Tab layout for asset master
hi kings
I am unable to find the tabs in assets accounting. Because at the time of asset master creation i am getting only 4 tabs. So i want to add some more tabs in the asset master. So how it is possiable to maintained the laout tab in the asset master.
regards
ram
hi EC
I am explain the problem :
At the time of asset master creation i can found it only 4 tabs i.e general,time-dependent,Allication,Depreciation areas.
But i want some more tabs like Origin,Insurance,Networth tax. in Asset master records.
As per my knowledge i am maintained the one layout and in that layout cantains the all the tabs in asset accounting. That layout has been assign to respective asset class.
Eventhough i am not gettting the all the tabs in asset master. So i do for the my issue.
regards
ram
Similar Messages
-
Change/ Add screen in Group Box specify tab layout for Asset master Record
Hi All,
I need to add or change group box in specify tab layout for Asset Master Record. Please advice where i can change or create new Group Box.
Thanks & Regards,
PankajHi,
Try at below path:
Financial Accounting (New)>>Asset Accounting>>Master Data>>Screen Layout>>Define Screen Layout for Asset Master Data.
here you can change the layout for the same.
Kind Regards,
Mehul -
What is maintanence level in screen layout for asset master record
hi everyboby,
can anyone explian this
when I'm defining screen layout for asset master record to make business area as required entry it was throwing msg like select maintanance level. what could be the reason?can anyone help me on this.
thanks
sirihi..
thanks for reply again.
If i select business area as optional (main no,sub no)and supress for all fileds (only selected main no) ,I'm able to save screen layout.If i set BA as required select mainno,sub no check box and save it shows the same error msg.Anyway i can create asset master now.thanks
regards
siri -
Screen Layout for Asset Master Data
Hi all,
we are using SAP ECC 6.0 with a base component 700 Level 15 and the Logistics and Accounting component 600 Level 12.
I hope you can help me with the following tasks. It should be said that I am not an expert FI-AA, so you must bear with me.
It is desired, that the Screen Layout for asset master data, should have an additional field "customer order" as a required field.
So I go to the Customizing
--> Financial Accounting --> Asset Accounting > Master Data> Screen Layout--> Define Screen Layout for Asset Master Data --> Define Screen Layout for Asset Master Data
--> and then into the third level of navigation in the u201Cfield group rulesu201D (rule for R & D development costs and then logical field group time-dependent data)
So there I should be deposited the "customer order" as a required field.
But:
1. The "customer order" is not available in any field group. How is it possible that I add the u201Ccustomer orderu201D to a field group?
2. I am not able to add any field, in the above transaction?
I am very grateful for any help.
greetingsDear all,
I want to come back to my problem listed above.
In the APC Values Posting (Transaction ASKP) the costs have been assigned to a WBS element. Now, it should not be assigned to a WBS element, but to a customer order.
For that I created in the asset master a new customer's own field "Customer Order".
For this I have implemented the customer enhancement AIST0002 (Customer fields in asset master).
The new field "Customer Order" is now available in the asset master as desired.
So far so good.
Now, the new field "Customer Order" must be specified and activate as an Account Assignment Object.
Is this possible and how can I add my new field to an Account Assignment Object?
Thanks in advance for any help.
greetings
Martin Buthmann -
Hiii gurus
We are uploading data from April ' 07 till now..while uploading data i have entered the closing balances of assets and for group assets..
Now in the month of April & May ' 07 , in Asset master template i forgot to enter Group Asset no. in Asset master data ( AS01 ). And the assets also capitalised in the relevant months.Now i have to give ( Assign ) Group Asset no. in Main Asset , but the field Group Asset in Main Asset is Suppressed.
Plsss tell me how to make link between Group Asset and Main Asset after the acquisition ???
Thanks & Regards
RamkiHi,
Try at below path:
Financial Accounting (New)>>Asset Accounting>>Master Data>>Screen Layout>>Define Screen Layout for Asset Master Data.
here you can change the layout for the same.
Kind Regards,
Mehul -
hi folks,
can u share the TABLE NAME FOR ASSET MASTER
Thanks in Adv
Regards,
Varmahi Prasad,
ANLA Asset Master Record Segment
ANLB Depreciation terms
ANLBZW Asset-specific base values
ANLC Asset Value Fields
ANLE Asset Origin by Line Item
ANLH Main asset number
ANLI Link table for investment measure -> AuC
ANLK Asset Origin by Cost Element
ANLP Asset Periodic Values
ANLQ Period values from dep. posting run per po
ANLT Asset Texts
ANLU Asset Master Record: User Fields
ANLV Insurance data
ANLW Insurable values (year dependent)
ANLX Asset Master Record Segment
ANLZ Time-Dependent Asset Allocations
hope this helps
ec -
Error when creating a bdc for asset master upload
I am getting a warning message (AA186), when changing the depreciation start date to capitalization date. It says,
"Different Order Dep. start date in depreciation area 01. Check"
This error is a problem in creating the BDC for asset master upload. We have only one depreciaton area 01 (book dep).
Please help.This is normal message you get when you try to change depn start date. I think this should not be a problem for BDC posting. This message can always be bypassed.
-
Hi
In asset master layout setting, we tell system which all fields needs to be made mandatory at the time of creating asset master. This setting we do at screen layout and this screen layout is assigned to asset class.
I want to know table where i can see these fields and i can see which all fields are madfe mandatory, optional, etc.Hi
I do not know how to check asset segment record. So I used T082A. I gave screen layout in the input parameter and i pressed 'execute'
But it showed screen layout and its description. But it didn't show setting of every field (like madatory, display, optional, supress).
I also tried T082B. But i am not getting how to view.
Is there separate table for it?
Edited by: Deepak Agrawal on Feb 29, 2012 1:59 PM -
How to activate fields under origin tab in the asset master data
Hello Gururs,
While creating asset master data under origin tab there are two fields in display mode . I am unable to change these fields . the fields are 1.) Asset purchase new. 2.) Purchase used. I want to check one of these two check boxes. But they are in display mode. How can i activate these two fields.
In asset master data screen layout also i didnot find these two fields under origin category . Pls advice
regds
RamachandraHello Markus ,
Thanks for your reply. I checked through Group box info then system is showing the following message .
status - DISPLAY
Reason - Authorization for asset view used
In screen layout field i didnt find these two fields . Can you tell me where these settings has been done . How to change the status for these fields.
regds
ramachandra -
Man/Assessed val.ind in the net worth tax tab of the Asset Master.
Hi Friends,
Checkbox Indicator:Manl net worth tax val. field in the Net worth tax tab is optional in the screen layout rules for an Asset class. But the Check box is not appearing before the manual networth value field in the Asset master data. Could you please through some light on this why it is not appearing in the Asset Master even it is optional in the screen layout rules.
Thanks and Regards
Koteswararao PadartiHi Bernhard,
First of all thanks for your response. The maintenance level in the screen layout is at Main Asset number. Just for understanding, Even if the maintenance level is at Asset class level only the default values should flow to the master and it should be modifible at Asset Master level.
In My case the maintenance level is at Asset Main number level, but still it is not appearing. Please let me know is there any thing else can effect this field status?
Thanks and Regards
Koteswararao Padarti -
Substitution not happening for Asset Master
Hi Experts,
I have created a substitution rule in OACS to update Depreciation key based on the Evaluation Group while creating Asset Master Record. After this when i simulate the system was giving value for the LVA Key as designed but however when i run the actual transaction it does not populate. Currently the substitution is working for the other steps created under the same substitution rule for other fields in Asset Master record.
Also let me know if the default made at Asset Class level for the depreciation key has any impact on this substitution
Regards
ZehranAlso i notice that when i create the asset in the test system with expert total trace, the substitution is triggered when the values is entered in the Time Dependent tab and the input for the substitution is available in the allocation tab. Even if the data is entered in allocation tab first, the system is triggering the expert trace with TRUE condition for the substitution but the values are not populated in the depreciation tab for the depreciation key
Regards
Zehran -
Enhancing tabstrip for asset master
Hello,
I need to create an extra tab in a tabstrip control in Asset Master (tcode AS03). To that tabstrip I have to add 4 fields, the struture for which was already defined in customer include (CI_ANLU).
Fields in CI_ANLU:
ZZACQMETH
ZZMOVATT
ZZCUSTOD
ZZPURPOSE
How do I go about accomplishing this?
Thank youHi Andrei,
Below are the possible enhancements for the transaction AS03.
AAPM0001 - Integrtn of asset accounting and plnt maintn.
AFAR0003 - External changeover method
AFAR0004 - Determnt. of proportional values for retirement
AINT0004 - Change amount posted for certain areas
AINT0005 - Dummy for extended syntax check. Do not use.
AISA0001 - Assign Inventory Number
AIST0001 - Exchange number range in master data maintan.
AIST0002 - Customer fields in asset master
AMSP0002 - Determn. relationship type for 2 company codes
TRAN0001 - User exit for asset transfer
In this I think the enhancement <b>AIST0002 - Customer fields in asset master</b> will solve your purpose.
Check the Documentation avaliable for this enhancement in SMOD and create a project in CMOD.
Reward me if the points are valuable.
Regards,
Prakash. -
Summary Tables for Asset Master?
I need to create an asset/insurance data report, using SAP Query, which shows the asset master record balances only (acquisition and posted depre'n) as at report selection date.
Are there any summary tables for fixed assets that are equivalent to GLT0, KNC1 and LFC1 for GL, Customer and Vendor?
Thanks in advance for any assistance.
Best regards,I am not sure about ANEP or know how to use it. It only has data records for the fiscal year when there is posting to acquisition values field u201CAmount postedu201D for the asset. No data records for other years with posted depreciation.
-
Substitution exit for asset master is not getting triggered.
Hi
I have created a substitution exit program ZGGBS000 having exit U215 and U216. If the Asset affirm value is initial , then WBS elemnt value will copied to asset affirm value field in the table ANLA.But it is not getting tiggered, when i am trying i save the asset in AS01 tcode. Kindly help.
Thanks
SubhaHi,
Please try thes exits:
Enhancement AIST0001 Exchange number range in master data maintenance
Here we can export both ANLA-ANLN1 ANLA-ANLN2 and Import VALUE(I_ANLA) LIKE ANLA STRUCTURE ANLA
AIST0002 Customer fields in asset master
Alternative exits:
AFAR0003 External changeover method
AINT0005 Dummy for extended syntax check. Do not use.
AISA0001 Assign Inventory Number
TRAN0001 User exit for asset transfer
AAPM0001 Integration of asset accounting and plant maintenance
AIST0002 Customer fields in asset master
AMSP0002 Determine relationship type for two company codes
AIST0001 Exchange number range in master data maintenance
AFAR0004 Determination of proportional values for retirement
AINT0004 Change amount posted for certain areas
I hope this may helpfull.
Thank you,
Thanks,
AMS -
Integrating MDG in Financial Self Service for Asset Master Data creation in CRM portal
Hello Experts,
I have a requirement in CRM box.
If we navigate to SAP menu we have Self Service -> Financial Internal Self Services.
Then a portal page will open in browser. There we have link Master Data Services.
In that link we have standard sublinks for some financial master data creation.
This is coming from LPD_CUST(Launchpad Customizing) -> FINISS. In this Master Data Services we have to create new link for "Create Asset".
We can't go for Transactional iView. We have to choose Application Type as Web Dynpro ABAP only as present in standard links.
And in the Application USMD_ENTITY_VALUE2 should be present as generic UI component.
But after that what needs to be done for asset I am not getting. We have to do some config for component for web dynpro component, entity types, UIBB etc. InSPRO also, Cross-Application components ->Process and tools for Enterprise Applications -> MDG -> General Settings also we have to do something. I have collected info in isolated way.
How to approach for this. Please suggest.
Regards,
Somnath MitraHello Experts,
I have a requirement in CRM box.
If we navigate to SAP menu we have Self Service -> Financial Internal Self Services.
Then a portal page will open in browser. There we have link Master Data Services.
In that link we have standard sublinks for some financial master data creation.
This is coming from LPD_CUST(Launchpad Customizing) -> FINISS. In this Master Data Services we have to create new link for "Create Asset".
We can't go for Transactional iView. We have to choose Application Type as Web Dynpro ABAP only as present in standard links.
And in the Application USMD_ENTITY_VALUE2 should be present as generic UI component.
But after that what needs to be done for asset I am not getting. We have to do some config for component for web dynpro component, entity types, UIBB etc. InSPRO also, Cross-Application components ->Process and tools for Enterprise Applications -> MDG -> General Settings also we have to do something. I have collected info in isolated way.
How to approach for this. Please suggest.
Regards,
Somnath Mitra
Maybe you are looking for
-
In the new iphoto app, why can't i save multiple images to camera roll at once?
why can't i save multiple images to camera roll at once? it seems i can only save one at a time and its very frustrating.. the options seem to be there, they are just greyed out and i cant click on them. at first i thought its because the images were
-
HT4796 Can I copy musics from my ipod shuffle to my iTunes?
I have musics in my ipod shuffle which had been played for many years. The copy in my iTunes of old PC had been lost. Is it possible to copy all these musics from ipod shuffle to my new iTunes in new PC?
-
HI friends. i am getting following error while creating rfc deatination. Plz suggest me the needful. Exception Message:TYPE=A STATE= INFO_SHORT=com.sap.mw.jco.JCO$Exception: com.sap.mw.jco.JCO$Exception: (102) JCO_ERROR_COMMUNICATION: JCO.Client not
-
using cs4 ext. on vista x64. crashes when i try to change fonts (doesn't matter which font), and sometimes when i just click on the type tool itself. everything else seems to work just fine.
-
Bluetooth and keyboard system preferences not working
Hi all, When I try to change the keyboard system preferences or the bluetooth system preferences, the 'application' locks up (Doesn't bring up any details, force quit gets out of it). I've tried leaving it for ages to see if it eventually opens but i