Tab rulers are not locked to text blocks

I have a brand new (2 weeks old) iMac working with CS4. I work in Prepress so my typesetting skills are a bit rusty...
I am trying to work with the tab ruler. If I am viewing as a full page and have my text block selected, my tab rulers open up to the correct size on my text block. However since my document is quite large and my text block is tiny when viewed as full page, I am zooming into my text block to be able to see it correctly. My Tab rulers stay locked to the size and space of my full page viewer, even if I close my ruler and zoom in, then re-open it. What am I doing wrong?

P Spier wrote:
The tab panel can be automatically sized and positioned over a column by by clcikinb the little magnet inthe lower right corner, but ONLY if there is enough space on the screen to put it above the column.
To clarify: That is, only if the entire width of the column is on screen, and only if your left sock is inside out (right sock during daylight savings time).

Similar Messages

I have a folder and 3 files stuck on my desktop. When I drag them to the trash I am asked to enter my administrator's password. I do this but the files and folder will not delete. I have checked 'Get Info' on each of them and they are not locked?

I have an empty folder and 3 .jpg files stuck on my desktop. When I drag them to the trash I am asked to enter my administrator's password. I do this but the files and folder will not delete. I have checked 'Get Info' on each of them and they are not locked and I have full read & write access. Grateful for any assistance in solving this problem.

Back up all data.
Triple-click anywhere in the line below to select it:
ls -@Oaen De* | open -f -a TextEdit
Copy the selected text to the Clipboard (command-C).
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window (command-V).
A TextEdit window will open with the output of the command. Post the contents of that window, if any — the text, please, not a screenshot. The title of the window doesn't matter, and you don't need to post that.
If any personal information appears in the output, anonymize before posting, but don’t remove the context.

An apple representative told me its ok to buy a Ipad mini wifi cellular because they are NOT locked devices, I can just take the at

An apple representative told me its ok to buy a Ipad mini wifi cellular because they are NOT locked devices, I can just take the at&t chip out and put in another carrier. and it will work

I thought apple change the name from Wifi + 3G to Wifi + Cellular because it has features to work just like a cell. e.g. recive calls and text etc.
My question is can it really do that? or is their an app I can down load to received calls with the cellular data number and also send out calls? or sms messages?

In iTunes on my windows 7 PC, the Edit/Preferences dropdown window,some of the tab windows are not large enough to see all options that are available. The borders of the window cannot be draged larger. As a result, I can not uncheck or check some box's.

In iTunes on my windows 7 PC, in the Edit/Preferences dropdown window,some of the tab windows are not large enough to see all options that are available. The borders of the window cannot be draged larger. As a result, I can not uncheck or check some box's on several of the preferences pages. The Apple people at the store did not help. I have lownloaded the latest version of iTunes and this is still an issue. HELP.

Is there really nobody else with this problem? Really?

Tabstrip wizard- Protected tab titles are not supported

Hello Experts,
I have created a tabstrip using wizard and all the tab buttons and subscreens are working fine except for one warning message I get everytime I pust a tab. The message is
Diagnosis
Protected tab titles are not supported.You cannot print the title on a tab index as the tab index does not support this'.
Procedure
Check the screen modifications or the Screen Painter definitions of the tab title.
When you modify the screen, do not set the INPUT attribute of the tab title to '0'.
I tried changing the input value for the tab buttons to '1', even then its the same error.
Anyone who has came accross such error?
Regards,
Ahmad
Message was edited by: Ahmad Quraishi

Hi,
   I think you are using LOOP AT SCREEN to set some fields in change mode( input mode ).   While do that, it is trying to set the tab titles also as input mode.   So change this to display only by setting the value to 0 for tabstrips.
when setting to change mode, skip the tabstrips as follows
LOOP AT SCREEN.
    IF screen-name EQ 'TAB1'
      OR screen-name EQ 'TAB2'.
      CONTINUE.
    ENDIF.
    screen-input = 1.
    MODIFY SCREEN.
ENDLOOP.

Error - protected tab titles are not supported

Hi,
I get the following error when going to transaction va02, it says
"Protected tab titles are not supported( tab TAXI_TABSTRIP_OVERVIEW title TAXI_TABSTRIP_CAPTIONS-TAB05)
How do i correct this?
Thanks
Keshi

Hi Prasad,
Thanks for ur reply.
Can you please explain a bit so that i can ask one of the basis consultant to do the necessary?
Thanks
Keshi

Protected tab titles are not supported

Dear Experts,
I am working on Tabstrips. I have designed 3 tabs on my tabstrip. when i am looking the screen i am getting a message like "Protected tab titles are not supported".
Does anybody knows how to fix this?
Thanks,
chaitanya.

Error message is like this
Protected tab titles are not supported (tab TABSTRIP title COMPANY)
Message no. 00119
Diagnosis
You cannot print the title on a tab index as the tab index does not support this.
Procedure
Check the screen modifications or the Screen Painter definitions of the tab title.
When you modify the screen, do not set the INPUT attribute of the tab title to '0'.

Protected tab titles are not supported (tab TABSTRIP title COMPANY)

hi gurus
i got error in infotype like this wat is the problem
Protected tab titles are not supported (tab TABSTRIP title COMPANY)

Error message is like this
Protected tab titles are not supported (tab TABSTRIP title COMPANY)
Message no. 00119
Diagnosis
You cannot print the title on a tab index as the tab index does not support this.
Procedure
Check the screen modifications or the Screen Painter definitions of the tab title.
When you modify the screen, do not set the INPUT attribute of the tab title to '0'.

Protected tab titles are not supported(tab tabstr_ 025 title tab1)

Hi,
In training and event mgt module-while maintaining relationship with business event to person subtype A025 after saving the system asking anotherdata that time i got one error iam unable to maintain plz help.
Error:protected tab titles are not supported(tab tabstr_ 025 title tab1)

Hello Prasad,
'Protected' means, that the flag 'input' for the pushbutton of the tabstrip is set to 0. For a normal pushbutton this is allowed but not for a pushbutton which is the title of a tabstrip.
Hoping this clarify.
Kind regards,
Graziela

Deleting Folders/Applications that are NOT locked

I downloaded Windows Media Player online and would like to delete it, but when I attempt to it's saying that certain applications/folders are locked. I then looked at each relevant app/folder under "Get Info" from the pull down menu but it was showing that the files are not locked. I have also tried holding down the option key when emptying trash and nothing seems to work. Can somebody please help me with deleting these files?
Thanks-
wozzy
iMac G5 Mac OS X (10.4)

I made sure there was a space in between "chflags" and "-R" and also between "-R" and the folder I drag in..
When I dragged the folder in and pressed enter I got "usage: chflags [-R [-H | -L | -P]] flags file ..."
...and then after that I dragged the folder from my Desktop to the Trash and it told me "The operation cannot be completed because the item "wmphelp.htm" is locked."
p.s. thanks for sticking with me and helping

Can´t empty my trashcan and my files are not locked

Can´t empty my trashcan and my files are not locked?

See the X-Labs troubleshooting FAQ for the Trash - http://www.thexlab.com/faqs/trash.html.
You should find an answer therein.
Good luck,
Clinton

I cannot rearrange layers in Muse even though they are not locked.

I have seen tutorial videos where people can rearrange the stacking order of the layers in the layers panel. Yet when I try they just won't move. They are not locked, and I have tried the master page and a normal page. Has anyone got any ideas of why others seem to be able to but I cannot.
Cheers
Ian

Ian,
I am having the exact same issue. Not sure what is going on here, but I am searching for a solution.
Jeremy

Why can't I delete mp3 files from my Trash? They are not locked.

Why can't I delete mp3 files from my Trash? They are not locked. I compressed them into a zip file and then couldn't delete that file either. I've restored them and tried deleting again but no luck. Can anybody please help? iOS 10.8.5

You can't empty the Trash or move a file to the Trash
Visit The XLab FAQs and read the FAQ on solving Trash issues. You can also try using Trash It! 5.1 to fix the problem. Or you can try this:
Open the Terminal in the Utilities folder and paste the following at the prompt:
sudo rm -Rf ~/.Trash/*
Press RETURN. Enter your admin password when prompted. It will not echo to the screen. Press RETURN again.

I have problem with my iphone 5 when I talk my ear allways tuch the screen and get it on no sound, the screen are not lock, is that possible

I have problem with my Iphone 5, when I talk my ear allways tuch the screen and get it on no sound, the screen are not lock, is ti possible to lock the screen when incomming an outgoing call going on

Hello Mogulman46,
So what that means is when you have Do Not Disturb turned on, you may have an alert depending on the setting and how you are using your iPhone. So if it is set to Always, then that means that no matter what, your iPhone will not be notified. If it set to Only while the iPhone is locked, then that means that you will not get notification when your iPhone is locked but you will get notifications if your iPhone is being used. Also keep in mind the settings All Calls From can be set to certain contacts like Favorites, Everyone or no one. If you are using Do Not Disturb and you do not need it, then turn it off.
Use Do Not Disturb on your iPhone, iPad, or iPod touch
http://support.apple.com/kb/ht5463
Regards,
-Norm G.

New tab and close tab buttons are not enabled

On firefox page, new tab and close tab buttons are not neabled and right click shows the same functions as not available.

Try the Firefox SafeMode to see how it works there. <br />
''A troubleshooting mode, which disables most Add-ons.'' <br />
''(If you're not using it, switch to the Default Theme.)''
* You can open the Firefox 4.0+ SafeMode by holding the '''Shft''' key when you use the Firefox desktop or Start menu shortcut.
* Or use the Help menu item, click on '''Restart with Add-ons Disabled...''' while Firefox is running. <br />
''Don't select anything right now, just use "Continue in SafeMode."''
''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before using the Firefox shortcut (without the Shft key) to open it again.''
'''''If it is good in the Firefox SafeMode''''', your problem is probably caused by an extension, and you need to figure out which one. <br />
http://support.mozilla.com/en-US/kb/troubleshooting+extensions+and+themes
''When you figure out what is causing that, please let us know. It might help other user's who have that problem.''

Tab rulers are not locked to text blocks

Similar Messages

Maybe you are looking for