Tab not getting focus on left-click after suspend in Windows 7 64-bit.

When I left-click on a tab in Firefox 4 rc 2 after my pc wakes up from suspend in Windows 7 64-bit the tab is not getting focus. I have to use the hotkeys in order to move to that tab. My mouse works fine in other programs.

I have an imac
I have an magic pad (same thing as the touch pad on a macbook really)
I have an usb mouse I use both in windows and osx
if your trackpad somehow was registered as actived for some reason it would seem as if it was the mouse
had some *** situations both in windows and osx when my cat sit on the magicpad

Similar Messages

Modal Dialog does not get focus on first click

Hi,
Identified an issue in Windows Safari 5 with Modal Dialog boxes. The below is issue.
When a Message box (Validation message) is displayed to the user the control is not getting transferred to the message box instead it still lies with the parent page.
For Example:
A list box is visible with values in parent page, when you click delete, the confirmation message pops up.
On the mouse click on confirmation message, the focus would be changed to an item in the list box of the parent page and that particular item gets deleted instead of the selected item.
Understanding:
-When a Modal dialog box is displayed control is not passed to the Dialog box .
-Once the user click mouse once then the control is passed to the Dialog box.
-The second mouse click only the action is performed.

Work-around: Click on the "title bar" of the modal dialog box. You now have control. If you click other areas of the modal dialog before clicking the title bar, it will usually register behind the box.
I think Apple forgot the code to 'select the modal dialog' after 'displaying it', which is why the work-around works perfectly.
It's a common bug that hasn't been fixed yet in 5.x that did not exist in 4.x. I would submit a bug report and hope they fix it in the next update.

STO - Excise tab not getting displayed in material document after posting.

Dear all,
We are facing an STO issue where in after we have done the receipt at the receiving plant with excise, the excise tab does not display in the GR material document.
It is plant to plant stock transfer with excise, the process that we are following as given below:
1) STO PO - ME21N
2) Outbound delivery - VL10B - Post PGI in VL02N
3) Outgoing excise invoice - J1IIN - With the key DLFC.
4) GR - MIGO with excise invoice capture.
During GR posting in MIGO screen the system does display the excise tab, we enter the outgoing excise number and the corresponding values appear in BED, ECS and HCES. We post the GR material document.
But after posting the material document if we display the same GR material document it does not show the excise invoice tab. And since we are not having part 1 entry number we are not able to post the part 2 entry in J1IEX.
Request to please do let us know if we have missed out on any configuration or master data.
Regards,
mahesh.

Hi,
Do the all customization setting for CIN for reference check the following link for India. and Material management
http://help.sap.com/bp_bblibrary/600/BBlibrary_start.htm
You have to maintain Excise master data for material,vendor and PLant in J1ID .
reward if helpful,

How to make a JScrollPane not getting Focus?

How to make a JScrollPane not getting Focus?
When i tab out from a textfield inside a scroll pane focus is going to ScrollPane .And if i press tab once more then only focus is going to other textField which is outside the scrollpane.
For me when i press tab from a text field inside a scrollPane ,i should go to textfield out side the scroll pane.
satish

Hi,
I've the same problem, that I have to double click on tab
to step from a textfield with a scrollpane to the next textfield in my panel.
I tried to implement a FocusListener on my JScrollPane, but without success.
Can you tell me in detail how to implement this listener ?
Kind regards
Andy Kanzlers

Swing JTextFeild is not getting focus - Using jdk-7u17-windows-i586

Hi All
Recently I upgraded my Application with Java 1.7 (using jdk-7u17-windows-i586) from java 1.6. Swing component JTextfeilds used to get focus when using java1.6. But after up-gradation to Java 1.7 in few scenarios JTextFeild is not getting focus and I am unable to do any thing with keyboard. Again I have to click on some button with Mouse and need to keep focus using mouse in the textfeild.
OS : Windows
Used Java Version : jdk-7u17-windows-i586
Issue : JTextFeild is not getting focus

993277 wrote:
Hi All
Recently I upgraded my Application with Java 1.7 (using jdk-7u17-windows-i586) from java 1.6. Swing component JTextfeilds used to get focus when using java1.6. But after up-gradation to Java 1.7 in few scenarios JTextFeild is not getting focus and I am unable to do any thing with keyboard. Again I have to click on some button with Mouse and need to keep focus using mouse in the textfeild.
OS : Windows
Used Java Version : jdk-7u17-windows-i586
Issue : JTextFeild is not getting focusThat's an incomplete bug report, not a question. This is a forum, not a bug tracking system. Try bugs.sun.com. And you may want to include a small sample program in the bug report that demonstrates the problem.

Custom Tab not getting high-lighted

Custom Tab not getting high-lighted
Hi,
I have added a new tab TabX in Item Master data form.
When only my add-on is running, it is working properly:
When I click on the TabX, all the controls belonging to the tab are displaying correctly.
TabX control is getting highlighted.
When my add-on runs with another add-on (DBS):
When I click on the TabX, all the controls belonging to the tab are displaying correctly.
But, TabX is not getting highlighted. Instead, some other tab(purchasing tab) is getting highlighted.
1) I'm not sure what is done by the other add-on.
2) I cannot debug my add-on when the other add-on is running. (Because we cannot get the other add-on installed in our office network. It is running only in client site.)
So, I need to 'guess' what might solve this problem.
Please help me if you know any work-arounds, so that I can highlight TabX (The normal effect of pressing a tab) in this situation.
Thank you.
Regards,
Geetha

Hi Geeta,
on FormLoad event,add the panelevel and set the panelevel of the Items.(must ber unique on that form)
OnLoadAfter(ref SAPbouiCOM.ItemEvent pVal, out bool BubbleEvent)
            BubbleEvent = true;
            AddNew_IndirectCost_Tab()
private void AddNew_IndirectCost_Tab()
                 oForm.DataSources.UserDataSources.Add("Folder", SAPbouiCOM.BoDataType.dt_LONG_TEXT, 100);
                oItem = (SAPbouiCOM.Item)oForm.Items.Item("36");
                oNewItem = oForm.Items.Add("oFldrCost", SAPbouiCOM.BoFormItemTypes.it_FOLDER);
                // oNewItem.AffectsFormMode = true;
                oNewItem.Top = oItem.Top;
                oNewItem.Height = oItem.Height;
                oNewItem.Width = oItem.Width;
                oNewItem.Left = oItem.Left + oItem.Width + 50;
                oFolder = (SAPbouiCOM.Folder)oNewItem.Specific;
                oFolder.DataBind.SetBound(true, "", "Folder");
                oNewItem.AffectsFormMode = false;
                oFolder.Caption = "Indirect Cost";
                oFolder.GroupWith("36");
                oItem = (SAPbouiCOM.Item)oForm.Items.Item("60");
                oNewItem = oForm.Items.Add("LblMacCost", SAPbouiCOM.BoFormItemTypes.it_STATIC);
                oNewItem.Top = oItem.Top;
                oNewItem.Height = oItem.Height;
                oNewItem.Width = oItem.Width + 20;
                oNewItem.Left = oItem.Left;
                *oNewItem.FromPane = 222;*      // set pane level
                *oNewItem.ToPane = 222;*          //set panelevel
                oStaticText = (SAPbouiCOM.StaticText)oNewItem.Specific;
                oStaticText.Caption = "Actual Machine Cost";
on click of the your pane set the panelevel, like;
protected override void etClickBeforeAction(ref SAPbouiCOM.ItemEvent pVal, out bool BubbleEvent)
            BubbleEvent = true;
             if (pVal.ItemUID == "oFldrCost")                    // oFldrCost-My pane,
                 oForm.PaneLevel = 222;
The main thing is that you have to set the form's panelevel on click_before event and youe pane will be high lighted

[OpenBox] Window not getting focus if skip_taskbar is set to 'yes'

I have bound gmrun to ALT-F2. When I have skip_taskbar set to yes in rc.xml, gmrun does not get focus. This is quite annoying as I have manually click on it to get the focus.
<application name="gmrun">
<position>
<x>center</x>
<y>center</y>
</position>
<focus>yes</focus>
<layer>above</layer>
<skip_taskbar>yes</skip_taskbar>
</application>
If, however, I remove skip_taskbar as shown below, gmrun get its focus when launched.
<application name="gmrun">
<position>
<x>center</x>
<y>center</y>
</position>
<focus>yes</focus>
<layer>above</layer>
</application>
* Same issue with mplayer/terminal - Doesn't get focus when skip_taskbar is set to 'yes'.
Last edited by keerthi (2008-10-03 19:45:36)

I have the same problem, but, and this part is really bad, I also mostly don't have this issue.
So I can't help except to say I run OB 3.4.7.2 and [sometimes!] have the same issue as you.
-dav7
Last edited by dav7 (2008-10-04 03:49:06)

This morning my PB G4 would not get to the password screen after power on. I have rebooted many times and very loud noises (like a HD spinning/rubbing) emits. Tried the Install disk and it cannot find the hard drive. Ran HW test and got a "Mass storage E

this morning my PB G4 would not get to the password screen after power on. I have rebooted many times and very loud noises (like a HD spinning/rubbing) emits. Tried the Install disk and it cannot find the hard drive. Ran HW test and got a "Mass storage Error Code" message.
Did my HD just crash and unrecoverable? Time to replace my notebook?

I believe your hard drive has failed. Hope you have a backup.
Failing Hard Drive Sounds http://datacent.com/hard_drive_sounds.php
Listed by drive manufacturer. Click on the > next to the drive & you will hear the typical failure sound.
How to Tell When Your Hard Drive is Going to Fail
http://www.lifehack.org/articles/technology/how-to-tell-when-your-hard-drive-is- going-to-fail.html
Grinding And Clicking – Symptoms Of A Failing Hard Drive
http://pcperformancetools.com/getdata/grinding-and-clicking-symptoms-of-failing- hard-drive.html
Failing Hard Drives
http://losangelescomputerhelp.com/computer_networking_news/failing-hard-drives.h tml
 Cheers, Tom

After 04 months of purchase of iphone 5 the lock button is too hard. At times its not working at all. The phone has been purchased in USA now I'm not getting service in India. After all whats the point in spending so much amount without any service.

After 04 months of purchase of iphone 5 the lock button is too hard. At times its not working at all. The phone has been purchased in USA now I'm not getting service in India. After all whats the point in spending so much amount without any service.

The warranty says that Apple may restrict service of an iPhone to the country of sale, and any reliable salesperson will tell you that if you tell them that you plan to use the iPhone in another country. Such service restrictions are common with cellphones and are by no means limited to Apple's phones.
Sorry, but if your iPhone requires service, you will need to send it to someone you know in the US who can get it serviced and then send it back to you.
Regards.

HT2173 my iMac will not get past the start screen, after i restarted it after it not being able to upload my photos from my iPhone 4S to iPhoto app on my iMac bc a visa vas about 3:15 min

my iMac will not get past the start screen, after i restarted it after it not being able to upload my photos from my iPhone 4S to iPhoto app on my iMac bc a visa vas about 3:15 min. What should I do to get my imac past this?

According to your posted Profile here you are running a PPC based iMac. This Forum is only for "Intel iMac's", and so to get the expert and correct help you need you should repost your question in the "PPC iMac Forum".
Hope this helps

Toolbar icons are not getting focus

The buttons on the toolbar are not getting focus when I move the mouse over the buttons. I am facing this problem if I use JRE 1.5.0_15 but it is working fine in JRE 1.6.0_6.
But I need solution in JRE1.5.0_15.
Can anybody please help me out is there any work around in JRE 1.5.0_15.
Regards
Venkat

I found the solution, We need to change
some coding style by giving conditions for particular version , foe example we should make changes in color initialisation. Insteatof color.red , use [RGB,1,0,0] and many.........

Sub menu not getting focus/highlighted

Hi,
I am facing issue where Sub Menu dosent get highlighed
I have followed following steps
I have created a new customized page.
Then I have created a function for this customized page
I have included this function in Menu
So when i navigate to the desired menu,i can see my sub menu.
Once i click on the sub menu my page gets displayed.
Only issue I am facing is that My sub menu is not getting highlighted (When i click
on Oracle Sub menus they do get highlighted)
Do i need to set some attributes at PageLayout ? Any clues ?
Thanks,

Within your processRequest, please call pageContext.resetMenuContext and pass your menu function name.
pageContext.resetMenuContext("MY_MENU_FUNCTION");

What can I do if I get an internal power error after upgrading to Windows 10?

QuestionWhat can I do if I get an internal power error after upgrading to Windows 10?
AnswerSome laptops with AMD graphics that upgraded to Windows 10 are showing blue screens with error messages regarding Internal_Power_Error. If you receive this error, try the procedure in this article.
First, you'll need to quickly set the boot options to Safe Mode:
1. Hold the Windows key and press 'R' to open the run box.
2. Type MSCONFIG, then press ENTER.
3. Select the BOOT tab.
4. Under BOOT OPTIONS, check Safe boot, then select Minimal.
5. Click Apply, then OK.
6. Click Restart. (If prompted, click Restart anyway.)
From Safe Mode disable the AMD Display Driver:
1. Hold the Windows key and press the 'X' key to open a menu in the lower-left.
2. Click Device Manager.
3. Expand Display adapters to show the two display adapters.
4. Double click AMD Radeon R9 M200X Series.
5. Select the Driver tab.
6. Click Disable, then click Yes to confirm.
7. Click Close.
8. Hold the Windows key and press the 'R' key to open the run box.
9. Type MSCONFIG, then press ENTER.
10. Select the BOOT tab.
11. Uncheck Safe boot.
12. Click Apply, then OK.
13. Click Restart. (If prompted, click Restart anyway.)
From Windows 10 started with the AMD Display Driver disabled:
1. Hold the Windows key and press the 'X' key to open a menu in the lower-left.
2. Click Device Manager.
3. Expand Display adapters to show the two display adapters.
4. Double click AMD Radeon R9 M200X Series.
5. Select the Driver tab.
6. Click Update Driver.
7. Click Search automatically for updated driver software.
8. An AMD driver should be found and installed.
The driver that originally caused this problem is AMD display driver version 15.200.1046.2 dated 7/15/2015.
The driver installed through this process might have an older date, such as 15.200.1055.0 dated 7/6/2015. That's okay.

I'm having the same problem. I got error message 21. I went to apple store. they are saying i have a hardware error. Really, my phone was working before the update. Asked me for $150 to get another one when I am due to get a new one and wanted to pass this one on to my child.
Help please,
I will be glad to go back to the older software update

When I try to Bookmark a new page, I do not get the "Page Bookmarked or Edit This Bookmark" window. I t does place the site into my bookmarks but I have to go to "organize" bookmarks in order to put it where it belongs.

When I try to Bookmark a new page, I do not get the "Page Bookmarked or Edit This Bookmark" window. I t does place the site into my bookmarks but I have to go to "organize" bookmarks in order to put it where it belongs.

How are you saving a new bookmark?
There 5 ways to save a new Bookmark in Firefox, the first 4 should offer to save the new bookmark in a folder:
1.
2. Right-click and select Bookmark this Page.
3. Bookmarks > Bookmark this Page
4. Double-click the Star that is on the right side of the Location bar.
4a. (A single-click on the Star will save the new Bookmark to the Unsorted Bookmarks folder, without opening the Edit this Bookmark dialog.)
5. Drag the website image in the URL bar into the Sidebar view of Bookmarks
or to the Bookmarks menu bar item and then into the drop-down or onto the Bookmarks Toolbar

I can not get Premiere Elements 11 to work on my Windows 7 , proffessional computer.

I can not get Premiere Elements 11 to work on my Windows 7 , proffessional computer.

goldstein
Please define what you mean by
I can not get Premiere Elements 11 to work on my Windows 7 , proffessional computer.
Can you not install the program? If you cannot, how are you installing it, from an installation disc or installation files from Adobe? Are you looking at the tryout or a purchased product? At what stage of the installation are you blocked and with what messages? Do you have the anti-virus and firewalls turned off? Do you have another other computer protective software installed such as NetNanny?
If you are getting through the installation OK, are you able to Sign In after the installation and restart of the computer?
If you get into the opened project, when does the problem first manifest itself? Is the problem in a new project or in an existing one?
Is the problem in one of the editing features?
Is the problem in one of the export choices?
Other?
The answers will be in the details which allow us to help you.
Thanks.
ATR

Tab not getting focus on left-click after suspend in Windows 7 64-bit.

Similar Messages

Maybe you are looking for