Tab Set Container

Dear Xcelsius experts:
do you know if there is a way to hide a component outside of tab set depending on what tab i chose?
i have a combo box that drives the data on tab 1 and tab 3 (when i chose element from combo box on tab 1, i would like it be chosen in the combo box on tab 3 appropriately and vice versa, but do nto seem to be able to do it). and i would like to have this combo box invisible when i chose Tab2.
any ideas will be highly appreciated
thank you

Hi anache1,
I had the same issue but I solve this but different approach like
I used three panels in the 3 tabs
so I use combo box in tab 1 and tab 3 but not in tab2
I achieved the next problem if selection made in Ist tab combo  should effect 3rd tab combo box by
Go to-->properties of both combo boxes in tab 1 and tab 3 >behaviour>selected items
Type: Dynamic
Item: lable as per your choice(Like Destination Cell of combo box)
By this what ever you select in combo box of 1st tab will  same thing will select by combo box of 3rd tab

Similar Messages

  • Insert new tab at front of Tab Set Container

    In Xcelsius 2008, I have an existing Tab Set Container with four tabs.
    Based on user feedback, I need to add an additional tab at the front/first position of the previously created tabs.  I can click on the first existing tab and insert, but the "new" tab is in the "second" position and I cannot seem to move it.
    Is there a capability I'm missing that allows me to order the tabs in the Tab Set or re-order to my custom preferences? 
    Or am I going to have to start from scratch? 

    Hi Brent,
    To get the new tab added on the first position, add the tab as you are doing.
    Then go to the object browser,expand the TAB SET.
    Select the tab which you want to set on first or any position and then use the "UP/DOWN-Arrow mark" present at the bottom of the Object browser window.
    This will enable you to move the tab to any location you want.
    Thanks,
    Amit Mathur.
    Edited by: Amit Mathur on Dec 30, 2008 9:05 PM

  • Tab Set Container - Performance

    How do we formally request performance improvements to Xcelsius team? via the forum?
    We would like to request that the performance of the tool be improved when using a tab set container.
    Created 5 tabs, each contain data.  We noticed that this is slow upon upload which makes it
    pretty unusable for our purposes.
    thank you
    Nancy Griffin

    Seconded.  That feature is not very useful in its current state unless you are working with very small projects.  Is it going to be addressed?
    Although I have no knowledge whatsoever about whether or not the performance will be improved in a Fix Pack or Service Pack, I would recommend not holding your breath and switch over to using Dynamic Visibility instead.  Not nearly as easy to work with for the developer, but the end users would not know the difference.

  • Tab Set Container Hyperlink?

    Hi,
    I have a xcelsius 2008 dashboard using a tab set with a container per tab. Is it possible to hyperlink from within each container to a different tab set selection?
    So if I have three tabs, one container dashboard visual for each, and under the first tab container we wanted to quickly hyperlink to the second or third tabs (without clicking the above tab sets at the top). Is this possible?
    Thanks in advance!
    phil

    HI
    Using Tabset component it is might not possible
    But I have tricky way to achive it let me explain
    Use 3 push butons and three panelContainers).
    make it arrange these 6 six components like tabset view
    and for push button 2 source is 'panel2' destination is one empty cell(a2)
    cell a1:panel2
          a2:
    dyanmic visibility status is cell a2 and key is panel2(which is under second push button) for pannel two
    did same for push button 1 and3but use destination cell same a2  in cell a2 write text pannel1(it is defualt)
    now when ever user click that particular tab it will display correct panel
    now second requrierment is going from panel 1 to panel 2
    so in panel use one more push button source is  pannel2 and destination is same cell a2
    and make push button trasparent (properties>apperance>layout) put transperecy 100% then it will not visible
    same workarround you have to do for remaining panel also
    I think you understand my logic,If you understood reply back
    Edited by: venkatsapbi on Dec 15, 2011 10:42 AM

  • Tab set index

    Hello,
    Is it possible to get the selected item for a tab set ?
    Best Regards
    Franck Lugand

    Hi Franck,
    I realise this has been marked as complete but there is a simple(ish) workaround you can use as follows:
    Chose a cell to contain the index of the selected tab - you can make this text or a number whatever you require e.g. $A$1
    Next reserve three side by side columns with enough rows for each tab item and set up with the formula = $A$1 in the first column, the text that you want to be returned based on the selected tab in the second column and the formula =IF($A$1=$B3,1,0)  in the third column e.g.:
         A          B               C
    3     =$A$1          Tab 1 Selected          =IF($A$1=$B3,1,0)
    4     =$A$1          Tab 2 Selected          =IF($A$1=$B4,1,0)
    5     =$A$1          Tab 3 Selected          =IF($A$1=$B5,1,0)
    Next in each tab insert a toggle button.  Resize the toggle button to the full size of the tab canvas - make sure that it is on top of all other components i.e. appears furthest down in the tree on the left.  Set the transparency to 100%, disable displaying the labels and set toggle on Mouse Over.  Bind the source data a follows:
    Button on Tab 1 = $A$3:$B$3
    Button on Tab 2 = $A$4:$B$4
    Button on Tab 2 = $A$5:$B$5
    Bind the target cell for all buttons to cell $A$1
    Set the dynamic visibility as follows
    Button on Tab 1 = Status: $C$3, Key: 1
    Button on Tab 2 = Status: $C$4, Key: 1
    Button on Tab 3 = Status: $C$5, Key: 1
    That's it.  Now simply look at cell $A$1 to see what tab is selected.  This works by simply showing an invisible toggle button which disappears as soon as it is scrolled over whilst updating the cell $A$1 at the same time.
    It should be noted that this method does have the limitation where if the user selects a tab but then the mouse never goes over the tab area you will not know which tab was selected.
    Also - Phil  I've answered the question re push buttons in [your other thread|Tab Set Container Hyperlink?;.
    Regards,
    Paul

  • Display the panel container when user select the specific tab in a tab set

    Hi SAP Experts,
    I've faced some problems and i would like to seek some help from the experts.
    Basically, my requirement is to display the component "panel container" which contains some data whenever a user select e.g. Tab "A" of my component Tab set. Similarly, it hides again when the user select Tab "B" and another panel container appear for it.
    I am not sure if this is achievable in Xcelsius. Experts, please advise me.
    Your help will be greatly appreciated!
    Thanks a lot!
    Feel free to clear any doubts with me
    Best regards,
    htoh

    actually, you can not do that, since you dont have a reference of the current selected tab

  • Container - Tab Set

    I've created a container with 6 tab sets.  Each  has data in it.
    1) is it possible to re-arrange the order of the tab sets without loosing the data I already have?
    2) Let's say I want to delete the 3rd tab (out of 6).  Is it possible to do that?  When I click the minus sign, it always deletes the last tab I have
    thank you
    Nancy Griffin

    Hi nancy,
    1) is it possible to re-arrange the order of the tab sets without loosing the data I already have?
    Answser: Open Object Browser if it's not open (View->Object Browser), click "+" of the subset, select one child tab, then you can click the arrows at the bottom to move up/down the subtab.
    2) Let's say I want to delete the 3rd tab (out of 6). Is it possible to do that? When I click the minus sign, it always deletes the last tab I have
    Answer: Select one subtab in Object Browser and then delete it.

  • Threadinar10 - Page Separator, Page Fragment Box , Tab Set & Tab Components

    Hi All,
    This is the tenth in the Threadinar series. See the Components Threadinar Index at http://forum.sun.com/jive/thread.jspa?threadID=103424 for the complete list to date.
    This Threadinar will discuss 4 components in the "Components Palette: Layout Section" section of the Creator Component Catalog.
    The components we will focus on today are
    "Page Separator", "Page Fragment Box" , "Tab Set" & "Tab" Components.
    Let us begin our discussion with the "Page Separator" Component.
    Page Separator Component
    You can drag the Page Separator component from the Palette's Layout category to the Visual Designer to create a horizontal line that resizes to any page width selected by the user. This component is the visual equivalent of an HTML <hr> tag.
    In the page bean, a Page Separator component is a PageSeparator object.
    * Note: If you want to use an HTML <hr> tag, drop a Meta component on the page and set its tag property to hr.
    [b]Page Fragment Box Component
    This component enables you to include a page fragment in a page. A page fragment is a separate, reusable part of a page that can be included in any number of pages. For example, you might want to put a common a visual element like a header graphic in a page fragment and then include it in all the pages in an application.
    When you drag the Page Fragment Box component from the Layout category of the Palette and drop it on a page, the Select Page Fragment dialog box prompts you for the name of the page fragment to be included. You can enter the name of an existing page fragment or create a new page fragment. If you create a new page fragment, the IDE gives the new fragment a .jspf file suffix and creates a node for it in the Projects window, as well as adding the page fragment to the Outline window.
    * Note: A Page Fragment Box component simply includes a page fragment in a page. Deleting a Page Fragment Box component from a page does not delete the page fragment itself, even if you originally used the Select Page Fragment dialog box to create the page fragment.
    After dropping a Page Fragment Box component on the page, if you click inside the component, you see the properties for the included fragment. If you click the border of the component, you see the properties for the enclosing <div> block. You can also use the Outline window to select the enclosing block, the page fragment, or the components in the page fragment. In the Outline window, the Page Fragment Box component is represented by a node named directive.include:fragment-file.jspf, where fragment-file is the name of the page fragment file.
    If you double-click the page fragment, it opens as a page in the Visual Editor, enabling you to edit it like a regular page. The page fragment has an associated JavaBeans object, a page fragment bean, which you can edit by clicking the Java button at the top of the page fragment when it is open in the Visual Editor. As with a regular page, if you drop a component like a button in a fragment, double clicking adds an event handler in the page fragment bean, enabling you to reuse the code on any page to which you add the page fragment. A common scenario for reusing component code would be a Search Box fragment that has a search Label, a Text Field where the user enters the search string, some Inline Help, and search logic code in the page fragment bean.
    * The tab order of the components in the page is unlikely to work properly unless you enclose the entire page fragment box in the Faces Verbatim component.
    For more details see tutorial : "Using Page Fragments"
    http://developers.sun.com/prodtech/javatools/jscreator/learning/tutorials/2/pagefragments.html
    [b]Tab Set Component
    The Tab Set component in the Palette's Layout category is a container for a set of Tab components. Typical uses of a tab set are:
    * To provide alternate sets of components on the same page and enable the user to navigate to them by clicking on tabs. The user sees only the components under the currently selected tab. For more information on adding components to tabs, see Tab Component.
    * To navigate among a set of pages. If you use a tab set this way, you would usually have the tab set near the top of each page with the component's width set at 100%. You would use the Page Navigation editor to define each tab to display a page in the application, with the current page's tab set as the selected tab. In addition, you would need to delete the default Layout Panel component under each tab so the tab would display the page contents.
    You can set Tab Set properties in the component's Properties window.
    A Tab Set component contains Tab Components, and Tab components can contain other Tab components. You can see these components displayed as hierarchical nodes in the Outline window after you add a Tab Set to your page.
    You can add a new tab to a tab set in two ways, by right-clicking the Tab Set component and choosing Add Tab or by dropping a new tab component on the Tab Set or on a Tab component.
    You can drop a new tab component on a tab set in the Visual Designer to the right or left of existing tabs to create a new tab at that level. The tabs in a tab set can also be containers for other tabs. If you drop a Tab component on an existing tab, the new tab becomes a child of the tab on which you dropped it. The maximum number of levels for tabs is three.
    The tab set component determines which tab is rendered as selected, storing the value in the selected property. By default, the selected property is set to the first tab created for the component. If you click a tab while designing your web page, that tab becomes the selected tab. You can tell during design time that a tab is selected because its color changes.
    [b]Tab Component
    A Tab is part of a Tab Set component. You can add a new tab to a tab set in two ways, by right-clicking the Tab Set component and choosing Add Tab or by dragging a new Tab component from the Layout category of the Palette and dropping it on the Tab Set or on another Tab component. You can also drag from the Palette and drop the tab on the tab set's nodes in the Outline window.
    * If you drop the Tab component to the left or right of an existing tab, it is added to the same row of tabs.
    * If you drop the Tab component on an existing tab, the dropped tab becomes a child tab of the tab on which you drop it unless the existing tab is a third level tab. You can have at most three levels of tabs in a tab set.
    o Note: You cannot add a child tab to a tab that has components in its Layout Panel. When you drop a tab on an existing tab component that has an empty Layout Panel, the empty Layout Panel is deleted to make room for the dropped tab.
    By default, a Tab component has a Layout Panel below it where you can drop components that will be displayed when the user selects the tab. The Layout Panel by default has its panelLayout property set to Grid Layout, meaning that components dropped on the panel are aligned at the location where they are dropped. You can change the layout behavior by setting the panelLayout property to Flow Layout, which aligns dropped components left to right in rows. For more information on Layout Panel properties, see Layout Panel Component Properties Window.
    To select a tab in a tab set, either click the Tab component on the page or select the Tab component's node in the Outline window. To select the whole tab set, either click the border of the Tab Set component on the page or select the tab set's node in the Outline window. Alternatively, you can select a Tab component and either press Escape or right-click and choose Select Parent to select its parent component.
    * Note: If you select a tab on a page in the Visual Designer, a side effect is that it becomes the selected tab. If this effect is not what you want, select the tab in the Outline window so you can set its properties.
    You can drag tabs in the Outline window to change their location and level in the tab set.
    Some typical uses of tabs:
    * You can drop components on the Layout Panel component below a tab to enable a set of components to be displayed below each tab. When the user selects a tab, they see only the components that are associated with the tab, without having to change pages.
    * You can use a tab set to navigate among a set of pages. Each tab component links to a page in your web application. You would use the Page Navigation editor to define each tab to display a page in the application, with the current page's tab set as the selected tab. If you want to use the tab set for page navigation, be sure to delete each tab component's Layout Panel.
    You can also right-click the Tab component and choose one of the following options:
    * Edit action Event Handler. Code the action event handler, the method that is called when the user clicks the tab. This method determines which page or resource to open based on specified conditions. The action method typically processes mouse clicks and returns a string indicating the name of a page navigation case (the page in your application to display next). The default name for the method is tab-id_action, where tab-id is the value of the tab's id property.
    * Bind to Data. Dynamically set the text that appears on the tab. You can bind the component's text property to an object or a data provider, as described in the topic Bind to Data Dialog Box.
    * Property Bindings. Opens a dialog box that enables you to bind properties of the component in addition to the text property to other objects or bean properties that update this component's properties automatically.
    [b] Please join in and share your comments, experiences, additional information, questions, feedback, etc. on these components. <br><br>
    Thank you for your participation

    The following blog has a mini tutorial on using a tab set in a page fragment for page navigation:
    http://blogs.sun.com/divas/entry/tabbing_thru_the_tulips
    A reader commented that the mini tutorial needed to be improved upon to show how to keep the tab state and navigation state in synch.
    How would you do it? If you have a good example, maybe post it to this thread.
    Also, there is no tab tutorial but it is on the priority list. What would you like a tab tutorial to show how to do?

  • Tab Set usage

    Can anyone point me to a tutorial or give me an example of how to use tab sets?
    I have created a tab set with 3 tabs. Each contains a few components.
    My immediate problem is that I do not know how to navigate between tab pages.
    Coming from an application / applet environment, I kind of naively assumed that if you clicked on a tab, that tab page would be revealed.
    I guess there is a bit more to it, but I did not find anything useful in the JSC2 help or in this forum (at least back to May 1).
    My next problem will be to cynamically add tabs based on the options selected in the first tab page.
    But I am willing to wait on that if I can get an answer to the first question.

    I'm using ui:tabSet for the container and ui:tab for the tab pages.
    They are in the Layout section of the Palette in JSC2

  • Auto-Wrap for Tab Set...

    Is there any way to "auto-wrap"
    or "maually wrap" the tabs
    to the next line...
    I have 9 TABs in one tab set
    and it displays stretch
    really far to the right
    of the browser...
    I'd rather show them
    on a 2nd line.

    Kathryn,
    Well, how good is your html / css? I am not guarantying anything here, but maybe I can point you in the right direction(s).
    1a. Do you really need 9+ tabs? How about 2 levels of tabs, so you can have main categories (parent tabs) with sub-categories (standard tabs) Look to amazon.com for inspiration here.
    1b. If 2 levels of tabs aren't your cup of tea, how about a "List" for second level navigation?
    2. OK, so you don't like my first 2 suggestions and you're a glutton for punishment (and you are really good at html / css, and you have a lot of time on your hands)? You can probably make tabs out of nothing but div's: An outter div to contain the tabs and a div inside for each tab. You'll need to get familiar with (read: beat your head against the monitor for hours on end) the float, clear ,and position css elements and their various attributes. Since browsers don't play by the same rules, you'll likely need to resort to some hacks, such as the voice-family or html>body hack found at:
    http://glish.com/css/hacks.asp
    Here are some other links for inspiration:
    http://clagnut.com/sandbox/csstabs/?writingtext=csstabs
    http://glish.com/css/1.asp
    http://homelesspixel.de/tabs/
    http://htmldog.com
    http://simplebits.com
    http://alistapart.com
    http://zeldman.com
    The last 3 should be bookmarked in your RSS reader. If you are here, you are a web developer. The more you know about html (xhtml), the better your web apps will be, no matter what technology they are written.
    Good luck,
    Tyler

  • I have tabs set to open a blank tab, but now each new tab has google search on it.

    I don't have google selected as a search engine - I won't use google. I have tabs set to open up a blank tab each time. I want a blank tab, without the google search bar.

    '''''about:home''''' isn't used for new tab by default.
    The default for the '''browser.newtab.url''' preference is '''''about:newtab'''''. The 3x3 grid of previously viewed webpages can be hidden by using the "Grid" button in the upper-right corner; but as of Firefox 31 a "search container" appears, which isn't hidden via the "Grid" button.
    Changing the '''browser.newtab.url''' preference to '''''about:blank''''' should give you a completely blank page when opening a new tab.

  • Bind a data on a Tab set component

    Hello all people!
    Sorry for my dirty English!
    I've created a little intranet and would use a tab set component for a view of the data in mysql datasource!
    But if I put in the tab set the Property Sheet component and bind it to dataProvider, the init() of the java file not run!
    Can I use the propety sheet with tab set?
    If the response is "YES"; Why this don't work?
    Also I did use a page fragment for any tab?
    thank's a lot!

    I need more info. A property sheet is a container just like group or grid but its structured into layers: Property Sheet, then Property Sheet section, and then Property.
    Property's are ment to contain one or more components. There is a bug that you cannot drag/drop a component right on a property, you have to use the outline window to get them there).
    What exactly did you bind to in the property sheet component? Which part? What other fields are on the tabs?
    Please add a MessageGroup component to the page and re-run to see if you get any errors that may help..
    Thanks,
    Lark

  • How can I create a new standard tab set?

    I have a tab set right now with one tab in it. How can I create a new tab set in an existing page with different tabs in it? Thanks.....

    Hi,
    Refer:
    http://proskudin.blogspot.com/2007/06/two-level-tabs.html
    Regards,
    Kartik Patel
    http://patelkartik.blogspot.com/
    http://apex.oracle.com/pls/apex/f?p=9904351712:1

  • Export to Word loses tab setting

    Post Author: HmCody
    CA Forum: .NET
    I am very new to Crystal Reports with VS.net and have run into a problem that I hope isn't a bug.
    I am creating a report that needs to be able to be exported to Word (it gets sent to the printer for inclusion in a program).  Several of the text objects are formatted with right tabs set at the right edge of the object.  Everything lines up perfectly when the report is viewed in the Report viewer and when I export to a pdf, but when I export to Word the right tabs are converted to left tabs and the text aligned to them is out of view.
    Anyone have a clue as to why this is happening and if there is a way to fix it?
    Thanks for your help.
    Helenmary

    Sorry - no pointers. Other than patience - this is a known issue, probably to be addressed in Service Pack 3 of Crystal reports. See Kb [1643979 - Crystal Reports for Visual Studio 2010 does not look for ForceLargerFonts registry key|http://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes_boj/sdn_oss_boj_bi/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/scn_bosap/notes%7B6163636573733d36393736354636443646363436353344333933393338323636393736354637333631373036453646373436353733354636453735364436323635373233443330333033303331333633343333333933373339%7D.do]
    I have seen one or two reports of people using the below KBase with success (you'll have to modify the reg key to reflect CRVS2010). But most have no success. Testing this I did not have any success either, nor did I see the CRVS2010 engine looking for any of the keys noted in the KB....
    [1644563 - How to create the ForceLargerFonts registry key when using Crystal Reports 2008 (12.x)|http://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes_boj/sdn_oss_boj_bi/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/scn_bosap/notes%7B6163636573733d36393736354636443646363436353344333933393338323636393736354637333631373036453646373436353733354636453735364436323635373233443330333033303331333633343334333533363333%7D.do]
    Ludek
    Follow us on Twitter http://twitter.com/SAPCRNetSup
    Got Enhancement ideas? Try the [SAP Idea Place|https://ideas.sap.com/community/products_and_solutions/crystalreports]
    Edited by: Ludek Uher on Jan 19, 2012 6:37 AM

  • Ignore Tab-Setting in a JTextPane

    Hello,
    i have a JTextPane and I need a Tab Size 0. I want to ignore the Tab-Setting, cuz I got an XML-Editor, with automaticaly indent.
    Does anyone Have an Idea ?

    This thread might help:
    http://forum.java.sun.com/thread.jsp?forum=57&thread=331679

Maybe you are looking for