TAB IN PM ORDER

Hello,
Is there anyway to rename the TAB (Once you enter to the PM Order) that you can create by means of EXIT:
EXIT_SAPLCOIH_018
EXIT_SAPLCOIH_019
SAPLCOIH                       SAPLXWOC
Kind Regards

David,
I don't think that's possible in older versions. The "Enhancement" is hard coded into the program. You will have to do a modification to the program to get this changed.
If you are in the ECC6.0 then you could define your own tab names using the Order view Configuration.
Regards
Narasimhan

Similar Messages

Final Delivery indicator in Goods Receipt tab in Process Order

Hello Friends,
I have one doubt, thought to discuss with you.Whats the importance of Final delivery indicator in Process order.I know that if any further goods receipt is not accepted against the order than we should tick this indicator,because of which system sets the DLV status at order header level or if goods receipt qty against the order is equal to order qty than system automatically sets this indicator.
when we do the settlement of order than system looks either for TECO or DLV status of order , if its find there than system consider such orders for settlement.
Now my question is suppose i have done the Goods Receipt against the order less than the order qty, than system will set the PDLV Status against that order.Now no further goods receipt is expected against that order.Now i haven't set the Final delivery indicator in goods receipt tab in process order.But i have technically completed the order,because of which system has set the TECO status against that order.
Will system allow me to settle such order?and viceversa, if order has DLV status at header level and no TECO status, than system will allow to settle such order?If yes than whats the other use of Final Delivery indicator in process order?Is it important to set that indicator from settlement point of view only?
As far as i know, system allows us to do,but on this issue i have got different answers from different person.So bit confused.
Thanks and Regards,
Jitendra Chauhan
Edited by: jitendra chauhan on May 8, 2009 8:42 AM

Dear,
Will system allow me to settle such order?and viceversa, if order has DLV status at header level and no TECO status, than system will allow to settle such order?
Yes
If yes than whats the other use of Final Delivery indicator in process order?Is it important to set that indicator from settlement point of view only?
You need to Final confirm (CNF) the Order to get the DLV Status.
Or if the Delivery completed indicator is set in the Process Order, then also th System status will be DLV
If your order quantity10 and you produced 10 quantity it means that order is fully deliver then Final delivery will automatically be set.
The "delivery completed" indicator has the following effects:
o The item is regarded as closed, even if the total quantity was not delivered.
o A further delivery is not expected, may, however, arrive.
If status is DLV then it cannot be a WIP stage where the the good are posted to stock and production is completed
Please refer this thread fro DLV and TECO,
Re: order settlement
Regards,
R.Brahmankar

Clearing the the street,Postal code and city in partner tab at sales order

Hi Experts,
I have a requirement like in sales order header or Item, In partners tab, when they are selecting the particular partner function like CR and the customer number is 500, and if they press enter then automaticaly it fetches the name,street,postal code and city at the right side for that entry. My requirement is like for particular customer 700, they want to hide the customer address in that Partner tab while sales order creation VA01. If they select the partner function CR and customer 700, after pressing enter, it shouldn't fetch the automatic address of that customer. They just want the customer name and remaining fields like street,postal code,city should be blank.
Can you please let me know how to reach this requirement ate sales order creation or change level in partner function tab.
I test these exits EXIT_SAPLV09A_001 to EXIT_SAPLV09A_004 but no use. Let me know possible ways to achieve this?
Any idea on these?
Thanks in advance ,
Edited by: dolly B on Jan 18, 2010 11:36 AM

Hi,
This is happening because you have not maintained your data in sales order.
Billing document takes the reference of order and delivery document for taking the data.
Now if you donu2019t maintain your partner function in order nor in delivery then it wont be determine in billing document.
If you want ZZ to shown in billing document then you have to make that function visible in sales order.
While creating sales order it will take it from customer master data but when you are creating billing it wont search in customer master data it will search in sales order only.
You can do one thing make that function non modifiable in partner determination procedure.
So it cant be change in sales order.
But I want to know why you want that should not be visible in sales order.
Hope so I will be correct with my explanation.
Regards
Raj.

How to enable Billing plan tab in sales order (lean) with NWBC

Dear All,
The Billing plan tab in sales order (lean) is not availabe with NWBC. How to enable this tab?
Is there is any documentation to do the modifications of NWBC's webdynpro screens?
for example, there is a standard webdynpro screen in NWBC from SAP best practices to create sales order (lean). The lean sale order screen having restricted elements and tabs when compare with standard SAP GUI (t code va01).
So I want to include the few missing tabs for data entry.
any documentation or solution?
thanks in advance,
Suresh Yerra.

Dear All,
Is there is any documentation to do the modifications of NWBC's webdynpro screens?
for example, there is a standard webdynpro screen in NWBC from SAP best practices to create sales order (lean). The lean sale order screen having restricted elements and tabs when compare with standard SAP GUI (t code va01).
So I want to include the few missing tabs for data entry.
any documentation or solution?
Thanks,
Suresh Yerra.

How to put some tabs in sales order item level invisible mode

Hello Gurus ,
Good evening everybody ,
We have some specific requirement from the client - Client does n't want few end users to see the price details in sales so they want the condition tab to be invisible mode in sales order item lvel only for few users i.e the condition tab should not be displayed for that user is this possible ?
Note : I only have idea setting few fields in sales order but not tabs in sales order through screen variant -SHD0
Looking for your inputs
Thanks and regards
Venkat

Hi,
There are a couple of options you can go with.
1) You can use Transaction and Screen variants to create your own ZVariant and then put that to user profile. Allow the user to run only with the variant you setup for the user via authorizations.
2) Get GUIXT software by Synactive, to perform the above task for you.
3) If you happen to have latest version of SAP ECC i.e. 6.0 with EHP3 or above, you can go with NWBC (Netweaver Business Client).
Thanks
Kapil Sharma

Address no. in delivery address tab of purchase order

I want to know where is delivery address maintained. I am creating a po with item category K.
I want to change the delivery address. When I save po. it gives address no. in delivery address tab of purchase order.
I want to know what is the tcode for maintaing address.
Is this customisation or master data maintenance.

Hi,
I am working on CR in which I need to change the delivery address.
The purchase order I am referrring is having account assignment category K, without material no. & storage location.
Plants and storage locations have addresses in the system.
With what respect we will maintain address in tcode MEAN.For example plant. ?????
Because in MEAN I create address and save but how this address will pick up in PO.
Edited by: KiranCG on Dec 8, 2011 7:41 AM

Vendor Determination to PR thru componant tab of service order

Hi All,
I have maintain the vendor in notification partner list and then it get copy to service order partner tab after service order creation.
Now when I create the Purchase req. from component tab, Vendor should get determined automatically from service order partner tab. Right now it gives me pop screen which includes list of all vendor for given material and plant.
My requirement is vendor determination in PR thru component tab should always get determined from service order partner tab.
Pl let me know if there is any note to be implemented.
Thanks,
Chetan

Hi,
You have to maintain source list in the transaction ME01 for this vendor as fixed vendor....
Sudhakar

How to customize standard text in operation tab of PM order

Hi everybody,
I am Rajat.
I have question in SAP PM:
In operation tab of PM order we have standard text, rt now i m using fresh system...kindly let me know how to enter values in that so that when i take drop down i'll see those values.
Kindly reply with the path, for customization and t-code or path for master data both.
Thanks
Warm regards
Rajat

and IMG path - plant maintenance and customer service - maintenance and service processing - Assign standard texts for short message to order types
Thanks
S.N

Revision level not appearing in material tab of purchase order

hi
I have matained revision level in material master but it is not appearing in material tab of purchase order and print preview of purchase order
regards
Badari

Hi, If u have created proper change no in CC01 with assigned object material with proper validity period u can give revision level to material.
In order to reflect the current revision level on PO printout, the coding in PO print program should be designed accordingly to pick the latest revision level. PO output needs to be re-issued so that the new output can pick the latest information like PO revision level from the master.
Refer below link also for more information,
[Revision level in purchase order|Revision level in purchase order]

Put Purchase Orders checkbox in the first Tab in sales order window

How do I use UI SDK to put the Purchase Orders checkbox in the first tab in sales order window?

I want to enable the checkbox during form load, therefore I include the following codes:
Case SAPbouiCOM.BoEventTypes.et_FORM_LOAD
                    '// Specifies that SAP Business One application opened a form.
                    Try
                        SBO_Application.Forms.Item(FormUID).Items.Item("104").Click(SAPbouiCOM.BoCellClickType.ct_Regular)
                    Catch ex As Exception
                        SBO_Application.MessageBox(ex.Message)
                    End Try
But it doesn't work.

Field selection in SPRO of Relationship tab in Work Order

Hi,
How to make fields visible/invisible of Relationship tab (if there are any other than the visible ones as default). The tab is seen upon clicking of General button in Operations tab of Work Order iw31.
Thanks
Faisal

Relationships are specific to operations, so of course, you should see by selecting each operation separately.
There are standard fields available, on those, you can hide or make visible. If you want to add new fields which are not standard, there are some screen exits. You may use those to add the fields.
But I am not sure you can add fields in Relationship matrix. You can use field key to add required fields against each operation.

What is the use of confirmation tab in Purchase order ?

what is the use of confirmation tab in Purchase order?

Hello Balaji
In Purchasing, the term Confirmation is an umbrella term for various kinds of information provided by a vendor to a customer with regard to ordered goods.
Possible types of confirmation include the following:
Order acknowledgments
Loading or transport confirmations
Shipping notifications. (Note that shipping notifications may also be referred to by a number of other names, including "advice (note)", "advice of dispatch", "ship notice", and "advance(d) shipping notice" ("ASN").)
A further form of confirmation frequently used in Purchasing is the Inbound Delivery, which is created on the basis of an incoming shipping notification. The shipping notification represents a vendors confirmation to a purchasing organization of a delivery date for a certain quantity of ordered materials (or the date of performance of ordered services).
You can enter incoming vendor confirmations manually. Alternatively, you can receive them via EDI and have them processed automatically.
When working with vendor confirmations, you have the following options:
You can enter the order acknowledgment number if you simply wish to provide a basis for monitoring the receipt or non-receipt of acknowledgments.
You should enter the confirmed quantities and delivery dates if you wish to provide more detailed information in support of the purchasing, inventory management, and materials planning/control functions within your enterprise.
Regards

Adding View/tab TO service Order Item Level

Hi All,
I am using CRM 5.0 SP3. I need to add a new View/Tab on SERVICE ORDER at Item Level Details.
This view consist of Some Custom Field (like IO Box, Drop down etc.)
I have created the view but not able to understand how to add this view to the Item level details. I gone through the Cookbook, but not getting a clear idea of how to add this custom view there.
I want to add this view like there are other view at Item level Details For Example "SLA Info","Notes" & "Partners", "Z view" (This Should be my custom view).
Any hint will be very help full.
Abhinav

I assign the New z view into the viewset (ServViewSets.xml) and define the navigation link( in ServNavigationalLinks.xml as well. but when i am clicking on the link from the ServSLA, i am getting following errors.
An exception occurred during the activation of target view ZServEvnt1 for the navigation
An exception has occurred
Exception Class CX_BSP_INV_PAGE
Text: BSP Exception: Das Objekt ZServEvnt1.do in der URL/sap(bc/bsp/sap/crm_ic/ServItemViewSet.do ist nicht gültig.
Program: CL_BSP_PAGE_BASE==============CP
Include: CL_BSP_PAGE_BASE==============CM01A
Source Text Row: 117
An exception occurred in inbound plug IP_DEFAULT of target view ZServEvnt1
An exception has occurred
Exception Class CX_SY_REF_IS_INITIAL
Text: Dereferencing of the NULL reference
Program: CL_BSP_WD_WINDOW==============CP
Include: CL_BSP_WD_WINDOW==============CM004
Source Text Row: 47
any help
abhi
Edited by: abhi on Sep 4, 2008 8:56 AM

Bapi to update delivery date in confirmation tab in purchase order me22n tc

Hi All,
I am writing a BDC to update the data in confirmation tab for puchase orders for enjoy transaction.
Please let me know how to updated delivery date in confirmation tab in purchase order(ME22N) using a bapi.
I tried using BAPI_PO_CHANGE but found no parameter related to confirmations tab. this BAPI has every thing to update like header data, item data, scheduling data..... except confirmation.
So please let me know how to update the data in confirmation.
We need to use only enjoy transaction ME22N not ME22 in BDC thats why we are looking for a BAPI.
Regards,
Venkat

Hi
Check the table parameter POCONFIRMATION in BAPI_PO_CHANGE
U can see the field DELIV_DATE in the structure BAPIEKES.
DELIVERY_DATE in the structure BAPIMEPOSCHEDULE as well.
Regards,
Dwaraka.S
Edited by: Dwarakanath Sankarayogi on Feb 5, 2009 7:57 AM

Extra tab in Purchase Order

Hi ,
Using BADI definition ME_GUI_PO_CUST, we created implementation ZPBS_FS_MM_PO for adding adiitional tab in Purchase Order Screen-- Tcode ME23.
But, the extra tab is not being shown ...Iam not able to understand what the problem is...
Iam pasting the code...Please guide me..
method IF_EX_ME_GUI_PO_CUST~SUBSCRIBE.
DATA: ls_subscriber LIKE LINE OF re_subscribers.
we want to add a customer subscreen on the item detail tab
CHECK im_application = 'PO'.
CHECK im_element = 'HEADER'.
each line in re_subscribers generates a subscreen. We add one subscreen in this example
CLEAR re_subscribers[].
the name is a unique identifier for the subscreen and defined in this class definition
ls_subscriber-name = subscreen1.
the dynpro number to use
ls_subscriber-dynpro = '9000'.
the program where the dynpro can be found
ls_subscriber-program = 'ZPBS_FS_MM_MM01_SUBSCREEN'.
each subscreen needs his own DDIC-Structure
ls_subscriber-struct_name = 'ZMEPO_BADI_STRUCT'.
a label can be defined
ls_subscriber-label = text-001.
the position within the tabstrib can be defined
ls_subscriber-position = 10.
the height of the screen can be defined here. Currently we suport two screen sizes:
value <= 7 a sevel line subscreen
value > 7 a 16 line subscreen
ls_subscriber-height = 7.
APPEND ls_subscriber TO re_subscribers.
endmethod.
Thanks,
---Shivaa....

s, darek i created d screen....
wat else could b the reason?

Add new tab in Sales Order(VA01/02/03)

Hi All,
Additional Tab A and Tab B in Sales Order (header) are already used for other developments so I need to add a new tab in Sales Order header/item. (I have already updated the table VBAK/VBAP with the include structure).
Could anyone give the steps as to how I could proceed ?.
Thanks,
Kushi

Hi Kushi,
You can use screen 4459 or 4462 in program SAPMV45A which are the item additional data A or B tab to add your custom fields. In order to capture the data from this custom fields you can use user exit USEREXIT_SAVE_DOCUMENT_PREPARE OR USEREXIT_SAVE_DOCUMENT in program MV45AFZZ.
Please check this link for more information on sales order user exits.
http://help.sap.com/saphelp_46c/helpdata/en/1c/f62c7dd435d1118b3f0060b03ca329/content.htm
Regards,
Ferry Lianto

TAB IN PM ORDER

Similar Messages

Maybe you are looking for