigation tab, Page layout, and Magnification. It does not remember the settings I last used.
Thanks in advance.

See my response to this post

Tab groups - set default size of single tab group in a window?

Similar Messages

Maybe you are looking for